An error was encountered while modifying the quorum settings

Hi,

Node1 and Node2. I have setup 2 Node AlawaysOn Availability Group in SQL Server 2012. Current Quorum Configuration is «Node Majority».  As i read for 2 Node Quorum Configuration should be file share witness.

http://blogs.technet.com/b/canitpro/archive/2013/08/20/step-by-step-creating-a-sql-server-2012-alwayson-availability-group.aspx

I have created a shared folder on Node1 \Node1SQLFILESHARE.

When i try to configure file share and give share address as \Node1SQLFILESHARE  then it fail with following error.

 

Share:  \Node1SQLFILESHARE
Quorum Configuration:  Node and File Share Majority
Cluster Managed Voting:  Enabled

Your cluster quorum configuration will be changed to the configuration shown above.
An error was encountered while modifying the quorum settings.
Your cluster quorum settings have not been changed.
There was an error configuring the file share witness ‘\Node1SQLFILESHARE’.
Unable to save property changes for ‘File Share Witness’.
The system cannot find the path specified

Pls guide what is the issue and how to fix it. What is recommended Quorum Configuration for 2 Node.

thx

---

iffi

Hi

I want to setup HA

In first step, Befor create cluster , I validate the clustring and get some warning.

As regards, I want to use Listener and Enable AutoFailour (to change automatic primary server) , Need to Investigate All errors careFully

Befor That This is my disks: (Both servers are Virtual machines)

Server A :

— Disk 1 — Drive C

— Disk 1 — Drive D

— Disk 2 — Drive E (This is not Boot Drive)

Server B :

— Disk 1 — Drive C

— Disk 1 — Drive D

— Disk 2 — Drive E (This is not Boot Drive)

First Important warning :

<<<List Disks To Be Validated>>>

>>>>>>>>>>>> No disks were found on which to perform cluster validation tests. To correct this, review the following possible causes: <<<<<<<<<<<<<<

* The disks are already clustered and currently Online in the cluster. When testing a working cluster, ensure that the disks that you want to test are Offline in the cluster.

— I think this is not reason For this warning.

* The disks are unsuitable for clustering. Boot volumes, system volumes, disks used for paging or dump files, etc., are examples of disks unsuitable for clustering.

— I think this is not reason For this warning.

* Review the «List Disks» test. Ensure that the disks you want to test are unmasked, that is, your masking or zoning does not prevent access to the disks. If the disks seem to be unmasked or zoned correctly but could not be tested, try restarting the servers before running the validation tests again.

* The cluster does not use shared storage. A cluster must use a hardware solution based either on shared storage or on replication between nodes. If your solution is based on replication between nodes, you do not need to rerun Storage tests. Instead, work with the provider of your replication solution to ensure that replicated copies of the cluster configuration database can be maintained across the nodes.

* The disks are Online in the cluster and are in maintenance mode.

No disks were found on which to perform cluster validation tests.

—————————————————————-

—————————————————————-

For more information This Disk List report :

Server A : Disk 1

Model : VMware Virtual disk SCSI Disk Device

Bus Type :SAS

Adapter : LSI Adapter, SAS 3000 series, 8-port with 1068

Disk Characteristics : Disk is a boot volume. Disk is a system volume. Disk is used for paging files. Disk is used for memory dump files. Disk is on the system bus. Disk partition style is MBR. Disk type is BASIC.

Server A : Disk 2 (This disk seems to be for Cluster)

Model : VMware Virtual disk SCSI Disk Device

Bus Type :SAS

Adapter : LSI Adapter, SAS 3000 series, 8-port with 1068

Disk Characteristics : Disk is on the system bus. Disk partition style is MBR. Disk type is DYNAMIC.

——————————-

For more information This Disk List report :

Server B : Disk 1

Model : VMware Virtual disk SCSI Disk Device

Bus Type :SAS

Adapter : LSI Adapter, SAS 3000 series, 8-port with 1068

Disk Characteristics : Disk is a boot volume. Disk is a system volume. Disk is used for paging files. Disk is used for memory dump files. Disk is on the system bus. Disk partition style is MBR. Disk type is BASIC.

Server B : Disk 2 (This disk seems to be for Cluster)

Model : VMware Virtual disk SCSI Disk Device

Bus Type :SAS

Adapter : LSI Adapter, SAS 3000 series, 8-port with 1068

Disk Characteristics : Disk is on the system bus. Disk partition style is MBR. Disk type is DYNAMIC.

