Содержание
- Avision fb2280e error e7
- Коды ошибок сканера Avision FB2280E
- Коды распространенных ошибок сканера
- Коды ошибок сканера Avision FB2280E
- Коды распространенных ошибок сканера
- Avision FB2280E Manual
- FB2280E
- Leading Edge in Book Scanning
- Product Details
- ▎The slant front platform makes book scan easy as a breeze
- ▎High Qualities Scanning Solution
- ▎Automatic multiple images cropping
- ▎Easy-to-use button scanning
- ▎Auto crop, deskew and thresholding image-enhancing features
- ▎Certification mark
- ENERGY STAR
- What is ENERGY STAR?
- Choose ENERGY STAR Qualified Products
- Specification
Avision fb2280e error e7
КОНФЕРЕНЦИЯ СТАРТКОПИ
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
0. sanochnik 17.02.17 11:00
Проблем у сканера несколько, но думаю, что причина в чем то одном.
Первая: Через раз делает светлые сканы (причём постепенно доходит до совсем белого листа), помогает только перезагрузка, но через какое то время всё опять повторяется.
Вторая: Если некоторое время ничего не сканировать, то выпадает ошибка Е9, а компьютер сообщает, что проблемы с питанием USB
Вы делали что-нибудь со сканером вообще (профилактика,шлейфы на плате передёргивали) или сразу вопрос сюда?
2. sanochnik 17.02.17 11:22
Прошу прощения, что сразу не написал. Конечно делал. Профилактику. Шлейфы также передёргивал
sanochnik (0): Если некоторое время ничего не сканировать,
Примерно сколько?
Пробег аппарата — сколько?
Длина и маркировка интерфейсного кабеля?
4. sanochnik 17.02.17 12:06
Если интерфейсный кабель (USB) подключен к компьютеру, то весь рабочий день ошибка E9 не выпадает. Но приходишь утром — ошибка есть. Если кабель USB вообще не подключен к компьютеру то минут через 30 ошибка выпадает.
Интерфейсный кабель — USB, длинна 1,8 метра
Маркировка: AWM I777 VW-1 80C 300V 18AWG E234038 HELI
sanochnik (4): 18AWG
К кабелю больше вопросов нет.
А чего пишет Мануалий Сервисный про эту Е9?
6. sanochnik 17.02.17 14:43
В том то и дело, что нигде не могу найти сервисный мануал, и хуже того, нигде нет информации по этим ошибкам
Этот сканер — наверняка какой-то Xerox DocuMate.
И внешне похож, и ошибка «ксероксная».
На нем стоит автоподатчик?
8. sanochnik 17.02.17 15:48
(7) Спасибо. Я уже видел эту ссылку. Но на нём нет автоподатчика
The Report button
If you encounter any error message while using the scanner,
click the Report button. A report.txt file (C:AVxxx) will be
generated. Please send this file to the nearest service center
for trouble shooting.
Посмотреть бы на этот репорт.
10. sanochnik 20.02.17 15:29
(9) Виталий, так нет такой кнопки на сканере
Начните с простого. Например, подкиньте заведомо исправный БП.
12. Виталий 21.02.17 01:39
sanochnik (10): Виталий, так нет такой кнопки на сканере
Источник
Коды ошибок сканера Avision FB2280E
Avision FB2280E — стационарный планшетный сканер, создающий качественные оттиски без искажения и затмения текста. Устройство разработали специально для сканирования книг. Передний край аппарата наклонен вперед – темные области в месте перегиба исключены.
Теперь, чтобы создать качественную скан-копию страницы, разворота книги не нужно прикладывать титанические усилия, чтобы прижать ее. Также, исключается повреждение самой книги. Однако, в процессе эксплуатации Avision FB2280E могут возникать ошибки.
Коды распространенных ошибок сканера
Avision FB2280E, как и любая другая техника может выходить из строя по ряду причин. Из самых распространённых ошибок, с которыми сталкивались пользователи устройства выделяют следующие:
- Код ошибки Е7 – горит красный диод питания, когда возникает неисправность между наружным и внутренним блоком.
- Код ошибки Е3 — возникает, когда не двигается каретка печатающего устройства.
