An error occurred while running the manifest extension utility to sign the smtp data

Message could not be sent.Error: SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting #1674

i have problem with PHPmailer and get
Message could not be sent.Error: SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting

Debug output

The text was updated successfully, but these errors were encountered:

Please follow the link to the troubleshooting guide in the error message which gives details of how to diagnose this exact problem.

2019-02-28 12:00:46 Connection: opening to smtp.gmail.com:587, timeout=300, options=array()
2019-02-28 12:00:47 Connection failed. Error #2: stream_socket_client(): unable to connect to smtp.gmail.com:587 (Network is unreachable) [/home/marvemhc/public_html/lab2/PHPmailer/src/SMTP.php line 327]
2019-02-28 12:00:47 SMTP ERROR: Failed to connect to server: Network is unreachable (101)
SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting
2019-02-28 12:00:47 Connection: opening to smtp.gmail.com:587, timeout=300, options=array()
2019-02-28 12:00:48 Connection failed. Error #2: stream_socket_client(): unable to connect to smtp.gmail.com:587 (Network is unreachable) [/home/marvemhc/public_html/lab2/PHPmailer/src/SMTP.php line 327]
2019-02-28 12:00:48 SMTP ERROR: Failed to connect to server: Network is unreachable (101)
SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting
Message could not be sent.Error: SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting

Please follow the link to the troubleshooting guide in the error message which gives details of how to diagnose this exact problem.

if i disable this line , email will be send
«//$mail->isSMTP(); // Set mailer to use SMTP»

That means you’re not using SMTP. It looks like your ISP blocks you from using outbound SMTP, which is exactly what the guide says. When it says «network is unreachable» , it means it can’t reach your network for sending via SMTP. Bear in mind that while sending may «work», you’re likely to run into problems because you’re forging your from address.

Источник

I’m sending a mailing to about 1500 adresses using PHPMailer.
I have downloaded the latest version of PHPMailer.

The mailing starts fine, but after 50 adresses I get the following error for each new Send:
SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting

I’m not using SMTPKeepAlive.
This is my code that I repeat for each mail, executed at 2 seconds interval beween two mails:

What can be the problem ?

The text was updated successfully, but these errors were encountered:

Follow the link given in the error message and you might get some idea of where the problem lies. I’d guess that your ISP is imposing a limit on your send volume.

Thank for your response.
I contacted the ISP, and they found that two many SMTP connections were open at the same time.
Can I close each connection in my PHP code?

They now advise to use SMTPKeepAlive.

I’d suggest taking a look at the mailing list example provided with PHPMailer; stick a 2-second delay in the sending loop if you need to slow it down.

The SMTP connection will be closed automatically when the PHPMailer instance goes out of scope (or after message send is complete if you don’t enable keepalive), but you can close it manually by calling $mail->getSMTPInstance()->quit(); , though you should not need to.

require ‘PHPMailer/src/PHPMailerAutoload.php’;
use PHPMailerPHPMailerPHPMailer;
use PHPMailerPHPMailerException;
define(‘GUSER’, ‘falaksabbir3@gmail.com’); // GMail username
define(‘GPWD’, ‘password’);
define(‘SMTPUSER’, ‘falaksabbir3@gmail.com’); // sec. smtp username
define(‘SMTPPWD’, ‘password’); // sec. password
define(‘SMTPSERVER’, ‘smtp.gmail.com’); // sec. smtp server
function smtpmailer($to, $from, $from_name, $subject, $body, $is_gmail = true) <
global $error;
$mail = new PHPMailer();
$mail->IsSMTP();
$mail->SMTPAuth = true;
if ($is_gmail) <
$mail->SMTPSecure = ‘ssl’;
$mail->Host = ‘ssl://smtp.gmail.com’;
$mail->Port = 465;
$mail->Username = GUSER;
$mail->Password = GPWD;
> else <
$mail->Host = SMTPSERVER;
$mail->Username = SMTPUSER;
$mail->Password = SMTPPWD;
>
$mail->SetFrom($from, $from_name);
$mail->Subject = $subject;
$mail->Body = $body;
$mail->AddAddress($to);
if(!$mail->Send()) <
$error = ‘Mail error: ‘.$mail->ErrorInfo;
return false;
> else <
$error = ‘Message sent!’;
return true;
>
>
$msg = ‘Hello World’;
$subj = ‘test mail message’;
$to = ‘falak@oddly.co’;
$from = ‘falaksabbir3@gmail.com’;
$name = ‘Falak Sabbir’;

if (smtpmailer($to, $from, $name, $subj, $msg)) <
echo ‘Yippie, message send via Gmail’;
> else <
if (!smtpmailer($to, $from, $name, $subj, $msg, false)) <
if (!empty($error)) echo $error;
> else <
echo ‘Yep, the message is send (after doing some hard work)’;
>
>

