Batman arkham asylum ошибка general protection fault

Go to your steam library, right click on Arkham Asylum, click on properties, go to the updates tab, then look under steam cloud and make sure « Enable Steam Cloud synchronization for Batman: Arkham Asylum… » is checked. If it’s not, click the box beside it and check it before saving. Then close and try the game again.

in addition, How do I fix Arkham Asylum Microsoft Net Framework?

Batman: Arkham Asylum GOTY Edition

NET Framework Error SOLVED! after some searching and trial and error i have found an easy solution that worked for me. go to control panel and start by uninstalling Nvidia PhysX from your programs. it should work without error after that, did for me anyways.

Also, How do I fix general protection fault error?

How Do I Fix General Protection Fault Errors?

1. Delete Temporary Files. Temporary files stored on your machine may cause GPF errors by forcing programs to access other memory portions. …
2. Delete Files Your No Longer Need. …
3. Run SFC and DISM. …
4. Run the Program in Compatibility Mode.

in the same way How do you fix the fatal error on Batman Arkham City?
Try these fixes

1. Verifying game files.
2. Update the GPU driver.
3. Disable third-party graphic tools.
4. Stop overclocking.
5. Rename your DLL files.
6. Turn off smoke/fog.

How do I fix Arkham origins 0xc00007b?

For example 32bit application loads a 64bit dll causing 0xc000007b error.

1. Solution 1 In most cases it’s .NET framework causing issues. …
2. Solution 2 Re-install the application that you are trying to run. …
3. Solution 3 Running the application as an administrator could fix this error.

---

What causes general protection fault?

General protection faults are raised by the processor when a protected instruction is encountered which exceeds the permission level of the currently executing task, either because a user-mode program is attempting a protected instruction, or because the operating system has issued a request which would put the …

What is GPF computer?

A General Protection Fault (GPF) is a Windows system error message. A GPF is not an error within an application, but an error in the Windows operating system itself. A GPF typically occurs when the active application is reading or writing to a section of RAM that is unavailable at that time.

How do I fix Arkham Knight crash?

Batman: Arkham Knight is crashing on my PC.

1. System Requirements.
2. Minimum System Requirements.
3. Recommended System Requirements.
4. ULTRA System Requirements.
5. Update Drivers.
6. Third Party Graphic Mods/Tools.
7. Corrupted or incorrect DirectX installation.
8. Overclocking or Turbo Boosting a processor/GPU.

Why does Batman: Arkham Knight keep crashing Xbox one?

If Batman: Arkham Knight is crashing on your game console, it often indicates a problem with your game install.

Does Batman Arkham City work on Windows 10?

Now, beginning with Batman: Arkham Knight, every Game Ready WHQL driver will be offered simultaneously on Windows 10 and other Windows operating systems.

How do I stop Batman Arkham origins from crashing?

To disable DX11:

1. Locate BmEngine.ini: Steam steamapps common Batman Arkham Origins SinglePlayer BMGame Config BmEngine.ini.
2. Open BmEngine.ini with NotePad.
3. Locate « AllowD3D10=False » and change False to True.
4. Locate « AllowD3D11=True » and change True to False.
5. Save file and restart computer.

What is 0xc0000906?

The 0xc0000906 error code is often linked to instances where the system previously suffered some alterations (like an OS upgrade, a security scan that ended up quarantining some items or an unexpected machine interruption).

Can Batman Arkham City run on Windows 10?

Now, beginning with Batman: Arkham Knight, every Game Ready WHQL driver will be offered simultaneously on Windows 10 and other Windows operating systems. … Our engineers are providing drivers, working with game engine providers, and co-developing with Microsoft.

Is Batman Arkham Knight PC fixed?

Batman: Arkham Knight PC Gets User Made Fix for Stuttering and Frame Pacing Issues. … The new fix has been created by SherielFarouk fixes the texture streaming system that causes stuttering issues by creating a texture pool on top of D3D11, so that textures can be reused.

Is Batman Arkham Knight still broken on PC?

Batman: Arkham Knight is still broken on PC, so WB is offering full refunds – The Verge.

How do you fix the fatal error on Batman Arkham Origins?

Solution: delete BMEngine. ini from SinglePlayer/BMGame/Config. Fatal Error!

Is return to Arkham 60fps?

Batman Return To Arkham – Arkham City Can Hit 60 FPS When Running On PS5. Batman: Return to Arkham is one of many games that are backwards compatible for PS5, but there’s a hidden performance boost for those who own the disc version and don’t update it. This will allow you to play Batman Arkham City at 60 FPS.

