Acpi error 5 table load failures

Hello there, New to the Hackintosh world and keep having issues with this error. Wasn't able to find any solutions online or searching on here. Just wondering if anyone has any idea what's going on. Everything works fine. I'm able to get everything working(nvidia drivers, sound, ethernet, usb...

  • #1

Hello there,

New to the Hackintosh world and keep having issues with this error. Wasn’t able to find any solutions online or searching on here. Just wondering if anyone has any idea what’s going on.

Everything works fine. I’m able to get everything working(nvidia drivers, sound, ethernet, usb ports etc) but once I reboot the computer I get the error in the title in verbose.

My build is in my build signature except there was no option for GTX 1070. So that’s what I’m using as my GFX card.

I think it might be happening once I boot without the USB, but it works initially without it but once I reboot for the 3rd time this error occurs.

Attached is a picture of what I see in Verbose and the 2nd attachment is what I selected in Multibeast.

Any help would be appreciated.

  • photo_2017-11-16_02-58-28.jpg

    photo_2017-11-16_02-58-28.jpg

    104.4 KB

    · Views: 1,455

  • photo_2017-11-16_02-58-29.jpg

    photo_2017-11-16_02-58-29.jpg

    324.7 KB

    · Views: 1,677

  • #2

If booting from the USB is fine with no problems then copy the files of the bootloader from the usb to your installation’s drive.

  • #3

Thank you, that worked for me.

Only one problem left where I have to boot with GraphicsEnabler=No each time. Just need to figure that out but I think there should be guides on that here.

  • #4

Only one problem left where I have to boot with GraphicsEnabler=No each time.

GraphicsEnabler=No/Yes is for the Chimera boot loader and is invalid in Clover.

  • #5

GraphicsEnabler=No/Yes is for the Chimera boot loader and is invalid in Clover.

That’s strange. When I try to boot without that I get stuck at the apple logo and the spinning circle.

I guess there is another problem?

  • #6

When I try to boot without that I get stuck at the apple logo and the spinning circle.

I guess there is another problem?

Boot in verbose mode to see what that problem is.
(probably «Still waiting for root device»)

  • #7

Boot in verbose mode to see what that problem is.
(probably «Still waiting for root device»)

Thanks,

I’ll try that when I get home from work.

  • #8

It’s strange. After installing windows 10 dual boot. It started working without graphicsenabler lol. So I’ll say this is solved.

  • #9

1600469766908.jpeg

please help to solve for attached error.

  • #1

Hi,
I am trying to install macOS High Sierra on my Dell Inspirion 5566 (already running the Sierra) at boot time the error «acpi error
5 table load failure» was searched, but nothing I found helped solve it.
Unibeast 8.1.0 Clover 4297
Thanks any help :)

  • IMG_0080.jpeg

    IMG_0080.jpeg

    1.8 MB

    · Views: 416

  • #3

Thank feartech (Y)

I’m still having the boot error I tried updating for the latest 4318 Clover but it did not work.
I’m attaching the two EFI folders 12.6 and 13.1 that I’m using if anyone can help …
tried upgrading to EFI 12.6 for the latest Clover and used to boot from 13.1 but it did not work too :/

  • EFI Boot Error — High Sierra 10.13.1.zip

    3.2 MB

    · Views: 81

  • EFI OK Dell 5566 — Sierra 10.12.6.zip

    38.2 MB

    · Views: 115

  • #4

Thank feartech (Y)

I’m still having the boot error I tried updating for the latest 4318 Clover but it did not work.
I’m attaching the two EFI folders 12.6 and 13.1 that I’m using if anyone can help …
tried upgrading to EFI 12.6 for the latest Clover and used to boot from 13.1 but it did not work too :/

You did not follow the guide.
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Don’t forget to fill out your profile with laptop hardware details as requested in the FAQ and guide.