This is my code. But it’s giving this error.
Mail error: SMTP connect() failed. https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting
How to fix this?

Read the troubleshooting guide the error links to, and don’t hijack unrelated, closed issues.

© 2023 GitHub, Inc.

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

Message could not be sent.Mailer Error: SMTP connect() failed. #469

hi, i’m new to php and i have been trying to send e-mail through php, phpmailer is the only class i find most recommended by most of the developers. i tried almost all solutions for my error. i cant find the fix. I have tried the link below, but didn’t get what to do, and googled for the solution, couldn’t find any, which works for me. tried almost all solutions, but it keeps showing me the same error.

tried the above link, as im new to php, im stuck.

fr all smtpdebug: 1,2,3,4, its giving same error. but php mail() function is working fine.

and our hosting provider says this.

We have the following list of ports open on our shared hosting plans:

HTTP/HTTPS — 80/443
GMail — 465/587/995/993
TOMCAT — 8080
SMTP/IMAP/POP — 25/143/110

here is the code im using. please help me to resolve the error. thanx in advance.

The text was updated successfully, but these errors were encountered:

That link should be https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting — I’m not sure where the «Available» came from. As the guide says, in pretty much every case this is nothing to do with PHPMailer, but the network config on your server or ISP. Setting SMTPDebug to anything higher than 0 should produce visible output, which you have not posted here. Most of the tests described in the guide require you to SSH into your server and run the commands from there.

The mail function may appear to work, but it’s not doing the same thing — it’s sending through your local mail server, not your Gmail account. You can do the same thing with PHPMailer by calling isMail instead of isSMTP .

thank you so much Synchro for your precious feedback .

isMail() working perfectly. but i dnt knw y isSMTP is still giving some error, which i dont understand at all
ERROR is:

Synchro sorry, i didnt mentioned that the bold values in error message, keeps on changing each time i refresh my page.

That bold value is just a link tracking ID, it will end up in the same place. So it just looks like your username or password is not correct.

That transcript looks like you have SMTPDebug = 1 ; try setting it to 2 and you should see more info.

dear synchro. thanks for your reply. but got some issues.

SMTPDebug = 3; // Enable verbose debug output $mail->isMail(); // Set mailer to use SMTP $mail->Host = ‘localhost’; // Specify main and backup SMTP servers $mail->SMTPAuth = true; // Enable SMTP authentication $mail->Username = ‘name@site.com’; // SMTP username $mail->Password = ‘password’; // SMTP password $mail->SMTPSecure = ‘tls’; // Enable TLS encryption, `ssl` also accepted $mail->Port = 587; // TCP port to connect to $mail->From = ‘name@site.com’; $mail->FromName = $name; //$mail->addAddress(‘joe@example.net’, ‘Joe User’); // Add a recipient $mail->addAddress(‘mame1@gmail.com’); // Name is optional //$mail->addAttachment(‘/var/tmp/file.tar.gz’); // Add attachments $mail->isHTML(true); // Set email format to HTML $mail->Subject = ‘SASP Contact Form’; $mail->Body = $message; $mail->Body .= «

Below are my contact details
Name: «; $mail->Body .= $name; $mail->Body .= «
My Phone number: «; $mail->Body .= $phone; $mail->Body .= »
My email address: «; $mail->Body .= $email; $mail->AltBody = ‘You are using basic web browser ‘; if(is_array($_FILES)) < $mail->AddAttachment($_FILES[‘attachment’][‘tmp_name’],$_FILES[‘attachment’][‘name’]); > if(!$mail->send()) < echo ‘Message could not be sent.’; echo ‘Mailer Error: ‘ . $mail->ErrorInfo; > else < //echo ‘Message has been sent’; header(‘Location: thankyou.html’); >?>»>

1. in the above code, when i send mail from isMail() function, its working perfectly wen the recipient mail is name@mysite.com. but if i change the recipient mail to, name@gmail.com, its shows. following error.

