Controller id 0 controller encountered a fatal error and was reset

You may see the following error in the messages log after running this command:   grep reset /var/log/messages | grep fatal  Jun  6 04:00:01 localhost disk_subs

Run:    megacli -fwtermlog -dsply -a0 -nolog  > fwterm.out

and attach the fwterm.out file to the case.

Also captured the logs from the RAID controller by running as root:  megacli -fwtermlog -dsply -a0 -nolog 

fwterm logs showed:

T1: EVT#376474-T1:   1=Firmware version 3.130.05-2086
01/01/00  0:00:02: EVT#376475-01/01/00  0:00:02: 345=Controller encountered a fatal error and was reset
01/01/00  0:00:02: Initializing the Temperature Monitor

Dell recommends that you upgrade the firmware for the internal H710 RAID controller.  It will require 5-10 minutes to install the update and require a 10 minute reboot.

Download the PERC RAID Controller firmware for your specific system.  Look for the Red Hat Linux Update Package (.BIN).  For Example:

H710: http://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=kkr9j

H730: https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=f675y

Download the Red Hat Linux Update Package (.BIN) file to /home on the sensor.

To update the firmware do the following:

  • Login as root.
  • Shutdown Security Analytics using:  scotus stop
  • To install the firmware:
    • chmod 755 /home/SAS-RAID_Firmware_XXXXX_LN_VERSION_AXX.BIN
  • Update the firmware:
    • /home/SAS-RAID_Firmware_XXXXX_LN_VERSION_AXX.BIN

This will take a few minutes, There will be verification that the firmware is the correct firmware for the hardware and lots of license details.  Once it is done, it will reboot the system.  

SA should come online after the reboot. 

Источник

Troubleshooting

Problem

[This abstract has been truncated due to length constraints]

When running a ServeRAID M1200 Series SATA/SATA Controller, or when running a ServeRAID M5100 or M5200 Series SAS/SATA Controller with no Transportable Memory Module (TMM) attached, the controller may reset under heavy workload.

In the MegaRAID Storage Manager event log, the following event will appear after the reset.

«Controller encountered a fatal error and was reset»

In the ServeRAID controller’s firmware log, you will see the following event at the time of the controller reset.

MonTask: line 280 in file ../../raid/1078int.c.

[4]: fp=c112e4b0, lr=c12d29a0 — oobCmdInfo+60
[5]: fp=c112e4c8, lr=c191913c — OOBExecCmdIssue+1ac
[6]: fp=c112e4f8, lr=c191a35c- OOBHandleCmdPacket+200
[7]: fp=c112e5a0, lr=c191b008 — OOB_RecvCallback+238

ServeRAID controller firmware logs can be pulled with the following StorCLI command. StorCLI is availa

Resolving The Problem

Source

RETAIN tip: H001154

Symptom

When running a ServeRAID M1200 Series SATA/SATA Controller, or
when running a ServeRAID M5100 or M5200 Series SAS/SATA Controller
with no Transportable Memory Module (TMM) attached, the controller
may reset under heavy workload.

In the MegaRAID Storage Manager event log, the following event
will appear after the reset.

  «Controller encountered a fatal error and was reset»

In the ServeRAID controller’s firmware log, you will see the
following event at the time of the controller reset.

  MonTask: line 280 in file ../../raid/1078int.c.

[4]: fp=c112e4b0, lr=c12d29a0 — oobCmdInfo+60
[5]: fp=c112e4c8, lr=c191913c — OOBExecCmdIssue+1ac
[6]: fp=c112e4f8, lr=c191a35c — OOBHandleCmdPacket+200
[7]: fp=c112e5a0, lr=c191b008 — OOB_RecvCallback+238

ServeRAID controller firmware logs can be pulled with the
following StorCLI command. StorCLI is available from IBM Fix
Central.

storcli /cX show termlog > termlog.txt

(where X = controller #)

Affected configurations

The system is configured with one or more of the following IBM
Option part numbers:

  • IBM Flex System Storage Expansion Node, Option part number
    68Y8588, any replacement part number
  • ServeRAID M1210e, any model
  • ServeRAID M1215 SAS/SATA Controller for IBM System x, Option
    part number 46C9114, any model
  • ServeRAID M5110 SAS/SATA Controller Card, Option part number
    81Y4481, any replacement part number
  • ServeRAID M5110 SAS/SATA Controller for IBM System x (CTO), any
    replacement part number
  • ServeRAID M5110e SAS/SATA Controller for IBM System x, onboard,
    any embedded
  • ServeRAID M5115 SAS/SATA Controller, Option part number
    90Y4390, any replacement part number
  • ServeRAID M5210 SAS/SATA Controller for IBM System x, Option
    part number 46C9110, any any
  • ServeRAID M5210e SAS/SATA Controller for IBM System x, Option
    part number 46C9117CTO, any any

This tip is not system specific.

This tip is not software specific.

Solution

This behavior has been corrected in M5100 Series SAS/SATA
Controller firmware version 23.33.0-0033, and M5200/M1200 Series
SAS/SATA Controller firmware version 24.9.0-0026.

The file is or will be available by selecting the appropriate
Product Group, type of System, Product name, Product machine type,
and operating system on IBM Support’s Fix Central web page, at the
following URL:

     http://www.ibm.com/support/fixcentral/

Workaround

No hardware should be replaced. The ServeRAID controller should
be updated to the latest firmware level.

Additional information

When the ServeRAID SAS/SATA controllers are running in
Integrated MegaRAID (iMR) mode, with no Transportable Memory Module
(TMM), a certain amount of system memory is allocated to controller
so that out of band commands can be performed.

With the previous firmware, there was no check in place to
verify buffer overruns did not occur within this available memory
pool.

Document Location

Worldwide

Operating System

System x Hardware Options:Operating system independent / None

[{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QUOEARE»,»label»:»System x Hardware Options->ServeRAID->ServeRAID M and MR10 Series->81Y4481″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QUOEVWA»,»label»:»System x Hardware Options->ServeRAID->ServeRAID M and MR10 Series->46C9110″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QUOEVWB»,»label»:»System x Hardware Options->ServeRAID->ServeRAID M and MR10 Series->46C9117″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QUOEZBN»,»label»:»System x Hardware Options->ServeRAID->ServeRAID M and MR10 Series->46C9114″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}}]

Источник

Модераторы: Trinity admin`s, Free-lance moderator`s

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Проблемы с массивом на LSI9280

Здравствуйте

Нужен совет

Есть сервер, fujitsu primergy rx200 s7 wi2012r2std, установлен контроллер LSI 9280-8e, подключена полка на 24 диска, собран массив raid60

С некоторых пор начались проблемы — диск пропадает из системы. Вслед за диском пропадает и контроллер

Код: Выделить всё

PS C:Program Files (x86)MegaRAID Storage Manager> .StorCLI.exe /c1 show
Status = Failure
Description = At least one controller is busy. Please wait for 3 minutes and try again

В логе сообщения

Код: Выделить всё

Controller ID:  1  Controller encountered a fatal error and was reset
Event ID:345.

Reset to device, DeviceRaidPort2, was issued.

Controller ID:  1   PD Predictive failure:  
    -:-:2.

Controller ID:  1   PD Predictive failure:  
    -:-:21.

После перезагрузки работа восстанавливается и некоторое время все работает нормально

Попробовал заменить контроллер на 9286CV-8e, ничего не изменилось

Вдобавок после одной из перезагрузок контроллер потерял диск. Диск я заменил, запустился ребилд, но идет он как-то очень вяло

Собственно, вопрос — чтоможно предпринять? Заменить сразу два диска с ошибками чтения мне не кажется хорошей идеей

Код: Выделить всё

Controller = 1
Status = Success
Description = None

Product Name = LSI MegaRAID SAS 9286CV-8e
Serial Number = SV41916432
SAS Address =  500605b008dafe00
PCI Address = 00:04:00:00
System Time = 12/01/2015 18:36:07
Mfg. Date = 05/06/14
Controller Time = 12/01/2015 19:34:46
FW Package Build = 23.34.0-0005
BIOS Version = 5.50.03.0_4.17.08.00_0x06110200
FW Version = 3.460.05-4565
Driver Name = megasas2.sys
Driver Version = 6.709.12.00
Vendor Id = 0x1000
Device Id = 0x5B
SubVendor Id = 0x1000
SubDevice Id = 0x9291
Host Interface = PCIE
Device Interface = SAS-6G
Bus Number = 4
Device Number = 0
Function Number = 0
Drive Groups = 1

TOPOLOGY :
========

--------------------------------------------------------------------------
DG Arr Row EID:Slot DID Type   State BT      Size PDC  PI SED DS3  FSpace
--------------------------------------------------------------------------
 0 -   -   -        -   RAID60 Pdgd  N  36.376 TB dsbl N  N   dflt N
 0 0   -   -        -   RAID6  Dgrd  N  18.188 TB dsbl N  N   dflt N
 0 0   0   10:0     32  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   1   10:1     29  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   2   10:2     18  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   3   10:3     17  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   4   10:4     15  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   5   10:5     35  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   6   10:6     37  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   7   10:7     26  DRIVE  Rbld  Y   1.818 TB dsbl N  N   dflt -
 0 0   8   10:8     34  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   9   10:9     16  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   10  10:10    56  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 0   11  10:11    33  DRIVE  Onln  N   1.818 TB dsbl N  N   dflt -
 0 1   -   -        -   RAID6  Dgrd  N  18.188 TB dsbl N  N   dflt N
 0 1   0   10:12    13  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   1   10:13    38  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   2   10:14    24  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   3   10:15    49  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   4   10:16    52  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   5   10:17    27  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   6   10:18    48  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   7   10:19    30  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   8   10:20    55  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   9   10:21    57  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   10  10:22    36  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
 0 1   11  10:23    58  DRIVE  Onln  Y   1.818 TB dsbl N  N   dflt -
--------------------------------------------------------------------------

DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Dgrd=Degraded
Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active
PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign
DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present

Virtual Drives = 1

VD LIST :
=======

-----------------------------------------------------------
DG/VD TYPE   State Access Consist Cache sCC      Size Name
-----------------------------------------------------------
0/0   RAID60 Pdgd  RW     No      RWTD  -   36.376 TB VD_0
-----------------------------------------------------------

Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|B=Blocked|Consist=Consistent|
R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency

Physical Drives = 24

PD LIST :
=======

----------------------------------------------------------------------------
EID:Slt DID State DG     Size Intf Med SED PI SeSz Model                 Sp
----------------------------------------------------------------------------
10:0     32 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:1     29 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:2     18 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:3     17 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:4     15 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:5     35 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:6     37 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:7     26 Rbld   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:8     34 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:9     16 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:10    56 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:11    33 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:12    13 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:13    38 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:14    24 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:15    49 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:16    52 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:17    27 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:18    48 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:19    30 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:20    55 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:21    57 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:22    36 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
10:23    58 Onln   0 1.818 TB SATA HDD N   N  512B WDC WD2003FYYS-02W0B0 U
----------------------------------------------------------------------------

EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded


PS C:Program Files (x86)MegaRAID Storage Manager>

Аватара пользователя

Stranger03

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 12979
Зарегистрирован: 14 ноя 2003, 16:25
Откуда: СПб, Екатеринбург
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

Stranger03 » 02 дек 2015, 10:40

rahs
Как я понимаю, контроллер «левый»? С дисками, надо проверить те, что вызывают подозрения. Если есть какие-то косяки — менять. Были случаи, когда один диск «гадил» всему массиву.

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 10:56

В каком смысле «левый»?

По проверке дисков: что будет, если я проблемные диски просто выдерну и заменю? По факту проблемные диски в разных спанах, проблем быть не должно. В теории.

Аватара пользователя

Stranger03

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 12979
Зарегистрирован: 14 ноя 2003, 16:25
Откуда: СПб, Екатеринбург
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

Stranger03 » 02 дек 2015, 11:44

rahs писал(а):В каком смысле «левый»?

Не по каналу Фуджи?

По проверке дисков: что будет, если я проблемные диски просто выдерну и заменю? По факту проблемные диски в разных спанах, проблем быть не должно. В теории.

По одиночке меняйте, дожидайтесь полного ребилда. Можно еще прогнать верификацию рейда. А то, что в разных спанах, не играет особой роли. Я повторюсь, у нас была пара случаев, когда один диск гадил всем. Правда на Адаптеке, но не суть. Чем-то «забивал» контроллер, у того постоянно вываливались диски. На форуме редко, но тоже проскакивали случаи.

Аватара пользователя

gs

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

gs » 02 дек 2015, 11:51

Если диски в разных спанах, то проблем быть не должно.
Но гадость ситуации в том, что таких проблем вообще не должно быть (пропадание контролера). Так что поаккуратнее.
Спонтанный отвал исправных дисков чаще всего бывает из-за проблем совместимости или кабелей/бэкплейнов…

В общем, подергать провода, прошить контроллер, если не свежий… после окончания ребилда конечно.

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 11:59

Stranger03 писал(а):Не по каналу Фуджи?

Да, контроллеры отдельно покупались

Stranger03 писал(а):По одиночке меняйте, дожидайтесь полного ребилда. Можно еще прогнать верификацию рейда. А то, что в разных спанах, не играет особой роли. Я повторюсь, у нас была пара случаев, когда один диск гадил всем. Правда на Адаптеке, но не суть. Чем-то «забивал» контроллер, у того постоянно вываливались диски. На форуме редко, но тоже проскакивали случаи.

Ну вот сейчас на ребилд контроллер хочет два месяца

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 12:01

gs писал(а):Если диски в разных спанах, то проблем быть не должно.

В теории…

gs писал(а):Но гадость ситуации в том, что таких проблем вообще не должно быть (пропадание контролера). Так что поаккуратнее.
Спонтанный отвал исправных дисков чаще всего бывает из-за проблем совместимости или кабелей/бэкплейнов…

Эта полка с дисками на таком же контроллере долго работала без нареканий

gs писал(а):В общем, подергать провода, прошить контроллер, если не свежий… после окончания ребилда конечно.

Прошивки и драйвера обновил еще до выпадения диска

Аватара пользователя

Stranger03

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 12979
Зарегистрирован: 14 ноя 2003, 16:25
Откуда: СПб, Екатеринбург
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

Stranger03 » 02 дек 2015, 12:07

rahs писал(а):Да, контроллеры отдельно покупались

Тут даже кейс не откроешь, и никто не будет гарантировать работоспособность. Хотя конечно работать то должно бы. Контроллер стандартный.

Ну вот сейчас на ребилд контроллер хочет два месяца

Мда, это печальненько, это под нагрузкой из под ОСи? Как вариант, все отключить, контроллер воткнуть в другую машину и попробовать на нем под биосом, без нагрузки.

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 12:11

Stranger03 писал(а):Мда, это печальненько, это под нагрузкой из под ОСи? Как вариант, все отключить, контроллер воткнуть в другую машину и попробовать на нем под биосом, без нагрузки.

Сейчас попробую в биосе посмотреть, сколько запросит

Аватара пользователя

gs

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 16650
Зарегистрирован: 23 авг 2002, 17:34
Откуда: Москва
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

gs » 02 дек 2015, 12:31

Под нагрузкой ребилд может идти сколь угодно долго…

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 13:16

А вот в биос контроллера мне зайти не удалось. Странно. Такое впечатление, что при загрузке сервер его вообще не видит

Перезагрузился, остановил все процессы — 13 часов

Аватара пользователя

Stranger03

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 12979
Зарегистрирован: 14 ноя 2003, 16:25
Откуда: СПб, Екатеринбург
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

Stranger03 » 02 дек 2015, 14:19

rahs писал(а):Перезагрузился, остановил все процессы — 13 часов

Для САТА дисков это нормально, я бы сказал даже довольно быстро.

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 02 дек 2015, 14:31

Подождем. Завтра видно будет.

Кстати, фуджиковский ServerView RAID Manager контроллер увидел и нормально с ним работает

Аватара пользователя

Stranger03

Сотрудник Тринити
Сотрудник Тринити
Сообщения: 12979
Зарегистрирован: 14 ноя 2003, 16:25
Откуда: СПб, Екатеринбург
Контактная информация:

Re: Проблемы с массивом на LSI9280

Сообщение

Stranger03 » 02 дек 2015, 14:48

rahs писал(а):Кстати, фуджиковский ServerView RAID Manager контроллер увидел и нормально с ним работает

Дык и будет работать, они же контроллеры не делают, оемят у LSI.

rahs

Advanced member
Сообщения: 98
Зарегистрирован: 07 дек 2009, 13:44
Откуда: Архангельск

Re: Проблемы с массивом на LSI9280

Сообщение

rahs » 04 дек 2015, 14:03

Докладаю

Ребилд прошел. Заменил оба проблемных диска, массиву сразу полегчало — на ребилд хочет 16 часов и это под рабочей нагрузкой.

Ошибки типа «Corrected medium error during recovery on disk» еще есть, но их немного

В общем, похоже, действительно сбойный диск не давал контроллеру нормально работать

Спасибо за помощь

Вернуться в «Массивы — Технические вопросы, решение проблем.»


Перейти

  • Серверы
  • ↳   Серверы — Конфигурирование
  • ↳   Конфигурации сервера для 1С
  • ↳   Серверы — Решение проблем
  • ↳   Серверы — ПО, Unix подобные системы
  • ↳   Серверы — ПО, Windows система, приложения.
  • ↳   Серверы — ПО, Базы Данных и их использование
  • ↳   Серверы — FAQ
  • Дисковые массивы, RAID, SCSI, SAS, SATA, FC
  • ↳   Массивы — RAID технологии.
  • ↳   Массивы — Технические вопросы, решение проблем.
  • ↳   Массивы — FAQ
  • Майнинг, плоттинг, фарминг (Добыча криптовалют)
  • ↳   Proof Of Work
  • ↳   Proof Of Space
  • Кластеры — вычислительные и отказоустойчивые ( SMP, vSMP, NUMA, GRID , NAS, SAN)
  • ↳   Кластеры, Аппаратная часть
  • ↳   Deep Learning и AI
  • ↳   Кластеры, Программное обеспечение
  • ↳   Кластеры, параллельные файловые системы
  • Медиа технологии, и цифровое ТВ, IPTV, DVB
  • ↳   Станции видеомонтажа, графические системы, рендеринг.
  • ↳   Видеонаблюдение
  • ↳   Компоненты Digital TV решений
  • ↳   Студийные системы, производство ТВ, Кино и рекламы
  • Инфраструктурное ПО и его лицензирование
  • ↳   Виртуализация
  • ↳   Облачные технологии
  • ↳   Резервное копирования / Защита / Сохранение данных
  • Сетевые решения
  • ↳   Сети — Вопросы конфигурирования сети
  • ↳   Сети — Технические вопросы, решение проблем
  • Общие вопросы
  • ↳   Обсуждение общих вопросов
  • ↳   Приколы нашего IT городка
  • ↳   Регистрация на форуме

Источник
Skip To Main Content




Introducing 4th Gen Intel® Xeon® Scalable Processors

Introducing 4th Gen Intel® Xeon® Scalable Processors

Introducing 4th Gen Intel® Xeon® Scalable Processors

The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

  • Safari
  • Chrome
  • Edge
  • Firefox

Article ID: 000036658

Content Type: Troubleshooting

Last Reviewed: 07/22/2021

How do I Resolve the «Controller ID: 0 Fatal firmware…» Error?

Environment

Intel® RAID Controller RS2BL040 / 80

Server board with the latest BIOS/firmware

BUILT IN — ARTICLE INTRO SECOND COMPONENT

Close Window

Summary

Troubleshooting hints on how to approach the «Fatal Firmware» errors.

Description

When the Controller ID:  0   Fatal firmware… error occurs, the system reboots.

Resolution

The fatal firmware error initially points to the controller having failed. However, consider the following steps first:

  1. See that the Board-Card combination is a compatible one.
  2. Contact Support with the RAID logs and System Information Retrieval Utility (Sysinfo) logs if the situation persists.

Related Products

This article applies to 1 products

Discontinued

Intel® RAID Controller RS2BL040

  • Summary
  • Description
  • Resolution

1

Need more help?

Contact support

Alt text to be used for img

Give Feedback

Did you find this information useful?

YES

NO

Characters remaining: 500

We appreciate all feedback, but cannot reply or give product support. Please do not enter contact information. If you require a response, contact support.

Thank you

Disclaimer

1

All postings and use of the content on this site are subject to Intel.com Terms of Use.

Источник

About Lenovo

  • Our Company

  • News

  • Investor Relations

  • Sustainability

  • Product Compliance

  • Product Security

  • Lenovo Open Source

  • Legal Information

  • Jobs at Lenovo

Shop

  • Laptops & Ultrabooks

  • Tablets

  • Desktops & All-in-Ones

  • Workstations

  • Accessories & Software

  • Servers

  • Storage

  • Networking

  • Laptop Deals

  • Outlet

Support

  • Drivers & Software

  • How To’s

  • Warranty Lookup

  • Parts Lookup

  • Contact Us

  • Repair Status Check

  • Imaging & Security Resources

Resources

  • Where to Buy

  • Shopping Help

  • Sales Order Status

  • Product Specifications (PSREF)

  • Forums

  • Registration

  • Product Accessibility

  • Environmental Information

  • Gaming Community

  • LenovoEDU Community

  • LenovoPRO Community

©

Lenovo.

|
|
|
|

Источник



Oct 14, 2009



12



0



18,510

0


  • #1

Hi folks. I’m running an LSI 9240-8i RAID card in Win8x64. Every time I boot up the MegaRAID software gives me the following error:

Controller ID: 0 Controller encountered a fatal error and was reset

I have the latest drivers. Any ideas? Thanks.

popatim



Dec 2, 2009



38,841



963



129,290

8,725


  • #2

Usual troubleshooting steps on that are to update the firmware or roll back to one that didnt have this error if you just did update.
If problem still occurs then disable consistancy checks in MSM,
Disable any extra motherbd sata controllers (marvel, jmicron, gigabyte, asmedia…) and if you still get the problem then set your intel/amd ports to ide mode or disable them too. If you still have problems you probably have to send the card in for repair.

popatim



Dec 2, 2009



38,841



963



129,290

8,725


  • #2

Usual troubleshooting steps on that are to update the firmware or roll back to one that didnt have this error if you just did update.
If problem still occurs then disable consistancy checks in MSM,
Disable any extra motherbd sata controllers (marvel, jmicron, gigabyte, asmedia…) and if you still get the problem then set your intel/amd ports to ide mode or disable them too. If you still have problems you probably have to send the card in for repair.



Oct 14, 2009



12



0



18,510

0


  • #3

Ahh. Okay. So having other RAID controllers there might cause this issue?

popatim



Dec 2, 2009



38,841



963



129,290

8,725


  • #4

yes, alot of times its a IRQ issue

Thread starter Similar threads Forum Replies Date

D

Question Standard NVM Express Controller error — NVMe drive not detected in BIOS ? Storage 2 Jan 14, 2023

A

[SOLVED] Windows will not boot from M.2 NVMe SSD on PCIe socket Storage 4 Jan 10, 2023

P

Question PCIE4 SSD on PCIE3 slot controller temp Storage 1 Dec 16, 2022

R

Question What is a Microsemi 2100-4i4e SATA/SAS Controller used for ? Storage 1 Dec 11, 2022

M

Question RAID 5 — Intel Raid controller RS3DC040 Failed drive replacement help Storage 1 Nov 20, 2022

G

Question Trouble with B550 Motherboard + SAS RAID Storage 7 Nov 14, 2022

ThaSpoda

[SOLVED] Standard NVM Express Controller driver error m.2 ssd not detected Storage 8 Nov 2, 2022

SparkyTech934

[SOLVED] Converting RAID 5 to RAID 10 Using Intel RSTCLI Tool Storage 5 Nov 2, 2022

D

Question Request recommendations for a RAID controller Storage 7 Sep 25, 2022

G

Question Is it possible to use RAM cache of a RAID controller as a RAM disk? Storage 2 Aug 13, 2022

  • Advertising
  • Cookies Policies
  • Privacy
  • Term & Conditions
  • Topics

Источник
Already updated firmware and controller bios through MegaCLI.
‘ve Also updated all software and firmware bios motherboard: Intel SC2600CP4IOC.
The RAID controller card is an Intel RS25DB080, fully updated.
The discs are 4 Seagate ST3600057SS 600GB SAS 15Krpm setup Raid 10 across the raid controller card and backplane supermicro.
SuperMicro Server Rack 2U — CSE-825TQ-R720LPB

********************************************************************************

Support the LSI recommended seeking support from Intel. Without a word more.
Intel said that the controller card or the motherboard, or the cabinet, or are in the HD compatibility list Centos. Recommended using RedHat: (

*******************************************************************************

This driver is unstable. It’s the latest obtained through the website of LSI.com :
[root@server1 part4]# modinfo megaraid_sas
filename: /lib/modules/2.6.32-279.14.1.el6.x86_64/weak-updates/megaraid_sas/megaraid_sas.ko
description: LSI MegaRAID SAS Driver
author: megaraidlinux@lsi.com
version: 06.504.01.00
license: GPL
srcversion: FC78BA667D02F9A06E65BAB
alias: pci:v00001000d0000005Dsv*sd*bc*sc*i*
alias: pci:v00001000d0000005Bsv*sd*bc*sc*i*
alias: pci:v00001028d00000015sv*sd*bc*sc*i*
alias: pci:v00001000d00000413sv*sd*bc*sc*i*
alias: pci:v00001000d00000071sv*sd*bc*sc*i*
alias: pci:v00001000d00000073sv*sd*bc*sc*i*
alias: pci:v00001000d00000079sv*sd*bc*sc*i*
alias: pci:v00001000d00000078sv*sd*bc*sc*i*
alias: pci:v00001000d0000007Csv*sd*bc*sc*i*
alias: pci:v00001000d00000060sv*sd*bc*sc*i*
alias: pci:v00001000d00000411sv*sd*bc*sc*i*
depends:
vermagic: 2.6.32-279.el6.x86_64 SMP mod_unload modversions
parm: max_sectors:Maximum number of sectors per IO command (int)
parm: msix_disable:Disable MSI-X interrupt handling. Default: 0 (int)
parm: msix_vectors:MSI-X max vector count. Default: Set by FW (int)
parm: throttlequeuedepth:Adapter queue depth when throttled due to I/O timeout. Default: 16 (int)
parm: resetwaittime:Wait time in seconds after I/O timeout before resetting adapter. Default: 180 (int)

******************************************************************************

# /opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aAll

                                     
Adapter #0

==============================================================================
                    Versions
                ================
Product Name : Intel (R) RAID Controller RS25DB080
Serial No : SV20113635
FW Package Build: 23.9.0-0018

                    Mfg. Data
                ================
Mfg. Date : 01/04/12
Rework Date : 00/00/00
Revision No : 08C
Battery FRU : N/A

                Image Versions in Flash:
                ================
BIOS Version : 5.38.00_4.12.05.00_0x05180000
WebBIOS Version : 6.1-49-e_49-Rel
Preboot CLI Version: 05.05-03:#%00011
FW Version : 3.220.35-1998
NVDATA Version : 2.1209.03-0114
Boot Block Version : 2.05.00.00-0009
BOOT Version : 07.26.13.219

                Pending Images in Flash
                ================
None

                PCI Info
                ================
Controller Id : 0000
Vendor Id : 1000
Device Id : 005b
SubVendorId : 8086
SubDeviceId : 9265

Host Interface : PCIE

ChipRevision : B0

Number of Frontend Port: 0
Device Interface : PCIE

Number of Backend Port: 8
Port : Address
0 5000c50059db1735
1 5000c50059db2589
2 5000c50059dae335
3 5000c50059dae395
4 0000000000000000
5 0000000000000000
6 0000000000000000
7 0000000000000000

                HW Configuration
                ================
SAS Address : 500605b0042c7220
BBU : Absent
Alarm : Present
NVRAM : Present
Serial Debugger : Present
Memory : Present
Flash : Present
Memory Size : 1024MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Absent
Temperature sensor for ROC : Present
Temperature sensor for controller : Absent

ROC temperature : 50 degree Celcius

                Settings
                ================
Current Time : 13:9:33 12/19, 2012
Predictive Fail Poll Interval : 300sec
Interrupt Throttle Active Count : 16
Interrupt Throttle Completion : 50us
Rebuild Rate : 30%
PR Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruction Rate : 30%
Cache Flush Interval : 4s
Max Drives to Spinup at One Time : 4
Delay Among Spinup Groups : 2s
Physical Drive Coercion Mode : 1GB
Cluster Mode : Disabled
Alarm : Enabled
Auto Rebuild : Enabled
Battery Warning : Disabled
Ecc Bucket Size : 15
Ecc Bucket Leak Rate : 1440 Minutes
Restore HotSpare on Insertion : Enabled
Expose Enclosure Devices : Disabled
Maintain PD Fail History : Enabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : No
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Default LD PowerSave Policy : Controller Defined
Maximum number of direct attached drives to spin up in 1 min : 120
Auto Enhanced Import : No
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : No
POST delay : 90 seconds

                Capabilities
                ================
RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives : SAS, SATA

Allowed Mixing:

Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed

                Status
                ================
ECC Bucket Count : 0

                Limitations
                ================
Max Arms Per VD : 32
Max Spans Per VD : 8
Max Arrays : 128
Max Number of VDs : 64
Max Parallel Commands : 1008
Max SGE Count : 60
Max Data Transfer Size : 8192 sectors
Max Strips PerIO : 42
Max LD per array : 16
Min Strip Size : 8 KB
Max Strip Size : 1.0 MB
Max Configurable CacheCade Size: 0 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 879 MB

                Device Present
                ================
Virtual Drives : 1
  Degraded : 0
  Offline : 0
Physical Devices : 5
  Disks : 4
  Critical Disks : 0
  Failed Disks : 0

                Supported Adapter Operations
                ================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : Yes
Patrol Read Rate : Yes
Alarm Control : Yes
Cluster Support : No
BBU : Yes
Spanning : Yes
Dedicated Hot Spare : Yes
Revertible Hot Spares : Yes
Foreign Config Import : Yes
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : No
Deny STP Passthrough : No
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : Yes
Support PFK : Yes
Support PI : Yes
Support Boot Time PFK Change : No
Disable Online PFK Change : No
Support LDPI Type1 : No
Support LDPI Type2 : No
Support LDPI Type3 : No
PFK TrailTime Remaining : 0 days 0 hours
Support Shield State : Yes
Block SSD Write Disk Cache Change: No

                Supported VD Operations
                ================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : Yes
Reconstruction : Yes
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No
Support Breakmirror : No
Power Savings : No

                Supported PD Operations
                ================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : No
Deny Clear : No
Deny Locate : No
Support Temperature : Yes
Disable Copyback : No
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : Yes
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : Yes
Enable Spin Down of UnConfigured Drives : Yes
Disable Spin Down of hot spares : No
Spin Down time : 30
T10 Power State : No
                Error Counters
                ================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0

                Cluster Information
                ================
Cluster Permitted : No
Cluster Active : No

                Default Settings
                ================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 256kB
Flush Time : 4 seconds
Write Policy : WB
Read Policy : Adaptive
Cache When BBU Bad : Disabled
Cached IO : No
SMART Mode : Mode 6
Alarm Disable : Yes
Coercion Mode : 1GB
ZCR Config : Unknown
Dirty LED Shows Drive Activity : No
BIOS Continue on Error : No
Spin Down Mode : None
Allowed Device Type : SAS/SATA Mix
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : Yes
Allow SSD SAS/SATA Mix in VD : No
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 16
Disable Ctrl-R : Yes
Enable Web BIOS : Yes
Direct PD Mapping : No
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : Yes
Expose Enclosure Devices : No
Maintain PD Fail History : Yes
Disable Puncturing : No
Zero Based Enclosure Enumeration : No
PreBoot CLI Enabled : Yes
LED Show Drive Activity : Yes
Cluster Disable : Yes
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : No
Enable Led Header : Yes
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Allow
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : Don’t Auto spin down Configured Drives
Max power savings option is not allowed for LDs. Only T10 power conditions are to be used.
Default spin down time in minutes: 30
Enable JBOD : No
TTY Log In Flash : No
Auto Enhanced Import : No
BreakMirror RAID Support : No
Disable Join Mirror : No
Enable Shield State : Yes
Time taken to detect CME : 60s

Exit Code: 0x00

*******************************************************************************

# /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -L0 -a0

                                     

Adapter 0 — Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 1.088 TB
Mirror Data : 1.088 TB
State : Optimal
Strip Size : 256 KB
Number Of Drives per span:2
Span Depth : 2
Default Cache Policy: WriteBack, ReadAhead, Cached, Write Cache OK if Bad BBU
Current Cache Policy: WriteBack, ReadAhead, Cached, Write Cache OK if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Enabled
Encryption Type : None
PI type: No PI

Is VD Cached: No

Exit Code: 0x00

*******************************************************************************

[root@server1 MegaRaid]# dmidecode
# dmidecode 2.11
SMBIOS 2.6 present.
171 structures occupying 10094 bytes.
Table at 0x000E9450.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
    Vendor: Intel Corp.
    Version: SE5C600.86B.01.06.0002.110120121539
    Release Date: 11/01/2012
    Address: 0xF0000
    Runtime Size: 64 kB
    ROM Size: 8192 kB
    Characteristics:
        PCI is supported
        BIOS is upgradeable
        BIOS shadowing is allowed
        Boot from CD is supported
        Selectable boot is supported
        EDD is supported
        5.25″/1.2 MB floppy services are supported (int 13h)
        3.5″/720 kB floppy services are supported (int 13h)
        3.5″/2.88 MB floppy services are supported (int 13h)
        Print screen service is supported (int 5h)
        8042 keyboard services are supported (int 9h)
        Serial services are supported (int 14h)
        Printer services are supported (int 17h)
        ACPI is supported
        USB legacy is supported
        BIOS boot specification is supported
        Targeted content distribution is supported
    BIOS Revision: 4.6

Handle 0x0001, DMI type 1, 27 bytes
System Information
    Manufacturer: Intel Corporation
    Product Name: S2600CP
    Version: ………………..
    Serial Number: …………
    UUID: 0AF0D286-248B-E111-BD1D-001E67456792
    Wake-up Type: Other
    SKU Number: To be filled by O.E.M.
    Family: To be filled by O.E.M.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
    Manufacturer: Intel Corporation
    Product Name: S2600CP
    Version: E99552-507
    Serial Number: QSCP21600302
    Asset Tag: enter
    Features:
        Board is a hosting board
        Board is replaceable
    Location In Chassis: To be filled by O.E.M.
    Chassis Handle: 0x0003
    Type: Motherboard
    Contained Object Handles: 0

Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
    Manufacturer: …………………………
    Type: Main Server Chassis
    Lock: Not Present
    Version: ………………
    Serial Number: ………………
    Asset Tag: enter
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    OEM Information: 0x00000000
    Height: Unspecified
    Number Of Power Cords: 1
    Contained Elements: 0

Handle 0x0004, DMI type 4, 42 bytes
Processor Information
    Socket Designation: CPU 1
    Type: Central Processor
    Family: Xeon
    Manufacturer: Intel
    ID: D7 06 02 00 FF FB EB BF
    Signature: Type 0, Family 6, Model 45, Stepping 7
    Flags:
        FPU (Floating-point unit on-chip)
        VME (Virtual mode extension)
        DE (Debugging extension)
        PSE (Page size extension)
        TSC (Time stamp counter)
        MSR (Model specific registers)
        PAE (Physical address extension)
        MCE (Machine check exception)
        CX8 (CMPXCHG8 instruction supported)
        APIC (On-chip APIC hardware supported)
        SEP (Fast system call)
        MTRR (Memory type range registers)
        PGE (Page global enable)
        MCA (Machine check architecture)
        CMOV (Conditional move instruction supported)
        PAT (Page attribute table)
        PSE-36 (36-bit page size extension)
        CLFSH (CLFLUSH instruction supported)
        DS (Debug store)
        ACPI (ACPI supported)
        MMX (MMX technology supported)
        FXSR (FXSAVE and FXSTOR instructions supported)
        SSE (Streaming SIMD extensions)
        SSE2 (Streaming SIMD extensions 2)
        SS (Self-snoop)
        HTT (Multi-threading)
        TM (Thermal monitor supported)
        PBE (Pending break enabled)
    Version: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
    Voltage: 0.8 V
    External Clock: 100 MHz
    Max Speed: 4000 MHz
    Current Speed: 2000 MHz
    Status: Populated, Enabled
    Upgrade: Other
    L1 Cache Handle: 0x0005
    L2 Cache Handle: 0x0006
    L3 Cache Handle: 0x0007
    Serial Number:
    Asset Tag:
    Part Number:
    Core Count: 6
    Core Enabled: 6
    Thread Count: 6
    Characteristics:
        64-bit capable

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L1-Cache
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 384 kB
    Maximum Size: 384 kB
    Supported SRAM Types:
        Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: 8-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L2-Cache
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Varies With Memory Address
    Location: Internal
    Installed Size: 1536 kB
    Maximum Size: 1536 kB
    Supported SRAM Types:
        Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: 8-way Set-associative

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L3-Cache
    Configuration: Enabled, Not Socketed, Level 3
    Operational Mode: Varies With Memory Address
    Location: Internal
    Installed Size: 15360 kB
    Maximum Size: 15360 kB
    Supported SRAM Types:
        Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: 24-way Set-associative

Handle 0x0008, DMI type 4, 42 bytes
Processor Information
    Socket Designation: CPU 2
    Type: Central Processor
    Family: <OUT OF SPEC>
    Manufacturer: Not Specified
    ID: 00 00 00 00 00 00 00 00
    Version: Not Specified
    Voltage: 0.2 V
    External Clock: 100 MHz
    Max Speed: 4000 MHz
    Current Speed: Unknown
    Status: Unpopulated
    Upgrade: <OUT OF SPEC>
    L1 Cache Handle: Not Provided
    L2 Cache Handle: Not Provided
    L3 Cache Handle: Not Provided
    Serial Number: Not Specified
    Asset Tag: Not Specified
    Part Number: Not Specified
    Characteristics:
        64-bit capable

Handle 0x0009, DMI type 126, 19 bytes
Inactive

Handle 0x000A, DMI type 126, 19 bytes
Inactive

Handle 0x000B, DMI type 126, 19 bytes
Inactive

Handle 0x000C, DMI type 126, 42 bytes
Inactive

Handle 0x000D, DMI type 126, 19 bytes
Inactive

Handle 0x000E, DMI type 126, 19 bytes
Inactive

Handle 0x000F, DMI type 126, 19 bytes
Inactive

Handle 0x0010, DMI type 126, 42 bytes
Inactive

Handle 0x0011, DMI type 126, 19 bytes
Inactive

Handle 0x0012, DMI type 126, 19 bytes
Inactive

Handle 0x0013, DMI type 126, 19 bytes
Inactive

Handle 0x003A, DMI type 11, 5 bytes
OEM Strings
    String 1: To Be Filled By O.E.M.
    String 2: To Be Filled By O.E.M.
    String 3: To Be Filled By O.E.M.

Handle 0x003C, DMI type 13, 22 bytes
BIOS Language Information
    Language Description Format: Long
    Installable Languages: 1
        en|US|iso8859-1
    Currently Installed Language: en|US|iso8859-1

Handle 0x003E, DMI type 16, 15 bytes
Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: Single-bit ECC
    Maximum Capacity: 256 GB
    Error Information Handle: Not Provided
    Number Of Devices: 8

Handle 0x003F, DMI type 19, 15 bytes
Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x003FFFFFFFF
    Range Size: 16 GB
    Physical Array Handle: 0x003E
    Partition Width: 1

Handle 0x0040, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: 8192 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_A1
    Bank Locator: NODE 0 CHANNEL 0 DIMM 0
    Type: DDR3
    Type Detail: Synchronous
    Speed: 1600 MHz
    Manufacturer: Kingston
    Serial Number: 662C89DD
    Asset Tag: Unknown
    Part Number: 9965516-051.A00LF
    Rank: 2

Handle 0x0041, DMI type 20, 19 bytes
Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x001FFFFFFFF
    Range Size: 8 GB
    Physical Device Handle: 0x0040
    Memory Array Mapped Address Handle: 0x003F
    Partition Row Position: 1

Handle 0x0042, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_A2
    Bank Locator: NODE 0 CHANNEL 0 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0043, DMI type 126, 19 bytes
Inactive

Handle 0x0044, DMI type 126, 28 bytes
Inactive

Handle 0x0045, DMI type 126, 19 bytes
Inactive

Handle 0x0046, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: 8192 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_B1
    Bank Locator: NODE 0 CHANNEL 1 DIMM 0
    Type: DDR3
    Type Detail: Synchronous
    Speed: 1600 MHz
    Manufacturer: Kingston
    Serial Number: 701B9B41
    Asset Tag: Unknown
    Part Number: 9965516-051.A00LF
    Rank: 2

Handle 0x0047, DMI type 20, 19 bytes
Memory Device Mapped Address
    Starting Address: 0x00200000000
    Ending Address: 0x003FFFFFFFF
    Range Size: 8 GB
    Physical Device Handle: 0x0046
    Memory Array Mapped Address Handle: 0x003F
    Partition Row Position: 1

Handle 0x0048, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_B2
    Bank Locator: NODE 0 CHANNEL 1 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0049, DMI type 126, 19 bytes
Inactive

Handle 0x004A, DMI type 126, 28 bytes
Inactive

Handle 0x004B, DMI type 126, 19 bytes
Inactive

Handle 0x004C, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_C1
    Bank Locator: NODE 0 CHANNEL 2 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x004D, DMI type 126, 19 bytes
Inactive

Handle 0x004E, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_C2
    Bank Locator: NODE 0 CHANNEL 2 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x004F, DMI type 126, 19 bytes
Inactive

Handle 0x0050, DMI type 126, 28 bytes
Inactive

Handle 0x0051, DMI type 126, 19 bytes
Inactive

Handle 0x0052, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_D1
    Bank Locator: NODE 0 CHANNEL 3 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0053, DMI type 126, 19 bytes
Inactive

Handle 0x0054, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x003E
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_D2
    Bank Locator: NODE 0 CHANNEL 3 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0055, DMI type 126, 19 bytes
Inactive

Handle 0x0056, DMI type 126, 28 bytes
Inactive

Handle 0x0057, DMI type 126, 19 bytes
Inactive

Handle 0x0058, DMI type 16, 15 bytes
Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: Single-bit ECC
    Maximum Capacity: 256 GB
    Error Information Handle: Not Provided
    Number Of Devices: 8

Handle 0x0059, DMI type 126, 15 bytes
Inactive

Handle 0x005A, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_E1
    Bank Locator: NODE 1 CHANNEL 0 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x005B, DMI type 126, 19 bytes
Inactive

Handle 0x005C, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_E2
    Bank Locator: NODE 1 CHANNEL 0 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x005D, DMI type 126, 19 bytes
Inactive

Handle 0x005E, DMI type 126, 28 bytes
Inactive

Handle 0x005F, DMI type 126, 19 bytes
Inactive

Handle 0x0060, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_F1
    Bank Locator: NODE 1 CHANNEL 1 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0061, DMI type 126, 19 bytes
Inactive

Handle 0x0062, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_F2
    Bank Locator: NODE 1 CHANNEL 1 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0063, DMI type 126, 19 bytes
Inactive

Handle 0x0064, DMI type 126, 28 bytes
Inactive

Handle 0x0065, DMI type 126, 19 bytes
Inactive

Handle 0x0066, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_G1
    Bank Locator: NODE 1 CHANNEL 2 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0067, DMI type 126, 19 bytes
Inactive

Handle 0x0068, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_G2
    Bank Locator: NODE 1 CHANNEL 2 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x0069, DMI type 126, 19 bytes
Inactive

Handle 0x006A, DMI type 126, 28 bytes
Inactive

Handle 0x006B, DMI type 126, 19 bytes
Inactive

Handle 0x006C, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_H1
    Bank Locator: NODE 1 CHANNEL 3 DIMM 0
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x006D, DMI type 126, 19 bytes
Inactive

Handle 0x006E, DMI type 17, 28 bytes
Memory Device
    Array Handle: 0x0058
    Error Information Handle: Not Provided
    Total Width: 72 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_H2
    Bank Locator: NODE 1 CHANNEL 3 DIMM 1
    Type: Unknown
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: NO DIMM
    Serial Number: NO DIMM
    Asset Tag: Unknown
    Part Number: NO DIMM
    Rank: Unknown

Handle 0x006F, DMI type 126, 19 bytes
Inactive

Handle 0x0070, DMI type 126, 28 bytes
Inactive

Handle 0x0071, DMI type 126, 19 bytes
Inactive

Handle 0x0072, DMI type 126, 15 bytes
Inactive

Handle 0x0073, DMI type 126, 15 bytes
Inactive

Handle 0x0074, DMI type 126, 28 bytes
Inactive

Handle 0x0075, DMI type 126, 19 bytes
Inactive

Handle 0x0076, DMI type 126, 28 bytes
Inactive

Handle 0x0077, DMI type 126, 19 bytes
Inactive

Handle 0x0078, DMI type 126, 28 bytes
Inactive

Handle 0x0079, DMI type 126, 19 bytes
Inactive

Handle 0x007A, DMI type 126, 28 bytes
Inactive

Handle 0x007B, DMI type 126, 19 bytes
Inactive

Handle 0x007C, DMI type 126, 28 bytes
Inactive

Handle 0x007D, DMI type 126, 19 bytes
Inactive

Handle 0x007E, DMI type 126, 28 bytes
Inactive

Handle 0x007F, DMI type 126, 19 bytes
Inactive

Handle 0x0080, DMI type 126, 28 bytes
Inactive

Handle 0x0081, DMI type 126, 19 bytes
Inactive

Handle 0x0082, DMI type 126, 28 bytes
Inactive

Handle 0x0083, DMI type 126, 19 bytes
Inactive

Handle 0x0084, DMI type 126, 28 bytes
Inactive

Handle 0x0085, DMI type 126, 19 bytes
Inactive

Handle 0x0086, DMI type 126, 28 bytes
Inactive

Handle 0x0087, DMI type 126, 19 bytes
Inactive

Handle 0x0088, DMI type 126, 28 bytes
Inactive

Handle 0x0089, DMI type 126, 19 bytes
Inactive

Handle 0x008A, DMI type 126, 28 bytes
Inactive

Handle 0x008B, DMI type 126, 19 bytes
Inactive

Handle 0x008C, DMI type 126, 15 bytes
Inactive

Handle 0x008D, DMI type 126, 15 bytes
Inactive

Handle 0x008E, DMI type 126, 28 bytes
Inactive

Handle 0x008F, DMI type 126, 19 bytes
Inactive

Handle 0x0090, DMI type 126, 28 bytes
Inactive

Handle 0x0091, DMI type 126, 19 bytes
Inactive

Handle 0x0092, DMI type 126, 28 bytes
Inactive

Handle 0x0093, DMI type 126, 19 bytes
Inactive

Handle 0x0094, DMI type 126, 28 bytes
Inactive

Handle 0x0095, DMI type 126, 19 bytes
Inactive

Handle 0x0096, DMI type 126, 28 bytes
Inactive

Handle 0x0097, DMI type 126, 19 bytes
Inactive

Handle 0x0098, DMI type 126, 28 bytes
Inactive

Handle 0x0099, DMI type 126, 19 bytes
Inactive

Handle 0x009A, DMI type 126, 28 bytes
Inactive

Handle 0x009B, DMI type 126, 19 bytes
Inactive

Handle 0x009C, DMI type 126, 28 bytes
Inactive

Handle 0x009D, DMI type 126, 19 bytes
Inactive

Handle 0x009E, DMI type 126, 28 bytes
Inactive

Handle 0x009F, DMI type 126, 19 bytes
Inactive

Handle 0x00A0, DMI type 126, 28 bytes
Inactive

Handle 0x00A1, DMI type 126, 19 bytes
Inactive

Handle 0x00A2, DMI type 126, 28 bytes
Inactive

Handle 0x00A3, DMI type 126, 19 bytes
Inactive

Handle 0x00A4, DMI type 126, 28 bytes
Inactive

Handle 0x00A5, DMI type 126, 19 bytes
Inactive

Handle 0x00A7, DMI type 32, 20 bytes
System Boot Information
    Status: No errors detected

Handle 0x00AC, DMI type 38, 16 bytes
IPMI Device Information
    Interface Type: KCS (Keyboard Control Style)
    Specification Version: 2.0
    I2C Slave Address: 0x10
    NV Storage Device: Not Present
    Base Address: 0x0000000000000CA2 (I/O)

Handle 0x003D, DMI type 131, 45 bytes
OEM-specific Type
    Header and Data:
        83 2D 3D 00 01 33 33 00 00 00 00 00 00 11 00 00
        00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        00 00 00 00 00 00 00 00 00 00 00 00 00

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: J9A1 — Serial Port A
    External Connector Type: DB-9 male
    Port Type: Serial Port 16550A Compatible

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: J1C3 — Serial Port B
    External Connector Type: 9 Pin Dual Inline (pin 10 cut)
    Port Type: Serial Port 16550A Compatible

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A2 — Rear USB 0
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A2 — Rear USB 1
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A1 — Rear USB 2
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A1 — Rear USB 3
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1D4
    Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
    External Reference Designator: Front USB 0
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1D4
    Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
    External Reference Designator: Front USB 1
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: J8A1 — VGA
    External Connector Type: DB-15 female
    Port Type: Video Port

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A2 — NIC 1
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA7A1 — NIC 2
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA6A1 — NIC 3
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: Not Specified
    Internal Connector Type: None
    External Reference Designator: JA6A1 — NIC 4
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1K5 — Internal USB
    Internal Connector Type: Access Bus (USB)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: USB

Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J3K3 — TPM
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1C1 — RMM4
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1B2 — RMM4 Lite
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J3H2 — Zepher Module
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1J2 — SATA 0
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SATA

Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1H6 — SATA 1
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SATA

Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1F3 — SAS 0
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SAS

Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1F4 — SAS 1
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SAS

Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1G1 — SAS 2
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SAS

Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1G3 — SAS 4
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SAS

Handle 0x002E, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: J1H2 — SAS 6
    Internal Connector Type: SAS/SATA Plug Receptacle
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: SAS

Handle 0x002B, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 6
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:03.2

Handle 0x002D, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 5
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:80:02.0

Handle 0x002F, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 4
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:02.2

Handle 0x0030, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 3
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:02.0

Handle 0x0031, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 2
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:03.0

Handle 0x0032, DMI type 9, 17 bytes
System Slot Information
    Designation: Slot 1
    Type: x8 Other
    Current Usage: Available
    Length: Long
    Characteristics:
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:01.0

Handle 0x0033, DMI type 10, 6 bytes
On Board Device Information
    Type: Video
    Status: Enabled
    Description: ServerEngines Pilot III

Handle 0x0034, DMI type 10, 6 bytes
On Board Device Information
    Type: Ethernet
    Status: Enabled
    Description: PowerVille

Handle 0x0035, DMI type 10, 6 bytes
On Board Device Information
    Type: SAS Controller
    Status: Enabled
    Description: SCU

Handle 0x0036, DMI type 10, 6 bytes
On Board Device Information
    Type: SATA Controller
    Status: Enabled
    Description: PCH Integrated SATA Controller

Handle 0x0037, DMI type 12, 5 bytes
System Configuration Options
    Option 1: J1F1 2-3: Close to clear Password
    Option 2: J1D2 2-3: Close to clear CMOS
    Option 3: J1D3 2-3: Close for BIOS Recovery
    Option 4: J1E3 2-3: Close to Force ME Update Mode
    Option 5: J1E4 2-3: Close to Force BMC Update Mode
    Option 6: J1E2 2-3: Close to enable on-line update
    Option 7: J1B1: OPEN To inform users that chassis has been opened
    Option 8: J1D1: RAID key
    Option 9: J3K1: CLOSE To boot with MFG mode

Handle 0x0038, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: ServerEngines Pilot III
    Type: Video
    Status: Enabled
    Type Instance: 0
    Bus Address: 0000:09:00.0

Handle 0x0039, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: PowerVille
    Type: Ethernet
    Status: Enabled
    Type Instance: 0
    Bus Address: 0000:07:00.0

Handle 0x003B, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: SCU
    Type: SAS Controller
    Status: Enabled
    Type Instance: 0
    Bus Address: 0000:06:00.0

Handle 0x00A8, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: PCH Integrated SATA Controller
    Type: SATA Controller
    Status: Enabled
    Type Instance: 0
    Bus Address: 0000:00:1f.2

Handle 0x00A6, DMI type 24, 5 bytes
Hardware Security
    Power-On Password Status: Disabled
    Keyboard Password Status: Not Implemented
    Administrator Password Status: Enabled
    Front Panel Reset Status: Disabled

Handle 0x00AD, DMI type 127, 4 bytes
End Of Table

*******************************************************************************
Note:

installing the kernel source of Centos 6.3, copying the 05.40 megaraid_sas version for RHEL 6.3, recompiling the kernel and using this version of megaraid_sas, the machine was very stable, occurring only 1 freeze using bonnie++. The situation was more stable I got so far in this environment.

[root@server1 MegaRaid]# modinfo megaraid_sas
filename: /lib/modules/2.6.32/kernel/drivers/scsi/megaraid/megaraid_sas.ko
description: LSI MegaRAID SAS Driver
author: megaraidlinux@lsi.com
version: 00.00.05.40
license: GPL
srcversion: 1CCC0BEC3B68130D540151A
alias: pci:v00001000d0000005Bsv*sd*bc*sc*i*
alias: pci:v00001028d00000015sv*sd*bc*sc*i*
alias: pci:v00001000d00000413sv*sd*bc*sc*i*
alias: pci:v00001000d00000071sv*sd*bc*sc*i*
alias: pci:v00001000d00000073sv*sd*bc*sc*i*
alias: pci:v00001000d00000079sv*sd*bc*sc*i*
alias: pci:v00001000d00000078sv*sd*bc*sc*i*
alias: pci:v00001000d0000007Csv*sd*bc*sc*i*
alias: pci:v00001000d00000060sv*sd*bc*sc*i*
alias: pci:v00001000d00000411sv*sd*bc*sc*i*
depends:
vermagic: 2.6.32 SMP mod_unload modversions
parm: poll_mode_io:Complete cmds from IO path, (default=0) (int)
parm: max_sectors:Maximum number of sectors per IO command (int)
parm: msix_disable:Disable MSI-X interrupt handling. Default: 0 (int)

http://forum.parallels.com/printthread.php?t=114475

*******************************************************************************

[root@server1 MegaRaid]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E5/Core i7 DMI2 [8086:3c00] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1a [8086:3c02] (rev 07)
00:02.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2a [8086:3c04] (rev 07)
00:02.2 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2c [8086:3c06] (rev 07)
00:03.0 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode [8086:3c08] (rev 07)
00:03.2 PCI bridge [0604]: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3c [8086:3c0a] (rev 07)
00:04.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 0 [8086:3c20] (rev 07)
00:04.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 1 [8086:3c21] (rev 07)
00:04.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 2 [8086:3c22] (rev 07)
00:04.3 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 3 [8086:3c23] (rev 07)
00:04.4 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 4 [8086:3c24] (rev 07)
00:04.5 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 5 [8086:3c25] (rev 07)
00:04.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 6 [8086:3c26] (rev 07)
00:04.7 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DMA Channel 7 [8086:3c27] (rev 07)
00:05.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Address Map, VTd_Misc, System Management [8086:3c28] (rev 07)
00:05.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Control Status and Global Errors [8086:3c2a] (rev 07)
00:05.4 PIC [0800]: Intel Corporation Xeon E5/Core i7 I/O APIC [8086:3c2c] (rev 07)
00:11.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port [8086:1d3e] (rev 06)
00:16.0 Communication controller [0780]: Intel Corporation C600/X79 series chipset MEI Controller #1 [8086:1d3a] (rev 05)
00:16.1 Communication controller [0780]: Intel Corporation C600/X79 series chipset MEI Controller #2 [8086:1d3b] (rev 05)
00:1a.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 [8086:1d2d] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 [8086:1d10] (rev b6)
00:1c.7 PCI bridge [0604]: Intel Corporation C600/X79 series chipset PCI Express Root Port 8 [8086:1d1e] (rev b6)
00:1d.0 USB controller [0c03]: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #1 [8086:1d26] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation C600/X79 series chipset LPC Controller [8086:1d41] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation C600/X79 series chipset 6-Port SATA AHCI Controller [8086:1d02] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation C600/X79 series chipset SMBus Host Controller [8086:1d22] (rev 06)
02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2208 [Thunderbolt] [1000:005b] (rev 01)
06:00.0 Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset 4-Port SATA Storage Control Unit [8086:1d6b] (rev 06)
06:00.3 SMBus [0c05]: Intel Corporation C600/X79 series chipset SMBus Controller 0 [8086:1d70] (rev 06)
07:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
07:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
07:00.2 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
07:00.3 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
09:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 05)
ff:08.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 QPI Link 0 [8086:3c80] (rev 07)
ff:09.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 QPI Link 1 [8086:3c90] (rev 07)
ff:0a.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Power Control Unit 0 [8086:3cc0] (rev 07)
ff:0a.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Power Control Unit 1 [8086:3cc1] (rev 07)
ff:0a.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Power Control Unit 2 [8086:3cc2] (rev 07)
ff:0a.3 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Power Control Unit 3 [8086:3cd0] (rev 07)
ff:0b.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Interrupt Control Registers [8086:3ce0] (rev 07)
ff:0b.3 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Semaphore and Scratchpad Configuration Registers [8086:3ce3] (rev 07)
ff:0c.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0c.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0c.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0c.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 0 [8086:3cf4] (rev 07)
ff:0c.7 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 System Address Decoder [8086:3cf6] (rev 07)
ff:0d.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0d.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0d.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Unicast Register 0 [8086:3ce8] (rev 07)
ff:0d.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller System Address Decoder 1 [8086:3cf5] (rev 07)
ff:0e.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Processor Home Agent [8086:3ca0] (rev 07)
ff:0e.1 Performance counters [1101]: Intel Corporation Xeon E5/Core i7 Processor Home Agent Performance Monitoring [8086:3c46] (rev 07)
ff:0f.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Registers [8086:3ca8] (rev 07)
ff:0f.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller RAS Registers [8086:3c71] (rev 07)
ff:0f.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 0 [8086:3caa] (rev 07)
ff:0f.3 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 1 [8086:3cab] (rev 07)
ff:0f.4 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 2 [8086:3cac] (rev 07)
ff:0f.5 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 3 [8086:3cad] (rev 07)
ff:0f.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Target Address Decoder 4 [8086:3cae] (rev 07)
ff:10.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 0 [8086:3cb0] (rev 07)
ff:10.1 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 1 [8086:3cb1] (rev 07)
ff:10.2 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 0 [8086:3cb2] (rev 07)
ff:10.3 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 1 [8086:3cb3] (rev 07)
ff:10.4 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 2 [8086:3cb4] (rev 07)
ff:10.5 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller Channel 0-3 Thermal Control 3 [8086:3cb5] (rev 07)
ff:10.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 2 [8086:3cb6] (rev 07)
ff:10.7 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Integrated Memory Controller ERROR Registers 3 [8086:3cb7] (rev 07)
ff:11.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 DDRIO [8086:3cb8] (rev 07)
ff:13.0 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 R2PCIe [8086:3ce4] (rev 07)
ff:13.1 Performance counters [1101]: Intel Corporation Xeon E5/Core i7 Ring to PCI Express Performance Monitor [8086:3c43] (rev 07)
ff:13.4 Performance counters [1101]: Intel Corporation Xeon E5/Core i7 QuickPath Interconnect Agent Ring Registers [8086:3ce6] (rev 07)
ff:13.5 Performance counters [1101]: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 0 Performance Monitor [8086:3c44] (rev 07)
ff:13.6 System peripheral [0880]: Intel Corporation Xeon E5/Core i7 Ring to QuickPath Interconnect Link 1 Performance Monitor [8086:3c45] (rev 07)

Источник

Понравилась статья? Поделить с друзьями:

Читайте также:

  • Control ошибка device removed
  • Control лицо врага баг как исправить
  • Control как изменить одежду
  • Control system tracking error
  • Control service startup error

    • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии