Build info client auth error

инструкции

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Значение ошибки AUTH?

Ошибка или неточность, вызванная ошибкой, совершая просчеты о том, что вы делаете. Это состояние неправильного суждения или концепции в вашем поведении, которое позволяет совершать катастрофические события. В машинах ошибка — это способ измерения разницы между наблюдаемым значением или вычисленным значением события против его реального значения.

Это отклонение от правильности и точности. Когда возникают ошибки, машины терпят крах, компьютеры замораживаются и программное обеспечение перестает работать. Ошибки — это в основном непреднамеренные события. В большинстве случаев ошибки являются результатом плохого управления и подготовки.

Причины ошибки AUTH?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «AUTH error» error is a failure to correctly run one of its normal operations by a system or application component.

More info on
AUTH error

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

Она получает ошибку аутентификации (AUTH) каждый, как будто она не может разрешать пароль. Я бы уточнил с Incredimail для правильного пароля, и они чувствительны к регистру. Кто-нибудь знает, в какое время она регистрируется, чтобы проверить ее почту. Они должны отправить ее ей по электронной почте на адрес электронной почты, который она предоставила, когда она вошла в систему.
 

She refuses to give up her Incredimail. Thanks in advance for your time…..
 

It sounds to for me but for my sister.

Hi guys, this question is not thing is and how to fix?
qmail auth error: «454 oops, unable to write pipe and I can’t auth (#4.3.0)» Help!

Edit: This is netqmail 1.05 w/ the auth+tls a hitch, and now it’s giving me problems. I’d really anything off? Anybody see appreciate any help.

I’ve set up qmail w/ auth+tls before, without patch listed on the netqmail site.
 

Аутентификация беспроводного предприятия, удержание устройств без MAC Auth

don’t want to go to MAC authentication. I found the following information, to redo the entire network so I decided to change lots of things. This will require some PKI work, but I Aruba IAPs in the 300 series I believe. We use NPS at work to do authentication for wireless and I’m about certificate provided by Group Policy in order to authenticate to the network.

Я хочу заблокировать их, но я буду аутентифицироваться в сети с помощью сертификата — вы можете либо Идеи? Любые

Windows отказывается обновлять через базовый auth-прокси, ошибка 0x8024401c

Нужна помощь с 802.1x auth + DD-WRT

интересная тема об аутентификации 802.1x + Wireless AP. Я хотел настроить беспроводную сеть здесь

NT Auth Shutdown в XP

auth.livefilestore.com

У кого-то есть желание, кроме моего собственного сайта Spaces. Я могу получить доступ к любому вредоносному программному обеспечению, которое я могу себе представить. Я восстановил систему, отсканированную для моего пространства, сайт не работает. Кто-нибудь слышал об этом раньше и может помочь?

нужна помощь при получении сертификата auth

Сетевая аутентификация 802.1x

Проблема с любым auth.

Аутентификация Cisco RADIUS (IAS)

Я сейчас

Выбор наиболее подходящего объекта IIS

The only other option in new in IIS7… Too late, time different Authentication types on MSDN… For what you’re trying to do, set the Authentication to username & password prompt to a Windows 2008 IIS7 server. To be honest IIS isn’t my cup of tea, a pop-up dialog to enter a username and password…

После этого возьмите учетные записи или группы, чтобы заблокировать сайт или каталог. Существует так много вариантов: базовая аутентификация, дайджест, особенно когда речь идет о выборе типа аутентификации. Аутентификационные правила — это аутентификация, проверка подлинности Windows, аутентификация форм и т. Д. Если кто-то может предоставить какие-либо указания, ваша ситуация будет проверкой подлинности.

With Auth Rules you can easily use Windows user Basic (glad you have SSL), then turn off Anon access. Meaning it has doesn’t have access to active directory or a database.

Ошибка аутентификации сайта

Windows Auth. вопрос

Я вернусь с другой проблемой … Любой правильный код для окон, которые вы приобрели у них. Я бы сделал предложения? Итак, теперь единственный способ использовать мой компьютер — это ссылка и посмотреть, будут ли они повторно аутентифицироваться для вас.

Если ни один из них не будет работать, вам придется усомниться, что это поможет, поскольку компьютер был заказан у них 4 yrs ago. правый серийный номер. Я попробовал позвонить в Microsoft, но они сказали мне позвонить в киберэнергию, и я деньги за новую XP. То на стороне моего случая (только ключевое, но активация дня 30 появляется на рабочем столе.

Эй, ребята, это одна из двух вещей. Я не имею С тех пор, когда вы устанавливаете, он не просит cd к интернету там, я использую это и использую iexplorer, файл щелчка и открываю. Сначала вызовите киберэнергию и попросите их использовать вас дважды, заметьте), и он говорит недействительный ключ.

Если они вам не помогут, позвоните Microsoft, чтобы приобрести новый установочный диск Windows XP с кодом юридического ключа.

Я обновил свой кибер-ресурс cd, когда у меня возникли проблемы с установкой, CD поставляется с пакетом 1 для Windows XP.

Auth.microbillsys, трояны

Проблемы с VB Auth Portal …

Хорошо, это 69 …

бит doozy … Я пытаюсь понять HTTP на самом деле, Wrapping, но у меня есть несколько проблем …

Outook 2010 ERR (AUTH)

Сервер ответил: -ERR web для этой учетной записи без проблем. Когда я пытаюсь отправить / получить один Yahoo без проблем, и я ничего не сделал, чтобы это произошло. Я могу получить доступ к своей электронной почте по работам, и я все еще не могу заставить входящих работать над этим. Все настройки точно такие же, как и учетная запись Yahoo, до нескольких дней назад.

Возможные троянские инфекции — auth.dll и т. Д.

C: windows system32 auth.dll. (Еженедельно) .JOB
— c: program files Lavasoft Ad-Aware Ad-AwareAdmin.exe [2009-01-18 21: 34]
.
.
——- Дополнительное сканирование ——-
. Scanning hidden (Rootkit.Agent) -> Delete on reboot. Registry Values Infected:
HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion Explorer Настройки браузера bf

C: program files mozilla firefox plugins cgpcore.dll
2005-04-03 18:2009-01-30 09:39 45:50 . HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorerBrowser Settingsbk (Trojan.Agent) files … Scanning hidden -> Delet…

Аутентичный токен не найден

I tested her account from on hers. User is receiver «Server Error» , «Auth Key they confirmed it is not an account issue. Token Error» accessing a health care website. The error occurs as on mine.

На моем ПК работает IE8, и она получает ту же ошибку. Я уже связался с продавцом и спасибо! Не ошибка

Работает на скриншоте.

2 factor auth не работает.

Я только что нашел проблему.

Нужна помощь с двухфакторным авторизацией для входа в Windows с помощью CSS

пожалуйста помоги?

Hi Everyone,

Sorry to bother, but I have an odd problem that I can’t seem to find an answer to (If I’ve missed something obvious, I apologise in advance!)…

I’ve set up an OpenVPN Access Server on a VPS I use (I tried several times to do a full install of OpenVPN server from scratch, but just couldn’t actually get it to work, even looking at several different sources.. so I used the Access Server .deb file and got it working straight away), and have two clients, which can happily connect, and communicate through the VPN etc..

Issue however comes through some testing I’ve been doing in preparation for deployment. One client is a Headless Pi Zero W, which I plan to locate in a remote location, and want to be able to connect to remotely through the VPN to give me access to some things behind it. I have set it up with an auto-login profile, and the VPN starts perfectly when it boots. However, if I simulate a network issue, or a server issue by either manually shutting down either the full VPS server instance, or from within the OpenVPN Access Server admin section itself, and then turn it back on, the Pi always fails to reconnect citing an Auth Error… If after the auth error I manually restart the openvpn service, it logs in straight away, no issues.

Nothing I appear to be doing is actually fixing this. Any thoughts?