Message could not be sent.Mailer Error: Could not instantiate mail function.

Solve one problem at a time. Your code for handling attachments is wrong — look at the examples folder for how to do that properly, but solve your connection problem first.
If you’re getting messages like that using isMail(), look in your mail server log and check your PHP config.

thank u fr the replay..
but i’m clueless what i need to check in php config.
i m using shared hosting..

«Could not instantiate mail function» usually means you have no local mail server, so check that you have one. In your php.ini file you should have a setting for sendmail_path, and that program must exist. If you can’t change that, or it doesn’t exist, contact your hosting provider.

When you say «it’s working perfectly», do you mean that the script runs and you receive the sent message?

yes. when i use isMail(). i receive message perfectly. only when the recipient mail is name@mysite.com

but when i change the $mail->addAddress(‘name@mysite.com’); to $mail->addAddress(‘name@gmail.com’);.

with rest of the code untouched, i get «Could not instantiate mail function»

How about you read the docs the error message links you to?

IsSMTP(); $mail->Host = ‘smtp.gmail.com’; $mail->SMTPAuth = true; $mail->Username = ‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’; $mail->Password = ‘1234567890’; $mail->SMTPSecure = ‘tls’; $mail->Port=587; $mail->From = ‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’; $mail->FromName = ‘sonam’; $mail->addAddress(‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’, ‘shanu’); $mail->addReplyTo(‘sonamsingh.covetus@gmail’, ‘shanu’); $mail->WordWrap = 50; $mail->isHTML(true); $mail->Subject = ‘Using PHPMailer’; $mail->Body = ‘Hi Iam using PHPMailer library to sent SMTP mail from localhost’; if(!$mail->send()) < echo ‘Message could not be sent.’; echo ‘Mailer Error: ‘ . $mail->ErrorInfo; exit; > echo ‘Message has been sent’; /*require ‘PHPMailer-master/PHPMailerAutoload.php’; $mail = new PHPMailer; $mail->isSMTP(); $mail->Host = ‘smtp.gmail.com’; $mail->SMTPAuth = true; $mail->Username = ‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’; $mail->Password = ‘job2015@’; $mail->SMTPSecure = ‘ssl’; $mail->Port=465; $mail->SMTPDebug = 3; $mail->From = ‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’; $mail->FromName = ‘sonam singh’; $mail->addAddress(‘monika1990.agrawal@gmail.com mailto:monika1990.agrawal@gmail.com’); $mail->addReplyTo(‘sonamsingh.covetus@gmail.com mailto:sonamsingh.covetus@gmail.com’, ‘sonam singh’); $mail->WordWrap = 50; $mail->isHTML(true); $mail->Subject = ‘Using PHPMailer’; $mail->Body = ‘Hi Iam using PHPMailer library to sent SMTP mail from localhost’; if(!$mail->send()) < echo ‘Message could not be sent.’; echo ‘Mailer Error: ‘ . $mail->ErrorInfo; exit; > echo ‘Message has been sent’; */ ?>

—
Reply to this email directly or view it on GitHub #469 (comment).

Источник

An error occurred while trying to send the email smtp connect failed

Published on 2019-07-17· Updated on 2022-08-09

296 Upvotes | 34 comments

The author voluntarily contributed this tutorial as a part of Pepipost Write to Contribute program.

Introduction

Facing an error which says «PHPMailer SMTP Error: Could not connect to SMTP host»?

Let’s solve it together.

PHPMailer is one of the most popular open-source written in PHP for sending emails. While it’s easy to deploy and start sending emails, but there is a common error which most of us might be facing.

In this document, I have tried sharing the answer for some of the most occurring errors with the PHPMailer:

#Error: PHPMailer: SMTP Error: Could Not Connect To SMTP Host

Depending on your situation, there can be multiple reasons for the occurrence of this error. So, please try to go through the different scenarios below and pick the one which is closest to your use case.

Possible Problem 1: Problem With The Latest Version Of PHP

I tried using PHPMailer in many projects in the past and it worked buttery smooth. But, when I updated the PHP version to 5.6, I started getting an SMTP connection error. Later, I observed that this problem is there with the latest version of the PHP.

