A general access error occurred while accessing your central configuration

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

Страницы: [1]   Вверх

Openoffice general access error

Post by spiderlady56 » Tue Jul 22, 2014 10:21 pm

When I turned on my computer this morning, the OpenOffice (which is set to automatically launch) did not launch and I received a message that reads:

«OpenOffice 4.1.0 Fatal Error
The application cannot be started.
A general error occured while accessing your central configuration.»

I figured it was just hanging up somewhere so I rebooted the computer and then got the same error message. I have since uninstalled and re-installed my OpenOffice, but I keep getting this darned error message! Help!! I really need to access my documents and the message is all I get.

Re: Fatal error

Post by floris v » Tue Jul 22, 2014 10:37 pm

Re: Fatal error

Post by spiderlady56 » Tue Jul 22, 2014 11:47 pm

Re: Fatal error

Post by floris v » Tue Jul 22, 2014 11:48 pm

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 12:22 am

Re: Fatal error

Post by floris v » Wed Jul 23, 2014 12:23 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 12:30 am

Re: Fatal error

Post by Bill » Wed Jul 23, 2014 1:40 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 1:45 am

Re: Fatal error

Post by Bill » Wed Jul 23, 2014 8:37 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 9:22 am

Re: Fatal error

Post by RoryOF » Wed Jul 23, 2014 9:27 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 9:43 am

Re: Fatal error

Post by RoryOF » Wed Jul 23, 2014 10:05 am

You rename a folder the same way as you rename a file. Go to the folder above the folder you wish to rename — for example, take the chain
c:TomDickHarry
Suppose you want to rename folder Harry.
Click on the C: drive and select menu item View : icons
You will see pictures of folders

. Tom .
Double click on folder Tom and you get a similar picture

. Dick .
Double click on folder Dick and you get a similar picture

. Harry .
Now, you right click on folder Harry and select Rename.

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 10:50 am

RoryOF wrote: You rename a folder the same way as you rename a file. Go to the folder above the folder you wish to rename — for example, take the chain
c:TomDickHarry
Suppose you want to rename folder Harry.
Click on the C: drive and select menu item View : icons
You will see pictures of folders

. Tom .
Double click on folder Tom and you get a similar picture

. Dick .
Double click on folder Dick and you get a similar picture

. Harry .
Now, you right click on folder Harry and select Rename.

I’m fairly certain that I was able to do as you suggested. I tried to launch my OpenOffice, but I got the original error message that started this whole thing. I then went back to the folder location and there was a new folder titled «user»!! Within this folder are other folders titled «>extensions>bundled>registry». Is this supposed to happen?

I’m feeling more and more lost all the time! The original file that I renamed has all these same items in it but a separate folder has different folders inside it like autotext/backup/basic/config/etc. Am I in the wrong area??

Источник

Openoffice general access error

Post by hmunn » Tue Aug 17, 2010 11:19 pm

I have just installed OOo 3.3.0 and it worked fine. After I shut down my computer and restarted, I now receive the following error message: «The application cannot be started. A general error occurred while accessing your central configuration.»
I have tried uninstalling and downloading and re-installing, but I still get the same error message.

Any ideas what is going on?

I uninstalled using Add-Remove programs as before, but this time I manually deleted all file folders in /Application Data and /Program files named OOo-dev. 3.3.0 Beta now installed properly.

Re: A general error occurred while accessing your central co

Post by thomasjk » Tue Aug 17, 2010 11:23 pm

Re: A general error occurred while accessing your central co

Post by hmunn » Tue Aug 17, 2010 11:27 pm

Yes, knew it was in Beta. But it’s hard to test if it won’t open! I liked what I saw before this error message started.
No, I didn’t uninstall the previous version, which was 3.2, because I still need to use it in case 3.3 doesn’t work.
Is there some way to continue to use 3.2 while testing 3.3?

Re: A general error occurred while accessing your central co

Post by Bill » Wed Aug 18, 2010 2:16 pm

Re: A general error occurred while accessing your central co

Post by hmunn » Wed Aug 18, 2010 4:18 pm

Yes, I can still use 3.2.1. My query about uninstalling was my response to thomasjk’s question about whether I had uninstalled the previous version. I don’t want to have to uninstall the previous version in order to test 3.3.0.

I’m still in the dark about what «accessing your central configuration» means or what I can do to get 3.3 running again.

Thanks for the suggestion.

Re: A general error occurred while accessing your central co

Post by franx » Wed Aug 18, 2010 4:57 pm

I’ve never seen this error message.
You have customized 3.3 beta?
You have added an extension?
You have modified the default user profile (. OOo-dev/3/user. )?

