After effects error unable to decompose matrix 17 45

Render fail ‘Error — Unable to invert matrix’ — what does this mean and how can I fix it?

I’m have a sequence I’m trying to render stop at roughly 230 frames and tell me ‘Error — Unable to invert matrix’  I say roughly 230 frames as it occurs at a different frame each time. I’ve tried switching layers that were active in time line off one by one to find the troubled layer/s but to no avail. The only thing that worked was switching them all off. Does anyone here know what ‘invert matrix’ means?
Thanks, Timothy

Does anyone here know what ‘invert matrix’ means?
How should we? Sorry to be blunt, but the caloric value of your post levels in at zero. You are not telling us anything. Nothing about the footage sources, nothing about your version of AE, not a shred about your comop and render settings, not the slightest hint about your operating system. This could come from anywhere — an effect, a specific CoDec setting, an issue with graphics acceleration. Also provide a screenshot of the error. If the error is really phrased like you posted it, it’s not an AE error. All program internal errors fololow a specific logic and formatting and usually have a numerical code attached which helps to make sebnse of them.
Mylenium

After Effects Error: Unable To Allocate Space…

I have never seen this before…I am stumped.
I am on After Effects 8.0.2 on a PC at work (Windows XP Pro 2002 SP2 / Intel Xeon 3.6 Ghz / 3.25 GB RAM) and I keep getting the following error when rendering:
«After Effects Error: Unable to Allocate Space for 4290 x 4590 image buffer»
My Comp is nowhere near that size (1280 x 720) nor is anything in it (PS document 1200 x 1500 / 720p video / solids are comp size). I have reset Cache sizes until I am blue in the face / have enabled Disk Cache / dumped preferences / cursed at the machine / nothing works.
Any suggestions would be appreciated…thanks.
Joey

Just thinkin; out loud, so sorry if it’s stuff you’ve already considered, Joey:
Any scale settings expanding objects beyond the size of the comp? Text especially can blow out memory when scaled up large.
Same goes for 3D objects close to the camera.
As you’re a Mac-o-file you’ve probably been saved in the past by the extra RAM accessible — SP will only give AE 2GB.

After Effects error: Unable to allocate space for image buffer

I am having some glitchy issues with After Effects, very inconsistent, but I am getting the error message «After Effects error: unable to Allocate Space for a 7500 x 4500 image buffer. You may be experiencing fragmentation. In the Memory and Multiprocessing Preference dialog box, trying increasing the RAM to leave for other applications, and selecting the Enable Disk Cache option in the Media & Disk Cache Panel».
Pretty straightforward, but I have a brand new 8 core dual 2.25 Mac Pro with 16GB Ram. I have it set to allow other applications to use 7GB, have jockeyed that setting between 1GB and 5GB and still gotten the same error message. Disk Cache is set to 3GB, have pushed it all the up to 7GB and still gotten the same message. I am working in 1080p, but I got the error message with Open GL on, quarter resolution, and wasn’t even trying to RAM preview. I also noticed that with a straight 1080p clip .mov animation codec clip, after effects will only RAM preview about 7 seconds. That is without any other layers or effects.  I do not have all of my source footage in one folder, I am going to try that next. I am running of a fast internal hard drive that is not they system drive.  It also seems like it happens after I have been using the comptuer for awhile. If I restart the problem will usually go away for a little while.
I think that I may have a bigger system error, the computer locked up bad once after I had it for a few weeks and since that happened CS4 has been unstable in general, especially Photoshop and Bridge. My guess is bad RAM, but I wanted to make sure I wasn’t missing something with my AE settings.  If any one has any input please let me know. Thanks.

> I lowered the minimum RAM per core to 1GB, because the Adobe site recommends that as a base setting for andHD project
When you say «the Adobe site recommends», what exactly are you referring to? If you’re quoting recommendations written for After Effects on the Adobe website, you’re very likely quoting me. And this is what I wrote in the Help document:
«Memory & Multiprocessing preferences»:
«The amount of RAM required for each background process varies depending on your system configuration; at least 1 GB per process is recommended. Optimum performance is achieved with computer systems with at least 2 GB of installed RAM per processor core.»
This blog post gives essentially the same advice, but with more explicit suggestions.
But, as I say at the bottom of that blog post, if you find that some other settings are working better for you, that’s great. Every project and computer system are different. Do what works for you.
> Also, if it is an
dual quad core system, there should be 8 cores, but in the
multi-processer preferences panel it lists CPU’s as 16.
The number of «virtual» processors can be double in a system that uses hyperthreading. After Effects doesn’t actually treat these as separate processors in this context, though.