I noticed that in the newer version, PHP has implemented stricter SSL behaviour which has caused this problem.

Here is a help doc on PHPMailer wiki which has a section around this.

And, here is the quick workaround mentioned in the above wiki, which will help you fix this problem:

You can also change these settings globally, in the php.ini file but that’s a really bad idea because PHP has done these SSL level strictness for very good reasons only.

This solution should work fine with PHPMailer v5.2.10 and higher.

Possible Problem 2: Using Godaddy As The Hosting Provider

If you are running your code on Godaddy and trying to connect to some third-party SMTP provider like smtp.pepipost.com or smtp.sendgrid.com and getting some errors like this;

then nothing to really debug further, because it is because of a wried rule imposed by Godaddy on its user, where Godaddy has explicitly blocked the outgoing SMTP connection to ports 25, 587 and 465 to all external servers except for their own. Godaddy primarily wants their users to use their own SMTP instead of any third party SMTP, which is not at all an acceptable move for the developer community and many have has expressed their frustration in form of issues on StackOverflow too.

Your PHPmailer code might work perfectly fine on a local machine but the same code, when deployed on Godaddy server might not work and that’s all because of this silly rule implemented by Godaddy.

Here are few workarounds to avoid SMTP connection issues in Godaddy:

#1- Use Godaddy SMTP Instead Of Any Third Party:

In case you are sending 1-1 personalized emails, then using Godaddy SMTP makes sense. For that, just make the following changes in your PHPMailer code and you will be done;

Note: Godaddy also restricts using any free domains like gmail, yahoo, hotmail, outlook, live, aim or msn as sender domain/From address. This is mostly because these domains have their own SPF and DKIM policies and some one can really forg the from address if allowed without having custom SPF and DKIM.

But, in case you want to send bulk/emails at scale then it becomes a bottleneck with high chances of your emails been landed in spam and your domain/IP address getting blacklisted. In such a case, I would suggest checking your email blacklist status and going with an option no #2.

#2- Use Email APIs Instead Of Any SMTP:

Godaddy can block the outgoing SMTP ports but can’t really block the outgoing HTTP ports (80, 8080) 😀 So, I would recommend using some good third party email service provider who provides email APIs to send emails. Most of these providers have code libraries/SDKs like PHPMailer which you can install and include in your code to start sending emails. Unlike using Godaddy’s local SMTP, using email APIs will give you a better control on your email deliverability.

Possible Problem 3: Getting SMTP Connection Failure On A Shared Hosting Provider

If you are running your code on a shared hosting provider and trying to connect to some third-party SMTP provider like smtp.pepipost.com or smtp.sendgrid.com and getting some errors like this;

then, this is mostly because of the firewall rules on their infrastructure which explicitly blocks the outgoing SMTP connection to ports 25, 587 and 465 to all external servers. This rule is primarily to protect the infrastructure from sending spam, but also a really frustrating situation for developers like us.

The only solution to this is, same as I suggested above in the Godaddy section (Use Email APIs instead of any SMTP) or contact the hosting provider to allow connection to SMTP ports.

How to check whether your outgoing port (25, 587 or 465) is really blocked or not?

1. Trying doing telnet
Using telnet command you can actually test whether the port is opened or not.

If Port 25 is not blocked, you will get a successful 220 response (text may vary).

If Port 25 is blocked, you will get a connection error or no response at all.

2. Use outPorts
outPorts is a very good open-source on GitHub to which scans all your ports and gives the result.
Once outPorts is installed, you can type the following command in the terminal to check port 25 connectivity:
outPorts 25

Possible Problem 4: SELinux Blocking Issue

In case you are some error like the following:

then, the most probably your SELinux is preventing PHP or the webserver from sending emails.

This problem is mostly with Linux based machines like RedHat, Fedora, Centos, etc.

How to debug whether it’s really the SELinux issue which is blocking these SMTP connections?

You can use the getsebool command to check whether the httpd daemon is allowed to make an SMTP connection over the network to send an email.

This command will return a boolean on or off. If it’s disabled, then you will see an output like this;

getsebool: SELinux is disabled

We can turn it on using the following command:

If you are running your code on a shared hosting provider and trying to connect to some third-party SMTP provider like smtp.pepipost.com or smtp.sendgrid.com and getting some errors like this.

