Aesmservice sgx is disabled at aesm service startup как исправить

This morning I update my system BIOS from F.35 Rev A to F.36 Rev A and am now getting I am getting this error "AESMService: SGX is Disabled at AESM Service". I checked my bios setting it is set to Software which is what it should say as far as I remember. What is wrong???? Event Viewer: <Event  -...
  • Sign up
  • Sign in
  • HP Community
  • Desktops
  • Desktop Software and How To Questions
  • After BIOS update tp F.36 Rev.A I am getting this error AESM…



Sign in

Create an account on the HP Community to personalize your profile and ask a question

Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

Locked

‎01-27-2021

03:17 PM

— edited

‎01-29-2021

07:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Product: Envy Curved All in One 34

Operating System: Microsoft Windows 10 (64-bit)

This morning I update my system BIOS from F.35 Rev A to F.36 Rev A and

am now getting I am getting this error «AESMService: SGX is Disabled at AESM Service».

I checked my bios setting it is set to Software which is what it should say as far as I remember.

What is wrong????

Event Viewer:

<Event 

<System>

  <Provider NameAESMService« Guid{ce6e83d3-a7d9-4a91-96e0-e018ad574610}« />

  <Keywords>0x8000000000000000</Keywords>

  <TimeCreated SystemTime2021-01-27T18:36:17.9595940Z« />

  <EventRecordID>1872</EventRecordID>

  <Execution ProcessID5184« ThreadID16228« />

  <Channel>SGX/Admin</Channel>

  <Computer>DESKTOP-ODG5CFB</Computer>

  <Security UserIDS-1-5-18« />

  </System>

<EventData>

  <Data NameattrUnicodeString«>SGX is Disabled at AESM Service startup</Data>

  </EventData>

An oddity I have noticed since posting is that it only occurs at Boot up or Restart.

Also PowerDVD which uses SGX for Bluray protected playback does not fault. Blurays and UHD’s disc’s play fine.

Prier Bios did not have ant issues with SGX.

I am on Windows Version 20H2 (OS build 19042.782) which is the latest as far as I know.

If there should be a software update to correct this it has not been released yet.

Intel Driver & Support Assistant reports all Intel software is up to date.

At this point it seems to be a BIOS error and needs to be fixed.

My PC is a  HP ENVY Curved All-in-One PC 34-b0xx

1 ACCEPTED SOLUTION

Rew452

Rew452

Author


24


1


2

691

Level 2

‎02-02-2021

01:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

OK, after several days of no response, I finally found my own answer to this issue.

After screening HP Driver downloads again for this PC I found this update which solves this issue.

Intel Platform ME Firmware Update

2020.2.1220 Rev.A 33.6 MB Jan 6, 2021

It is to bad that HP did not include this information with the BIOS update, since it is also required to complete the update! 

Was this reply helpful?

Yes

No

4 REPLIES 4

Rew452

Rew452

Author


24


1


2

807

Level 2

‎01-27-2021

04:51 PM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Can I rollback to F.35 Rev a?

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

692

Level 2

‎02-02-2021

01:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

OK, after several days of no response, I finally found my own answer to this issue.

After screening HP Driver downloads again for this PC I found this update which solves this issue.

Intel Platform ME Firmware Update

2020.2.1220 Rev.A 33.6 MB Jan 6, 2021

It is to bad that HP did not include this information with the BIOS update, since it is also required to complete the update! 

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

686

Level 2

‎02-02-2021

01:39 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Scratch that, it still ends up with same error AESMService: SGX is Disabled at AESM Service startup about 1-2 minutes latter after restart or boot up.

The ME update must be part of it but not all of it.

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

500

Level 2

‎03-27-2021

04:37 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

After some time I really found the answer,

1. Enter BIOS setting and change from Software Controlled to Enable, Save 

2. Boot into windows

3 Reboot, Enter BIOS settings and change back to Software Controlled, Save,

4. Boot into windows — All Should be fine SGX services

Was this reply helpful?

Yes

No

Warning

Be alert for scammers posting fake support phone numbers and/or email addresses on the community.

If you think you have received a fake HP Support message, please report it to us by clicking on «Flag Post».

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.

