Содержание
- Elicenser control center ошибка
- Some common Cubase 10 Pro errors and how to fix them
- I. Some common Cubase 10 Pro errors
- 1. Failed to install Soft-eLicenser Antitrial.exe
- 2. Error No valid license found when running Cubase 10 Pro
- 3. Error DCOM connection to program ‘Synsopos.exe’ failed on Cubase 10
- 4. Error Cubase 10 Pro has no sound, lost sound
- 5. Error can’t raise or lower the song tone (Beat, Karaoke).
- 6. Beep beep sound when starting recording
- 7. Beep beep sound during recording
- 8. Sound is changed when importing into Cubase (Tempo, Keytone…)
- 9. Cubase recording is delayed
- 10. Auto-key detects wrong tone causing distortion when singing
- 11. Show MIDI Remote message (MIDI remote error popup)
- II. End
Elicenser control center ошибка
Win 10 x64 1909 Cubase 10 Pro все отлично работает. Также последняя версия ECC установлена.
Может в ОС проблема, она у вас с сайта Майкрософт или кривая сборка откуда-то.
ECC поставьте последнюю версию и проверяйте свои порты USB, желательно без хабов и переходников прямо в материнскую плату USB-eLicenser вставлять.
Большинство проблем с Soft-eLicensers или USB-eLicensers, кодами активации и лицензиями можно легко решить, установив новейший eLicenser Control Center. После установки откройте eLicenser Control Center и примените «Техническое обслуживание и онлайн-синхронизация», нажав «Выполнить задачи технического обслуживания» (или нажмите кнопку «Техническое обслуживание», если не показано).
Как устанавливаю Eliencer, то вылетает ошибка под конец его установки:
«Ошибка
Ошибка копирование файла из упакованный архив
(путь откуда я запускал установщик) в C:Windows/System32/SYNSOACC.dll»
что кубейсу не нравится?
Раньше пользовался «Cubase 10.5» (но потом решил переустановить из-за кое-каких обстоятельств) и всё было хорошо, но в итоге Елиенсер не устанавливается. И выдаёт эту ошибку.
ПОправка, почему-то Елинесер установился.
Но теперь Антитриал выдаёт ошибку:
Application ‘LCC2’ has caused the following error:
No eLicenser found.
Options:
— For troubleshooting information click .
— Connect a valid eLicenser and click .
— Click to abort.
Купил Elements 11, все установил, перезагрузил, скачал eLicenser ввожу код активации и eLicenser мне пишет что нужна флешка usb, скачал elc-installation helper он удаляет eLicenser и пишет что ошибка установка не возможна, в итоги я заплатил деньги и получил геморрой какой то
Андрей, для элемента usb флэшка не нужна, там нужен код, который идёт с программой
Андрей, попробовать обновить сам лицензер программу или заменить флэшку (это в противном случае)
Mr. Cubase. запись закреплена
МАЛЕНЬКИЙ СОВЕТ. КАК ПРАВИЛЬНО И ПРОСТО РЕГИСТРИРОВАТЬ ПРОДУКТЫ STEINBERG.
Процесс регистрации программ от Steinberg очень прост. А ожидание сложностей приводит многих в замешательство. Давайте рассмотрим процесс по пунктам и убедимся в простоте этого дела:
Итак вставили ключ в порт.
2) Запускаем инсталлятор программы.
Если у вас не было ни одной программы от Steinberg то запустится так называемый eLicenser Control Center. Это всего лишь программа для ввода серийного номера. Без ключа работать не будет.
eLicenser Control Center установился. Запустите его.
3) Первое что нужно сделать, это нажать на кнопку «Maintenance» наверху. Это обновление самого eLicenser Control Center. Если у вас каким-то образом установился старый Центр, то будет сбой в регистрации. Поэтому просто нажмите эту кнопку. Фото 1.
eLicenser Control Center обновился. Идем далее.
4) Теперь надо зарегистрировать программу Cubase, WaveLab или любую другую, которая этого требует. Для этого просто нажмите на кнопку Enter Activation Code в появившемся окне введите серйный номер. Центр сам определит, что это за программа. Фото 2.
Не пытайтесь делать регистрацию из самой программы (Cubase например). Всё делается автоматически вводом серийного номера в Центре. Все серийные номера хранятся на Ключе. Не дёргайте его во время регистрации.
Теперь смело запускайте Cubase или что-то ещё.
Всё. Как видим всё просто.
РЕГИСТРАЦИЯ ПРОГРАММ НА MySTEINBERG.
1) За что мы платим деньги? За USB ключ и серийный номер.
2) Нужна ли коробка с дисками? Нет. Но ощущение приятное.
3) Можно ли продать серийный номер? Можно.
4) Если попытаться зарегить уже зарегеный серийник? Не выйдет.
5) Можно ли пользоваться Ключом на разных ПК? Можно.
6) Нужно ли заводить аккаунт? Скорее да. Кроме перечисленного, вы имеете возможность качать дистрибутивы всех программ Steinberg.
7) Можно ли зарегить Cubase на один Ключ, а WaveLab – на другой? Можно. Тогда две программы могут быть запущены на разных ПК, а при запуске на одном ПК, два Ключа должны быть в портах.
На деле всё это занимает гораздо меньше времени, чем прочтение этого поста. Главное понять принцип и еще более важно – не усложнять. Повторимся, именно простота, вернее ожидание сложностей, запутывает пользователей.
Источник
Some common Cubase 10 Pro errors and how to fix them
Some Cubase 10 Pro errors commonly used to sing live, record or mix music and how to fix it.
After posting the article Cubase 10 Pro Full and detailed installation instructions, there are many inboxes asking me about the software. In which, many of you encounter strange errors and do not know how to handle them.
Today’s article will help you solve the problems you are facing, please read carefully and follow the instructions.
I. Some common Cubase 10 Pro errors
1. Failed to install Soft-eLicenser Antitrial.exe
Description: You encountered an error while installing Soft-eLicenser Antitrial.exe, was installing Soft-eLicenser Antitrial.exe, then it froze and could not connect to the network more.
Cause: If you are using Windows 7 then that is the reason why the installation cannot continue Soft- eLicenser Antitrial.exe
Fix: Software may not be compatible with Windows 7, try updating to Windows 10 and reinstall. If you cannot install Windows 10, you can install and use Cubase 5 software.
If you are using Windows 10 but still not working. Please uninstall Soft-eLicenser Antitrial.exe and install another version at Cubase 10 installation guide.
2. Error No valid license found when running Cubase 10 Pro
Description: Installed Soft-eLicenser Antitrial.exe but when running Cubase 10 Pro, it gives an error “No valid license found” “
Cause: Not running eLicenser Control Center to update Liense for Cubase 10 Pro.
Fix: Start the application eLicenser Control Center, click Perform Maintenance Tasks in the dialog box Online Synchonization & Maintenance.
In the process of scanning the software will give an error, don’t worry, just press OK until it’s done. Then run Cubase 10 Pro and enjoy the result.
3. Error DCOM connection to program ‘Synsopos.exe’ failed on Cubase 10
Description: After installing all the steps, but when opening Cubase 10 pro, I get this error. Or the software is running normally, one fine day it crashes again.
Application ‘Cubase / Cubase Artist’ has caused the following error:
DCOM connection to program ‘Synsopos.exe’ failed.
Error :Unspecified error
Cause: Because anti-virus software has blocked or deleted the file Synsopos.exe
Step 1: Go to Start, find and open the program Windows Security
Handle SYNSOPOS.exe not found
Step 2: Go to Protection history
Handling SYNSOPOS.exe not found
Step 3: Find any item related to SYNOPOS.exe, press Action and Restore strong>it, then press again to select Allow.
Go back and select Manage Setting of Windows Defender, find Exclusions click on the line Add and remove Exclusions.
Next you choose Add an Exclusions -> File and Point the path to the file SYNOPOS.exe as follows:
C:Program Files (x86)eLicenserPOSSYNOPOS.exe
Or simply turn off your anti-virus programs when running cubase and you will get this error again.
For those of you who install external anti-virus software, find its history protection and restore the file SYNOPOS.exe
4. Error Cubase 10 Pro has no sound, lost sound
I have made a compilation video for you to follow:
Description: Just installed but Cubase 10 Pro has no sound, or was singing well yesterday and suddenly lost the sound today.
Cause: There are quite a few reasons for this problem, but I will only mention a few of the most common cases. Please check each of the following items and follow the instructions.
- Error 1: Can’t open Monitor on Cubase
Fix: Check the speaker icon in BEAT and VOICE on Cubase 10 software Pro, sometimes we make this very basic mistake without even knowing it.
- Error 2: Lost the right to use Soundcard or select 2 Devices
Fix: Check the right to use the Cubase 10 Pro Soundcard by checking ASIO4ALL in the system tray.
Click the ON OFF switch on the left to turn the device on and off, leave only the Soundcard in use usually has the opening name USB AUDIO CODEC or the Soundcard name in use. p>
In case if you have clicked the right choice as shown in the picture and you see an X in one of the 2 positions IN or OUT , then your Soundcard is hijacked. , close all running applications including Cubase, web browser, OBS, Media Player,… then reopen Cubase 10 first.
- Error 3: Wrong IN / OUT in Audio Connections
Fix: Check the table Audio Connection on Cubase 10 Pro. Press the F4 key, select the Input and Output tabs, and then check to see if the correct Soundcard you are using is selected.
- Error 4: Choose the wrong driver in the settings of ASIO Link Pro
In the Pick Driver section of ASIO Link Pro, you must select the correct Soundcard you are using or the whole sound will be lost.
Fix: Select the blue keyboard icon in the right corner (1), click Pick driver (2) and select correct driver in use (3).
– If it’s a Soundcard that doesn’t have its own driver like K10, Upod icon, H9, UMC22,… then choose ASIO4ALL
– If it is other series like Steinberg, Audient, UMC202HD, Motu,… then fully install the driver and select it, for example Audient USB Audio ASIO…
- Error 5: Wrong Windows IN/ Out Sound Setting
Cause: ASIO Link Pro creates a virtual audio device to put beats from youtube into Cubase software instead of going straight to Soundcard as usual, so if you choose it wrong, it won’t can’t hear the sound from Youtube or can’t record the beat.
Fix: Go to Sound Panel and Set Default ASIOVADPRO
- Error 5: Lost connection to ASIO Link Pro
Fix: Reset Studio Setup
Step by step choose in order from 1 to 4 as shown below:
Another dialog box appears, for soundcards that do not have their own driver such as XOX K10, Icon Upod Pro, K300, H9… you choose ASIO4ALL v2.
Of course, any soundcard with its own driver must be selected, such as Focusrite, Audient, Steinberg, M-Audio…
5. Error can’t raise or lower the song tone (Beat, Karaoke).
Description: Cubase 10 Pro still works normally, but when using the SoundShifter Pitch Stereo plugin to raise or lower the tone/key of the song, it does not work.
Cause: No audio path set in plugin O Deus ASIO Link
Fix: Open Control Panel O Deus ASIO Link in the following way:
Look at the lower right corner of the screen, you will see an arrow, click and select the O Deus ASIO Link Pro software icon as shown below.
A dialog box like the following appears, click on the 2 green lines that you marked to disconnect them, then drag the line from number 1 to 3, 2 to 4.
After doing it, you have the result as shown below is OK, and don’t forget to press Save profile to save it!
6. Beep beep sound when starting recording
Actually this is a feature, not a bug, but I will show you how to remove this annoying beep sound while recording with Cubase 10.
In the Record bar (F2), click the … sign as shown, then turn off the Activate Count-in function.
7. Beep beep sound during recording
Same as above, this is the Metronome Click function of Cubase software, to turn it off you also open the Record bar (F2) and click the Metronome Click button. as shown.
8. Sound is changed when importing into Cubase (Tempo, Keytone…)
Import is a feature to insert audio and video files of various formats into the timeline of Cubase software, the Sample Rate of each Project may be different, so if you insert an audio file that does not have the same Sample Rate, the audio will be changed. change tempo, pitch… if you don’t convert them.
There are 3 common Sample Rates: 96,000KHz, 44,100KHz and 48,000Khz. However, you do not need to care too much about them, what you need to do is when Import, a dialog box appears, you tick the box Sample Rate and Bit Depth as picture is fine.
9. Cubase recording is delayed
Now you will see the delay of each track (3). You enter this delay time in the Track Delay box (4) and add a “-” before it (eg -157.5).
Alternatively, you can use the software Steinberg Cubase 11 Artist on your site. Then the software will automatically compensate for the delay, you don’t need to enter it manually as above.
10. Auto-key detects wrong tone causing distortion when singing
- Error 1: Because it is an automatic plugin, sometimes the auto-key also incorrectly detects the true tone of the song, causing distortion when singing.
Fix: After auto-key detects the tone, let it run for about 10 seconds until the tone parameter If no longer changes, press “Send to Auto-Tune“.
- The second mistake is more serious that makes the tone detection 100% wrong is to put the plugin SoundShifter Pitch under Auto-key strong> (picture below)
Fix: drag Plugin SoundShifter Pitch to the top.
11. Show MIDI Remote message (MIDI remote error popup)
Cause: This error occurs when you install Cubase 12 alongside the previous version. Cubase 12 created a folder with MIDI Scripts that older versions couldn’t run.
Fix: Delete the folder “MIDI Remote” at the following path:
II. End
The above are experiences about some errors when using Cubase 10 Pro that I have ever encountered. If you know or are making other mistakes, please leave a comment below for everyone’s reference and support.
Hopefully my useful experience will help you in the process of installing Cubase to sing live or record, mix music, bla bla….
Источник
Обновлено: 08.02.2023
Win 10 x64 1909 Cubase 10 Pro все отлично работает. Также последняя версия ECC установлена.
Может в ОС проблема, она у вас с сайта Майкрософт или кривая сборка откуда-то.
ECC поставьте последнюю версию и проверяйте свои порты USB, желательно без хабов и переходников прямо в материнскую плату USB-eLicenser вставлять.
Большинство проблем с Soft-eLicensers или USB-eLicensers, кодами активации и лицензиями можно легко решить, установив новейший eLicenser Control Center. После установки откройте eLicenser Control Center и примените «Техническое обслуживание и онлайн-синхронизация», нажав «Выполнить задачи технического обслуживания» (или нажмите кнопку «Техническое обслуживание», если не показано).
Как устанавливаю Eliencer, то вылетает ошибка под конец его установки:
«Ошибка
Ошибка копирование файла из упакованный архив
(путь откуда я запускал установщик) в C:Windows/System32/SYNSOACC.dll»
что кубейсу не нравится?
Раньше пользовался «Cubase 10.5» (но потом решил переустановить из-за кое-каких обстоятельств) и всё было хорошо, но в итоге Елиенсер не устанавливается. И выдаёт эту ошибку.
ПОправка, почему-то Елинесер установился.
Но теперь Антитриал выдаёт ошибку:
Application ‘LCC2’ has caused the following error:
No eLicenser found.
Options:
— For troubleshooting information click .
— Connect a valid eLicenser and click .
— Click to abort.
Купил Elements 11, все установил, перезагрузил, скачал eLicenser ввожу код активации и eLicenser мне пишет что нужна флешка usb, скачал elc-installation helper он удаляет eLicenser и пишет что ошибка установка не возможна, в итоги я заплатил деньги и получил геморрой какой то
Андрей, для элемента usb флэшка не нужна, там нужен код, который идёт с программой
Андрей, попробовать обновить сам лицензер программу или заменить флэшку (это в противном случае)
Mr. Cubase. запись закреплена
МАЛЕНЬКИЙ СОВЕТ. КАК ПРАВИЛЬНО И ПРОСТО РЕГИСТРИРОВАТЬ ПРОДУКТЫ STEINBERG.
Процесс регистрации программ от Steinberg очень прост. А ожидание сложностей приводит многих в замешательство. Давайте рассмотрим процесс по пунктам и убедимся в простоте этого дела:
Итак вставили ключ в порт.
2) Запускаем инсталлятор программы.
Если у вас не было ни одной программы от Steinberg то запустится так называемый eLicenser Control Center. Это всего лишь программа для ввода серийного номера. Без ключа работать не будет.
eLicenser Control Center установился. Запустите его.
3) Первое что нужно сделать, это нажать на кнопку «Maintenance» наверху. Это обновление самого eLicenser Control Center. Если у вас каким-то образом установился старый Центр, то будет сбой в регистрации. Поэтому просто нажмите эту кнопку. Фото 1.
eLicenser Control Center обновился. Идем далее.
4) Теперь надо зарегистрировать программу Cubase, WaveLab или любую другую, которая этого требует. Для этого просто нажмите на кнопку Enter Activation Code в появившемся окне введите серйный номер. Центр сам определит, что это за программа. Фото 2.
Не пытайтесь делать регистрацию из самой программы (Cubase например). Всё делается автоматически вводом серийного номера в Центре. Все серийные номера хранятся на Ключе. Не дёргайте его во время регистрации.
Теперь смело запускайте Cubase или что-то ещё.
Всё. Как видим всё просто.
РЕГИСТРАЦИЯ ПРОГРАММ НА MySTEINBERG.
1) За что мы платим деньги? За USB ключ и серийный номер.
2) Нужна ли коробка с дисками? Нет. Но ощущение приятное.
3) Можно ли продать серийный номер? Можно.
4) Если попытаться зарегить уже зарегеный серийник? Не выйдет.
5) Можно ли пользоваться Ключом на разных ПК? Можно.
6) Нужно ли заводить аккаунт? Скорее да. Кроме перечисленного, вы имеете возможность качать дистрибутивы всех программ Steinberg.
7) Можно ли зарегить Cubase на один Ключ, а WaveLab – на другой? Можно. Тогда две программы могут быть запущены на разных ПК, а при запуске на одном ПК, два Ключа должны быть в портах.
На деле всё это занимает гораздо меньше времени, чем прочтение этого поста. Главное понять принцип и еще более важно – не усложнять. Повторимся, именно простота, вернее ожидание сложностей, запутывает пользователей.
Читайте также:
- Как установить бомбы в стандофф 2
- Wow как убрать скилл с панели
- Как поменять шрифт в варкрафт 3
- Замена моргенштерн самп
- Aion системные требования
-
#1
Работал больше полугода нормально, и вот такая ошибка вылезла в кубе. Прога больше не работает. Версия 7. У кого было, как исправить?
-
#2
Решил проблему, запустил в ручную этот Synsopos.exe в c:windowssystem32
Похоже каждый раз придётся теперь в ручную запускать. Хотя до этого не отключал. При перезагрузке компа не помогает тоже
-
#3
Модуль запуска процессов DCOM-сервера случаем не отключен?
-
#4
Неправда. Нужно уточнять, что версия LE/AI/Elements. Это не одно и то же, что Full; потому, что защиты могут быть разные. Так какая защита? Донгл или soft e-licenser?
Forum Jump
|
Posted on Mon, Oct 12 2020 14:50 by Rik Pfenninger Joined on Wed, Jun 15 2005, Plymouth NH, Posts 55 |
||
|
I can no longer use VEPro 7 where all my sound libraries are housed! I get the following message when I launch the eLicenser Control Center: Application ‘LCC2″ has caused the following error: ??? I am on an 2019 Mac Pro running OS10.15.4 384 GB RAM with an Apogee Element 24 Audio Interface. PLEASE HELP I have project deadlines and I am dead in the water here! I am running the latest version of VePro 7 and the eLicenser Control Center Rik Pfenninger Rik Pfenninger attached the following image(s):
You cannot view/download attachments. Try to login or register. Tags: eLicenser Error Application LCC2 |
||
 |
Tags: eLicenser Error Application LCC2 |
|
ScreenU0020ShotU00202020-10-12U0020atU00209.41.12U0020AM.png |
Posted on Wed, Oct 14 2020 08:23 by Paul Joined on Sat, Aug 03 2002, Vienna, Posts 13652 |
||
|
Hi Rik, Did you make sure that you are using the latest eLicenser Control Center? These troubles should all be fixed in the latest version. Best, Paul Kopf |
||
|
|
||
|
Posted on Sat, Dec 11 2021 19:54 by passenger57 Joined on Thu, May 21 2009, Posts 200 |
||
|
Having this issue today on a score deadline. I updated the control center but the problem remains. Any ideas? |
||
|
|
||
You cannot post new threads in this forum.
You cannot reply to threads in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
Windows 10: eLicenser opens with error cannot use it or cubase 10
Discus and support eLicenser opens with error cannot use it or cubase 10 in Windows 10 BSOD Crashes and Debugging to solve the problem; I get the following error when running eLicenser as an administrator.
Application ‘LCC2’ has caused the following error:
2020-03-29T12:43:02.756…
Discussion in ‘Windows 10 BSOD Crashes and Debugging’ started by daviddeer, Mar 29, 2020.
-
eLicenser opens with error cannot use it or cubase 10
I get the following error when running eLicenser as an administrator.
Application ‘LCC2’ has caused the following error:
2020-03-29T12:43:02.756
DCOM connection to program ‘Synsopos.exe’ failed.
Class not registered 0x8004015I have uninstalled it completely and downloaded and installed the latest version from steinberg but to no avail.
Dcom service is running as auto and cannot be stopped.
When running cubase I get the follwoing error.
Application ‘Cubase / Cubase Artist’ has caused the following error:
2020-03-29T12:47:35.978
DCOM connection to program ‘Synsopos.exe’ failed.
Class not registered 0x80040154How can I fix this error?
-
Cubase eLicense problem windows 10 last update
Hello
I want to ask you about a problem that is bothering me too much (thank you microsoft).
Yesterday my computer has downloaded and installed the last update for windows 10. After that, I tried to use the Cubase program (version
and the eLicense software tells me that I cannot use it and I need the license. I tried to use the code, but the elicenser
says that I cannot use it. I don’t know why, and I don’t know what to do. I will attached you some screenshots of whats happening. Please, I’m a kind of stupid guys with computers. I just want to use my cubase software. Thank you microsoft for making my life
more difficult.Thank you
-
New Windows Update installed today but I can not open my eLicenser to use my daw
Today there was a new Windows Update, Version 1806. I wanted to use my digital audio workstation and I tried to open my elicenser and I get error messages. I deleted the elicenser and downloaded again from my Steinberg account and re-installed the software.
I get the same error messages. What should I do?[Moved from:Windows/Windows 10/Install & upgrade]
-
eLicenser opens with error cannot use it or cubase 10
Cubase and Kontakt not working properly in Windows 10
Hi Barrie,
The challenge that you are experiencing can occur if the versions of your programs are incompatible with Windows 10. To better assist you with your concern, kindly answer the following questions below:
- Which version of Cubase and Kontakt are you using?
- Have you tried checking the compatibility of those versions with Windows 10 on their respective websites?
We look forward to your response.
and the eLicense software tells me that I cannot use it and I need the license. I tried to use the code, but the elicensereLicenser opens with error cannot use it or cubase 10
-
eLicenser opens with error cannot use it or cubase 10 — Similar Threads — eLicenser opens error
-
Cannot open files. Error 0x80071771
in Windows 10 Network and Sharing
Cannot open files. Error 0x80071771: Hello,I’ve had few folders encrypted around 2 years ago on a hard drive not maindrive. After reinstalling windows once every drive fully deleted but the one which the important and encrypted folders I couldn’t copy / open these files anymore. After research I have gone to… -
Cannot open files. Error 0x80071771
in Windows 10 Gaming
Cannot open files. Error 0x80071771: Hello,I’ve had few folders encrypted around 2 years ago on a hard drive not maindrive. After reinstalling windows once every drive fully deleted but the one which the important and encrypted folders I couldn’t copy / open these files anymore. After research I have gone to… -
Cannot open files. Error 0x80071771
in Windows 10 Software and Apps
Cannot open files. Error 0x80071771: Hello,I’ve had few folders encrypted around 2 years ago on a hard drive not maindrive. After reinstalling windows once every drive fully deleted but the one which the important and encrypted folders I couldn’t copy / open these files anymore. After research I have gone to… -
Cannot open photos using Photo app on Windows 10
in Windows 10 Software and Apps
Cannot open photos using Photo app on Windows 10: Hello — I cannot access my photos using microsoft Photos app windows 10 the problem appears to be associated with no access to microsoft store at all. I have tried all the fixes recommended but still no joy. Can anyone help — spent all of yesterday trying various ways around… -
Cannot use or see any open ports?
in AntiVirus, Firewalls and System Security
Cannot use or see any open ports?: I’m trying to use port forwarding 51234 so that I can host a server on MapTool, but nothing I do seems to work.I’ve added port 51234 as an exception both in my router’s port forwarding settings, AND in Windows Defender Firewall, but I can’t get anyone to connect; everyone… -
eLicenser Control cannot be installed?
in Windows 10 BSOD Crashes and Debugging
eLicenser Control cannot be installed?: Hey I’ve been trying to download the eLincenser (Windows 10) for 2 days to activate Cubase. However, I get an error message during installation (see picture). Can someone tell me how to fix it?[ATTACH]
eLicenser Control kann nicht installiert werden?
-
cubase ai
in Windows 10 Updates and Activation
cubase ai: won,t open cubase ai says no skin found then gui resorses.https://answers.microsoft.com/en-us/windows/forum/all/cubase-ai/4e956ca2-e410-4a89-b45e-6cba353e30bd»
-
cannot open attachments in win 10 using bell mail
in Windows 10 Network and Sharing
cannot open attachments in win 10 using bell mail: since the last update in win 10, i cannot open attachments in my bell mail . i have tried using microsoft edge but all i can get it to whenit opens is turn into a big red square and then close. what can i do to open the attachments?…
-
bugs & crashes with cubase 10 & win 10
in Windows 10 Installation and Upgrade
bugs & crashes with cubase 10 & win 10: hi i’m davidi’m using music user with daw cubase 10.0.40 & win 10 1903
after last win 10 updates, I got many problems without reasons
crashes , buggy situations, lost of informations etc
many users have same problems after updates win 10
is it win 10 beta testing…
Users found this page by searching for:
-
elicenser lcc2 error
,
-
dcom connection to program synsopos.exe failed
,
-
lcc2 error cubase
,
- how to solve application LCC2 has caused the following error,
- cloud not connect pos cubase,
- nu vot,
- Application LCC2 has caused the following error:DCOM connection to program Synsopos.exe failed.,
- Lcc2 has caused the following error,
- list of drivers to fix synsopos.Exe,
- download drivers to fix synsopos.Exe ,
- synsopos exe failed class not registered,
- application lcc2 has caused the following error: dcom connection to program synsopos.exe failed. error:error no especificado,
- DCOM connection to program Synsopos.exe failed 2020,
- application lcc2 has caused the following,
- cubase artist has caused error
Some Cubase 10 Pro errors commonly used to sing live, record or mix music and how to fix it.
After posting the article Cubase 10 Pro Full and detailed installation instructions, there are many inboxes asking me about the software. In which, many of you encounter strange errors and do not know how to handle them.
Today’s article will help you solve the problems you are facing, please read carefully and follow the instructions.
I. Some common Cubase 10 Pro errors
1. Failed to install Soft-eLicenser Antitrial.exe
Description: You encountered an error while installing Soft-eLicenser Antitrial.exe, was installing Soft-eLicenser Antitrial.exe, then it froze and could not connect to the network more.
Cause: If you are using Windows 7 then that is the reason why the installation cannot continue Soft- eLicenser Antitrial.exe
Fix: Software may not be compatible with Windows 7, try updating to Windows 10 and reinstall. If you cannot install Windows 10, you can install and use Cubase 5 software.< /p>
If you are using Windows 10 but still not working. Please uninstall Soft-eLicenser Antitrial.exe and install another version at Cubase 10 installation guide.
2. Error No valid license found when running Cubase 10 Pro
Description: Installed Soft-eLicenser Antitrial.exe but when running Cubase 10 Pro, it gives an error “No valid license found” “
Cause: Not running eLicenser Control Center to update Liense for Cubase 10 Pro.
Fix: Start the application eLicenser Control Center, click Perform Maintenance Tasks in the dialog box Online Synchonization & Maintenance.
In the process of scanning the software will give an error, don’t worry, just press OK until it’s done. Then run Cubase 10 Pro and enjoy the result.
3. Error DCOM connection to program ‘Synsopos.exe’ failed on Cubase 10
Description: After installing all the steps, but when opening Cubase 10 pro, I get this error. Or the software is running normally, one fine day it crashes again.
Application ‘Cubase / Cubase Artist’ has caused the following error:
DCOM connection to program ‘Synsopos.exe’ failed.
Error :Unspecified error
Cause: Because anti-virus software has blocked or deleted the file Synsopos.exe
Fix:
Step 1: Go to Start, find and open the program Windows Security
Step 2: Go to Protection history
Step 3: Find any item related to SYNOPOS.exe, press Action and Restore strong>it, then press again to select Allow.
Go back and select Manage Setting of Windows Defender, find Exclusions click on the line Add and remove Exclusions.
Next you choose Add an Exclusions -> File and Point the path to the file SYNOPOS.exe as follows:
C:Program Files (x86)eLicenserPOSSYNOPOS.exe
Or simply turn off your anti-virus programs when running cubase and you will get this error again.
For those of you who install external anti-virus software, find its history protection and restore the file SYNOPOS.exe
4. Error Cubase 10 Pro has no sound, lost sound
I have made a compilation video for you to follow:
Description: Just installed but Cubase 10 Pro has no sound, or was singing well yesterday and suddenly lost the sound today.
Cause: There are quite a few reasons for this problem, but I will only mention a few of the most common cases. Please check each of the following items and follow the instructions.
- Error 1: Can’t open Monitor on Cubase
Fix: Check the speaker icon in BEAT and VOICE on Cubase 10 software Pro, sometimes we make this very basic mistake without even knowing it.
- Error 2: Lost the right to use Soundcard or select 2 Devices
Fix: Check the right to use the Cubase 10 Pro Soundcard by checking ASIO4ALL in the system tray.
Click the ON OFF switch on the left to turn the device on and off, leave only the Soundcard in use usually has the opening name USB AUDIO CODEC or the Soundcard name in use. p>
In case if you have clicked the right choice as shown in the picture and you see an X in one of the 2 positions IN or OUT , then your Soundcard is hijacked. , close all running applications including Cubase, web browser, OBS, Media Player,… then reopen Cubase 10 first.
- Error 3: Wrong IN / OUT in Audio Connections
Fix: Check the table Audio Connection on Cubase 10 Pro. Press the F4 key, select the Input and Output tabs, and then check to see if the correct Soundcard you are using is selected.
- Error 4: Choose the wrong driver in the settings of ASIO Link Pro
In the Pick Driver section of ASIO Link Pro, you must select the correct Soundcard you are using or the whole sound will be lost.
Fix: Select the blue keyboard icon in the right corner (1), click Pick driver (2) and select correct driver in use (3).
– If it’s a Soundcard that doesn’t have its own driver like K10, Upod icon, H9, UMC22,… then choose ASIO4ALL
– If it is other series like Steinberg, Audient, UMC202HD, Motu,… then fully install the driver and select it, for example Audient USB Audio ASIO…
- Error 5: Wrong Windows IN/ Out Sound Setting
Cause: ASIO Link Pro creates a virtual audio device to put beats from youtube into Cubase software instead of going straight to Soundcard as usual, so if you choose it wrong, it won’t can’t hear the sound from Youtube or can’t record the beat.
Fix: Go to Sound Panel and Set Default ASIOVADPRO
- Error 5: Lost connection to ASIO Link Pro
Fix: Reset Studio Setup
Step by step choose in order from 1 to 4 as shown below:
Another dialog box appears, for soundcards that do not have their own driver such as XOX K10, Icon Upod Pro, K300, H9… you choose ASIO4ALL v2.
Of course, any soundcard with its own driver must be selected, such as Focusrite, Audient, Steinberg, M-Audio…
5. Error can’t raise or lower the song tone (Beat, Karaoke).
Description: Cubase 10 Pro still works normally, but when using the SoundShifter Pitch Stereo plugin to raise or lower the tone/key of the song, it does not work.< /p>
Cause: No audio path set in plugin O Deus ASIO Link
Fix: Open Control Panel O Deus ASIO Link in the following way:
Look at the lower right corner of the screen, you will see an arrow, click and select the O Deus ASIO Link Pro software icon as shown below.
A dialog box like the following appears, click on the 2 green lines that you marked to disconnect them, then drag the line from number 1 to 3, 2 to 4.< /strong>
After doing it, you have the result as shown below is OK, and don’t forget to press Save profile to save it!
6. Beep beep sound when starting recording
Actually this is a feature, not a bug, but I will show you how to remove this annoying beep sound while recording with Cubase 10.
In the Record bar (F2), click the … sign as shown, then turn off the Activate Count-in function.
7. Beep beep sound during recording
Same as above, this is the Metronome Click function of Cubase software, to turn it off you also open the Record bar (F2) and click the Metronome Click button. as shown.
8. Sound is changed when importing into Cubase (Tempo, Keytone…)
Import is a feature to insert audio and video files of various formats into the timeline of Cubase software, the Sample Rate of each Project may be different, so if you insert an audio file that does not have the same Sample Rate, the audio will be changed. change tempo, pitch… if you don’t convert them.
There are 3 common Sample Rates: 96,000KHz, 44,100KHz and 48,000Khz. However, you do not need to care too much about them, what you need to do is when Import, a dialog box appears, you tick the box Sample Rate and Bit Depth as picture is fine.
9. Cubase recording is delayed
Now you will see the delay of each track (3). You enter this delay time in the Track Delay box (4) and add a “-” before it (eg -157.5).
Alternatively, you can use the software Steinberg Cubase 11 Artist on your site. Then the software will automatically compensate for the delay, you don’t need to enter it manually as above.
10. Auto-key detects wrong tone causing distortion when singing
- Error 1: Because it is an automatic plugin, sometimes the auto-key also incorrectly detects the true tone of the song, causing distortion when singing.
Fix: After auto-key detects the tone, let it run for about 10 seconds until the tone parameter If no longer changes, press “Send to Auto-Tune“.
- The second mistake is more serious that makes the tone detection 100% wrong is to put the plugin SoundShifter Pitch under Auto-key strong> (picture below)
Fix: drag Plugin SoundShifter Pitch to the top.
11. Show MIDI Remote message (MIDI remote error popup)
Cause: This error occurs when you install Cubase 12 alongside the previous version. Cubase 12 created a folder with MIDI Scripts that older versions couldn’t run.
Fix: Delete the folder “MIDI Remote” at the following path:
C:UsersUsernameDocumentsSteinbergCubase
II. End
The above are experiences about some errors when using Cubase 10 Pro that I have ever encountered. If you know or are making other mistakes, please leave a comment below for everyone’s reference and support.
Hopefully my useful experience will help you in the process of installing Cubase to sing live or record, mix music, bla bla….
Thanks and see you soon!!!