Possible Problem 5: PHPMailer SMTP Connection Failed Because Of SSL Support Issue With PHP

There are many popular cases for the failure of SMTP connection in PHPMailer and lack of SSL is one of that too.

There might be a case, that the Open SSL extension is not enabled in your php.ini which is creating the connection problem.

So, once you enable the extension=php_openssl.dll in the ini file.

Enable debug output, so that you can really see that SSL is the actual problem or not. PHPMailer gives a functionality by which you can get detailed logs of the SMTP connection.

You can enable this functionality by including the following code in your script;

By setting the value of SMTPDebug property to 2, you will be actually getting both server and client level transcripts.

For more details on the other parameter values, please refer the official PHPMailer Wiki.

In case you are using Godaddy hosting, then just enabling SSL might not fix your problem. Because there are other serious challenges with Godaddy which you can refer in the above godaddy section.

Possible Problem 6: PHPMailer Unable To Connect To SMTP Because Of The IPv6 Blocking Issue

There are some set of newer hosting companies which includes DigitalOcean provides IPv6 connectivity but explicitly blocks outgoing SMTP connections over IPv6 but allow the same over IPv4.

While this is not a major issue, because this can be workaround by setting the host property to an IPv4 address using the gethostbyname function.

Note: In this approach, you might face a certificate name check issue but that can be workaround by disabling the check, in SMTPOptions.
But, this is mostly an extreme case, most of the times it’s the port block issue by the provider, like DigitalOcean in this case.
So, it is important to first get confirmed whether the port is really unlocked or not, before digging further into the solution.

Possible Problem 7: Getting The Error «Could Not Instantiate Mail Function»

This issue happens primarily when your PHP installation is not configured correctly to call the mail() function. In this case, it is important to check the sendmail_path in your php.ini file. Ideally, your sendmail_path should point to the sendmail binary (usually the default path is /usr/sbin/sendmail).

Note: In case of Ubuntu/Debian OS, you might be having multiple .ini files (under the path /etc/php5/mods-available), so please ensure that you are making the changes at all the appropriate places.

If this configuration problem is not the case, then try further debugging and check whether you have a local mail server installed and configured properly or not. You can install any good mail server like Postfix.

Note: In case all of the above things are properly in place and you’re still getting this error of «Could not instantiate mail function», then try to see if you are getting more details of the error. If you see some message like «More than one from person» in the error message then it means that in php.ini the sendmail_path property already contains a from -f parameter and your code is also trying to add a second envelope from, which is actually not allowed.

What Is The Use Of IsSMTP()?

isSMTP() is been used when you want to tell PHPMailer class to use the custom SMTP configuration defined instead of the local mail server.

Here is a code snippet of how it looks like;

Many times developers get the below error:

If you’re constantly getting the above error message, then just try identifying the problem as stated in the above sections.

Grade My Email
Check your spam now?

Netcorecloud’s toolkit is the solution to all your email problems.

Источник

Same problem with 1.30.0.
Error:

