Чекрейн ошибка 31 iphone 5s

Что я могу сделать, если сбой джейлбрейка?

Если вы не можете сделать джейлбрейк iPhone / iPad / iPod touch, следуйте приведенным ниже двум надежным способам.

Альтернатива № 1. Скачайте и попробуйте другую версию Checkra1n

Если вы скачали последнюю версию 0.10.1, есть несколько других версий Checkra1n с этой страницы, которые вы можете попробовать.

• Шаг 1. Выберите и скачайте любую из вышеперечисленных версий.
• Шаг 2. После установки вы можете начать джейлбрейк в обычном режиме. Если процесс проходит успешно, то вы делаете это.

Если нет, следуйте инструкциям ниже:

• Шаг 1: Запустите терминал на вашем Mac.
• Шаг 2: Введите «xattr –rc» и нажмите клавишу пробела.
• Шаг 3: Затем перетащите новый Checkra1n прямо в командное окно и нажмите «назад».
• Шаг 4: Теперь результаты будут продемонстрированы ниже.

Альтернатива № 2. Как исправить, когда появляются коды ошибок Checkra1n

Если вам предлагается ввести несколько кодов ошибок, указывающих на сбой джейлбрейка, пожалуйста, обратитесь к руководству ниже.

1. Код ошибки: -18

Если вы столкнулись с интерфейсом «Ошибка загрузки Bootstrap (код ошибки: 18)». Просто закройте 4MeKey и запустите его снова, чтобы сделать джейлбрейк вашего устройства.

2. Код ошибки: -20

Вернитесь к главному интерфейсу Checkra1n и нажмите «Параметры»> «Безопасный режим», затем снова выполните джейлбрейк.

3. Код ошибки: -31

Удалите и переустановите iOS с помощью Reiboot и попробуйте снова сделать джейлбрейк.

Источник

Guide: How to Fix Checkra1n Error 31

by Sophie Green Updated on 2022-10-18 / Update for iCloud

How complicated can it get to fix the checkra1n error 31 ? Not much! All you need is to try out some simple solutions and hopefully one of them will work wonders for you. Discussed below are 5 different methods to resolve the checkra1n error 110 issue.

Method 1: Restart Computer

One of the most common reasons for facing an exploit failed error code 31 windows 10 is a temporary glitch on your computer. To counter this all you need to do is restart your computer on which you are using the Checkra1n.

Method 2: Restart Your Device

Just the way your computer might be suffering a technical glitch, your other devices like iPhones or iPads might be facing the same issue. To resolve this all you need to do is restart your device and check if the issue still persists.

Method 3: Allow Untested Versions and Safe Mode

If restarting your devices did not help then here is another method that might resolve the issue. Here are the steps you need to follow.

• Restart your device.
• Now head to the Checkra1n app option.
• Now select the untested versions and safe mode option.
• Once you are done with this try jailbreaking again

In most cases, this will resolve the issue however if it does not, we still have more methods for you.

Method 4: Use the Old Version of Checkra1n

Even restarting your computer and selecting the safe mode you could not solve your checkra1n error 31iPad mini 2 issue.

No worries, you can try using the old version of Checkra1n. Many Reddit threads give assurance that the former version of Checkra is all you need to solve your checkra1n error 110 issues.

Method 5: Try 4MeKey to Jailbreak Your Device

If none of the methods mentioned above helped you resolve exploit failed error code 31 checkra1n windows, 4MeKey might be just what you need. Tenorshare 4MeKey is a software used to bypass the activation Lock on iOS devices, it is also able to remove the Apple ID which is already login on iOS devices.

Here are basic structures of writing those steps.

Download the Tenorshare 4MeKey software from the official website. Once the download is done, install it on your computer. Open the software and select the option – “Remove iCloud Activation Lock”.

With Tenorshare you can easily jailbreak into your device. Once this is done, the program begins installing the jailbreak tool to your USB drive and this process takes a few minutes to complete.

Next, you can simply start jailbreak and follow the on-screen instructions to jailbreak your device.

You can click on “Start”. You must note that after you bypass the iCloud activation lock you will not be able to use the phone features for phone calls, cellular, and iCloud of your new Apple ID.

The iCloud lock removal process will begin and the activation lock will soon be removed. You can now set up a new account on your device.