- Е9 – код ошибки, требующий сделать отчет о работе устройства. Возможно, проблема в перегрузке от высокого давления. Для этого заходят в программу, нажимают на кнопку «Сообщить», после этого сгенерируется файл report.txt (C: AVxxx). После завершения операции файл отправляют в сервисный центр, чтобы специалисты определили причину неполадки и устранили её.
О том, как их устранить и в чем причины возникновения указано в инструкции к устройству. Иногда достаточно дать прибору остыть или перезапустить его, чтобы восстановился рабочий процесс в прежнем режиме. Но бывает, что ошибка возникает из-за проблемы в техническом элементе сканера. Тогда может понадобится замена деталей.
Источник
Коды ошибок сканера Avision FB2280E
Avision FB2280E — стационарный планшетный сканер, создающий качественные оттиски без искажения и затмения текста. Устройство разработали специально для сканирования книг. Передний край аппарата наклонен вперед – темные области в месте перегиба исключены.
Теперь, чтобы создать качественную скан-копию страницы, разворота книги не нужно прикладывать титанические усилия, чтобы прижать ее. Также, исключается повреждение самой книги. Однако, в процессе эксплуатации Avision FB2280E могут возникать ошибки.
Коды распространенных ошибок сканера
Avision FB2280E, как и любая другая техника может выходить из строя по ряду причин. Из самых распространённых ошибок, с которыми сталкивались пользователи устройства выделяют следующие:
- Код ошибки Е7 – горит красный диод питания, когда возникает неисправность между наружным и внутренним блоком.
- Код ошибки Е3 — возникает, когда не двигается каретка печатающего устройства.
- Е9 – код ошибки, требующий сделать отчет о работе устройства. Возможно, проблема в перегрузке от высокого давления. Для этого заходят в программу, нажимают на кнопку «Сообщить», после этого сгенерируется файл report.txt (C: AVxxx). После завершения операции файл отправляют в сервисный центр, чтобы специалисты определили причину неполадки и устранили её.
О том, как их устранить и в чем причины возникновения указано в инструкции к устройству. Иногда достаточно дать прибору остыть или перезапустить его, чтобы восстановился рабочий процесс в прежнем режиме. Но бывает, что ошибка возникает из-за проблемы в техническом элементе сканера. Тогда может понадобится замена деталей.
Источник
Avision FB2280E Manual
Regulatory model: DF-1002S
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows and MS-DOS are trademarks of Microsoft Corporation. IBM, IBM PC are registered trademarks of International Business Machines Corp.
ENERGY STAR ® is a U.S. registered mark.
Other brands and product names herein are trademarks or registered trademarks of their respective holders.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Avision Inc.
Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws, the customer is solely responsible for complying with all such laws and regulations.
The information contained in this document is subject to change without notice.
Avision makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Federal Communications Commission (FCC) compliance information statement
The product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense.
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Disposal of Waste Equipment by Users in Private Union
This symbol on the product or on its packaging indicates that the product can not be disposed of with your other household waste. Instead it should be sent to appropriate facilities for recovery and recycling in an effort to protect human health and the environment. Fore more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
As an ENERGY STAR® Partner, Avision Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
¾ IBM compatible PC 586, Pentium or higher
¾ Microsoft Windows 2000, Windows XP, Windows Vista/Windows 7
¾ USB port 2.0 (compatible with USB 1.1)
¾ At least 100 MB of free hard disk space (500 MB is recommended)
¾ At least 128 MB of system memory (512 MB of RAM is recommended)
Источник
FB2280E
Leading Edge in Book Scanning
Avision’s book edge scanners feature a unique, innovative flatbed platform, with a slanted front edge engineered to accommodate books in a way that prevents the dark, shadowy area near the spine from appearing. Curved text often seen near the center is also eliminated, since this special design allows pages to spread flat on the scanner. Never again would you need to press the book against the scanner, which distorts the scanned image and potentially damages the book. Avision makes book scanning a breeze!
The Avision FB2280E is designed from the ground up to excel at scanning books. Packed with CCD sensors and a 600 dpi optical resolution, it can produce high quality A4 scans in 4 seconds at 200 dpi in black and white.
Another unique feature of the FB2280E is the document cover. With this cover, you can temporarily place your documents safely on the scanner, reducing the risk of misplacing them during scanning.
An optional ADF add-on is available for the FB2280E, with a 50 sheet capacity and a maximum document size of 21.6 x 36.5cm.