bitwarden-identity | info: Microsoft.AspNetCore.Hosting.Internal.WebHost[1]
bitwarden-identity |       Request starting HTTP/1.0 POST http://URL/connect/token application/x-www-form-urlencoded; charset=utf-8 232
bitwarden-identity | info: Microsoft.AspNetCore.Cors.Infrastructure.CorsService[4]
bitwarden-identity |       Policy execution successful.
bitwarden-identity | info: IdentityServer4.Hosting.IdentityServerMiddleware[0]
bitwarden-identity |       Invoking IdentityServer endpoint: IdentityServer4.Endpoints.TokenEndpoint for /connect/token
bitwarden-identity | crit: IdentityServer4.Hosting.IdentityServerMiddleware[0]
bitwarden-identity |       Unhandled exception: An error occurred while attempting to establish an SSL or TLS connection.
bitwarden-identity |
bitwarden-identity |       The SSL certificate presented by the server is not trusted by the system for one or more of the following reasons:
bitwarden-identity |       1. The server is using a self-signed certificate which cannot be verified.
bitwarden-identity |       2. The local system is missing a Root or Intermediate certificate needed to verify the server's certificate.
bitwarden-identity |       3. The certificate presented by the server is expired or invalid.
bitwarden-identity |
bitwarden-identity |       See https://github.com/jstedfast/MailKit/blob/master/FAQ.md#InvalidSslCertificate for possible solutions.
bitwarden-identity | MailKit.Security.SslHandshakeException: An error occurred while attempting to establish an SSL or TLS connection.
bitwarden-identity |
bitwarden-identity | The SSL certificate presented by the server is not trusted by the system for one or more of the following reasons:
bitwarden-identity | 1. The server is using a self-signed certificate which cannot be verified.
bitwarden-identity | 2. The local system is missing a Root or Intermediate certificate needed to verify the server's certificate.
bitwarden-identity | 3. The certificate presented by the server is expired or invalid.
bitwarden-identity |
bitwarden-identity | See https://github.com/jstedfast/MailKit/blob/master/FAQ.md#InvalidSslCertificate for possible solutions. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
bitwarden-identity |    at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, ExceptionDispatchInfo exception)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.PartialFrameCallback(AsyncProtocolRequest asyncRequest)
bitwarden-identity | --- End of stack trace from previous location where exception was thrown ---
bitwarden-identity |    at System.Net.Security.SslState.ThrowIfExceptional()
bitwarden-identity |    at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
bitwarden-identity |    at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
bitwarden-identity |    at System.Net.Security.SslStream.EndAuthenticateAsClient(IAsyncResult asyncResult)
bitwarden-identity |    at System.Net.Security.SslStream.<>c.<AuthenticateAsClientAsync>b__46_2(IAsyncResult iar)
bitwarden-identity |    at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
bitwarden-identity | --- End of stack trace from previous location where exception was thrown ---
bitwarden-identity |    at MailKit.Net.Smtp.SmtpClient.ConnectAsync(String host, Int32 port, SecureSocketOptions options, Boolean doAsync, CancellationToken cancellationToken)
bitwarden-identity |    --- End of inner exception stack trace ---
bitwarden-identity |    at MailKit.Net.Smtp.SmtpClient.ConnectAsync(String host, Int32 port, SecureSocketOptions options, Boolean doAsync, CancellationToken cancellationToken)
bitwarden-identity |    at Bit.Core.Services.MailKitSmtpMailDeliveryService.SendEmailAsync(MailMessage message) in /home/appveyor/projects/core/src/Core/Services/Implementations/MailKitSmtpMailDeliveryService.cs:line 74
bitwarden-identity |    at Bit.Core.Services.HandlebarsMailService.SendTwoFactorEmailAsync(String email, String token) in /home/appveyor/projects/core/src/Core/Services/Implementations/HandlebarsMailService.cs:line 110
bitwarden-identity |    at Bit.Core.Services.UserService.SendTwoFactorEmailAsync(User user) in /home/appveyor/projects/core/src/Core/Services/Implementations/UserService.cs:line 299
bitwarden-identity |    at Bit.Core.IdentityServer.ResourceOwnerPasswordValidator.BuildTwoFactorResultAsync(User user, Organization organization, ResourceOwnerPasswordValidationContext context) in /home/appveyor/projects/core/src/Core/IdentityServer/ResourceOwnerPasswordValidator.cs:line 203
bitwarden-identity |    at Bit.Core.IdentityServer.ResourceOwnerPasswordValidator.ValidateAsync(ResourceOwnerPasswordValidationContext context) in /home/appveyor/projects/core/src/Core/IdentityServer/ResourceOwnerPasswordValidator.cs:line 90
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.ValidateResourceOwnerCredentialRequestAsync(NameValueCollection parameters)
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.RunValidationAsync(Func`2 validationFunc, NameValueCollection parameters)
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.ValidateRequestAsync(NameValueCollection parameters, ClientSecretValidationResult clientValidationResult)
bitwarden-identity |    at IdentityServer4.Endpoints.TokenEndpoint.ProcessTokenRequestAsync(HttpContext context)
bitwarden-identity |    at IdentityServer4.Endpoints.TokenEndpoint.ProcessAsync(HttpContext context)
bitwarden-identity |    at IdentityServer4.Hosting.IdentityServerMiddleware.Invoke(HttpContext context, IEndpointRouter router, IUserSession session, IEventService events)
bitwarden-identity | fail: Microsoft.AspNetCore.Server.Kestrel[13]
bitwarden-identity |       Connection id "0HLL8FJQQGDIC", Request id "0HLL8FJQQGDIC:00000001": An unhandled exception was thrown by the application.
bitwarden-identity | MailKit.Security.SslHandshakeException: An error occurred while attempting to establish an SSL or TLS connection.
bitwarden-identity |
bitwarden-identity | The SSL certificate presented by the server is not trusted by the system for one or more of the following reasons:
bitwarden-identity | 1. The server is using a self-signed certificate which cannot be verified.
bitwarden-identity | 2. The local system is missing a Root or Intermediate certificate needed to verify the server's certificate.
bitwarden-identity | 3. The certificate presented by the server is expired or invalid.
bitwarden-identity |
bitwarden-identity | See https://github.com/jstedfast/MailKit/blob/master/FAQ.md#InvalidSslCertificate for possible solutions. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
bitwarden-identity |    at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, ExceptionDispatchInfo exception)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
bitwarden-identity |    at System.Net.Security.SslState.PartialFrameCallback(AsyncProtocolRequest asyncRequest)
bitwarden-identity | --- End of stack trace from previous location where exception was thrown ---
bitwarden-identity |    at System.Net.Security.SslState.ThrowIfExceptional()
bitwarden-identity |    at System.Net.Security.SslState.InternalEndProcessAuthentication(LazyAsyncResult lazyResult)
bitwarden-identity |    at System.Net.Security.SslState.EndProcessAuthentication(IAsyncResult result)
bitwarden-identity |    at System.Net.Security.SslStream.EndAuthenticateAsClient(IAsyncResult asyncResult)
bitwarden-identity |    at System.Net.Security.SslStream.<>c.<AuthenticateAsClientAsync>b__46_2(IAsyncResult iar)
bitwarden-identity |    at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
bitwarden-identity | --- End of stack trace from previous location where exception was thrown ---
bitwarden-identity |    at MailKit.Net.Smtp.SmtpClient.ConnectAsync(String host, Int32 port, SecureSocketOptions options, Boolean doAsync, CancellationToken cancellationToken)
bitwarden-identity |    --- End of inner exception stack trace ---
bitwarden-identity |    at MailKit.Net.Smtp.SmtpClient.ConnectAsync(String host, Int32 port, SecureSocketOptions options, Boolean doAsync, CancellationToken cancellationToken)
bitwarden-identity |    at Bit.Core.Services.MailKitSmtpMailDeliveryService.SendEmailAsync(MailMessage message) in /home/appveyor/projects/core/src/Core/Services/Implementations/MailKitSmtpMailDeliveryService.cs:line 74
bitwarden-identity |    at Bit.Core.Services.HandlebarsMailService.SendTwoFactorEmailAsync(String email, String token) in /home/appveyor/projects/core/src/Core/Services/Implementations/HandlebarsMailService.cs:line 110
bitwarden-identity |    at Bit.Core.Services.UserService.SendTwoFactorEmailAsync(User user) in /home/appveyor/projects/core/src/Core/Services/Implementations/UserService.cs:line 299
bitwarden-identity |    at Bit.Core.IdentityServer.ResourceOwnerPasswordValidator.BuildTwoFactorResultAsync(User user, Organization organization, ResourceOwnerPasswordValidationContext context) in /home/appveyor/projects/core/src/Core/IdentityServer/ResourceOwnerPasswordValidator.cs:line 203
bitwarden-identity |    at Bit.Core.IdentityServer.ResourceOwnerPasswordValidator.ValidateAsync(ResourceOwnerPasswordValidationContext context) in /home/appveyor/projects/core/src/Core/IdentityServer/ResourceOwnerPasswordValidator.cs:line 90
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.ValidateResourceOwnerCredentialRequestAsync(NameValueCollection parameters)
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.RunValidationAsync(Func`2 validationFunc, NameValueCollection parameters)
bitwarden-identity |    at IdentityServer4.Validation.TokenRequestValidator.ValidateRequestAsync(NameValueCollection parameters, ClientSecretValidationResult clientValidationResult)
bitwarden-identity |    at IdentityServer4.Endpoints.TokenEndpoint.ProcessTokenRequestAsync(HttpContext context)
bitwarden-identity |    at IdentityServer4.Endpoints.TokenEndpoint.ProcessAsync(HttpContext context)
bitwarden-identity |    at IdentityServer4.Hosting.IdentityServerMiddleware.Invoke(HttpContext context, IEndpointRouter router, IUserSession session, IEventService events)
bitwarden-identity |    at IdentityServer4.Hosting.IdentityServerMiddleware.Invoke(HttpContext context, IEndpointRouter router, IUserSession session, IEventService events)
bitwarden-identity |    at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context)
bitwarden-identity |    at Microsoft.AspNetCore.Cors.Infrastructure.CorsMiddleware.Invoke(HttpContext context)
bitwarden-identity |    at IdentityServer4.Hosting.BaseUrlMiddleware.Invoke(HttpContext context)
bitwarden-identity |    at Bit.Core.Utilities.CurrentContextMiddleware.Invoke(HttpContext httpContext, CurrentContext currentContext, GlobalSettings globalSettings) in /home/appveyor/projects/core/src/Core/Utilities/CurrentContextMiddleware.cs:line 18
bitwarden-identity |    at Bit.Core.Utilities.ServiceCollectionExtensions.<>c.<<UseDefaultMiddleware>b__10_0>d.MoveNext() in /home/appveyor/projects/core/src/Core/Utilities/ServiceCollectionExtensions.cs:line 383
bitwarden-identity | --- End of stack trace from previous location where exception was thrown ---
bitwarden-identity |    at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.Http.HttpProtocol.ProcessRequests[TContext](IHttpApplication`1 application)
bitwarden-identity | info: Microsoft.AspNetCore.Hosting.Internal.WebHost[2]
bitwarden-identity |       Request finished in 96.5517ms 500