  • English

    Open Menu

Powered by Khoros

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href=»https://www8.hp.com/us/en/terms-of-use.html» class=»udrlinesmall»>Terms of Use</a> and <a href=»/t5/custom/page/page-id/hp.rulespage» class=»udrlinesmall»> Rules of Participation</a>.

  • Sign up
  • Sign in
  • HP Community
  • Desktops
  • Desktop Software and How To Questions
  • After BIOS update tp F.36 Rev.A I am getting this error AESM…



Sign in

Create an account on the HP Community to personalize your profile and ask a question

Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.

Locked

‎01-27-2021

03:17 PM

— edited

‎01-29-2021

07:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Product: Envy Curved All in One 34

Operating System: Microsoft Windows 10 (64-bit)

This morning I update my system BIOS from F.35 Rev A to F.36 Rev A and

am now getting I am getting this error «AESMService: SGX is Disabled at AESM Service».

I checked my bios setting it is set to Software which is what it should say as far as I remember.

What is wrong????

Event Viewer:

<Event 

<System>

  <Provider NameAESMService« Guid{ce6e83d3-a7d9-4a91-96e0-e018ad574610}« />

  <Keywords>0x8000000000000000</Keywords>

  <TimeCreated SystemTime2021-01-27T18:36:17.9595940Z« />

  <EventRecordID>1872</EventRecordID>

  <Execution ProcessID5184« ThreadID16228« />

  <Channel>SGX/Admin</Channel>

  <Computer>DESKTOP-ODG5CFB</Computer>

  <Security UserIDS-1-5-18« />

  </System>

<EventData>

  <Data NameattrUnicodeString«>SGX is Disabled at AESM Service startup</Data>

  </EventData>

An oddity I have noticed since posting is that it only occurs at Boot up or Restart.

Also PowerDVD which uses SGX for Bluray protected playback does not fault. Blurays and UHD’s disc’s play fine.

Prier Bios did not have ant issues with SGX.

I am on Windows Version 20H2 (OS build 19042.782) which is the latest as far as I know.

If there should be a software update to correct this it has not been released yet.

Intel Driver & Support Assistant reports all Intel software is up to date.

At this point it seems to be a BIOS error and needs to be fixed.

My PC is a  HP ENVY Curved All-in-One PC 34-b0xx

1 ACCEPTED SOLUTION

Rew452

Rew452

Author


24


1


2

691

Level 2

‎02-02-2021

01:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

OK, after several days of no response, I finally found my own answer to this issue.

After screening HP Driver downloads again for this PC I found this update which solves this issue.

Intel Platform ME Firmware Update

2020.2.1220 Rev.A 33.6 MB Jan 6, 2021

It is to bad that HP did not include this information with the BIOS update, since it is also required to complete the update! 

Was this reply helpful?

Yes

No

4 REPLIES 4

Rew452

Rew452

Author


24


1


2

807

Level 2

‎01-27-2021

04:51 PM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Can I rollback to F.35 Rev a?

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

692

Level 2

‎02-02-2021

01:26 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

OK, after several days of no response, I finally found my own answer to this issue.

After screening HP Driver downloads again for this PC I found this update which solves this issue.

Intel Platform ME Firmware Update

2020.2.1220 Rev.A 33.6 MB Jan 6, 2021

It is to bad that HP did not include this information with the BIOS update, since it is also required to complete the update! 

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

686

Level 2

‎02-02-2021

01:39 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

Scratch that, it still ends up with same error AESMService: SGX is Disabled at AESM Service startup about 1-2 minutes latter after restart or boot up.

The ME update must be part of it but not all of it.

Was this reply helpful?

Yes

No

Rew452

Rew452

Author


24


1


2

500

Level 2

‎03-27-2021

04:37 AM


HP Recommended

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Flag Post

After some time I really found the answer,

1. Enter BIOS setting and change from Software Controlled to Enable, Save 

2. Boot into windows

3 Reboot, Enter BIOS settings and change back to Software Controlled, Save,

4. Boot into windows — All Should be fine SGX services

Was this reply helpful?

Yes

No

Warning

Be alert for scammers posting fake support phone numbers and/or email addresses on the community.

If you think you have received a fake HP Support message, please report it to us by clicking on «Flag Post».

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.

  • English

    Open Menu

Powered by Khoros

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href=»https://www8.hp.com/us/en/terms-of-use.html» class=»udrlinesmall»>Terms of Use</a> and <a href=»/t5/custom/page/page-id/hp.rulespage» class=»udrlinesmall»> Rules of Participation</a>.

1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

1

01.10.2017, 00:24. Показов 5577. Ответов 10


Недавно решил обновить комплектующие компьютера. Но к сожалению, критует систему и перезагружается компьютер.

Kernel Power 41 / AESMService 108

Я так понимаю компьютер перезагружается из за крита Kernel Power 41 ? Долго гуглил , но к сожалению не нашел решение своей проблемы. Переставлял драйвера, выключал звуковой адаптер от Nvidia, тестировал память, процессор и видеокарту, ошибок не вывел.
Вот комплектующие:
Материнская плата MSI H110M PRO-D
Модуль памяти Kingston HyperX Fury DDR4 DIMM 2133MHz *2/8
Жесткий диск 1Tb — Western Digital WD10EZEX Caviar Blue
Блок питания AeroCool Retail VX-500 500W
Процессор Intel Pentium G4600 Kaby Lake (3600MHz/LGA1151/L3 3072Kb)
Видеокарта GigaByte GeForce GTX 1050 1379Mhz PCI-E 3.0 2048Mb

Кликните здесь для просмотра всего текста

System

— Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 5

Level 1

Task 63

Opcode 0

Keywords 0x8000400000000002

— TimeCreated

[ SystemTime] 2017-09-30T20:59:30.746920100Z

EventRecordID 1454

Correlation

— Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer DESKTOP-Q10C8BK

— Security

[ UserID] S-1-5-18

— EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress 0
PowerButtonTimestamp 0
BootAppStatus 0
Checkpoint 0
ConnectedStandbyInProgress false
SystemSleepTransitionsToOn 0
CsEntryScenarioInstanceId 0
BugcheckInfoFromEFI true

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь



0



Programming

Эксперт

94731 / 64177 / 26122

Регистрация: 12.04.2006

Сообщений: 116,782

01.10.2017, 00:24

Ответы с готовыми решениями:

Kernel-power 41 (63)
Всем доброго времени суток.
Проблема такова: после приобретения Монитора Acer Nitro VG270Ubmiipx …

Kernel-power 41 (63)
Уже не знаю что делать.
Проблема началась 15.01.2020. 13.01.2020 был куплен новый монитор. …

Kernel-Power 41
Периодически, во время работы компьютера, происходят зависания с чёрным экраном, избавиться от…

Ошибка kernel power 41 (63)
Собрал компьютер ( на первом фото все компоненты).Спустя 2 недели он начал перезагружаться и…

10

110 / 94 / 19

Регистрация: 09.01.2013

Сообщений: 371

01.10.2017, 11:28

2

С учётом того, что материнка из нижнего ценового класса и не претендует на рекорды производительности проверьте её здесь на совместимость с комплектующими (похоже ОЗУ с завышенными параметрами, нужна поскромнее).
Однозначного ответа на решение вашей проблемы не существует. Напишите в поисковике запрос — компьютер перезагружается из за Kernel Power 41 и почитайте о возможных причинах и методах устранения, возникшей у вас неполадки. Удачи.



0



1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

01.10.2017, 17:30

 [ТС]

3

Вот ближайшие ошибки которые возникают во время перезагрузки. Может поможет разобраться

Kernel Power 41 / AESMService 108



0



Модератор

Эксперт HardwareЭксперт Windows

15149 / 7737 / 726

Регистрация: 03.01.2012

Сообщений: 31,804

01.10.2017, 17:43

4

А если отключить автоматическую перезагрузку при сбоях, синий экран появляется?



0



1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

01.10.2017, 17:44

 [ТС]

5

не пробовал, если отключу есть вероятность что что то сгорит?)