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

3

Сообщения:

14

Участник с: 26 июня 2017

Доброе время суток, господа!
Как говорится: «поможите кто чем может».
После нескольких лет на Debian решил перебраться на Arch linux, но возникли некоторые трудности:
ТТХ: MSI GE70 2OE ms-1757, HDD 1T GPT UEFI, Nvidia GF750 2G (WIFI, bluetooth — realtec, Ethernet — Ateros).
Установил базовую систему (512mb efi, 8G swap, 100G ext4 /, 200G ext4 /home, 1G ext2 /boot) и вроде бы даже, после перезагрузки, завелась и работает, но…
на начальном загрузочном экране появляются надписи об ошибках:

[ 0.366426] ACPI Error: No handler for Region [EC___] (ffff9b76470bf678) [EmbeddedContro1] (20160831/evreg ion-166)
[ 0.366431] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831 L/exfldio-299)
[ 0.366435] ACPI Error: Method parse/execution failed [_SB.PCIO.LPCB.EC._REG I (Node ffff3b76470c0bl8), AE_NOT_EXIST (20160831/psparse-543)
ACPI Error: [_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NJT_FOUND (2016083l/psargS-359)
[ 0.798598] ACPI Error: Method parse/execution failed [_SB.PCIO.PEGO.PEGP.DD 02._BCL] (Node ffff9b76470flafO), AE_N0T_FOUND (20160831/psparse-543)

Объясните пожалуйста, что это и если возможно, как это можно вылечить.
Заранее спасибо.

vasek

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

47

Сообщения:

11417

Участник с: 17 февраля 2013

hathory
Объясните пожалуйста, что это и если возможно, как это можно вылечить.

Эти сообщения обусловлены таблицей DSDT. Если все работает нормально, забей.

Ошибки не исчезают с опытом — они просто умнеют

indeviral

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

39

Сообщения:

3170

Участник с: 10 августа 2013

попробуйте отключить, дискретную видеокарту в биос.

Ошибки в тексте-неповторимый стиль автора©

vasek

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

47

Сообщения:

11417

Участник с: 17 февраля 2013

Там где указаны методы _SB.PCIO….. , это однозначно ошибки/варнинги таблицы DSDT, а вот где указано EmbeddedControl возможно связаны как то еще и с ядром, нужно смотреть и гуглить. В начале года похожие сообщения обсуждались вроде бы на BBS, но точно не помню.

Ошибки не исчезают с опытом — они просто умнеют

hathory

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

3

Сообщения:

14

Участник с: 26 июня 2017

Спасибо, видюху сегодня попробую отключить. Если меня память не подводит, то таблицы DSDT это весь перечень оборудования передаваемый BIOS в ОС. vasek, спасибо, натолкнули на мысль — EmbeddedControl — подозреваю это контроллер RAID массива, на ноуте есть две шины для организации RAIDа на ssd интерфейса М2. Да может быть именно с ними проблема и возникает. А вот с «таблицы DSDT» совсем непонятно, мне технических знаний не хватает, биолог я по образованию.

vasek

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

47

Сообщения:

11417

Участник с: 17 февраля 2013

hathory
А вот с «таблицы DSDT» совсем непонятно, мне технических знаний не хватает, биолог я по образованию.

Повторюсь, если все работает, то и забей на эти таблицы. Как то уже описывал, как можно проверить и узнать все ошибки и варнинги таблицы DSDT и, главное, они практически есть у всех.
Насчет EmbeddedController ничего конкретного сказать не могу. Если причина в выделении Region, то на это то же не стоит обращать внимания.
PS … а насчет EmbeddedController даже интересно, в том смысле, что можно ли им поуправлять? По идее вроде бы нет, не понятно, что это за контроллер. Если интересно, посмотри статью в блогах «Применение EmbeddedController для управления ….»

Ошибки не исчезают с опытом — они просто умнеют

vasek

#
5 лет, 7 месяцев назад

Темы:

47

Сообщения:

11417

Участник с: 17 февраля 2013

У меня как то выскочила ошибка MCE, пришлось установить mcelog для контроля и в загрузочных логах стали выскакивать сообщения

mcelog[347]: failed to prefill DIMM database from DMI data
mcelog[347]: Kernel does not support page offline interface

Но на работу это не влияет и вообщем то сообщения, как пишут, безобидные.

