Cry of fear как изменить fov

Cheats

1. Warning: Team Psykskallar did not intend for cheats to be used in Cry of Fear, and you may be denied support if you choose to use cheats.
2. sv_cheats 1.
3. sv_maxspeed 999.
4. bind x « cl_forwardspeed 999 »
5. bind y « cl_forwardspeed 300 »
6. bind x « sv_gravity 800 »
7. bind y « sv_gravity -100 »
8. bind z « sv_gravity 100 »

in addition, How do you Noclip Half-Life?

1. Start Half-life Using The Command Line « Hl.exe -console ». You Can Now Access The Console Using The « ~ » Key.
2. Enter The Command « Sv_cheats 1 » In The Console. Cheats Are Now Enabled.
3. Here’s A Partial List Of Cheats.

Also, How do you skip the cry of fear intro?

For anyone wondering, pressing enter on the numpad skips them.

in the same way How do you heal in Cry of Fear? Health: In order to regain health in Cry of Fear, you must inject yourself with morphine, (a painkiller) which you find scattered in various places in the game. It can often be hard to spot because of how small they are. The morphine comes in little syringes. If you see one, go up to it and click ‘E.

How long does it take to beat cry of fear?

Updated:

How do I activate Noclip?

Cheats must be enabled for noclip to work. The second command is « noclip », which as the name might suggest, toggles noclip on and off. So, when you press P, sv_cheats 1 command will first enable cheats (if it isn’t already enabled) and then toggle noclip mode so that you can fly through walls, etc.

How do you BHOP in Half-Life?

In order to bunny hop in Half-Life and its expansions, you must strafe using the A/D keys while turning the mouse in that direction, i.e. if you strafe right, you turn your mouse right. By doing this, you will gain speed upon every successful jump. It’s important not to hold forward, or it will not work.

How do you skip the intro to hl1?

All you have to do is start OpFor with the cheats on, start a new game or boot camp, and type « map c0a0 » to start from the train, « map c1a0 » to skip the train intro, or « map t0a0 » for the hazard course. Now, just type « impulse 101 » to get all the weapons including those from OpFor!!!!!

How do you increase FOV in Cry of Fear?

As the name implies, you are going to multiply the default FOV value by a factor of X. A value of > 1 will increase the FOV while a value of < 1 will decrease it.

Where is the elevator code in Cry of Fear?

Upon playing the tape, Simon will be greeted by a video of the predator decapitating an individual with a pair of gardening sheers. The decapitated body falls onto the floor, and the camera pans over to the front, revealing the exit code for the elevator.

How do I turn off mouse acceleration in Cry of Fear?

Launch options

1. Right click the game in the Steam games list and select the properties item.
2. Click ‘set launch options’ under the general tab.
3. Paste the following into the window: « -noforcemparms »
4. Hit ok and you’re done.

What weapons should I keep in Cry of Fear?

Does cry of fear have jump scares?

Maybe there’s more to Half Life 1 mod Cry of Fear than screaming, gibbering faces and jump scares – the trailers have shooting, conversations and chainsaws – but my nerves, frayed rather than reinforced by years of vacationing in Silent Hill, failed to survive the opening scenes when I played last night.

How many endings does cry of fear have?

Cry of fear has four different endings, depending on the player’s choices. If Carcass wasn’t killed and Simon didn’t give the gun to the doctor, he kills Sophie, his therapist, and then himself.

How do you play coop on Cry of Fear 2021?

Create or join a server

1. Create red or join a red already created.
2. Open hamachi.
3. Click Red; Create new network.
4. Type any name in the network field identifier and set the password (optional).
5. Now give it to your friends.
6. Done.

Can you fly in Skyrim?

Dragon Riding is a new feature in Skyrim: Dragonborn that allows the player to tame and ride Dragons. … Once in the sky, the Dragon will begin a circular flight pattern, not unlike the Dragons you might see in the wild. You will not be able to directly control how the Dragon flies.

How do you cheat in Portal 2?

If you wanna use cheats: Esc > Options > Keyboard/Mouse > Allow Developer Console. Press the ` key (upper-left corner of your keyboard) to open the Developer Console. Most of these codes will not work unless cheats are activated (sv_cheats 1).

Why is it called Noclip?

The company’s name comes from « Noclip mode », a video game cheat that allows players to walk through walls. “With [Noclip], » says O’Dwyer, « we’re going to walk through gaming’s walls and take a peek at the other side.”

Can you still BHOP in Half Life 1?

Can you still bunny hop in half life 1? You‘ll need Bunnymod Pro to remove the speed cap, but yes, it’s still possible.

Can you Bunnyhop in Portal 2?

This item is incompatible with Portal 2. Please see the instructions page for reasons why this item might not work within Portal 2. This guide goes over how bhopping in portal works and how to abuse it to your advantage.

How can I speed up my hl2?

host_timescale is another console command for hl2 that allows you to change the speed the game runs at. You can change the value from 0.3 to a different speed too. 0 would be stopped, 1 would be regular speed, and 2 would be double.

How long is the train ride in half life?

Can you skip cutscenes Half Life 2?

Half Life 2’s unskippable dialogue sections are a complete slog and barely give the player any more control than a cutscene would at the expense of both directorial input and the ability to skip them altogether on a replay or simply out of disinterest.

How do you play multiplayer on Cry of Fear?

Cry of Fear – How to Play Co-op Mode in 2019?

1. Download Hamachi (If You Don’t Have) …
2. Create Network or Join to Already Created Network. …
3. Open Cry of Fear and Connect or Create Your Own Server. …
4. [IMPORTANT] If You Get an Error at Connect, Host Needs to Turn Off His Firewall. …
5. Enjoy Your Game.

What API does cry of fear use?

API

Jun 14, 2021

Do you need to port forward for Cry of Fear?

You don’t necessarily need the port number at the end of the command to connect, but you can use it if you like (the « :27015 »). Also added that you can left/right-click on IP next to Power Button and it gives you an option to « Copy IPv4 address ».

• Reference 1
• Reference 2
• Reference 3
• Reference 4

Introduction

WARNING: The use of some of these tricks, tips, and cheats might seriously ruin the immersive value of the game. It’s not recommended to use them on your first playthrough. Play the game, finish the game, and enjoy it for what it is the first time you play it. Some of these tricks also make use of unintended flaws in the game, and involve modifications to settings, and as such Team Psykskallar may deny you support.

Unlimited Ammo/Clips/Items

To start off with you will need to download cheat engine. You can get it here (warning: the installer contains adware, please choose carefully when you install the application).

Open cheat engine, and select the open process button (the button in the top right corner that looks like a computer screen with a magnifying glass). Select «cof.exe» from the list of processes and press open. Now follow the instructions below depending on what cheat it is you want to achieve. This stage must be performed regardless of the cheat you want to use.

Warning: Memory values reset after a map change, so if you wish to use these cheats, you’ll need to complete it before you move to another map, if you move to another map, start over.

Unlimited Bullets In Clip (No Reload):

This cheat will essentially give you a clip that contains unlimited ammunition (you’ll be able to fire an infinite number of shots without reloading or running out of ammunition). For starters you’ll need to know how much ammunition the clip of the gun you want to use the cheat on holds. You can find out on our list of weapons. Switch to the weapon you wish to use the cheat on, and ensure it has a full clip (for this example we will use the Taurus Revolver which has a 5 bullet clip). Alt+tab out of the game to cheat engine.

Enter the number of bullets in the clip into the search box, and press search, keep Cheat Engine’s values at their defaults (scan type as exact value, value type 4 bytes)

Now go back into the game and fire a shot, then pause the game and alt+tab to cheat engine. Now subtract 1 from the value in the search box and press «next scan»

Alt+tab back into the game, fire another shot, then repeat the above process again. Keep firing shots, and search subtracting 1 from the previous value. Carry on until there only 3 numbers left in the address window. Right click on the uppermost of the 3 remaining numbers

Select «change value of selected address» and set it to «999». The remaining addresses should now show 999, 999, and 25

Now, when you go back into the game, the magazine of the gun you’re using will appear to be empty, however it can still be fired. If so, congratulations, you performed the cheat properly.

Warning: if you reload the gun, it will reset itself and you’ll no longer have an infinite clip. Don’t reload the gun if you want the effect to remain.

Unlimited Bullets / Syringes:

The procedure is similar to the procedure above. If you want the challenge of reloading to remain, but want to give yourself unlimited ammunition (similar to the Famas), equip the weapon you want to achieve the effect on and note how many clips you currently have for it (if you’re looking to do it with syringes, equip the syringe and note how many you’re carrying).

Note: This cheat will not work on weapons that require clips, it will only work on weapons that use bullets, such as the Revolver and Shotgun.

Open cheat engine as detailed above. For this example the cheat will be performed with syringes.

Warning: This cheat will make it practically impossible to clear the slot that the syringes occupy in your inventory, so be sure to use your inventory wisely.

Search for the opening value in cheat engine

Now pick up another, or use one either by reloading, or injecting if it’s a syringe (warning: don’t use your last syringe). Then alt+tab out of the game and enter the new amount in the search box, and press next scan. Go back to the game and pick up or use another. As above, keep repeating this process until you’re left with 5 numbers. Go through them 1 by 1, and right click on them and change them to «999». Eventually, when you change one, all the rest of addresses will change to 999. When this happens, the cheat will have worked properly.

Now go back to the game. You will now see that you have 999 syringes / clips available (if this later changes to 254, don’t worry).

Using Doors Through Walls

Due to a known design feature of the goldsource engine upon which Cry Of Fear is built, in some places it is possible to use various items such as tape recorders and doors through walls. This will allow the player to skip some areas entirely, and speed up progress through the game.

Apartments: there are 4 occasions on which this trick can be used in the apartments. The first is when you climb the scaffolding to access the apartments. It is possible to use the door to enter floor 3 without climbing up the ladders. instead of using the ladder, jump across to the window box, and you can use the entrance through the ceiling. The second is when Simon first arrives on the second floor, and needs to obtain the hall door key to head towards the first floor elevator. It is possible to use the third floor door through the ceiling and bypass both the scene where Simon is locked in the room with the photos of the predator’s victims, and the sequence in which the Glock 19 and hall key are retrieved from the corpse. WARNING: as this bypasses the scene with the corpse, it will also prevent the player from acquiring the Glock, so it’s only recommended to do this if you have access to unlock weapons.

The other places this can be used are in the basement. Upon coming out of the basement after retrieving the tape with the elevator code (when you return to the flats it can also be used after acquiring the ladder from the now flooded basement), upon going up the stairs and leaving the basement, instead of using the door to floor 1, it is in fact possible through going up the first 3 stairs to use the door to floor 2 through the ceiling, cutting a significant chunk out of the travel.

Waspet Gardens: After you have dug up and acquired the key to the apartments and entered them, when you come face to face with the apartment on the first floor, it is possible to jump up and use the door to the apartment that grants access to the roof through the ceiling.

Skipping Syringe Animations

If the player stands next to a door, uses a syringe, then immediately walks through the door, the player will be healed without them having to watch the usual animation, which will save several seconds in time.

Mace Battle: Jumping To Avoid Shock

During the battle with mace, it is actually possible to avoid being damaged by the electric shocks without heading towards the platform. If you stay standing in the water, you’ll hear the electricity charging, and if you jump just as it’s about to discharge you will avoid taking damage as long as you time the jump properly.

Disabling Black & White Permanently

Unfortunately it isn’t possible to fully disable this setting in game, as for some reason the game changes it back again the next time you launch the application. However through a mod to a configuration file, it is possible to disable black and white mode permanently.

1: Navigate to your Steam folder (if you’re unsure how to find it, right click your Steam icon, select properties, and go to the «shortcut» tab, and click «open file location»)

2: Navigate to «SteamAppscommonCry Of Fearcryoffear», and open «autoexec.cfg». You be presented with a dialogue asking you what application you wish to open the file with. Select notepad from the list and press OK.

3: Add the following into a new line: gl_posteffects «0»

4: Close and save the file. From now on, whenever you launch the game black and white effect will be disabled in cutscenes and nightmare sequences

Changing Field Of Vision

Team Psykskallar have removed the usual command to change the field of vision in the game, however it is still possible to change it through a console command. Simply bring down the console using the «¬» key, and enter cl_fovmultiplier x (x being the number you want to enter. 1 is the default, 1.1 or 1.2 work best on most widescreen monitors).

WARNING: Setting this value too high will distort the game visually

Switching Weapons With Mouse Wheel

Under normal circumstances it’s impossible within the game to switch weapons using the mouse wheel, a feature the developers removed to force players to use quickslots, however it is still possible to do with third party software.

1: Download and install X Mouse Button Control from here

2: Add a profile for Cry Of Fear. Simply press add, use the option to browse for the EXE, navigate to «/steam/SteamApps/Cry Of Fear» and add cof.exe

3: Select cof.exe from the list, and under «Wheel Up» select «Simulated Keys» from the drop down menu. Enter «1» and press OK

4: Now do the same for «Wheel Down», and assign it to either number 2 or 3.

5: When you’re in game, assign the 2 weapons you use most frequently to the quickslot numbers you mapped out in steps 3 and 4. You should now be able to switch between them using the mouse wheel.

High Process Priority & Performance Tweaks

It has been reported by some users on the Cry of Fear forums that forcing the game into high priority mode resolves various issues with lag that some players experience. Depending on your graphics card maker, there are several ways this can be accomplished.

General: With Windows Task Manager (AMD, Intel & nVidia)

1: Once you have launched the game and the main menu is loaded, press the windows key on your keyboard to minimise the game.

2: Right click an empty area of the task bar and select «Task Manager».

3: If you’re using Windows 8, 8.1, or 10 select the «Details» tab. If you’re using Windows XP, Vista, or 7, select the «Processes» tab of task manager.

4: Locate «cof.exe» on the processes list. Right click it, select «set priority» and select high

5: Go back to the game

NOTE: You will have to do this every time you launch the game.

RadeonPro (AMD users only)

RadeonPro is a piece of software for users of AMD graphics cards, allowing them to use automated profiles for games.

1: Download and install RadeonPro from here

2: Add a profile for Cry Of Fear by clicking the new profile icon (shown below). Navigate to your Cry of Fear folder and add cof.exe

3: Cry Of Fear will appear on the list as «Half Life Launcher». Highlight the entry with your mouse, and select the «Tweaks» tab. Scroll down to «Misc Tweaks» and tick «Force Process High Priority».

4: Additionally, it’s recommended to have RadeonPro run on system startup so it can properly automate game settings so, additionally, go into the program’s settings (cog icon on the bar) and under general tick «Start With Windows» and «Start Minimised» (if you don’t want an annoying message box every time you boot, it’s also recommended to tick «Disable 64 bit support».

5: Although this step is optional, it may further boost performance to always force your GPU to operate at its full clock speed, to prevent the clock speed from fluctuating during gameplay and reducing potential lag. To do this, access the «Overdrive» tab (you’ll need to click the padlock icon to unlock overdrive mode). Tick «Enable Graphics Overdrive» and «Always Use Highest Performance Clocks While Gaming». Then scroll to the bottom and apply changes.

If any users are familiar with software similar to RadeonPro that would also work with nVidia cards, feel free to add instructions to this section

Although, when the team released Cry Of Fear on Steam as a standalone they took most of the game’s cheats out, it is still possible to alter some of the game’s client variables to cheat in various ways.

Warning: Team Psykskallar did not intend for cheats to be used in Cry of Fear, and you may be denied support if you choose to use cheats

Firstly, you’ll need to add a couple of things to your autoexec file. So locate and edit your autoexec.cfg file (as directed above, in the Disabling Black And White section), and add the following variables (each on a separate line):

sv_cheats 1

sv_maxspeed 999

Movement Speed:

This will allow you to alter the character’s forward movement speed in game (works for walking forwards, sprinting, and swimming). This process will involve binding commands to keys, so make sure that the keys you want to use aren’t already in use for other commands.

Bring down the console with «¬» or «~» and enter the following commands (replace X and Y with whatever keys you want to use)

bind x «cl_forwardspeed 999»

bind y «cl_forwardspeed 300»

If you enter the commands correctly, pressing X will speed up the character’s forward movement by around 333% (3.3x as fast), allowing you to cover large distances quickly, and pressing Y will return movement speed to normal. This will allow you to progress through the game and cover large areas more quickly. Particularly useful for swimming sections and backtracking sections

Gravity:

Altering gravity has many advantages, it will allow you to bypass some obstacles, jump over monsters, and skip ladder sequences. I would recommend having 3 keys. One for a negative gravity setting, one for a lower gravity setting, and one to return to normal (100 and -100 work well. 800 is normal). As above, replace X, Y, and Z with whatever keys you choose to use.

Bring down the console with «¬» or «~» and enter the following commands:

bind x «sv_gravity 800»

bind y «sv_gravity -100»

bind z «sv_gravity 100»

Pressing Y will be particularly useful for skipping extra long ladders, and pressing Z will be useful for shorter ladders, and obstacles. Once you’ve dodged your obstacle x will return the gravity level to normal

Brightness:

Changing the in game brightness will make it easier to navigate some darker areas, and although this setting can be changed from inside the game’s menu, you can also assign key commands to change this setting on the fly without entering the game’s menu, which will save a lot of time. As above replace X and Y with whatever keys you wish to use

Bring down the console with «¬» or «~» and enter the following commands:

bind x «gl_brightness 0.300000»

bind y «gl_brightness 0.000000» thank

Pressing X will increase the game’s brightness boost to the highest available value, and pressing Y will return it to normal.

Additional Information

This page will stay open for editing (at admin discretion), if the wiki’s readers find any more useful tips or tricks, they are welcome to add them to the article.

Introduction

WARNING: The use of some of these tricks, tips, and cheats might seriously ruin the immersive value of the game. It’s not recommended to use them on your first playthrough. Play the game, finish the game, and enjoy it for what it is the first time you play it. Some of these tricks also make use of unintended flaws in the game, and involve modifications to settings, and as such Team Psykskallar may deny you support.

Unlimited Ammo/Clips/Items

To start off with you will need to download cheat engine. You can get it here (warning: the installer contains adware, please choose carefully when you install the application).

Open cheat engine, and select the open process button (the button in the top right corner that looks like a computer screen with a magnifying glass). Select «cof.exe» from the list of processes and press open. Now follow the instructions below depending on what cheat it is you want to achieve. This stage must be performed regardless of the cheat you want to use.

Warning: Memory values reset after a map change, so if you wish to use these cheats, you’ll need to complete it before you move to another map, if you move to another map, start over.

Unlimited Bullets In Clip (No Reload):

This cheat will essentially give you a clip that contains unlimited ammunition (you’ll be able to fire an infinite number of shots without reloading or running out of ammunition). For starters you’ll need to know how much ammunition the clip of the gun you want to use the cheat on holds. You can find out on our list of weapons. Switch to the weapon you wish to use the cheat on, and ensure it has a full clip (for this example we will use the Taurus Revolver which has a 5 bullet clip). Alt+tab out of the game to cheat engine.

Enter the number of bullets in the clip into the search box, and press search, keep Cheat Engine’s values at their defaults (scan type as exact value, value type 4 bytes)

Now go back into the game and fire a shot, then pause the game and alt+tab to cheat engine. Now subtract 1 from the value in the search box and press «next scan»

Alt+tab back into the game, fire another shot, then repeat the above process again. Keep firing shots, and search subtracting 1 from the previous value. Carry on until there only 3 numbers left in the address window. Right click on the uppermost of the 3 remaining numbers

Select «change value of selected address» and set it to «999». The remaining addresses should now show 999, 999, and 25

Now, when you go back into the game, the magazine of the gun you’re using will appear to be empty, however it can still be fired. If so, congratulations, you performed the cheat properly.

Warning: if you reload the gun, it will reset itself and you’ll no longer have an infinite clip. Don’t reload the gun if you want the effect to remain.

Unlimited Bullets / Syringes:

The procedure is similar to the procedure above. If you want the challenge of reloading to remain, but want to give yourself unlimited ammunition (similar to the Famas), equip the weapon you want to achieve the effect on and note how many clips you currently have for it (if you’re looking to do it with syringes, equip the syringe and note how many you’re carrying).

Note: This cheat will not work on weapons that require clips, it will only work on weapons that use bullets, such as the Revolver and Shotgun.

Open cheat engine as detailed above. For this example the cheat will be performed with syringes.

Warning: This cheat will make it practically impossible to clear the slot that the syringes occupy in your inventory, so be sure to use your inventory wisely.

Search for the opening value in cheat engine

Now pick up another, or use one either by reloading, or injecting if it’s a syringe (warning: don’t use your last syringe). Then alt+tab out of the game and enter the new amount in the search box, and press next scan. Go back to the game and pick up or use another. As above, keep repeating this process until you’re left with 5 numbers. Go through them 1 by 1, and right click on them and change them to «999». Eventually, when you change one, all the rest of addresses will change to 999. When this happens, the cheat will have worked properly.

Now go back to the game. You will now see that you have 999 syringes / clips available (if this later changes to 254, don’t worry).

Using Doors Through Walls

Due to a known design feature of the goldsource engine upon which Cry Of Fear is built, in some places it is possible to use various items such as tape recorders and doors through walls. This will allow the player to skip some areas entirely, and speed up progress through the game.

Apartments: there are 4 occasions on which this trick can be used in the apartments. The first is when you climb the scaffolding to access the apartments. It is possible to use the door to enter floor 3 without climbing up the ladders. instead of using the ladder, jump across to the window box, and you can use the entrance through the ceiling. The second is when Simon first arrives on the second floor, and needs to obtain the hall door key to head towards the first floor elevator. It is possible to use the third floor door through the ceiling and bypass both the scene where Simon is locked in the room with the photos of the predator’s victims, and the sequence in which the Glock 19 and hall key are retrieved from the corpse. WARNING: as this bypasses the scene with the corpse, it will also prevent the player from acquiring the Glock, so it’s only recommended to do this if you have access to unlock weapons.

The other places this can be used are in the basement. Upon coming out of the basement after retrieving the tape with the elevator code (when you return to the flats it can also be used after acquiring the ladder from the now flooded basement), upon going up the stairs and leaving the basement, instead of using the door to floor 1, it is in fact possible through going up the first 3 stairs to use the door to floor 2 through the ceiling, cutting a significant chunk out of the travel.

Waspet Gardens: After you have dug up and acquired the key to the apartments and entered them, when you come face to face with the apartment on the first floor, it is possible to jump up and use the door to the apartment that grants access to the roof through the ceiling.

Skipping Syringe Animations

If the player stands next to a door, uses a syringe, then immediately walks through the door, the player will be healed without them having to watch the usual animation, which will save several seconds in time.

Mace Battle: Jumping To Avoid Shock

During the battle with mace, it is actually possible to avoid being damaged by the electric shocks without heading towards the platform. If you stay standing in the water, you’ll hear the electricity charging, and if you jump just as it’s about to discharge you will avoid taking damage as long as you time the jump properly.

Disabling Black & White Permanently

Unfortunately it isn’t possible to fully disable this setting in game, as for some reason the game changes it back again the next time you launch the application. However through a mod to a configuration file, it is possible to disable black and white mode permanently.

1: Navigate to your Steam folder (if you’re unsure how to find it, right click your Steam icon, select properties, and go to the «shortcut» tab, and click «open file location»)

2: Navigate to «SteamAppscommonCry Of Fearcryoffear», and open «autoexec.cfg». You be presented with a dialogue asking you what application you wish to open the file with. Select notepad from the list and press OK.

3: Add the following into a new line: gl_posteffects «0»

4: Close and save the file. From now on, whenever you launch the game black and white effect will be disabled in cutscenes and nightmare sequences

Changing Field Of Vision

Team Psykskallar have removed the usual command to change the field of vision in the game, however it is still possible to change it through a console command. Simply bring down the console using the «¬» key, and enter cl_fovmultiplier x (x being the number you want to enter. 1 is the default, 1.1 or 1.2 work best on most widescreen monitors).

WARNING: Setting this value too high will distort the game visually

Switching Weapons With Mouse Wheel

Under normal circumstances it’s impossible within the game to switch weapons using the mouse wheel, a feature the developers removed to force players to use quickslots, however it is still possible to do with third party software.

1: Download and install X Mouse Button Control from here

2: Add a profile for Cry Of Fear. Simply press add, use the option to browse for the EXE, navigate to «/steam/SteamApps/Cry Of Fear» and add cof.exe

3: Select cof.exe from the list, and under «Wheel Up» select «Simulated Keys» from the drop down menu. Enter «1» and press OK

4: Now do the same for «Wheel Down», and assign it to either number 2 or 3.

5: When you’re in game, assign the 2 weapons you use most frequently to the quickslot numbers you mapped out in steps 3 and 4. You should now be able to switch between them using the mouse wheel.

High Process Priority & Performance Tweaks

It has been reported by some users on the Cry of Fear forums that forcing the game into high priority mode resolves various issues with lag that some players experience. Depending on your graphics card maker, there are several ways this can be accomplished.

General: With Windows Task Manager (AMD, Intel & nVidia)

1: Once you have launched the game and the main menu is loaded, press the windows key on your keyboard to minimise the game.

2: Right click an empty area of the task bar and select «Task Manager».

3: If you’re using Windows 8, 8.1, or 10 select the «Details» tab. If you’re using Windows XP, Vista, or 7, select the «Processes» tab of task manager.

4: Locate «cof.exe» on the processes list. Right click it, select «set priority» and select high

5: Go back to the game

NOTE: You will have to do this every time you launch the game.

RadeonPro (AMD users only)

RadeonPro is a piece of software for users of AMD graphics cards, allowing them to use automated profiles for games.

1: Download and install RadeonPro from here

2: Add a profile for Cry Of Fear by clicking the new profile icon (shown below). Navigate to your Cry of Fear folder and add cof.exe

3: Cry Of Fear will appear on the list as «Half Life Launcher». Highlight the entry with your mouse, and select the «Tweaks» tab. Scroll down to «Misc Tweaks» and tick «Force Process High Priority».

4: Additionally, it’s recommended to have RadeonPro run on system startup so it can properly automate game settings so, additionally, go into the program’s settings (cog icon on the bar) and under general tick «Start With Windows» and «Start Minimised» (if you don’t want an annoying message box every time you boot, it’s also recommended to tick «Disable 64 bit support».

5: Although this step is optional, it may further boost performance to always force your GPU to operate at its full clock speed, to prevent the clock speed from fluctuating during gameplay and reducing potential lag. To do this, access the «Overdrive» tab (you’ll need to click the padlock icon to unlock overdrive mode). Tick «Enable Graphics Overdrive» and «Always Use Highest Performance Clocks While Gaming». Then scroll to the bottom and apply changes.

If any users are familiar with software similar to RadeonPro that would also work with nVidia cards, feel free to add instructions to this section

Although, when the team released Cry Of Fear on Steam as a standalone they took most of the game’s cheats out, it is still possible to alter some of the game’s client variables to cheat in various ways.

Warning: Team Psykskallar did not intend for cheats to be used in Cry of Fear, and you may be denied support if you choose to use cheats

Firstly, you’ll need to add a couple of things to your autoexec file. So locate and edit your autoexec.cfg file (as directed above, in the Disabling Black And White section), and add the following variables (each on a separate line):

sv_cheats 1

sv_maxspeed 999

Movement Speed:

This will allow you to alter the character’s forward movement speed in game (works for walking forwards, sprinting, and swimming). This process will involve binding commands to keys, so make sure that the keys you want to use aren’t already in use for other commands.

Bring down the console with «¬» or «~» and enter the following commands (replace X and Y with whatever keys you want to use)

bind x «cl_forwardspeed 999»

bind y «cl_forwardspeed 300»

If you enter the commands correctly, pressing X will speed up the character’s forward movement by around 333% (3.3x as fast), allowing you to cover large distances quickly, and pressing Y will return movement speed to normal. This will allow you to progress through the game and cover large areas more quickly. Particularly useful for swimming sections and backtracking sections

Gravity:

Altering gravity has many advantages, it will allow you to bypass some obstacles, jump over monsters, and skip ladder sequences. I would recommend having 3 keys. One for a negative gravity setting, one for a lower gravity setting, and one to return to normal (100 and -100 work well. 800 is normal). As above, replace X, Y, and Z with whatever keys you choose to use.

Bring down the console with «¬» or «~» and enter the following commands:

bind x «sv_gravity 800»

bind y «sv_gravity -100»

bind z «sv_gravity 100»

Pressing Y will be particularly useful for skipping extra long ladders, and pressing Z will be useful for shorter ladders, and obstacles. Once you’ve dodged your obstacle x will return the gravity level to normal

Brightness:

Changing the in game brightness will make it easier to navigate some darker areas, and although this setting can be changed from inside the game’s menu, you can also assign key commands to change this setting on the fly without entering the game’s menu, which will save a lot of time. As above replace X and Y with whatever keys you wish to use

Bring down the console with «¬» or «~» and enter the following commands:

bind x «gl_brightness 0.300000»

bind y «gl_brightness 0.000000» thank

Pressing X will increase the game’s brightness boost to the highest available value, and pressing Y will return it to normal.

Additional Information

This page will stay open for editing (at admin discretion), if the wiki’s readers find any more useful tips or tricks, they are welcome to add them to the article.