PLEASE HELP! Unable to render any Quicktime format — after effects error unable to open file (-1610153459)

I just can’t render any type of Quicktime file in AE CC 2014. I’m on Windows 8.1.
Even in CS6 was it not possible, but I never really used any Quicktime filetypes.
Normally I just rendered to .h264, but now that’s only available via the insane slow Adobe Media Encoder, I want to use the Quicktime -> h.264 option, but it’s just not possible.
I also want to render some footage to the Avid DNxHD codec, but this is also not possible.
Doesn’t matter what type of footage, dslr footage, pictures, AE solids. Everytime I want to render in a Quicktime file I get this error:
AE error: Rendering error while writing to file (File-Location). Unable to open file. (-1610153459)
Installed the latest Windows version of Quicktime, didn’t help…
I saw some topics about this, but they didn’t provide a good solution. All they discussed was the hardware of the computer. I have enough space available and render to a NTFS drive.
Please can someone help me with this!

Yes! I just solved my own problem. I still think that the internet doesn’t provide an easy to find answer, so I will post this.
I had the latest version of Quicktime, but this version causes the problem. After some searching I finally found a page on the Apple website that confirms this.
Updating to QuickTime 7.4 may cause issues while rendering footage in Adobe After Effects — Apple Support
So I uninstalled my latest version of Quicktime and installed version 7.4.1. Everything works now the way it’s supposed to!

«After Effects Warning: Unable to create font.» in CC12.1

I just updated AE to 12.1, and now no fonts work in it.  I originally got the error «Unable to load font «^0» «Helvetica Neue,» but got that one resolved only to get «After Effects Warning: Unable to create font.»  This happens for any area of a comp that has text.  No video will display at all where I have text.
The fonts are activated.  I did find that some of them had somehow turned off since yesterday.  I’m using FontExplorer X for font management.
They worked just fine yesterday in 12.0.  Frustration factor high on this one.
Thanks,
-Doug
OSX 10.8.5

See this thread and ask further questions there:
http://forums.adobe.com/thread/1326590

After Effects Error: Crash in Progress. Last Logged Message was: 2960

When I Quit Aftereffects I got this Error .,. Can Someone tell me how to resolve this .. I am Using Creative Suite 5 Master Collection
After Effects Error: Crash in Progress. Last Logged Message was: <2960> <ASL.ResourceUtils.GetLanguageIDFromRegistry<0> Unable to obtain the User ‘Language’ Registry key at: SoftwareAdoveAfterEffects10.0Defaulting to ‘en_US’.

INTEL XEON S5000XVN PROCESSOR E5410 @ 2.33GHz   2.33GHz
Installed Memory 4GB
System Type 64bit
GRAPHIC CARD
Nvidia Geforce GTX 285

After Effects error:crash occurred while invoking effect plug-in»scripting»

   I made up a bat file with 8 commands like»  afterfx -m -r ….» .
   It will startup 8 AEs and render my work. But when I double the commands with starting 16 AEs,7-8 of them are carshed,says «crash occurred while invoking   effect plug-in»scripting» .
   And «After Effects error: Crash in progress. Last logged message was:<2312><ASL.ResourceUtils.GetLanguageIDFromRegistry><0>Unable to obtain the User ‘Language’ registry key at: SoftwareAdobeAfter Effects10.0Defaulting to ‘en_US’.»
   I am confused for a few days. Need help here.
Warm regards 

Good question, but I would suspect that the previous instances simply never correctly unload and/or parts of the auxiliary services like dynamiclinkmanager or qt32server remain active/ loaded, ultimately causing a conflicht or simpyl chewing up all your memory…
Mylenium

After Effects error: Creating a resource file

Hi everyone
I’m administrating a machine with several users mainly using After Effects. The machine runs on Windows 7 64 bit.
I recently had to install videocopilots Optical Flares. Everything runs fine on my admin account but if i open AE on a user account i get an error message while on the loading screen. It says:
After Effects error: Creating a resource file «c:insert path to OpticalFlares.aex here» (might be a bit different in english as i translated this from german)
Every user has full read and write permission on the AE support files folder. Has anyone ever had such an error? All other plugins work as they should on every account.
Thanks for any hints!
Michael