Product Details
▎The slant front platform makes book scan easy as a breeze
With the innovative and patented front platform, the Avision FB2280E allows you to easily scan books and deliver clear images within 2mm of the book spine. Shadow and text distortion commonly found on books scanned by traditional scanners are no longer existed.
▎High Qualities Scanning Solution
The FB2280E’s core image processing components are CCD based with a 600 dpi optical resolution, enabling it to output picture perfect quality while meeting the most stringent demands of business professionals anywhere.
▎Automatic multiple images cropping
In addition, the scanner comes with the convenient feature of multiple images cropping. With this feature, various sizes of documents such as photos, ID Cards, or business cards can be placed on the flatbed and the scanner is able to crop and create multiple images according to the original sizes of the documents in one single scan.
▎Easy-to-use button scanning
With the bundled software “Button Manager”, you can create searchable pdf file directly after pressing the button on the scanner. Pages are automatically cropped and rotated to the correct orientation and then saved to your choice of file formats including PDF, TIFF, JPEG, GIF, BMP, or searchable PDF. The program also lets you pre-set nine customized functions or destination application such as e-mail, printer, or other photo editing software application for a variety of scanning tasks.
▎Auto crop, deskew and thresholding image-enhancing features
FB2280E incorporates the latest TWAIN driver with new features and enhancement such as the ability to adjust sensitivity of dynamic threshold, document/photo color matching, custom color dropout, automatic multiple cropping, and reduce despeckle. We are committed to improving the TWAIN driver continuously to enrich your scanning experience as never before.
▎Certification mark
 |
 |
 |
 |
ENERGY STAR
What is ENERGY STAR?
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
Choose ENERGY STAR Qualified Products
ENERGY STAR qualified products meet strict energy efficiency guidelines set by the U.S. EPA and U.S. Department of Energy. They use less energy, save money, and help protect the environment.
Specification
Charged-Coupled Device ( CCD )
Flatbed, ADF (optional)
BMP, PNG, GIF, JPEG, Single-Page PDF, Multi-Page PDF, Multi-TIFF, TIFF, RTF, TXT, OCR( for iScan only ), XPS, DOC, XLS, PPT, DOCS, XLSX, PPTX, HTML
Dither and Error Diffusion
16-bit input 8-bit output
48-bit input 24-bit output
253 x 160 x 55 mm ( 10 x 6.3 x 2.2 in )
Operation: Scan Size
114 x 139 mm ( 4.5 x 5.5 in ) (Option ADF)
216 x 356 mm (Legal) ( 8.5 x 14 in ) (Option ADF)
50 sheets ( Optional ADF )
120 g/m² ( 13 to 32 lb. ) ( Optional ADF )
4 sec. / 5.5 sec. (Include Backhome)
4 sec. / 5.5 sec. (Include Backhome)
4 sec. / 5.5 sec. (Include Backhome)
4 sec. / 5.5 sec. (Include Backhome)
* The above specifications may vary due to computer performance and sales regions. For further details, please consult your local distributor.
Источник
Adblock
detector
| General Specification |
| Technology |
|---|
| ADF Minimum |
| Scanning Speed |
| B/W @ 200dpi, A4 |
КОНФЕРЕНЦИЯ СТАРТКОПИ
Принтеры, копировальные аппараты, МФУ, факсы и другая офисная техника:
вопросы ремонта, обслуживания, заправки, выбора
0. sanochnik 17.02.17 11:00
Проблем у сканера несколько, но думаю, что причина в чем то одном.
Первая: Через раз делает светлые сканы (причём постепенно доходит до совсем белого листа), помогает только перезагрузка, но через какое то время всё опять повторяется.
Вторая: Если некоторое время ничего не сканировать, то выпадает ошибка Е9, а компьютер сообщает, что проблемы с питанием USB
Вы делали что-нибудь со сканером вообще (профилактика,шлейфы на плате передёргивали) или сразу вопрос сюда?
2. sanochnik 17.02.17 11:22
Прошу прощения, что сразу не написал. Конечно делал. Профилактику. Шлейфы также передёргивал
4. sanochnik 17.02.17 12:06
sanochnik (4): 18AWG
К кабелю больше вопросов нет.
А чего пишет Мануалий Сервисный про эту Е9?
6. sanochnik 17.02.17 14:43
В том то и дело, что нигде не могу найти сервисный мануал, и хуже того, нигде нет информации по этим ошибкам
И внешне похож, и ошибка «ксероксная».
