Createprofile failed org freedesktop dbus error

Да, пожалуй, не вариант понижать CUPS. Очень много зависимостей...

23.08.2020

Да, пожалуй, не вариант понижать CUPS. Очень много зависимостей…

oko


24.08.2020

to Art74
Что-то неверно добавили — проверил, при использовании репозитория Debian пакет libcupsimage2:i386 имеется и устанавливается (впрочем, он для начала требует установки libcups:i386 и проч.)…
У вас обновление apt update после добавления репозитория корректно проходит? Если нет, попробуйте вместо https использовать http…

24.08.2020

Вот эту штуку я не сделал в прошлый раз sudo apt install debian-archive-keyring dirmngr
Поэтому не получалось поставить libcupsimage2:i386.
Сейчас поставил apt install libcups2:i386 libcupsimage2:i386 libcupsfilters1:i386
И все зависимости слетели. В «Пуске» много софта потерялось: Панель управления пропала, в разделе Системные почти ничего не осталось, Менеджер файлов пропал, все браузеры и т.д. Система покалечилась капитально. Стала 32bit? Или я что-то не так сделал?

oko


24.08.2020

to Art74
Похожу, что все, увы, верно…
Как вариант, взять свежеустановленную 32-битную версию libcupsimage.so.2, выделить еще одну виртуалку, накатить на нее Astra Linux и подсунуть исключительно эту библиотеку по пути /usr/lib. А дальше смотреть, на что пойдет ругань (и, при необходимости, подсовывать остальные зависимые библиотеки 32-версии)…
Вообще, надо бы спросить людей, пересобравших CUPS, с какого перепугу их версия требует 32-версии libcupsimage.so.2…

24.08.2020

А, подскажите, откуда теперь выдернуть 32-битную версию libcupsimage.so.2?
/usr/lib/x86_64-linux-gnu/ тут не нашел

24.08.2020

sudo find / -name libcupsimage.so.2 что-то молчит

oko


24.08.2020

to Art74
Либо вы все-таки не доставили libcupsimage2:i386, либо не так ищите…
Проверил — да, все ломается, но нужные библиотеки появляются в /usr/lib/i386-linux-gnu…
Ловите архив с CUPS-библиотеками под i386. Забросьте их в /usr/lib (разумеется, с бэкапом первичных файлов с теми же именами, если они имеются в /usr/lib) на целевой системе и проверьте работу термопринтера…

  • 315.3 КБ
    Просмотры: 297

oko


24.08.2020

to Art74
Не за что :)
Хотя несколько не понял: в итоге использование 3 данных i386-библиотек в /usr/lib позволило запустить ваш термопринтер через CUPS без ошибок?
Если так, то просьба: оформите сообщение о данной баге через баг-трекер Astra Linux, чтобы разработчики учли недостатки текущей самопальной версии CUPS…

24.08.2020

Да, эти 3 библиотеки которые Вы мне отправили я скопировал в /usr/lib.
Только логи не глядел еще, не успел. Но тестовая страница такая красивая вышла — Логотип Астра Линукс.
И в ПО проверил — талоны печатает.
Только приходится размер бумаги фиксированный ставить и при каждом запуске системы выбирать нужный размер под конкретный принтер.
Принтера два: один лазерный, второй термопринтер и вот приходится выбирать А4 или 80*80 в зависимости от принтера. Немного неудобно.
А по-умолчанию поди никак не привязать размер бумаги 80*80 к термопринтеру?
А в этот баг-трекер я закидывал свою проблему — до сих пор «ожидает ответа». Оформлю обязательно.

25.08.2020

access.log:
localhost — — [25/Aug/2020:10:02:25 +0500] «POST /printers/%D0%A2%D0%B0%D0%BB%D0%BE%D0%BD HTTP/1.1» 200 16499 Print-Job successful-ok

error.log:
E [25/Aug/2020:12:54:11 +0500] Syntax error on line 46 of printers.conf.
W [25/Aug/2020:12:54:11 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

Всё печатается.

  • Screenshot_3.png

    123 КБ
    Просмотры: 254

  • IMG_20200825_101123.jpg

    170.8 КБ
    Просмотры: 245

15.12.2020

Такие темы можно закрепить как «полезные», пока разработчики пакет не собрали

Дед


17.01.2022

access.log:
localhost — — [25/Aug/2020:10:02:25 +0500] «POST /printers/%D0%A2%D0%B0%D0%BB%D0%BE%D0%BD HTTP/1.1» 200 16499 Print-Job successful-ok

error.log:
E [25/Aug/2020:12:54:11 +0500] Syntax error on line 46 of printers.conf.
W [25/Aug/2020:12:54:11 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:54:11 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [25/Aug/2020:12:58:29 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

Всё печатается.

У меня тоже такая ошибка, печатает, но ошибка сидит, как побороть эту ошибку. поделитесь.

W [17/Jan/2022:07:42:55 +0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [17/Jan/2022:07:42:55 +0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

23.01.2022

У меня тоже такая ошибка, печатает, но ошибка сидит, как побороть эту ошибку. поделитесь.

Привет, Дед.
я не борол эту ошибку. Печатает же.

Дед


24.01.2022

Привет, Дед.
я не борол эту ошибку. Печатает же.

Да, печатает. В чате посоветовали не обращать внимания на эту ошибку. Это, наверно, из-за черно-белого принтера. Был бы цветной, то не было бы ошибки, я так думаю, может и ошибаюсь.

View previous topic :: View next topic  
Author Message
pking
n00b
n00b

Joined: 11 Sep 2009
Posts: 61

PostPosted: Thu Sep 12, 2013 1:32 am    Post subject: cups failure with strange error messages… Reply with quote

In the past week or so, cups has stopped working for me — perhaps since the upgrade to 1.6.2. But the error messages are

quite uninformative, and it isn’t clear how to go about fixing it. Here’s what shows up in /var/log/cups/err_log:

Code:

W [03/Sep/2013:11:06:43 -0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [11/Sep/2013:16:27:07 -0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [11/Sep/2013:16:27:07 -0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [11/Sep/2013:16:27:07 -0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [11/Sep/2013:16:27:07 -0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files



In the web interface, on the other hand, I get the message «Filter failed».

The printer is an HP LaserJet 1300, and works with Foomatic/pxlmono (recommended), and, as noted, worked reliably for well

over a year before developing the current problem.

Something similar seems to have happened on Ubuntu, where one supposed fix is to install avahi and run it before cups. I have

not tried that since I would rather not run avahi, but if that’s the only way to get cups to work I’ll do that.

Any suggestions for what to try? I’m running kernel 3.11.0, cups 1.6.2-r5, cups-filters 1.0.34-r1. I deeply hate cups.

Back to top

View user's profile Send private message

fidel
Guru
Guru

Joined: 16 Jul 2004
Posts: 407
Location: CH

PostPosted: Thu Sep 12, 2013 10:54 am    Post subject: Reply with quote

I’ve had similar issues — The problem shown in the log file seems to be an issue of cups itself, I hope it will be fixed soon. I made the printer work again by using a different driver. Since I’m not at home at the moment I cannot check which one I finally used. Try using another driver if possible (try the postscript driver if you were using another one and vice versa).

Good luck!

Back to top

View user's profile Send private message

pking
n00b
n00b

Joined: 11 Sep 2009
Posts: 61

PostPosted: Fri Sep 13, 2013 9:33 pm    Post subject: Reply with quote

Thanks for the suggestion. I’ve tried using two other printer drivers (both versions of

generic Postscript), and neither worked; they do offer an additional new error message

not given with the pxlmono driver, though:

Code:

E [13/Sep/2013:17:26:38 -0400] [cups-driverd] Bad driver information file «/usr/share/cups/drv/cupsfilters.drv»!

W [13/Sep/2013:17:27:42 -0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [13/Sep/2013:17:27:42 -0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files



However, throughout all the problems I’ve been able to print to a remote networked

printer with no problems — it’s only on the local USB HP 1300 LaserJet that there seems

to be a problem, so I don’t think I trust the «bad driver information file» message. But

I’ll try to reinstall CUPS to see whether that helps.

Still looking for suggestions!

(And I still hate CUPS.)

Back to top

View user's profile Send private message

pking
n00b
n00b

Joined: 11 Sep 2009
Posts: 61

PostPosted: Fri Sep 13, 2013 9:42 pm    Post subject: Reply with quote

Reinstallation of CUPS did not help.

Switching back to the pxlmono driver made the «bad driver information file» message

go away, but I still get the messages that CreateProfile and CreateDevice have failed,

and I still can’t print to the USB-connected HP 1300 LaserJet.

Aaarrgghhhh.

Back to top

View user's profile Send private message

fidel
Guru
Guru

Joined: 16 Jul 2004
Posts: 407
Location: CH

PostPosted: Sun Sep 15, 2013 9:19 am    Post subject: Reply with quote

Ah, its a directly connected usb printer — hm, have you made sure that usb printer support is disabled in kernel if the usb use flag is enabled for cups or vice versa (if usb printer support is in the kernel, the usb use flag for cups must be disabled, if no usb printer support is in the kernel, the usb use flag for cups must be enabled).

Still good luck!
Back to top

View user's profile Send private message

pking
n00b
n00b

Joined: 11 Sep 2009
Posts: 61

PostPosted: Tue Sep 17, 2013 6:18 pm    Post subject: [solved] Reply with quote

That seems to have done it — dueling USB drivers, I suppose. Anyway, I can print again,

which makes me much happier. Thanks for the help!
Back to top

View user's profile Send private message

pking
n00b
n00b

Joined: 11 Sep 2009
Posts: 61

PostPosted: Mon Dec 02, 2013 5:50 pm    Post subject: Reply with quote

It’s now a month or two later, and I’m back to having problems with cups.

Currently at cups 1.6.4, with a directly-connected HP LaserJet 1300.

Cups was emerged with the usb use flag, and usb printer support was disabled in the kernel.

I get the message «Printer Paused» every when trying to administer cups every time I try to print, even after

resuming the printer, and occasionally the message «filter not found». I get the problem with several different

drivers, e.g. pxlmono and Postscript for the HPLJ1300.

I can still print via cups with no problem to a networked printer — just the local one is problematic.

Any ideas? Anyone?

Back to top

View user's profile Send private message

init3
n00b
n00b

Joined: 26 Dec 2013
Posts: 21

PostPosted: Wed Mar 19, 2014 1:29 pm    Post subject: Reply with quote

Now =net-print/cups-1.7.1.

Remote b/w HP LaserJet 4350 Postscript (recommended) printer.

Similiar error messages in error_log since 02/Jul/2013:

Code:
W [19/Mar/2014:08:32:59 +0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [19/Mar/2014:08:32:59 +0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

P.S. Without any questions to printing facility itself.

Back to top

View user's profile Send private message

Gustavo Guillermo Pérez
n00b
n00b

Joined: 17 Jul 2004
Posts: 25
Location: Mexico/Argentina

PostPosted: Wed Apr 16, 2014 4:56 am    Post subject: Reply with quote

Similar problem with LexmarS409

Propietary Drivers.

After installation:

Code:
W [15/Apr/2014:23:42:25 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:42:25 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:42:25 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:42:46 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:42:46 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:42:46 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

E [15/Apr/2014:23:45:59 -0500] [Job 1] La impresora no responde.

E [15/Apr/2014:23:46:59 -0500] [Job 1] La impresora no responde.

W [15/Apr/2014:23:47:47 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:47:47 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:47:47 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

E [15/Apr/2014:23:50:19 -0500] [Job 1] (null)

E [15/Apr/2014:23:50:53 -0500] [Job 1] La impresora no responde.

W [15/Apr/2014:23:51:28 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:51:28 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [15/Apr/2014:23:51:28 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files


_________________
I learn something new every day. Thanks God.

Back to top

View user's profile Send private message

pierre.imbaud
n00b
n00b

Joined: 07 Oct 2015
Posts: 4
Location: Nanterre, France

PostPosted: Fri Dec 25, 2015 2:24 pm    Post subject: Reply with quote

I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!

It is not gentoo specific, it has been met eg on lubuntu.

My case: cups 2.0.3, brother dcp 9020 cdw, connected thru wifi. using generic postscript or pcl printer.

tail -5 /var/log/cups/error_log

W [24/Dec/2015:18:42:25 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

E [24/Dec/2015:21:48:02 +0100] [Job 17] Stopping unresponsive job.

About to try to install a driver from an alternate portage.
_________________
Pierre Imbaud

Back to top

View user's profile Send private message

pierre.imbaud
n00b
n00b

Joined: 07 Oct 2015
Posts: 4
Location: Nanterre, France

PostPosted: Fri Dec 25, 2015 7:16 pm    Post subject: Reply with quote

[quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!

It is not gentoo specific, it has been met eg on lubuntu.

My case: cups 2.0.3, brother dcp 9020 cdw, connected thru wifi. using generic postscript or pcl printer.

tail -5 /var/log/cups/error_log

W [24/Dec/2015:18:42:25 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

W [24/Dec/2015:18:42:42 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

E [24/Dec/2015:21:48:02 +0100] [Job 17] Stopping unresponsive job.

About to try to install a driver from an alternate portage.[/quote]

just installed net-print/brother-dcp9020cdw-bin, from hering overlay, not any better.
_________________
Pierre Imbaud

Back to top

View user's profile Send private message

pierre.imbaud
n00b
n00b

Joined: 07 Oct 2015
Posts: 4
Location: Nanterre, France

PostPosted: Sun Dec 27, 2015 6:15 pm    Post subject: Reply with quote

[quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!

About to try to install a driver from an alternate portage.[/quote]

Some progress.

uploaded and scanned cupsd code. Error comes from «colorman.c», talking on dbus, expecting an answer from colord.

So I installed colord, and now get a different error: CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id ‘Brother_DCP-9020CDW-Gray..

‘ already exists

3 packages seem to provide colord function (a daemon talking on dbus, storing «color profiles». One is gnome dependend, other is kde dependend, I picked up the third, being xfce. More tests to come. If I dont succeed turnaround would be to run cupsd on a debian vm. Nothing to be proud of!
_________________
Pierre Imbaud

Back to top

View user's profile Send private message

pierre.imbaud
n00b
n00b

Joined: 07 Oct 2015
Posts: 4
Location: Nanterre, France

PostPosted: Mon Dec 28, 2015 11:38 am    Post subject: Reply with quote

[quote=»pierre.imbaud»][quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!

About to try to install a driver from an alternate portage.[/quote]

Some progress.

uploaded and scanned cupsd code. Error comes from «colorman.c», talking on dbus, expecting an answer from colord.

So I installed colord, and now get a different error: CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id ‘Brother_DCP-9020CDW-Gray..

‘ already exists

3 packages seem to provide colord function (a daemon talking on dbus, storing «color profiles». One is gnome dependend, other is kde dependend, I picked up the third, being xfce. More tests to come. If I dont succeed turnaround would be to run cupsd on a debian vm. Nothing to be proud of![/quote]

My problem had nothing to do with color; the error occurred indeed, but was not fatal.

My problem was the fantasy name picked up by cupsd «network printer discovery».

All I had to do was to manually fill connexion: socket://hostname (the printer hostname known locally), rather than let discovered printer name.
_________________
Pierre Imbaud

Back to top

View user's profile Send private message

RAPHEAD
Tux’s lil’ helper
Tux's lil' helper

Joined: 20 Jun 2003
Posts: 134
Location: Germany

PostPosted: Tue Nov 22, 2016 8:26 am    Post subject: Reply with quote

Hi, could you solve this?
Back to top

View user's profile Send private message

Display posts from previous:   

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Содержание

  1. (РЕШЕНО) Brother HL-1110 series
  2. Karazyabra
  3. Createdevice failed org freedesktop dbus error serviceunknown the name

(РЕШЕНО) Brother HL-1110 series

Karazyabra

New member

Доброго дня,
Возникла необходимость настроить для работы принтер Brother HL-1110 series. Эти принтеры будут подключены как по USB, так и как «общедоступные» принтеры Windows и Astra Linux.
В качестве «испытательного полигона» использовалась Astra Linux CE 2.12, данный принтер на ней удалось относительно успешно поднять как через USB, так и подключиться к общедоступному на Windows10. Принтер успешно печатает, хотя в статусе и error_log пишет следующее — Завершено. «Use «pdftops-renderer» option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.»

Попытка повторить это на Astra Linux SE 1.7.2 не удалась.
Добавил архитектуру i386.
С офсайта скачал и установил hl1110lpr-3.0.1-1.i386.deb и hl1110cupswrapper-3.0.1-1.i386.deb
Пробовал ставить как через CUPS, так и через Менеджер принтеров Fly, а потом и через linux-brprinter-installer-2.2.3-1.

Результат один, при печати ничего не происходит, В столбце Статус — Завершено. «Use «pdftops-renderer» option (see cups-filters README file) to use Ghostscript or MuPDF for the PDF -> PostScript conversion.» В столбце «Пользователь» — «Приостановлено пользователем».

Пробовал сделать sudo lpadmin -p «Brother_HL-1110_series» -o pdftops-renderer-default=gs, но ничего не меняется и ошибка остается. (В случае уже печатающего принтера на испытательной Asrta Linux CE это помогло)

Источник

Createdevice failed org freedesktop dbus error serviceunknown the name

The printer is an HP LaserJet 1300, and works with Foomatic/pxlmono (recommended), and, as noted, worked reliably for well
over a year before developing the current problem.

Something similar seems to have happened on Ubuntu, where one supposed fix is to install avahi and run it before cups. I have
not tried that since I would rather not run avahi, but if that’s the only way to get cups to work I’ll do that.

Any suggestions for what to try? I’m running kernel 3.11.0, cups 1.6.2-r5, cups-filters 1.0.34-r1. I deeply hate cups. Вернуться к началу

fidel
Guru

Зарегистрирован: 16 июл 2004
Сообщений: 407
Откуда: CH

Добавлено: чт сен 12, 2013 10:54 am Заголовок сообщения:
I’ve had similar issues — The problem shown in the log file seems to be an issue of cups itself, I hope it will be fixed soon. I made the printer work again by using a different driver. Since I’m not at home at the moment I cannot check which one I finally used. Try using another driver if possible (try the postscript driver if you were using another one and vice versa).

Good luck!

Вернуться к началу

pking
n00b

Зарегистрирован: 11 сен 2009
Сообщений: 61

Добавлено: пт сен 13, 2013 9:33 pm Заголовок сообщения:
Thanks for the suggestion. I’ve tried using two other printer drivers (both versions of
generic Postscript), and neither worked; they do offer an additional new error message
not given with the pxlmono driver, though:

Код:
E [13/Sep/2013:17:26:38 -0400] [cups-driverd] Bad driver information file «/usr/share/cups/drv/cupsfilters.drv»!
W [13/Sep/2013:17:27:42 -0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [13/Sep/2013:17:27:42 -0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

However, throughout all the problems I’ve been able to print to a remote networked
printer with no problems — it’s only on the local USB HP 1300 LaserJet that there seems
to be a problem, so I don’t think I trust the «bad driver information file» message. But
I’ll try to reinstall CUPS to see whether that helps.

Still looking for suggestions!

(And I still hate CUPS.)

Вернуться к началу

pking
n00b

Зарегистрирован: 11 сен 2009
Сообщений: 61

Добавлено: пт сен 13, 2013 9:42 pm Заголовок сообщения:
Reinstallation of CUPS did not help.

Switching back to the pxlmono driver made the «bad driver information file» message
go away, but I still get the messages that CreateProfile and CreateDevice have failed,
and I still can’t print to the USB-connected HP 1300 LaserJet.

Aaarrgghhhh.

Вернуться к началу

fidel
Guru

Зарегистрирован: 16 июл 2004
Сообщений: 407
Откуда: CH

Добавлено: вс сен 15, 2013 9:19 am Заголовок сообщения:
Ah, its a directly connected usb printer — hm, have you made sure that usb printer support is disabled in kernel if the usb use flag is enabled for cups or vice versa (if usb printer support is in the kernel, the usb use flag for cups must be disabled, if no usb printer support is in the kernel, the usb use flag for cups must be enabled).
Still good luck!

Вернуться к началу

pking
n00b

Зарегистрирован: 11 сен 2009
Сообщений: 61

Добавлено: вт сен 17, 2013 6:18 pm Заголовок сообщения: [solved]
That seems to have done it — dueling USB drivers, I suppose. Anyway, I can print again,
which makes me much happier. Thanks for the help!

Вернуться к началу

pking
n00b

Зарегистрирован: 11 сен 2009
Сообщений: 61

Добавлено: пн дек 02, 2013 5:50 pm Заголовок сообщения:
It’s now a month or two later, and I’m back to having problems with cups.

Currently at cups 1.6.4, with a directly-connected HP LaserJet 1300.

Cups was emerged with the usb use flag, and usb printer support was disabled in the kernel.

I get the message «Printer Paused» every when trying to administer cups every time I try to print, even after
resuming the printer, and occasionally the message «filter not found». I get the problem with several different
drivers, e.g. pxlmono and Postscript for the HPLJ1300.

I can still print via cups with no problem to a networked printer — just the local one is problematic.

Any ideas? Anyone?

Вернуться к началу

init3
n00b

Зарегистрирован: 26 дек 2013
Сообщений: 21

Добавлено: ср мар 19, 2014 1:29 pm Заголовок сообщения:
Now =net-print/cups-1.7.1.
Remote b/w HP LaserJet 4350 Postscript (recommended) printer.

Similiar error messages in error_log since 02/Jul/2013:

Код:
W [19/Mar/2014:08:32:59 +0400] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [19/Mar/2014:08:32:59 +0400] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

P.S. Without any questions to printing facility itself.

Вернуться к началу

Gustavo Guillermo Pérez
n00b

Зарегистрирован: 17 июл 2004
Сообщений: 25
Откуда: Mexico/Argentina

Добавлено: ср апр 16, 2014 4:56 am Заголовок сообщения:
Similar problem with LexmarS409

Код:
W [15/Apr/2014:23:42:25 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:42:25 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:42:25 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:42:46 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:42:46 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:42:46 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
E [15/Apr/2014:23:45:59 -0500] [Job 1] La impresora no responde.
E [15/Apr/2014:23:46:59 -0500] [Job 1] La impresora no responde.
W [15/Apr/2014:23:47:47 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:47:47 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:47:47 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
E [15/Apr/2014:23:50:19 -0500] [Job 1] (null)
E [15/Apr/2014:23:50:53 -0500] [Job 1] La impresora no responde.
W [15/Apr/2014:23:51:28 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:51:28 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [15/Apr/2014:23:51:28 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

_________________
I learn something new every day. Thanks God.

Вернуться к началу

pierre.imbaud
n00b

Зарегистрирован: 07 окт 2015
Сообщений: 4
Откуда: Nanterre, France

Добавлено: пт дек 25, 2015 2:24 pm Заголовок сообщения:
I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!
It is not gentoo specific, it has been met eg on lubuntu.
My case: cups 2.0.3, brother dcp 9020 cdw, connected thru wifi. using generic postscript or pcl printer.
tail -5 /var/log/cups/error_log
W [24/Dec/2015:18:42:25 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
E [24/Dec/2015:21:48:02 +0100] [Job 17] Stopping unresponsive job.

About to try to install a driver from an alternate portage.
_________________
Pierre Imbaud

Вернуться к началу

pierre.imbaud
n00b

Зарегистрирован: 07 окт 2015
Сообщений: 4
Откуда: Nanterre, France

Добавлено: пт дек 25, 2015 7:16 pm Заголовок сообщения:
[quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!
It is not gentoo specific, it has been met eg on lubuntu.
My case: cups 2.0.3, brother dcp 9020 cdw, connected thru wifi. using generic postscript or pcl printer.
tail -5 /var/log/cups/error_log
W [24/Dec/2015:18:42:25 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [24/Dec/2015:18:42:42 +0100] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
E [24/Dec/2015:21:48:02 +0100] [Job 17] Stopping unresponsive job.

About to try to install a driver from an alternate portage.[/quote]

just installed net-print/brother-dcp9020cdw-bin, from hering overlay, not any better.
_________________
Pierre Imbaud

Вернуться к началу

pierre.imbaud
n00b

Зарегистрирован: 07 окт 2015
Сообщений: 4
Откуда: Nanterre, France

Добавлено: вс дек 27, 2015 6:15 pm Заголовок сообщения:
[quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!
.

About to try to install a driver from an alternate portage.[/quote]

uploaded and scanned cupsd code. Error comes from «colorman.c», talking on dbus, expecting an answer from colord.

So I installed colord, and now get a different error: CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id ‘Brother_DCP-9020CDW-Gray..
‘ already exists

3 packages seem to provide colord function (a daemon talking on dbus, storing «color profiles». One is gnome dependend, other is kde dependend, I picked up the third, being xfce. More tests to come. If I dont succeed turnaround would be to run cupsd on a debian vm. Nothing to be proud of!
_________________
Pierre Imbaud

Вернуться к началу

pierre.imbaud
n00b

Зарегистрирован: 07 окт 2015
Сообщений: 4
Откуда: Nanterre, France

Добавлено: пн дек 28, 2015 11:38 am Заголовок сообщения:
[quote=»pierre.imbaud»][quote=»pierre.imbaud»]I have exactly the same problem. I have been googling like mad, this thread is the best description of the problem, but it gives no solution!
.

About to try to install a driver from an alternate portage.[/quote]

uploaded and scanned cupsd code. Error comes from «colorman.c», talking on dbus, expecting an answer from colord.

So I installed colord, and now get a different error: CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id ‘Brother_DCP-9020CDW-Gray..
‘ already exists

3 packages seem to provide colord function (a daemon talking on dbus, storing «color profiles». One is gnome dependend, other is kde dependend, I picked up the third, being xfce. More tests to come. If I dont succeed turnaround would be to run cupsd on a debian vm. Nothing to be proud of![/quote]
My problem had nothing to do with color; the error occurred indeed, but was not fatal.
My problem was the fantasy name picked up by cupsd «network printer discovery».
All I had to do was to manually fill connexion: socket://hostname (the printer hostname known locally), rather than let discovered printer name.
_________________
Pierre Imbaud

Вернуться к началу

RAPHEAD
Tux’s lil’ helper

Зарегистрирован: 20 июн 2003
Сообщений: 134
Откуда: Germany

Добавлено: вт ноя 22, 2016 8:26 am Заголовок сообщения:
Hi, could you solve this?

Вернуться к началу

Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете голосовать в опросах

Copyright 2001-2023 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy

Источник

Adblock
detector

I have an HP inkjet printer connected to an lubuntu laptop with a USB cable, installed under CUPS as «inkjet». I can print with AbiWord OK, and a printer test page prints OK from the printer properties dialog, but if I try to print from the command line with «lpr -Pinkjet», nothing happens. I don’t get any error message, and the inkjet print queue shows as empty. lpstat shows the print queue as empty.

I am running Ubuntu 16.04.5 LTS. The printer driver is hp-envy_4510_series-hpijs.ppd.

Any ideas?

* Edit 11 Dec 2018 *

I see some error messages in the CUPS error log:

E [11/Dec/2018:09:08:43 -0500] Unknown directive JobPrivateAccess on line 85 of /etc/cups/cupsd.conf.
E [11/Dec/2018:09:08:43 -0500] Unknown directive JobPrivateValues on line 86 of /etc/cups/cupsd.conf.
E [11/Dec/2018:09:08:43 -0500] Unknown directive SubscriptionPrivateAccess on line 87 of /etc/cups/cupsd.conf.
E [11/Dec/2018:09:08:43 -0500] Unknown directive SubscriptionPrivateValues on line 88 of /etc/cups/cupsd.conf.
W [11/Dec/2018:09:08:48 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [11/Dec/2018:09:08:48 -0500] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
W [11/Dec/2018:09:08:48 -0500] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

I am too ignorant of CUPS to know what to do about them or to judge their severity, so I would appreciate any advice.

asked Dec 7, 2018 at 16:05

awkward's user avatar

7

I am new to Ubuntu and Linux, so I list a lot of basics you may be aware of.
I was using Bottle 43.2 ,USB cabled connecting to a Canon printer. All I could get at first, was worse than your issue, I was unable to print at all,but: only the «Green» LED basic power & «print mode» LED would blink using any way (icon or terminal).
This command identified my issue.

sudo hp-check -r

Never used distro you gave, but
Your terminal command may come in two steps:

$ su -

Puts you in «Super User» mode with your password.
Then,

$ hp-check-r

This indicated 2 problems: Found CUPS not configured properly & I had the wrong driver.

bummi's user avatar

bummi

3943 gold badges9 silver badges14 bronze badges

answered Dec 10, 2018 at 20:47

Fran Nicholson's user avatar

2

The problem was resolved by installing the cups-bsd package, as recommended in lp works but lpr does not. (If I had realized that lp was working, I might have found this answer sooner.)

I realize that it would be better to close this question and mark it as a duplicate, as recommended by unutbu, but I don’t have enough rep to vote to close, so I am posting this answer in an attempt to achieve some kind of closure.

answered Dec 14, 2018 at 13:43

awkward's user avatar

Hello everybody

First of all, sorry for my English. I recently installed Arch on my laptop (Dell Inspiron 5570) and I encountered a problem with printing.

I have an HP LaserJet P2055d connected to a mac computer that i want to connect to from my laptop. I have installed cups, hplip and avahi and I tried to follow the instructions of the wiki page about CUPS.
With

I get the uri of the printer:

network dnssd://HP%20LaserJet%20P2055d%20%40%20Amac._ipp._tcp.local/cups?uuid=3adeef9c-8a7f-3e59-78f0-b8f1eeade322

.
To find available drivers, I tried:

and the result is

drv:///hp/hpcups.drv/hp-laserjet_p2055d-pcl3.ppd HP LaserJet p2055d pcl3, hpcups 3.21.12
lsb/usr/HP/hp-laserjet_p2055d-pcl3.ppd.gz HP LaserJet p2055d pcl3, hpcups 3.21.12
drv:///hp/hpcups.drv/hp-laserjet_p2055dn-pcl3.ppd HP LaserJet p2055dn pcl3, hpcups 3.21.12
lsb/usr/HP/hp-laserjet_p2055dn-pcl3.ppd.gz HP LaserJet p2055dn pcl3, hpcups 3.21.12

I then tried to add a new queue for this printer according to the instructions of wiki. So I tried :

lpadmin -p LaserJet -E -v dnssd://HP%20LaserJet%20P2055d%20%40%20Amac._ipp._tcp.local/cups?uuid=3adeef9c-8a7f-3e59-78f0-b8f1eeade322 -m drv:///hp/hpcups.drv/hp-laserjet_p2055d-pcl3.ppd

Now this is interesting. I get no error messages in my terminal but two errors are reported in the file «/var/log/cups/error_log» :

CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

Because the LaserJet P2055d is not a color pinter I continued the process setting the printer as default, activating it and setting it to accept jobs:

lpoptions -d LaserJet
cupsenable LaserJet
cupsaccept LaserJet

Finally I tried to print the test page as

lpr /usr/share/cups/data/testprint

After typing this command printer seems to start processing the job because the «Ready» light starts blinking and the menu screen of the printer displays «Printing document». However this continues for ever and no page is actually ever printed. When typing :

I get:

LaserJet is ready and printing
Rank    Owner   Job     File(s)                         Total Size
active  stylian 10      testprint                       1024 bytes

I am very confused!!!!

Edit: After typing

printer printed a blank page with a little black rhombus in the upper left corner.

Last edited by styllag (2021-12-23 07:54:29)

  • Home
  • Forum
  • The Ubuntu Forum Community
  • Ubuntu Official Flavours Support
  • General Help
  • Lubuntu 13.04 — CUPS fails to start on bootup

  1. Lubuntu 13.04 — CUPS fails to start on bootup

    Lubuntu 13.04:

    CUPS is not starting at boot-up. I discovered this when attempting to install the printer with this new install. I then started CUPS from the terminal, was able to install the printer, and print. However, on restarting the computer, the service again fails to start. How do I configure this service to always automatically start on bootup?

    There is a Desktop Sessions Settings dialog of automatically started applications, but CUPS is not included there.

    Last edited by Dennis N; April 30th, 2013 at 04:19 PM.


  2. Re: CUPS fails to start on bootup

    open a terminal and give me the output of

    Code:

    head /etc/init/cups.conf

    I’ve not SEEN it configured wrong before, but I’ve never not not seen CUPS start on startup before either


  3. Re: CUPS fails to start on bootup

    Here is the output:

    Code:

    dn@Alexa:~$ head /etc/init/cups.conf
    # cups - CUPS Printing spooler and server
    
    description     "CUPS printing spooler/server"
    author          "Michael Sweet <msweet@apple.com>"
    
    start on (filesystem
              and started avahi-daemon
              and (started dbus or runlevel [2345]))
    stop on runlevel [016]


  4. Re: CUPS fails to start on bootup

    Look for clues in /var/log/cups.

    ————————————-
    Oooh Shiny: PopularPages

    Unumquodque potest reparantur. Patientia sit virtus.


  5. Re: CUPS fails to start on bootup

    I’m looking at the output I gave, and I am not a coder, but it looks to me like for cupsd to start avahi-daemon must be started first? Am I right or wrong?


  6. Re: CUPS fails to start on bootup

    avahi simply advertises services—in this case shared printers. It should not cause cupsd to fail. CUPS does not have a direct dependecy but «recommends» avahi-daemon, which means it should be able to run without avahi-daemon.

    If you are running 13.04, try the following:

    Code:

    sudo apt-get update
    sudo apt-get upgrade
    reboot

    Then check your printers.

    ————————————-
    Oooh Shiny: PopularPages

    Unumquodque potest reparantur. Patientia sit virtus.


  7. Re: CUPS fails to start on bootup

    Quote Originally Posted by tgalati4
    View Post

    Look for clues in /var/log/cups.

    As to the cups log files, here is part of the error log, with output from a session earlier this afternoon:

    Code:

    W [26/Apr/2013:13:23:26 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:23:26 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:23:26 -0700] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    E [26/Apr/2013:13:38:54 -0700] [cups-driverd] Bad driver information file "/usr/share/cups/drv/cupsfilters.drv"!
    W [26/Apr/2013:13:38:59 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:38:59 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:38:59 -0700] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:48:04 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:48:04 -0700] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files
    W [26/Apr/2013:13:48:04 -0700] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name org.freedesktop.ColorManager was not provided by any .service files

    Not sure these are that relevant to the cups-not-running problem — Lubuntu 12.10 on another computer shows similar errors (except for the bad driver information file line) and it prints normally.

    Thanks for pointing out the logs.


  8. Re: CUPS fails to start on bootup

    Quote Originally Posted by tgalati4
    View Post

    avahi simply advertises services—in this case shared printers. It should not cause cupsd to fail. CUPS does not have a direct dependecy but «recommends» avahi-daemon, which means it should be able to run without avahi-daemon.

    If you are running 13.04, try the following:

    Code:

    sudo apt-get update
    sudo apt-get upgrade
    reboot

    Then check your printers.

    I already tried this earlier. No effect.

    Yes, cupsd does not need avahi-daemon, and can run without it, but from the structure of the code, it appears to me that cupsd will not start unless avahi-daemon has been started first. Am I wrong on that interpretation?

    Next, I just found that avahi-daemon is not installed with Lubuntu 13.04:

    Code:

    dn@Alexa:~$ apt-cache policy avahi-daemon
    avahi-daemon:
      Installed: (none)
      Candidate: 0.6.31-1ubuntu3
      Version table:
         0.6.31-1ubuntu3 0
            500 http://us.archive.ubuntu.com/ubuntu/ raring/main i386 Packages

    It’s not installed on my Lubuntu 12.10 installation either, and Lubuntu 12.10 prints normally. But on 12.10, the cups.conf does not include any reference to avahi-daemon — here is the cups.conf from Lubuntu 12.10:

    Code:

    dn@Roxanne:~$ head /etc/init/cups.conf
    # cups - CUPS Printing spooler and server
    
    description     "CUPS printing spooler/server"
    author          "Michael Sweet <msweet@apple.com>"
    
    start on (filesystem
              and (started dbus or runlevel [2345]))
    stop on runlevel [016]
    
    respawn

    I think I need to install avahi-daemon, or else change the code to remove reference to it.

    Comment?


  9. Re: CUPS fails to start on bootup

    Well, I edited cups.conf and removed the line referring to avahi-daemon. I was correct — this was stopping cupsd from starting. Tested and confirmed this solution. Printing on Lubuntu 13.04 now works.

    Now, anyone who downloads and installs Lubuntu 13.04 from the same iso is going to be affected by the same problem.

    The iso is at:

    http://cdimage.ubuntu.com/lubuntu/re…sktop-i386.iso

    and has a misconfigured cups.conf that will prevent the cups-daemon from starting unless fixed.

    The corrected cups.conf begins:

    Code:

    # cups - CUPS Printing spooler and server
    
    description     "CUPS printing spooler/server"
    author          "Michael Sweet <msweet@apple.com>"
    
    start on (filesystem
              and (started dbus or runlevel [2345]))
    stop on runlevel [016]
    
    respawn

    Thanks to Synoc and tgalati4 for your input.


  10. Re: CUPS fails to start on bootup

    thanks for the tip. Solved this issue for me too.


Bookmarks

Bookmarks


Posting Permissions

Понравилась статья? Поделить с друзьями:
  • Createprocessasuser error 1314
  • Createprocess сбой код 267 неверно задано имя папки как исправить
  • Createprocess сбой код 2 не удается найти указанный файл как исправить ошибку
  • Createprocess returned 2 как исправить
  • Createprocess failure error 123