I still think it is a permissions/ user privileges/ policies/ security issue — if it runs on one account, it is unlikely the plug-in is damaged or you installed the 32bit version in CS5 or vice versa. I strongly suspect the plug-in is unable to probe your graphics card and thus never initializes. Perhaps it’s being blocked by some security tool or your user account doesn’t have the permissions to load system drivers. The latter can be fixed by changing the respective entry in your group policy editor (gpedit.msc). The respective point would be in Computerkonfiguration —> Windows-Einstellungen —> Sicherheitseinstellungen —> Lokale Richtlinien —> Zuweisen von Benutzerrechetn —> Laden und Entfernen von Gerätetreibern. And of course temporarily turn off security stuff to verify it’s not the problem.
Mylenium

After Effects error:creating resource file on Windows

Hi
I have a problem with a set of plugins we are developing. We have about 20 different plugins. But after I apply the 10th plugin, it gives the following error on Windows only (CS6):
After Effects error:creating resource file «….aex» ( 3 :: 0 )
I can have as many instances of the same plugin but once I have a total of 10 different then this error always comes up
One thing that is being enabled in the plugin is this flag:
PF_OutFlag_KEEP_RESOURCE_OPEN
Is this the culprit?
Thanks in advance
DonJ

I still think it is a permissions/ user privileges/ policies/ security issue — if it runs on one account, it is unlikely the plug-in is damaged or you installed the 32bit version in CS5 or vice versa. I strongly suspect the plug-in is unable to probe your graphics card and thus never initializes. Perhaps it’s being blocked by some security tool or your user account doesn’t have the permissions to load system drivers. The latter can be fixed by changing the respective entry in your group policy editor (gpedit.msc). The respective point would be in Computerkonfiguration —> Windows-Einstellungen —> Sicherheitseinstellungen —> Lokale Richtlinien —> Zuweisen von Benutzerrechetn —> Laden und Entfernen von Gerätetreibern. And of course temporarily turn off security stuff to verify it’s not the problem.
Mylenium

After Effects error: opening movie — you do not have permission to open this file (-54)

Hi all,
I’m new to after effects. I have just started receiving the following error every time I try to render my movie:
«After Effects error: opening movie — you do not have permission to open this file (-54)».
Yesterday morning, I was able to render movies, however, after I did Apple’s latest update I’ve started receiving the following error. What is happening is that I’m trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I’ve tried to repair the permissions with disk utility, but that doesn’t seem to have helped.
I’ve searched Google and the Adobe support forums with no luck. Please help.
Thanks in advance for you help,
William

Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
http://discussions.apple.com/thread…347251&tstart=0
Download the right version here:
http://www.apple.com/support/downloads/
Panther: http://www.apple.com/support/downlo…forpanther.html
Tiger: http://www.apple.com/support/downlo…31fortiger.html
Leopard: http://www.apple.com/support/downlo…forleopard.html
Install with Pacifist
http://www.charlessoft.com/
Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store… which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

What does «After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )» mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can’t help me). I’m running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it’s not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is «then hold down Ctrl-Alt-Shift, dummy», and I’ll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven’t been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it’s full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:Program FilesAdobeAdobe Premiere Pro CS6Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can’t continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can’t resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of «Check online for a solution and close the program» or just «Close the program» and lets me View problem details, which are:
Problem signature:
  Problem Event Name:          APPCRASH
  Application Name:          AfterFX.exe
  Application Version:          11.0.0.378
  Application Timestamp:          4f6d63ab
  Fault Module Name:          StackHash_a85b
  Fault Module Version:          6.1.7601.17725
  Fault Module Timestamp:          4ec4aa8e
  Exception Code:          c0000374
  Exception Offset:          00000000000c40f2
  OS Version:          6.1.7601.2.1.0.256.1
  Locale ID:          1033
  Additional Information 1:          a85b
  Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
  Additional Information 3:          f862
  Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

After Effects error: crash occurred while invoking effect plug-in «Looks» URGENT!

