Although you have Debian, this is also on my Ubuntu 18.04/Mint 19.3.
This is just error reporting and not a bug, according to Uncle Archie:
https://bugs.archlinux.org/task/52777
Funnily(not) I also run an aging European(ECRM?), Lenovo B590 with the same error also seen on other Lenovos’, given the age of the BIOS(circa 2013/5), the timing (just after keyboard definitions are loaded)
More info is found here, OUCH!.
My auth.log shows (Take note of the last 2 entries):
Jun 17 10:26:38 xxxx systemd-logind[788]: Watching system buttons on /dev/input/event2 (Power Button)
Jun 17 10:26:38 xxxx systemd-logind[788]: Watching system buttons on /dev/input/event0 (Lid Switch)
Jun 17 10:26:38 xxxx systemd-logind[788]: Watching system buttons on /dev/input/event1 (Sleep Button)
Jun 17 10:26:38 xxxx systemd-logind[788]: Watching system buttons on /dev/input/event3 (AT Translated Set 2 keyboard)
Jun 17 10:26:38 xxxx systemd-logind[788]: Watching system buttons on /dev/input/event6 (ThinkPad Extra Buttons)
And syslog fails before they are all complete:
Jun 17 10:26:38 xxxx kernel: [ 1.661872] ACPI: AC Adapter [ADP1] (on-line)
Jun 17 10:26:38 xxxx kernel: [ 1.661949] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Jun 17 10:26:38 xxxx kernel: [ 1.661964] ACPI: Lid Switch [LID0]
Jun 17 10:26:38 xxxx kernel: [ 1.662001] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Jun 17 10:26:38 xxxxx kernel: [ 1.662009] ACPI: Sleep Button [SLPB]
Jun 17 10:26:38 xxxx kernel: [ 1.662048] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jun 17 10:26:38 xxxx kernel: [ 1.662057] ACPI: Power Button [PWRF]
Jun 17 10:26:38 xxxx systemd[1]: networking.service: Failed with result 'exit-code'.
Jun 17 10:26:38 xxxx kernel: [ 1.662725] ACPI Error: No handler for Region [ECRM] ((____ptrval____)) [EmbeddedControl] (20190703/evregion-132)
Jun 17 10:26:38 xxxx systemd[1]: Failed to start Raise network interfaces.
Jun 17 10:26:38 xxxx kernel: [ 1.662731] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20190703/exfldio-265)
Jun 17 10:26:38 xxxx kernel: [ 1.662739] No Local Variables are initialized for Method [MDEC]
Jun 17 10:26:38 xxxx kernel: [ 1.662740] Initialized Arguments for Method [MDEC]: (3 arguments defined for method invocation)
Jun 17 10:26:38 xxxx kernel: [ 1.662741] Arg0: (____ptrval____) <Obj> Integer 0000000000000090
Jun 17 10:26:38 xxxx kernel: [ 1.662745] Arg1: (____ptrval____) <Obj> Integer 00000000000000FE
Jun 17 10:26:38 xxxx kernel: [ 1.662747] Arg2: (____ptrval____) <Obj> Integer 0000000000000000
Jun 17 10:26:38 xxxx kernel: [ 1.662751] ACPI Error: Aborting method _TZ.MDEC due to previous error (AE_NOT_EXIST) (20190703/psparse-531)
Jun 17 10:26:38 xxxx kernel: [ 1.662759] ACPI Error: Aborting method _TZ.TZS0._SCP due to previous error (AE_NOT_EXIST) (20190703/psparse-531)
Jun 17 10:26:38 xxxx kernel: [ 1.662912] thermal LNXTHERM:00: registered as thermal_zone0
Jun 17 10:26:38 xxxx kernel: [ 1.662913] ACPI: Thermal Zone [TZS0] (39 C)
EDIT
Could you post the previous 6 lines of auth.log and sys.log (use date/timestamp) to see if there are any similarities, or any other thoughts on this?
Much appreciated.
Hey I found the culprit, well it worked for me!: Add ‘acpi=off`.
After testing on my ancient Lenovo B590, several times, by editing using ‘e’ on my grub menu to:
BOOT_IMAGE=/vmlinuz-5.3.0-59-lowlatency root=UUID=51e6fcad-3f35-d601-5040-fcad3f35d601 ro acpi=off quiet splash
Got lucky , only 3 boots to find it , running 3 days no problems so far, enjoy!
Hopefully doesn’t damage anything else, the spec is a few pages down here.
