Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
The reason I wanted to install the newest version was due to an issue I was facing whenever the cache hits 12%, for some reason, the Hard drive where I keep my games and use a separate SSD to accelerate it gets corrupted, and every time it happens I have to clear the cache to make the errors go away. I’ll leave my specs below just in case.
PC Specs
Ryzen 5 2600 Stock
Biostar Racing B450GT3 (Latest Bios version)
2x8GB XPG ADATA Z1 2666Mhz C19 (OC to 3200Mhz C14)
RX 570 4GB
Crucial SSD MX500 120GB (OS)
SSD Kingston A400 120GB (Cache)
HDD Western Digital 1TB (General Backup, no Storemi Caching on this one)
HDD Seagate Barracuda 1TB (Games and cached via Storemi to make it faster)
PSU: Thermaltake Smart Pro RGB 650W (I know, this PSU is kinda overkill for this setup)
Содержание
- Drivers & Software
- Drivers & Software
- Drivers & Software
- Drivers & Software
Drivers & Software
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
The reason I wanted to install the newest version was due to an issue I was facing whenever the cache hits 12%, for some reason, the Hard drive where I keep my games and use a separate SSD to accelerate it gets corrupted, and every time it happens I have to clear the cache to make the errors go away. I’ll leave my specs below just in case.
Ryzen 5 2600 Stock
Biostar Racing B450GT3 (Latest Bios version)
2x8GB XPG ADATA Z1 2666Mhz C19 (OC to 3200Mhz C14)
Crucial SSD MX500 120GB (OS)
SSD Kingston A400 120GB (Cache)
HDD Western Digital 1TB (General Backup, no Storemi Caching on this one)
HDD Seagate Barracuda 1TB (Games and cached via Storemi to make it faster)
PSU: Thermaltake Smart Pro RGB 650W (I know, this PSU is kinda overkill for this setup)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After a long effort working with it I found Store MI to be a difficult and limited option for drive cache solution. I went with PrimoCache and have been more than happy ever since. They have a free 30 day trial and a non-intrusive install/uninstall. It has an improved method of NVMe cache that also uses an allocation, you set, of unused system RAM as a buffer for all drives. It is highly recommended by Linus Tech Tips based on a comparison he did along with Store MI and Intel Optane. He found PrimoCache to be the best performer, most scalable, and infinitely flexible. It literally is a few clicks and a couple of seconds to do all its functions from install, use, adding/removing any kind of drive, and uninstall.
With level 1 enabled using 4GB of system RAM I set for cache use I get 17-22 GBs read/write speeds even on my external USB HDD. Level 2 sets the NVMe cache buffer and they can work together or separate. If you decide you want to keep it a lifetime license is $30 and you can use it on your future PC each time you upgrade for life. I suggest you give the free trial a try if like me you want mega fast drive performance on every type of drive you plug in with one click ease of use.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am concerned about PrimoCache, but I live in Brazil so that’s not an option since the dollar here is too expensive. StoreMI, however, is the only thing I can make use of for now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how is that option possible?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Has anyone else found a solution to this that does not require a clean installation?
AMD support hasn’t been able to help with this problem after about 8 emails. The best suggestion they have provided is to try plugging into a different port in case the SATA ports aren’t all being serviced by the AMD chipset (they are in my case).
Never had any problems like this with Intel RST and their support was very good when anything came up with other software or drivers.
Источник
Drivers & Software
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
The reason I wanted to install the newest version was due to an issue I was facing whenever the cache hits 12%, for some reason, the Hard drive where I keep my games and use a separate SSD to accelerate it gets corrupted, and every time it happens I have to clear the cache to make the errors go away. I’ll leave my specs below just in case.
Ryzen 5 2600 Stock
Biostar Racing B450GT3 (Latest Bios version)
2x8GB XPG ADATA Z1 2666Mhz C19 (OC to 3200Mhz C14)
Crucial SSD MX500 120GB (OS)
SSD Kingston A400 120GB (Cache)
HDD Western Digital 1TB (General Backup, no Storemi Caching on this one)
HDD Seagate Barracuda 1TB (Games and cached via Storemi to make it faster)
PSU: Thermaltake Smart Pro RGB 650W (I know, this PSU is kinda overkill for this setup)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After a long effort working with it I found Store MI to be a difficult and limited option for drive cache solution. I went with PrimoCache and have been more than happy ever since. They have a free 30 day trial and a non-intrusive install/uninstall. It has an improved method of NVMe cache that also uses an allocation, you set, of unused system RAM as a buffer for all drives. It is highly recommended by Linus Tech Tips based on a comparison he did along with Store MI and Intel Optane. He found PrimoCache to be the best performer, most scalable, and infinitely flexible. It literally is a few clicks and a couple of seconds to do all its functions from install, use, adding/removing any kind of drive, and uninstall.