——————————————————————————————————————

——————————————————————————————————————

I changed Disk 2 type to GPT Disk , But nothing chenged. and message changed to this :

>>>>>>>>>>>>>>>Disk is on the system bus. Disk partition style is GPT. Disk type is BASIC.

Still working this one…

I have Exchange 2007 running on Windows 2008 network. I created the cluster and am trying to change the quorum settings to point to a share on my Hub Transport server.

I am following the guidelines posted at msexchange site along with Henrick Walthers book Configuring Exchange 2007.

Here is the error I am getting:

An error was encountered while modifying the quorum settings. There was an error configuring the file share witness ‘\PKW-EXC-HTfsm_dir_pkwexchange’. Your cluster quorum settings have not been changed. There was an error configuring the file share witness ‘\PKW-EXC-HTfsm_dir_pkwexchange’. Your cluster quorum settings have not been changed. Unable to save property changes for ‘File Share Witness (\PKW-EXC-HTfsm_dir_pkwexchange)’. Access is denied.

I understand there is a permissions issue. The service account for the cluster was created in AD and given the permissions for both administratorlocal and Exchange Organization Administrators.

If I run the command line: net share blah blah blah I receive an error 1322 ‘No mapping between account names and security IDs was done.

Thanks for your help,

Dan

Ember

«its says unable to create save file»
Does the Ember game menu tell you this, or your OS? Post a picture of the error and I’m sure the DEV can help out.

«its says unable to create save file»
Does the Ember game menu tell you this, or your OS? Post a picture of the error and I’m sure the DEV can help out.

how can i post a screenshot??

On steam client hover over your name, select content from drop down menu, open screenshot you want to post, copy the url to your post and voila:

how can i post a screenshot??

On steam client hover over your name, select content from drop down menu, open screenshot you want to post, copy the url to your post and voila:

i think this cloud onedrive is from the steam how do i cancel it? and why i cant disable the wrting only folder even that i use my administretor

Onedrive is not from Steam: https://onedrive.live.com is from Microsoft. You’ll need to read about it and then disable that service. It’s obviously using regional chars in your path that the game don’t like and can’t find the right folder.

As others said before, you need to give us more info for us to be able to help you. For instance, if you are using Windows 8.1 or 10, then onedrive comes with the system (and cannot be uninstalled) so you’ll have to disable cloud sync to see if that helps you.

Just follow the link and disable onedrive.

Or, also, try to add to the Ember exe compatibility options to start as administrator (just in case) You don’t need to worry about read-only permissions in that folder because it is system controlled and you cannot do anything about that. Use app compatibility options always to add permissions to your apps.

New windows are horrible lol

Edit: there is no support for this game? I have seen a lot of threads asking for support (also for save problems) and there is no answer from dev or from 505 CM (i thought 505 CM was in all the game’s forum that they distribute, maybe i’m wrong)

Источник

Рассмотрено Ошибка создании папки

Администрация никогда не пришлет Вам ссылку на авторизацию и не запросит Ваши данные для входа в игру.

Charlie_Mails

Новичок

Shane Diesel

Следящий за Тех. Разделом

Здравствуйте
Что-либо на Вашем ПК мешает работе RAGE, как правило это стороннее антивирусное ПО

Попробуйте общие решения:
Перед запуском RAGEMP, закрывайте максимум приложений, которые могут нагружать ПК и использовать соединение

Начните с пунктов 1, 4

Установите чистую GTAV без модификаций, если использовали модификации, но сначала сделайте полную проверку файлов GTAV, удалив перед эти update.rpf, в папке Update, внутри папки с GTAV

Последние поддерживаемые версии Visual C++ для скачивания

В настройках брандмауэра Windows, удалите все правила для входящих и исходящих подключений, далее отключите его
1. Нажмите по кнопке Пуск и в поисковой панели начните набирать «Командная строка»
2. Запустите классическое приложение с правами администратора (щёлкните по нему правой кнопкой мыши)
3. В открывшемся окне вводим команду netsh advfirewall set allprofiles state off и нажимаем Enter
4. После этого Вы увидите уведомление из Центра безопасности и обслуживания об отключении системы безопасности
Перезагрузите ПК, выключите роутер на пару минут

Запустите по очереди, не закрывая предыдущие, следующие приложения: Steam или EGS, лаунчер (Gta 5 Launcher) или мультиплеер (RAGEMP) от имени администратора

Если ничего не помогает, воспользуйтесь адекватным VPN (Nordvpn, Cyberghost)

Источник

Unable to create local save folder что делать

An error was encountered while modifying the quorum settings.
Your cluster quorum settings have not been changed.

