Application cubase 5 has caused the following error no elicenser connected

Elicenser control center ошибка

Win 10 x64 1909 Cubase 10 Pro все отлично работает. Также последняя версия ECC установлена.

Может в ОС проблема, она у вас с сайта Майкрософт или кривая сборка откуда-то.
ECC поставьте последнюю версию и проверяйте свои порты USB, желательно без хабов и переходников прямо в материнскую плату USB-eLicenser вставлять.
Большинство проблем с Soft-eLicensers или USB-eLicensers, кодами активации и лицензиями можно легко решить, установив новейший eLicenser Control Center. После установки откройте eLicenser Control Center и примените «Техническое обслуживание и онлайн-синхронизация», нажав «Выполнить задачи технического обслуживания» (или нажмите кнопку «Техническое обслуживание», если не показано).

Как устанавливаю Eliencer, то вылетает ошибка под конец его установки:

«Ошибка
Ошибка копирование файла из упакованный архив
(путь откуда я запускал установщик) в C:Windows/System32/SYNSOACC.dll»

что кубейсу не нравится?
Раньше пользовался «Cubase 10.5» (но потом решил переустановить из-за кое-каких обстоятельств) и всё было хорошо, но в итоге Елиенсер не устанавливается. И выдаёт эту ошибку.

ПОправка, почему-то Елинесер установился.
Но теперь Антитриал выдаёт ошибку:

Application ‘LCC2’ has caused the following error:

No eLicenser found.

Options:
— For troubleshooting information click .
— Connect a valid eLicenser and click .
— Click to abort.

Купил Elements 11, все установил, перезагрузил, скачал eLicenser ввожу код активации и eLicenser мне пишет что нужна флешка usb, скачал elc-installation helper он удаляет eLicenser и пишет что ошибка установка не возможна, в итоги я заплатил деньги и получил геморрой какой то

Андрей, для элемента usb флэшка не нужна, там нужен код, который идёт с программой

Андрей, попробовать обновить сам лицензер программу или заменить флэшку (это в противном случае)

Mr. Cubase. запись закреплена

МАЛЕНЬКИЙ СОВЕТ. КАК ПРАВИЛЬНО И ПРОСТО РЕГИСТРИРОВАТЬ ПРОДУКТЫ STEINBERG.

Процесс регистрации программ от Steinberg очень прост. А ожидание сложностей приводит многих в замешательство. Давайте рассмотрим процесс по пунктам и убедимся в простоте этого дела:

Итак вставили ключ в порт.

2) Запускаем инсталлятор программы.

Если у вас не было ни одной программы от Steinberg то запустится так называемый eLicenser Control Center. Это всего лишь программа для ввода серийного номера. Без ключа работать не будет.

eLicenser Control Center установился. Запустите его.

3) Первое что нужно сделать, это нажать на кнопку «Maintenance» наверху. Это обновление самого eLicenser Control Center. Если у вас каким-то образом установился старый Центр, то будет сбой в регистрации. Поэтому просто нажмите эту кнопку. Фото 1.

eLicenser Control Center обновился. Идем далее.

4) Теперь надо зарегистрировать программу Cubase, WaveLab или любую другую, которая этого требует. Для этого просто нажмите на кнопку Enter Activation Code в появившемся окне введите серйный номер. Центр сам определит, что это за программа. Фото 2.

Не пытайтесь делать регистрацию из самой программы (Cubase например). Всё делается автоматически вводом серийного номера в Центре. Все серийные номера хранятся на Ключе. Не дёргайте его во время регистрации.

Теперь смело запускайте Cubase или что-то ещё.

Всё. Как видим всё просто.

РЕГИСТРАЦИЯ ПРОГРАММ НА MySTEINBERG.

1) За что мы платим деньги? За USB ключ и серийный номер.
2) Нужна ли коробка с дисками? Нет. Но ощущение приятное.
3) Можно ли продать серийный номер? Можно.
4) Если попытаться зарегить уже зарегеный серийник? Не выйдет.
5) Можно ли пользоваться Ключом на разных ПК? Можно.
6) Нужно ли заводить аккаунт? Скорее да. Кроме перечисленного, вы имеете возможность качать дистрибутивы всех программ Steinberg.
7) Можно ли зарегить Cubase на один Ключ, а WaveLab – на другой? Можно. Тогда две программы могут быть запущены на разных ПК, а при запуске на одном ПК, два Ключа должны быть в портах.

На деле всё это занимает гораздо меньше времени, чем прочтение этого поста. Главное понять принцип и еще более важно – не усложнять. Повторимся, именно простота, вернее ожидание сложностей, запутывает пользователей.

Источник

PlanetZ forums — scopeusers.com

Scope Users Community

CUBASE 5.0 VST 32

Moderators: valis, garyb

Post by pearcey » Sun Mar 28, 2004 6:26 pm

I recently loaded my PC with Windows XP (previously had Windows 98). When I installed CUBASE 5.0, I received the following error:

«The procedure entry point SMapLS_IP_EBP_12 could not be located in the dynamic link library KERNEL32.dll.»

This version ran with no problems on Windows 98. I thought it might be an issue with Windows XP, but I have successfully installed an odler version of CUBASE on Windows XP with no problems. Any ideas?

Post by pearcey » Mon Mar 29, 2004 10:57 am

It’s me again. Someone directed me towards a patch on the Steinberg service site. I downloaded and installed it, and now receive the following error:

«SYNCROSOFT POS ERROR MESSAGE
An error has been signaled by the Protection Object Server. >Application ‘Cubase VST/32’ has caused the error
>No Protection Device connected.
Connect device and click OK to retry. Click cancel to abort»

once this error message is cancelled, a new one appears stating:

«The copy protection key could not be found! Please make sure it is plugged into the printer port!»

I guess I’m a step ahead, but am still confused about this error. Again, does anyone have any words of advice?

Post by Counterparts » Mon Mar 29, 2004 11:15 am

I know that you need to have the dongle removed to install Cubase and the dongle drivers. so perhaps this is a side-effect of installing the patch with the dongle in-situ?

You could try: uninstall Cubase and the dongle driver, physically remove the dongle, re-install Cubase and your patch and then plug the dongle back in.

Hopefully that will solve your current problem!

Источник

Cubase — VEP — Weird elicense error

Marco

Member

can’t figure out what’s the problem here.
I have just built my first PC and everything was fine with all the software until yesterday when I installed VEP.

Now when I first open VEP and then try to open cubase I get this:

»
Application ‘Cubase / Cubase Artist’ has caused the following error:

Process with the ID NOT found.

Options:
— Click to abort.
«

I had no luck checking out on google, steinberg forum etc.. any hint??
thank you so much guys

victoria

New Member

Marco

Member

yeah it is definitely elicenser, unf I’ve just finished this pc a week ago so everything is updated. I already moved the elicenser key to another usb but it didn’t change much..

dionchristou

New Member

yeah it is definitely elicenser, unf I’ve just finished this pc a week ago so everything is updated. I already moved the elicenser key to another usb but it didn’t change much..

Marco

Member

Yes man, this was the solution I found with the guys at Vsl
MAKE SURE YOU FOLLOW EVERY STEP IN DETAIL cause, at least for me, it was a matter of corrupted file that windows was not getting rid of automatically..

hope this helps man.. =)))

One quick follow-up. You could also try a clean re-installation of your VSL software. Careful — this removes custom VSL software preferences. If that is ok with you >

Please follow these steps:

1) Uninstalling VSL software via the Windows Uninstaller (I think you have VE Pro/SY Player/VI Player)

2) Deleting any leftovers here:

C:Program FilesVienna Ensemble Pro
C:Program FilesVienna Instruments
C:Program FilesVienna Synchron Player

3) Deleting the preference «*ini» files here:

4) Deleting any leftovers here:

%appdata% > VSL > Vienna Ensemble Pro
%appdata% > VSL > Vienna Instruments
%appdata% > VSL > Vienna Synchron Player

5) Then reinstalling the VSL software with the latest installer from MyVSL:

Please let me know if that changes anything. Going with the latest eLCC installer again afterwards is probably not wrong either. If that does not help, we will take this case to Steinberg and discuss matters with them directly over our developer contacts.

Источник

Some common Cubase 10 Pro errors and how to fix them

Some Cubase 10 Pro errors commonly used to sing live, record or mix music and how to fix it.

