Divinity original sin 2 dxgi error device removed

DirectX Error DXGI_ERROR_DEVICE_REMOVED — как исправить ошибку

Иногда во время игры или просто при работе в Windows вы можете получить сообщение об ошибке с кодом DXGI_ERROR_DEVICE_REMOVED, «DirectX Error» в заголовке (в заголовке окна может быть и название текущей игры) и дополнительной информацией, касающейся того, при выполнении какой операции возникла ошибка.

В этой инструкции подробно о возможных причинах появления такой ошибки и способах её исправить в Windows 10, 8.1 или Windows 7.

Причины ошибки

В большинстве случаев ошибка DirectX Error DXGI_ERROR_DEVICE_REMOVED не связана с конкретной игрой, в которую вы играете, а имеет отношение к драйверу видеокарты или к самой видеокарте.

При этом, сам текст ошибки обычно расшифровывает этот код ошибки: «The video card has been physically removed from the system, or a driver upgrade for the video card has occurred», что в переводе будет «Видеокарта была физически удалена из системы или произошло обновление драйвера».

И если первый вариант (физическое удаление видеокарты) во время игры маловероятен, то второе вполне может оказаться одной из причин: иногда драйверы видеокарт NVIDIA GeForce или AMD Radeon могут обновляться «сами» и, если это произойдет во время игры вы получите рассматриваемую ошибку, которая впоследствии должна пропасть сама.

Если же ошибка возникает постоянно, можно предположить, что причина более сложная. Наиболее распространенные причины, вызывающие ошибку DXGI_ERROR_DEVICE_REMOVED приведены далее:

• Неправильная работа конкретной версии драйверов видеокарты
• Недостаток питания видеокарты
• Разгон видеокарты
• Проблемы с физическим подключением видеокарты

Это не все возможные варианты, но наиболее часто встречающиеся. Некоторые дополнительные, более редкие случаи, будут также рассмотрены далее в руководстве.

Исправление ошибки DXGI_ERROR_DEVICE_REMOVED

Для того, чтобы исправить ошибку для начала рекомендую по порядку выполнить следующие действия:

1. Если вы недавно вынимали (или устанавливали) видеокарту, проверить, что она плотно подключена, контакты на ней не окислены, дополнительное питание подключено.
2. Если есть возможность, проверить эту же видеокарту на другом компьютере с той же игрой с теми же параметрами графики, чтобы исключить неисправность самой видеокарты.
3. Попробовать установить другую версию драйверов (в том числе более старую, если недавно произошло обновление до последней версии драйверов), предварительно полностью удалив имеющиеся драйверы: Как удалить драйверы видеокарты NVIDIA или AMD.
4. Для того, чтобы исключить влияние недавно установленных сторонних программ (иногда они также могут вызывать ошибку), выполните чистую загрузку Windows, а затем проверьте, будет ли проявлять себя ошибка в вашей игре.
5. Попробуйте выполнить действия, описанные в отдельной инструкции Видеодрайвер перестал отвечать и был остановлен — они могут сработать.
6. Попробуйте в схеме электропитания (Панель управления — Электропитание) выбрать «Высокая производительность», а затем в «Изменить дополнительные параметры электропитания» в разделе «PCI Express» — «Управление питанием состояния связи» установите «Откл.»
7. Попробуйте снизить настройки качества графики в игре.
8. Скачайте и запустите веб-установщик DirectX, если он найден поврежденные библиотеки, они будут автоматически заменены, см. Как скачать DirectX.

Обычно, что-то из перечисленного помогает решить проблему за исключением случая, когда причиной является недостаток питания со стороны блока питания во время пиковых нагрузок на видеокарту (хотя и в этом случае может сработать снижением параметров графики).

Дополнительные методы исправления ошибки

Если ничто из вышеописанного не помогло, обратите внимание на несколько дополнительных нюансов, которые могут иметь связь с описываемой ошибкой:

• В параметрах графики игры попробуйте включить VSYNC (особенно если это игра от EA, например, Battlefield).
• Если вы изменяли параметры файла подкачки, попробуйте включить автоматическое определение его размера или увеличить (8 Гб обычно достаточно).
• В некоторых случаях избавиться от ошибки помогает ограничение максимального энергопотребления видеокарты на уровне 70-80% в MSI Afterburner.

И, наконец, не исключен вариант, что виновата конкретная игра с багами, особенно если вы её приобрели не из официальных источников (при условии, что ошибка появляется только в какой-то конкретной игре).

А вдруг и это будет интересно:

10.10.2018 в 11:56

Дмитрий Спасибо за ваши труды. А нельзя ли поподробней узнать об этом вот —
«PCI Express» — «Управление питанием состояния связи». Что и когда там надо выставлять и на что это влияет? Такая настройка у меня есть и в Биосе, но уж очень мутные пояснения к ней. И ещё, вы пишите опять про файл подкачки. У меня ССД 128 ГБ. Так ли уж он всё таки нужен мне. Я не играю в игры, но много работаю с мультимедийной графикой, и с видео высокого разрешения. Нужен ли он мне, у меня установлен заданный размер в 1024 Мб. Спасибо. Надеюсь на ответ. С этими ССД нигде нет однозначного ответа. Кто что пишет.

11.10.2018 в 11:57

Здравствуйте.
1. Этот параметр отвечает за выключение интерфейса PCI-E, когда данные по нему не передаются. Экономит энергию. Но может вызывать ошибки в некоторых случаях.
2. Про файл подкачки — вообще, пока вам не сообщат эти самые программы для работы с графикой/видео о том, что им недостаточно памяти или не начнут вылетать странным необъяснимым образом, можете оставить всё как есть. А вот если сообщат — вспомнить о файле подкачки, т.к. причина может быть в нём.

Но тут есть один нюанс: иногда они могут и вовсе не сообщить ни о чем подобном, а вы, незаметно для себя будете терять в производительности (тут зависит от конкретного софта и прочего), хотя это может показаться и не логичным (ведь RAM быстрее и всё такое).

Вы, кстати, можете легко протестировать, учитывая софт, с которым работаете: к примеру, взяли проект видео потяжелее с эффектами и прочим, но покороче, который рендерится в районе 10-15 минут, запустили, посмотрели сколько заняло времени при текущих настройках.
Закрыли программу, изменили настройки файла подкачки (выставили авто или побольше, скажем, 8-16 Гб), перезагрузили компьютер, снова запустили просчет того же проекта. Сравнили время.

В плане срока жизни SSD при включенном файле подкачки — это не то, о чем стоит переживать. Достаточно надежны они сегодня и скорее вы его просто поменяете, чем он выйдет из строя.

Источник

Divinity original sin 2 dxgi error device removed

I have started getting crash message (see below) within 5mins of loading a game. I have already sunk countless hours into the game recently without too much of an issue. Only recently changes have been been to update my graphics drivers (which i have rolled back, but still crashes).

I have searched google for solutions, and have found people with similar errors but havn’t been able to find any clear solution. Has anyone fixed this error before? What did you do?

«The game has encountered an unrecoverable DirectX error and will shut down.
This error may be triggered by reasons that are not related to Divinity: Original Sin 2.

Please try the following before restarting:
— Disable any screen recording software you may be running (Check)
— Make sure you have the latest graphics drivers installed (Check)
— Disable SLI/CrossFireX (Check)

We are sorry for the inconvenience.

Error: DXGI_ERROR_DEVICE_REMOVED
Description: Hardware Device Removed.
Reason: DXGI_ERROR_DEVICE_HUNG»

My specs:
Windows 10 64bit
AMD Phenom X4 965 3.4ghz
NVIDIA Geforce GTX 570 — latest drivers
RAM 8gb

I am experiencing the same thing. This used to be a problem originally when the game was first released I guess and they patched it out. Now it’s back. Might be awhile before they fix it sadly. Pretty disappointing spending 60$ on a new game and not being able to play more than 5-10 minutes at a time. I think a lot of people are getting this error.

I’ve tried many things, nothing has worked so far. The only thing I haven’t tried is someone had recommended downclocking the video card, not doing that.

My specs:
Windows 10 64bit
i7 8700
NVIDIA Geforce GTX 1080ti — latest drivers
RAM 16gb 2666
Alienware aw3418dw (3440×1440 resolution)

Getting exactly the same thing too, Never crashed once in the classic edition.

As soon as they release the definitive edition it will sometimes crash within 5-10 minutes, sometimes I can play for hours no issue.
So Bizzare.

Windows 10 64bit
i7 8700k
Nvidia GTX 1080 — Driver 399.07
3200mhz DDR4 RAM
Playing at 1440p 144hz

I had also previously played for hours on classic and even DE with no issues.

But since i have last posted, i have reformatted and reinstalled steam and restored the game from a backup. I havn’t updated my gfx drivers just yet, and it seems to have worked now. No issues for hours.

Next thing i might try is updating my drivers and hoping that it continues to not crash.

There is a known issue with Windows 7 and the modding engine. I see some of you are using Windows 10 which adds a new flavor to the problem. Perhaps it’s a related issue as it’s the same error message. If it is, you should expect a fix soon as I know they’re currently working on a hotfix for that.

I’d at first suggest making sure you have the latest graphics driver, and try running the game in standard 1920×1080 resolution, either fullscreen or borderless.

If that doesn’t work (or even if it does), I’d recommend making a post at their forums.
http://larian.com/forums/ubbthreads.php?ubb=postlist&Board=68&page=1

Larian actively reads the forums and the discord modding channels, and if you do feel response is slow, try mailing them (support(at)larian.com) on the tech support on the website, or tell me and I’ll throw a nudge their way to make sure they’re aware :>

Bought the game this weekend,

My specs:
Windows 10 64bit
radeon 5 2600
radeon 590x
RAM 16gb 3000

running on ultra and high and game keeps crashing with the same error message. Any solutions?

A couple of game updates ago, one person reported getting this error on a monitor with a 144Hz refresh rate, but could avoid it limiting the game to 60FPS. That issue should be fixed, but you could try setting an FPS cap or lowering the game resolution or settings, to see if that makes a difference (in early development builds, some people in QA occasionally got this error when running multiple instances of the game, or running the editor and game at the same time).

A clean re-install of the graphics drivers may help. See here [www.tomshardware.com] or here [www.tweakguides.com] , for example.

Several people have reported fixing this error by using MSI Afterburner [event.msi.com] to slightly underclock their graphics card [forums.geforce.com] (‘lower both the «Core Clock» and «Memory Clock» options by around 100 (so they say -100). Apply and close.’).

G-Sync / FreeSync:
One person with an nvidia card reported that disabling G-Sync in their drivers reduced the frequency of DXGI_ERROR_DEVICE_REMOVED crashes. Unfortunately, in that case the problem was hardware related, and other games started crashing before the card died completely.

There are a couple D:OS EE topics on this error (it seems to be rarer in D:OS 2):

Источник

Divinity original sin 2 dxgi error device removed

This game has to be one of the Best RPGS ive played in years but the frequent crashing is BRUTAL. I can play Warhammer 2 for hours and experience no crashes. I do not believe this is a video card going out. This error only appears with Divinity 2. Does anyone have any information on this problem.

Divinity 2 will crash randomly within 5mins to 2hours.

Intel(R) Core(TM) i7-4470k CPU @ 3.50GHz
RAM 16.0 GB
Windows 10 64 bit
Nvidia GeForce GTX 760

«The game has encountered an unrecoverable DirectX error and will shut down.
This error may be triggered by reasons that are not related to Divinity: Original Sin 2.

Please try the following before restarting:
— Disable any screen recording software you may be running (Check)
— Make sure you have the latest graphics drivers installed (Check)
— Disable SLI/CrossFireX (Check)

We are sorry for the inconvenience.

Error: DXGI_ERROR_DEVICE_REMOVED
Description: Hardware Device Removed.
Reason: DXGI_ERROR_DEVICE_HUNG»

Does anyone have any information on this problem. Help this nerd 🙂

This game has to be one of the Best RPGS ive played in years but the frequent crashing is BRUTAL. I can play Warhammer 2 for hours and experience no crashes. I do not believe this is a video card going out. This error only appears with Divinity 2. Does anyone have any information on this problem.

Divinity 2 will crash randomly within 5mins to 2hours.

Intel(R) Core(TM) i7-4470k CPU @ 3.50GHz
RAM 16.0 GB
Windows 10 64 bit
Nvidia GeForce GTX 760

«The game has encountered an unrecoverable DirectX error and will shut down.
This error may be triggered by reasons that are not related to Divinity: Original Sin 2.

Please try the following before restarting:
— Disable any screen recording software you may be running (Check)
— Make sure you have the latest graphics drivers installed (Check)
— Disable SLI/CrossFireX (Check)

We are sorry for the inconvenience.

Error: DXGI_ERROR_DEVICE_REMOVED
Description: Hardware Device Removed.
Reason: DXGI_ERROR_DEVICE_HUNG»

Does anyone have any information on this problem. Help this nerd 🙂

As I stated on another post

On AMD I know going into Radeon Settings I choose the game in the Gaming section and go to Profile OverDrive.. then set theGPU Clock to 915MHz and the Memory Clock to 1050MHz..

I just downloaded the game, and it will stay minimized in the task bar.

Windows 10 (64-bit)
intel core i7-6700 cpu @ 3.40GHz
3.41 GHz
16.0 GB RAM
NVIDIA GeForce GT 730

Источник

Are you experiencing DirectX Error in Divinity Original Sin 2? Divinity Original Sin 2 is a popular role-playing video game developed by Larian Studios. While gamers have an amazing time playing the game, they also run into some errors here and there. One such error is DirectX Error which a lot of users have reportedly encountered. Some users have encountered the error while launching the game, while many got the error during the gameplay.

When triggered, you will get the following error message:

The game has encountered an unrecoverable DirectX error and will shut down.
This error may be triggered by reasons that are not related to Divinity: Original Sin 2.

Please try the following before restarting:
-Disable any screen recording software you may be running
-Make sure you have the latest graphics drivers installed
-Disable SLI/CrossFireX

We are sorry for the inconvenience.

Error: DXGI_ERROR_DEVICE_REMOVED
Description: Hardware device removed.
Reason: DXGI_ERROR_DEVICE HUNG

Now, if you are one of the affected users, this post is for you. In this post, we are going to discuss several fixes that will help you get rid of DirectX Error in Divinity Original Sin 2. But, before that, let us try and understand the scenarios that might trigger this error.

What causes DirectX Error in Divinity Original Sin 2?

Here are the potential causes that might trigger DirectX Error in Divinity Original Sin 2:

• It could be caused because of out-of-date graphics driver. So, if your graphics drivers are not updated, update them to fix the error.
• Outdated Windows OS can be another reason for the same error. Hence, make sure you have installed all the pending Windows updates on your system.
• If you have set your display resolution other than the recommended one, it might cause an issue with the game and trigger the error at hand. So, change your display resolution to the recommended setting to resolve the error.
• Conflicting apps like screen recorders, liver streaming applications, etc., can also trigger the error. If the scenario is applicable, try closing such apps and see if the error is fixed.
• Overclocking can also cause the error at hand. So, try disabling overclocking software to fix the error.
• If the DirectX installation has gone corrupted, you will face the error at hand. In that case, you can reinstall the DirectX package to fix the error.

Now that you know the reason behind DirectX Error in Divinity Original Sin 2, let us check out the fixes.

Here are the fixes you can try to resolve DirectX Error in Divinity Original Sin 2:

1. Make sure your graphics driver is up-to-date.
2. Update Windows.
3. Try using the recommended resolution settings.
4. Disable overclocking.
5. Close conflicting apps.
6. Disable Full-Screen Optimization and run the game in compatibility mode.
7. Reinstall DirectX.

Divinity Original Sin 2 encountered an unrecoverable DirectX error

1] Make sure your graphics driver is up-to-date

You are likely to encounter DirectX Error in Divinity Original Sin 2 if you are having outdated system drivers, especially graphics drivers. Hence, make sure you have updated your graphics as well as other device drivers to their latest versions.

The following methods can be used to update your graphics driver on Windows PC:

You can open your Settings app using the Win+I hotkey and go to the Windows Update > Advanced options section. After that, tap on the Optional Updates option and then download and install all the pending driver updates. If you want to use the Device Manager app, you can update graphics drivers through it.

Another method is to download and install the recent version of your graphics driver model from the device manufacturer’s official website. Apart from that, you can even try using a free third-party driver updater to automatically scan outdated device drivers and update them.

Once your graphics driver is updated, reopen the game and see if the error is resolved or not. If not, try the next potential fix.

Read: DirectX function GetDeviceRemovedReason failed with DXGI error.

2] Update Windows

You are likely to experience the error at hand if you are using an outdated Windows OS. Hence, if the scenario is applicable, update your Windows by installing all the pending updates. Press Win+I hotkey to open the Settings app and then go to the Windows Update tab. After that, click on the Check for updates button and let Windows download and install the pending Windows updates.

Once the updates are installed and your system is restarted, open the Divinity Original Sin 2 game and check if DirectX Error is fixed or not.

See: DirectX failed to initialize error on Windows 11/10.

3] Try using the recommended resolution settings

If you have changed your default resolution settings, it could result in the error at hand. Hence, use the recommended resolution setting by resetting it to default and see if the error is fixed. Here’s how to do that:

1. First of all, launch the Settings app by pressing the Windows+I hotkey.
2. Now, go to the System > Display section and click on the Display resolution drop-down option.
3. Next, select the recommended display resolution from the appeared options.
4. Once the settings are applied, relaunch the game and check if the error is resolved or not.

If the problem still persists, move on to the next potential solution to fix the error.

Read: Fix microsoft.directx.directdraw.dll was not found or is missing error.

4] Disable overclocking

If you have enabled overclocking on your system, try disabling it and then check if the error is resolved or not. Overclocking helps in enhancing the speed of your PC. But, in many instances, it can be problematic and can trigger stability issues with your games and apps. So, if the scenario is applicable, you try turning off overclocking and see if DirectX Error in Divinity Original Sin 2 stops or not.

In case the error keeps popping up, try the next potential fix to resolve it.

5] Close conflicting apps

In a few instances, this error could be triggered due to conflicting apps like screen recorder apps, live-streaming apps, Xbox Game bar, Discord, etc. Hence, you can try closing all such apps and see if the error is resolved or not.

To close conflicting programs, open Task Manager using Ctrl+Shift+Esc. Then, from the Processes tab, select a process and click on the End Task button. You can close all the conflicting apps and then check if the error is fixed or not.

In case you still get DirectX Error in Divinity Original Sin 2, go ahead and try the next potential fix to resolve the error.

See: Origin DirectX Setup Error: An internal error has occurred.

6] Disable Full-Screen Optimization and run the game in compatibility mode

The error might be triggered if there is a compatibility issue or if you have enabled fullscreen optimization for the game. So, if the scenario is applicable, try disabling Full-Screen Optimization and run the game in compatibility mode to fix the error. Here’s how to do that:

1. Firstly, open the Steam client, go to LIBRARY, and right-click the Divinity Original Sin 2 game.
2. Now, select the Properties option, move to the Local Files tab, and tap on Browse Local Files to open the game’s installation directory.
3. Next, right-click on the game’s executable file and press the Properties option.
4. After that, go to the Compatibility tab, enable the Run this program in compatibility mode for: checkbox, and select a Windows version.
5. Then, check the option called Disable fullscreen optimizations and press Apply > OK to save changes.

You can now try relaunching the game and see if the error is fixed.

7] Reinstall DirectX

If none of the above solutions works for you, try reinstalling the DirectX package to fix the error. For that, you will have to uninstall DirectX and then install it again. You can download the latest version of DirectX from the Microsoft Download Center. After that, install the package on your system and reboot your system. Then, try relaunching the game and hopefully, the error will be fixed now.

Read: DirectDraw Initialization Failed on Windows PC.

What causes DirectX error?

DirectX error like DirectX encountered an unrecoverable error is often caused due to outdated graphics. Other than that, it can also be caused due to your display settings, corrupted installation files, etc. So, to fix the error, you can try rebooting your computer, checking for Windows updates, checking the minimum requirements, restarting the game, checking Display scaling settings, or reinstalling the game or application. These are some basic troubleshooting methods. If the error still persists, you can try disabling hardware monitoring software, updating or reinstalling GPU drivers, deleting games’ cache files, or running DirectX Diagnostic Tool.

That’s it.

How do I fix DirectX error?

If you are facing the DirectX error on Divinity Original Sin 2, update your graphic driver to its latest version. Apart from that, update your Windows OS, use the recommended display resolution, turn off overclocking software, or close screen recorders and other conflicting apps to fix the error. If nothing works, you can try uninstalling and then reinstalling the DirectX package. We have discussed these fixes in detail which you can check out below.

Now read:

• Fix VALORANT DirectX Runtime error on Windows 11/10.
• Fix Resident Evil Village DirectX Error on Windows PC.