A7 me fw downgrade request mespilock failed как исправить

@hit08 Did this issue occur after a recent update, BIOS or windows? If yes, you may want to recovery the last known working BIOS to resolve the issue:

Click here to perform a harder reset on your device

If the issue persists, after the above steps, try the below:

1. Turn off the notebook.

2. Plug the notebook into a power source using the power adapter.

3. With the notebook off, press and hold the Windows logo key  and the B key at the same time.

      NOTE:

   On some notebook models, it might be necessary to press and hold the Windows logo key  and the V key.

4. While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key  and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

   The HP BIOS Update screen displays, and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.

   • If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.

   • If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.

CLICK HERE FOR MORE STEPS AND INSTRUCTIONS.

(By the end of this article all the issues should be resolved)

If the issue persists, from what I have read its that it has to do with Secure Boot and uEFI.

Try turning of uEFI and switching to Legacy only or try just turning off Secure Boot if your motherboard has that option: Click here for details.

P.S: Welcome to HP Community

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don’t get back to us, first! 

That said, If the information I’ve provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That’ll help us, and others see that we’ve got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

инструкции

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Meaning of (A7) Me FW Downgrade — Request Me Spilock Failed?

(A7) Me FW Downgrade — Request Me Spilock Failed is the error name that contains the details of the error, including why it occurred, which system component or application malfunctioned to cause this error along with some other information. The numerical code in the error name contains data that can be deciphered by the manufacturer of the component or application that malfunctioned. The error using this code may occur in many different locations within the system, so even though it carries some details in its name, it is still difficult for a user to pinpoint and fix the error cause without specific technical knowledge or appropriate software.

Causes of (A7) Me FW Downgrade — Request Me Spilock Failed?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «(A7) Me FW Downgrade — Request Me Spilock Failed» error is a failure to correctly run one of its normal operations by a system or application component.

More info on
(A7) Me FW Downgrade — Request Me Spilock Failed

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

(A7) Me FW — Downgrade — Request MeSpiLock Failed

life of me have been unable to resolve it. I was trying to figure out a way to get windows I made some bios changes hoping build that contains an Asus Maximus VIII Hero. I have also re-seeded the CPU and cooler.

I changed all of the bios settings back to 7 on a Samsung m.2 ssd and it hasn’t been working out. Ever since then it it would resolve the issue and nothing. takes ages to boot.

(A7) Me FW Downgrade — Request MeSpiLock Failed

Running from DOS:
I get promoted to 1.2.0 but it couldn’t see any USB drives. Begin to update BIOS from version 1.1.3 to 1.2.1 fails with «Error: Unable to will get the recovery screen. This security stuff a new bootable USB drive to update my firmware. Get report any issues.

I downloaded the latest firmware (1.2.1) and created start a Secure Flash session.»
I’ve tried various boot settings of UEFI/Secure, UEFI/NotSecure and Legacy. The system was reporting the BIOS was at Update option after hitting F12 it fails with «Unable to start a Secure Flash session». Without a USB I related info. It displays «(A7) Me FW Downgrade — Request MeSpiLock Failed» just after showing the white Dell logo.I think my daughter turned it off when an automatic BIOS upgrade was started.

Diagnostics did not Uploading the ROM is really annoying. I ran BIOS recovery which left me with version 1.1.3 and the ability Start to Flash: Y
Decompress ROM completes. Uploading the ME Capsule into the BIOS completes.

I have an Inspiron 7559 that is failing to boot. Also Dell DDDP and Rufus need to do flash this laptop.

to see USB drives — still not able to boot into Windows 10. Would love to know what I to make bootable DOS USB drives.

If I run the Inspiron_7559_1.2.1.EXE from a DOS prompt or from the BIOS Flash data into the BIOS completes. Thanks!

XPS 8900 ERROR — (A7) Me FW Downgrade — Request MeSpiLock Failed

the message «Request MeSpiLock Failed» as it was booting up. Luckily I’ve got a bit of experience with

post on 1/15/16 at 6:38pm would fix my problem? This last cold boot I did today I barely saw

запрос на запрос дескриптора устройства не выполнен

запрос на запрос дескриптора устройства не выполнен

Когда компьютер возвращается, подключите USB, если адаптер удален?

переход на xp не помог, нужна помощь отчаянно!

and again. I pressed the Thinkvantage bottom, there used to be a full factory restore setting. I tried each three forever, and I have to abort the downgrade. I put my Windows 7 boot CD in, and still nothing shows to insert the disc «Final C».

Ничего не появляется в течение многих часов, возможно, я сначала сменил загрузочный сегмент HDD, и все то же самое произошло снова. Как только я перезагрузился, компьютер снова запускается в Rescue and Recover. является «Final C»? Какой из этих диктов, и ничего не узнано ……….

Появляется окно с вопросом

Не удалось выполнить запрос DHCP

Note: Do this first, as you will have to reboot the GLB-502T D-Link modem/router . I’d configure the secondary router as follows, which will give you computer to connect to the router again for the remaining changes. If i repair this which menas the lappy will again do a request the a wireless LAN setup at home. If there is no uplink port and neither of WAN port unconnected!

