Amdsserv exe системная ошибка opencl dll

Следует отметить, что несмотря на общее негативное мнение пользователей (определённого сегмента) относительно «забагованности» операционной системы Windows 10, разработчики из компании Microsoft всё-таки сделали более стабильную систему, нежели всеми любимая Windows 7. Это мнение основано на уже продолжительном опыте работы с десятой версии на разных компьютерах на разной конфигурации и с различными «стресс-тестами». Но даже с наличием более проработанных инструментов «доставки» и установки файлов обновлений в работе операционной системы Windows 10 всё ещё встречается множество ошибок, большая часть которых связана с некорректной работой драйверного обеспечения и с нарушением целостности файлов динамической библиотеки компоновки. В том числе это распространяется и на тему настоящей статьи, где разбору подлежит ошибка с утверждением об отсутствии файла «OpenCL.dll». В чём причина возникновения данной ошибки? А главное — каким образом её можно решить? Обо всём этом и пойдёт речь далее.

Диагноз и лечение

Начать стоит с того, что, как уже было неоднократно подтверждено, представители данной библиотеки крайне предрасположены к негативному воздействию, даже в большей степени нежели «sys»-объекты (драйверы). Например, на корректность работы данных системных компонентов могут оказывать:

• Пользователем проводились какие-либо манипуляции с системными файлами (например, с реестром).
• Деятельность вирусного программного обеспечения.
• Незавершённость скачивания и установки обновлений для Windows и многое другое.

Наименование файла прямо говорит о его функционале. «OpenCL» — это фреймворк (то есть заготовка или шаблон) для написания программного обеспечения с определённой структурой. В рамках статьи нюансы структуры данного ПО не носят ключевого значения, поэтому и останавливаться на этом более подробно не стоит. Следует лишь выделить немного другую интерпретацию выполняемого им функционала. Заключается она в том, что данная технология необходима для реализации процессов с одновременным применением центрального и графического процессора.

Как исправить ошибку

Если вы в поисках решений посещали иные ресурсы в интернете, то с большой долей вероятности встречали такой совет как: «Ручное скачивание «OpenCL.dll» и его ручное помещение в системный каталог или самостоятельная регистрация». При этом приводится множество ссылок на якобы «безопасные» сайты/каталоги/библиотеки, где «dll» можно скачать абсолютно бесплатно и без вирусного ПО внутри. Не стоит утверждать, что они однозначно не правы, но только необходимо учитывать, что представители библиотеки динамической компоновки часто используются для сокрытия в их структуре вирусного программного обеспечения. А если вы скачали подобный объект с сюрпризом внутри, и тем более поместили его в раздел диска, где установлена «Windows», то сами постелили красную дорожку для заражения вирусом собственного компьютера. Необходимо понимать, что на пустом месте ничего не происходит. Возникновению любой ошибки предшествует определённая последовательность каких-либо действий. И именно из этого аспекта следует отталкиваться в поисках решения проблем.

1. Первое, что необходимо сделать (особенно для владельцев видеокарт от Nvidia и AMD), – это провести проверку на актуальность драйверов видеокарты. Для проверки лучше использовать официальные ресурсы разработчиков и скачивать драйверы только с проверенных источников.
2. Если обновление/переустановка драйверов результатов не дали, то попробуйте предварительно полностью удалить старую версию (можно воспользоваться утилитой «Display Driver Uninstaller») и повторно установите новую.
3. Если проблема возникла в игре или в приложении, то особое внимание стоит уделить источнику, который использовался для их установки. Например, смените автора репака, попробуйте воспользоваться другим установочным файлов, в том числе скачайте его/их с официального сайта разработчиков. В том числе на время установки ПО (игры) отключите антивирус.
4. Проверьте целостность системных компонентов, для этого:
   • Нажмите «WIN+S» и введите «cmd.exe».
   • Кликните правой кнопкой мышки и выберите «Запуск от имени администратора».
   • Введите и выполните команду «sfc/scannow».
   • Дождитесь завершения и вывода результатов сканирования.
5. Откройте раздел «Параметры» — «Обновление и безопасность» и нажмите на кнопку «Проверить наличие обновлений» (Check for updates).

Установите все критические обновления, так как уже неоднократно было сказано, что с появлением «Windows 10» большая часть обязанностей по поддержанию актуальности драйверов была делегирована «Центру обновления».

Заключение

Только после применения вышеизложенных рекомендаций (соответственно, если ошибка так и осталась нерешённой) можно (на свой страх и риск) попробовать скачать «OpenCL.dll» и поместить его в директорию вручную. Но все возможные негативные последствия придётся решать вам! Поэтому лучшим вариантом будет всё своё внимание уделить комплексной проверке Windows.

Although Windows 10 is becoming the most popular Windows on the market, it still has occasional bugs. Speaking of bugs, users have reported problems with opencl.dll in Windows 10, and today we’ll try to fix that.

How to Fix Opencl.dll Problems in Windows 10

Opencl.dll is an important file, and if this file is missing, you might encounter various issues. Speaking of issues, here are some problems reported by users:

• Opencl.dll missing Windows 10, 8, 7 – According to users, this issue can appear on any version of Windows, but you should be able to fix the problem by using one of our solutions.
• Opencl.dll corrupt – Sometimes this file can get corrupted, but you might be able to fix the problem simply by using the Windows 10 ISO file and DISM command.
• Opencl.dll missing from your computer – If this file is missing from your PC, you might not be able to run certain applications, but you can always copy the file from another PC.
• Opencl.dll missing AMD – According to users, this problem can appear due to your graphics card drivers, and to fix the problem you just need to update your drivers to the latest version.
• Opencl.dll cannot be found – Sometimes the necessary files might not be found, but you should be able to fix the problem simply by installing the latest Windows updates.

Solution 1 – Update your graphics card drives

As we already mentioned, opencl.dll is related to your graphics card, so it wise to check for latest driver updates. To do this, go to your graphics card manufacturer’s website and find your graphics card model. Check for the latest drivers and install them. After the latest drivers have been installed check if the issue has been resolved.

You can manually update your graphic card drivers through Device Manager from Display adapters. Select the drivers you need and right-click to Update your drivers. After the updating process is finished restart your PC.

We also recommend a third-party tool (100% safe and tested by us) to automatically download all the outdated drivers on your PC.

To make sure that everything goes smoothly and avoid any kind of GPU driver errors, be sure to use a complete driver update assistant that will solve your problems with just a couple of clicks, and we strongly recommend DriverFix. Follow these easy steps to safely update your drivers:

1. Download and install DriverFix.
2. Launch the software.
3. Wait for DriverFix to detect all your faulty drivers.
4. The application will now show you all the drivers that have issues, and you just need to select the ones you’d liked fixed.
5. Wait for the app to download and install the newest drivers.
6. Restart your PC for the changes to take effect.

DriverFix

Keep you GPU on the peaks of their performance without worrying about its drivers.

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

---

• READ ALSO: How to fix mfc100.dll errors on Windows 10, 8.1

Solution 2 – Use Windows Image File

In order to do this, you’ll need to have Windows 10 ISO of the exact build that you have installed. We have to mention that this solution is a bit more advanced, so if you don’t know how to do it, maybe it’s best to contact an expert.

1. Mount the ISO image.
2. Run Command Prompt as admin.
3. Create a temporary directory to mount Windows Image File using the following command:
   • mkdir C:WIM
4. Mount the WIM file:
   • Dism /Mount-Wim /WimFile:D:sourcesinstall.wim /index:1 /MountDir:C:WIM /ReadOnly
5. Run DISM:
6. Dism /Online /Cleanup-Image /RestoreHealth /Source:C:WIMWindows /LimitAccess
7. After the process is completed unmount the image and delete the folder created in Step 3:
   • Dism /Unmount-Wim /MountDir:C:WIM /Discard
   • rmdir C:WIM
8. Restart your computer.

Solution 3 – Copy the missing file

According to users, one way to deal with Opencl.dll problems is to copy the missing file manually. To do this, it’s usually best to copy the file manually from another PC.

To fix the problem, simply copy the file to C:WindowsSystem32 directory. If you’re using a 64-bit version of Windows, you need to copy the missing file to the C:WindowsSysWOW64 directory as well.

Before you copy these files, be sure to create a backup of original files, just in case. Once you overwrite the original files, you’ll need to register the new files. To do that, just do the following:

1. Press Windows Key + X to open Win + X menu. Now choose Command Prompt (Admin) or PowerShell (Admin).
   
2. Now enter regsvr32 opencl.dll command and press Enter.

After doing that, the problem with the DLL file should be resolved.

