Could not clear dns cache getexitcodeprocess failed with error 1 proxifier

The ipconfig tool that is built-in to the Windows operating system is very useful for administrators to display all TCP/IP network configurations. It can also be used to test the computer’s connectivity between the DHCP server and the workstation by using the /release and /renew command line options. Most normal computer users don’t really need to use this tool but there is actually a very useful command line option which is the “flushdns“.

The ipconfig tool describes the flushdns option as purging the DNS resolver cache. By default every Windows computer is configured to automatically cache name queries resolution because the IP address attached to a domain name doesn’t normally change very often. Hence caching the DNS will save a little bit of your bandwidth and time by not having to check with a DNS server every time you visit a website.

The flushdns command line option in ipconfig merely clears the DNS cache on your computer. This is particularly useful when a website’s IP address has changed and you’re still hitting on the old one because the DNS cache for the domain name hasn’t expired.

Flushing your computer’s local DNS cache can be done by typing the command below in command prompt.

ipconfig /flushdns

It is possible that you’re getting an error message “Could not flush the DNS Resolver Cache: Function failed during execution” after typing the command above.

This problem is most likely caused by a service called DNS Client being disabled on the computer which by default is automatically started with Windows. To re-enable the DNS Client service:

1. Press WIN+R to bring up the Run dialog box.

2. Type services.msc in Run and click OK.

3. Look for DNS Client in the name column and double click on it.

4. If the startup type is disabled, simply click on the drop down menu and select Automatic. Click Apply and followed by clicking on the Start button. Alternatively you can also reboot your computer and the DNS Client service will automatically start by itself.

If you are having trouble following the steps above, simply download this batch file and run it as administrator. It will automatically configure DNS Client to automatically start with Windows and instantly start the service.

If for some unknown reason the DNS Client service is unable to start, any errors are logged in Event Viewer because the service runs under the Network service account. Press WIN + R, type eventvwr, click OK, expand Windows Logs > System.

There is a debate whether to disable or enable the DNS Client service permanently. Some argue that disabling the DNS Service will save some memory usage making the computer faster, while enabling it will cause the websites to load faster. After a simple test, we find that the the DNS Client service uses up only 256KB of memory. So disabling it shouldn’t really give you any noticeable performance boost and it requires an additional round trip to check with the DNS servers for resolving a domain name to IP address.

Additional Tip: The resolved DNS cache can be viewed by typing the command ipconfig /displaydns. If the list is too long for the command prompt to show all the DNS cache, you can export all the results by using the greater-than sign which is >. An example command would be “ipconfig /displaydns > cached-dns.txt”.

@nicolas-grekas thanks for your reply.

I’m running Release v4.0.9, Is homestead considered a legacy container ?

Running :
rm -R /home/vagrant/Code/symfony/my-project/var/cache/local
rm -R /home/vagrant/Code/symfony/my-project/var/cache/loca~

before `composer require server –dev` seems to have worked.

But know getting `There are no commands defined in the «server» namespace.`

I’m just trying to work through the following guide ?

https://symfony.com/doc/current/setup.html

Thanks,

Lee.

Sent from Mail for Windows 10

From: Javier Eguiluz
Sent: 04 May 2018 15:54
To: symfony/symfony
Cc: Lee Perry; Mention
Subject: Re: [symfony/symfony] Script cache:clear returned with error code 1(#27154)

@lperry65 thanks for opening this issue and I’m sorry you faced this issue while evaluating Symfony. Sadly when using Vagrant, containers, etc, things may be a bit more complex to setup than when using native operating systems. But we’ll try to help you debug this problem!
By the way, we recently merged a bug fix (#27061) that maybe is related to this somehow? @nicolas-grekas what do you think? Thanks!
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or mute the thread.

Network error codes

In the case of network errors (e.g. a connection to a proxy server fails) Proxifier outputs error code numbers. These are the standard Winsock error codes. This section contains the codes of network errors and their description.

WSAEACCES
(10013)
Permission denied.
An attempt was made to access a socket in a way forbidden by its access permissions.
An example is using a broadcast address for sendto without broadcast permission
being set using setsockopt(SO_BROADCAST).
Another possible reason for the WSAEACCES error is that when the bind function
is called (on Windows NT 4 SP4 or later), another application, service, or kernel
mode driver is bound to the same address with exclusive access. Such exclusive
access is a new feature of Windows NT 4 SP4 and later, and is implemented by
using the SO_EXCLUSIVEADDRUSE option.

WSAEADDRINUSE
(10048)
Address already in use.
Typically, only one usage of each socket address (protocol/IP address/port)
is permitted. This error occurs if an application attempts to bind a socket
to an IP address/port that has already been used for an existing socket, or
a socket that was not closed properly, or one that is still in the process of
closing. For server applications that need to bind multiple sockets to the same
port number, consider using setsockopt(SO_REUSEADDR). Client applications usually
need not call bind at all—connect chooses an unused port automatically.
When bind is called with a wildcard address (involving ADDR_ANY), a WSAEADDRINUSE
error could be delayed until the specific address is committed. This could happen
with a call to another function later, including connect, listen, WSAConnect,
or WSAJoinLeaf.

WSAEADDRNOTAVAIL
(10049)
Cannot assign requested address.
The requested address is not valid in its context. This normally results from
an attempt to bind to an address that is not valid for the local machine. This
can also result from connect, sendto, WSAConnect, WSAJoinLeaf, or WSASendTo
when the remote address or port is not valid for a remote machine (for example,
address or port 0).

WSAEAFNOSUPPORT
(10047)
Address family not supported by protocol family.
An address incompatible with the requested protocol was used. All sockets are
created with an associated address family (that is, AF_INET for Internet Protocols)
and a generic protocol type (that is, SOCK_STREAM). This error is returned if
an incorrect protocol is explicitly requested in the socket call, or if an address
of the wrong family is used for a socket, for example, in sendto.

WSAEALREADY
(10037)
Operation already in progress.
An operation was attempted on a nonblocking socket with an operation already
in progress—that is, calling connect a second time on a nonblocking socket
that is already connecting, or canceling an asynchronous request (WSAAsyncGetXbyY)
that has already been canceled or completed.

WSAECONNABORTED
(10053)
Software caused connection abort.
An established connection was aborted by the software in your host machine,
possibly due to a data transmission time-out or protocol error.

WSAECONNREFUSED
(10061)
Connection refused.
No connection could be made because the target machine actively refused it.
This usually results from trying to connect to a service that is inactive on
the foreign host—that is, one with no server application running.

WSAECONNRESET
(10054)
Connection reset by peer.
An existing connection was forcibly closed by the remote host. This normally
results if the peer application on the remote host is suddenly stopped, the
host is rebooted, or the remote host uses a hard close (see setsockopt for more
information on the SO_LINGER option on the remote socket.) This error may also
result if a connection was broken due to keep-alive activity detecting a failure
while one or more operations are in progress. Operations that were in progress
fail with WSAENETRESET. Subsequent operations fail with WSAECONNRESET.

WSAEDESTADDRREQ
(10039)
Destination address required.
A required address was omitted from an operation on a socket. For example, this
error is returned if sendto is called with the remote address of ADDR_ANY.

WSAEFAULT
(10014)
Bad address.
The system detected an invalid pointer address in attempting to use a pointer
argument of a call. This error occurs if an application passes an invalid pointer
value, or if the length of the buffer is too small. For instance, if the length
of an argument, which is a SOCKADDR structure, is smaller than the sizeof(SOCKADDR).

WSAEHOSTDOWN
(10064)
Host is down.
A socket operation failed because the destination host is down. A socket operation
encountered a dead host. Networking activity on the local host has not been
initiated. These conditions are more likely to be indicated by the error WSAETIMEDOUT.

WSAEHOSTUNREACH
(10065)
No route to host.
A socket operation was attempted to an unreachable host. See WSAENETUNREACH.

WSAEINPROGRESS
(10036)
Operation now in progress.
A blocking operation is currently executing. Windows Sockets only allows a single
blocking operation—per- task or thread—to be outstanding, and if
any other function call is made (whether or not it references that or any other
socket) the function fails with the WSAEINPROGRESS error.

WSAEINTR
(10004)
Interrupted function call.
A blocking operation was interrupted by a call to WSACancelBlockingCall.

WSAEINVAL
(10022)
Invalid argument.
Some invalid argument was supplied (for example, specifying an invalid level
to the setsockopt function). In some instances, it also refers to the current
state of the socket—for instance, calling accept on a socket that is not
listening.

WSAEISCONN
(10056)
Socket is already connected.
A connect request was made on an already-connected socket. Some implementations
also return this error if sendto is called on a connected SOCK_DGRAM socket
(for SOCK_STREAM sockets, the to parameter in sendto is ignored) although other
implementations treat this as a legal occurrence.

WSAEMFILE
(10024)
Too many open files.
Too many open sockets. Each implementation may have a maximum number of socket
handles available, either globally, per process, or per thread.

WSAEMSGSIZE
(10040)
Message too long.
A message sent on a datagram socket was larger than the internal message buffer
or some other network limit, or the buffer used to receive a datagram was smaller
than the datagram itself.

WSAENETDOWN
(10050)
Network is down.
A socket operation encountered a dead network. This could indicate a serious
failure of the network system (that is, the protocol stack that the Windows
Sockets DLL runs over), the network interface, or the local network itself.

WSAENETRESET
(10052)
Network dropped connection on reset.
The connection has been broken due to keep-alive activity detecting a failure
while the operation was in progress. It can also be returned by setsockopt if
an attempt is made to set SO_KEEPALIVE on a connection that has already failed.

WSAENETUNREACH
(10051)
Network is unreachable.
A socket operation was attempted to an unreachable network. This usually means
the local software knows no route to reach the remote host.

WSAENOBUFS
(10055)
No buffer space available.
An operation on a socket could not be performed because the system lacked sufficient
buffer space or because a queue was full.

WSAENOPROTOOPT
(10042)
Bad protocol option.
An unknown, invalid or unsupported option or level was specified in a getsockopt
or setsockopt call.

WSAENOTCONN
(10057)
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected
and (when sending on a datagram socket using sendto) no address was supplied.
Any other type of operation might also return this error—for example,
setsockopt setting SO_KEEPALIVE if the connection has been reset.

WSAENOTSOCK
(10038)
Socket operation on nonsocket.
An operation was attempted on something that is not a socket. Either the socket
handle parameter did not reference a valid socket, or for select, a member of
an fd_set was not valid.

WSAEOPNOTSUPP
(10045)
Operation not supported.
The attempted operation is not supported for the type of object referenced.
Usually this occurs when a socket descriptor to a socket that cannot support
this operation is trying to accept a connection on a datagram socket.

WSAEPFNOSUPPORT
(10046)
Protocol family not supported.
The protocol family has not been configured into the system or no implementation
for it exists. This message has a slightly different meaning from WSAEAFNOSUPPORT.
However, it is interchangeable in most cases, and all Windows Sockets functions
that return one of these messages also specify WSAEAFNOSUPPORT.

WSAEPROCLIM
(10067)
Too many processes.
A Windows Sockets implementation may have a limit on the number of applications
that can use it simultaneously. WSAStartup may fail with this error if the limit
has been reached.

WSAEPROTONOSUPPORT
(10043)
Protocol not supported.
The requested protocol has not been configured into the system, or no implementation
for it exists. For example, a socket call requests a SOCK_DGRAM socket, but
specifies a stream protocol.

WSAEPROTOTYPE
(10041)
Protocol wrong type for socket.
A protocol was specified in the socket function call that does not support the
semantics of the socket type requested. For example, the ARPA Internet UDP protocol
cannot be specified with a socket type of SOCK_STREAM.

WSAESHUTDOWN
(10058)
Cannot send after socket shutdown.
A request to send or receive data was disallowed because the socket had already
been shut down in that direction with a previous shutdown call. By calling shutdown
a partial close of a socket is requested, which is a signal that sending or
receiving, or both have been discontinued.

WSAESOCKTNOSUPPORT
(10044)
Socket type not supported.
The support for the specified socket type does not exist in this address family.
For example, the optional type SOCK_RAW might be selected in a socket call,
and the implementation does not support SOCK_RAW sockets at all.

WSAETIMEDOUT
(10060)
Connection timed out.
A connection attempt failed because the connected party did not properly respond
after a period of time, or the established connection failed because the connected
host has failed to respond.

WSATYPE_NOT_FOUND
(10109)
Class type not found.
The specified class was not found.

WSAEWOULDBLOCK
(10035)
Resource temporarily unavailable.
This error is returned from operations on nonblocking sockets that cannot be
completed immediately, for example recv when no data is queued to be read from
the socket. It is a nonfatal error, and the operation should be retried later.
It is normal for WSAEWOULDBLOCK to be reported as the result from calling connect
on a nonblocking SOCK_STREAM socket, since some time must elapse for the connection
to be established.

WSAHOST_NOT_FOUND
(11001)
Host not found.
No such host is known. The name is not an official host name or alias, or it
cannot be found in the database(s) being queried. This error may also be returned
for protocol and service queries, and means that the specified name could not
be found in the relevant database.

WSA_INVALID_HANDLE
(OS dependent)
Specified event object handle is invalid.
An application attempts to use an event object, but the specified handle is
not valid.

WSA_INVALID_PARAMETER
(OS dependent)
One or more parameters are invalid.
An application used a Windows Sockets function which directly maps to a Win32
function. The Win32 function is indicating a problem with one or more parameters.

WSAINVALIDPROCTABLE
(OS dependent)
Invalid procedure table from service provider.
A service provider returned a bogus procedure table to Ws2_32.dll. (Usually
caused by one or more of the function pointers being null.)

WSAINVALIDPROVIDER
(OS dependent)
Invalid service provider version number.
A service provider returned a version number other than 2.0.

WSA_IO_INCOMPLETE
(OS dependent)
Overlapped I/O event object not in signaled state.
The application has tried to determine the status of an overlapped operation
which is not yet completed. Applications that use WSAGetOverlappedResult (with
the fWait flag set to FALSE) in a polling mode to determine when an overlapped
operation has completed, get this error code until the operation is complete.

WSA_IO_PENDING
(OS dependent)
Overlapped operations will complete later.
The application has initiated an overlapped operation that cannot be completed
immediately. A completion indication will be given later when the operation
has been completed.

WSA_NOT_ENOUGH_MEMORY
(OS dependent)
Insufficient memory available.
An application used a Windows Sockets function that directly maps to a Win32
function. The Win32 function is indicating a lack of required memory resources.

WSANOTINITIALISED
(10093)
Successful WSAStartup not yet performed.
Either the application has not called WSAStartup or WSAStartup failed. The application
may be accessing a socket that the current active task does not own (that is,
trying to share a socket between tasks), or WSACleanup has been called too many
times.

WSANO_DATA
(11004)
Valid name, no data record of requested type.
The requested name is valid and was found in the database, but it does not have
the correct associated data being resolved for. The usual example for this is
a host name-to-address translation attempt (using gethostbyname or WSAAsyncGetHostByName)
which uses the DNS (Domain Name Server). An MX record is returned but no A record—indicating
the host itself exists, but is not directly reachable.

WSANO_RECOVERY
(11003)
This is a nonrecoverable error.
This indicates some sort of nonrecoverable error occurred during a database
lookup. This may be because the database files (for example, BSD-compatible
HOSTS, SERVICES, or PROTOCOLS files) could not be found, or a DNS request was
returned by the server with a severe error.

WSAPROVIDERFAILEDINIT
(OS dependent)
Unable to initialize a service provider.
Either a service provider’s DLL could not be loaded (LoadLibrary failed) or
the provider’s WSPStartup/NSPStartup function failed.

WSASYSCALLFAILURE
(OS dependent)
System call failure.
Returned when a system call that should never fail does. For example, if a call
to WaitForMultipleObjects fails or one of the registry functions fails trying
to manipulate the protocol/name space catalogs.

WSASYSNOTREADY
(10091)
Network subsystem is unavailable.
This error is returned by WSAStartup if the Windows Sockets implementation cannot
function at this time because the underlying system it uses to provide network
services is currently unavailable. Users should check:
That the appropriate Windows Sockets DLL file is in the current path.
That they are not trying to use more than one Windows Sockets implementation
simultaneously. If there is more than one Winsock DLL on your system, be sure
the first one in the path is appropriate for the network subsystem currently
loaded.
The Windows Sockets implementation documentation to be sure all necessary components
are currently installed and configured correctly.

WSATRY_AGAIN
(11002)
Nonauthoritative host not found.
This is usually a temporary error during host name resolution and means that
the local server did not receive a response from an authoritative server. A
retry at some time later may be successful.

WSAVERNOTSUPPORTED
(10092)
Winsock.dll version out of range.
The current Windows Sockets implementation does not support the Windows Sockets
specification version requested by the application. Check that no old Windows
Sockets DLL files are being accessed.

WSAEDISCON
(10101)
Graceful shutdown in progress.
Returned by WSARecv and WSARecvFrom to indicate that the remote party has initiated
a graceful shutdown sequence.

WSA_OPERATION_ABORTED
(OS dependent)
Overlapped operation aborted.
An overlapped operation was canceled due to the closure of the socket, or the
execution of the SIO_FLUSH command in WSAIoctl.

инструкции

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Значение Can not clear DNS Cache?

Невозможно очистить DNS-кеш — это имя ошибки, содержащее сведения об ошибке, в том числе о том, почему она произошла, какой системный компонент или приложение вышло из строя, чтобы вызвать эту ошибку вместе с некоторой другой информацией. Численный код в имени ошибки содержит данные, которые могут быть расшифрованы производителем неисправного компонента или приложения. Ошибка, использующая этот код, может возникать во многих разных местах внутри системы, поэтому, несмотря на то, что она содержит некоторые данные в ее имени, пользователю все же сложно определить и исправить причину ошибки без особых технических знаний или соответствующего программного обеспечения.

Причины Не удается очистить кэш DNS?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Can not clear DNS Cache» error is a failure to correctly run one of its normal operations by a system or application component.

More info on
Can not clear DNS Cache

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

Thanks.
 

I am sorry, I do not understand what your reply means. I also ran CCleaner, so Itunes to purchase new songs. Oh… I checked with the help there and it says to clear sure your network is active and try again».

I can not get onto and that did not help.
 

Anyone have a suggestion as to why I can not get onto and router but strike three. I get a window that says «Make it is running or not? How do I check if ITunes or if it is the DNS Cache, how to clean it?

Я запустил исправление microsoft. Я перезагрузил свой модем в своем кэше DNS, перейдя в cmd и набрав ipconfig / flushdns. Наверное, это забастовка 4.
Как очистить кеш и очистить баран на моей Lumia 730?

Некоторые из них предоставляют все, что вы можете сделать. Из-за кеша мой телефон работает медленно, поэтому, пожалуйста, ответьте. И я сомневаюсь, что ОЗУ является проблемой здесь, в первом варианте для очистки этих файлов. Это довольно удачное удаление.

Некоторые приложения хранят свои собственные скоро. ОЗУ не связано с кешированием. Теперь поместите, поскольку WP имеет очень хороший способ обработки своих ресурсов. кэшированные файлы в их изолированном хранилище.

не удается очистить кеш ARP

Очистить кэш-диск CD-Rom?

dns cache-clear

Я пытаюсь очистить свой кеш DNS и ipconfig / flushdns и нажать enter. Перейдите в меню «Пуск / Выполнить» и попробуйте несколько способов поиска в Google. Это очищает (очищает) версию обновления xp от размера DELL 4100. Все из них были безуспешными: я бегу, что ты устал?

В командной строке введите тип CMD и нажмите клавишу ввода. Вы не сказали кеш DNS-резольвера.

Очистить кеш ARP (снова)

I just finished adding a computer to our business network (small business) and my internet started running very slow. have an easy solution… I know you guys Thanks. I’ve since started the computer back at a previous place, so

at least now it’s only my ARP Cache to be cleared. Melissa
 

Как очистить кеш приложения

Есть ли способ очистить их. Я попросил Lumia помочь, и они сказали скачать Lumia sd card ?? Что касается приложения для проверки хранилища (старого приложения win8), но он проверяет только память телефона. Любое решение, которое он показывает 0), нажмите delete.

Вы попробовали Storage Sense (стандартное приложение в списке приложений)
Откройте его, а затем вы можете выбрать телефон или SD-карту. И удалите временные файлы (даже если у вас много памяти в виде кеша приложений. Приложения, такие как musixmatch, твиттер, не пользующийся хорошими приложениями для очистки для нас. Его грустно, что есть для него ????

очистить кеш

Что такое кеш? и как я могу это очистить ???

Поскольку доступ к ОЗУ намного быстрее, чем чтение данных с жесткого диска, это хранит небольшие объемы информации рядом с процессором. Большинство веб-браузеров позволяют вам настраивать страницы, изображения и URL-адреса недавно созданных веб-сайтов на вашем жестком диске. Поскольку доступ к жесткому диску вашего компьютера намного быстрее, чем доступ к гораздо более эффективному, тем самым ускоряя время вычисления.

интересно, что это.

Другим типом кэша является кеш процессора, кэш которого является дисковым кэшем. Это хранит информацию, которую вы недавно прочитали, с места, где ее можно получить очень быстро. Это помогает сделать обработку общих инструкций размером кеша в предпочтительных браузерах. С этой опрятной стратегией, когда вы посещаете страницу, с которой вы недавно были, страницы и изображения не нужно загружать на компьютер снова и снова.

Как очистить кеш?

Кроме того, мой системный кэш — это 31484kb, и я только пост:
http://forums.techguy.org/showthread.php?threadid=46711
 

Невозможно очистить URL-адрес 16 от кеша URL-адреса в IE6. Помогите.

Все основания, на которые нужно обратить внимание, просто должны выяснить, где они находятся, и все же эти 16 продолжают появляться. Любые идеи,

как очистить кеш-память?

Вы имеете в виду, как показано здесь концерт 4.7?

Как очистить кеш

Как очистить кеш ARP

Go to Start > Services» and double left-click it.

Как очистить кеш в IE9?

Добрый день,
My ‘braindeadness’ is showing itself again. Many thanks they are ‘both’ cleared or then again, neither!! in anticipation. Anyway, willing to try and comply I have looked through the

So if someone can tell me what I ‘Tools’ option in IE9 but can not find anything about the cache! Of course I may be dreaming and Amazon, and who are now driving my wife and myself bananas with their unhelpfulness. I have been having a problem with an order I tried to place with am doing wrong I would be very grateful. here > http://kb.wisc.edu/page.php?id=15141

Поглядеть

Кэш не очищает

Не удается очистить кеш DNS .. сеть все еще не работает!

XP Home edition. I have Windows I even realised that gpedite.msc I’m using the Desktop which is connected directly (wired) to the D-Link. But I couldn’t enter workin after I Cleared the DNS Cache.

Кеш Firefox не будет очищать

I have completely uninstalled and reinstalled it, after clear, no matter what I do. Could someone work before I put my addons back on, NoScript and WebNotifier. I’m using Firefox 3.0.13, Windows Vista Home Basic, and it didnt please help me? I can’t find any other answers on what trying to do the tools way of clearing it.

Я довольно близка к работе, но вы попробовали очистить кеш-аддон FF?

Есть ли способ очистить USB-кеш-файл?

Решено: как очистить кэш URL

Is there a way to clear out the «go to» cache on the url location bar on Netscape Communicator 4.5? Sometimes I have to type in google.com to get there.

как очистить папки кэша

Если это интернет-кеш CCleaner халява сделает это за вас. Пожалуйста, вернитесь и сообщите нам об итогах. Как можно очистить папки кэша. Какие папки кэша вы имеете в виду?

← Вернуться в раздел «Программы»

Страницы: 123

Предыдущая тема: Захват видео с экрана монитора

Форум Ru-Board.club — поднят 15-09-2016 числа. Цель — сохранить наследие старого Ru-Board, истории становления российского интернета. Сделано для людей.