The End

Checkra1n error 31 is not an uncommon issue. Many users face it quite often and resolving it is not rocket science. With options like Tenorshare 4MeKey the process becomes even more easy and user-friendly. So? Why are you wasting your precious time? Go on and initiate a smooth jailbreak in your device.

Источник

iPad mini 2 error -31 #1161

I’m trying to jailbreak my iPad mini 2 with iOS 12.4.6 but keep getting error -31 after the heap spray screen. I am using the latest version of checkra1n, version 0.10.1. Any way to fix this?

The text was updated successfully, but these errors were encountered:

I am having similar issues. sometimes checkra1n decides to crash on me just after I get the error -31 or I get stuck on the right before trigger part.

Hmmm when I tried again but I backgrounded the app while it was jailbreaking and it worked fine??
coincidence?

Mine still doesn’t work 🙁 Are you using an iPad mini 2 as well?

Yes I am using an iPad mini 2

Maybe the A7 chip is still unreliable with checkra1n?

It happens for me as well with an iPhone 6s+ iOS 13.3 on a Mac Catalina

i fixed mine by switching to a less dodgy cable and then trying with safe mode and then without

I’m going to blindly assume you’re on Linux, and close this as a dupe of #1169.

Sorry but I am using Mac os

I am also using MacOS

You should open new issue if you’re on mac, mac was fixed in 0.10.1 and #1169 is linux-only issue.

Okay, probably not a dupe of #1169 then.

Also seeing this with checkra1n 0.10.2 on macOS 10.14.16. Checkra1n also crashes after receieving a decision for sending an error report. It crashes regardless of whether I select yes or no.
Update: Works fine if I enter DFU manually and run checkra1n in CLI mode.

Are you using USB-A cable or Type C?

Lightning to USB-A, going through an Apple dongle to USB-C on my MBP.

Lightning to USB-A, going through an Apple dongle to USB-C on my MBP.

Then you should be fine. Looks like a bug to me, but I don’t have the issue(Mac Mini, iPad mini 2, iPad Air 2)

Certainly seems to be, considering it worked fine through CLI after manually entering DFU, but any combination of methods and settings in the GUI didn’t seem to work. Doubt it was a device issue either, since this was straight after a factory reset on iOS 12.4.7.

@tigattack thx, it worked!
Here is a detailed tutorial (worked for iPad mini 2, ios 12.4.7, Mac OS High Sierra 10.13.6)

• Install checkra1n
• run in terminal cd /Applications/checkra1n.app/Contents/MacOS && sudo ./checkra1n

Somehow GUI version crashed with -31 error code but cli version combined with sudo worked.

I did not have to run as root, but I did do ./checkra1n -c , otherewise it would launch as a terminal-based UI rather than purely CLI.

what doo you guys mean @tigattack @ArtemBernatskyy @rhld16 @Siguza i dont understand how all that works were and how do i bypass Error Code-31

@tigattack thx, it worked!
Here is a detailed tutorial (worked for iPad mini 2, ios 12.4.7, Mac OS High Sierra 10.13.6)

• Install checkra1n
• run in terminal cd /Applications/checkra1n.app/Contents/MacOS && sudo ./checkra1n

Somehow GUI version crashed with -31 error code but cli version combined with sudo worked.

it’s works thanks 🙂

@tigattack thx, it worked!
Here is a detailed tutorial (worked for iPad mini 2, ios 12.4.7, Mac OS High Sierra 10.13.6)

• Install checkra1n
• run in terminal cd /Applications/checkra1n.app/Contents/MacOS && sudo ./checkra1n

Somehow GUI version crashed with -31 error code but cli version combined with sudo worked.

Источник

Checkra1n Exploit Failed (Error code: -31) #2156

Tell us about your setup:

1. What iDevice are you using?
2. On what version of iOS is it?
3. What version of checkra1n are you using?
4. What is your host system (OS version? Hackintosh? VM? etc.)?
5. How are you connecting to the device (USB-A? USB-C? Apple/3rd party cable? Through a USB hub?)?

What are the steps to reproduce the issue?

1. iPhone 5s
2. 12.5.4
   3.checkra1n 0.12.4 beta
3. MacBook air m1
4. USB-A apple cable USB hub

What do you expect, and what is happening instead?

Did you see a popup on the device stating it entered «Safe Mode» due to an error?

Does the issue also occur if you tick «Safe Mode» in the checkra1n options?

Any other info, error logs, screenshots, .