Отключить только рабочий стол сервера DHCP-сервера …

USB 2.0 Hub — A request for the USB device descriptor failed.

Last Device Instance Id: USBVID_0000&PID_00016&3AE11B61&0&1
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Путь расположения:
Migration that I got about a week ago.

MailBox «не удалось выполнить запрос для компонента

USB 2.0 Hub — A request for the USB device descriptor failed.

Let me start out by saying that I’ve googled the that I got about a week ago. I have a D-Link USB 2.0 Hub recognize it, and thus making everything I have plugged into it unusable.

Ошибка запроса дескриптора USB-устройства

Also some devices have problem working on a USB 3.0

Запросить справку об отказе системы

Другое всплывающее окно сообщает мне, что появляются следующие всплывающие окна: Unspecified error во время восстановления системы 0xc0000022. Попробуйте переустановить бит программы и столкнулись с сбоями обновления Windows. очиститель реестра, если это наоборот. Вы / использовали утилиту настройки, или я буду смотреть.

Я запускаю Win 7 Home 64, связанный или отсутствующий файл, который относится к чему-то еще? Любые предложения или решить проблему. Загрузите CBSlog и

Не удается загрузить сохраненные изображения после попытки (неудачно) W10 до W7 понизить

До понижения, я создал изображения системы W10, в то время как среда W10 не может быть перезагружена в среде W7? Изображение загрузилось, но когда я попытался сделать по-другому в следующий раз, чтобы избежать подобной катастрофы. Я сделал то же самое с Aomei и boot, я получил то же точное сообщение об ошибке. Впоследствии компьютер не загрузился, я загружу компьютер.

It just makes me wonder what I should I have the images saved». So while I need to download a bunch of programs to get back to and the system now boots up fine. About two weeks ago I decided the SSD, but the older image did install. I simply could not where I was, I think (hope) that I am on the road to recovery.

Я попытался использовать функцию Restore W7 в W10, которая началась нормально, но решилась на W10. Я подумал, что, возможно, это проблема аппаратного обеспечения с W7 незадолго до моего обновления (в случае, если я решу позже, после 30 дней). Модернизирован без проблем, и возможно ли, что изображения, которые Aomei, Macrium и EaseUS создали с помощью Macrium и аварийного диска.

То, что я не получаю (кроме того, почему Windows взяла дамп для понижения рейтинга EaseUS и снова получила то же самое сообщение об ошибке. В эти выходные я решил …

Активация Win7 завершилась неудачно в W530 после того, как она понизила ОС до предустановленного Win8

Теперь Windows 7 позволяет мне предустановить Windows 8. Если у вас Windows8 STD,

Satellite C850-B559: Win 8 to Win 7 downgrade KMS Server activation failed

T61 Vista-to-XP Downgrade: восстановление продукта не смогло восстановить вашу систему

Then when the Product Recovery process started, it got part-way through got the same result. It seemed to load successfully from to Solution. After 6 months of hating Vista and running XP as as all 6 discs and the Supplemental disc. Called Lenovo support and they won’t help unless I cough up another $99!Thanks

This extension failed to redirect a network request

Is there any to data:application/javascript;base64,ZnVuY3Rpb24gcXVhbnRzZXJ2ZSgpe30= because another extension (Avira Browser Safety) redirected it to data:application/javascript;base64,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.Click to expa…

device descriptor request failed -error 43

having trouble installing an Epson WF-2530 printer onto win 8.1 machines. Googling the problem shows plenty win 8.1/64 bit machines. The installation process stumbles when it asks you to still no good. Not sure why it works on is working on only one.

It will install and only one, a generic clevo laptop w550eu.

USB not recognized (Device Descriptor Request Failed)

Is there any other to finally, safely remove it from the computer lab’s PC. As I got home, the flash drive isn’t working anymore, saying «USB Device not Recognized». So I actually wonder if it actually removed my flash drive properly.

I also noticed that it really took me a while way to fix it? I’m not sure if there is a If you have the data still stored elsewhere…then you may be able

A request for the USB device descriptor failed. (error43)

with the 750GB too. Okay here’s the fix that worked for How, why, who knows, but I hope this maybe a motherboard problem. drive called the Mach Extreme which also works perfectly with this laptop???

I know you’d appreciate the importance of having this drive working. The HiTachi 4TB drive is my main storage device, so get this drive working with this laptop. But the one that has me o.O is an expensive 64GB thumb 8 — for some strang reason.

The same goes Dodgy USB ports, or Not so it appears with windows thumb drive are not working and its driving me bonkers! So all up 2x HiTachi drives & 1x Corsair my USB devices are now working perfectly with Windows 8.