If yes, please go into detail.

You might try:
(1) close OOo (if active + quickstarter), and rename registrymodifications.xcu [in the folder user] to registrymodifications.xcu.old. Restart OOo.

(2) close OOo (if active + quickstarter), and rename the folder user to user_old. Restart OOo.

But I’m uncertain whether that will succeed .

Re: A general error occurred while accessing your central co

Post by acknak » Wed Aug 18, 2010 5:32 pm

Re: [Solved] A general error occurred while accessing your g

Post by franx » Thu Aug 19, 2010 12:27 am

acknak, thanks for the link.
Looks interesting.

But at first glance: it’s all Greek to me.
I’ll write a request for an one-week-vacation.
And then I’ll read this entire app.cxx.

I think, there’s a lack of information by «hmunn» for finding the cause of the error message—and the issue is resolved.

Re: [Solved] A general error occurred while accessing your g

Post by esperantisto » Tue Aug 24, 2010 4:49 pm

I have a similar issue with OOo 3.3 beta 1 on Windows 7 Pro Russian. I have installed it and everything seemed fine until I updated one of my extensions (it’s a spell check extension for Belarusian actually). I updated the extension both for OOo 3.2.1 and 3.3 b1, with 3.2.1 everything was fine, but 3.3 b1 after closing refused to start again issuing the above error message. OK, I deleted all personal data for 3.3 b1 and copied them from 3.2.1. Then 3.3 started without problem. I gave another try and updated the extension once more. Again, updating resulted in inability to restart OOo and the above error message.

I guess, it’s a bit premature to close the issue.

Re: [Solved] A general error occurred while accessing your g

Post by esperantisto » Tue Aug 24, 2010 5:06 pm

Re: [Solved] A general error occurred while accessing your g

Post by franx » Tue Aug 24, 2010 8:09 pm

Only a first info:
(. because I had similar issues with e.g. AltSearch.oxt since DEV300_m76 –
«The application cannot be started. The user interface language cannot be determined.»)

I tried a test with TemplateChanger (OOo 3.2.1 and OOO330_m5)
[due to Issue 114091]

My steps:
(1) reset the user profile of OOo 3.2.1 to default, add the extension TemplateChanger 1.2.3,
restart OOo 3.2.1 and close it
(2) rename the user profile of OOO330_m5
(3) copy the user profile of OOo 3.2.1, add it as the user profile of OOO330_m5

(4) start OOO330_m5, open the Extension Manager, check for updates

(6) restart OOO330_m5

No error message .

You might update 3.3.0 Beta 1 (OOO330m3) with OOO330_m5, and try again.
[see also: Release Notes for all OpenOffice.org builds → Release codeline OOO330 (OOo 3.3.0)]

EDIT: [2010-08-25]
The same result with a second test.
This time I’ve filled the template folder with some templates.
. applied TemplateChanger 1.2.3 to a document in OOo 3.2.1.
. pasted the user folder of OOo 3.2.1 in OOO330_m5.
. applied TemplateChanger 1.2.3 to a document in OOO330_m5.
. checked for updates.

No errors during update and restart.
TemplateChanger 1.2.5 works well in OOO330_m5.
[I’ve no longer installed 3.3.0 Beta 1.]

Источник

Openoffice general access error

Post by spiderlady56 » Tue Jul 22, 2014 10:21 pm

When I turned on my computer this morning, the OpenOffice (which is set to automatically launch) did not launch and I received a message that reads:

«OpenOffice 4.1.0 Fatal Error
The application cannot be started.
A general error occured while accessing your central configuration.»

I figured it was just hanging up somewhere so I rebooted the computer and then got the same error message. I have since uninstalled and re-installed my OpenOffice, but I keep getting this darned error message! Help!! I really need to access my documents and the message is all I get.

Re: Fatal error

Post by floris v » Tue Jul 22, 2014 10:37 pm

Re: Fatal error

Post by spiderlady56 » Tue Jul 22, 2014 11:47 pm

Re: Fatal error

Post by floris v » Tue Jul 22, 2014 11:48 pm

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 12:22 am

Re: Fatal error

Post by floris v » Wed Jul 23, 2014 12:23 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 12:30 am

Re: Fatal error

Post by Bill » Wed Jul 23, 2014 1:40 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 1:45 am

Re: Fatal error

Post by Bill » Wed Jul 23, 2014 8:37 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 9:22 am

Re: Fatal error

Post by RoryOF » Wed Jul 23, 2014 9:27 am

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 9:43 am

Re: Fatal error

Post by RoryOF » Wed Jul 23, 2014 10:05 am

You rename a folder the same way as you rename a file. Go to the folder above the folder you wish to rename — for example, take the chain
c:TomDickHarry
Suppose you want to rename folder Harry.
Click on the C: drive and select menu item View : icons
You will see pictures of folders

. Tom .
Double click on folder Tom and you get a similar picture

. Dick .
Double click on folder Dick and you get a similar picture

. Harry .
Now, you right click on folder Harry and select Rename.

Re: Fatal error

Post by spiderlady56 » Wed Jul 23, 2014 10:50 am

RoryOF wrote: You rename a folder the same way as you rename a file. Go to the folder above the folder you wish to rename — for example, take the chain
c:TomDickHarry
Suppose you want to rename folder Harry.
Click on the C: drive and select menu item View : icons
You will see pictures of folders

. Tom .
Double click on folder Tom and you get a similar picture

. Dick .
Double click on folder Dick and you get a similar picture

. Harry .
Now, you right click on folder Harry and select Rename.

I’m fairly certain that I was able to do as you suggested. I tried to launch my OpenOffice, but I got the original error message that started this whole thing. I then went back to the folder location and there was a new folder titled «user»!! Within this folder are other folders titled «>extensions>bundled>registry». Is this supposed to happen?

I’m feeling more and more lost all the time! The original file that I renamed has all these same items in it but a separate folder has different folders inside it like autotext/backup/basic/config/etc. Am I in the wrong area??

Источник

Openoffice general access error

Post by White Phoenix » Fri Oct 28, 2016 11:05 pm

I install AOO 4.1.3 on Linux and Windows 7. Everything seemed okay, but the Windows version complained about the Java not being right. However, it closed before I could go into Tools and fixed it and refuses to open. I even re-installed and disabled the user profile. It still gives the following message:

A general error occurred while accessing your central configuration.

This gives me no clue as to what it wants, and for a while I thought I had been tricked into downloading a fake, but no there really is a 4.1.3 and I did go to the official download site. So what is the “central configuration” that is being referred to?

UPDATE: I just tried to access the LibreOffice that is installed on my Windows 7. It is giving the same error message. Fortunately, whatever is wrong only affects Windows, not Linux.

Re: General Error / Central Configuration AOO 4.1.3

Post by Bill » Sat Oct 29, 2016 10:17 am

Re: General Error / Central Configuration AOO 4.1.3

Post by White Phoenix » Sat Oct 29, 2016 3:33 pm

So it’s a bug. I just figured AOO needed to be pointed to the correct file which is why I wasn’t looking for that fix. It didn’t seem to be a real problem.

So, I will replace the 64 bit DLL file with the 32 bit version and see what happens. Thank you for pointing out that the Java problem was more serious than I thought.

Yes, that was the problem with AOO not wanting to run also. I had to replace the bad file in the program subfolder though. There were a lot of 32 bit MSVCR100.DLL files throughout my system. So I guessed that AOO had to have it in its folder. LibreOffice still doesn’t work, but I will get around to that eventually. maybe.

Re: General Error / Central Configuration AOO 4.1.3

Post by Bill » Sat Oct 29, 2016 6:00 pm

Re: General Error / Central Configuration AOO 4.1.3

Post by White Phoenix » Mon Oct 31, 2016 12:01 am

Thanks I will check, although of all the places msvcr100 was, I don’t recall it being in SysWOW64. So naturally if it isn’t there, it cannot be found there. I have the file backed up in my Archives folder in any case.

I am in the Windows side of my system now. Um. Wouldn’t a 32 bit DLL file be in System32 instead of SysWOW64?

Re: General Error / Central Configuration AOO 4.1.3

Post by Bill » Mon Oct 31, 2016 2:02 am

White Phoenix wrote: . of all the places msvcr100 was, I don’t recall it being in SysWOW64. So naturally if it isn’t there, it cannot be found there. I have the file backed up in my Archives folder in any case.

I am in the Windows side of my system now. Um. Wouldn’t a 32 bit DLL file be in System32 instead of SysWOW64?

Re: General Error / Central Configuration AOO 4.1.3

Post by White Phoenix » Fri Dec 30, 2016 4:01 pm

I think you have that backwards, right? The 64 bit DLL would be in WOW64 and the 32 bit DLL would be in System32. The other way around doesn’t make sense.

True, I have a 64 bit system, but AOO is a 32 bit program. So it everything about it is treated as if you are using a 32 bit system. That is why the 64 bit DLL in its program folder is causing the problems. As you pointed out the program would look in its own program folder first for any DLL files it needs.