My name is Tyler and i’m a Mult-Media Editor in training. Just recently meaning just this project i’ve been getting this error «After Effects error: crash occurred while invoking effect plug-in “Looks”.» every time i try to render. If i try to remove the clip where it messes up and replace it with another it will just mess up in another spot.
Screen Shot Here:http://gyazo.com/794429fd1091973c8a296a27d2af6fab.png
Information:
AE: After Effects CS5 (64-bit)
OS: Windows Home Premium (64-bit)
RAM: 8gb
Processor: 1st Gen. i7 Quad-Core
Graphics Card: NVIDIA GeForce GT 320
Updates: Installed All Updated For Adobe Products
Source Footage: Call Of Duty: Modern Warfare 2 @ 60fps using UT Video Codec YUV 420
Worked Before? Yes
Open GL: My open gl is not enabled
I’ve read other forums and watched tutorials. I’ve already done the following. (Not in order used)
1. Downgrade Magic Bullet Looks from 1.4.3 to 1.4.2 (Didn’t Work)
2. Upgrade Magic Bullet Looks to MBL 2.0 from Magic Bullet Suite 11 (Didn’t Work)
3. Uninstall my gfx card and re-install it with the newer version (Didn’t Work)
4. Reset AE preferences by pressing alt+shift+ctrl on the shortcut (Didn’t Work)
5. Change render settings from H.264 -> .AVI (Didn’t Work)
6. I’ve deleted «AE_OpenGL» from my After Effects folder (Didn’t Work)
My Composition:
http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.png
http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.png
The look file is not that complex but i don’t know if it’ll help but there it is.
Look File Settings:
http://gyazo.com/25346bb318edadc54e09273977964c7d.png
I’ve never had this problem before and hope that someone has a solution to this problem… if so please post an answer. I don’t know if its because i put the plug in on all of my clips and then made an adjustment layer with another Magic Bullet Looks or if it’s my clips fault but i just dont know what to do.
-Tyler

It sounds like Looks is only crashing on this project. If that is so then it’s most likely a problem with one of your video clips. Either there’s a corrupted frame or some other codec glitch that’s throwing the errors. I’d suggest replacing footage items with temporary footage. You could even use solids. Replace one at a time, then undo, until you find the footage that’s causing the crash. Then either re-compress that footage to another codec or replace it.
If Looks is crashing on every type of footage then you need to pursue other options that are more system related.

After Effects Error «error cannot be imported this moov file is damaged or unsupported»

I’m working on a AE project and shut the project down before going to lunch. I come back and open it up and I get this error:
after effects error cannot be imported this moov file is damaged or unsupported
Nothing had changed in my project since earlier today. I’ve tried to import other .mov’s and get the same error, I’ve also tried to relink the footage.
Any thoughts?

We need to know a lot more if we’re going to help you. Please provide answers to the questions listed here: «FAQ: What information should I provide when asking a question on this forum?»
If you’re using After Effects CC (12.0), start here for QuickTime issues:
http://bit.ly/QT_AE_CC_12

After effects error: rendering error while writing to file. Disk full.

Hi,
I tried to render a video in AE CC 2014, with RGB + Alpha as I wanted to keep the background transparent (rotoscoped) so that I can then use it in Premiere.
I chose to export in Quicktime, with uncompressed 8bit.
After it rendered it for a little while I had a window pop-up saying
After effects error: rendering error while writing to file «E:…blabla». Disk full. The file may be damaged or corrupted. (-1610153463).
I read a thread posted in the forums but i do not understand the solution provided there.. What is a POD??
I have a Win7 Ultimate, x64. Plenty of disk space, and 16 Go ram.
Please help, I canoot go further in my project with this bug…
Jaywaii

Is the drive you are rendering to formatted FAT32 by any chance? If so you can only render up to 4Gb for one file. Try rendering out a TIFF sequence instead. Litte tip — push the LZW compression tickbox in format options for a lossless compression, this will keep you file size way down.

After effects error: try to get the value of a stream of time without key values

Hi gang! Does anyone had this error on after effects CC2014. Installed software updates from red giant and the movie convert updates and now, after the effects themselves will not relax this error and the function. Help!

Hey Rick! Just having the time Aha…

After clearing the 150 GB of disk space, uninstall and reinstall, allocating cache, etc. it seems to be the latest version of the movie convert Pro. I uninstalled and reached out to the crew at the monkey rubber.

Thank you for your help. Dodo…

After effects error: could not import the ‘Sweet CC Beta.jsx’: type of file not supported or extension.

OK, so that is the problem. I wanted to try the all new beta after effects candy but when I try to open the file it just straight up with the error in the title. I’m on a MacBookPro running the Mavericks. Does anyone else have this problem?

You do not open a jsx file, run you from the file > Scripts menu. Just give a try.

After effects error: could not find the main entry point for TitlerAfterEffectsHost.plugin

Hello

When start after effect CS6, I get this error message.

Any ideas on how to solve this problem.

Michael Smith

As Mylenium says it’s a mistake to third party plug-ins, the titration module NewBlueFX plug-ins. I would like to ask for help with their plug-in:

http://NewBlueFX.com/support

Adobe After Effects error: impossible to replace adobe after effects 9.0 file!

Its when ever I go to edit/Prefrences/change a setting and press ok.

Delete the Preferences file, and then restart After Effects.

After Effects CS4 preferences directory is here on Windows:

C:Users[user_name]AppDataRoamingAdobeAfter Effects9.0

In addition, bumping a thread after only half an hour on Sunday shows an unrealistic impatience. You can’t expect people to help immediately, especially on Sunday.

After effects error: the Photoshop file format error (- 1). (45: 35)

After Effects worked PERFECTLY for me earlier today. Now, he won’t cooperate.
I only use AE to correct the colors and the rendering/export short sequences to use first or Final Cut…
Im working with DNG that have been converted from MLV files, sequences (I use the video hack gross magic lantern on a 5 dm 3).

Out of nowhere, whenever I try to import any DNG sequences, sequences of CR2, CR2 or DNG files, I get this error…

After effects error: the Photoshop file format error (- 1). (45: 35)

No matter which set of DNGS I open gives me error. Ive tried re-conversion of several files MLV (perhaps there were corrupt officials?) and their import again, but no luck.

Ive tried uninstalling AE and re installation with no luck.
I tried the updated Camera Raw to the latest version with no luck too. (Adobe — Adobe Camera Raw and DNG Converter: for Macintosh)

Does anyone know why AE would simply stop working with my DNG sequences all of a sudden?
It makes absolutely no sense to me.

(Running on a macbook pro end 2013)

Well, after 4 hours of trying to understand this point, I did.
Including use of that Camera Raw 9.5 it won’t work with AE. 9.1 will alone.
Still doesn’t explain why it has just stopped working in the first place well…

Cannot return: after effects error: failure of the internal audit. What can I do?

I need to render a model (defaults to h.264) and the process is terminated with the following error: «after effects error: failure of internal audit, sorry! {could not find itemframe earlier, we checked in} ».

What can I do? I tried to restart Ae several times. The rendering stops at random points, when started again. The model is very simple: a background of movie mp4, PNG images fixed one after the other with opacity and editing texts and write-on 1 mask at their side, explaining the images. Thanks in advance for any help.

Use Adobe Media Encoder to change the background of the MP4 in a proper production codec (QuickTime with the Photo-JPEG codec would be a good thing.)

Replace with the MOV MP4 and see if it works.

970 GTX unsupported? After effects error: drawn in the 3D Department: Initial shader compilation failed (5070: 2)

I am disappointed that my MSI GTX 970 is not supported for 3D ray-traced in Adobe after effects CC 2014.
My configuration:
Intel Core i7 4790 k 4.4 GHz
8 GB DDR3 1333 MHz RAM (fix 16 GB soon)

MSI GTX 970 games 4G

Windows 8.1 Pro x 64

Card GPU:

(Not available — GPU CUDA driver or incompatible device)

OpenGL

CUDA

I don’t have the option «Enable CPU untested, not taken in charge for acceleration or traced to the 3D renderer Ray CUDA» but when I have him allow, I get an error saying:
«After effects error: drawn in the 3D Department: Initial shader compilation failed.» (5070:: 2) «.

then

«After Effects Error: drawn in the 3D Department: unable to create the context for Raytracer (5070: 2)» «

then another

«After Effects Error: drawn in the 3D Department: paged memory mapped to a Raytracer.» Your project may exceed the limits of the GPU. Close other applications. Try to update the CUDA driver. (5070:: 2) ‘

I have the latest Nvidia driver. Anyway to fix this? Or I have to wait for Adobe support my GPU?

I’d suggest ditching forced the C4D and ray traced rendering engine instead of use: Details of CINEMA 4 d with After Effects integration

I mean, it’s more powerful and it’s free!

If you absolutely need to use ray-traced rendering engine, what are you trying to use it on? Try it with only a layer of simple form you need to do 3d just to eliminate the problems of others, possibly complications, a project. What CC 2014 version are you running? 13.1? 13.2?

Don’t forget, Adobe is never going to add to the list supported for rendering engine raytraced as they develop is more this feature.

After effects error: rendering error while writing to the file. The disk is full.

Hello

I tried to return a video in AE CC 2014, with RGB + Alpha because I wanted to keep the background transparent (rotoscoped) so that I can then use it in first.

I chose to export to QuickTime, with uncompressed 8-bit.

After he made it for a little while, I had a pop up window saying

After effects error: error in rendering when writing to the file «E:… blabla». The disk is full. The file may be damaged or corrupted. (- 1610153463).

I read a thread posted in the forums, but I don’t understand the solution here… What is a POD?

I have a Win7 Ultimate, x 64. A lot of disk space and 16 GB of RAM.

Please help, I canoot go further in my project with this bug…

Jaywaii

Is the drive in FAT32 formatted accidentally? If so, you can only restore up to 4 GB for a single file. Try to make a TIFF sequence instead. Tip of litte — press the LZW compression checkbox in the options for a lossless compression format, this allows you to keep the path file size down.

After effects error — data missing 33::4 file

Hi all

After editing my last picture, I decided to return. The problem is for my rendering AE crashed. I tried to recover my previously saved file (auto-sauvé I need to talk) and the error

After effects error: missing data file. (33::4)

I work on a MacBook Pro OX El Capitan. AE has been problematic but never encountered this error.

I need to talk to I have save just before the rendering of which is problematic… as I really wanted what I made before.

If anyone can help, much appreciated.

Thank you!

[Moved the program forum where experts live…] MOD]

Well, so much for that. Your file has disappeared. For any future reference:

Safety of working file. Error postal codes of Mylenium

Mylenium

SRM 5.5 — vSphere replication — error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

More worrisome is the virtual machine which don’t reprotect at all. It generates an error whenever I click on the «Restore» button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

Does anyone have any ideas as to the cause?

Thanks in advance for any help.

Andy

Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the ‘fade’ snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

After effects error: error in file Photoshop 3415 (45: 35)

I just installed after effects CC 2015 today and then installed an update to After Effects dealing with Adobe Camera Raw. I am running Windows 7. Now I cannot import .dng filmed on the Blackmagic film camera in After Effects. CAB opens and shows me the first image in the DNG sequence very well but when I close the ADR I get the error message:

After effects error: 3415 Photoshop file format error.

(45: 35)

The image I see in After Effects is therefore the HD Bars and tone, which indicates a missing file or not visible.

Suggestions?

The update of the corrections after effects CC 2015 (13.5.1) is available, and it has some difficulties in this area: http://adobe.ly/1Il5JYe

Let us know how it works for you after installing the update.

I just bought the teachers edition and Creative Cloud student (one year) and I’m unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

I just bought the teachers edition and Creative Cloud student (one year) and I’m unable to install After Effects. He always says: the trial version has expired. I tried to uninstall and install again, but it does not work. Please help me.

See if the following can help:

Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

https://helpx.Adobe.com/Creative-Suite/KB/trial—1-launch.html

Log, activation, or connection errors. CS5.5 and later, Acrobat DC

https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

After effects error: plugin ‘Element.aex’ could not be loaded (126). (48::46)

I bought item 3D V2 today and I’ve updated since v1.6 (which worked fine). When I create a solid and you try to add the effect of the element, I get this error message.

«After effects error: plugin ‘Element.aex’ could not be loaded (126).» (48::46) »

I did some research and could not find anything except a guy on another forum who had the same problem. He said that the problem is a corrupt file openCL.dll and fixed it by simply replacing the file.

I think that might be my problem I do not know how to identify and replace the file. I tried to reinstall the plugin etc with no result.

Windows 10 Technical preview

Intel Core i7

NVIDIA GeForce GT650m

8 GB ram

«Here is a link to the other forum: AE error:»Plugin could not be loaded»» Timeclub

I browsed the Nvidia site and found a driver windows 10 and updated my graphics card. Problem solved.

After effects error: Preview RAM needs 2 or more images for playback.

Hey all, I recently had this problem with my Adobe after effects (Version 13.2.0.49) CC. I had this on my previous version and after the update to the latest version of the software, I always get the ‘After Effects error: Preview RAM needs 2 or more images for playback‘ each time I try preview RAM. I also have completely uninstalled and reinstalled AE and attempted to purge the of memory, but I still don’t have the same error.

Another question (not sure whether or not it is related to the error of RAM Preview?), is that when I press the play button, the green bar that is usually created at the playhead appears for 1 frame, then goes immediately after the playhead moves to the next frame.

Any help would be appreciated

Thank you!

Yosemite OSX 10.2

After effects CC Version 13.2.0.49 (2014)

I recorded the question with the Green disappears bar and it embedded below:

Hi, SLP,.

Sorry, you hit this bug. We know about the problem and are working on a fix. We apologize for the inconvenience.

Thank you

Kevin