The text was updated successfully, but these errors were encountered:

— [08/06/21 23:15:31] : Waiting for DFU devices
— [08/06/21 23:15:31] : Using usbmuxd
— [08/06/21 23:15:34] : connection refused?!
— [08/06/21 23:15:34] : usbmux: Failed to connect (error code: -79)
Here i turn up DFU mode
— [08/06/21 23:15:50] : DFU device connected: xxxxxx8885c
— [08/06/21 23:15:50] : Exploiting
— [08/06/21 23:15:50] : Attempting to perform checkm8 on 8960 11.
— [08/06/21 23:15:50] : Checking if device is ready
— [08/06/21 23:15:50] : == Checkm8 Preparation stage ==
— [08/06/21 23:15:50] : Setting up the exploit (this is the heap spray)
— [08/06/21 23:15:50] : == Checkm8 Setup stage ==
— [08/06/21 23:15:50] : Disabled probabilistic mode since we encountered a partial xfer
— [08/06/21 23:15:50] : Deterministic approach was successful!
— [08/06/21 23:16:55] : Right before trigger (this is the real bug setup)
— [08/06/21 23:16:55] : Entered initial checkm8 state after 0 steps, issuing DFU abort..
— [08/06/21 23:16:55] : DFU device connected: xxxxxx8885c
— [08/06/21 23:16:55] : == Checkm8 Trigger stage ==
— [08/06/21 23:17:20] : Timed out in state 1, assuming we are back to square one with this device. (error code: -31)
— [08/06/21 23:17:43] : Checkmate!

What your m1 is on (OS version )

Same issue.
ipad air 1th
linux
usb-c
I have tried to replugin the lighting cable, not work.

What your m1 is on (OS version )

mine 11.6 (20G165)

Confirmed also when using Ubuntu Mate 20.04 on a Dell Latitude 7490
Target device iPad Mini 2

Hello,
I have the same problem with an Ipad Mini 2 with iOS 12.5.5 (checkra1n 0.12.4 beta). I get the error message «Exploit Failed (Error Code: -31). I changed my USB key, USB port, PC. Nothing helps. No» Safe mode «pop-up that appears and even the same error message if I check «Safe mode» in options. Anyone have any idea? Thanks in advance

A screenshot for more details.

Hey, having the same issue.

1. iPhone 7
2. 14.6
3. checkra1n 0.12.4 beta
4. MacBook pro m1
5. usb-c to usb-a apple cable
   Any fixes yet?

same issue here

1. iPad Air A1475
2. IOS12.5.5
3. checkra1n 0.12.4
4. vm ubuntu with AMD based pc
5. USB-A original apple cable

1. iPad Air A1475
2. IOS12.5.5
3. checkra1n 0.12.4
4. vm ubuntu with AMD based pc
5. USB-A original apple cable

I had the same issue with the iPad Air A1474 (A7) with iOS 12.5.5 and found the solution here.
Try Ra1nUSB_HT to boot in to a macOS environment. I used balenaEtcher to install the dmg file in a 16GB USB drive. checkra1n 0.12.4 beta (enter 124 in Terminal) worked on the first try. I used the Intel version, there is an AMD version too.

Источник

Error -31 iPad Air (WiFi) (1st Generation) iOS 12.4.7 #1447

Tell us about your setup:

What iDevice are you using?
iPad Air (WiFi) (1st Generation)

On what version of iOS is it?
iOS 12.4.7

What version of checkra1n are you using?
checkra1n 0.10.2

What is your host system (OS version? Hackintosh? VM? etc.)?
macOS Catalina 10.15.5

How are you connecting to the device (USB-A? USB-C? Apple/3rd party cable? Through a USB hub?)?
Apple USB-C Digital AV Multiport Adapter
Apple Lightning to USB Cable

What are the steps to reproduce the issue?

1. Initiate checkra1n 0.10.2
2. Connect iDevice to MacBook
3. Click Start
4. Put iDevice into Recovery mode and then into DFU mode.
5. Installing Jailbreak process
6. «Exploit Failed (Error code: -31)» appears

What do you expect, and what is happening instead?
I expected to jailbreak my iPad Air, but everytime I ran checkra1n and failed I had to exit DFU mode and tried again with no success.

Does the issue also occur if you tick «Safe Mode» in the checkra1n options?
Yes.

Any other info, error logs, screenshots, .

The text was updated successfully, but these errors were encountered:

Источник

Похожие вопросы