Just putting the 32 bit DLL file in WOW64 would be wrong for three reasons. First, AOO would look in its program folder and find the 64 bit version and fail. Second, 32 bit files do not go in WOW64, but in System32. Third, other programs may be using the 64 bit version, so if you replace it with the 32 bit version, that is going to cause a problem.

If the 64 bit DLL file is deleted from the 64 program file AOO should then look in System32. If it isn’t there, it might look in WOW64, but that would not make sense for a 32 bit program to look for a 32 DLL file there.

But if you are going to delete the 64 bit version from the AOO program file, why not just put the 32 bit version (which would have been installed there by AOO anyway) in the program folder? So that is what I did.

Re: General Error / Central Configuration AOO 4.1.3

Post by jaragon » Fri Dec 30, 2016 7:22 pm

No, actually, he doesn’t have it backwards. 64-bit DLLs would be in System32 and 32-bit DLLs would be in SysWOW64. «WOW64» stands for «Windows-on-Windows 64» and it’s the component that allows 32-bit programs to run on a 64-bit system, so the things in this folder are for 32-bit programs despite the name.

Re: General Error / Central Configuration AOO 4.1.3

Post by White Phoenix » Fri Dec 30, 2016 8:13 pm

Re: General Error / Central Configuration AOO 4.1.3

Post by Bill » Sat Dec 31, 2016 5:19 pm

Microsoft has published Information online about the use of System32 for 64-bit and SysWOW64 for 32-bit in 64-bit Windows. A Google search including the two terms should clear up any misconception.

Re: General Error / Central Configuration AOO 4.1.3

Post by White Phoenix » Fri Dec 24, 2021 3:33 am

Re: General Error / Central Configuration AOO 4.1.3

Post by Bill » Wed Dec 29, 2021 1:44 am

Источник

Не могу установить OpenOffice. После завершения установки вылазит ошибка «Fatal Error 4.0.1» и под ней надпись: «Невозможно запустить приложение. A general access error occurred while accessing your central configuration». Устанавливаю программу с официального сайта. Только что устанавливала на другой компьютер и все работает, а у меня не хочет.

Binary package hint: libreoffice

localc
OR
lodraw
OR
libreoffice
ETC.

You get the following popup:
«The application cannot be started.
A general error occurred while accessing your central configuration. «
Afterwards, you get the following on the tty:
[Java framework] Error in function createSettingsDocument (elements.cxx).
javaldx failed!

Running as root this doesn’t happen.

Upgrading to the latest did not help.

This same message seems to be plauging people with various different causes.

Stupid message. Which central configuration are you trying to access and how.

I have no ~/.config/.libreoffice-whatever
I do have a ~/.openoffice.org and ~/.openoffice.org2 directories, with correct ownership.
dbus is running, though it had problems earlier (but if it wasn’t running ubuntu-bug would have died).
gnome-settings-daemon has been restarted.
I have not intentionally installed any «extensions».

Workaround: sudo chown -R whitis.whitis /home/whitis/.libreoffice

ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: libreoffice 1:3.3.2-1ubuntu5
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
NonfreeKernelModules: fglrx
Architecture: amd64
CheckboxSubmission: 1e1a99f31ec2933306456e1f141c45d8
CheckboxSystem: edda5d4f616ca792bf437989cb597002
Date: Sat Jun 4 18:04:12 2011
InstallationMedia: Ubuntu 11.04 «Natty Narwhal» — Release amd64 (20110427.1)
ProcEnviron:
 LANGUAGE=en_US:en
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: libreoffice
UpgradeStatus: No upgrade log present (probably fresh install)

1. July 30 2013, 03:58:14 PM

   
   

   #1

   OpenOffice: a general error occurred while accessing your central configuration
   

   So yea, went to start up OpenOffice yesterday after a reboot and I get this error. Did some googling, and I found a lot of dead links, and a lot of bug reports. After digging more, I found something that suggested I delete my user profile, so I did, still the same issue. Ideas?

   

   ---

2. July 30 2013, 04:18:12 PM

   
   

   #2

   

   ---

3. July 30 2013, 04:22:37 PM

   
   

   #3

   Originally Posted by Ralara
   

   torrent ms office 2010

   fyp

   or just dl 2010 professional plus, i can hook you up

   need me?, contact me on Discord (entrox#0001) or via e-mail (entrox@failheap-challenge.com).

   ---

4. July 30 2013, 06:54:12 PM

   
   

   #4

   Hey guys, I’ve got a great idea, let’s tell a cop to steal a few hundred dollars in software.

   the thing from the buzz buzz

   

   ---

5. July 30 2013, 06:55:23 PM

   
   

   #5

   Ask on an OpenOffice specific forum?

   Originally Posted by Amantus

   whats tyhe appear of a shnitifuck cu nt eve onlio9ne corpotraTION DICKOLHEAD FUCKIN AS

   

   ---

6. July 30 2013, 06:58:47 PM

   
   

   #6

   Originally Posted by Dark Flare
   

   Ask on an OpenOffice specific forum?

   Did, was told to delete my user profile, didn’t help. Was wondering if anyone else had a better idea.

   the thing from the buzz buzz

   

   ---

7. July 30 2013, 07:03:56 PM

   
   

   #7

   Pay for microsoft office 2010.

   

   ---

8. July 30 2013, 09:02:48 PM

   
   

   #8

   

   

   ---

   Openoffice….What version are you using? Have you tired Libreoffice (a fork of openoffice when Sun took it over).

   ---

9. July 30 2013, 09:59:39 PM

   
   

   #9

   Office2013
   10$ a month, for that you get the useful office programs and can install them on five of your computer-machines, also hooks into the cloud (where you get more then enough space) so you can have reliable storage of your shit wherever you may be without requiring any technical know-how to configure

   Last edited by Muffinsrevenger; July 30 2013 at 11:34:28 PM.

   ---

10. July 30 2013, 10:30:34 PM

    
    

    #10

    Originally Posted by Cue1*
    

    Originally Posted by Dark Flare
    

    Ask on an OpenOffice specific forum?

    Did, was told to delete my user profile, didn’t help. Was wondering if anyone else had a better idea.

    the thing from the buzz buzz

    It’s open source. you can just fix the problem yourself.

    technology can�t solve economic and political problems

    ---

11. July 30 2013, 10:55:38 PM

    
    

    #11

    have you reinstalled it yet

    

    

    Originally Posted by teds
    

    locking again cos you’re all getting weird and being autists about tyres

    ---

12. July 30 2013, 11:09:45 PM

    
    

    #12

    Which version of OpenOffice do you use, and have you been using other versions before? I think the config directory changed a few times (I still have an soffice.cfg dir somewhere), and maybe after your current profile was broken (and then deleted), it’s trying to access an older configuration that just doesn’t work anymore…

    ---

13. July 31 2013, 12:05:32 AM

    
    

    #13

    Originally Posted by Itiken
    

    It’s open source. you can just fix the problem yourself.

    Also, office 2010

    i heard you’re ideas and their definately good

    ---

14. July 31 2013, 12:14:56 AM

    
    

    #14

    Maybe turn it off and on again ?

    technology can�t solve economic and political problems

    ---

15. July 31 2013, 01:37:56 AM

    
    

    #15

    And if that doesn’t work, do you still have the box your computer came in?
    _{alright, I’m done emulating the typical OSS support forum poster.}

    fake edit: but really, do you have some compelling reason to be using openOffice? In my experience it’s always been a pile of crap. You can probably get a student or educator discount (have flighty hook you up) on office 2010 if you don’t want to borrow a site licensed version. The UI is improved a lot over the crap that was office 2k7, it tends not to break, when it does break there are a lot more people who know how to fix it, and you’ll be able to open and save documents from other people without worrying about screwing up random formatting features. Also, googling «office 2010 how do I do <thing>» will almost always get you results when stuck on how to do something, which I often found wasn’t the case with openOffice.

    i heard you’re ideas and their definately good

    ---

16. July 31 2013, 01:51:42 AM

    
    

    #16

    Originally Posted by Cue1*
    

    Hey guys, I’ve got a great idea, let’s tell a cop to steal a few hundred dollars in software.

    the thing from the buzz buzz

    who said anything about stealing.

    need me?, contact me on Discord (entrox#0001) or via e-mail (entrox@failheap-challenge.com).

    ---

17. July 31 2013, 07:35:01 AM

    
    

    #17

    

    ---

18. July 31 2013, 07:59:53 AM

    
    

    #18

    Originally Posted by Cue1*
    

    Hey guys, I’ve got a great idea, let’s tell a cop to steal a few hundred dollars in software.

    the thing from the buzz buzz

    Just get transfered to detroit apparently it will be standard procedure.

    fone poastin

    ---

19. July 31 2013, 03:13:09 PM

    
    

    #19

    no, seriously.

    i have a key for you (in case you are too dumb to get it)

    need me?, contact me on Discord (entrox#0001) or via e-mail (entrox@failheap-challenge.com).

    ---

20. July 31 2013, 03:17:37 PM

    
    

    #20

    Originally Posted by EntroX
    

    no, seriously.

    i have a key for you (in case you are too dumb to get it)

    If he wont take it I will. My copy has been acting up.

    

    ---