With level 1 enabled using 4GB of system RAM I set for cache use I get 17-22 GBs read/write speeds even on my external USB HDD. Level 2 sets the NVMe cache buffer and they can work together or separate. If you decide you want to keep it a lifetime license is $30 and you can use it on your future PC each time you upgrade for life. I suggest you give the free trial a try if like me you want mega fast drive performance on every type of drive you plug in with one click ease of use.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am concerned about PrimoCache, but I live in Brazil so that’s not an option since the dollar here is too expensive. StoreMI, however, is the only thing I can make use of for now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how is that option possible?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Has anyone else found a solution to this that does not require a clean installation?
AMD support hasn’t been able to help with this problem after about 8 emails. The best suggestion they have provided is to try plugging into a different port in case the SATA ports aren’t all being serviced by the AMD chipset (they are in my case).
Never had any problems like this with Intel RST and their support was very good when anything came up with other software or drivers.
Источник
Drivers & Software
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
The reason I wanted to install the newest version was due to an issue I was facing whenever the cache hits 12%, for some reason, the Hard drive where I keep my games and use a separate SSD to accelerate it gets corrupted, and every time it happens I have to clear the cache to make the errors go away. I’ll leave my specs below just in case.
Ryzen 5 2600 Stock
Biostar Racing B450GT3 (Latest Bios version)
2x8GB XPG ADATA Z1 2666Mhz C19 (OC to 3200Mhz C14)
Crucial SSD MX500 120GB (OS)
SSD Kingston A400 120GB (Cache)
HDD Western Digital 1TB (General Backup, no Storemi Caching on this one)
HDD Seagate Barracuda 1TB (Games and cached via Storemi to make it faster)
PSU: Thermaltake Smart Pro RGB 650W (I know, this PSU is kinda overkill for this setup)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After a long effort working with it I found Store MI to be a difficult and limited option for drive cache solution. I went with PrimoCache and have been more than happy ever since. They have a free 30 day trial and a non-intrusive install/uninstall. It has an improved method of NVMe cache that also uses an allocation, you set, of unused system RAM as a buffer for all drives. It is highly recommended by Linus Tech Tips based on a comparison he did along with Store MI and Intel Optane. He found PrimoCache to be the best performer, most scalable, and infinitely flexible. It literally is a few clicks and a couple of seconds to do all its functions from install, use, adding/removing any kind of drive, and uninstall.
With level 1 enabled using 4GB of system RAM I set for cache use I get 17-22 GBs read/write speeds even on my external USB HDD. Level 2 sets the NVMe cache buffer and they can work together or separate. If you decide you want to keep it a lifetime license is $30 and you can use it on your future PC each time you upgrade for life. I suggest you give the free trial a try if like me you want mega fast drive performance on every type of drive you plug in with one click ease of use.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am concerned about PrimoCache, but I live in Brazil so that’s not an option since the dollar here is too expensive. StoreMI, however, is the only thing I can make use of for now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how is that option possible?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Has anyone else found a solution to this that does not require a clean installation?
AMD support hasn’t been able to help with this problem after about 8 emails. The best suggestion they have provided is to try plugging into a different port in case the SATA ports aren’t all being serviced by the AMD chipset (they are in my case).
Never had any problems like this with Intel RST and their support was very good when anything came up with other software or drivers.
Источник
Drivers & Software
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
The reason I wanted to install the newest version was due to an issue I was facing whenever the cache hits 12%, for some reason, the Hard drive where I keep my games and use a separate SSD to accelerate it gets corrupted, and every time it happens I have to clear the cache to make the errors go away. I’ll leave my specs below just in case.
Ryzen 5 2600 Stock
Biostar Racing B450GT3 (Latest Bios version)
2x8GB XPG ADATA Z1 2666Mhz C19 (OC to 3200Mhz C14)
Crucial SSD MX500 120GB (OS)
SSD Kingston A400 120GB (Cache)
HDD Western Digital 1TB (General Backup, no Storemi Caching on this one)
HDD Seagate Barracuda 1TB (Games and cached via Storemi to make it faster)
PSU: Thermaltake Smart Pro RGB 650W (I know, this PSU is kinda overkill for this setup)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
After a long effort working with it I found Store MI to be a difficult and limited option for drive cache solution. I went with PrimoCache and have been more than happy ever since. They have a free 30 day trial and a non-intrusive install/uninstall. It has an improved method of NVMe cache that also uses an allocation, you set, of unused system RAM as a buffer for all drives. It is highly recommended by Linus Tech Tips based on a comparison he did along with Store MI and Intel Optane. He found PrimoCache to be the best performer, most scalable, and infinitely flexible. It literally is a few clicks and a couple of seconds to do all its functions from install, use, adding/removing any kind of drive, and uninstall.
With level 1 enabled using 4GB of system RAM I set for cache use I get 17-22 GBs read/write speeds even on my external USB HDD. Level 2 sets the NVMe cache buffer and they can work together or separate. If you decide you want to keep it a lifetime license is $30 and you can use it on your future PC each time you upgrade for life. I suggest you give the free trial a try if like me you want mega fast drive performance on every type of drive you plug in with one click ease of use.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I am concerned about PrimoCache, but I live in Brazil so that’s not an option since the dollar here is too expensive. StoreMI, however, is the only thing I can make use of for now.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Ok, I guess I solved the issue by making a clean (the zero factory option, which requires a system restart) installation of my graphics card driver, now I could successfully install the newest version of Storemi.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how is that option possible?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Has anyone else found a solution to this that does not require a clean installation?
AMD support hasn’t been able to help with this problem after about 8 emails. The best suggestion they have provided is to try plugging into a different port in case the SATA ports aren’t all being serviced by the AMD chipset (they are in my case).
Never had any problems like this with Intel RST and their support was very good when anything came up with other software or drivers.
Источник
Question Can’t update CPU. StoreMI Installation fail.
-
Thread starterGgarnt
-
Start dateOct 21, 2022
-
- Sep 2, 2022
-
- 8
-
- 0
-
- 10
-
- 0
-
#1
Anyway around this? Manual Install?
-
- Mar 16, 2013
-
- 161,377
-
- 13,426
-
- 176,090
- 24,454
-
#2
Why, specifically?
What is the full parts list in this system?
-
- Oct 16, 2017
-
- 9,113
-
- 2,363
-
- 46,440
- 1,814
-
#3
AMD StoreMI keeps failing installation. Can’t update my drivers. Error Code: 65536Anyway around this? Manual Install?
Some solutions I’ve seen, and this assumes you have the necessary AMD hardware — Ryzen processor, motherboard of course.
Completely uninstall and clean-up AMD chipset and GPU (if you have one) drivers. Use the AMD cleanup utility and DDU to be sure, then reinstall with the latest. Do the same even if you have an Nvidia GPU but ever had an AMD GPU in the past.
Another was to remove all drives EXCEPT the SSD and HDD that will be used for the StoreMi volume. Once installed and set up re-attach the other drives.
I used StoreMi for a while; it was OK but not nearly as good as you might think for games. When playing a game it was like hitting a brick wall whenever the game didn’t find needed data on the SSD. Games are huge these days meaning a small SSD isn’t likely to hold data for long if you’ve several you like to play so it too frequently hit that brick wall. Considering how cheap SATA SSD’s are it’s really not that much of a benefit IMO.
And then uninstalling was a pain. I tried using their process and still couldn’t get the system back the way it was so I had to flatten the system and re-install everything from scratch.
Absolutely keep frequent backups of user data kept on any of the StoreMI volume drives. If any drive fails, it’s all gone.
Last edited: Oct 22, 2022
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
|
Question CPU i3 to i7. Bios wont update | CPUs | 6 | Yesterday at 6:19 PM |
|
|
Question New cpu installed, no display, updated bios too. | CPUs | 16 | Yesterday at 4:22 PM |
|
M
|
Question Do I need to change mobo if I update CPU? | CPUs | 4 | Jan 9, 2023 |
|
S
|
Question How to install or update Drivers using Command Prompt in Windows 11 ??? | CPUs | 24 | Jan 6, 2023 |
|
P
|
Question Problem updating chipset drivers for 5800X3D on my B550-Gaming motherboard | CPUs | 6 | Dec 27, 2022 |
|
M
|
Question Upgraded CPU without updating motherboard, black screen. Put back old cpu to update motherboard, black screen, help! | CPUs | 22 | Dec 24, 2022 |
|
L
|
Question cpu upgrade/bios update | CPUs | 8 | Dec 19, 2022 |
|
|
Question 5900x not working with B450 Aorus | CPUs | 11 | Dec 18, 2022 |
|
|
Question Visual glitching/tearing after installing new CPU | CPUs | 2 | Dec 13, 2022 |
|
|
Question What is CPU microcode? (In BIOS update notes) | CPUs | 4 | Dec 13, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
- All Results
-
Online
-
Free
-
Stores
- Post Your Comments?
Solved: Storemi installation failed, error 65536
Preview7 hours ago Storemi installation failed, error 65536 Jump to solution Hello there, I tried to install the newest version (2.1.0.159) of AMD Storemi, but the installation keeps failing and presenting the error code 65536, I uninstalled the previous version (2.1.0.150), and it left without a trace, and now I cannot install the newest version due to this error.
See Also: Free Catalogs Show details
Solved: Re: StoreMi error 65536 AMD Community
6 hours ago WebOKAY, i can FIX it: i have 3 disk (1 nvme 970 evo, 2 nvme 980, 3 hdd 4tb), i go to device manager and off my 2 nvme, and i can install
See Also: Free Catalogs Show details
StoreMI error 65536 : r/techsupport reddit
Preview3 hours ago WebFOUND THE SOLUTION! Remove all the disks except one ssd and one hdd. Then install it, reboot, shutdown, plug all the disks you unplugged, start up and viola! The problem …
See Also: Free Catalogs Show details
Attempting to install AMD StoreMI, but getting «Error …
Preview5 hours ago WebAttempting to install AMD StoreMI, but getting «Error code: 65536» thrown at me and fails to install. I’m trying to install AMD Store MI on my system, but for some stupid reason, it refuses to install. All the black CMD boxes …
See Also: Free Catalogs Show details
Forums Linus Tech Tips
Preview5 hours ago WebIm trying to install AMD‘s StoreMI 2.0 (v2.0.0.0130 aka the one you get form their website). But every time I try in the end the installer tells me «Installation Failed. Rolling back …
See Also: Free Catalogs Show details
StoreMI 2.0.1.150 installation issue with B450 and Ryzen 3 …
Preview5 hours ago WebToday I try StoreMI 2.0.1.159, same problem as in StoreMI 2.0.1.150 ( storeMI does not support ) Also CPU Ryzen 3 2200G and B450 based MB. UPD. Now …
See Also: Free Catalogs Show details
After trying to install Storemi 2.0, I got BSOD Linus Tech …
Preview6 hours ago WebI install storemi 2.0 form AMD‘s website After reboot, I got BSOD with message «inaccessible boot device » Does anyone here have same problem? MB: GIGABYTE X570 AORUS ELITE WIFI with F12e …
See Also: Free Catalogs Show details
Error 65536 In LabVIEW RealTime NI
Preview2 hours ago WebError 65536 occurred at an unidentified location Possible reason (s): CompactRIO (Hex 0x10000) Unable to communicate with the module. Reinsert the …
See Also: Free Catalogs Show details
Anyone install successfully installed amd storemi v2?
PreviewJust Now Webnot yet but i relised that i am using pny nvme as boot drive after installed the driver.it did not change to scsi but my samsung nvme turned to scsi so i assume that …
See Also: Free Catalogs Show details
[FIX] Error Code 65536 in COD Modern Warfare Appuals
![[FIX] Error Code 65536 in COD Modern Warfare Appuals](https://daily-catalog.com/pictures/OIP.rh-oq8BfgQRpBCPoOs0CjgHaEq)
Preview9 hours ago WebTo perform a network reboot, inspect your router and find the ON / OFF button (power button). When you see it, press on it once to cut off power to your network device.This will end up interrupting the …
See Also: Free Catalogs Show details
Please leave your comments here:
Технология AMD StoreMI появилась вместе с выходом материнских плат на чипсетах серии 4xx, для второго поколения процессоров Ryzen. Эта технология позволяет использовать SSD и HDD вместе таким образом, чтобы часто используемые данные хранились на SSD и система быстро получала к ним доступ, а данные, которые используются редко и занимают много места — на обычном жестком диске HDD.
В сегодняшней статье мы рассмотрим как пользоваться StoreMI, как работает эта технология, а также как всё настроить.
Что такое AMD StoreMI?
Это не какая нибудь хитрая технология, встроенная в материнские платы, а обычная программа, которую можно установить на компьютер. Она существовала и раньше Enmotus FuzeDrive. Потом ребята из AMD договорились с разработчиками этой программы и выпустили свою версию под названием AMD StoreMI. Она позволяет использовать пустой SSD диск в качестве кэша для HDD диска, что делает работу последнего быстрее.