0



Модератор

Эксперт HardwareЭксперт Windows

15149 / 7737 / 726

Регистрация: 03.01.2012

Сообщений: 31,804

01.10.2017, 17:46

6



0



1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

01.10.2017, 23:19

 [ТС]

7

Сейчас подожду экран смерти и скину дамп

Добавлено через 43 минуты
Сделал как указано в статье, выключил автоматическую перезагрузку, но все равно внезапно перезагрузилась система во время игры

Добавлено через 16 минут
Синего экрана нет

Добавлено через 2 минуты
Я еще думаю возможно проблема в БП, есть еще один правда на 350 ват, хватит ли ?

Добавлено через 3 часа 44 минуты
Кажется вылечилось, но не знаю из за чего точно.
1.Выключил разгон в биосе (сам я не разгонял, было по умолчанию)
2.В биосе вручную выставил частоту памяти.
3.Обновил драйвера на чипсет и сетевую карту

Добавлено через 42 минуты
Ошибочка, не решилось



0



1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

01.10.2017, 23:24

 [ТС]

8

На этот раз в то же время вышла ошибка, я так понимаю связана с процессором, может она виновник перезагрузок?

Kernel Power 41 / AESMService 108



0



1 / 1 / 1

Регистрация: 01.10.2017

Сообщений: 30

05.10.2017, 19:46

 [ТС]

9

Продвинулся немного дальше в этом вопросе.
У меня стоит процессор Intel pentium g4600, (2 ядра 4 потока). Вот как то у меня вместо 4 потоков стало 2, (производительность соответственно уменьшилось) но эта ошибка ни разу за элит периуд не появился.
Вот сейчас сновка 4 потока и снова Критует kernel power



0



0 / 0 / 0

Регистрация: 18.11.2017

Сообщений: 2

18.11.2017, 12:50

10

Недавно купил почти точно такую же сборку, разве что видеокарта 1050TI, а процессор G4560, и точно такая же проблема, просто так, с различной периодичностью перезагружается комп, без особых нагрузок. Уже голова кипит.
Обратил внимание что перед каждым критом идет вот такое событие: Фильтр файловой системы «npsvctrig» (версия 10.0, ‎2016‎-‎07‎-‎16T05:28:33.000000000Z) успешно загружен и зарегистрирован у диспетчера фильтров. Но гугл ничего полезного по этому поводу не выдает.
Автор, есть еще продвижения?

Миниатюры

Kernel Power 41 / AESMService 108
 



0



Модератор

Эксперт HardwareЭксперт Windows

15149 / 7737 / 726

Регистрация: 03.01.2012

Сообщений: 31,804

18.11.2017, 12:56

11

reg12, Вот тут подробная статья про исправление ошибок системных файлов



0



Содержание

  1. AESM service critical error
  2. Replies (1) 
  3. After BIOS update to F.34 Rev A on HP ENVY Curved All-in-One — 34-b010
  4. Aesmservice sgx is disabled at aesm service startup windows 10
  5. Нестабильная работа ПК

AESM service critical error

I cannot figure out how to fix this. There seem to be multiple things wrong with my laptop at the moment, which can be possibly attributed my near constant state of low battery.

My laptop charger (as per usual) lost its ability to charge correctly 95% of the time, so that is surely responsible for at least the kernel-power error, but I don’t know the cause of this one.

I also have multiple non-critical errors but I am figuring those out as I go, and I am unable to view my performance monitor (unable to add counters?).

Here’s the log description below:

Log Name: SGX/Admin
Source: AESMService
Date: 7/24/2019 4:50:11 PM
Event ID: 108
Task Category: None
Level: Critical
Keywords:
User: SYSTEM
Computer: MineNew
Description:
AESMService: SGX is Disabled at AESM Service startup
Event Xml:

108
0
1
0
0
0x8000000000000000

81

SGX/Admin
MineNew

SGX is Disabled at AESM Service startup

My name is Andre Da Costa; an Independent Consultant, Windows Insider MVP and Windows & Devices for IT MVP. I’m here to help you with your problem.

Press Windows key + X
Click Device Manager
Expand Batteries
Right-click Microsoft ACPI-Compliant System.
Choose Update Driver Software.
Make sure you are connected to the Internet, the check for updates.

a. turn off the computer and remove the battery and AC adapter.

b. press and hold the power button for 30 secs and reconnect the AC adapter

c. turn ON the computer and continuously tap F2 to boot into the BIOS, when you’re in, press F9 to load defaults and press F10 to save and exit.

d. boot into Windows (while still having just the AC adapter plugged-in) then reinsert the battery.

Check if its working.

Other things you can try.

1. Run Windows 10 Battery Diagnostics

If your battery isn’t fully charging, the first thing you can try is the Battery troubleshooter in Windows 10.

Open Start > Settings > Update & security > Troubleshoot
Scroll down then click Power
Click Run the troubleshooter

Complete the wizard then restart your device to see if the problem is resolved.

Most laptop computers include their own factory diagnostics utilities, too. It is recommended you also use those to test your battery. Accessing the diagnostics will vary by manufacturer, so, consult the documentation that came with your computer. Before you run a test, you might need to first fully charge the device to 99 or 100 percent, disconnect the AC adapter, boot into the diagnostic utility then run the test.

2. Check if Your AC Power Supply is Properly Connected

Sometimes the power cable connected to your AC power supply brick might be loose. Check to make sure it is fitted and secured properly.

3. Try a Different Wall Outlet and Check for Low Voltage and Electrical Issues

The other day, my house had some serious electrical issues going on. You would be amazed how much voltage issues can affect the performance of your system. Plugging in my laptop into an outlet within my room dimmed the light, while an outlet in the living room caused it to wink.

Another room it remained constant but charging was horribly slow. This, of course, meant I had low voltage issues and with so many appliances competing for the little bit of faulty energy, it made it even worse. Ultimately, I ended hiring an electrician to sort out the issues. After fixing it up, my laptop started charging normally.

4. Test with Another Charger

I mentioned the AC power adapter earlier. It’s possible your charger might be the culprit. If you have a working spare laying around the home, give it a try to see if it charges. You can also borrow one from your work colleague if you don’t have any. If you don’t have access to another charger, try yours on another laptop to see if it charges the device.

If you are mixing and matching laptop power adapters, make sure you choose the correct power supply (https://www.amazon.com/s/ref=nb_sb_noss_2?url=s. ). Read the brick and make sure it has the same polarity and voltage as the adapter for your laptop.

5. Remove All External Devices

If you keep external devices such as a smartphone, a USB external drive, mouse, printer and anything else attached to your system while charging, it will take longer for your battery to reach 100%. Make sure you disconnect all of those devices so your system won’t be competing with all the other electronics.

6. Check Your Connectors for Dirt or Damage

If your laptop has a modular battery, remove it then check for any damage or to see if it needs cleaning around the contacts and inside the battery compartment. Also, check if there are any dust particles inside the charging port that might be preventing the battery from charging.

7. Check for BIOS and Chipset Driver Updates

Sometimes your system might be overdue for an update for components such as your BIOS and Chipset. Updates can help resolve bugs that might be preventing the battery from charging efficiently.

8. Press and Release Power Button Reset

Sometimes unknown glitches can prevent the battery from charging. An easy way to fix it is to power down your computer, hold down the power button for 15 to 30 seconds, plug in the AC adapter, then start the computer.

9. Disable Apps and Check Battery Usage in Windows 10

Going back to Windows 10 a bit, recently, I noticed my Surface Pro was taking an unusually long time to charge and the fans started to rev up. Little did I notice the culprit was right there on my Taskbar all along. Slack’s Windows client was waiting in an attempt to connect to the Internet. So, checking your apps to determine whats running in the background can help you not only conserve battery life but limit what prevents it from charging faster.

There are a couple ways to do that. Open Start > Settings > Privacy > Background apps. Scroll down then toggle off the apps that might be preventing your device from reaching a full charge.

Still in Settings, open System > Battery > Battery usage by app. This will tell you which apps are using the most battery and you can make a decision what to do, whether to let Windows decide if it should run in the background while not sacrificing battery life.

10. Replace Charger or Battery Module

Ultimately, if you don’t see any improvements after trying all the above, then it’s maybe best that you replace either the charger or battery itself. This will require contacting your laptop manufacturer and placing an order. Batteries and the chargers are not necessarily cheap, especially if its an older system. But, if you have no choice, its something you will just have to do to get your system back in working order.

Information in the above link is sourced from a trusted Microsoft MVP blog.

After BIOS update to F.34 Rev A on HP ENVY Curved All-in-One — 34-b010

‎01-09-2020 05:16 AM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

After BIOS update to F.34 Rev A on HP ENVY Curved All-in-One — 34-b010 :

I am seeing a Critical Error on windows startup -AESMService: SGX is Disabled at AESM Service startup.

I have checked BIOS setting and it is enabled for software control.

What is going on??

‎01-09-2020 06:36 PM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

Welcome back to the forum.

I am not a HP employee.

1. Do you see the Intel SGX Service and what state exists for this service (Automatic, Manual, or Disabled) in Control Panel, Administrative Tools, Services?

2. Do you see this software in Control Panel, Programs and Features?

Your CPU supports SGX but the Windows SGX software would also have to be installed.

I don’t see this software download option at your PC’s Support site ( Link ).

You may have to contact HP Support ( Link ) unless a different forum member knows what’s happening.

You could use msconfig, Services tab to deselect this service (if it exists) at system startup. This is not a fix but a possible workaround.

You could try disabling SGX in the BIOS, again a workaround.

It is possible the previous BIOS did not have an SGX option. Maybe HP will release SGX Windows software or a new version of IMEI which includes this function.

‎01-09-2020 08:18 PM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

WOW, did not consider that this software drivers was not part of a Windows 10 install or driver update system..

But using your suggestion I checked Services and I don’t find any SGX labeled services.

But doing a search of Windows directory I did find various SGX labeled files so I’m not sure if it’s installed or not.

Thanks for your reply! Doing web searches have not given much about it.

Hopefully someone from HP can reply.

‎01-09-2020 08:23 PM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

I stand corrected using msconfig, I do see an entry for Intel SGX AESM and it is check meaning it’s loaded.

So now I’m really wondering what’s going on.

‎01-09-2020 08:54 PM — edited ‎01-09-2020 09:20 PM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

You’re very welcome.

Did you check the current status of this service in Control Panel, Administrative Tools, Services? Sorry, you did this.

I t may be set to delayed start and be running within a few minutes after starting Windows. My system has this service on a delayed start. It is set to software controlled in the BIOS.

This service does not exist in Administrative Tools-Services on your PC. I would think this is because the Windows SGX software is not installed.

It appears you need the Windows SGX software to get rid of the error message at startup. Try unchecking this service in msconfig. Try disabling the BIOS SGX setting.

‎01-10-2020 08:14 AM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

My windows version is 2004 (OS Build 19041.1)

Did some more checking and Intel’s SGX software has been installed since 02/2019 and if memory serves me the last BIOS version supported SGX services and I had no errors until after this BIOS update to V.34 on 01/06/2020.

As far as I can tell Windows uses the Intel drivers for this since it’s their design.

I’v ran a check for newer SGX drivers with Intel and it seems I’m on the latest.

One more thing it does show in Services as «Intel® SGX AESM» and it also says Delayed Start.

My Event log has never had this critical error before this BIOS update.

Called HP support and since my warranty was expired, have had it since 06/2017 they wanted $99 just to talk.

I have been a long time HP user and I think this will be my last one.

But anyway changing BIOS setting to disable brings up a lot of warnings but does alleviate the error for 1 boot cycle and then returns, seems like it’s fixed at enabled.

It’s a shame when HP can’t or won’t take responsibility for their problems with their BIOS updates.

‎01-10-2020 08:45 AM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

At this point I’m thinking I will install the last BIOS v.33 since it did not have this issue.

Is there any potential problems with rolling back to the last BIOS version?

‎01-10-2020 08:55 AM — edited ‎01-10-2020 08:56 AM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

Did you try unchecking SGX in msconfig? I see you changed the BIOS setting but this did not work. Maybe if both settings are disabled the startup error message will go away.

You could try a BIOS rollback. Some HP BIOS updates are not reversible.

The previous versions for your PC can be downloaded at this ( Link ). Open Revision History, then scroll down to the bottom of the page for download options.

‎01-10-2020 09:18 AM

  • Mark as New
  • Bookmark
  • Subscribe
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

You are right Can’t rollback to V.33 after installing V.34.

You know HP really needs to fully check these things out before releasing; When I was talking to their supposed support they claimed it was a software issue and if this is true why didn’t they also issue a software update as well.

What bothers me is if I turn it off in BIOS just to end the event errors, it appears it leaves my system security is at risk.

Not to mention their sad support options for issues they create with problem bios updates.

For over 20 year I have used and own HP systems both through work and personally and have never seen an issue were they respond like this. They had always made things right when there was a issue with their updates.

BIOS maybe OK but if it requires a software update were is it.

Aesmservice sgx is disabled at aesm service startup windows 10

  • Темы без ответов
  • Активные темы
  • Поиск
  • Правила форума

Нестабильная работа ПК

Amd phenom II x4 965 BE охлождение боксовое.(куллер по дефолту на 100%) уже привык ого ,«Месье знает толк в извращениях»(к)

Может у Вас всё банально просто — вирусы?

Извините я наверно забыл указать. что из за этой проблемы я переставляю винду каждую неделю. так как у меня интернет 200 мегабит аплоад и доунлад мне не очень трудно. но уже надоело.Эти лаги наблюдаются на висте 64 бита при 12 гб оперы.На вин 7 32 бита при 4 гб оперы. на вин 7 64 бита при 12 гб оперы.

P.S Лаги появляются не сразу через неделю к примеру!

Начнем что я делаю с голой виндой.
1.Начинаю ставить Win 7 64 bit.
2.Доход до выбора дисков так как у меня стоит рейд режим.(в нем ссд на полную работает) я подсовываю ему драйвера с диска от материнки ,он просит.
3.Далее ставиться винда.
4. Винда установилась.Устанавливаю драйвер для сетевой карты.
5. Отключаю UAC, отключаю подкачку(так как обьем ссд 30 гб),устанавливаю энергосбережение на макс производительность и убераю что бы он не уходил спать. ребут пк.
6.иду в центр обновлений windows провераю наличие обновлений ставлю все обновления кроме языков и обноружения эксплойтов в механизмах защиты.
7.Ставлю гугл хром,винрар,антивирус,Дрова на видяху, уторрент, в гугл хроме сразу 10+ вкладок,ставлю дрова на мышь roccat kone+ , дрова на клаву roccat valo, дрова на звук roccat kulo 7.1 usb, ребут
8.Беру ssd mini tweaker ставлю галки для оптимизации ssd. ребут
9.Делаю оценку windows что бы появился аэро и все компоненты работали ок.
10.Ставлю игрухи 2-3-5 Обычно это:танки,lol,дьябла 3. и софт для этих игр.
11. Жду пока начнет лагать и начинаю с пункта 1.

P.S в биосе отключен юзб 3 .0 контролер, контролер реалтек хд, вместо IDE стоит RAID(но жесткие диски находяться не в рейде.AHCI не дает увеличение скорости винда. а функция RAID дает(опять же жесткие диски не в рейд массиве)

Больше не чего я не делаю

И ещё через часов 8 . начинает лагать клава. надо высунуть и всунуть юсб провод. лаги заключаються в том что символы медленно печатаються. и пропускает некоторые буквы

Greetings,

Welcome back to the forum.

I am not a HP employee.

Questions:

1. Do you see the Intel SGX Service and what state exists for this service (Automatic, Manual, or Disabled) in Control Panel, Administrative Tools, Services?

2. Do you see this software in Control Panel, Programs and Features?

Your CPU supports SGX but the Windows SGX software would also have to be installed.

I don’t see this software download option at your PC’s Support site (Link).

You may have to contact HP Support (Link) unless a different forum member knows what’s happening.

You could use msconfig, Services tab to deselect this service (if it exists) at system startup. This is not a fix but a possible workaround.

You could try disabling SGX in the BIOS, again a workaround.

It is possible the previous BIOS did not have an SGX option. Maybe HP will release SGX Windows software or a new version of IMEI which includes this function.

Regards

РЕКОМЕНДУЕМ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы

Процесс, известный как Intel® SGX Application Enclave Services Manager, относится к программному обеспечению Intel Software Guard Extensions или Intel® Software Guard Extensions Platform от Intel (www.intel.com).