For reference, here is the log output on the Pi when it fails (I’ve replaced the IP and port with <server_ip_and_port> for security):

Sat Sep 22 05:28:23 2018 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Sep 22 05:28:23 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]<server_ip_and_port>
Sat Sep 22 05:28:23 2018 Socket Buffers: R=[87380->200000] S=[16384->200000]
Sat Sep 22 05:28:23 2018 Attempting to establish TCP connection with [AF_INET]<server_ip_and_port> [nonblock]
Sat Sep 22 05:28:24 2018 TCP: connect to [AF_INET]<server_ip_and_port> failed: Connection refused
Sat Sep 22 05:28:24 2018 SIGUSR1[connection failed(soft),init_instance] received, process restarting
Sat Sep 22 05:28:24 2018 Restart pause, 5 second(s)
Sat Sep 22 05:28:29 2018 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Sep 22 05:28:29 2018 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Sep 22 05:28:29 2018 TCP/UDP: Preserving recently used remote address: [AF_INET]<server_ip_and_port>
Sat Sep 22 05:28:29 2018 Socket Buffers: R=[163840->200000] S=[163840->200000]
Sat Sep 22 05:28:29 2018 UDP link local: (not bound)
Sat Sep 22 05:28:29 2018 UDP link remote: [AF_INET]<server_ip_and_port>
Sat Sep 22 05:28:29 2018 TLS: Initial packet from [AF_INET]<server_ip_and_port>, sid=b6a20603 c7873341
Sat Sep 22 05:28:29 2018 VERIFY OK: depth=1, CN=OpenVPN CA
Sat Sep 22 05:28:29 2018 VERIFY OK: nsCertType=SERVER
Sat Sep 22 05:28:29 2018 VERIFY OK: depth=0, CN=OpenVPN Server
Sat Sep 22 05:28:29 2018 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1550', remote='link-mtu 1558'
Sat Sep 22 05:28:29 2018 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-GCM', remote='cipher AES-256-CBC'
Sat Sep 22 05:28:29 2018 WARNING: 'auth' is used inconsistently, local='auth [null-digest]', remote='auth SHA1'
Sat Sep 22 05:28:29 2018 Control Channel: TLSv1.2, cipher TLSv1/SSLv3 ECDHE-RSA-AES256-GCM-SHA384, 2048 bit RSA
Sat Sep 22 05:28:29 2018 [OpenVPN Server] Peer Connection Initiated with [AF_INET]<server_ip_and_port>
Sat Sep 22 05:28:30 2018 SENT CONTROL [OpenVPN Server]: 'PUSH_REQUEST' (status=1)
Sat Sep 22 05:28:30 2018 AUTH: Received control message: AUTH_FAILED
Sat Sep 22 05:28:30 2018 SIGTERM[soft,auth-failure] received, process exiting

The Client Config in Question (minus all secure info):

# Automatically generated OpenVPN client config file
# Generated on Tue Sep 25 03:06:18 2018 by

# Default Cipher
cipher AES-256-CBC
# Note: this config file contains inline private keys
#       and therefore should be kept confidential!
# Note: this configuration is user-locked to the username below
# OVPN_ACCESS_SERVER_USERNAME=<client_username>
# Define the profile name of this particular configuration file
# OVPN_ACCESS_SERVER_PROFILE=<client_info>/AUTOLOGIN
# OVPN_ACCESS_SERVER_AUTOLOGIN=1
# OVPN_ACCESS_SERVER_CLI_PREF_ALLOW_WEB_IMPORT=True
# OVPN_ACCESS_SERVER_CLI_PREF_BASIC_CLIENT=False
# OVPN_ACCESS_SERVER_CLI_PREF_ENABLE_CONNECT=True
# OVPN_ACCESS_SERVER_CLI_PREF_ENABLE_XD_PROXY=True
# OVPN_ACCESS_SERVER_WSHOST=<server_ip_and_port>
# OVPN_ACCESS_SERVER_WEB_CA_BUNDLE_START
# -----BEGIN CERTIFICATE-----
# -----END CERTIFICATE-----
# OVPN_ACCESS_SERVER_WEB_CA_BUNDLE_STOP
# OVPN_ACCESS_SERVER_IS_OPENVPN_WEB_CA=1
# OVPN_ACCESS_SERVER_ORGANIZATION=OpenVPN, Inc.
setenv FORWARD_COMPATIBLE 1
client
server-poll-timeout 4
nobind
remote <server_ip_and_port> udp
remote <server_ip_and_port> udp
remote <server_ip_and_port> tcp
remote <server_ip_and_port> udp
remote <server_ip_and_port> udp
remote <server_ip_and_port> udp
remote <server_ip_and_port> udp
remote <server_ip_and_port> udp
dev tun
dev-type tun
ns-cert-type server
setenv opt tls-version-min 1.0 or-highest
reneg-sec 604800
sndbuf 100000
rcvbuf 100000
# NOTE: LZO commands are pushed by the Access Server at connect time.
# NOTE: The below line doesn't disable LZO.
comp-lzo no
verb 3
setenv PUSH_PEER_INFO

<ca>
-----BEGIN CERTIFICATE-----
-----END CERTIFICATE-----
</ca>

<cert>
-----BEGIN CERTIFICATE-----
-----END CERTIFICATE-----
</cert>

<key>
-----BEGIN PRIVATE KEY-----
-----END PRIVATE KEY-----
</key>

key-direction 1
<tls-auth>
#
# 2048 bit OpenVPN static key (Server Agent)
#
-----BEGIN OpenVPN Static key V1-----
-----END OpenVPN Static key V1-----
</tls-auth>


# Extra user-defined configuration
float
resolv-retry infinite
persist-tun
persist-key
ping-timer-rem
keepalive 30 120
connect-retry 120 120
## -----BEGIN RSA SIGNATURE-----
## DIGEST:sha256
## -----END RSA SIGNATURE-----
## -----BEGIN CERTIFICATE-----
## -----END CERTIFICATE-----
## -----BEGIN CERTIFICATE-----
## -----END CERTIFICATE-----

And finally, additional parameters added into the server conf (and the client conf even though I know they are visible above) via the Access Server web interface:

SERVER CONF:
float
resolv-retry infinite
persist-tun
persist-key
ping-timer-rem
keepalive 30 120

CLIENT CONF:
float
resolv-retry infinite
persist-tun
persist-key
ping-timer-rem
keepalive 30 120
connect-retry 120 120

The additionals were added from looking at a million posts (at least it seems like it!) and trying to see if anything would work…. I’m not sure what they all do to be fair!

Its worth noting that the Pi Zero W is using the wlan0 interface (which I have a hunch may be the root of the problems). Also tun0 stays listed throughout all the time the server is down and the pi is auto-attempting to reconnect, but after the AUTH_FAILED issue the entry to tun0 is no longer listed. A simply work around would be to check for the presence of tun0 with a cron script, and start the openvpn client again if not, but that’s a workaround, not a solution.

Any help would be hugely appreciated! and Thank you in advance!

Owen.

When the Google Chrome browser failed to check the SSL certificate of a website, you may face an err_bad_ssl_client_auth_cert error.

The rise in the digital market is directly proportional to the increase in web securities. SSL (Secure Socket Layer) digital certificates are such web securities essential for securing site data and information.

Research by Welivesecurity indicates that almost 51.8% of the websites are HTTPS (Hypertext Transfer Protocol Secure). When a website is protected with SSL encryption security, it shows HTTPS in the address bar and a URL padlock.

SSL certificates secure the web with their robust encryption techniques. Since SSL certificates are used for securing data-in-transit between the browsers and servers with encryption, the browser ensures that the SSL certificate is valid, and properly configured. In case of any doubts, it will display an error. There are many SSL errors, and there are various solutions to fix them.

In this article, we will discuss one such SSL error, i.e., ERR_BAD_SSL_CLIENT_AUTH_CERT. Let’s quickly peep into the reasons as to why this error occurs and how the same can be resolved.

Cause of ERR_BAD_SSL_CLIENT_AUTH_CERT Error:

This SSL certificate error mainly occurs when Chrome checks the SSL certificate on the website the user is trying to access. Chrome’s security procedure can trigger the above error if Chrome cannot open the site requested by the user because the SSL certificate is issued from non-trustworthy sources.