В последнее время ситуация вокруг этой технологии странная. В апреле 2020 года в AMD заявили, что поддерживать StoreMI в том виде, в каком она есть не будут и удалили ссылку на загрузку программы с сайта. Они собирались выпустить боле продвинутую технологию к концу года, а старую рекомендовали не использовать. Но уже в июле появилась AMD StoreMI 2.0, которая доступна только для материнских плат на чипсетах X570 и B550. Таким образом владельцы плат на чипсетах B450 и X470 получили эту технологию только на два года, а теперь остались не у дел. Конечно, всё ещё можно скачать и установить старую версию на сторонних ресурсах, но почему AMD не предоставила доступ к новой версии не понятно, так как никакие особенности новых чипсетов на работу программы не влияют. Вернее оно, кончено, понятно почему, но осознавать это неприятно.
Установка AMD StoreMI
Если вы счастливый обладатель материнской платы на базе чипсета X570 или B550, то можете скачать новую версию программы на официальном сайте. Все же остальные, и в том числе я, будем загружать последнюю доступную версию программы с Softpedia. Это версия 1.5.3. Это вполне серьезный ресурс и ему можно доверять.
После завершения загрузки установщика запустите его и выполните несколько шагов мастера установки. Там можно всё оставлять по умолчанию, поэтому я не буду подробно их описывать:
После завершения установки перезапустите компьютер:
Как пользоваться AMD StoreMI
1. Подготовка быстрого диска
Программа может сделать кэш только на полностью пустом диске. Это сделано для того, чтобы вы случайно не стёрли важные данные. Найдите значок Этот компьютер, кликните по нему правой кнопкой мыши и выберите Управление. В открывшемся окне выберите Менеджер дисков:
Здесь найдите нужный диск и удалите с него всё разделы. Для этого кликайте по каждому разделу правой кнопкой и выбирайте Удалить том. Весь диск должен быть неразмеченным. На снимке экрана это диск 0.
2. Запуск
Запустите программу с ярлыка на рабочем столе или из главного меню:
Дождитесь окончания загрузки:
3. Начало работы
Для оптимизации работы HDD диска или более медленного SSD диска надо нажать кнопку Create Tier:
Подтвердите, что надо создать кэш для диска, с которого была загружена Windows:
Утилита предупредит, что эта технология была протестирована с множеством программ, но всё же она может вызвать проблемы, соглашайтесь:
4. Выбор дисков
Отметьте галочкой медленный диск (Slow) на котором сейчас работает Windows и быстрый диск (Fast) на котором будет размещаться кэш:
Затем нажмите кнопку Next. Затем подтвердите действие.
5. Трансформация
Дождитесь завершения трансформации:
Затем перезагрузите компьютер:
6. Готово
После перезагрузки утилита покажет, что кэш настроен и вы можете изменить его параметры:
Теперь диски связанны и в Менеджере дисков они отображаются как один большой диск.
7. Кэш в оперативной памяти
Кроме того, вы можете создать кэш диска в оперативной памяти. Для этого кликните по пункту Create RAM Cache:
Затем выберите нужный размер кэша и нажмите Create. Чтобы удалить кэш из памяти выберите RAM Cache Off соответственно.
8. Удаление дополнительного раздела
Удалить программу намного сложнее чем установить. Поскольку виртуальный объедененный диск теперь загрузочный, вы не можете просто его убрать. Для этого надо сделать его не загрузочным, а для этого понадобится ещё одна установленная система Windows. Сначала надо исключить быстрый диск из кэша, для этого откройте программу выберите Change Tier Settings, а затем выберите ваш диск и опцию Move all data to slow drive.
После этого виртуальный диск будет состоять только из одного диска, а второй будет свободен и на этот второй вы можете клонировать текущую систему Windows или установить новую. Далее надо загрузится в эту систему, запустить там AMD StoreMI, выбрать Change Tier Settings, выбрать ваш виртуальный диск и опцию Delete Tier:
После этого виртуальный диск будет удалён и вы сможете пользоваться своей системой как раньше.
Выводы
Теперь вы знаете как пользоваться AMD StoreMI. Хочу отметить, что чисто удалить эту программу у меня так и не удалось. Диск на котором был создан кэш остался не читаемым после удаления и все данные, которые там были были утеряны. Возможно это баг, а возможно так и было задумано, поэтому имейте в виду, что если вы устанавливаете эту программу, то удалить её будет сложно. Если у вас уже есть установленный параллельно на том же диске дистрибутив Linux, то он тоже будет полностью удален.
Оцените статью:
(2 оценок, среднее: 3,00 из 5)
Загрузка…
Об авторе
Администратор te4h.ru, интересуюсь новыми технологиями, криптовалютой, искусственным интеллектом, свободным программным обеспечением и Linux.