khokhryakov1984	#1 Оставлено : 18 апреля 2013 г. 13:52:29(UTC)
Статус: Новичок Группы: Участники Зарегистрирован: 07.04.2013(UTC) Сообщений: 9	Добрый день, столкнулся с такой проблемой требуется подписывать и шифровать файл, далее отправлять по электронной почте решено использовать для этого eутилиту csptest делаю следующее: csptest.exe -sfsign -sign -in «a.tmp» -out «xxx.pem» -my myCert ключевой носитель есть и в локальном компьютере в реестре, так и в реестре администратора но вот почему то когда запускаю под администратором то все проходит удачно, а когда под system то выдает следующее: CSP (Type:75) v3.6.5359 KC1 Release Ver:3.6.6497 OS:Windows CPU:AMD64 FastCode:NoHardwareSupport. An error occurred in running the program. .tmain.c:2467:CertFindCertificateInStore Error number 0x80092004 (2148081668). Cannot find object or property. An error occurred in running the program. .signtsf.c:283:Cannot find User certificate: -рєё Error number 0x80092004 (2148081668). Cannot find object or property. Total: SYS: 0,031 sec USR: 0,016 sec UTC: 0,078 sec [ErrorCode: 0x00000001] CSP (Type:75) v3.6.5359 KC1 Release Ver:3.6.6497 OS:Windows CPU:AMD64 FastCode:NoHardwareSupport. An error occurred in running the program. .tmain.c:2467:CertFindCertificateInStore Error number 0x80092004 (2148081668). Cannot find object or property. An error occurred in running the program. .signtsf.c:283:Cannot find User certificate: -рєё Error number 0x80092004 (2148081668). Cannot find object or property. Total: SYS: 0,031 sec USR: 0,016 sec UTC: 0,046 sec [ErrorCode: 0x00000001] Прошу помочь разобраться

Kirill Sobolev	#2 Оставлено : 18 апреля 2013 г. 14:05:32(UTC)
Статус: Сотрудник Группы: Участники Зарегистрирован: 25.12.2007(UTC) Сообщений: 1,732 Откуда: КРИПТО-ПРО Поблагодарили: 177 раз в 168 постах
Техническую поддержку оказываем тут Наша база знаний
	WWW

khokhryakov1984	#3 Оставлено : 18 апреля 2013 г. 15:30:22(UTC)
Статус: Новичок Группы: Участники Зарегистрирован: 07.04.2013(UTC) Сообщений: 9	спасибо, год бы наверное искал

Быстрый переход
 

Вы не можете создавать новые темы в этом форуме.

Вы не можете отвечать в этом форуме.

Вы не можете удалять Ваши сообщения в этом форуме.

Вы не можете редактировать Ваши сообщения в этом форуме.

Вы не можете создавать опросы в этом форуме.

Вы не можете голосовать в этом форуме.