Is Batman return to Arkham the same as Arkham City?

Batman: Return To Arkham is a remastered version of the first two Arkham games—Arkham Asylum and Arkham City. The bundle also includes all of the DLC for those games.

Why does my Batman Arkham City keep crashing?

Users have reported crashes with Batman: Arkham City as soon as they launch the game, and it was discovered that PhysX was the main cause for these crashes. In order to fix this issue you need to go to Nvidia’s website and download the latest PhysX drivers and install them manually.

Can my laptop play Arkham City?

Publishers :	Feral Interactive (Mac) Warner Bros. Interactive Entertainment
Batman : Arkham City Release Date : 7th of September 2012

Can I play Batman Arkham City on my laptop?

Batman: Arkham City requires at least a Radeon HD 6790 or GeForce GTX 460 768MB to meet recommended requirements running on high graphics setting, with 1080p resolution. This hardware should achieve 60FPS. Also your PC needs 4 GB RAM to meet the rec specs and run at 60 frames.

Why is Batman Arkham origins not on Epic Games?

Six Batman games for the low price of free.

Arkham Asylum, Arkham City, and Arkham Knight can all be picked up in this collection. Batman: Arkham Origins is not included in this collection, possibly because it was developed by Warner Bros. Montreal instead of Rocksteady.

How do I download Arkham Origins on Steam?

Instructions

1. Click the Download button below and you should be redirected to UploadHaven.
2. Once Batman: Arkham Origins is done downloading, right click the . zip file and click on “Extract to Batman Arkham Origins. …
3. Double click inside the Batman: Arkham Origins folder and run the exe application.

What is error 0xc00000e5?

Application error 0xc00000e5 is an error that usually occurs when trying to open different software or browsers. One of the common reasons behind this error may be a third-party anti-virus program falsely detecting a non-malicious file as if it were infected. … An application may stop responding when this error occurs.

How do I fix error oxc0000906?

How do I fix Windows Application error 0xc0000906?

1. Turn off third-party antivirus software. …
2. Turn off Windows Defender. …
3. Run the software in compatibility mode. …
4. Run a System File Checker scan. …
5. Roll back Windows 10 to a restore point. …
6. Reinstall the software.

How do I fix entry point not found?

Fix ‘entry point not found’ errors in Windows

1. System File Check. System File Check is a built-in Windows utility that scans the OS installation for missing or corrupt files. …
2. Manually install the DLL file. …
3. Install the program that includes the file. …
4. Reinstall the program throwing the error.

• Reference 1
• Reference 2
• Reference 3
• Reference 4

Batman arkham asylum general protection fault windows 10

This fix works for me, after trying countless solutions this was the only one that got the game running. Hope it works for you. Very simple fix.

Deleting save0 seems to work. It usually crashes when leaving the Visitor Center.
My 100% save0 keeps coming back, most likely due to cloud linking. It would probably stop if it is disabled.

I found a fix for my self, with the exact same issue as stated above. Go to this link and download this, make sure that the bing tool bar is unchecked, because nobody likes bing anyways. lol
http://www.microsoft.com/en-us/download/details.aspx?id=35
I then went here (Whatever drive you have it downloaded toSteamLibrarysteamappscommonBatman Arkham Asylum GOTYredist(I just clicked on browse local files in the games Steam properties, by right clicking it in my Steam Games Library)
From there, double click and install PhysX_9.08.14_9.09.0814_SystemSoftware, and vcredist_x86. Then, go into the DirectX folder and scroll down until you see DXSETUP. Run and install that, and the game should work. Please let me know if it worked. Lots of head ache went into finding this fix.

Thank you for your effort!

This worked perfectly. I didn’t do the first step, downloading the DX runtime web installer, or whatever it was, as the page specified it was for Windows 7 (and older) while I’m running Windows 10. But installing the PhysX software, the Visual C redistribution, and the DXSETUP within that directory was apparently enough to fix my issue.

Источник

Batman arkham asylum general protection fault windows 10

Fix the problem or refund my game. I shouldn’t have to be fixing your bugs for you.

It says General Protection Fault. Missing nvcuda.dll, missing some other dll, I dont know because the way your interface is set up its impossible to type stuff into this box while the error message is setup. So good luck trying to fix my problem when you make it impossible for me to tell you what it is.

Refund my game. Nobody else buy it until they fix my problem. There is NO REASON why it should work yesterday and then randomly stop working today.

General protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD:42200/42200 Game

cuD3D11 CtxCreate() Address = 0x5e817d2e (filename not found) [in C:Windowssystem32nvcuda.dll]
cuD3D11 CtxCreate() Address = 0x5e83d1ab (filename not found) [in C:Windowssystem32nvcuda.dll]
cuD3D11 CtxCreate() Address = 0x5e7a1e2d (filename not found) [in C:Windowssystem32nvcuda.dll]
cuEventDestroy() Address = 0x5e7983f2 (filename not found) [in C:Windowssystem32nvcuda.dll]
NiGetApexSDK() Address = 0x35eee83 (filename not found) [in C:Program Files(x86)SteamsteamappscommonBatman Arkham Asylum GOTYBinariesAPEX_release.dll]
NiGetApexSDK() Address = 0x35f1b65 (filename not found) [in C:Program Files(x86)SteamsteamappscommonBatman Arkham Asylum GOTYbinariesAPEX_release.dll]

don’t buy this game because its just gonna stop working randomly for no reason after you are just starting to have fun.

Источник

Batman arkham asylum general protection fault windows 10

I bought this game 3 days ago. After I installed and started the game, I opened a new profile and tuned the brightness. Right after I pressed the continue and it introduced the saving process icon to me, the game crashed.
It says General Protection Fault. Missing nvcuda.dll, missing some other dll.
Mainly nvcuda.dll and APEX_release.dll.
I have reinstalled my Nvidia drivers but it cannot be solved.

Please suggest and help! Thx!

So I was having the same issue and tried quite a few of the other solutions I saw people posting with no results.

Finally I turned on «Show PhysX Visual Indicator» under the 3D setting on the NVIDIA control panel and when I booted the game up I noticed that it was trying to load PhysX through the CPU even though in my NVIDIA settings I had it set to the GPU. I exited the game and set PhysX to load through the CPU instead and restarted the game and voila it loaded without a problem.

General protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 198404 23-01-2010 21:41.02 FMOD: 42200/42200 Game

memcpy() Address = 0x730b500a (filename not found) [in C:WINDOWSWinSxSx86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.8428_none_d08a11e2442dc25dMSVCR80.dll]

and a bunch like
GetStackOwnerClass () Address = 0x17262a7 (filename not found) [in D:SteamLibrarysteamappscommonBatman Arkham Asylum GOTYBinariesShippingPC-BmGame.exe]

I have an intel i5 CPU and AMD HD 7800

So I was having the same issue and tried quite a few of the other solutions I saw people posting with no results.

Finally I turned on «Show PhysX Visual Indicator» under the 3D setting on the NVIDIA control panel and when I booted the game up I noticed that it was trying to load PhysX through the CPU even though in my NVIDIA settings I had it set to the GPU. I exited the game and set PhysX to load through the CPU instead and restarted the game and voila it loaded without a problem.

THANK YOU THANK YOU THANK YOU

I changed PhysX processing to CPU and it ran just fine. I didn’t have this problem until after restarting the game after the first Scarecrow encounter. I still had the problem after turning off PhysX in the game options, but changing PhysX to the CPU fixed it!

Источник

Batman arkham asylum general protection fault windows 10

Okay, so I got myself a new gaming rig with Windows 10 on it, and I’m having some trouble even getting past the start screen.
Soon as I press Start, it hangs and then crashes immediately, no matter what my settings: tried setting PhysX to the CPU as well, and that made no difference.

A lot of apparent problems with the «ShippingPC-BMGame.exe» executable, but all pretty vague as to what the actual problem is.

Can you show the whole crash output?

Physx should either be set to Auto-select or the GPU of your choice.
There are a few reports of physx related issues when the legacy physx that came with the game is not installed. You can have multiple versions of physx installed concurrently, so even if you have the latest NVIDIA drivers and/or physx system software you should install the older version that was distributed with the game.

Beyond that do all the usual, upgrade/reinstall drivers and redistributables stuff.

Can you show the whole crash output?

Physx should either be set to Auto-select or the GPU of your choice.
There are a few reports of physx related issues when the legacy physx that came with the game is not installed. You can have multiple versions of physx installed concurrently, so even if you have the latest NVIDIA drivers and/or physx system software you should install the older version that was distributed with the game.

Beyond that do all the usual, upgrade/reinstall drivers and redistributables stuff.

Here’s a screengrab [www.dropbox.com]
Doesn’t work with auto-select, it seems, nor with anything else.
But I’m not sure PhysX is even the problem here: in fact, I don’t know what actually is since the error is worded so vaguely.
Upgraded my video drivers today, installed the redistributable stuff in the AA folder (as far as was possible), but that didn’t seem to make much of a difference either.

I can’t get at the file. I don’t use dropbox but the link doesn’t show me a picture, it just goes to my own very not used dropbox.

I wouldn’t assume physx either unles you see a physx file implicated in the crash.

I can’t get at the file. I don’t use dropbox but the link doesn’t show me a picture, it just goes to my own very not used dropbox.

I wouldn’t assume physx either unles you see a physx file implicated in the crash.

I am on Windows 10 too and I find when you start the game from your start menu not through steams main screen, you have to click on the main desktop to close the start menu to start the game without faults.

Then I’ll give you the plain text

General protection fault!
History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD: 42200/42200 Game
GetStackOwnerClass() Address = Ox17261f6 (filename not found) [in I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTABinaries ShippingPC-BmGame.exe]
GetStackOwnerClass() Address = Ox1728cd8 (filename not found) [in 1:GameASteamlibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe]
GetStackOwnerClass() Address = Ox1721a61 (filename not found) [in I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe]
GetOutermost() Address = Ox637bf5 (filename not found) I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe]
GetStackOwnerClasso Address = Ox1503ebc (filename not found) [in IAGames SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe] Address = Ox53dfcl (filename not found) [in 1:Games Steamlibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe] Address = Ox58ff15 (filename not found) [in I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe]
GetStackOwnerClasso Address = Ox16fa2be (filename not found) [in I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe] Address = Ox5a6d72 (filename not found) [in I: Games SteamLibrary SteamApps common Batman Arkham Asylum GOTY Binaries ShippingPC-BmGame.exe]

That’s what i’m looking for. Unfortunately, without debugging symbols this doesn’t really tell us anything useful. The whole «filename not found» is a bit misleading, it doesn’t mean a file’s missing, it means that can’t find the debugging symbols needed to tell us more about what the code was doing.

Outside of giving very blade basic «upgrade/reinstall stuff/do cache checks» I can’t give you any other suggestions except maybe to contact WB support and hope they actually have some sort of clue. (not saying this to be rude, but in my own experience their frontline support was pretty much useless, told me to do things I explicitly stated i already did, and then quietly dropped support when they ran out of ideas and wouldn’t respond to me anymore.)

That’s what i’m looking for. Unfortunately, without debugging symbols this doesn’t really tell us anything useful. The whole «filename not found» is a bit misleading, it doesn’t mean a file’s missing, it means that can’t find the debugging symbols needed to tell us more about what the code was doing.

Outside of giving very blade basic «upgrade/reinstall stuff/do cache checks» I can’t give you any other suggestions except maybe to contact WB support and hope they actually have some sort of clue. (not saying this to be rude, but in my own experience their frontline support was pretty much useless, told me to do things I explicitly stated i already did, and then quietly dropped support when they ran out of ideas and wouldn’t respond to me anymore.)

Источник

batman arkham asylum general protection fault

При включении игры
выдаёт ошибку General Protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 177051 19-08-2009 13:45.35 FMOD: 42200/42200 GAME

RaiseException() Address = 0x7c812aeb (filename not foud)
GColor ::GetHSI() Address = 0x1c66300 (filename not foud)
GColor:: GrHSI() Address = 0x1aa5ded (filename not foud)

характеристики компа процессор Intel core2 squad 4 ядра по 2.5гц 3 гига оперативки видеокарта GeForce GTX 260

The game crashes on the first screen when I clic to start the game

I have Windows 8.1 x64 and Arkham Asylum GOTY Edition

(I already verified the game integrity via Steam and it sais OK)

Here is the error message (in case you cannot access the image)

Message General protection fault! History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD: 42200/42200 Game GetStackOwner >
Here is the SOLUTION :
There is a problem with steam savegames in the cloud.
Pallado proposed the solution here : http://steamcommunity.com/app/35140/discussions/0/630799997547668382/

I quote :
«Start the game, use alt-tab, delete the 35140 folder in «Steamuserdata » if you’re playing Batman Arkham City GOTY Edition, go back in the game and create new saves.

If this does not work, I don’t know what will. «

Batman: Arkham Asylum GOTY Edition

Have 24 hrs of game time in. Got a glitch when going into the glass house, nothing worked and nothing in there and couldnt reload or get out. When I quit I searched for a fix, tried a few nothing worked — So uninstalled, redownoaded and reinstalled game — now get this message each time after loadup before picking savegame and it shuts down.
PLEASE help — dont know what else to try.

General protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD: 42200/42200 Game

strnicmp() Address = 0x67a172d7 (filename not found) [in C:WINDOWSWinSxSx86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9554_none_d08d6fa2442aa556MSVCR80.dll]
strnicmp() Address = 0x67a17344 (filename not found) [in C:WINDOWSWinSxSx86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9554_none_d08d6fa2442aa556MSVCR80.dll]
GetStackOwner >GetStackOwner >GetStackOwner >GetStackOwner >

Kippd, never uninstall and reinstall unless you know from reference that doing so will fix a specific problem; more often than not it’s a waste of time. Instead patch and verify your game, which should be done with any Steam game immediately after installing and before playing:
1. Select game in Steam Library, right-click Properties, then Updates to choose Automatic Updating and to Allow Background Downloads.
2. Select game in Steam Library, right-click Properties, then Local Files and Verify Integrity of Game Cache.

Tell us what remedies you’ve tried thus far so we don’t retread solutions. Also, whenever you ask for tech advice, always list your PC specs including system (32-bit or 64-bit) and RAM; Windows OS (7, 8.1, 10); NVidia driver series if equipped; video card including VRAM. You provided the error message so at least that’s a start.

There’s 2 MSVCR80 notes in your error message, did you try the vcredist installer?
Steam steamapps common Batman Arkham Asylum GOTY redist vcredist_x86

Источник

На чтение 3 мин. Просмотров 109 Опубликовано 15.12.2019

При включении игры
выдаёт ошибку General Protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 177051 19-08-2009 13:45.35 FMOD: 42200/42200 GAME

RaiseException() Address = 0x7c812aeb (filename not foud)
GColor ::GetHSI() Address = 0x1c66300 (filename not foud)
GColor:: GrHSI() Address = 0x1aa5ded (filename not foud)

характеристики компа процессор Intel core2 squad 4 ядра по 2.5гц 3 гига оперативки видеокарта GeForce GTX 260

The game crashes on the first screen when I clic to start the game

I have Windows 8.1 x64 and Arkham Asylum GOTY Edition

Don’t know what to do ..

(I already verified the game integrity via Steam and it sais OK)

Here is the error message (in case you cannot access the image)

Message General protection fault! History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD: 42200/42200 Game GetStackOwner >
Here is the SOLUTION :
There is a problem with steam savegames in the cloud.
Pallado proposed the solution here : http://steamcommunity.com/app/35140/discussions/0/630799997547668382/

I quote :
«Start the game, use alt-tab, delete the 35140 folder in «Steamuserdata » if you’re playing Batman Arkham City GOTY Edition, go back in the game and create new saves.

If this does not work, I don’t know what will. «

Batman: Arkham Asylum GOTY Edition

Have 24 hrs of game time in. Got a glitch when going into the glass house, nothing worked and nothing in there and couldnt reload or get out. When I quit I searched for a fix, tried a few nothing worked — So uninstalled, redownoaded and reinstalled game — now get this message each time after loadup before picking savegame and it shuts down.
PLEASE help — dont know what else to try.

General protection fault!

History: QA_APPROVED_BUILD_OCTOBER_2008 198408 23-01-2010 21:41.02 FMOD: 42200/42200 Game

strnicmp() Address = 0x67a172d7 (filename not found) [in C:WINDOWSWinSxSx86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9554_none_d08d6fa2442aa556MSVCR80.dll]
strnicmp() Address = 0x67a17344 (filename not found) [in C:WINDOWSWinSxSx86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.9554_none_d08d6fa2442aa556MSVCR80.dll]
GetStackOwner >GetStackOwner >GetStackOwner >GetStackOwner >

Kippd, never uninstall and reinstall unless you know from reference that doing so will fix a specific problem; more often than not it’s a waste of time. Instead patch and verify your game, which should be done with any Steam game immediately after installing and before playing:
1. Select game in Steam Library, right-click Properties, then Updates to choose Automatic Updating and to Allow Background Downloads.
2. Select game in Steam Library, right-click Properties, then Local Files and Verify Integrity of Game Cache.

Tell us what remedies you’ve tried thus far so we don’t retread solutions. Also, whenever you ask for tech advice, always list your PC specs including system (32-bit or 64-bit) and RAM; Windows OS (7, 8.1, 10); NVidia driver series if equipped; video card including VRAM. You provided the error message so at least that’s a start.

There’s 2 MSVCR80 notes in your error message, did you try the vcredist installer?
Steam steamapps common Batman Arkham Asylum GOTY redist vcredist_x86