Описание: Aesm_service.exe не является необходимым для ОС Windows и вызывает относительно немного проблем. Файл aesm_service.exe находится в подпапках C: Windows System32 (в основном C: Windows System32 DriverStore FileRepository sgx_psw.inf_amd64_9008c589d5116a6b или C: Windows System32 DriverStore FileRepository sgx_66_764_764) .98_764_6464 ). Известные размеры файлов в Windows 10/8/7 / XP составляют 3 367 272 байта (33% всех вхождений), 3 364 640 байтов, 720 104 байтов или 3235 112 байтов. Это сервис, и имя сервиса AESMService. Агент управления системными службами для приложений с поддержкой Intel Software Guard Extensions.

Файл aesm_service.exe является файлом, подписанным Microsoft. Программа не имеет видимого окна. Файл имеет цифровую подпись. Файл не является основным файлом Windows. Aesm_service.exe способен мониторить приложения и манипулировать другими программами. Поэтому технический рейтинг надежности 3% опасности .

Если aesm_service.exe находится в подпапках «C: Program Files», тогда рейтинг надежности 14% опасности . Размер файла составляет 3 744 904 байта (66% всех вхождений) или 3 089 680 байтов. Вы можете удалить эту программу в панели управления. Программа не имеет видимого окна. Файл aesm_service.exe сертифицирован надежной компанией. Это не системный файл Windows. Это файл aesm_service.exe. Aesm_service.exe способен мониторить приложения и манипулировать другими программами.

Деинсталляция этого варианта: Если у вас по-прежнему возникают проблемы с aesm_service.exe, вы также можете полностью удалить платформу расширений Intel® Software Guard (Панель управления ⇒ Удалить программу).

Важно: некоторые вредоносные программы маскируют себя как aesm_service.exe, особенно если они находятся в папке C: Windows или C: Windows System32. Поэтому вы должны проверить процесс aesm_service.exe на вашем компьютере, чтобы увидеть, если это угроза. Мы рекомендуем Security Task Manager для проверки безопасности вашего компьютера. Это был один из лучших вариантов загрузки The Washington Post и PC World .

Аккуратный и опрятный компьютер — это главное требование для избежания проблем с aesm_service. Это означает запуск сканирования на наличие вредоносных программ, очистку жесткого диска с использованием 1 cleanmgr и 2 sfc / scannow, 3 удаления ненужных программ, проверку наличия программ автозапуска (с использованием 4 msconfig) и включение автоматического обновления Windows 5. Всегда не забывайте выполнять периодическое резервное копирование или, по крайней мере, устанавливать точки восстановления.

Если вы столкнулись с реальной проблемой, попробуйте вспомнить последнее, что вы сделали, или последнее, что вы установили до того, как проблема появилась впервые. Используйте команду 6 resmon, чтобы определить процессы, которые вызывают вашу проблему. Даже для серьезных проблем, вместо переустановки Windows, лучше восстановить вашу установку или, для Windows 8 и более поздних версий, выполнить команду 7 DISM.exe / Online / Cleanup-image / Restorehealth. Это позволяет восстанавливать операционную систему без потери данных.

Security Task Manager показывает все запущенные сервисы Windows, включая внедренные скрытые приложения (например, мониторинг клавиатуры или браузера, авто вход). Уникальный рейтинг риска безопасности указывает на вероятность того, что процесс является потенциальным шпионским ПО, вредоносным ПО или трояном. B Malwarebytes Anti-Malware обнаруживает и удаляет спящие шпионские, рекламные программы, трояны, клавиатурные шпионы, вредоносные программы и трекеры с вашего жесткого диска.

Связанный файл:

phonecompanionpusher.exe javaupdatescheduler.exe bjpsmain.exe aesm_service.exe wahelper.exe chromodo.exe isesrv.exe vsb.sys hsdservice.exe sysrun.bat ideatouch.

Понравилась статья? Поделить с друзьями:

Читайте также:

  • Adobe photoshop ошибка диска
  • Adobe photoshop как изменить цвет фона
  • Adobe photoshop как изменить цвет текста
  • Aes 256 compute error
  • Adobe photoshop как изменить цвет слоя

  • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии