-
-
March 20 2008, 12:16
Для того, чтобы GSM-устройство выводило коды ошибок вместо стандартного «ERROR», на него необходимо послать следующие команды:
AT+CMEE=1
AT&W
CME ERROR’s (GSM Equipment related codes)
| Error | Description |
| CME ERROR: 0 | Phone failure |
| CME ERROR: 1 | No connection to phone |
| CME ERROR: 2 | Phone adapter link reserved |
| CME ERROR: 3 | Operation not allowed |
|
CME ERROR: 4 |
Operation not supported |
| CME ERROR: 5 | PH_SIM PIN required |
| CME ERROR: 6 | PH_FSIM PIN required |
| CME ERROR: 7 |
PH_FSIM PUK required |
| CME ERROR: 10 | SIM not inserted |
| CME ERROR: 11 | SIM PIN required |
| CME ERROR: 12 | SIM PUK required |
| CME ERROR: 13 | SIM failure |
|
CME ERROR: 14 |
SIM busy |
| CME ERROR: 15 | SIM wrong |
| CME ERROR: 16 | Incorrect password |
| CME ERROR: 17 |
SIM PIN2 required |
| CME ERROR: 18 | SIM PUK2 required |
| CME ERROR: 20 | Memory full |
| CME ERROR: 21 | Invalid index |
| CME ERROR: 22 | Not found |
|
CME ERROR: 23 |
Memory failure |
| CME ERROR: 24 | Text string too long |
| CME ERROR: 25 | Invalid characters in text string |
| CME ERROR: 26 |
Dial string too long |
| CME ERROR: 27 | Invalid characters in dial string |
| CME ERROR: 30 | No network service |
| CME ERROR: 31 | Network timeout |
| CME ERROR: 32 | Network not allowed, emergency calls only |
|
CME ERROR: 40 |
Network personalization PIN required |
| CME ERROR: 41 | Network personalization PUK required |
| CME ERROR: 42 | Network subset personalization PIN required |
| CME ERROR: 43 |
Network subset personalization PUK required |
| CME ERROR: 44 | Service provider personalization PIN required |
| CME ERROR: 45 | Service provider personalization PUK required |
| CME ERROR: 46 | Corporate personalization PIN required |
| CME ERROR: 47 | Corporate personalization PUK required |
|
CME ERROR: 48 |
PH-SIM PUK required |
| CME ERROR: 100 | Unknown error |
| CME ERROR: 103 | Illegal MS |
| CME ERROR: 106 |
Illegal ME |
| CME ERROR: 107 | GPRS services not allowed |
| CME ERROR: 111 | PLMN not allowed |
| CME ERROR: 112 | Location area not allowed |
| CME ERROR: 113 | Roaming not allowed in this location area |
|
CME ERROR: 126 |
Operation temporary not allowed |
| CME ERROR: 132 | Service operation not supported |
| CME ERROR: 133 | Requested service option not subscribed |
| CME ERROR: 134 |
Service option temporary out of order |
| CME ERROR: 148 | Unspecified GPRS error |
| CME ERROR: 149 | PDP authentication failure |
| CME ERROR: 150 | Invalid mobile class |
| CME ERROR: 256 | Operation temporarily not allowed |
|
CME ERROR: 257 |
Call barred |
| CME ERROR: 258 | Phone is busy |
| CME ERROR: 259 | User abort |
| CME ERROR: 260 |
Invalid dial string |
| CME ERROR: 261 | SS not executed |
| CME ERROR: 262 | SIM Blocked |
| CME ERROR: 263 | Invalid block |
| CME ERROR: 772 | SIM powered down |
CMS ERROR’s (GSM Network related codes)
| Error | Description |
| CMS ERROR: 1 | Unassigned number |
| CMS ERROR: 8 | Operator determined barring |
| CMS ERROR: 10 | Call bared |
| CMS ERROR: 21 | Short message transfer rejected |
|
CMS ERROR: 27 |
Destination out of service |
| CMS ERROR: 28 | Unindentified subscriber |
| CMS ERROR: 29 | Facility rejected |
| CMS ERROR: 30 |
Unknown subscriber |
| CMS ERROR: 38 | Network out of order |
| CMS ERROR: 41 | Temporary failure |
| CMS ERROR: 42 | Congestion |
| CMS ERROR: 47 | Recources unavailable |
|