After posting the article Cubase 10 Pro Full and detailed installation instructions, there are many inboxes asking me about the software. In which, many of you encounter strange errors and do not know how to handle them.

Today’s article will help you solve the problems you are facing, please read carefully and follow the instructions.

I. Some common Cubase 10 Pro errors

1. Failed to install Soft-eLicenser Antitrial.exe

Description: You encountered an error while installing Soft-eLicenser Antitrial.exe, was installing Soft-eLicenser Antitrial.exe, then it froze and could not connect to the network more.

Cause: If you are using Windows 7 then that is the reason why the installation cannot continue Soft- eLicenser Antitrial.exe

Fix: Software may not be compatible with Windows 7, try updating to Windows 10 and reinstall. If you cannot install Windows 10, you can install and use Cubase 5 software.

If you are using Windows 10 but still not working. Please uninstall Soft-eLicenser Antitrial.exe and install another version at Cubase 10 installation guide.

2. Error No valid license found when running Cubase 10 Pro

Description: Installed Soft-eLicenser Antitrial.exe but when running Cubase 10 Pro, it gives an error “No valid license found” “

Cause: Not running eLicenser Control Center to update Liense for Cubase 10 Pro.

Fix: Start the application eLicenser Control Center, click Perform Maintenance Tasks in the dialog box Online Synchonization & Maintenance.

In the process of scanning the software will give an error, don’t worry, just press OK until it’s done. Then run Cubase 10 Pro and enjoy the result.

3. Error DCOM connection to program ‘Synsopos.exe’ failed on Cubase 10

Description: After installing all the steps, but when opening Cubase 10 pro, I get this error. Or the software is running normally, one fine day it crashes again.

Application ‘Cubase / Cubase Artist’ has caused the following error:

DCOM connection to program ‘Synsopos.exe’ failed.
Error :Unspecified error

Cause: Because anti-virus software has blocked or deleted the file Synsopos.exe

Step 1: Go to Start, find and open the program Windows Security

Handle SYNSOPOS.exe not found

Step 2: Go to Protection history

Handling SYNSOPOS.exe not found

Step 3: Find any item related to SYNOPOS.exe, press Action and Restore strong>it, then press again to select Allow.

Go back and select Manage Setting of Windows Defender, find Exclusions click on the line Add and remove Exclusions.

Next you choose Add an Exclusions -> File and Point the path to the file SYNOPOS.exe as follows:

C:Program Files (x86)eLicenserPOSSYNOPOS.exe

Or simply turn off your anti-virus programs when running cubase and you will get this error again.

For those of you who install external anti-virus software, find its history protection and restore the file SYNOPOS.exe

4. Error Cubase 10 Pro has no sound, lost sound

I have made a compilation video for you to follow:

Description: Just installed but Cubase 10 Pro has no sound, or was singing well yesterday and suddenly lost the sound today.

Cause: There are quite a few reasons for this problem, but I will only mention a few of the most common cases. Please check each of the following items and follow the instructions.

• Error 1: Can’t open Monitor on Cubase

Fix: Check the speaker icon in BEAT and VOICE on Cubase 10 software Pro, sometimes we make this very basic mistake without even knowing it.

• Error 2: Lost the right to use Soundcard or select 2 Devices

Fix: Check the right to use the Cubase 10 Pro Soundcard by checking ASIO4ALL in the system tray.

Click the ON OFF switch on the left to turn the device on and off, leave only the Soundcard in use usually has the opening name USB AUDIO CODEC or the Soundcard name in use. p>

In case if you have clicked the right choice as shown in the picture and you see an X in one of the 2 positions IN or OUT , then your Soundcard is hijacked. , close all running applications including Cubase, web browser, OBS, Media Player,… then reopen Cubase 10 first.

• Error 3: Wrong IN / OUT in Audio Connections

Fix: Check the table Audio Connection on Cubase 10 Pro. Press the F4 key, select the Input and Output tabs, and then check to see if the correct Soundcard you are using is selected.

• Error 4: Choose the wrong driver in the settings of ASIO Link Pro

In the Pick Driver section of ASIO Link Pro, you must select the correct Soundcard you are using or the whole sound will be lost.

Fix: Select the blue keyboard icon in the right corner (1), click Pick driver (2) and select correct driver in use (3).

– If it’s a Soundcard that doesn’t have its own driver like K10, Upod icon, H9, UMC22,… then choose ASIO4ALL

– If it is other series like Steinberg, Audient, UMC202HD, Motu,… then fully install the driver and select it, for example Audient USB Audio ASIO…

• Error 5: Wrong Windows IN/ Out Sound Setting

Cause: ASIO Link Pro creates a virtual audio device to put beats from youtube into Cubase software instead of going straight to Soundcard as usual, so if you choose it wrong, it won’t can’t hear the sound from Youtube or can’t record the beat.

Fix: Go to Sound Panel and Set Default ASIOVADPRO

• Error 5: Lost connection to ASIO Link Pro

Fix: Reset Studio Setup

Step by step choose in order from 1 to 4 as shown below:

Another dialog box appears, for soundcards that do not have their own driver such as XOX K10, Icon Upod Pro, K300, H9… you choose ASIO4ALL v2.

Of course, any soundcard with its own driver must be selected, such as Focusrite, Audient, Steinberg, M-Audio…

5. Error can’t raise or lower the song tone (Beat, Karaoke).

Description: Cubase 10 Pro still works normally, but when using the SoundShifter Pitch Stereo plugin to raise or lower the tone/key of the song, it does not work.

Cause: No audio path set in plugin O Deus ASIO Link

Fix: Open Control Panel O Deus ASIO Link in the following way:

Look at the lower right corner of the screen, you will see an arrow, click and select the O Deus ASIO Link Pro software icon as shown below.

A dialog box like the following appears, click on the 2 green lines that you marked to disconnect them, then drag the line from number 1 to 3, 2 to 4.

After doing it, you have the result as shown below is OK, and don’t forget to press Save profile to save it!

6. Beep beep sound when starting recording

Actually this is a feature, not a bug, but I will show you how to remove this annoying beep sound while recording with Cubase 10.

In the Record bar (F2), click the … sign as shown, then turn off the Activate Count-in function.

7. Beep beep sound during recording

Same as above, this is the Metronome Click function of Cubase software, to turn it off you also open the Record bar (F2) and click the Metronome Click button. as shown.

8. Sound is changed when importing into Cubase (Tempo, Keytone…)

Import is a feature to insert audio and video files of various formats into the timeline of Cubase software, the Sample Rate of each Project may be different, so if you insert an audio file that does not have the same Sample Rate, the audio will be changed. change tempo, pitch… if you don’t convert them.

There are 3 common Sample Rates: 96,000KHz, 44,100KHz and 48,000Khz. However, you do not need to care too much about them, what you need to do is when Import, a dialog box appears, you tick the box Sample Rate and Bit Depth as picture is fine.

9. Cubase recording is delayed

Now you will see the delay of each track (3). You enter this delay time in the Track Delay box (4) and add a “-” before it (eg -157.5).

Alternatively, you can use the software Steinberg Cubase 11 Artist on your site. Then the software will automatically compensate for the delay, you don’t need to enter it manually as above.

10. Auto-key detects wrong tone causing distortion when singing

• Error 1: Because it is an automatic plugin, sometimes the auto-key also incorrectly detects the true tone of the song, causing distortion when singing.

Fix: After auto-key detects the tone, let it run for about 10 seconds until the tone parameter If no longer changes, press “Send to Auto-Tune“.

• The second mistake is more serious that makes the tone detection 100% wrong is to put the plugin SoundShifter Pitch under Auto-key strong> (picture below)

Fix: drag Plugin SoundShifter Pitch to the top.

11. Show MIDI Remote message (MIDI remote error popup)

Cause: This error occurs when you install Cubase 12 alongside the previous version. Cubase 12 created a folder with MIDI Scripts that older versions couldn’t run.

Fix: Delete the folder “MIDI Remote” at the following path:

II. End

The above are experiences about some errors when using Cubase 10 Pro that I have ever encountered. If you know or are making other mistakes, please leave a comment below for everyone’s reference and support.

Hopefully my useful experience will help you in the process of installing Cubase to sing live or record, mix music, bla bla….

Источник

Комментарии

Пожалуйста, зарегистрируйтесь (это быстро!) или
войдите, чтобы оставлять комментарии и делать ещё массу прикольных вещей.