-
- #1
I just installed v7.90.010 ALPHA onto a newly bought SSD on my Shuttle XS35GTV2.
Since the first boot it shows the attached error messages. With the old SSD and version 7.90.009 it did not happen.Is there anything I can or need to do about this? I searched the Interwebs, but did not find something useful.
Merry Christmas!
(For search purposes:
SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al
[ 0.7741161 ACPI Error: No handler for Region [ECRM] (ffff88007d0263a8) [EmbeddedControl] (20160831/evregion-166)[ 0.774320] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[ 0.774513] ACPI Error: Method parse/execution failed [_SB.PCIO.SBRG.ECO._REG] (Mode ffff88007d028b40), AE_NOT_EXIST (20160831/psparse-543)
) -
- #2
I have exactly the same error (also on every boot) and also on an Shuttle XS35GTv2. Is there any fix?
It is happening since I installed version 8.0 today, did not happen with 7.0 before.
|
# (отредактировано 5 лет, 7 месяцев назад) |
|
|
Темы: 3 Сообщения: 14 Участник с: 26 июня 2017 |
Доброе время суток, господа! Как говорится: «поможите кто чем может». После нескольких лет на Debian решил перебраться на Arch linux, но возникли некоторые трудности: ТТХ: MSI GE70 2OE ms-1757, HDD 1T GPT UEFI, Nvidia GF750 2G (WIFI, bluetooth — realtec, Ethernet — Ateros). Установил базовую систему (512mb efi, 8G swap, 100G ext4 /, 200G ext4 /home, 1G ext2 /boot) и вроде бы даже, после перезагрузки, завелась и работает, но… на начальном загрузочном экране появляются надписи об ошибках: Объясните пожалуйста, что это и если возможно, как это можно вылечить. |
|
vasek |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 47 Сообщения: 11417 Участник с: 17 февраля 2013 |
Эти сообщения обусловлены таблицей DSDT. Если все работает нормально, забей. Ошибки не исчезают с опытом — они просто умнеют |
|
indeviral |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 39 Сообщения: 3170 Участник с: 10 августа 2013 |
попробуйте отключить, дискретную видеокарту в биос.
Ошибки в тексте-неповторимый стиль автора© |
|
vasek |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 47 Сообщения: 11417 Участник с: 17 февраля 2013 |
Там где указаны методы _SB.PCIO….. , это однозначно ошибки/варнинги таблицы DSDT, а вот где указано EmbeddedControl возможно связаны как то еще и с ядром, нужно смотреть и гуглить. В начале года похожие сообщения обсуждались вроде бы на BBS, но точно не помню.
Ошибки не исчезают с опытом — они просто умнеют |
|
hathory |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 3 Сообщения: 14 Участник с: 26 июня 2017 |
Спасибо, видюху сегодня попробую отключить. Если меня память не подводит, то таблицы DSDT это весь перечень оборудования передаваемый BIOS в ОС. vasek, спасибо, натолкнули на мысль — EmbeddedControl — подозреваю это контроллер RAID массива, на ноуте есть две шины для организации RAIDа на ssd интерфейса М2. Да может быть именно с ними проблема и возникает. А вот с «таблицы DSDT» совсем непонятно, мне технических знаний не хватает, биолог я по образованию. |
|
vasek |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 47 Сообщения: 11417 Участник с: 17 февраля 2013 |
Повторюсь, если все работает, то и забей на эти таблицы. Как то уже описывал, как можно проверить и узнать все ошибки и варнинги таблицы DSDT и, главное, они практически есть у всех. Ошибки не исчезают с опытом — они просто умнеют |
|
vasek |
# |
|
Темы: 47 Сообщения: 11417 Участник с: 17 февраля 2013 |
У меня как то выскочила ошибка MCE, пришлось установить mcelog для контроля и в загрузочных логах стали выскакивать сообщения
Но на работу это не влияет и вообщем то сообщения, как пишут, безобидные. Ошибки не исчезают с опытом — они просто умнеют |
|
vasek |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 47 Сообщения: 11417 Участник с: 17 февраля 2013 |
Посмотрел внимательнее твои сообщения. Первые три относятся к Embeded Controller, подключенному к LPC bus (Low Pin Count bus) — что это за контроллер, нужно разбираться конкретно.
Следующие два относятся к видеокартам (интегрированной и дискретной)
Что конкретно это означает — нужно смотреть саму таблицу, но смысла в этом не вижу, если все работает. PS … забыл подметить — _BCL — Brightness Control Levels — связано с подсветкой Ошибки не исчезают с опытом — они просто умнеют |
|
hathory |
# (отредактировано 5 лет, 7 месяцев назад) |
|
Темы: 3 Сообщения: 14 Участник с: 26 июня 2017 |
vasek, спасибо большое, да с видеокартами проблема решилась, поставил Bumblebee и ошибки пропали (правда Bluetooth отвалился, но это решабельно, и подозреваю что из-за tlp). Из LPC bus — на ноуте только встроенная камера — bison, подозреваю дело именно в ней. BCL — Brightness Control Levels — нет такой, у старших моделей моей линейки ноутов есть, у моего нет, но видимо BIOS имеет упоминание о подсветке =) vasek, еще раз спасибо большое, прям жить стало приятно. |
[ 12.867697] ACPI Error: No handler for Region [ECRM] (000000005c67776a) [EmbeddedControl] (20180531/evregion-132)
[ 12.867709] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180531/exfldio-265)
[ 12.867724] No Local Variables are initialized for Method [OBTS]
[ 12.867727] Initialized Arguments for Method [OBTS]: (1 arguments defined for method invocation)
[ 12.867728] Arg0: 00000000fa7e36ec <Obj> Integer 0000000000000000
[ 12.867739] ACPI Error: Method parse/execution failed OBTS, AE_NOT_EXIST (20180531/psparse-516)
[ 12.867752] ACPI Error: Method parse/execution failed AMW0.DEVS, AE_NOT_EXIST (20180531/psparse-516)
[ 12.867767] ACPI Error: Method parse/execution failed AMW0.WMBC, AE_NOT_EXIST (20180531/psparse-516)
[ 12.920848] ACPI Error: No handler for Region [ECRM] (000000005c67776a) [EmbeddedControl] (20180531/evregion-132)
[ 12.920861] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180531/exfldio-265)
[ 12.920875] No Local Variables are initialized for Method [OBTS]
[ 12.920878] Initialized Arguments for Method [OBTS]: (1 arguments defined for method invocation)
[ 12.920879] Arg0: 00000000ae4b9fc7 <Obj> Integer 0000000000000000
[ 12.920890] ACPI Error: Method parse/execution failed OBTS, AE_NOT_EXIST (20180531/psparse-516)
[ 12.920903] ACPI Error: Method parse/execution failed AMW0.DEVS, AE_NOT_EXIST (20180531/psparse-516)
[ 12.920918] ACPI Error: Method parse/execution failed AMW0.WMBC, AE_NOT_EXIST (20180531/psparse-516)
[ 12.960632] rtl8192cu 1-2.4:1.0 wlx: renamed from wlan0
cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Pentium(R) CPU J2900 @ 2.41GHz
stepping : 8
microcode : 0x837
cpu MHz : 1332.996
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs : cpu_meltdown spectre_v1 spectre_v2
bogomips : 4831.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Pentium(R) CPU J2900 @ 2.41GHz
stepping : 8
microcode : 0x837
cpu MHz : 1332.896
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs : cpu_meltdown spectre_v1 spectre_v2
bogomips : 4831.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Pentium(R) CPU J2900 @ 2.41GHz
stepping : 8
microcode : 0x837
cpu MHz : 1332.828
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs : cpu_meltdown spectre_v1 spectre_v2
bogomips : 4831.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Pentium(R) CPU J2900 @ 2.41GHz
stepping : 8
microcode : 0x837
cpu MHz : 1332.808
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat
bugs : cpu_meltdown spectre_v1 spectre_v2
bogomips : 4831.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
kernel
4.18.0-11-generic
lspci
00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:13.0 SATA controller [0106]: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller [8086:0f23] (rev 0e) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Atom Processor E3800 Series SATA AHCI Controller [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 88
Region 0: I/O ports at f070 [size=8]
Region 1: I/O ports at f060 [size=4]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at ab415000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [8086:0f35] (rev 0e) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Atom Processor Z36xxx/Z37xxx, Celeron N2000 Series USB xHCI [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 87
Region 0: Memory at ab400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [1043:8534]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at ab200000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at ab100000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: mei_txe
Kernel modules: mei_txe
00:1b.0 Audio device [0403]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [8086:0f04] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller [1043:8693]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 92
Region 0: Memory at ab410000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 [8086:0f48] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: a0000000-ab0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 [8086:0f4c] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ab300000-ab3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 [8086:0f4e] (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Atom Processor Z36xxx/Z37xxx Series Power Control Unit [1043:8534]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Atom Processor E3800 Series SMBus Controller [8086:0f12] (rev 0e)
Subsystem: ASUSTeK Computer Inc. Atom Processor E3800 Series SMBus Controller [1043:8534]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ab414000 (32-bit, non-prefetchable) [size=32]
Region 4: I/O ports at f000 [size=32]
Capabilities: <access denied>
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208B [GeForce GT 720] [10de:1288] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. GK208B [GeForce GT 720] [1043:8670]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 91
Region 0: Memory at aa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at a8000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at ab000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GK208 HDMI/DP Audio Controller [10de:0e0f] (rev a1)
Subsystem: ASUSTeK Computer Inc. GK208 HDMI/DP Audio Controller [1043:8670]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at ab080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 11)
Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:859e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 89
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at ab304000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at ab300000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
Ubuntu 18.10
—
ProblemType: Bug
ApportVersion: 2.20.10-0ubuntu13.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: austinchan 2564 F…. pulseaudio
/dev/snd/controlC0: austinchan 2564 F…. pulseaudio
CurrentDesktop: LXQt
DistroRelease: Ubuntu 18.10
InstallationDate: Installed on 2018-11-19 (28 days ago)
InstallationMedia: Lubuntu 18.10 «Cosmic Cuttlefish» — Release amd64 (20181017.2)
MachineType: ASUSTeK COMPUTER INC. A_F_K31AN
Package: linux (not installed)
ProcFB: 0 EFI VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-generic root=UUID=6d5e2ef8-fae5-4e2b-a5f5-3d4db81bfd0a ro quiet splash vt.handoff=1
ProcVersionSignature: Ubuntu 4.18.0-12.13-generic 4.18.17
RelatedPackageVersions:
linux-restricted-modules-4.18.0-12-generic N/A
linux-backports-modules-4.18.0-12-generic N/A
linux-firmware 1.175.1
Tags: cosmic
Uname: Linux 4.18.0-12-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sudo
_MarkForUpload: True
dmi.bios.date: 03/23/2018
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0407
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: A_F_K31AN
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: Rev 1.xx
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 3
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0407:bd03/23/2018:svnASUSTeKCOMPUTERINC.:pnA_F_K31AN:pvr0407:rvnASUSTeKCOMPUTERINC.:rnA_F_K31AN:rvrRev1.xx:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
dmi.product.family: Desktop
dmi.product.name: A_F_K31AN
dmi.product.sku: All
dmi.product.version: 0407
dmi.sys.vendor: ASUSTeK COMPUTER INC.
|
Description of problem: Since kernel upgrade 4.9.6, startup and shutdown throw the following errors, which dmesg confirms. Reverting to prior kernel 4.8.13 works fine. [ 1.525840] ACPI Error: No handler for Region [ECRM] (ffff99553a6f85a0) [EmbeddedControl] (20160422/evregion-166) [ 1.525844] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160422/exfldio-299) [ 1.525847] ACPI Error: Method parse/execution failed [_TZ.RDEC] (Node ffff99553b0c5e38), AE_NOT_EXIST (20160422/psparse-542) [ 1.525852] ACPI Error: Method parse/execution failed [_TZ.TZS0._TMP] (Node ffff99553b0c5f00), AE_NOT_EXIST (20160422/psparse-542) [ 1.525973] ACPI Error: No handler for Region [ECRM] (ffff99553a6f8ca8) [EmbeddedControl] (20160422/evregion-166) [ 1.525975] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160422/exfldio-299) [ 1.525978] ACPI Error: Method parse/execution failed [_TZ.RDEC] (Node ffff99553b0c5e38), AE_NOT_EXIST (20160422/psparse-542) [ 1.525982] ACPI Error: Method parse/execution failed [_TZ.TZS0._TMP] (Node ffff99553b0c5f00), AE_NOT_EXIST (20160422/psparse-542) Version-Release number of selected component (if applicable): 4.9.6 How reproducible: 100% Steps to Reproduce: 1. Shutdown, startup, reboot 2. 3. Actual results:WiFi will not stay connected more than a minute. htop reports 1 core (of 4) gets pegged near 100%, but with no individual process showing high. Expected results: WiFi should remain connected. Additional info:
Per _nobody_ suggestion, I tried upgrading to kernel 4.9.7. No change, problem is exactly the same.
i have the same issue that beginning with 4.9.6 the wlan connection drops, and asked on linux-pci for advise: http://www.spinics.net/lists/linux-pci/msg58192.html i tried 4.9.9 and the issue is still there. i tried 4.10-rc7 and it seemed gone. but i find it hard to reproduce as sometimes it takes hours until it disconnects. but i do not think the acpi error is related, i am using the LTS kernel 4.4.x and the acpi error is there as well, but wlan works fine. duplicating a link for acpi here which was in the linked discussion thread above: https://wiki.archlinux.org/index.php/DSDT if you could change the title to make clear that it is for the wlan issue?
*********** MASS BUG UPDATE ************** We apologize for the inconvenience. There is a large number of bugs to go through and several of them have gone stale. Due to this, we are doing a mass bug update across all of the Fedora 25 kernel bugs. Fedora 25 has now been rebased to 4.10.9-200.fc25. Please test this kernel update (or newer) and let us know if you issue has been resolved or if it is still present with the newer kernel. If you have moved on to Fedora 26, and are still experiencing this issue, please change the version to Fedora 26. If you experience different issues, please open a new bug report for those.
*********** MASS BUG UPDATE ************** This bug is being closed with INSUFFICIENT_DATA as there has not been a response in 2 weeks. If you are still experiencing this issue, please reopen and attach the relevant data from the latest kernel you are running and any data that might have been requested previously. |
After upgrading to the Linux kernel version 4.9.6-1 from the previous 4.8.x version I have noticed the following errors on startup:
[ 0.534476] ACPI Error: No handler for Region [ECOR] (ffff88011a8a85e8) [EmbeddedControl] (20160831/evregion-166)
[ 0.534492] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[ 0.534504] ACPI Error: Method parse/execution failed [_SB.PCI0.LPCB.H_EC._REG] (Node ffff88011a8ad208), AE_NOT_EXIST (20160831/psparse-543)
[ 10.434408] ACPI Error: No handler for Region [ECRM] (ffff8801189aaf78) [EmbeddedControl] (20160831/evregion-166)
[ 10.435165] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
[ 10.436018] ACPI Error: Method parse/execution failed [_TZ.MDEC] (Node ffff88011a8b35c8), AE_NOT_EXIST (20160831/psparse-543)
[ 10.436837] ACPI Error: Method parse/execution failed [_TZ.TZS0._SCP] (Node ffff88011a8b3780), AE_NOT_EXIST (20160831/psparse-543)
Apart from the errors I haven’t noticed anything problematically different. I have a Lenovo B590 machine.
Although I am not new to Linux, I am reasonably new to Arch Linux so please do let me know if there is any other information I need to provide.
[srinath@Srinath-Thinkpad ~]$ sudo journalctl -p 3 -xb
— Logs begin at Fri 2020-11-06 20:42:43 IST, end at Tue 2020-11-10 10:05:01 IST. —
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: No handler for Region [ECRM] ((____ptrval____)) [EmbeddedControl] (20200528/evregion-127)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200528/exfldio-261)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Aborting method _TZ.RDEC due to previous error (AE_NOT_EXIST) (20200528/psparse-529)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Aborting method _TZ.TZS0._TMP due to previous error (AE_NOT_EXIST) (20200528/psparse-529)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: No handler for Region [ECRM] ((____ptrval____)) [EmbeddedControl] (20200528/evregion-127)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200528/exfldio-261)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Aborting method _TZ.RDEC due to previous error (AE_NOT_EXIST) (20200528/psparse-529)
Nov 10 09:51:23 Srinath-Thinkpad kernel: ACPI Error: Aborting method _TZ.TZS0._TMP due to previous error (AE_NOT_EXIST) (20200528/psparse-529)
Nov 10 09:51:45 Srinath-Thinkpad lightdm[1099]: gkr-pam: unable to locate daemon control file
Nov 10 09:51:48 Srinath-Thinkpad wpa_supplicant[900]: bgscan simple: Failed to enable signal strength monitoring
Nov 10 09:52:36 Srinath-Thinkpad bluetoothd[760]: profiles/audio/avdtp.c:try_send() send: Transport endpoint is not connected (107)
Nov 10 09:52:36 Srinath-Thinkpad bluetoothd[760]: profiles/audio/a2dp.c:a2dp_config() avdtp_set_configuration: Input/output error
[srinath@Srinath-Thinkpad ~]$