Citizen cl s631 ошибка

Форум NEO63.RU

Калибровка citizen

Калибровка citizen

Сообщение Sanek_623 » 20 фев 2014, 17:36

Калибровка citizen
Включаем при нажатых трех верхних клавишах (Pause, Feed, Stop), после того как три верхних светодиода загорятся Power (Зеленый), Print (Зеленый), Condition (Оранжевый), принтер издаст звуковой сигнал, отпускаем клавиши.

Далее жмем клавишу Mode/Repeat и не отпуская клавишу нажимаем Pause, выходит фишка на очень медленной скорости, при этом горит Power (Зеленый) и моргает Condition (Оранжевый). Когда верхних светодиода загорятся (Power (Зеленый), Print (Зеленый), Condition (Оранжевый)) калибровка почти закончена. Выходим из режима настройки, нажимаем клавишу Stop, все светодиоды кратковременно загораются и потом тухнут, при этом принтер издает один звуковой сигнал, остаются гореть только два верхних светодиода Power (Зеленый), Print (Зеленый). Калибровка закончена, осталось только проверить результаты, для этого нажимаем клавишу Feed, должна выйти одна этикетка.

Примечание. При первом нажатии клавиши Feed выйдет две этикетки, это нормально, при последующих нажатиях будет выходить по одной этикетки, в случае если калибровка проходила на непрерывной бумаге, то при первом нажатии выйдет отрезок бумаги двойной длины, не более 5-10 см.

Примечание. Если при попытке калибровки у Вас выдается ошибка «Не обнаружена метка или просвет между этикетками», то попробуйте заправить бумагу таким образом, что бы конец этикетки был как можно ближе к датчику, для надежности удалите с подложки следующую этикетку.

Источник

тт принтер ситизен с631

Ставить оценки могут только зарегистрированные пользователи.
Присоединяйтесь к профессиональному сообществу, пройдите регистрацию прямо сейчас

Действие недоступно

У Вас недостаточно прав для написания сообщений в данном разделе.

Данная возможность доступна пользователям начиная от статуса «Опытный».
Подробнее о статусах Вы можете ознакомиться в Правилах Форума.

Присоединяйтесь к нам в Telegram

Вход на форум

Недавно награждены

	Alexsei	2022-12-28
	Region60	2022-12-22
	Aelita	2022-12-22
	Amelehina	2022-12-20
	Roski	2022-12-05

Реклама

Завод «БАЛТКАБЕЛЬ» предлагает из наличия и под заказ

О форуме

© «РусКабель», 1999-2023

Все права защищены и охраняются законом. Администрация RusCable.Ru не несет ответственности за высказывания третьих лиц. Мнение редакции может не совпадать с мнением авторов материалов. 18+
Перепечатка информации возможна только при соблюдении следующих условий.

Редакция портала

111123, Москва, Электродный проезд, д.8а, оф.18
Телефон: +7 495 229 33 36 (мнк)
Viber/WhatsApp/Telegram: +7 999 003 33 36
E-mail: mail@ruscable.ru

Общаешься на форуме? Зарегистрируйся!

Только для зарегистрированных пользователей «Кабельного форума» RusCable.Ru доступны следующие возможности:

— Получение КАБСов за общение на форуме;
— Отправка личных сообщений пользователям;
— Сохранять в «Избранном» интересные темы;
— и многое другое.

Регистрация предельно простая и займет не более 2 минут.

Вход для зарегистрированных пользователей:

Источник

Citizen Cl-S521 Condition Error

We have collected for you the most relevant information on Citizen Cl-S521 Condition Error, as well as possible solutions to this problem. Take a look at the links provided and find the solution that works. Other people have encountered Citizen Cl-S521 Condition Error before you, so use the ready-made solutions.

521-621-631 LED Error and Op Panel V22B Cathy v2

https://www.citizen-systems.com/resource/support/Label/Generic_Printer_Files/Docs_Error_Manual/Common_Error_Indications_and_Quick_Settings.pdf

2shudwlrq sdqho vkruw fxwv wkh wkuhh prvw frpprq exwwrq rswlrqv &/ 6 ‘hvnwrsv rqo 0dqxdo (pxodwlrq 6zlwfk 3rzhu 2q suhvv ehhsv 3uhvv )((‘ [ iru ‘dwdpd[ [ iru =heud ±

CITIZEN CL-S521 USER MANUAL Pdf Download ManualsLib

https://www.manualslib.com/manual/222827/Citizen-Cl-S521.html

Page 31

Citizen CL S621 printer sensor error setup — YouTube

https://www.youtube.com/watch?v=Zqb-nVNmw9k

Jul 25, 2018 · About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators . Author: Pranesh Narvankar

CL-S521:BARCODE LABEL PRINTERS:CITIZEN SYSTEMS JAPAN …

https://www.citizen-systems.co.jp/english/printer/clp/cls521/index.html

CL-S521; Printing method: Direct thermal: Resolution (approx) 203 dpi (8 dots/mm) Print speed (max.) 150mm/sec. Print width (max.) 104.1mm: Print mode Batch mode: Normal printing (Single or multiple sheets) Teaf off mode: Feeds back media to the tear-off position after printing is completed. Cut mode: Prints while cutting at designaetd sheet units.

Citizen Cl-S521 Condition Error Fixes & Solutions

We are confident that the above descriptions of Citizen Cl-S521 Condition Error and how to fix it will be useful to you. If you have another solution to Citizen Cl-S521 Condition Error or some notes on the existing ways to solve it, then please drop us an email.

Источник

Citizen CL-S631, CL-S621 User Manual

Thermal Transfer Barcode & Label Printer

CONTENTS

COMPLIANCE STATEMENT FOR EUROPEAN USERS ——————————

FCC COMPLIANCE STATEMENT FOR AMERICAN USERS ————————

EMI COMPLIANCE STATEMENT FOR CANADIAN USERS————————

ETAT DE CONFORMITE EMI A L’USAGE DES UTILISATEURS CANADIENS ——

Chapter 1 Setup

Chapter 2 Printer Operation

Chapter 3 Printer Adjustments

INTRODUCTION

Thank you for purchasing a Citizen CL-series label printer offering high performance thermal transfer printing on media up to 4.1 inches wide.

This printer can be used for high-speed high-quality printing thanks to its direct thermal method and thermal transfer method that use a line thermal printhead together with its 32 bit RISC CPU and its ‘history control IC’.

• It is easy to change the printer’s settings on the operation panel, thanks to its unique and simple VuePrint menu system.

• Its high-lift printhead and mechanism means that media and ribbon can be loaded with ease and it is constructed for easy thermal printhead cleaning, etc.

• Media width adjustment, media thickness adjustment, and media sensor adjustment can all be made easily by the user using the colour-coded operator controls.

This printer contains both the Datamax ® and Zebra ® emulations and will automatically detect the language using the Cross-Emulation TM feature.

An industry standard RS232 serial port and USB1.1 port are standard equipment, for quick data transfer and printing.

Additional connectivity is available with an optional internally-housed IEEE1284 parallel port, an Ethernet interface and a wireless LAN print server.

The auto-cutter and peeler units are designed so that they can be installed easily.

The adjustable media sensors — which allow the sensors to be positioned in different locations across the media — are standard features making the printer ideal for use with special media.

The interface, power switch etc. are installed towards the back and the top cover opens and closes vertically so that the sides of the printer are not restricted.

FOR EUROPEAN USERS

CE marking shows conformity to the following criteria and provisions: Low Voltage Directive (2006/95/EC, formerly 73/23/EEC)/EN60950-1

EMC Directive (2004/108/EC, formerly 89/336/EEC)/EN55022, EN55024, EN61000-3-2 & EN61000-3-3

GS MARK STATEMENT

This product has been tested under EN ISO 7779 and has an acoustic level output no higher than 55db(A).

This device is not intended for use at a video workstation in compliance with Bildscharb V.

This device is not intended for use in the direct field of view at visual display workplaces. To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

The model name printed on the CL-S621 rating label is JM40-M01. The model name printed on the CL-S631 rating label is JM43-M01.

EMI COMPLIANCE STATEMENT

FOR CANADIAN USERS

This Class A digital apparatus complies with Canadian ICES-003.

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Use shielded cables to connect this device to computers.

Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

ETAT DE CONFORMITE EMI A L’USAGE

DES UTILISATEURS CANADIENS

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Cet équipment produit et utilise l’énergie à radiofréquences et s’iln’est pas installé et utilisé correctment, c’esst à dire en accord strict avec les instructions du fabricant, il risque de provoquer des intérferences avec la réception de la radio et de latélévision.

Le présent appareil numérique n’émet pas de bruite radio électriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

Cet équipment est conçu pour fournir une protection satisfaisante contre de telles interférences dans une installation résidentielle. Cependant, il n’y a pas de garantie contre les interférences avec les réceptions radio ou télévision, provoquées par la mise en et hors circuit de l’équipment; aussi, il est demandé a l’utilisateur d’essayer de corriger l’interférence par l’une ou plus des mesures suivantes:

• Réorienter l’antenne de réception.

• Installer l’ordinateur autre part, par égard pour le récepteur.

• Brancher l’ordinateur dans une prise de courant différente de façon à ce que l’ordinateur et le récepteur soient branchés sur des circuits différents.

IMPORTANT SAFETY INSTRUCTIONS

• Read all of these instructions and save them for later reference.

• Follow all warnings and instructions marked on the product.

• Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.

• Slots and openings on the cabinet and the back or bottom are provided for ventilation.

To ensure reliable operation of the product and to protect it from overheating, do not block or cover these openings. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

• This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• This product is equipped with a three-pronged plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

• Do not allow anything to rest on the power cord. Do not locate this product where the cord will be walked on.

• If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes for 120V outlet and 7.5 amperes for 220V-240V outlet.

• Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

• Except as explained elsewhere in this manual, don’t attempt to service this product yourself. Opening and removing those covers that are marked «Do Not Remove» may expose you to dangerous voltage points or other risks. Refer all servicing on those compartments to service personnel.

• The mains plug on this equipment must be used to disconnect mains power. Please ensure that the socket outlet is installed near the equipment and shall be easily accessible.

• Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

E. If the product has been dropped or the cabinet has been damaged.

F. If the product exhibits a distinct change in performance, indicating a need for service.

NOTICE

• Before use, be sure to read this manual. And keep it handy for reference when needed.

• The contents of this manual may change without prior notice.

• Reproduction, transfer, or transmission of the contents of this manual without prior consent is strictly prohibited.

• We are not liable for any damage resulting from the use of the information contained herein, regardless of errors, omissions, or misprints.

• We are not liable for any problems resulting from the use of optional products and consumable supplies other than the designated products contained herein.

• Do not handle, disassemble or repair the parts other than those specified in this manual.

• We are not liable for any damage caused by user’s erroneous use of the printer and inadequate environment.

• Data residing in the printer is temporary. Therefore, all data will be lost if power is lost. We are not liable for any damage or loss of profits caused by data loss due to failures, repairs, inspections, etc.

• Please contact us if there are any mistakes or ambiguities within this manual.

• If there are missing or incorrectly collated pages in this manual, contact us to obtain a new manual.

CITIZEN is a registered trademark of CITIZEN HOLDINGS CO., Japan.

CITIZEN es una marca registrada de CITIZEN HOLDINGS CO., Japón.

Copyright © 2010 by CITIZEN SYSTEMS JAPAN CO., LTD.

Источник

21

Printer Operation

LED Functions

1 POWER LED

It lights up when printer power is
turned on. (green)

2 PRINT LED

This is lit when the printer is able to
print. (green)

3 CONDITION LED

This is on when selecting settings.
(orange)

4 ERROR LED

This is lit or flashes when the printer is
in error status. (red)

Table of Alarm and Error Indications

In addition to normal operating mode, when an abnormal condition is detected
in the printer, an alarm sounds and each LED either lights up or flashes to
indicate the type of error.

Time Axis

: ON, : OFF

1

2

3

4

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

ON

OFF

Auto cutter abnormality
(jamming etc.)

PRINT

LED

ERROR

LED

CONDITION

LED

When the STOP key has been pushed

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

OFF

OFF

OFF

ON

OFF

ON

OFF

OFF

Media out
(media location cannot be detected)

Abnormal head temperature

Abnormal motor temperature

Head open

Media end

Abnormal head resistance

Communication error
(reception buffer overrun)

Communication error
(parity, framing)

Communication error
(transmission buffer overflow)

OFF

Auto cutter temperature abnormal

Item

Ribbon feed error

Ribbon end

OFF

OFF

Normal Operating Mode

Wide on/off marks indicate slow LED flashing.
Small circle on/off marks indicate quick LED flashing.

Калибровка citizen
Включаем при нажатых трех верхних клавишах (Pause, Feed, Stop), после того как три верхних светодиода загорятся Power (Зеленый), Print (Зеленый), Condition (Оранжевый), принтер издаст звуковой сигнал, отпускаем клавиши.

Далее жмем клавишу Mode/Repeat и не отпуская клавишу нажимаем Pause, выходит фишка на очень медленной скорости, при этом горит Power (Зеленый) и моргает Condition (Оранжевый). Когда верхних светодиода загорятся (Power (Зеленый), Print (Зеленый), Condition (Оранжевый)) калибровка почти закончена. Выходим из режима настройки, нажимаем клавишу Stop, все светодиоды кратковременно загораются и потом тухнут, при этом принтер издает один звуковой сигнал, остаются гореть только два верхних светодиода Power (Зеленый), Print (Зеленый). Калибровка закончена, осталось только проверить результаты, для этого нажимаем клавишу Feed, должна выйти одна этикетка.

Примечание. При первом нажатии клавиши Feed выйдет две этикетки, это нормально, при последующих нажатиях будет выходить по одной этикетки, в случае если калибровка проходила на непрерывной бумаге, то при первом нажатии выйдет отрезок бумаги двойной длины, не более 5-10 см.

Примечание. Если при попытке калибровки у Вас выдается ошибка «Не обнаружена метка или просвет между этикетками», то попробуйте заправить бумагу таким образом, что бы конец этикетки был как можно ближе к датчику, для надежности удалите с подложки следующую этикетку.

Страницы: [1]   Вниз

0 Пользователей и 1 Гость просматривают эту тему.

Страницы: [1]   Вверх