Ошибки не исчезают с опытом — они просто умнеют

vasek

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

47

Сообщения:

11417

Участник с: 17 февраля 2013

Посмотрел внимательнее твои сообщения.
Первые три относятся к Embeded Controller, подключенному к LPC bus (Low Pin Count bus) — что это за контроллер, нужно разбираться конкретно.

hathory
[ 0.366426] ACPI Error: No handler for Region [EC___] (ffff9b76470bf678) [EmbeddedContro1] (20160831/evreg ion-166)
[ 0.366431] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831 L/exfldio-299)
[ 0.366435] ACPI Error: Method parse/execution failed [_SB.PCIO.LPCB.EC._REG I (Node ffff3b76470c0bl8), AE_NOT_EXIST (20160831/psparse-543)

Следующие два относятся к видеокартам (интегрированной и дискретной)

hathory
ACPI Error: [_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NJT_FOUND (2016083l/psargS-359)
ACPI Error: Method parse/execution failed [_SB.PCIO.PEGO.PEGP.DD 02._BCL] (Node ffff9b76470flafO), AE_N0T_FOUND (20160831/psparse-543)

Что конкретно это означает — нужно смотреть саму таблицу, но смысла в этом не вижу, если все работает.

PS … забыл подметить — _BCL — Brightness Control Levels — связано с подсветкой

Ошибки не исчезают с опытом — они просто умнеют

hathory

#
5 лет, 7 месяцев назад

(отредактировано

5 лет, 7 месяцев назад)

Темы:

3

Сообщения:

14

Участник с: 26 июня 2017

vasek, спасибо большое, да с видеокартами проблема решилась, поставил Bumblebee и ошибки пропали (правда Bluetooth отвалился, но это решабельно, и подозреваю что из-за tlp). Из LPC bus — на ноуте только встроенная камера — bison, подозреваю дело именно в ней. BCL — Brightness Control Levels — нет такой, у старших моделей моей линейки ноутов есть, у моего нет, но видимо BIOS имеет упоминание о подсветке =)
vasek, еще раз спасибо большое, прям жить стало приятно.

Содержание

  1. Acpi error hackintosh catalina
  2. Acpi error hackintosh catalina
  3. MacOS Catalina ACPI error 9 table load failures
  4. MacOS Catalina ACPI error 9 table load failures
  5. Re: MacOS Catalina ACPI error 9 table load failures
  6. Re: MacOS Catalina ACPI error 9 table load failures
  7. «OC : failed to drop ACPI 54445353» error on boot #208
  8. Comments

Acpi error hackintosh catalina

    UEFI bios:

  • Скидываем все настройки в default.
  • AHCI — enable;
  • Vt-d: Disable (+ в Clover дропнуть DMAR таблицу)
  • Vt-x: Enable (только для 10.13 и если используете виртуальные машины)
  • Intel Virtualization Technology — Enable
  • Serial-port: Disable (Можно оставить включеным, но это требует внесения изменений в загрузчик (Opencore)
  • XHCI Hand-off: Enabled (рекомендуеться)
  • XHCI Hand-off: Disable (только если что то не работает в режиме Enable )
  • IOAPIC 24-119 Entries: Enabled (подмечено что у многих с этим пунктом паникует, поэтому тестируйте)
  • CSM: Disable (если ваша видеокарта не умеет работать в режиме UEFI — не выключайте)
  • Fasboot: Disable
  • Secure boot: Disable or Other OS
  • ResizeGPUBars: Disable (Можно оставить включеным, но это требует внесения изменений в загрузчик (Opencore)
  • Above 4g decoding: Enable

Legacy bios:

  • AHCI: enable;
  • HPET: enable;
  • Vt-d: disable;
  • ACPI Suspend Type — S3 (Only);
  • No Execute memory — enable;
  • USB Legacy — enable;
  • Отключаем всю периферию (вебки, смарты, блютуз-свистки, кард-ридеры и т.д.)
  • Для установки потребуется флешка не менее 16Гб.

    За данный споcоб установки благодарим cvad и Skvo
    Данная инструкция написана по материалам с applelife.ru

    • OPT — показать меню загрузки OpenCore. Также поддерживается клавиша Esc.
    • CMD+OPT+P+R — очистить NVRAM. Требуется Misc-Security-AllowNvramReset=YES.
    • X — загрузить первую найденную операционную систему Apple, если по умолчанию выбрана не операционная система Apple.
    • CMD+R — загрузка в режиме восстановления (Recovery).
    • CMD+C+MINUS — отключить проверку совместимости на board-id.
    • CMD+K — загрузка актуального ядра, аналогично kcsuffix=release.
    • CMD+S+MINUS — отключить KASLR slide, требуется выключенный SIP.
    • CMD+S — однопользовательский режим, налогично флагу -s в аргументах загрузки.
    • CMD+V — логирование загрузки, аналогично флагу -v в аргументах загрузки.
    • Shift — безопасный режим, налогично флагу -x в аргументах загрузки.
    В зависимости от железа, при загрузке может не все работать или работать не надежно. На PS/2 при загрузке доступно только Esc.

    Комбинации клавиш в меню, после входа в него по OPT(Esc) или при ShowPicker=YES
    За счет того что в меню действует параметр Misc-Boot-PollAppleHotKeys=YES успехов тут обычно больше. Не включайте, если с выключенным работает.

    • Esc — отмена тайм-аута.
    • CMD+OPT+P+R — очистить NVRAM. Требуется Misc-Security-AllowNvramReset=YES.
    • CMD+C+MINUS — отключить проверку совместимости на board-id.
    • CMD+K — загрузка актуального ядра, аналогично kcsuffix=release.
    • CMD+S+MINUS — отключить KASLR slide, требуется выключенный SIP.
    • CMD+S — однопользовательский режим, налогично флагу -s в аргументах загрузки.
    • CMD+V — логирование загрузки, аналогично флагу -v в аргументах загрузки.
    • Shift — безопасный режим, налогично флагу -x в аргументах загрузки.
    • Index — загрузка раздела соответствующего индексу.
    • Enter — загрузка дефолтного раздела или выбранного стрелками.
    • CTRL+Enter и CTRL+Index — выбрать выделенный раздел для загрузки по умолчанию. Требуется Misc-Security-AllowSetDefault=YES.

    CMD=Windows Key, OPT=Alt на windows ориентированной клавиатуре.

    В зависимости от вашего BIOS и типа клавиатуры доступные комбинации могут варьироваться.
    Больше деталей в актуальной документации.

    Источник

    Acpi error hackintosh catalina

      UEFI bios:

    • Скидываем все настройки в default.
    • AHCI — enable;
    • Vt-d: Disable (+ в Clover дропнуть DMAR таблицу)
    • Vt-x: Enable (только для 10.13 и если используете виртуальные машины)
    • Intel Virtualization Technology — Enable
    • Serial-port: Disable (Можно оставить включеным, но это требует внесения изменений в загрузчик (Opencore)
    • XHCI Hand-off: Enabled (рекомендуеться)
    • XHCI Hand-off: Disable (только если что то не работает в режиме Enable )
    • IOAPIC 24-119 Entries: Enabled (подмечено что у многих с этим пунктом паникует, поэтому тестируйте)
    • CSM: Disable (если ваша видеокарта не умеет работать в режиме UEFI — не выключайте)
    • Fasboot: Disable
    • Secure boot: Disable or Other OS
    • ResizeGPUBars: Disable (Можно оставить включеным, но это требует внесения изменений в загрузчик (Opencore)
    • Above 4g decoding: Enable

    Legacy bios:

  • AHCI: enable;
  • HPET: enable;
  • Vt-d: disable;
  • ACPI Suspend Type — S3 (Only);
  • No Execute memory — enable;
  • USB Legacy — enable;
  • Отключаем всю периферию (вебки, смарты, блютуз-свистки, кард-ридеры и т.д.)
  • Для установки потребуется флешка не менее 16Гб.

    За данный споcоб установки благодарим cvad и Skvo
    Данная инструкция написана по материалам с applelife.ru

    • OPT — показать меню загрузки OpenCore. Также поддерживается клавиша Esc.
    • CMD+OPT+P+R — очистить NVRAM. Требуется Misc-Security-AllowNvramReset=YES.
    • X — загрузить первую найденную операционную систему Apple, если по умолчанию выбрана не операционная система Apple.
    • CMD+R — загрузка в режиме восстановления (Recovery).
    • CMD+C+MINUS — отключить проверку совместимости на board-id.
    • CMD+K — загрузка актуального ядра, аналогично kcsuffix=release.
    • CMD+S+MINUS — отключить KASLR slide, требуется выключенный SIP.
    • CMD+S — однопользовательский режим, налогично флагу -s в аргументах загрузки.
    • CMD+V — логирование загрузки, аналогично флагу -v в аргументах загрузки.
    • Shift — безопасный режим, налогично флагу -x в аргументах загрузки.
    В зависимости от железа, при загрузке может не все работать или работать не надежно. На PS/2 при загрузке доступно только Esc.

    Комбинации клавиш в меню, после входа в него по OPT(Esc) или при ShowPicker=YES
    За счет того что в меню действует параметр Misc-Boot-PollAppleHotKeys=YES успехов тут обычно больше. Не включайте, если с выключенным работает.

    • Esc — отмена тайм-аута.
    • CMD+OPT+P+R — очистить NVRAM. Требуется Misc-Security-AllowNvramReset=YES.
    • CMD+C+MINUS — отключить проверку совместимости на board-id.
    • CMD+K — загрузка актуального ядра, аналогично kcsuffix=release.
    • CMD+S+MINUS — отключить KASLR slide, требуется выключенный SIP.
    • CMD+S — однопользовательский режим, налогично флагу -s в аргументах загрузки.
    • CMD+V — логирование загрузки, аналогично флагу -v в аргументах загрузки.
    • Shift — безопасный режим, налогично флагу -x в аргументах загрузки.
    • Index — загрузка раздела соответствующего индексу.
    • Enter — загрузка дефолтного раздела или выбранного стрелками.
    • CTRL+Enter и CTRL+Index — выбрать выделенный раздел для загрузки по умолчанию. Требуется Misc-Security-AllowSetDefault=YES.

    CMD=Windows Key, OPT=Alt на windows ориентированной клавиатуре.

    В зависимости от вашего BIOS и типа клавиатуры доступные комбинации могут варьироваться.
    Больше деталей в актуальной документации.

    Источник

    MacOS Catalina ACPI error 9 table load failures

    MacOS Catalina ACPI error 9 table load failures

    par AlzoxX76 Lun 18 Mai 2020 — 20:59

    J’ai ensuite booté en UEFI en laissant le config.plist de base, l’erreur «ACPI error 9 table load failures» me bloquait.
    J’ai ensuite essayé avec inject NVidia, mais sans succès même erreur.

    L’erreur en question :

    J’avais déjà essayé et réussi à installer MacOS High Sierra il y a 2 ans mais avec une carte graphique AMD du coup je me demandais si j’ai raté un truc ou autre, déjà je pense que mon config.plist est cassé x)

    Bref je vous laisse mon dossier EFI qui pourrait vous être utile.

    Ma config :
    CM : Asus strix z370F
    CPU : Intel core i7 8700k
    GPU : RTX 2060

    Re: MacOS Catalina ACPI error 9 table load failures

    par AlzoxX76 Lun 18 Mai 2020 — 23:06

    Après avoir édité mon config.plist par : https://github.com/corpnewt/Hackintosh-Guide/blob/master/Configs/CoffeeLake/config.plist

    J’arrive à passer l’étape de chargement des tables mais j’arrive à une erreur où mon écran «freeze» bref il y a des pîxels dans tout les sens avec un logo sens interdit gris.
    On peut difficilement distinguer «Still waiting for root device», c’est sûrement un bug de USB de ce que j’ai lu, j’ai essayé tout mes ports USB + Fix USB dans le config.plist, rien n’a fonctionné

    Re: MacOS Catalina ACPI error 9 table load failures

    par emax31 Lun 18 Mai 2020 — 23:10

    AlzoxX76 a écrit: J’avais déjà essayé et réussi à installer MacOS High Sierra il y a 2 ans mais avec une carte graphique AMD du coup je me demandais si j’ai raté un truc ou autre, déjà je pense que mon config.plist est cassé x)

    Ma config :
    CM : Asus strix z370F
    CPU : Intel core i7 8700k
    GPU : RTX 2060

    Important : Une fois résolu, l’auteur du sujet peut ajouter [Résolu] au début du titre en cliquant sur Editer de son premier message, et ajouter un bref récapitulatif de la solution à la fin de celui-ci ou mieux faire un tuto. Merci.

    Источник

    «OC : failed to drop ACPI 54445353» error on boot #208

    First of all thanks for your great work ! Thanks to your guide the hackintosh I’ve been very happy with a fully functioning hackintosh for more than a year.

    My hack has the same specs as yours except that I use an AMD Radeon RX580 GPU instead of the W5500 eGPU. I’m currently using OC 0.6.2 from your 3.xx release, with the iMac20.2 config, and it’s been working like a charm without having to modify much.

    I’m now trying to update to a newer OC version because I would be more confortable having a fresh one before upgrading to Monterey. And here is my issue : it’s impossible to boot, I get a blackscreen before picker. With debug on I get the following error :

    «OC : failed to drop ACPI 54445353 3464736D635F6878 1387 (1) — Not Found»

    I tried several different releases (master branch, v12, V6, V5, V4) and the different config.plist files proposed in the release, and the issue still persists.

    Any clue about what to do ?

    The text was updated successfully, but these errors were encountered:

    Disable the ACPI/Delete and use a kext-based USB port config.

    Somehow your ACPI doesn’t have this table/ at this position and so the delete of the original USB port config can’t be executed. I guess because you are on a different bios version than the one I did this config on.

    This is the one you have to disable.

    Indeed I have bios version F20 because I couldn’t find version F20b on the Gigabyte website, maybe it’s the source of the problem. Thanks for the instructions I will try asap !

    Indeed I have bios version F20 because I couldn’t find version F20b on the Gigabyte website, maybe it’s the source of the problem. Thanks for the instructions I will try asap !

    @bademjan There is a little confusion with BIOS Updates for this board. Gigabyte, for some obscure reason uploaded an F21 BIOS update on 24/11/2021. BUT the obscure thing is that the F21 is actually NEWER than the BIOS F21b which got uploaded on 05/10/2021. So . For some reason the F21 is NEWER than F21b . LoL ! Anyway ! After Updating to the NEWEST BIOS F21, The Kextless usb port mapping works amazingly well ! A huge thanks to @SchmockLord ! BUT I would like to point out that in order to be able to BOOT I HAD TO replace the SSDT-Disable-CNVW.aml from a previous OC Release (e.g. 0.7.5) Because the CURRENT ONE uploaded in OC 0.7.8 Does NOT Boot. ( It produces ACPI Error) ! I hope this clears up the confusion !

    @gtrooper Thanks for pointing that out. Funny thing is, that the previous version of the SSDT-Disable-CNVW.aml showed me ACPI errors when I opened it in MacIASL. Can you open both versions and screenshot me what the compile status?

    And can you try to find out the ACPI-path to the cnvw device from the DSDT.aml?

    @gtrooper Thanks for pointing that out. Funny thing is, that the previous version of the SSDT-Disable-CNVW.aml showed me ACPI errors when I opened it in MacIASL. Can you open both versions and screenshot me what the compile status?

    And can you try to find out the ACPI-path to the cnvw device from the DSDT.aml?

    @SchmockLord You were right. Something really weird is happening with the SSDT-Disable-CNVW.aml ! The one you uploaded in 0.7.8 shows NO ERRORS in MaciASL but it does not boot.
    (It produces the following error upon boot)

    Here is the Screenshot from SSDT-Disable-CNVW.aml from Opencore Release 0.7.5

    Here is the Screenshot from SSDT-Disable-CNVW.aml from Opencore Release 0.7.8

    I just dumped the original DSDT.aml using OpenCore Debug 0.7.8 (And Newest BIOS F21), so I suppose that you can extract the information you need from this DSDT. If there is anything else I can do, I will be happy to help 🙂

    Also, If I understood correctly, this is what you asked 🙂

    Indeed I have bios version F20 because I couldn’t find version F20b on the Gigabyte website, maybe it’s the source of the problem. Thanks for the instructions I will try asap !

    @bademjan There is a little confusion with BIOS Updates for this board. Gigabyte, for some obscure reason uploaded an F21 BIOS update on 24/11/2021. BUT the obscure thing is that the F21 is actually NEWER than the BIOS F21b which got uploaded on 05/10/2021. So . For some reason the F21 is NEWER than F21b . LoL

    This is just gigabyte naming. F21b is the beta bios. F21 is final, which is why it replaces F21b.
    For that matter, all bios versions ending in a letter are pre-release versions. To make matters worse, gigabyte sometimes leave it at pre-release version forever (or a long time) without clearly qualifying it as such

    @SchmockLord Did you have any time to check what actually happens with the SSDT-Disable-CNVW.aml ? Did you check my newly created DSDT ? Thank you for your time !

    @gtrooper Can you try the EFI from my newest commit (haven’t released it yet)? I replaced the SSDT-Disable-CNVW.aml with is a very old version and used by many. Also gives no ACPI error.

    @SchmockLord Very Nice Work SchmockLord ! I just tested your 0.7.9 EFI with the latest changes and now it runs perfectly ! I use your SSDT Based USB Mapping ! The boot with the USB Kext based config is noticeably slower. so for those that do not have issues with your SSDT Based USB Mapping it is an amazing solution ! Just a question: Did I provide you with what you asked in the previous post ? Was my newly generated DSDT from BIOS F21 helpful at all ? Did you manage to find the ACPI path ?

    Also: I noticed that in your VERY EARLY Builds (Release 3 or older) you had set CORRECTLY the Device ID of the iGPU to «923E0000» which is the proper value for UHD 630 for the Desktop iGPU. The Device-ID you use in your currents build is WRONGLY set to «C59B0000», which is the Mobile Version of the UHD 630 iGPU ! While this seems to NOT affect anything critical, it actually does. I discovered that it causes Weird Errors AND black screens when using SIDECAR ! With the correct Device ID, Sidecar is unbelievably smooth and works amazingly well ! Could you please make this change in your next Release ? Thank you so much for your valuable help !

    Also: As mentioned in the OPEN ISSUE #195 a few hours ago, OpenCore 0.7.9 seems to have a new option SetApfsTrimTimeout. If you set this value to 0 it disables Trim upon booting (But it seems that it enables it again as soon as it completes booting) and this seems that it enables crazy fast booting REGARDLESS of the SSD Vendor. I tested booting speed with a Seagate PCIe 4.0 NVME AND with an ADATA XPG PCIe 4.0 NVME and in BOTH Drives it reduced booting from 20 seconds to 9 seconds ! Also this works in Catalina and NOT ONLY Monterey+ ! Do you see any disadvantage setting the default value to 0 instead of -1 ? Thank you so much AGAIN for EVERYTHING !

    @gtrooper Well, then let’s fix it :).

    Yes, the DSDT.aml helped, thanks. I just went back to an old SSDT-Diable-CNVW.aml where the PCI-Path was correct already.

    Thanks for the hint with the iGPU device-ID. Just fixed that.

    And I changed the SetApfsTrimTimeout to 0 in all the configs.

    It worked on my Z590i with a 2TB Intel 660p, blazing fast compared to before. Don’t see any disadvantage. Seems to solve the issue with Trim we had before.

    Источник


    1

    0

    Без подробного описания не обойтись.Скачал значит я Kubuntu 18.04
    и с помощью Rufus’а сделал загрузочную флешку. При загрузке, в самом начале (при запуске системы), вылезают ошибки, но загрузка продолжается и я даже увидел рабочий стол, стал проходить поэтапно меню установки и в конце мне написало, что какой-то файл невозможно открыть. Дальше отказывается система грузиться.

    Ошибки такие:
    [0.000000] [Firmware bug] : TSC_DEADLINE disabled due to ERRATA: please update microcode to version: 0xb2 (or later) ||
    [0.017928] ACPI Error: [_SB_.PCIO.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210) ||
    [0.017931] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252) ||
    [0.017954] ACPI Exception: Ae_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170531/tbxfload-228) ||
    [0.022151] ACPI Error: 1 table load failures, 8 succesful (20170531/tbxfload-246) ||
    Дальше идут всякого рода «unable to onen /dev/…»

    Скачал Ubuntu 18.04. Тоже-самое! Пробовал даже Kubuntu 16.04. Всё тоже.

    *При создании загрузочной флешки использовал и MBR и GPT схемы…*

    Hi,
    I get these errors when I boot up archlinux. Can someone help me figure out how to resolve them? I fear these issues might be hampering my laptop’s battery life.

    Thanks

    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.TUPC], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.HS01._UPC], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Failure creating named object [_SB.PCI0.XHC.RHUB.HS01._PLD], AE_ALREADY_EXISTS (20210930/dswload2-326)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20210930/psobject-220)
    Feb 03 12:55:39 archlinux kernel: ACPI BIOS Error (bug): Could not resolve symbol [_SB.PCI0.RP05.PXSX.WIST], AE_NOT_FOUND (20210930/psargs-330)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: Aborting method _SB.PCI0.XHC.RHUB.CNDP due to previous error (AE_NOT_FOUND) (20210930/psparse-529)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: Aborting method due to previous error (AE_NOT_FOUND) (20210930/psparse-529)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: Invalid zero thread count in method (20210930/dsmethod-774)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: Invalid OwnerId: 0x000 (20210930/utownerid-156)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: AE_NOT_FOUND, (SSDT:ACRPRDCT) while loading table (20210930/tbxfload-189)
    Feb 03 12:55:39 archlinux kernel: ACPI Error: 1 table load failures, 12 successful (20210930/tbxfload-208)

    Last edited by abrattic (2022-02-03 09:35:34)

    I am using Macmini 8,1 … SMBios however appears to make no difference whatsoever to Mojave with the patch above it works flawlessly without faking anything or injecting anything with clover.

    However it still hangs at the same point regardless in Catalina.

    OpenCore has exactly the same settings and hangs as well at the same point so Has to be a setting somewhere that I’m not seeing.

    8550U is a Kabylake-R rather than just Kabylake. Which is apparently closer to Coffeelake.

    I have tried faking with various ID’s the settings in my Config are the only one that give me Acceleration AND HDMI Audio.

    If I use the patch below along with clover ig-platform-id 0x59160009 and Inject intel for Mojave it will work 100% as well (with correct PCI device displaying) … but this will also hang Catalina boot at the same point. 

    I get the feeling that this is more to do with a permission, setting or device failing to load in Catalina rather than an issue with the patch.

    I have re-installed Catalina twice to be sure its 100% first though (completely Vanilla btw). First Attempt was an upgrade from Mojave (which also worked fine except the stupid graphics!)   

    Also, just to out hardware, I have tested Catalina installs on both of my identical machines with exactly the same result.  

    <key>PciRoot(0x0)/Pci(0x2,0x0)</key>
    		<dict>
    			<key>AAPL,ig-platform-id</key>
    			<data>
    			BAClPg==
    			</data>
    			<key>device-id</key>
    			<data>
    			pT4AAA==
    			</data>
    			<key>disable-external-gpu</key>
    			<data>
    			AQAAAA==
    			</data>
    			<key>enable-hdmi20</key>
    			<data>
    			AQAAAA==
    			</data>
    			<key>framebuffer-fbmem</key>
    			<data>
    			AACQAA==
    			</data>
    			<key>framebuffer-patch-enable</key>
    			<integer>1</integer>
    			<key>framebuffer-stolenmem</key>
    			<data>
    			AAAwAQ==
    			</data>
    		</dict>


    vAtR3k.png


    Edited December 13, 2019 by stevef

    Понравилась статья? Поделить с друзьями:

    Читайте также:

  • Acpi bios error при установке windows 10
  • Acpi bios error при установке linux
  • Acpi bios error windows 10 при загрузке ноутбука
  • Acpi bios error supermicro
  • Acpi bios error failure creating named object ubuntu

  • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии