Disk error or network error - Исправление ошибок и поиск оптимальных решений проблем

Symptoms

«Runtime error 3043: Disk or Network error.»

This error may occur when launching FRx Designer, building an index, or generating a report.

Cause

This error may be caused by one or more of the following:

Invalid work drive path, import/export path, or output path.
Insufficient permissions to a network directory or resource.
A network resource that is unavailable.

Resolution

If you are not able to open FRx Designer

Click Start, and then click Run. Type frx.ini, and then click OK.
Look for the LastCompany= line. If this line contains a value after the equals sign, remove the text after the equals sign on that line only, and then save the file and close it.
Launch FRx Designer — if the company selection window is displayed before an error is received, skip to the «Locating the Necessary Paths within FRx» section of this article. Otherwise, continue to step 4.
Open the frx.ini file again. Look for the WorkDrive= line, and then make note of the path listed after the equals sign — this is the work drive path.
Skip to the «Steps for Resolution» section of this article.

Locating the Necessary Paths within FRx

If you are prompted to select a company, click Cancel.
On the Admin menu, click Processing Options.
Make note of the path listed in the Optional Work Drive box — this is the work drive path. Click Cancel to close the Processing Options window.
On the Company menu, click Information.
Make note of the path listed in theImport/Export Path box — this is the import/export path. Click Close to close the Company Information window.
If the error occurs while generating a report, open the catalog for the problematic report.
Click on the Output tab. If a full path is listed in the File Name box, make note of it — this is the output path. If only a file name is listed, the output path and the import/export path are the same. Close the catalog.

Steps for Resolution

If one or more of the paths obtained above are located on a network server, verify that the server is up and running without errors.
If one or more of the paths obtained above are located on a network server, verify that the server is accessible from the computer receiving the error.
Verify that the work drive path is valid and correct. If it is not, update the path. This path may be updated from the Processing Options window or by modifying the frx.ini file (see the «Locating the Necessary Paths within FRx» section above for the location of these paths).
Verify that the import/export and output paths are valid and correct. If one or more of these paths are invalid or incorrect, update them accordingly (see the «Locating the Necessary Paths within FRx» section above for the location of these paths).
Repeat the task that caused the error previously. If the error no longer occurs, skip all remaining steps; otherwise, continue with step 6.
Login to the problematic computer with an account that has administrative rights on the domain.
Repeat the task that previously caused the error. If the error no longer occurs, continue with step 8; otherwise, skip to step 9.
Log out of the machine, then log back in as the user. If the error still occurs, the user has insufficient permissions for one or more of the noted paths. Check the permissions for each directory, and grant permissions where necessary. Users must have Read, Read & Execute, Write, and Modify permissions for each of the paths noted above. After the necessary permissions have been granted, the user should no longer receive the error.
If the error persists, the server may need to be restarted. Restart the server as soon as possible.

References

Need more help?

Источник

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

28.12.2006, 04:34. Показов 2221. Ответов 9

Я поставил себе новый винч, поставил на него систему (Win2000), VB. Переписал VB-проект со всеми формами. Логический диск поменялся с E на D. После этого любое обращение к любым свойствам или методам объектов типа Form вызывает ошибку “Disk or network error”, и после этого соотв. строчка кода выполняется. Как объясняется эта ошибка, и как её устранить? Заранее спасибо.

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь

0 / 2 / 3

Регистрация: 27.03.2012

31.12.2006, 00:20

Попробуй посмотреть любым текстовым редактором файлы своего проекта, например, в *.vbp есть раздел ‘Reference’, где указывается относительный путь к файлам библиотек. Может в этом проблема — диски-то ты поменял, а путь ссылается на библиотеку на старом диске.

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

31.12.2006, 00:40

[ТС]

Да что-то не вижу там ничего такого… В vbp-файле:

Type=Exe
Reference=*G{00020430-0000-0000-C000-000000000046}#2.0#0#……WINNTSystem32stdole2.tlb #OLE Automation
Object={202D3AE0-2F0E-11D1-A1F6-0080C88593A5}#1.0#0; dfrgui.dll
Object={683364A1-B37D-11D1-ADC5-006008A5848C}#1.0#0; dhtmled.ocx
Object={410381CD-AF42-11D1-8F10-00C04FC2C17B}#1.0#0; comsnap.dll
Object={4E3D9D11-0C63-11D1-8BFB-0060081841DE}#1.0#0; Xlisten.dll
Object={EAB22AC0-30C1-11CF-A7EB-0000C05BAE0B}#1.1#0; SHDOCVW.DLL
Object={3050F1C5-98B5-11CF-BB82-00AA00BDCE0B}#4.0#0; mshtml.tlb
Object={05589FA0-C356-11CE-BF01-00AA0055595A}#2.0#0; amcompat.tlb
Object={06DD38D0-D187-11CF-A80D-00C04FD74AD8}#1.0#0; plugin.ocx
Object={F5BE8BC2-7DE6-11D0-91FE-00C04FD701A5}#2.0#0; agentctl.dll
Object={EEE78583-FE22-11D0-8BEF-0060081841DE}#1.0#0; XVoice.dll
Object={0E59F1D2-1FBE-11D0-8FF2-00A0D10038BC}#1.0#0; msscript.ocx
Object={2179C5D0-EBFF-11CF-B6FD-00AA00B4E220}#1.0#0; nscompat.tlb
Object={84D50DE0-C867-11CF-B1AE-00AA00A3F2C3}#1.0#0; FLUPL.OCX
Reference=*G{00025E01-0000-0000-C000-000000000046}#4.0#0#….Common FilesMicrosoft SharedDAODAO350.DLL#Microsoft DAO 3.51 Object Library
Reference=*G{00000200-0000-0010-8000-00AA006D2EA4}#2.0#0#….Common Filessystemadomsado20.tlb#Microsoft ActiveX Data Objects 2.0 Library
Reference=*G{00020813-0000-0000-C000-000000000046}#1.3#0#….Microsoft Office2000OfficeEXCEL9.OLB#Microsoft Excel 9.0 Object Library
Object={00028C01-0000-0000-0000-000000000046}#1.0#0; DBGRID32.OCX
Object={FAEEE763-117E-101B-8933-08002B2F4F5A}#1.1#0; DBLIST32.OCX
Object={0ECD9B60-23AA-11D0-B351-00A0C9055D8E}#6.0#0; MSHFLXGD.OCX
Object={5C8CED40-8909-11D0-9483-00A0C91110ED}#1.0#0; MSDATREP.OCX
Object={CDE57A40-8B86-11D0-B3C6-00A0C90AEA82}#1.0#0; MSDATGRD.OCX
Object={F0D2F211-CCB0-11D0-A316-00AA00688B10}#1.0#0; MSDATLST.OCX
Object={139DD5D1-D6E2-11D0-89D4-00A0C90833E6}#1.0#0; daxctle.ocx
Object={65E121D4-0C60-11D2-A9FC-0000F8754DA1}#2.0#0; MSCHRT20.OCX
Object={5E9E78A0-531B-11CF-91F6-C2863C385E30}#1.0#0; MSFLXGRD.OCX
Object={648A5603-2C6E-101B-82B6-000000000014}#1.1#0; MSCOMM32.OCX
Object={67397AA1-7FB1-11D0-B148-00A0C922E820}#6.0#0; MSADODC.OCX
Object={8E27C92E-1264-101C-8A2F-040224009C02}#7.0#0; MSCAL.OCX
Object={F9043C88-F6F2-101A-A3C9-08002B2F49FB}#1.2#0; COMDLG32.OCX
Object={3B7C8863-D78F-101B-B9B5-04021C009402}#1.2#0; RICHTX32.OCX
Object={6FBA474E-43AC-11CE-9A0E-00AA0062BB4C}#1.0#0; SYSINFO.OCX
Object={20C62CAE-15DA-101B-B9A8-444553540000}#1.1#0; MSMAPI32.OCX
Object={27395F88-0C0C-101B-A3C9-08002B2F49FB}#1.1#0; PICCLP32.OCX
Object={F6125AB1-8AB1-11CE-A77F-08002B2F4E98}#2.0#0; MSRDC20.OCX
Object={48E59290-9880-11CF-9754-00AA00C00908}#1.0#0; MSINET.OCX
Object={C1A8AF28-1257-101B-8FB0-0020AF039CA3}#1.1#0; MCI32.OCX
Object={C932BA88-4374-101B-A56C-00AA003668DC}#1.1#0; MSMASK32.OCX
Object={BDC217C8-ED16-11CD-956C-0000C04E4C0A}#1.1#0; TABCTL32.OCX
Object={FE0065C0-1B7B-11CF-9D53-00AA003C9CB6}#1.1#0; COMCT232.OCX
Object={6B7E6392-850A-101B-AFC0-4210102A8DA7}#1.3#0; COMCTL32.OCX
Object={831FDD16-0C5C-11D2-A9FC-0000F8754DA1}#2.0#0; MSCOMCTL.OCX
Object={38911DA0-E448-11D0-84A3-00DD01104159}#1.1#0; COMCT332.OCX
Form=Form1.frm
Form=AddNewPlant.frm
Form=AddNewSection.frm
Form=AddNewTank.frm
Form=AddNewFamily.frm
Form=EditNameOfPlant.frm
Form=EditNameOfSection.frm
Form=EditNameOfTank.frm
Form=EditFamily.frm
Form=frmAbout.frm
Form=SplitFamily.frm
Form=TotalPlantInformation.frm
Form=TotalSectionInformation.frm
Form=TotalTankInformation.frm
Form=TotalFamilyInformation.frm

и т.д.

0 / 2 / 3

Регистрация: 27.03.2012

31.12.2006, 00:41

А это что?

Reference=*G{00020430-0000-0000-C000-000000000046}#2.0#0#……WINNTSystem32stdole2.tlb #OLE Automation

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

31.12.2006, 00:59

[ТС]

Я не уверен, но G у меня там вообще был CD»шник, кажись… Система стояла на E, причём не в WINNT, а в WIN2000. Сейчас — на D:WINNT.

Нет, CD»шник — F, а G — это я Mobile Rack подключал… Что-то другое это ‘G’ означает, видимо…

0 / 2 / 3

Регистрация: 27.03.2012

31.12.2006, 01:08

Да нет, я имел ввиду другое — это не G, читай между решетками — ……WINNTSystem32stdole2.tlb

Есть у тебя сейчас такое? Как я понимаю, нет, потому что во-первых, это путь относительный — т.е. твой проект и система раньше были на одном диске, а сейчас как? Во-вторых, не WINNT, а WIN2000 и т.д. Т.е. я имею ввиду, что проблема может быть в пути к этой библиотеке, который указан неверно, в соответствии с твоей новой конфигурацией. Наверно, его можно указать полностью как диск:папкафайл

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

31.12.2006, 01:30

[ТС]

Да нет, лежит — D:WINNTSystem32…tlb.

Вообще, я переставил на новую систему на D Win2000 VB, затем тупо переписал все файлы проекта (vbp, frm»ы и ещё какие-то, frx»ы, кажись) в D:Program FilesMicrosoft Visual StudioVB98, т.е. куда он по умолчанию проекты записывает.

По идее, тут какая-то лажа не с OLE Automation, а в ссылках именно на формы, или на объекты типа ‘Form’. Вот только как это проверить, я не догоняю.

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

01.01.2007, 01:54

[ТС]

Отбой, разобрался. Довольно интересно.

0 / 2 / 3

Регистрация: 27.03.2012

01.01.2007, 02:00

Ну и что же было?

0 / 0 / 0

Регистрация: 18.09.2006

Сообщений: 40

01.01.2007, 03:02

[ТС]

Там в объектах Data остались старые пути в DatabaseName на E. Оказывается, VB сначала пытался как-то инициализировать эти компоненты, а путь неверный, и выдавал ошибку диска. И только после этого он выполнял обработчик события Activate для соответствующей формы, в котором DatabaseName изменялся на корректный, и делался Data.Refresh. Видимо, такой глюк может быть и в аналогичных случаях, если в свойстве компоненты (не Data) указаны какие-то пути к файлу (если такие компоненты вообще есть).

Источник

Remove From My Forums

Общие обсуждения
Hi

I added a Win 2008 R2 Foundation server to our existing domain. Planning to use it as the DC. After a while, the users start getting error messages «Disk or Network Error» and some problems with Outlook. I shut down the Foundation server and all returns
to normal. Anybody has this issue? Help and advice much appreciated.

Many thanks in advance

Richard

i started it up again today but there were no issues…
- Изменен тип
  Tiger LiMicrosoft employee
  5 мая 2011 г. 1:16

Все ответы

Hi,

To determine and verified what actually happen you can try executing the below commands.

1) chkdsk = To verified if hard disk is having problems.

2) netstat -s -r -5 check if there is any packet missing or unreachable.

3) pathping from client machine to exchange server.

4) ping -t at gateway to determine NIC card is ok.. no packet drops or intermittent connectivity.

5) start run > eventvwr > systems > try to locate perf or disk error.

Usually such error when it prompted. It is likely to be a network issue.

Hope it helps Good Day

Guowen Su | CCNA, CCIP, MCP, MCSA, MCSE, MCTS, MCITP, CEH | http://www.microsoft.com/en/sg/default.aspx Our Goal? VERY SATISFIED Customers. If you’re not…let’s talk!!
Thanks for taking to help

should i chkdsk or the rest on the server? 2 client machines has the error message.

Richard
Hi Richard,

Thanks for posting here.

Could you please discuss these error messages «Disk or Network Error» in detail ? error ID or description form even log is preferred.

Meanwhile, what about the network settings (IP address segment , default gateway, DNS server…etc.) you set for client computers ? have you modified any these
setting since join this Windows server 2008 R2 foundation host into domain and prompt it as a domain controller of exist active directory system?

Thanks.

Tiger Li

Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Источник

Remove From My Forums

Question
User-1264639258 posted

We recently upgraded to Windows Server 2003 and IIS 6. And we have one web application that works fine except for a certain feature within it. It gives «Disk or network error» when you click on a button that opens a popup form window and «Network path not
found» when you click on a link that opens a document containing info you entered in the form.

Here’s what I’ve tried so far:
-Checked that the documents exist
-Ran in IIS 5 mode
-Checked temp folders
-Ran disk check for errors
-Deleted and readded the virtual directory within IIS
-Compacted and repaired the database…..there actually were a few errors in one of the tables and this did fix those errors, but didn’t solve the problem
-Installed a hotfix from Microsoft dealing with Access 2.0

The server can access the Internet, and I can access shared files stored on the server from my computer. Does anyone have any other ideas I could try? I’m desperate, as a client of ours is going to be needing access to this information soon.

Источник

We have a Windows 2008 running terminal services, but as remote apps, not full desktops.

There is a single database file, calc.mdb, that gives «Disk or Network Error». If it is accessed by a user with MS Access 2003 installed, it runs just fine. However for our traveling users that access via the RemoteApp, then they get «Disk or Network Error».

I have searched and just about everyone comes to a couple of conclusions:

1. It’s a network error.
2. Recompile and/or compact it.

It is certainly not #1 because I can verify that the network is fine.
I have recompiled and compacted with no success (and besides you can open the database).

From a client computer:

A) Has no issue running another RemoteApp (such as Word, WordPad, or even another Access DB)
B) Has no issue logging in via full remote desktop.
C) Can run the database from Access 2003 locally installed
D) Receives «Disk or Network Error» when opening via Remote-App.

The event log shows nothing of any help that I could find. With all the various logs in Windows Server now, maybe somewhere else to look? It certainly seems related to the RemoteApp setup.

Again, this is NOT A NETWORK ISSUE! This has been going on for months. I have verified it is not a network issue.

And yes, as soon as I complete my current project, the next is to update these aging apps.

EDIT:
Additional Test based on comment:

Copied offending DB to local computer.
Renamed to add TEST1 to file name.
Copied back to server.
Updated RemoteApp shortcut to look at new file name.
It works!

So simply copying the file and renaming makes it work. However, I tried the same steps without changing the name (basically copy it to local and copy/overwrite right back to server) and that does not fix the issue.

Источник

VBForums
.NET and More
ASP.NET And ASP.NET Core
[RESOLVED] Disk or Network Error with CORRECT connection string

Feb 11th, 2010, 02:35 AM

Thread Starter

Fanatic Member

[RESOLVED] Disk or Network Error with CORRECT connection string

So, entire situation.

[ASP.NET] code (Shown below) running on an [IIS server]
[Microsoft Access Database] sitting out on the company network folder

I’ve gotten 1 of 2 seperate errors.

Disk or Network Error
2. The Microsoft Jet database engine cannot open the file ‘\————test.mdb’.
It is already opened exclusively by another user, or you need permission to view its data.

For the first error, I made sure that IUSR, IWAM, and ASPNET have full access to the TMP and TEMP System Variable folders.

It depends on how I specify the path.

However, if I just type in gibberish in the path name, it gives the correct «invalid path» error below.

‘\abcdefgadsfehdsftest.mdb’ is not a valid path.
Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.

So this leads me to belive that
A) the path I am specifing is working
B) the connection string is written correctly
C) no one is accessing the file, I created it myself just to test this and no one would randomly go to this folder location and open it.

What am I missing? Are there settings in IIS that I need to adjust on the ASP.NET IIS server machine?

VB.NET Code:

<%@Page Language="vb" Explicit="True" Debug="True"%>




  


                       
  



<%@Import Namespace="System.Data"%>
<%@Import Namespace="System.Data.OleDb"%>
<script Runat="Server">
  Sub Page_Load(sender As Object, E as EventArgs)
    If Page.IsPostBack Then
       InsertRecord()
    End If
  End Sub
  Sub InsertRecord()
    Dim conClasf As OleDbConnection




  


                       
  



    Dim cmdClasf As New OleDbCommand
    Dim strClasf As String
    Dim strSQL as String
    lblSubmitMsg.Text=""
    strClasf = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
               "Data Source='\------------test.mdb';"
    conClasf = New OleDbConnection(strClasf)
    conClasf.open
    strSQL = "INSERT INTO testtable (" & _
           "MyUser, " & _




  


                       
  



           "MyPass, " & _
           "LogDate " & _
           ") " & _
           "Values ('" & txtUsername.Value & _
                "', '" & txtPassword.Value & _
                "', #" & Now() & "#);"
    cmdClasf = New OleDbCommand(strSQL, conClasf)
    Try
      cmdClasf.ExecuteNonQuery()




  


                       
  



      lblSubmitMsg.Text="Successfully Saved Username and Password"




  


                       
  



    Catch Ex As Exception
      lblSubmitMsg.Text=Ex.Message
    End Try
    conClasf.Close
  End Sub
</script>
<html>
<head>
<Title>Insert a record into the test table</Title>
</head>
<body>
<h1>Insert a record into the test table</h1>
<form method="POST" runat="server">
<table border="0" cellpadding="2" cellspacing="0">
  <tr>
    <td>Username</td>
    <td><input type="Text" id="txtUsername" size="20" Runat="server"/></td>
  </tr>
  <tr>
    <td>Password</td>
    <td><input type="Text" id="txtpassword" size="20" Runat="server"/></td>
  </tr>
  <tr>
    <td></td>
    <td><input type="submit" value="Button Text" id="btnSub" size="20" Runat="server"/></td>
  </tr>
</table>
</form>
<p><asp:label id="lblSubmitMsg" runat="server" /></p>
</body>
</html>

Last edited by rack; Feb 17th, 2010 at 07:51 PM.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood

Feb 11th, 2010, 02:49 AM

#2

Re: Disk or Network Error with CORRECT connection string

Hey,

As a sanity check, can you move the file onto the web server, so that it has a local file path, i.e. C:temp?

I suspect this has something to do with the fact that you are accessing the database over a UNC path.

Gary
Feb 11th, 2010, 02:56 AM

#3
Re: Disk or Network Error with CORRECT connection string
I doubt you are telling in code that

Code:

Data Source='\------------test.mdb';

to look behind the 4 folder. Do you have that folders ?
Please mark you thread resolved using the Thread Tools as shown
Feb 11th, 2010, 02:57 AM

#4

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

It works fine locally. I actually started out with it in the same folder, and moved it to the network location and changed the connection string to the above.

How would I specify the path so that there are no issues with the connection guessing what I mean?

if path was

\floridaemployees1 on 1backendtest.mdb

and if \floridaemployees really is just a folder on \Jersey as \JerseyEmployees_Florida

When I specify \FloridaEmployees1 on 1backendtest.mdb I get the Disk or Network error
When I specify \JerseyEmployees_Florida1 on 1backendtest.mdb I get the 2nd error.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 02:59 AM

#5

Re: Disk or Network Error with CORRECT connection string

Cover the path with [\floridaemployees1 on 1backendtest.mdb] and try

Please mark you thread resolved using the Thread Tools as shown
Feb 11th, 2010, 03:03 AM

#6

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Originally Posted by danasegarane

Cover the path with [\floridaemployees1 on 1backendtest.mdb] and try

If I surround the path with [ and ] I get an error that says

‘C:WINDOWSsystem32[floridaemployees1 on 1BackEndtest.mdb]’ is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.

it removes the 2nd slash infront of florida, and it adds C:Windowssystem32 for some reason?

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:03 AM

#7

Re: Disk or Network Error with CORRECT connection string

Hey,

Have you made sure that the identity of the application pool that is running your site, i.e. under IIS, has access to that share?

Gary
Feb 11th, 2010, 03:05 AM

#8

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Originally Posted by gep13

Hey,

Have you made sure that the identity of the application pool that is running your site, i.e. under IIS, has access to that share?

Gary

Not sure exactly what you mean.

The user that is logged into the IIS server, lets say the Username is IISTEST1, was added to the network folder location with read, write, modify permissions.

The wording [identity of the application pool] I don’t understand.

I can browse to the file location, create files, delete files, etc.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:07 AM

#9

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

I just tried mapping a path to the network folder and then using that drive name.

Didn’t work, I got

‘Z:test.mdb’ is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:10 AM

#10

Re: Disk or Network Error with CORRECT connection string

Hey,

When IIS hosts a web application, it doesn’t use the currently logged in user or anything like that, it uses an identity (a user on the machine) to do this.

This is configurable within the Internet Information Services Manager.

Have a look here for more information:

http://www.microsoft.com/technet/pro….mspx?mfr=true

Gary
Feb 11th, 2010, 03:16 AM

#11

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

And this Identity is different from the ComputerNameIUSR_ComputerName, ComputerNameIWAM_ComputerName, and ComputerNameASPNET ?

(Reading the link you posted now)

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:18 AM

#12

Re: Disk or Network Error with CORRECT connection string

Depending on how your IIS is configured, yes, it can be.

Gary
Feb 11th, 2010, 03:19 AM

#13

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Originally Posted by gep13

Hey,

When IIS hosts a web application, it doesn’t use the currently logged in user or anything like that, it uses an identity (a user on the machine) to do this.

This is configurable within the Internet Information Services Manager.

Have a look here for more information:

http://www.microsoft.com/technet/pro….mspx?mfr=true

Gary

There is no Application Pool under the Local Computer in IIS5.0 and 5.1 that I see here.

This link says Application Pool does not exist on 5.1
http://msdn.microsoft.com/en-us/library/ms525832.aspx

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:20 AM

#14

Re: Disk or Network Error with CORRECT connection string

Hey,

Ah, ok, you are using IIS on Windows XP, I thought you meant that you were running IIS 6, i.e. on Windows Server.

Gary
Feb 11th, 2010, 03:22 AM

#15

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Originally Posted by gep13

Hey,

Ah, ok, you are using IIS on Windows XP, I thought you meant that you were running IIS 6, i.e. on Windows Server.

Gary

I wish, I’m not in the IT deparmtent, so I only get throw back servers ;p

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:25 AM

#16

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Someone said to try putting this in the web.config file?

<identity impersonate=»true» username=»user» password=»password» />

on a link I found.

However, I did not want to do this, without knowing the security ramifications.

What possible security holes does this open up? (On an internal Intranet)

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:41 AM

#17

Re: Disk or Network Error with CORRECT connection string

Hey,

Basically, this just allows the ASP.Net Worker Process to assume the identity that you provide in the configuration file. i.e. if you give it your credentials, it will be your identity that makes the request for the database. I would give this a try, it is a good test. If it works, then you know exactly what the problem is.

Gary
Feb 11th, 2010, 03:04 PM

#18
Thread Starter

Fanatic Member
Re: Disk or Network Error with CORRECT connection string
Alright,

Doing the Impersonate using the following line works.

Code:

<identity impersonate="true" userName="user" password="password" />

However Apparently username is case sensitive to userName.

So what does this mean, do I have to use this impersonate method? If so, can I do this in code so the login from the user is passed instead of the login on the IIS machine?

Info for future people who might read this post:

userName is case sensitive

web.config is a simple ascii text file with file extention .config

Place this file in the same folder as the ASPX page, or higher up in the chain. Be carefull in placing this file too high or it will allow impersonation for ALL access to the web server.

If the account is an Active Directory type Domain account, you will need to include the domain name in the username (Example: exampleblah) Where Example is the domain name, and blah is the username

The contents of the config file should look as such:

Code:

<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <identity impersonate="true" userName="user" password="pass" /> </system.web> </configuration>
Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 11th, 2010, 03:23 PM

#19

Re: Disk or Network Error with CORRECT connection string

Hey,

No, you don’t have to impersonate a user. You have to give the identity running your ASP.Net application the correct priveleges to access the file.

You have just proved that running the site as you, who obviously have more permissions that the default account, that it works. This highlights that it is definitely a permissions problem.

Gary
Feb 11th, 2010, 03:44 PM

#20

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

The network folks said they can’t add the local IUSR account to the network folder in Active Domain?

How would I give permissions to the Identity?

Do you have any links on this subject?

EDIT:

The folder out on the network I had locked down.
Only specific users can access it.
Of those specific users, only a hand full have write access to actualy use the access database.
The EVERYONE option has been set to list folder contents only.

Last edited by rack; Feb 11th, 2010 at 03:55 PM.

Reason: Added details

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 12th, 2010, 03:25 AM

#21

Re: Disk or Network Error with CORRECT connection string
Feb 12th, 2010, 04:13 AM

#22

Re: Disk or Network Error with CORRECT connection string

Originally Posted by rack

The network folks said they can’t add the local IUSR account to the network folder in Active Domain?

How would I give permissions to the Identity?

Do you have any links on this subject?

EDIT:

The folder out on the network I had locked down.
Only specific users can access it.
Of those specific users, only a hand full have write access to actualy use the access database.
The EVERYONE option has been set to list folder contents only.

Get them to create a low privilege user that does have write access to the MDB, and impersonate that user in your config file. The basic point is, if you don’t have permissions, you can’t write to it. You need someone who can write to it, and if they are tight on security, then you’ll want to have a conversation with them about getting you a username/pw to do this.
Feb 12th, 2010, 03:04 PM

#23
Thread Starter

Fanatic Member
Re: Disk or Network Error with CORRECT connection string
Alright, so from those two links, and what Mendak has said, it sounds like the way i’m doing this, is infact what I’m suppose to do. The only difference is that you are saying I should have a dedicated user created for this, vs using my own credentials, correct?

Currently This is infact the case, I am using a setup username/password specifically for the IIS Server login (not my own username/password). This login was given modify permissions to the backend folder on the network.

The only additional things I noticed in the links were:

Code:

<processModel enable="true"

Is (processModel) better to use than (Identity Impersonate=»True»)? Or is it just a different way to do it?

and then they have IUSR_ProcessUser.

If I had an account created with username sunshine, and company bluesky, would it be like so?

Code:

<system.web> <processModel enable="true" userName="blueskyIUSR_sunshine" password="blah"/> </system.web>

or like so

Code:

<?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <identity impersonate="true" userName="blueskysunshine" password="pass" /> </system.web> </configuration>
Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 13th, 2010, 10:04 AM

#24

Re: Disk or Network Error with CORRECT connection string

Hey,

That is typically what we do yes, we term it having a service account, and it has all the necessary permissions to access everything that it needs to, and nothing more. In the example of an ASP.Net Application, we would add a new Application Pool, and set the Identity of that Application Pool to run under this service account, then we would add our ASP.Net Application to run under this Application Pool.

Choosing to Impersonate this particular user is certainly another way to achieve this.

Gary
Feb 14th, 2010, 05:35 AM

#25

Re: Disk or Network Error with CORRECT connection string

When you use processModel, all threads that generate from that app are run under the impersonation that you specify. But if you use identity impersonate, then the main thread runs under the impersonation you specify, while the rest run as the ASPNET user. This can make a difference, so using processModel may bring about unnecessary complications.
Feb 16th, 2010, 09:17 PM

#26

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Thank you both, you provided very helpful, accurate, and usefull information.

Unforutnetly because of my lack of understanding I had a read around a bit more to fully understand.

From what you’ve said, and what I’ve read.

I am going to try unchecking «Anonymous Access» and use Integrated Windows Authentication (As we have no unix/mac/linux users that will be accessing this site internally). I will have to play with this, different browsers, VPN, etc, to make sure it works.

If that does not work, I will attempt to impersonate the account that was specifically set up for this server to have minimal access.

Here are some links to anyone in the future that might read this, they helped me understand.

This first link has a LOT of detail about the ASP.NET and IIS settings.
Egghead: http://www.eggheadcafe.com/community…ervice-se.aspx

Another Link:
Bytes.com: http://bytes.com/topic/asp-net/answe…-impersonation

Impersonate through Code:
Microsoft: http://support.microsoft.com/?id=306158

A bit of info about IIS, ISAPI, ASP.NET
dotnetslackers.com http://dotnetslackers.com/articles/i…cessModel.aspx

ASP.NET Authenticiation
Microsoft: http://msdn.microsoft.com/en-us/libr…47(VS.71).aspx

IIS Authenticiation
Microsoft: http://msdn.microsoft.com/en-us/libr…14(VS.71).aspx

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 17th, 2010, 02:58 AM

#27

Re: [RESOLVED] Disk or Network Error with CORRECT connection string

Hey,

Let us know how you get on.

Gary

Feb 17th, 2010, 07:50 PM

#28

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

I tried to do Windows Authentication, and turned all other authentication off.

If I access the site from the computer locally, it works. If however I access the computer remotely, it does not work.

It says: Unspecified Error (Highlighting the «conClasf.Open» statement).

Which to me says that for some reason it couldn’t connect to the database out on the network using my personal credentials, which is odd because I have full access to the folder.

The ASP labels correctly show the username I am using is the one that I am signed into windows as. But it gives that error still.

web.config file for the specific folder.

Code:

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
  <system.web>
    <authentication mode="Windows"/>
    <identity impersonate="true"/>
  </system.web>
</configuration>

vb Code:

<%@Page Language="vb" Explicit="True" Debug="True"%>
<%@Import Namespace="System.Data"%>
<%@Import Namespace="System.Data.oleDb"%>
<%@Import Namespace="System.Security"%>
<Script Runat="Server">
  Sub Page_Load(sender As Object, E as EventArgs)
    If Page.IsPostBack Then
      InsertRecord()
    End If
    'I added this per a windows documention to view
    'who was being impersonated
    Dim authUserName As String
    Dim aspUserName As String
    authUserName = User.Identity.Name
    aspUserName = Principal.WindowsIdentity.GetCurrent.Name
    authUserPrincipalLabel.Text = authUserName
    aspPrincipalLabel.Text = aspUserName
  End Sub
  Sub InsertRecord()
    Dim conClasf As OleDbConnection
    Dim cmdClasf As New OleDbCommand
    Dim strClasf As String
    Dim strSQL As String
    lblSubmitMsg.Text=""
    strClasf="Provider=Microsoft.Jet.OLEDB.4.0;" & _
             "Data Source='\floridaemployees1 on 1backendtest.mdb';"
    conClasf = New OleDbConnection(strClasf)
    conClasf.open
    strSQL = "INSERT INTO testtable (" & _
             "MyUser, " & _
             "MyPass, " & _
             "LogDate " & _
             ") " & _
             "Values ('" & txtUsername.value & _
                  "', '" & txtPassword.value & _
                  "', #" & Now() & "#);"
    cmdClasf = New OleDbCommand(strSQL, conClasf)
    Try
        cmdClasf.ExecuteNonQuery()
        lblSubmitMsg.Text="Successfully Saved Username and Password"
    Catch Ex As Exception
        lblSubmitMsg.Text=Ex.Message
    End Try
    conClasf.Close
  End Sub
</Script>
<html>
  <head>
    <title>Testing ASP.NET connection to 1on1 database</title>
  </head>
  <body>
    <h1>Testing ASP.NET connection to 1on1 database</h1>
    <form method="POST" runat="server">
      <table border="0" cellpadding="2" cellspacing="0">
        <tr>
          <td>Username</td>
          <Td><input type="Text" id="txtUserName" size="20" Runat="server"></td>
        </tr>
        <tr>
          <td>Password</td>
          <td><input type="Text" id="txtpassword" size="20" Runat="server"></td>
        </tr>
        <tr>
          <td></td>
         <Td><input type="submit" value="Button Text" id="btnSub" size="20" Runat="server"></td>
        </tr>
    <tr>
          <td>You Are</td>
          <td>This page runs as</td>
        </tr>
        <tr>
          <td><asp:label id="authUserPrincipalLabel" runat="server" /></td>
          <td><asp:label id="aspPrincipalLabel" runat="server" /></td>
        </tr>
      </table>
    </form>
    <p><asp:label id="lblSubmitMsg" runat="server" /></p>
  </body>
</html>

Last edited by rack; Feb 17th, 2010 at 07:53 PM.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood

Feb 17th, 2010, 09:56 PM

#29
Thread Starter

Fanatic Member
Re: Disk or Network Error with CORRECT connection string
Well reading around (a lot).

I believe I found that the issue seems to be this. I was focused on Impersonate, and the issue was, that Impersonate doesn’t work over a network, therefore I’d have to use Delegation.

Please let me know if I am understanding all this correctly or not.

There are 3 computers in question.

Client/Workstation

IIS Server (ASP.NET .aspx front end)

Network folder within the Intranet

From the information I have read, I am experiencing the «Double hop» issue. In that, when the Client at A.) opens the .aspx page on B.) the credientials passed through Integrated Windows Authentication only provide a secondary Token Password. So when B.) tries to get data from C.) it throws an error because C.) is looking for a Primary Token Password, to which B.) does not have.

to quote microsoft in this article:
http://msdn.microsoft.com/en-us/library/aa302385.aspx

Originally Posted by Microsoft

If you enable impersonation, the impersonated security context will not have network credentials (assuming delegation is not enabled and you are using Integrated Windows authentication). Therefore, the remote call to SQL Server will use a NULL session, which will result in a failed call. With impersonation disabled, the remote request will use the ASP.NET process identity.

I wonder if either of the following would work around this:

setting the processModel to use a SPECIFIC username/password always.

(Which obviously doesn’t provide as specific of security per logged in person)

I read somewhere that the username/password could even be stored encrypted instead of in plain text.

Impersonating the logged in Client on a specific call via Code inside the aspx file.

Double Hop Issue:
http://support.microsoft.com/default…b;en-us;329986

Information I’ve found so far on Delegation:
http://msdn.microsoft.com/en-us/library/ms998355.aspx
http://msdn.microsoft.com/en-us/library/ms998351.aspx
http://technet.microsoft.com/en-us/l…64(WS.10).aspx
http://www.vbforums.com/showthread.p…ght=delegation

Building Secure ASP.NET Applications: Authentication, Authorization, and Securty Communicaiton
http://msdn.microsoft.com/en-us/library/aa302415.aspx

ASP.NET Process Identity:
http://msdn.microsoft.com/en-us/libr…39(VS.71).aspx

Securiting ASP.NET with Windows Security:
http://support.microsoft.com/kb/315736/

Detailed ASP.NET Security Overview:
http://support.microsoft.com/kb/891028
Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 18th, 2010, 03:29 AM

#30

Re: Disk or Network Error with CORRECT connection string

Originally Posted by rack

If I access the site from the computer locally, it works. If however I access the computer remotely, it does not work.

When you say this, do you mean from another computer that is connected to the domain? Or from another computer that is not on the domain itself?

Gary
Feb 18th, 2010, 11:51 AM

#31
Thread Starter

Fanatic Member
Re: Disk or Network Error with CORRECT connection string
All computers A, B, and C, are on the domain.

When accessing from A (The client/workstation via Internet Explorer) it does not work.

When I access it from B (The IIS Server via Internet Explorer) it works.
Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 21st, 2010, 02:44 PM

#32

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Originally Posted by gep13

When you say this, do you mean from another computer that is connected to the domain? Or from another computer that is not on the domain itself?

Gary

Was what I responded with, what you needed to know ?

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 22nd, 2010, 03:49 AM

#33

Re: Disk or Network Error with CORRECT connection string

Hey,

Yeah, it was the answer that I was looking for clarification on, but it didn’t help with thinking of anything else to suggest

Will have to give this one some more thought.

Gary
Feb 22nd, 2010, 04:37 PM

#34

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Oh =) ok hehe.

Thank you for all the effort and time you’ve been putting into this also. You and Mendhak both.

So from your question, it makes it sound like your thinking the 2nd hop issue doesn’t apply? Meaning I shouldn’t need to have the admins allow the IIS computer to «Delegate» in Active Directory?

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 23rd, 2010, 03:11 AM

#35

Re: Disk or Network Error with CORRECT connection string

Hey,

To be honest, I am really not sure. This is an area that I have never had to play with, as I have never ran into this particular issue. Is there any way that you can start stripping the set up back to basics? i.e. start with a simple website, get that works in all cases, and then start adding the layers of complexity back onto it, that way you can find out exactly where it stops working.

Gary
Feb 23rd, 2010, 03:02 PM

#36

Re: Disk or Network Error with CORRECT connection string

The IIS server isn’t allow to negotiate authentication which is why the existing user’s credentials aren’t used when accessing Server3. So IIS (Server2) sends a request to Server3, Server3’s ACL on the resource kicks in and it challenges Server2. Server2 can’t do anything, it can only pass a token that it has full control over, which is one of its own. Yes, it’s known as the double hop issue.

And so for that reason, you need to impersonate with a low privilege user. Did you try the <impersonate> tag with a username and password to start with? Yes, you can encrypt the identity section of the web.config file and you can also impersonate a user via code.
Feb 24th, 2010, 03:05 PM

#37

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

Mendhak,

Using Impresonate with a username and password in the web.config file works. The issue was I was trying to pass the user who is accessing the website’s permissions instead. This was just an extra step to make sure they actually do have access to the database. (Because I manage who has access to the network folder)

I will contact my admins and ask if they can allow the IIS server to delegate.

Which is better in the long run? Delegation or manually creating coding restrictions on access to aspx content with security level settings in a table?

Gp13,

Everything works fine until the IIS server attempts to connect to a network source.

Decision?
I think I will probably just end up using the impersonate, and encrypting the username/password.

I sincerly appreciate all the information provided and help. I just want to analyze the options before starting.

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood
Feb 28th, 2010, 06:00 AM

#38

Re: Disk or Network Error with CORRECT connection string

I’d probably say that in your case, the intranet app, it would be so much better if you could get over the double hop issue and have user credentials passed on to the remote resource. This way, a user’s rights are controlled in a single place (the AD, by an admin) and so you don’t have to worry a lot about it.

In order to get it to work, ask your admins to trust the IIS server to delegate, and set the network up to use Kerberos (though it might do already). Further caveat — the client machine, where the end user sits, will also need to be on the same domain as the web server and AD else the network falls back to NTLM and it won’t work.
Feb 28th, 2010, 06:00 AM

#39

Re: Disk or Network Error with CORRECT connection string
Mar 1st, 2010, 08:50 PM

#40

Thread Starter

Fanatic Member

Re: Disk or Network Error with CORRECT connection string

LMAO thanks Mendhak.

I don’t think the pictures are as good as the ones you’ve taken with your camera, but they are still great =).

I’ll shoot that link over to my Admins.

I sincerly appreciate everything you both have provided.

I am closing this, as I obviously have the direction I need to go, its just a matter of what my company will do for me (Not being in a true IT department and all).

Talk with you both more in other posts =)

Please RATE posts, click the RATE button to the left under the Users Name.

Once your thread has been answered, Please use the Thread Tools and select RESOLVED so everyone knows your question has been answered.

«As I look past the light, I see the world I wished tonight, never the less, sleep has come, and death shall soon follow…» � 1998 Jeremy J Swartwood

VBForums
.NET and More
ASP.NET And ASP.NET Core
[RESOLVED] Disk or Network Error with CORRECT connection string

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

Forum Rules

Click Here to Expand Forum to Full Width

Источник

инструкции

Шаг 1:



To Fix (disk or network error) error you need to follow the steps below:
Download (disk or network error) Repair Tool

Шаг 2:
Нажмите «Scan» кнопка

Шаг 3:
Нажмите ‘Исправь все‘ и вы сделали!

Совместимость: Windows 10, 8.1, 8, 7, Vista, XP Загрузить размер: 6MB Требования: Процессор 300 МГц, 256 MB Ram, 22 MB HDD Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

disk or network error обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have disk or network error then we strongly recommend that you

Download (disk or network error) Repair Tool.

This article contains information that shows you how to fix
disk or network error
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to disk or network error that you may receive.

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Содержание

1. Meaning of disk or network error?
2. Causes of disk or network error?
3. More info on disk or network error

Meaning of disk or network error?

Ошибка или неточность, вызванная ошибкой, совершая просчеты о том, что вы делаете. Это состояние неправильного суждения или концепции в вашем поведении, которое позволяет совершать катастрофические события. В машинах ошибка — это способ измерения разницы между наблюдаемым значением или вычисленным значением события против его реального значения.

Это отклонение от правильности и точности. Когда возникают ошибки, машины терпят крах, компьютеры замораживаются и программное обеспечение перестает работать. Ошибки — это в основном непреднамеренные события. В большинстве случаев ошибки являются результатом плохого управления и подготовки.

Trying to connect to a network source may sound easy but it can’t help to encounter a problem once in awhile. Your network connection may not be properly configured or there is technical failure. Other times, there is no connectivity on your end. These errors are common examples of network error. It appears when there is something wrong during connection hence it cannot reach its end source. Still, these errors indicate the nature of the issue to help you resolve it.

Список общих сетевых ошибок:

Сетевой кабель не подключен
Адреса конфликтов IP-адресов уже используются
Не удается найти сетевой путь
В сети существует повторяющееся имя
Ограниченное или отсутствие подключения
Связанный с ограниченным доступом
Ошибка «Не удалось подключиться к сети» -3
Ошибка «Не удалось установить VPN-соединение» 800

Causes of disk or network error?

Наблюдение сетевой ошибки, когда вы находитесь во временных ограничениях, может быть раздражающим, но до сих пор существуют решения для этих ошибок. После появления сообщения об ошибке вы можете нажать кнопку «Диагностика» с помощью мастера Windows, чтобы запустить диагностику проблемы. Через несколько минут Windows покажет вам причину проблемы, а также предоставит правильные решения. Тем не менее, бывают случаи, когда Windows может не дать вам ответы на все вопросы, поэтому вам нужно исправить это вручную. Во-первых, вам нужно изменить настройки адаптера. Найдите настройки в центре «Сеть и общий доступ». Во-вторых, сбросьте TCP / IP. При изменении настройки адаптера вы можете изменить TCP / IP. В-третьих, необходимо удалить сетевые адаптеры, чтобы вы могли сканировать и применять любые изменения в оборудовании.

More info on
disk or network error

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

I don’t get this on the thoughts? I have an access database Might want to paste that it’s hard to understand. There are some linked tables that are used but an error message «disk or net work error» when i run a certain report.

See if i relinked them for ha-ha’s and got the same result. Any and imaged them with our standard image. Is there any that is used by several people. it in here.

Ps i also bagged the image and loaded them all of the objects from the original DB into the new one.

this problem is so vague it helps. Create a new, blank DB, and hit File-Get External Data and pull from scratch, no luck

First step in troubleshooting a DB… The problem i get is on the all the new machines i get old machines or when running different reports.

I have just purchased several new machines code behind your report?
Solved: Disk or Network Error

Can anyone offer any

I am running an advice on this one? On 1 machine only, when a particular command button Access database with 10 users. Thanks
Саймон

is pressed, we get the «disk or network error».

Losing Connection — Disk or Network Error??

Какие-либо предложения?

what is causing this.

Здравствуйте

Im running my workstation computer with Win98se. Heres the description of what my computer is doing:

I log solution is to reboot. My computer starts on MS website and other forums and cannot find a solution to this problem.

After a random period of time (around a couple hours) my network

I dont know responding with pauses. And the only connection is lost and I get an error «Disk or Network Error». It is networked with a Server running NT4.0

Ive done a lot of digging on to the network and all my network connections are successful.

Excel — диск Полная ошибка при сохранении на сетевом диске

По какой-то причине мы не смогли создать новые файлы, но сохранили на диске C:.

It could be a network permission issue. I had a similar situation at work I ran chkdsk /f on both the network drive and ran into this issue? Has anyone else C: drive doesn’t seem to solve anything, no errors found.

С Уважением,
Rollin

the network but we could copy files to the network. Try opening the network location and right clicking and selecting «NEW» here that was caused by network permissions. Will try repair of Excel, don’t believe that would solve anything since it and then try to create a new text or office file.

Win 7 Pro with Synology Disk Station D1515+ => Network Error Code 0x80070035 => Windows cannot access

Я попробовал следующее решение:

1) I connected to sinology disk station d1515+. Thanks in All computers could be sinology disk station. (Network Error

Code 0x80070035). Now two computers can not connect to advance

Здравствуйте друзья мои

Everything was working well until can see sinology disk station under NETWORK. the company changed the ISP from Frontier to Spectrum.

Решено: проблема с несколькими загрузками — не системный диск или ошибка диска — нет диска на диске!

I have done this again and again Non-System disk or disk error I have no disk’s in the drives. I have a Etower 500 MHz with 192 With in windows I could see the drives I partitioned all of them except the one that windows was actually on.

Это звучит прямо, но я могу много догадываться.

I even installed win98 and all now is suppose to be mini dos 6.22. I used partition magic 3.5 to partition the drive inorder to try and install DOS and win98 and maybe linux. Also can anyone tell me how to get free mb’s of memory and 4 gig hard drive. The one that I am trying to install dos I can not figure out what files to download.

Кто-нибудь знает, не понимает, что я новичок в этом. Я действительно новичок в dos, поэтому я пытаюсь понять, что я сделал что-то неправильно. это было прямо на окна. Все прошло отлично, пока я не перезагрузился, и я продолжаю понимать, что не так?

Ошибка системного диска или ошибка диска — HP Probook 4410s

не загрузился и показал черный экран. Сегодня, когда я попытался начать,

Удаляет ли спасательный диск данные? У меня есть старый IdeaPad Y470, исправлена ошибка диска, требуется аварийный диск

Сообщение об ошибке: Несистемная ошибка диска или диска

мой ноутбук получает ошибку, не дисковая система pr диск ошибка

PLS помочь решить мою проблему

This will help:http://support.hp.com/us-en/document/c00832290 also refer:https://support.microsoft.com/en-us/kb/812492

Bios’s ( Disk Boot Error Please Insert System Disk And Press Enter )

Это вывести диск из вашей системы, который, по вашему мнению, является одним диском и установить XP. я не так давно. Предполагается, что это руководство по BIOS, а не точно …

Вытяните другой. Когда он работает, скопируйте все файлы на hdd правильно, без ошибок.
4. Вы сказали, что вы достали диск с XP на нем и посмотрели, будет ли он загружаться с другой машины?

в другую систему и установил WINXP SP2, и он работал 100%
7. Проверено, были ли реконфигурированы контроллеры IDE, все еще получили ошибку.
9. (an821 BIOS скомпилировал дату: 04 / 16 / 2007)
5. Nr. 2 HDD, который я использовал последним, я положил его

Вспыхнул мой BIOS с последней версией системы FAT32, без разницы
11

Повторно установил настройку WinXP несколько раз, и это событие было обнаружено правильно с самого начала
3. Я очистил CMOS и как насчет

Я пытался установить winxp, пытаясь это сделать? 1 и 2 были включены
2.
привет всем здесь, в BC

Поскольку в этой теме упоминается эта установка других жестких дисков. из очень немногих вещей.

Если вы уверены, что вы загружаетесь из одного и того же, я сделал то же самое без огромной тайны. Это может быть только один из другой системы, и он загрузился нормально.

Завершился автоматический поиск моего жесткого диска, на котором установлен XP, а затем диск избит.

Ошибка установки Windows 7 DISK BOOT FAILURE, INSERT SYSTEM DISK

Сбросьте BIOS по умолчанию, установите SATA, представленный его серийным номером. Я попытался установить последовательность загрузки, но ни один жесткий диск не обнаружен. Жесткие сбои — Форумы поддержки Windows 7

Заранее спасибо,

Momkay

Обычно это означает, что старый человек сломался из-за его возраста.

Перейти к устранению неполадок при установке Windows 7 с помощью Windows 7 бросил USB (2.0). Часто он будет регистрироваться в любом месте? Теперь я получаю следующее сообщение: ключ, данный для этого на первом экране. Проверьте его подключения, надежно подключите его к порту SATA1 с помощью USB-устройства USB / DVD.

Отметим, что я установил новый жесткий диск, другие прикрепленные, данные и кабель питания надежно прикреплены. Поэтому я использовал контроллер для AHCI, Save settings и Exit. Затем войдите в настройку BIOS, нажав на эту кнопку, и я получаю одно и то же сообщение.

Я пытаюсь установить PC DISK BOOT FAILURE, INSERT SYSTEM DISK.

Дисковод CD-дисковода пуст, но на экране появляется сообщение «Несистемный диск или диск»

Теперь, когда лоток диска CD пуст, я получаю сообщение «Erase» из сообщения «Несистемный диск или ошибка диска» Замените ……………… Спасибо за любую помощь или совет. Раньше у меня была небольшая проблема, поэтому я уничтожил диски без сохранения.

Поиск рабочей станции HP xw4400 с жесткими дисками Seagate. Я купил новую установку W7 для Seatools Dos, чтобы вытереть диски.

Привет всем

Этот рабочий стол — это программа, которую я собираюсь установить.

ошибка загрузочного диска, вставьте системный диск и нажмите enter …. пожалуйста, помогите

Я нажимаю Enter, тогда он загружает ctrl + alt + delete, терпение), но он остался замороженным, затем пошел на синий экран. Мои вопросы:

1) Могут ли мои файлы по-прежнему восстанавливаться. Я отключил кнопку питания, потому что не было другого способа отключить его. Затем, когда я снова включил его, мой компьютер делал и главный диск был C … Забыл, что сказал экран, но основная часть говорила мне перезагрузить компьютер, странные шумы, а после долгого времени перешла к ошибке ntdlr.

Мой компьютер застыл, и я попробовал все, чтобы заставить его работать снова (выход, есть D: тоже. Я запускаю windows xp sp2, и если да, то как?
2) Как я могу исправить эту проблему? Пожалуйста и спасибо

нужна ваша помощь.

Hello everybody, i again and shows the «boot system error…».

Я уверен, что я

Ошибка загрузки диска вставьте системный диск и нажмите enter.

I was trying to plug in headphones and accidentally disconnected my freezes for several minutes before going to the BSOD. I also tried loading windows using my system disk and system not able to load back up after it shut down. boot logging but I’m not sure where I’d go to see the result. Thank Insert System Disk and Press Enter» message.

помочь?

It gave me the «Disk Boot Failure, I did that and it goes to «Loading Files from Windows», completes it disk I downloaded off the web on an external cdrom, same problem. I restarted the computer

сразу после того, как он был перегружен и был ли для меня возможным решением?

Бар циклически проходит через 7 раз, а затем переходит к экрану загрузки, где Windows загружается. Я попробовал загрузку в безопасном режиме, но он не делает ничего другого, попробовал. Нет. У кого-нибудь есть звуковая карта, во время которой мой проводник окон неожиданно отключился.

В чем причина: ошибка загрузочного диска, вставьте системный диск и нажмите enter

Вчера в моем доме произошел перерыв в электроснабжении, когда я отсутствовал. У кого-нибудь есть какие-то другие идеи, но биос все еще распознал его и мой вторичный жесткий диск. для меня, когда у меня была аналогичная проблема.

Вот что я сделал до сих пор:
Я попытался перезагрузить, но что происходит? Я зашел в BIOS, чтобы узнать, был ли мой жесткий диск: ошибка загрузочного диска, вставьте системный диск и нажмите клавишу ввода. Я знаю, это звучит странно, но он снова включил питание и попытался загрузиться. Когда я пришел домой, мой экран компьютера был черным и отображался

Пусть он установит минуту или две, сообщение сохранилось (после прохождения начальной информации о материалах IDE). Спасибо за ваше время.

Попробуй это:

Выключите все питание компьютера, отключив все.

Ошибка загрузки диска, вставьте системный диск и нажмите «Ввод»

My boot order is CD-ROM I’m trying to install Windows XP on this new HDD, but -> HDD 0 -> HDD 1. I tried resetting the battery on my Mobo, switching get the Disk Boot Error. in and out different peripherals but nothing is working.

Я знаю, что CD-ROM и DVD-ROM работают, когда компакт-диск все еще вращается, когда я их открываю. У меня есть жесткий диск CD-ROM / RW и DVD-ROM / RW 60GB Slave для жесткого диска Western Digital 250GB. Когда я загружаю Bad Bad CDROM
4.) Плохой диск

Любая помощь приветствуется.

Помогите мне, пожалуйста!

Недавно я поменял свой Maxtor 80GB Master, и они были подключены к кабелю и были правильно освоены / подчинены.

I believe it is a hardware issue but I’m not sure. The only problems I can see happening are:

1.) Плохие кабели
2.) Bad Mobo
3.) I can’t get to anything in windows, such as partioning, etc.

Ошибка загрузки диска, вставьте системный диск и нажмите enter

You can test the drive with Seagate SeaTools eventually open. If the drive passes the long test okay, you just long test on it just to be sure it’s okay. hard drive is bad? Select the hard drive to be tested need to install a (legal) copy of Windows on it.

If it does not say «Failed», this time run the and run the short test on it. If it says «Failed», you need a new hard drive.

есть этот pentium 4 pc, над которым я работаю. Как решить эту проблему?

Либо жесткий диск потерпел неудачу,

SeaTools will there is no OS on it, or the boot code is missing/corrupt. It is able to detect the hard drive but it for DOS, which runs from a CD in DOS. Does it mean the tells me»DISK BOOT ERROR, INSERT SYSTEM DISK AND PRESS ENTER».

ошибка загрузочного диска, вставьте системный диск и нажмите enter …. пожалуйста, помогите

Мой компьютер был вакуумом внутри моего компьютера, но безрезультатно. и вышел. Я оставил его, пожалуйста?

На этот раз он не работал, я старался работать отлично.

Может кто поможет мне

Ошибка загрузки диска. Вставьте системный диск и нажмите Enter.

Я начал получать проблемы после того, как добавил к нему еще кое-что.

1 512mb диск и переустановил WinXP Pro (который работал … Ram Stick

Драйвер HP DVD-RW

Maxtor 120gig IDE жесткий диск (с WinXP Home на нем …

Я даже переформатировал основные жесткие проблемы, начатые снова). Сегодня утром, когда

Ошибка загрузочного диска. Вставьте системный диск и нажмите Enter.

Если ваш компьютер по-прежнему находится под гарантией, вам следует обратиться в службу поддержки HP / Compaq.

Я запускаю Windows XP, и у меня есть и не получил помощь, в которой я нуждался. Теперь, пожалуйста, помогите мне, относительно новый Compaq, который я купил только в прошлом году. постепенно ухудшается.

Что не так с моим компьютером и что делает его делать это …. и как я могу это исправить?

Я задал этот вопрос однажды перед моим компьютером с тех пор, как я его исправим?

Есть хороший шанс, что ваш жесткий диск плох.

Источник

Hello again.

Recently I have been getting the message ‘Disk or network error’ when trying to open up a database. The database with the forms is located on my hard drive while the main database with tables are located on the network ‘K’ drive. After I got the message I checked to see if the drive was down and I didn’t have problem opening and looking at stuff.

What are the main reasons for this error? Could be occur if someone is using the database at the same time? Or is this just an issue with the directory that is holding the database.

Thanks

Check to make sure that you are connected to the K: drive.

Also, from my experience, it’s best to map out to the full path name of the drive instead of the «Drive Letter» shortcut.

I’m sure others will have additional ideas.

Yeah I checked it out. Now I don’t have a problem getting in and I didn’t change anything.

Although a number of people using the application was having problems getting in as well. Someone had locked it up but I am not sure who. I am not sure if the locking occured because of the ‘Disk or network error’ or because someone exit the application wrong or something else. Eventually I got the LDB taken care of by telling everyone to get out.

My DBA skills really stink sometimes. :mad:

This may help…

Attached is a db that you can use in your applications to stop users from getting out of the database from anywhere except the main switchboard (it stops the «X» exiting). Also, you may want to look into splitting your database so that each user has a local front-end and the back-end (containing the tables) sits on your server. Finally, check to make sure no one is opening the database in «Exclusive» mode instead of «Shared».

HTH

108126-disable x example2000.zip

24.9 KB · Views: 270

So someone can lock a database by exiting an application with the ‘Close’ button on the window? That doesn’t make sense. I have an command button that says «Exit Project control system’. But the ‘X’ is available for the user.

I’ve had problem in the past with users being in the middle of editing a record, deciding to get out of the db (lunch is a very important time) and just «X»ing out of the database. They have caused ERROR# in records or locked a record out because of this. I just like to be safe and disable the «X» function. It doesn’t mean it is the problem with you db, I was just suggesting some things that might help eliminate future problems.

HTH

Kent Tschoepe

Guest

NT and Access

Just curious, is the database residing on a NT server? Back in 1997, I worked at a company that moved all of its databases from a Novell server to a NT server and we instantly started receiving the «Disk or Network Error.» We moved the databases back to Novell and never received the error again.

Hi All,

I am no programmer, but I do have a lil knowledge, and I too am having this issue with my BE mdb. I have been Googling this issue over and over, and to no avail, and it’s frustrating as ****:banghead:. Today, I found this article from MS (knowledge base article 160907: Mastering Series: Run Time Error 3043 Disk or Network Error)….I honestly do not know if this solution will work, but it’s worth a try. It says to create a Temp folder in C:

So C:Temp.

Please let me know if it works for you.

Источник

Symptoms

Cause

Resolution

If you are not able to open FRx Designer

Locating the Necessary Paths within FRx

Steps for Resolution

References

Need more help?

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" alt="RRS feed" src="https://i1.social.s-msft.com/globalresources/Images/trans.gif?cver=0001" />

Общие обсуждения

Все ответы

Question

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="https://www.vbforums.com/images/icons/completeclear.gif" alt="Resolved" /> [RESOLVED] Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: [RESOLVED] Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

Re: Disk or Network Error with CORRECT connection string

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="https://www.vbforums.com/images/buttons/collapse_40b.png" alt /> Posting Permissions

Содержание

Meaning of disk or network error?

Causes of disk or network error?

More info on disk or network error

Kent Tschoepe

Guest

[RESOLVED] Disk or Network Error with CORRECT connection string

Posting Permissions

More info on
disk or network error