There was an error configuring the file share witness ‘\nassrvsql’.

Unable to save property changes for ‘File Share Witness’.

The user name or password is incorrect

Putting into considerations that the cluster hosts computer accounts have a full control permissions over the shared folder, also the Custer Virtual Object.

The shared folder on a separate host that can be accessed by the cluster hosts.

All replies

Have you tried to with another share folder?

Tyr to create a new share folder and configure the witness.

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

>>I’ve tried it at Fujitsu NAS Storage but it didn’t work, I’ve tried it on another Windows Server that’s not part of the cluster and it didn’t work too.

Are you getting the same error that you posted?

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

Don’t directly create a share folder.

1. Select Configure Cluster Quorum Settings
2. Select Next until you come to the Browse option.
3. Now, type \ServerName in the Browse bar.
4. Click Show Shared Folders.
5. Click Create New Share Folder and enter a name and select the drive where you want the quorum to be.
6. Then, select the type of folder. I would prefer, Full Access and Full Read/Write access to the users.
7. Click OK and close the configuration. This should work.

When you go to this Share Folder and check its properties, you can witness the cluster name in the Security tab without any types of permission. Let’s say, if your cluster name is Mohamed, it will be listed as Mohamed$.

This should work fine.

Or, you can create a manual share folder and add the Cluster Name to the Security tab in the Properties. And, make sure that the Domain Users are there in it.

Источник

VScode unable to save files inside my WSL2 home folder

I’m trying to make WSL2 work for my web projects development and this is driving me crazy!

Basically, i have two options. 1. Save my project files into c drive and access those with WSL (which makes the responses extremelly slow) 2. save my project files into /home/ which makes the project run super smooth, but i’m unable to edit those files with VSCode.

The error that is what follows:

4 Answers 4

Here is another command to provide your user with sufficient permissions to write to files:

Well, turns out I was being stupid and posted a stupid question.

After many hours trying to make this damn thing work, I was able to do so, by setting the ownership of the folder to my user.

Here is the shell snippet to change the ownership to the current logged in user:

I had the same problem and spent hours to find this working solution.
For me, it seems to be right one because it doesn’t produce problems with 1. too generous file permissions sent to git afterwards and 2. change ubuntu config to fit windows environment (coupling to windows user).

I found the source of this solution on github. Thanks to saltazaur! https://github.com/microsoft/WSL/issues/4260#issuecomment-729594527

Steps to solve the problem:

At next startup of ubuntu, the settings in wsl.conf will be applied.

The important part in this case is the following line:

It sets, that all newly created files will use umask 22 (chmod 775) and fmask 11 (chmod 644)

Источник

.NET Framework 4.0 Beta 2 Installation Error: Unable to create or save new files in the folder…

Unable to create or save new files in the folder into which
the files are being extracted. Please check the folder properties
to ensure you have permission on the folder to
write files and that the folder is not read-only.

Apparently, Visual Studio 2010 Beta 2 is trying to extract files into my Mac partition–even though i didn’t tell it to do this!

To fix this problem:

1. Launch Control Panel
2. Select System and Security
3. Select Administrative Tools
4. Double-click Computer Management to launch the Computer Management Console
5. Select the Disk Management node in the left pane
6. In the right pane, right-click the Mac drive (E: in my case)
7. Select Change Drive Letter and Paths… from the shortcut menu
8. In the Change Drive Letter and Paths dialog, select the Mac drive and click the Remove button
9. When the Disk Management dialog is displayed, click Yes to the confirmation question.
10. When the second Disk Management dialog is displayed, click Yes again to continue.

Obvious solution when you think about it which I’d clearly not done. Fortuantly, I’ve learnt over the years not to just go with my first reaction and do a little research before doing anything drastic…

Many thanks Kevin, it worked a treat…

Источник

Exchange Server Forums

Forums |
Register |
Login |
My Profile |
Inbox |
RSS |
My Subscription |
My Forums |
Address Book |
Member List |
Search |
FAQ |
Ticket List |
Log Out

Users viewing this topic: none

Logged in as: Guest