На нем стоит автоподатчик?
8. sanochnik 17.02.17 15:48
(7) Спасибо. Я уже видел эту ссылку. Но на нём нет автоподатчика
The Report button
If you encounter any error message while using the scanner,
click the Report button. A report.txt file (C:AVxxx) will be
generated. Please send this file to the nearest service center
for trouble shooting.
Посмотреть бы на этот репорт.
10. sanochnik 20.02.17 15:29
(9) Виталий, так нет такой кнопки на сканере
Начните с простого. Например, подкиньте заведомо исправный БП.
12. Виталий 21.02.17 01:39
sanochnik (10): Виталий, так нет такой кнопки на сканере
Источник
Вопросы: Во время сканирования возникает замятие
Ответы: 1) Откройте переднюю дверцу сканера.
Осторожно извлеките замятую бумагу.
Закройте переднюю дверцу сканера.
Вопросы: В сканер подается несколько листов бумаги.
Ответы: 1) Откройте переднюю дверцу сканера.
Извлеките листы бумаги, которые подаются
Закройте переднюю дверцу сканера.
Распрямите углы и края бумаги. Перед повторной
установкой бумаги в направляющую разделите
Проверьте состояние подающего ролика. По мере
необходимости выполните указания по очистке,
содержащиеся в разделе 5.1, и очистите сканер.
Вопросы: Бумагу перекашивает в сканере.
Ответы: 1) Придвиньте направляющие планки к краям
бумаги, чтобы она подавалась ровно.
Проверьте состояние подающего ролика. По мере
необходимости выполните указания по очистке,
содержащиеся в разделе 5.1, и очистите сканер.
Вопросы: Почему сканированное изображение всегда получается.
Вопросы: Почему сканированное изображение всегда
получается слишком темным?
Ответы: 1) Установите для настройки монитора Gamma
(Гамма) значение 1,8, а во время печати
установите для принтера значение 2,2.
Для получения более светлого изображения
используйте параметр Brightness (Яркость) в
пользовательском интерфейсе TWAIN.
Вопросы: Иногда кажется, что сканер не определяет
Датчик бумаги сканера расположен в центре
направляющей бумаги. Поместите сканируемый
документ на направляющую бумаги и придвиньте
Источник
Loading…
Bookedge Scanner
User’s Manual
Regulatory model: DF-1002S
Avision Inc.
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows and MS-DOS are trademarks of Microsoft Corporation. IBM, IBM PC are registered trademarks of International Business Machines Corp.
ENERGY STAR® is a U.S. registered mark.
Other brands and product names herein are trademarks or registered trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Avision Inc.
Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws, the customer is solely responsible for complying with all such laws and regulations.
Warranty
The information contained in this document is subject to change without notice.
Avision makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose.
Avision shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
ii
User’s Manual
Federal Communications Commission (FCC) compliance information statement
Part 15
The product has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense.
CE Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
iii
Disposal of Waste Equipment by Users in Private Union
This symbol on the product or on its packaging indicates that the product can not be disposed of with your other household waste. Instead it should be sent to appropriate facilities for recovery and recycling in an effort to protect human health and the environment. Fore more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
As an ENERGY STAR® Partner, Avision Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
System Requirements
¾IBM compatible PC 586, Pentium or higher
¾Microsoft Windows 2000, Windows XP, Windows Vista/Windows 7
¾USB port 2.0 (compatible with USB 1.1)
¾At least 100 MB of free hard disk space (500 MB is recommended)
¾At least 128 MB of system memory (512 MB of RAM is recommended)
At least 1 GB of RAM for Windows Vista
¾A CD-ROM drive
iv
User’s Manual
Table of Contents
|
1. |
Introduction ……………………………………………………. |
1-1 |
|
|
2. |
Scanner Installation………………………………………. |
2-1 |
|
|
2.1 |
Unlocking your scanner…………………………… |
2-2 |
|
|
2.2 |
Connecting to Power………………………………. |
2-3 |
|
|
3. |
Completing Your First Scan………………………….. |
3-1 |
|
|
3.1 |
Loading Your Paper ……………………………….. |
3-1 |
|
|
3.2 |
Verifying Your Scanner Installation …………….. |
3-2 |
|
|
4. |
Using the Scanner Properties Dialog Box….. |
4-1 |
|
|
4.1 |
Buttons on the Scanner Properties Dialog Box .. |
4-2 |
|
|
4.2 |
The Image Tab …………………………………….. |
4-4 |
|
|
4.3 |
The Compression Tab …………………………… |
4-23 |
|
|
4.4 |
The Color Dropout Tab………………………….. |
4-25 |
|
|
4.5 |
The Paper Tab ……………………………………. |
4-29 |
|
|
4.6 |
The Multi-Feed Detection Tab………………….. |
4-36 |
|
|
4.7 |
The Preview Tab …………………………………. |
4-47 |
|
|
4.8 |
The Options Tab………………………………….. |
4-48 |
|
|
4.9 |
The Setting Tab ………………………………….. |
4-56 |
|
|
4.10 |
The Imprinter Tab ……………………………. |
4-59 |
|
|
4.11 |
The Information Tab …………………………. |
4-62 |
|
|
5. |
ISIS Interface Operation ……………………………… |
5-1 |
|
|
6. |
Using the Buttons ………………………………………….. |
6-1 |
|
|
6.1 |
Installing Button Manager ……………………….. |
6-2 |
6.2Checking Button Configurations Before Scanning6-3
|
6.3 Scanning From One Touch of the Buttons…….. |
6-5 |
v
|
7. |
Maintenance……………………………………………………. |
7-1 |
|
7.1 Cleaning the Glass…………………………………. |
7-1 |
|
|
8. |
Troubleshooting……………………………………………… |
8-1 |
8.1Removing the abnormal lines on your scanned
|
image………………………………………………… |
8-1 |
|
|
8.2 |
Questions and Answers …………………………… |
8-2 |
|
8.3 |
Technical Service ………………………………….. |
8-4 |
9.Using and Caring the Optional Auto Document
|
Feeder………………………………………………………………. |
9-1 |
|
|
9.1 |
Installing the Auto Document Feeder…………… |
9-1 |
|
9.2 |
Loading Your Paper ……………………………….. |
9-3 |
|
9.3 |
Clearing a Paper Jam ……………………………… |
9-5 |
|
9.4 |
Caring the Auto Document Feeder ……………… |
9-6 |
|
10. Specifications ……………………………………………….. |
10-1 |
|
|
Index………………………………………………………………………. |
10-1 |
vi
User’s Manual
1.Introduction
Congratulations on your purchase of the Avision’s bookedge scanner. Avision is one of the leading companies to make high quality color image scanner.
Before you install and operate the new scanner, please take a few minutes to read through this manual. It provides proper instructions for you to unpack, install, operate and maintain the scanner.
The following figure indicates the package contents. Please check all the items against your checklist. If you do not receive all the items, please contact your authorized local dealer immediately.
1-1
1
2
3
4
1.Scanner main unit
2.Quick guide/CD
3.USB cable
4.Power cord/ Power adapter
Note:
1.Only use the AC adapter HEG42-240200-7L (Hitron)/DA48M24 (APD) included in the machine. Using other AC adapters may damage the machine and void the warranty.
2.Please unpack the packing carefully, and check the contents against the checklist. If any items are missing or damaged, please contact your dealer immediately.
1-2
User’s Manual
2.Scanner Installation
Precautions
Keep the scanner out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit.
Do not install the scanner in a humid or dusty place.
Place the scanner securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feeding problems.
Retain the scanner box and packing materials for shipping purposes.
2-1
2.1Unlocking your scanner
To protect the scanning unit from damage during transportation, a lock switch is designed at the back of the scanner to keep the scanning unit from moving. To unlock the scanner, move the lock switch up as shown in Fig. 2-1.
Lock
Unlock
Figure 2-1 Unlocking the Scanner
Scanning unit at this position before locking the scanner
Figure 2-2 Home position
Note: If the scanning unit is not located at the front of the scanner before transporting the scanner, be sure to do the follows:
1.Turn on the scanner. The scanning unit should move to the front of the scanner.
2.Press the lock switch down to the “Lock position”.
3.The scanner is now ready to transport.
2-2
User’s Manual
2.2Connecting to Power
Plug the small end of the power adaptor into the power jack of your scanner. Insert the other end to an appropriate power outlet.
2.2.1 Turning on the Power
To turn on the scanner, press the Power Switch button on the front panel. The Power LED will be lit. To turn off the scanner, press the Power Switch button for about 3 seconds, the Power LED will be off.
2-3
2.2.2 Installing the Scanner Driver
NOTE:
To ensure your computer can identify the USB scanner, please install scanner driver first before connecting the scanner to your computer.
1.Place the supplied CD-ROM onto your CD-ROM drive.
2.The software installation graphic appears. If not, run
“setup.exe”.
Contents on the installation graphic:
yInstall Button Manager: To use the buttons on the scanner, you need to install Button Manager. To ensure Button Manager works properly, please FIRST install Button Manager before installing the scanner driver.
2-4
User’s Manual
—
yInstall Scanner Driver: To communicate with your scanner, you need to install the scanner driver. After installing the Button Manager software, click
Install Scanner Driver to install the scanner driver on your computer.
yInstall Adobe Reader: To view the user’s manuals for the scanner and Button Manager, you need to use Adobe Reader to open and view the manuals in pdf file format. If you already have Adobe Reader installed on your computer, you may disregard this item.
yView Manual: Click “View Manual” to view or print the detailed user manual for the scanner and Button Manager respectively.
3.Click Install Button Manager to install the Button Manager software and then click Install Scanner Driver to install the scanner driver on your computer.
2-5
2.2.3 Connecting to Computer
1.Connect the square end of the USB cable to the USB port of your scanner. Connect the rectangle end to the USB port of your computer.
2.The computer should detect a new USB device and prompt a “New Hardware Found” message.
3.In Windows 2000, confirm that the “Search for a better driver.” is selected and click the “Next” button.
In Windows XP, click the Next button to continue. When the XP certification screen appears, click Continue Anyway to complete the installation.
4.When the Finish dialog is prompted, click the Finish button.
Note:
9To uninstall the scanner driver in Windows XP, be sure to keep your scanner connecting to your computer.
9The rectangle USB port on the product is a USB hub, capable to connect Avision’s sheetfed scanners together with the dual driver.
2-6
User’s Manual
3. Completing Your First
Scan
3.1Loading Your Paper
Open the document cover then place your original face down on the document glass as shown in Fig. 3-1.
Make sure the top of your original near the document alignment mark.
1
|
2 |
3 |
|||
|
4 |
||||
1.Document cover
2.Document alignment mark
3.Your original
4.Document glass
Figure 3-1 Placing the original
3-1
3.2Verifying Your Scanner Installation
To verify if your scanner installation is correct, Avision provides you a useful test program called Avision Capture Tool. With this tool, you can perform simple scans and view the captured images. In addition, it helps you complete your scan at a rated speed.
The following procedure describes how to verify your scanner installation. If the installation is not correct, please review the preceding section to check if the cable connection and scanner driver have been successfully installed.
Before you begin, be sure the scanner is on.
1.Select Start>Programs>Avision AVxxx Scanner>Avision Capture Tool.
Note: If Avision Capture Tool does not appear on “All Programs” of your Start menu, please access from the following path:
CWindowsTWAIN_32AvisionAvxxxAvision Capture Tool.exe
The Select Scanner Model dialog box will be displayed.
2.Select your driver type and scanner model and click OK. The following Avision Capture Tool dialog box will be displayed.
3-2
User’s Manual
Fit Actual
Page Size
|
Setup Scan File Format |
Save |
File Path |
||
3.Choose your desired file format from the File Format drop down list box. (Default is BMP, other choice includes TIFF, MTIFF, PDF, MPDF, GIF, and JPEG.) The supported file formats vary depending on your scanner model.
4.Type your desired folder name and file name in the File Path box. (Default is C:My ScanImage.)
Note: If you do not wish to save the scanned image, deselect the Save button since default is Save Enable. In this case, the thumbnail view will be disabled. And therefore, after viewing all the scanned images, only the last one will remain on the screen.
5.Click the Setup button (
) or choose Setup from the File menu to prompt the Scanner Properties dialog box.
3-3
Image
Selection
Box
6.From the Image Selection Box, choose your desired image type for your scanned image. (Default is Front B&W) If you have a duplex scanner, choose Front and Rear to scan both sides of your document.
7.Click OK to quit the Scanner Properties dialog box. (To learn more details about the Scanner Properties dialog box, please see the subsequent chapter, Using the Scanner Properties Dialog Box.)
8.Place your document face down on the document glass or face up in the auto document feeder.
9.In the Scan Validation dialog box, click the Scan button (
) or choose Scan from the File menu.
10.The document will be scanned and displayed in the Scan Validation screen. After the scanned images have been displayed, your scanner installation verification is completed.
3-4
User’s Manual
Thumbnail View
11.You can view the scanned image in Fit Page (
) or Actual Size (100%) button (
) from the Viewing toolbars at the right side.
12.Click the Close box or Quit from the File menu to exit the Scan Validation Tool.
3-5
3.2.1 A Glance of the Scanner Properties Dialog Box
|
1 |
|||||||||||||
|
2 |
|||||||||||||
|
3 |
|||||||||||||
|
4 |
|||||||||||||
|
5 |
|||||||||||||
|
6 |
|||||||||||||
|
7 |
|||||||||||||
8
|
1. |
Tab Options |
Choice: Image, Compression, Color Dropout, |
|
Paper, Options, Settings, Information. |
||
|
2. |
Image |
Choose your image type and the side of |
|
Selection Box |
document you wish to scan. Options vary |
|
|
based on type of scanner. |
||
|
3. |
Brightness: |
Adjust the brightness level from –100 to +100. |
|
4. |
Contrast |
Adjust the contrast level from –100 to +100. |
|
5. Resolution |
Determine the quality of the scanned image. |
|
|
The industry standard is 200 dpi. |
||
|
6. |
Invert |
Reverse the color of your scanned image. |
|
7. |
Scan Source |
Choice: Auto Document Feeder, Flatbed, |
|
Flatbed (Book), Automatic (varies due to |
||
|
different scanner model) |
||
|
8. |
Defaults |
Reset all values on the tabs to the factory |
|
default settings. |
3-6
User’s Manual
4. Using the Scanner
Properties Dialog Box
The Scanner Properties dialog box allows you to configure the scanner’s settings. It consists of several tabbed windows each of which will be described in this chapter.
The Scanner Properties dialog box
4-1
4.1Buttons on the Scanner Properties Dialog Box
The buttons on the Scanner Properties dialog box
Buttons
Defaults
Scan
Close
Description
Click the Defaults button, the factory default settings will be shown on each tab.
After all the scan settings are satisfactory, click the Scan button to start scanning your document.
Click the Close button to leave the Scanner Properties dialog box.
4-2
User’s Manual
The following table shows the default settings
|
Tab name |
Default settings |
|
Image |
Image Front B&W |
|
Binarization Dynamic Threshold |
|
|
Resolution 200 dpi |
|
|
Invert Blank on White |
|
|
Scan Source Auto Document Feeder |
|
|
Threshold None |
|
|
Brightness None |
|
|
Contrast None |
|
|
Compression |
None |
|
Color Dropout |
None |
|
Paper |
Cropping Automatic |
|
Deskew Yes |
|
|
Orientation Portrait |
|
|
OverScan 0.00 |
|
|
Multifeed Detection None |
|
|
Unit Inch |
|
|
Options |
Rotation Degrees None |
|
Blank Page Removal None |
|
|
Edge Fill White 0 mm |
|
|
Image Control Option None |
|
|
Setting |
Enable Energy Saver Enable, 15 |
|
minutes after last scan action |
|
|
Show Scanning Progress Yes |
|
|
Show Warning Message Yes |
|
|
Save Settings after Closing Yes |
|
4-3
4.2The Image Tab
The Image tab allows you to choose the front side and (or) the rear side of your document, the type of image, and to set several basic scan settings. Note that except for the resolution, you can set individual scan settings for the front side and the rear side. For example, all settings in the Image tab, Compression tab, Color Dropout tab can be set individually for the front and the rear side. However, the settings in the Paper tab, the Option tab, and the Setting tab have to be set the same for the front and rear side.
The Image tab dialog box
4-4
User’s Manual
4.2.1 The Image Selection Box
The Image Selection box inclu the image type and document s option. If you wish to scan both front side and the rear side of y color document, you can check b Front Color and Rear Color at same time. Note the options v based on type of scanner.
Example 1 Scanning a two-sided color document, both sides in color
|
Side/Image |
Front |
Rear |
|
|
Selection |
|||
4-5
Example 2 Scanning a two-sided color document, one in B&W(Drop Blue Color Threshold 10, Background
79), the other in color
|
Side/Image |
||||||
|
Selection |
Front |
Rear |
||||
|
Image Type |
Description |
|||||
|
Color |
Choose Color if you wish to scan a color |
|||||
|
image for your original in color. |
||||||
|
Gray |
Choose Gray image if your original contai |
|||||
|
actual shades of gray. |
||||||
|
B&W |
Choose B&W if your original contains only |
|||||
|
text, pencil or ink sketch. |
||||||
4-6
User’s Manual
Front/Rear Auto Color Detection:
Click to automatically detect and scan the front or the rear page of your color document in color image mode. If your document is in colors, the scanner will automatically scan the document into a color image. If your document is non-color, you can choose the output to be either B&W or Gray from the Non-Color Selection option. This option is useful when you have a mixture of color and non-color document.
Note: If you choose Front Rear Auto Color Detection, you can not specify the image mode of your rear page and vice versas.
Sensitivity of Auto Color Detection
If your documents contain primarily B&W text and small amount of light or pale colors and you do not wish them to be recognized as color image to save the file size, you can reduce the sensitivity value by moving the bar to the left to let these images to be detected as B&W. The value ranges from 1 to 30. The default is 20.
4-7
4.2.2 Other Image Options
Binarization This is the process of converting a grayscale or color image to a bi-tonal image. There are several different methods of performing this conversion.
Options: Dynamic Threshold, Fixed Processing, Halftone 1~5, Error Diffusion.
Dynamic Threshold: Selecting Dynamic Threshold allows the scanner to dynamically evaluate each document to determine the optimal threshold value to produce the highest quality image. This is used to scan mixed document containing faint text, shaded background, or color background with a single setting. If Dynamic Threshold is selected, Threshold, Brightness, and Contrast are not available.
Sensitivity of Dynamic Threshold
Occasionally your scanned image may contain small dots or speckles. To remove these spots, increase the sensitivity value by moving the bar to the right. The value ranges from 1 to 30. The default is 20.
4-8
User’s Manual
Fixed Processing: Used for black-and- white and other high contrast documents. A single level is set to determine the black- and-white transition. The threshold is programmable over the entire density range. Fixed Processing sets Contrast to 0. If Fixed Processing is selected, Contrast is not available.
Halftone: In addition to the black and white display, Halftone can present a somehow gray shade of image by using different size of dots. Halftone image looks like the picture we have seen in the newspaper. Options include Halftone 1,
Halftone 2, Halftone 3, Halftone 4, Halftone 5.
Error Diffusion: Error Diffusion is a type of Halftone. Error Diffusion gives good image texture and makes text in images more readable than Halftone.
Halftone Image
4-9
Error Diffusion Image
4-10
User’s Manual
Threshold Used to convert a grayscale image to a bi-tonal image. The value ranges from 0 to 255. A low threshold value produces a lighter image, and can be used to subdue backgrounds and subtle, unneeded information. A high threshold value produces a darker image, and can be used to help pick up faint images.
Adjust the threshold setting by dragging the Threshold sliding bar to the left or right to achieve the desired threshold setting.
|
200 dpi, |
200 dpi, |
|
|
Threshold:80, |
Threshold:170, |
|
|
Brightness: 0 |
Brightness: 0 |
4-11
Gray
Document Type: Choice: Normal, Photo, Document
Three options of document type are provided when you choose Gray as the image type for your scanned document. Choice: Normal, Photo, Document.
•Document: Choose Document if your original contains pure text or a mixture of text and graphic since it is an optimal setting for regular business document. When using Document, only Threshold can be adjusted.
•Photo: Choose Photo if your original contains photo to reproduce your photo in vivid grayscale image. When using Photo, no Threshold and Contrast can be adjusted.
•Normal: When using Normal, Threshold, Brightness, and Contrast can be adjusted.
Threshold: The value ranges from 0 to 255. The default is 230. A low threshold value produces a lighter image, and can be used to subdue backgrounds and subtle, unneeded information. A high threshold value produces a darker image, and can be used to help pick up faint images. Adjust the threshold setting by dragging the Threshold sliding bar to the left or right to achieve the desired threshold setting.
4-12
User’s Manual
|
Normal |
Photo |
Document |
|
(Threshold: 230) |
|
Normal |
Photo |
Document |
|
(Threshold: 230) |
4-13