A couple of users reported that you can copy the file from another directory on your PC. According to users, the file is located in Nvidia drivers directory, and you just need to copy it by following these steps:

1. Go to C:Program FilesNVIDIA CorporationOpenCL directory. Locate OpenCL64.dll, right-click it and choose Copy from the menu.
2. Go to C:WINDOWSSystem32 directory, and paste the file there. Be sure to change its name from OpenCL64.dll to OpenCL.dll.

After doing that, the problem should be resolved and everything will start working again.

• READ ALSO: How to fix any DLL errors in Windows 10, 8, 8.1

Solution 4 – Download the latest OpenCL runtime package

If you’re having problems with Opencl.dll, you might be able to fix the problem simply by downloading the OpenCL runtime package. According to users, you can download OpenCL runtime right from Intel’s website.

Once the runtime is downloaded, run the setup file to install it. After everything is installed, the issue should be resolved.

Solution 5 – Uninstall your graphics card drivers and perform a DISM scan

According to users, Opencl.dll is related to your graphics card drivers, and in order to fix the problem, it’s advised that you uninstall your graphics card drivers and switch to the default drivers. To do that, just follow these steps:

1. Press Windows Key + X and choose Device Manager from the list.
   
2. Locate your graphics card driver, right-click it and choose Uninstall device.
   
3. Confirmation menu will now appear. If available, check Remove driver software for this device button. Now click the Uninstall button.
   
4. After removing the driver, click on Scan for hardware changes icon and your system will automatically install the missing drivers.
   

Alternatively, you can remove your drivers by using a third-party solution such as Display Driver Uninstaller. This is a freeware third-party tool that can remove any display driver along with all of its files from your PC.

Once you remove your driver, repeat the steps from Solution 2 to repair your system.

Solution 6 – Prevent the driver from automatically updating

According to users, in order to fix this problem you need to prevent your graphics card driver from updating automatically. If you have a graphics card driver already installed, be sure to uninstall it from Device Manager.

Now, you need to prevent Windows from automatically updating the driver. After doing that, download the latest driver from your graphics card manufacturer and install it. Once the driver is installed, the problem with opencl.dll will be completely resolved.

• READ ALSO: Full Fix: Autorun.dll errors in Windows 10, 8.1, 7

Solution 7 – Disable your dedicated graphics card

Opencl.dll issues are usually caused by your graphics card drivers, and if you can’t fix the problem, it’s advised that you temporarily disable your dedicated graphics card.

Keep in mind that this is just a workaround, and until the proper drivers are released, it’s advised to use an integrated graphics card. Your integrated graphics card might not be able to handle the latest games, but at least your PC will be stable so you can perform the most basic tasks without issues.

To disable your dedicated graphics card, be sure to check the graphics card software on your PC. Alternatively, you can disable your graphics card right from BIOS.

Solution 8 – Perform a DISM and SFC scans

Users found out which directory is causing problems with opencl.dll, and in order to fix the problem, you just need to run DISM and SFC scans. To do that, just follow these steps:

1. Mount Windows 10 ISO image.
2. Start Command Prompt as administrator and run the following commands:

• Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:sourcesinstall.esd1WindowsWinSxSwow64_microsoft-windows-r..xwddmdriver-wow64-c_31bf3856ad364e35_10.0.10586.0_none_3dae054b56911c22
• sfc /scannow

After doing that, the problem should be completely resolved.

Solution 9 – Install the latest updates

This can be just a Windows 10 bug, and like most Windows bugs, you can fix it with the latest updates. Microsoft is working hard to fix various Windows issues, and if you want to ensure that your system is bug-free, it’s advised to keep your system up to date.

By default, Windows 10 installs the missing updates automatically, but sometimes you might miss an update or two. However, you can always check for updates manually by doing the following:

1. Press Windows Key + I to open the Settings app.
2. Go to Update & Security section.
   
3. Click Check for updates button.
   

Windows will now check for available updates and download them automatically in the background. Once the updates are downloaded, restart your PC to install them and the issue should be completely resolved.

That’s about it, I hope this article helped you to solve the problems with Opencl.dll on your computer. To find out more about solving the problem with missing DLL files in Windows 10, check out this article.

If you have any comments, or questions, just write them down below.

READ ALSO:

• Full Fix: Rundll32.exe error in Windows 10, 8.1, 7
• FIX: “Gdi32full.dll is missing” (or was not found) error in Windows 10
• How to fix ‘Xinput1_3.dll is missing’ when launching a game or app
• How to fix System.Xml.ni.dll errors in Windows
• Fix the Xlive.dll error in Windows 10, 8.1 or 7

Although Windows 10 is becoming the most popular Windows on the market, it still has occasional bugs. Speaking of bugs, users have reported problems with opencl.dll in Windows 10, and today we’ll try to fix that.

How to Fix Opencl.dll Problems in Windows 10

Opencl.dll is an important file, and if this file is missing, you might encounter various issues. Speaking of issues, here are some problems reported by users:

• Opencl.dll missing Windows 10, 8, 7 – According to users, this issue can appear on any version of Windows, but you should be able to fix the problem by using one of our solutions.
• Opencl.dll corrupt – Sometimes this file can get corrupted, but you might be able to fix the problem simply by using the Windows 10 ISO file and DISM command.
• Opencl.dll missing from your computer – If this file is missing from your PC, you might not be able to run certain applications, but you can always copy the file from another PC.
• Opencl.dll missing AMD – According to users, this problem can appear due to your graphics card drivers, and to fix the problem you just need to update your drivers to the latest version.
• Opencl.dll cannot be found – Sometimes the necessary files might not be found, but you should be able to fix the problem simply by installing the latest Windows updates.

Solution 1 – Update your graphics card drives

As we already mentioned, opencl.dll is related to your graphics card, so it wise to check for latest driver updates. To do this, go to your graphics card manufacturer’s website and find your graphics card model. Check for the latest drivers and install them. After the latest drivers have been installed check if the issue has been resolved.

You can manually update your graphic card drivers through Device Manager from Display adapters. Select the drivers you need and right-click to Update your drivers. After the updating process is finished restart your PC.

We also recommend a third-party tool (100% safe and tested by us) to automatically download all the outdated drivers on your PC.

To make sure that everything goes smoothly and avoid any kind of GPU driver errors, be sure to use a complete driver update assistant that will solve your problems with just a couple of clicks, and we strongly recommend DriverFix. Follow these easy steps to safely update your drivers:

1. Download and install DriverFix.
2. Launch the software.
3. Wait for DriverFix to detect all your faulty drivers.
4. The application will now show you all the drivers that have issues, and you just need to select the ones you’d liked fixed.
5. Wait for the app to download and install the newest drivers.
6. Restart your PC for the changes to take effect.

DriverFix

Keep you GPU on the peaks of their performance without worrying about its drivers.

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

---

• READ ALSO: How to fix mfc100.dll errors on Windows 10, 8.1

Solution 2 – Use Windows Image File

In order to do this, you’ll need to have Windows 10 ISO of the exact build that you have installed. We have to mention that this solution is a bit more advanced, so if you don’t know how to do it, maybe it’s best to contact an expert.

1. Mount the ISO image.
2. Run Command Prompt as admin.
3. Create a temporary directory to mount Windows Image File using the following command:
   • mkdir C:WIM
4. Mount the WIM file:
   • Dism /Mount-Wim /WimFile:D:sourcesinstall.wim /index:1 /MountDir:C:WIM /ReadOnly
5. Run DISM:
6. Dism /Online /Cleanup-Image /RestoreHealth /Source:C:WIMWindows /LimitAccess
7. After the process is completed unmount the image and delete the folder created in Step 3:
   • Dism /Unmount-Wim /MountDir:C:WIM /Discard
   • rmdir C:WIM
8. Restart your computer.

Solution 3 – Copy the missing file

According to users, one way to deal with Opencl.dll problems is to copy the missing file manually. To do this, it’s usually best to copy the file manually from another PC.

To fix the problem, simply copy the file to C:WindowsSystem32 directory. If you’re using a 64-bit version of Windows, you need to copy the missing file to the C:WindowsSysWOW64 directory as well.

Before you copy these files, be sure to create a backup of original files, just in case. Once you overwrite the original files, you’ll need to register the new files. To do that, just do the following:

1. Press Windows Key + X to open Win + X menu. Now choose Command Prompt (Admin) or PowerShell (Admin).
   
2. Now enter regsvr32 opencl.dll command and press Enter.

After doing that, the problem with the DLL file should be resolved.

A couple of users reported that you can copy the file from another directory on your PC. According to users, the file is located in Nvidia drivers directory, and you just need to copy it by following these steps:

1. Go to C:Program FilesNVIDIA CorporationOpenCL directory. Locate OpenCL64.dll, right-click it and choose Copy from the menu.
2. Go to C:WINDOWSSystem32 directory, and paste the file there. Be sure to change its name from OpenCL64.dll to OpenCL.dll.

After doing that, the problem should be resolved and everything will start working again.

• READ ALSO: How to fix any DLL errors in Windows 10, 8, 8.1

Solution 4 – Download the latest OpenCL runtime package

If you’re having problems with Opencl.dll, you might be able to fix the problem simply by downloading the OpenCL runtime package. According to users, you can download OpenCL runtime right from Intel’s website.

Once the runtime is downloaded, run the setup file to install it. After everything is installed, the issue should be resolved.

Solution 5 – Uninstall your graphics card drivers and perform a DISM scan

According to users, Opencl.dll is related to your graphics card drivers, and in order to fix the problem, it’s advised that you uninstall your graphics card drivers and switch to the default drivers. To do that, just follow these steps:

1. Press Windows Key + X and choose Device Manager from the list.
   
2. Locate your graphics card driver, right-click it and choose Uninstall device.
   
3. Confirmation menu will now appear. If available, check Remove driver software for this device button. Now click the Uninstall button.
   
4. After removing the driver, click on Scan for hardware changes icon and your system will automatically install the missing drivers.
   

Alternatively, you can remove your drivers by using a third-party solution such as Display Driver Uninstaller. This is a freeware third-party tool that can remove any display driver along with all of its files from your PC.

Once you remove your driver, repeat the steps from Solution 2 to repair your system.

Solution 6 – Prevent the driver from automatically updating

According to users, in order to fix this problem you need to prevent your graphics card driver from updating automatically. If you have a graphics card driver already installed, be sure to uninstall it from Device Manager.

Now, you need to prevent Windows from automatically updating the driver. After doing that, download the latest driver from your graphics card manufacturer and install it. Once the driver is installed, the problem with opencl.dll will be completely resolved.

• READ ALSO: Full Fix: Autorun.dll errors in Windows 10, 8.1, 7

Solution 7 – Disable your dedicated graphics card

Opencl.dll issues are usually caused by your graphics card drivers, and if you can’t fix the problem, it’s advised that you temporarily disable your dedicated graphics card.

Keep in mind that this is just a workaround, and until the proper drivers are released, it’s advised to use an integrated graphics card. Your integrated graphics card might not be able to handle the latest games, but at least your PC will be stable so you can perform the most basic tasks without issues.

To disable your dedicated graphics card, be sure to check the graphics card software on your PC. Alternatively, you can disable your graphics card right from BIOS.

Solution 8 – Perform a DISM and SFC scans

Users found out which directory is causing problems with opencl.dll, and in order to fix the problem, you just need to run DISM and SFC scans. To do that, just follow these steps:

1. Mount Windows 10 ISO image.
2. Start Command Prompt as administrator and run the following commands:

• Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:sourcesinstall.esd1WindowsWinSxSwow64_microsoft-windows-r..xwddmdriver-wow64-c_31bf3856ad364e35_10.0.10586.0_none_3dae054b56911c22
• sfc /scannow

After doing that, the problem should be completely resolved.

Solution 9 – Install the latest updates

This can be just a Windows 10 bug, and like most Windows bugs, you can fix it with the latest updates. Microsoft is working hard to fix various Windows issues, and if you want to ensure that your system is bug-free, it’s advised to keep your system up to date.

By default, Windows 10 installs the missing updates automatically, but sometimes you might miss an update or two. However, you can always check for updates manually by doing the following:

1. Press Windows Key + I to open the Settings app.
2. Go to Update & Security section.
   
3. Click Check for updates button.
   

Windows will now check for available updates and download them automatically in the background. Once the updates are downloaded, restart your PC to install them and the issue should be completely resolved.

That’s about it, I hope this article helped you to solve the problems with Opencl.dll on your computer. To find out more about solving the problem with missing DLL files in Windows 10, check out this article.

If you have any comments, or questions, just write them down below.

READ ALSO:

• Full Fix: Rundll32.exe error in Windows 10, 8.1, 7
• FIX: “Gdi32full.dll is missing” (or was not found) error in Windows 10
• How to fix ‘Xinput1_3.dll is missing’ when launching a game or app
• How to fix System.Xml.ni.dll errors in Windows
• Fix the Xlive.dll error in Windows 10, 8.1 or 7