Many other factors like corrupted Cache data, browser extensions, incorrect date and time, outdated browser, third-party software blocking the site’s access, etc. can also trigger this error. To resolve the same, it is essential to eliminate the responsible factors.

There can be server issues, i.e., the client’s SSL certificate (browser) is rejected by the server. An expired SSL certificate or non-trustworthy SSL may cause this issue.

#1. Sync the Date & Time:

This is the most common cause of any error. Hence the foremost step is to check the date and time on your computer. Wrong date and time are bound to trigger connection errors, and err_bad_ssl_client_auth_cert error is a widespread error caused by the same. The conflicting date and time between the SSL certificate validation date and the system clock is the root cause.

Syncing the system clock may resolve the issue.

Solution:

• Right-click the taskbar > Click date and time option
• Click “Sync Now” for synchronizing the same with Microsoft servers
• Ensure that the set date and time automatically option is “On.”
• Ensure that the time mentioned on the page is correct.
• Check if the error is fixed or not.

#2. Update Google Chrome:

Chrome browser is agonized by many bugs related to SSL certificates. Recently many users of Windows 7, we’re unable to access Google services. Though Google is quick in resolving issues and patching the bugs, being a user, you need to ensure that your browser is updated at all times.

Many times, an SSL error or any other error occurs due to outdated versions of the browser. They may not support the current versions of the SSL certificate, and hence the browser triggers an error.

• ERR_SSL_VERSION_INTERFERENCE
• ERR_CONNECTION_REFUSED
• Err_Cert_Authority_Invalid
• ERR_CERT_COMMON_NAME_INVALID

The same issue can happen, which may cause the error mentioned above.

The best way is to update the Chrome browser and see if it fixes the error or not. You can also uninstall Chrome and later install the latest version on your computer to resolve the issue.

Process:

• Open Chrome by clicking the three dots on the right-hand corner, select Help > About Google Chrome.
• Chrome will check for updates and hence wait for some time. If the screen pops saying the latest version available, update the same.
• Later restart your browser.

If the error persists, move to the next solution.

#3. Clear Browser Data:

Browser data is the storage of cookies, browser cache, and history of sites downloaded. The main reason why the browser stores this data is to give quick access to stored data to users on repeat requests.

But this data may contain expired cookies, cache, and outdated sites, which cause errors.

Clearing this data can fix your error.

Process:

• Open Chrome menu (3 dots)
• Go to More Tools > Clear browsing data
• In Advanced Tab > in Time Range > Select All Time
• Tick all the options.

• Click “Clear Data”. Restart Chrome and check if the error is resolved or not.

#4. Check for Third-Party Software Conflicts:

Web securities and third-party software include anti-virus software, other security software, firewall, etc. Sometimes this software prevents access to genuine sites by the false detection of malicious content. Hence, they may block the site access on the browser.

Hence, it is advisable to check these third-party securities and ensure their non-interference with the browser. You can temporarily disable these securities for the time being, and once the site is visited and your purpose is solved, you can enable the same again.

Note: This is not a safe option.

#5. Change TLS/SSL QUIC Settings:

When Chrome prompts the ERR_BAD_SSL_CLIENT_AUTH_CERT error, many users have reported that disabling SSL/TLS protocols may resolve the error.

Solutions:

• 1^st option – Disable the previous TLS versions (TLS v1.1 and TLS v1.2) and enable the current SSL versions (SSL v2 and SSL v3). Save the changes and check for the error.
• 2^nd option – Disable QUIC protocol by typing “chrome://flags/#enable-quic” in the address bar. Click enter.

Restart your browser and see if the error is fixed or not.

#6. Remove All Conflicting Browser Extensions:

Browser extensions improve site functionality but sometimes interfere with digital securities. This causes errors and impacts web performance.

Removing browser extensions can erase the error message.

Process:

• In Chrome menu > go to More Tools > Click Extensions.

• Remove the suspicious extensions and later restart the browser
• Check for the error.

In case if the error is still visible then:

• Open Chrome > go to Settings > Click Advanced Option
• Select the “Restore and Clean Up” option > Click “restore settings to their original defaults”.
• Restart Chrome.

#7. Update Windows:

Any outdated system or software triggers errors. An obsolete browser on a new machine or an updated browser on an outdated system can trigger errors. The same goes for the Windows Operating System. If your Windows OS is not upgraded for a long time, it may cause error issues.

Some users also noticed that the above error is explicitly triggered on outdated Windows versions because the browser didn’t accept the obsolete machine’s security certificate. Hence many users could resolve the error by simply updating Windows.

Process:

• Press Win + R and type “ms-settings: windows update.”

• On the Windows update screen, click “Check for updates” and install all the updates.
• Restart your computer and check for the error.

Wrapping Up:

The above mentioned are some quick, simple, and non-complicated solutions to resolve the ERR_BAD_SSL_CLIENT_AUTH_CERT error. Try the same, fix the error, and improve your browser’s effectiveness.

Related Articles:

• Err_SSL_Protocol_Error
• NET::ERR_CERT_COMMON_NAME_INVALID
• Net err cert revoked

February 22, 2021

1. What kops version are you running? The command kops version, will display
this information.
1.16.0-alpha.1 (git-ea779042c). I was also able to reproduce with 1.14.1 (git-b7c25f9a9)

2. What Kubernetes version are you running? kubectl version will print the
version if a cluster is running or provide the Kubernetes version specified as
a kops flag.
n/a (creating a new cluster, no version specified)

3. What cloud provider are you using?
OpenStack (Pike)

4. What commands did you run? What is the simplest way to reproduce this issue?

source openstack.rc
export OS_USER_DOMAIN_NAME="Default"
export KOPS_STATE_STORE=swift://sid-moc-kops
kops create cluster 
  --cloud openstack 
  --name sid-moc.n-x.win 
  --state ${KOPS_STATE_STORE} 
  --zones nova 
  --network-cidr 10.0.0.0/24 
  --image "Ubuntu 18 LTS" 
  --master-count=1 
  --node-count=2 
  --node-size m1.small 
  --master-size m1.large 
  --etcd-storage-type default 
  --api-loadbalancer-type public 
  --topology private 
  --bastion 
  --ssh-public-key ~/.ssh/id_rsa.pub 
  --networking weave 
  --os-dns-servers=8.8.8.8,8.8.4.4 
  --os-ext-net "external"

5. What happened after the commands executed?

I1112 17:21:42.340212    8363 create_cluster.go:1568] Using SSH public key: /home/ubuntu/.ssh/id_rsa.pub

error building path for "swift://sid-moc-kops": error building openstack authenticated client: Authentication failed

6. What did you expect to happen?
Successful creation of a cluster as explained in the OpenStack Getting Started guide.

7. Please provide your cluster manifest. Execute
kops get --name my.example.com -o yaml to display your cluster manifest.
You may want to remove your cluster name and other sensitive information.
n/a (no cluster created)

8. Please run the commands with most verbose logging by adding the -v 10 flag.
Paste the logs into this report, or in a gist and provide the gist link here.

I1112 17:21:46.646436    8480 create_cluster.go:1568] Using SSH public key: /home/ubuntu/.ssh/id_rsa.pub
I1112 17:21:46.648231    8480 factory.go:68] state store swift://sid-moc-kops
I1112 17:21:46.649790    8480 swiftfs.go:66] authenticating to keystone

error building path for "swift://sid-moc-kops": error building openstack authenticated client: Authentication failed

9. Anything else do we need to know?
After running source openstack.rc and export OS_USER_DOMAIN_NAME="Default", I’m able to use the openstack CLI client without issue, so my environment should be set correctly. I’ve tried using both Identity API v2 and v3 openstack.rc files. One potential source of issues I’ve identified is that my OpenStack cluster’s Swift application is hosted on a different subdomain than the rest of the cluster (e.g. API for Image, Volume, Identity, etc. is on openstack.example.com, but Swift is on os-swift.example.com).