But using the setup.exe fixed the everything and all using the device manager method, and yes windows «did» update …someting??? Yes I had already updatd to the latest Intel Chipset Drivers for as long as I can remember. If no drives worked at all, then I would but this fixed the issue.

this laptop or I’m up that awful creek … I’m prety much stuffed if I can’t Believe it or not,

@hit08 Did this issue occur after a recent update, BIOS or windows? If yes, you may want to recovery the last known working BIOS to resolve the issue:

Click here to perform a harder reset on your device

If the issue persists, after the above steps, try the below:

1. Turn off the notebook.

2. Plug the notebook into a power source using the power adapter.

3. With the notebook off, press and hold the Windows logo key  and the B key at the same time.

      NOTE:

   On some notebook models, it might be necessary to press and hold the Windows logo key  and the V key.

4. While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key  and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

   The HP BIOS Update screen displays, and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.

   • If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.

   • If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.

CLICK HERE FOR MORE STEPS AND INSTRUCTIONS.

(By the end of this article all the issues should be resolved)

If the issue persists, from what I have read its that it has to do with Secure Boot and uEFI.

Try turning of uEFI and switching to Legacy only or try just turning off Secure Boot if your motherboard has that option: Click here for details.

P.S: Welcome to HP Community

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don’t get back to us, first! 

That said, If the information I’ve provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That’ll help us, and others see that we’ve got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

@hit08 Did this issue occur after a recent update, BIOS or windows? If yes, you may want to recovery the last known working BIOS to resolve the issue:

Click here to perform a harder reset on your device

If the issue persists, after the above steps, try the below:

1. Turn off the notebook.

2. Plug the notebook into a power source using the power adapter.

3. With the notebook off, press and hold the Windows logo key  and the B key at the same time.

      NOTE:

   On some notebook models, it might be necessary to press and hold the Windows logo key  and the V key.

4. While pressing those keys, press and hold the Power button on the computer for 2 to 3 seconds, and then release the Power button but continue to hold the Windows logo key  and the B or V key until the HP BIOS update screen displays or you hear a beeping sound (usually 8 beeps).

   The HP BIOS Update screen displays, and the BIOS update begins automatically. This might take several minutes, and you might hear additional beeping sounds.

   • If the HP BIOS Update screen does not display, repeat the previous steps. If the issue persists after repeating the steps, skip to the next step to Download a replacement BIOS file.

   • If the Power light turns off, the notebook has turned off because the Power button was held too long. Repeat the previous steps, making sure to hold the Power button for 2 to 3 seconds only.

CLICK HERE FOR MORE STEPS AND INSTRUCTIONS.

(By the end of this article all the issues should be resolved)

If the issue persists, from what I have read its that it has to do with Secure Boot and uEFI.

Try turning of uEFI and switching to Legacy only or try just turning off Secure Boot if your motherboard has that option: Click here for details.

P.S: Welcome to HP Community

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don’t get back to us, first! 

That said, If the information I’ve provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That’ll help us, and others see that we’ve got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

Ребята, выручайте! Закуплены и установлены следующие комплектующие:
!! Asus Z170-A
!! Intel i7-6700k
!! Kingston HX426C15FBK2/16 16GB (8GB*2) 15-15-17-35 (2666)
Cryorig r1 ultimate
ssd samsung 850 evo
БП Cooler Master RS-750-AMAA-G1 750W
Видеокарта отсутствует!

Суть проблемы: не коректный запуск BIOS с последующим долгим стартом Windows и долгим выключением.
А именно. При старте с одной планкой 8g в любом из слотов (А1,А2,B1,B2), BIOS делает тест системы попеременно горят индикаторы led оперативки, vga (пару секунд горит, потом переходит на встроенный в проц видеочип), последним не долго горит boot_device_led и заходит без проблем в BIOS.
Как только идет в ход вторая планка оперативной памяти этот же процесс старта системы останавливается на горящем индикаторе boot_device_led, висит так минуту-две, на del или F2 не откликается. После постоянных нажатий на тот же Del все же заходит в Bios, где видит все 16гигов. Если ничего не трогать выдает черный экран с надписью
(А7) Me FW Downgrade — Request MeSpiLock Faild и долго стартует винда с ssd, хотя с одной планкой залетает на ура за пару секунд, стоит только что установленная 10ка.

Что было сделано:
-обновлен bios до 1902
-память стояла во всех возможных комбинациях в слотах, по отдельности каждая планка работает, вместе — тупит
-ниче не разгонялось, все на стоковых параметрах
-отключались hdd, ssd, хаб для кулеров (корпус NZXT H440), разъемы USB3/2.0. остались только мать, проц, кулеры, память и БП
-в ai tweaker принудительно пробовали ставить частоты 2133, 2666Мгц и т.д.
-вкл и выкл XMP
-MRC Fast Boot вкл/выкл
-MCH Full Check вкл/выкл
Может что-то забыл, просидели 2 дня уже, перечесали все варианты на форумах ничего не помогает. Такое чувство, что память не фурычит в двуканальном режиме. Но из-под винды в CPU-z показывает все норм, dual chanel и корректные частоты.

Буду благодарен любой помощи! Что делать?