CMS ERROR: 50 |
Requested facility not subscribed |
| CMS ERROR: 69 | Requested facility not implemented |
| CMS ERROR: 81 | Invalid short message transfer reference value |
| CMS ERROR: 95 |
Invalid message unspecified |
| CMS ERROR: 96 | Invalid mandatory information |
| CMS ERROR: 97 | Message type non existent or not implemented |
| CMS ERROR: 98 | Message not compatible with short message protocol |
| CMS ERROR: 99 | Information element non-existent or not implemente |
|
CMS ERROR: 111 |
Protocol error, unspecified |
| CMS ERROR: 127 | Internetworking , unspecified |
| CMS ERROR: 128 | Telematic internetworking not supported |
| CMS ERROR: 129 |
Short message type 0 not supported |
| CMS ERROR: 130 | Cannot replace short message |
| CMS ERROR: 143 | Unspecified TP-PID error |
| CMS ERROR: 144 | Data code scheme not supported |
| CMS ERROR: 145 | Message class not supported |
|
CMS ERROR: 159 |
Unspecified TP-DCS error |
| CMS ERROR: 160 | Command cannot be actioned |
| CMS ERROR: 161 | Command unsupported |
| CMS ERROR: 175 |
Unspecified TP-Command error |
| CMS ERROR: 176 | TPDU not supported |
| CMS ERROR: 192 | SC busy |
| CMS ERROR: 193 | No SC subscription |
| CMS ERROR: 194 | SC System failure |
|
CMS ERROR: 195 |
Invalid SME address |
| CMS ERROR: 196 | Destination SME barred |
| CMS ERROR: 197 | SM Rejected-Duplicate SM |
| CMS ERROR: 198 |
TP-VPF not supported |
| CMS ERROR: 199 | TP-VP not supported |
| CMS ERROR: 208 | D0 SIM SMS Storage full |
| CMS ERROR: 209 | No SMS Storage capability in SIM |
| CMS ERROR: 210 | Error in MS |
|
CMS ERROR: 211 |
Memory capacity exceeded |
| CMS ERROR: 212 | Sim application toolkit busy |
| CMS ERROR: 213 | SIM data download error |
| CMS ERROR: 255 |
Unspecified error cause |
| CMS ERROR: 300 | ME Failure |
| CMS ERROR: 301 | SMS service of ME reserved |
| CMS ERROR: 302 | Operation not allowed |
| CMS ERROR: 303 | Operation not supported |
|
CMS ERROR: 304 |
Invalid PDU mode parameter |
| CMS ERROR: 305 | Invalid Text mode parameter |
| CMS ERROR: 310 | SIM not inserted |
| CMS ERROR: 311 |
SIM PIN required |
| CMS ERROR: 312 | PH-SIM PIN required |
| CMS ERROR: 313 | SIM failure |
| CMS ERROR: 314 | SIM busy |
| CMS ERROR: 315 | SIM wrong |
|
CMS ERROR: 316 |
SIM PUK required |
| CMS ERROR: 317 | SIM PIN2 required |
| CMS ERROR: 318 | SIM PUK2 required |
| CMS ERROR: 320 |
Memory failure |
| CMS ERROR: 321 | Invalid memory index |
| CMS ERROR: 322 | Memory full |
| CMS ERROR: 330 | SMSC address unknown |
| CMS ERROR: 331 | No network service |
|
CMS ERROR: 332 |
Network timeout |
| CMS ERROR: 340 | No +CNMA expected |
| CMS ERROR: 500 | Unknown error |
| CMS ERROR: 512 |
User abort |
| CMS ERROR: 513 | Unable to store |
| CMS ERROR: 514 | Invalid Status |
| CMS ERROR: 515 | Device busy or Invalid Character in string |
| CMS ERROR: 516 | Invalid length |
|
CMS ERROR: 517 |
Invalid character in PDU |
| CMS ERROR: 518 | Invalid parameter |
| CMS ERROR: 519 | Invalid length or character |
| CMS ERROR: 520 |
Invalid character in text |
| CMS ERROR: 521 | Timer expired |
| CMS ERROR: 522 | Operation temporary not allowed |
| CMS ERROR: 532 | SIM not ready |
| CMS ERROR: 534 | Cell Broadcast error unknown |
|
CMS ERROR: 535 |
Protocol stack busy |
| CMS ERROR: 538 | Invalid parameter |
©
There are two types of GSM error codes: CMS Error codes and CME Error codes that your GSM may return when sending an SMS.
The CMS error codes start with ‘+CMS Error:‘ and are always network related errors. The CME error codes start with ‘+CME Error:‘ and are always device (equipment) related errors.
CME Errors (GSM equipment errors)
| CME Error | Description |
| 0 | Phone failure |
| 1 | No connection to phone |
| 2 | Phone adapter link reserved |
| 3 | Operation not allowed |
| 4 | Operation not supported |
| 5 | PH_SIM PIN required |
| 6 | PH_FSIM PIN required |
| 7 | PH_FSIM PUK required |
| 10 | SIM not inserted |
| 11 | SIM PIN required |
| 12 | SIM PUK required |
| 13 | SIM failure |
| 14 | SIM busy |
| 15 | SIM wrong |
| 16 | Incorrect password |
| 17 | SIM PIN2 required |
| 18 | SIM PUK2 required |
| 20 | Memory full |
| 21 | Invalid index |
| 22 | Not found |
| 23 | Memory failure |
| 24 | Text string too long |
| 25 | Invalid characters in text string |
| 26 | Dial string too long |
| 27 | Invalid characters in dial string |
| 30 | No network service |
| 31 | Network timeout |
| 32 | Network not allowed, emergency calls only |
| 40 | Network personalization PIN required |
| 41 | Network personalization PUK required |
| 42 | Network subset personalization PIN required |
| 43 | Network subset personalization PUK required |
| 44 | Service provider personalization PIN required |
| 45 | Service provider personalization PUK required |
| 46 | Corporate personalization PIN required |
| 47 | Corporate personalization PUK required |
| 48 | PH-SIM PUK required |
| 100 | Unknown error |
| 103 | Illegal MS |
| 106 | Illegal ME |
| 107 | GPRS services not allowed |
| 111 | PLMN not allowed |
| 112 | Location area not allowed |
| 113 | Roaming not allowed in this location area |
| 126 | Operation temporary not allowed |
| 132 | Service operation not supported |
| 133 | Requested service option not subscribed |
| 134 | Service option temporary out of order |
| 148 | Unspecified GPRS error |
| 149 | PDP authentication failure |
| 150 | Invalid mobile class |
| 256 | Operation temporarily not allowed |
| 257 | Call barred |
| 258 | Phone is busy |
| 259 | User abort |
| 260 | Invalid dial string |
| 261 | SS not executed |
| 262 | SIM Blocked |
| 263 | Invalid block |
| 772 | SIM powered down |
CMS Errors (GSM Network errors)
| CMS Error | Description |
| 1 | Unassigned number |
| 8 | Operator determined barring |
| 10 | Call bared |
| 21 | Short message transfer rejected |
| 27 | Destination out of service |
| 28 | Unindentified subscriber |
| 29 | Facility rejected |
| 30 | Unknown subscriber |
| 38 | Network out of order |
| 41 | Temporary failure |
| 42 | Congestion |
| 47 | Recources unavailable |
| 50 | Requested facility not subscribed |
| 69 | Requested facility not implemented |
| 81 | Invalid short message transfer reference value |
| 95 | Invalid message unspecified |
| 96 | Invalid mandatory information |
| 97 | Message type non existent or not implemented |
| 98 | Message not compatible with short message protocol |
| 99 | Information element non-existent or not implemente |
| 111 | Protocol error, unspecified |
| 127 | Internetworking , unspecified |
| 128 | Telematic internetworking not supported |
| 129 | Short message type 0 not supported |
| 130 | Cannot replace short message |
| 143 | Unspecified TP-PID error |
| 144 | Data code scheme not supported |
| 145 | Message class not supported |
| 159 | Unspecified TP-DCS error |
| 160 | Command cannot be actioned |
| 161 | Command unsupported |
| 175 | Unspecified TP-Command error |
| 176 | TPDU not supported |
| 192 | SC busy |
| 193 | No SC subscription |
| 194 | SC System failure |
| 195 | Invalid SME address |
| 196 | Destination SME barred |
| 197 | SM Rejected-Duplicate SM |
| 198 | TP-VPF not supported |
| 199 | TP-VP not supported |
| 208 | D0 SIM SMS Storage full |
| 209 | No SMS Storage capability in SIM |
| 210 | Error in MS |
| 211 | Memory capacity exceeded |
| 212 | Sim application toolkit busy |
| 213 | SIM data download error |
| 255 | Unspecified error cause |
| 300 | ME Failure |
| 301 | SMS service of ME reserved |
| 302 | Operation not allowed |
| 303 | Operation not supported |
| 304 | Invalid PDU mode parameter |
| 305 | Invalid Text mode parameter |
| 310 | SIM not inserted |
| 311 | SIM PIN required |
| 312 | PH-SIM PIN required |
| 313 | SIM failure |
| 314 | SIM busy |
| 315 | SIM wrong |
| 316 | SIM PUK required |
| 317 | SIM PIN2 required |
| 318 | SIM PUK2 required |
| 320 | Memory failure |
| 321 | Invalid memory index |
| 322 | Memory full |
| 330 | SMSC address unknown |
| 331 | No network service |
| 332 | Network timeout |
| 340 | No +CNMA expected |
| 500 | Unknown error |
| 512 | User abort |
| 513 | Unable to store |
| 514 | Invalid Status |
| 515 | Device busy or Invalid Character in string |
| 516 | Invalid length |
| 517 | Invalid character in PDU |
| 518 | Invalid parameter |
| 519 | Invalid length or character |
| 520 | Invalid character in text |
| 521 | Timer expired |
| 522 | Operation temporary not allowed |
| 532 | SIM not ready |
| 534 | Cell Broadcast error unknown |
| 535 | Protocol stack busy |
| 538 | Invalid parameter |
Send SMS using AT commands
Some advanced GSM modems like WaveCom and Multitech, support the SMS text mode.
This mode allows you to send SMS messages using AT commands, without the need to encode
the binairy PDU field of the SMS first. This is done by the GSM modem
Check if your GSM phone or modem supports SMS text mode
To check if your modem supports this text mode, you can try the following command:
AT+CMGF=1 <ENTER>
If the modem reponds with “OK” this mode is supported.
Please note that using this mode it is onluy possible to send simple text messages. It is not possible
to send multipart, Unicode, data and other types of messages.
Setting up the modem
If the modem contains a SIM card with is secured with a PIN code, we have to enter this pin code first:
AT+CPIN=”0000″ <ENTER> (replace 0000 with your PIN code).
Please not that in most cases you have only 3 attemps to set the correct PIN code.
After setting the PIN code, wait some seconds before issueing the next command to give the modem some time
to register with the GSM network.
In order to send a SMS, the modem has to be put in SMS text mode first using the following command:
AT+CMGF=1 <ENTER>
In text mode there are some additional parameters that can be set.
Using the following command we can read the current values:
AT+CSMP? <ENTER>
The modem will reponse with a string like this:
+CSMP: 1,169,0,0
OK
The first value is a combination of some option bits:
| bit 7 | RP | Reply path, not used in text mode |
| bit 6 | UDHI | User Data Header Information |
| bit 5 | SRR | Set this bit to request a delivery report |
| bit 3,4 | VPF | Validity Period, set b4=1 if a VP value is present |
| bit 2 | RD | Reject Duplicates, do not return a message ID when a message with the same destination and ID is still pending |
| bit 0,1 | MTI | Message Type Indicator b1=0 & b0=0 -> SMS-DELIVER b1=0 & b0=1 -> SMS-SUBMIT |
Bit 0 of the message is always set when sending messages (SMS-SUBMIT). So the first value should be 1 or higher.
The second parameter sets the Validity Period of the message. This value is encoded as follows:
| 0 – 143 | (VP + 1) x 5 minutes |
| 144 – 167 | 12 Hours + ((VP-143) x 30 minutes) |
| 168 – 196 | (VP-166) x 1 day |
| 197 – 255 | (VP-192) x 1 week |
The third parameter contains the PID (Protocol Identifier). This parameter is only used for advanced messaging.
The fourth parameter contains the DCS (Data Coding Scheme). This parameter is used to select the characterset/messagetype.
When setting the DCS parameter to ‘0’ standard 7 bit text is send. When setting this parameter to ’16’ the message is sent as a flash message.
To send a message with a validity period of 1 day, the parameters have to be set like this:
Bit 0 and 4 of the first field has to be set, so the first value will become 1 + 16 = 17.
Send the following command to the modem to set this parameters:
AT+CSMP=17,167,0,16 <ENTER>
If the modem responds with “OK” ,the modem is ready to send (flash) text messages with a validity period of 1 day.
Sending the message
To send the SMS message, type the following command:
AT+CMGS=”+31638740161″ <ENTER>
Replace the above phone number with your own cell phone number. The modem will respond with:
>
You can now type the message text and send the message using the <CTRL>-<Z> key combination:
Hello World ! <CTRL-Z>
After some seconds the modem will respond with the message ID of the message, indicating that the message was sent correctly:
+CMGS: 62
The message will arrive on the mobile phone shortly.
Sending an Unicode SMS message
Some modems also have the capability to send Unicode or UCS2 messages without encoding a PDU.
You can send Unicode messages by only converting the Unicode data to a HEX string and send this string to the modem.
To check whether your modem supports this mode, just type the following command:
AT+CSCS=?
This commands displays the codepages supported by the modem. The modem will respond like this:
+CSCS: (“GSM”,”PCCP437″,”CUSTOM”,”HEX”)
If this string contains “HEX” or “UCS2”, Unicode seems to be supported.
To specify that you will use an HEX string to send the message, set the codepage to “HEX” or “UCS2” depending on the modem response.
In our example we will set the modem to “HEX” :
AT+CSCS=”HEX” <ENTER>
Next, we have to specify the correct DCS (Data Coding Scheme) for Unicode messages, which is 0x08.
We can set this value by changing the fourth parameter of the AT+CSMP command to ‘8’:
AT+CSMP=1,167,0,8 <ENTER>
The modem is now ready to send messages as Unicode. Now is the time to send the actual message:
AT+CMGS=”+31638740161″ <ENTER>
Replace the above phone number with your own cell phone number. The modem will respond with:
>
The only thing you have to program by yourself, is a simple routine which converts the Unicode string to an hexidecimal string like this:
مرحبا
Which is ‘Hello’ in arabic will be converted like this:
“06450631062D06280627”
You can send this hexidecimal string to the modem:
06450631062D06280627 <CTRL-Z>
After some seconds the modem will respond with the message ID of the message, indicating that the message was sent correctly:
+CMGS: 63
The message will arrive on the mobile phone shortly.
Коды ошибок запуска программы и отправки СМС:
0 Сообщение отправлено, и модем/телефон подтвердил
успешную отправку сообщения.
2 На компьютере нет указанного последовательного порта или
не найден указанный конф. файл.
5 Не удалось открыть указанный порт COM ("нет доступа",
скорее всего, порт был занят другой программой).
87 Ошибка в параметрах запуска программы или параметрах смс.
121 Нет ответа от модема.
1460 Нет ответа от модема (тайм-аут)
7012 Модем не найден
536870912 Ошибка отправки СМС.
536870929 Модем отклонил попытку отправки сообщения
536870931 Модем сообщил об ошибке отправки
536870932 Модем не сообщил результат отправки
536870933 Получен неправильный ответ модема
536870934 Ошибка ответа модема
536870935 Одна или несколько частей длинного сообщения не были
отправлены из-за ошибок (этот код ошибки только для длинных
сообщений)
536870936 Все части длинного сообщения не были отправлены из-за ошибок
(этот код ошибки только для длинных сообщений)
Коды ошибок CME ERROR – GSM Equipment related codes
CME ERROR: 0 Phone failure CME ERROR: 1 No connection to phone CME ERROR: 2 Phone adapter link reserved CME ERROR: 3 Operation not allowed CME ERROR: 4 Operation not supported CME ERROR: 5 PH_SIM PIN required CME ERROR: 6 PH_FSIM PIN required CME ERROR: 7 PH_FSIM PUK required CME ERROR: 10 SIM not inserted CME ERROR: 11 SIM PIN required CME ERROR: 12 SIM PUK required CME ERROR: 13 SIM failure CME ERROR: 14 SIM busy CME ERROR: 15 SIM wrong CME ERROR: 16 Incorrect password CME ERROR: 17 SIM PIN2 required CME ERROR: 18 SIM PUK2 required CME ERROR: 20 Memory full CME ERROR: 21 Invalid index CME ERROR: 22 Not found CME ERROR: 23 Memory failure CME ERROR: 24 Text string too long CME ERROR: 25 Invalid characters in text string CME ERROR: 26 Dial string too long CME ERROR: 27 Invalid characters in dial string CME ERROR: 30 No network service CME ERROR: 31 Network timeout CME ERROR: 32 Network not allowed, emergency calls only CME ERROR: 40 Network personalization PIN required CME ERROR: 41 Network personalization PUK required CME ERROR: 42 Network subset personalization PIN required CME ERROR: 43 Network subset personalization PUK required CME ERROR: 44 Service provider personalization PIN required CME ERROR: 45 Service provider personalization PUK required CME ERROR: 46 Corporate personalization PIN required CME ERROR: 47 Corporate personalization PUK required CME ERROR: 48 PH-SIM PUK required CME ERROR: 100 Unknown error CME ERROR: 103 Illegal MS CME ERROR: 106 Illegal ME CME ERROR: 107 GPRS services not allowed CME ERROR: 111 PLMN not allowed CME ERROR: 112 Location area not allowed CME ERROR: 113 Roaming not allowed in this location area CME ERROR: 126 Operation temporary not allowed CME ERROR: 132 Service operation not supported CME ERROR: 133 Requested service option not subscribed CME ERROR: 134 Service option temporary out of order CME ERROR: 148 Unspecified GPRS error CME ERROR: 149 PDP authentication failure CME ERROR: 150 Invalid mobile class CME ERROR: 256 Operation temporarily not allowed CME ERROR: 257 Call barred CME ERROR: 258 Phone is busy CME ERROR: 259 User abort CME ERROR: 260 Invalid dial string CME ERROR: 261 SS not executed CME ERROR: 262 SIM Blocked CME ERROR: 263 Invalid block CME ERROR: 772 SIM powered down
Коды ошибок CMS Error – GSM Network related codes
CMS ERROR: 1 Unassigned number CMS ERROR: 8 Operator determined barring CMS ERROR: 10 Call bared CMS ERROR: 21 Short message transfer rejected CMS ERROR: 27 Destination out of service CMS ERROR: 28 Unindentified subscriber CMS ERROR: 29 Facility rejected CMS ERROR: 30 Unknown subscriber CMS ERROR: 38 Network out of order CMS ERROR: 41 Temporary failure CMS ERROR: 42 Congestion CMS ERROR: 47 Recources unavailable CMS ERROR: 50 Requested facility not subscribed CMS ERROR: 69 Requested facility not implemented CMS ERROR: 81 Invalid short message transfer reference value CMS ERROR: 95 Invalid message unspecified CMS ERROR: 96 Invalid mandatory information CMS ERROR: 97 Message type non existent or not implemented CMS ERROR: 98 Message not compatible with short message protocol CMS ERROR: 99 Information element non-existent or not implemente CMS ERROR: 111 Protocol error, unspecified CMS ERROR: 127 Internetworking , unspecified CMS ERROR: 128 Telematic internetworking not supported CMS ERROR: 129 Short message type 0 not supported CMS ERROR: 130 Cannot replace short message CMS ERROR: 143 Unspecified TP-PID error CMS ERROR: 144 Data code scheme not supported CMS ERROR: 145 Message class not supported CMS ERROR: 159 Unspecified TP-DCS error CMS ERROR: 160 Command cannot be actioned CMS ERROR: 161 Command unsupported CMS ERROR: 175 Unspecified TP-Command error CMS ERROR: 176 TPDU not supported CMS ERROR: 192 SC busy CMS ERROR: 193 No SC subscription CMS ERROR: 194 SC System failure CMS ERROR: 195 Invalid SME address CMS ERROR: 196 Destination SME barred CMS ERROR: 197 SM Rejected-Duplicate SM CMS ERROR: 198 TP-VPF not supported CMS ERROR: 199 TP-VP not supported CMS ERROR: 208 D0 SIM SMS Storage full CMS ERROR: 209 No SMS Storage capability in SIM CMS ERROR: 210 Error in MS CMS ERROR: 211 Memory capacity exceeded CMS ERROR: 212 Sim application toolkit busy CMS ERROR: 213 SIM data download error CMS ERROR: 255 Unspecified error cause CMS ERROR: 300 ME Failure CMS ERROR: 301 SMS service of ME reserved CMS ERROR: 302 Operation not allowed CMS ERROR: 303 Operation not supported CMS ERROR: 304 Invalid PDU mode parameter CMS ERROR: 305 Invalid Text mode parameter CMS ERROR: 310 SIM not inserted CMS ERROR: 311 SIM PIN required CMS ERROR: 312 PH-SIM PIN required CMS ERROR: 313 SIM failure CMS ERROR: 314 SIM busy CMS ERROR: 315 SIM wrong CMS ERROR: 316 SIM PUK required CMS ERROR: 317 SIM PIN2 required CMS ERROR: 318 SIM PUK2 required CMS ERROR: 320 Memory failure CMS ERROR: 321 Invalid memory index CMS ERROR: 322 Memory full CMS ERROR: 330 SMSC address unknown CMS ERROR: 331 No network service CMS ERROR: 332 Network timeout CMS ERROR: 340 No +CNMA expected CMS ERROR: 500 Unknown error CMS ERROR: 512 User abort CMS ERROR: 513 Unable to store CMS ERROR: 514 Invalid Status CMS ERROR: 515 Device busy or Invalid Character in string CMS ERROR: 516 Invalid length CMS ERROR: 517 Invalid character in PDU CMS ERROR: 518 Invalid parameter CMS ERROR: 519 Invalid length or character CMS ERROR: 520 Invalid character in text CMS ERROR: 521 Timer expired CMS ERROR: 522 Operation temporary not allowed CMS ERROR: 532 SIM not ready CMS ERROR: 534 Cell Broadcast error unknown CMS ERROR: 535 Protocol stack busy CMS ERROR: 538 Invalid parameter
Status of a previously submitted SMS-SUBMIT (статус отправленного сообщения SMS-SUBMIT)
Short message transaction completed
0000000 Short message received by the SME
0000001 Short message forwarded by the SC to the SME but the SC is
unable to confirm delivery
0000010 Short message replaced by the SC
Reserved values
0000011..0001111 Reserved
0010000..0011111 Values specific to each SC
Temporary error, SC still trying to transfer SM
0100000 Congestion
0100001 SME busy
0100010 No response from SME
0100011 Service rejected
0100100 Quality of service not available
0100101 Error in SME
0100110..0101111 Reserved
0110000..0111111 Values specific to each SC
Permanent error, SC is not making any more transfer attempts
1000000 Remote procedure error
1000001 Incompatible destination
1000010 Connection rejected by SME
1000011 Not obtainable
1000100 Quality of service not available
1000101 No interworking available
1000110 SM Validity Period Expired
1000111 SM Deleted by originating SME
1001000 SM Deleted by SC Administration
1001001 SM does not exist (The SM may have previously existed in
the SC but the SC no longer has knowledge of it or the SM
may never have previously existed in the SC)
1001010..1001111 Reserved
1010000..1011111 Values specific to each SC
Temporary error, SC is not making any more transfer attempts
1100000 Congestion
1100001 SME busy
1100010 No response from SME
1100011 Service rejected
1100100 Quality of service not available
1100101 Error in SME
1100110..1101001 Reserved
1101010..1101111 Reserved
1110000..1111111 Values specific to each SC