Error 0xc02020a1 data flow task 1 data conversion failed

I am trying to upload a CSV file (comma delimited) to a SQL Server 2012 (vs 11.0.2100.60) table. I have created a table with all columns equal to nvarchar(MAX) for test purposes as I just want to get the data into the database just to test. Unfortunately, I keep getting the following error:

Messages Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column «Column 2» returned status
value 4 and status text «Text was truncated or one or more characters
had no match in the target code page.». (SQL Server Import and Export
Wizard)

Error 0xc020902a: Data Flow Task 1: The «Source —
Book2_txt.Outputs[Flat File Source Output].Columns[Column 2]» failed
because truncation occurred, and the truncation row disposition on
«Source — Book2_txt.Outputs[Flat File Source Output].Columns[Column
2]» specifies failure on truncation. A truncation error occurred on
the specified object of the specified component. (SQL Server Import
and Export Wizard)

Error 0xc0202092: Data Flow Task 1: An error
occurred while processing file
«C:UsersshalinpDesktopMISOjunkBook2.txt» on data row 3. (SQL
Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task 1:
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on
Source — Book2_txt returned error code 0xC0202092. The component
returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the
error is fatal and the pipeline stopped executing. There may be error
messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

My file is large but I created a new file that only has the first 4 rows of data to test. Unfortunately stackoverflow does not let you upload a file so I can’t provide it (correct me if I am mistaken?).

But here is a cut and paste of it:

1/1/2010,ARNLD HAZELTON BASE,HAZLTON HAZLTARNOL34_1 1 (LN/ALTW/ALTW),ACTUAL,1,($23.18)
1/1/2010,MANISTIQ_T1_T1_XF,MANISTIQ T1 T1 (XF/WEC/*),,1,($12.47)
1/1/2010,ONT-NYIS BASE,BECK2 BECK2GPACKAR_1 A (LN/ONT/NYISO); BECK2 BECK_BNIAG_3_1 A (LN/ONT/NYISO); BECK2 BECK_ANIAG_3_1 A (LN/ONT/NYISO); STLAWRE1 SAUND_MOSES1_1 A (LN/ONT/NYISO); BECK2 BECK2GNIAG_3_1 A (LN/ONT/NYISO); STLAWRE1 SAUND_MOSES__1 A (LN/ONT/NYISO),ACTUAL,1,($6.05)
1/1/2010,PADDCK_TWNLINE FLO PADDCK_BLACKHWK,TOWNELIN TLR_PAD 1 (LN/ALTE/ALTE),PADDOCK-BLACKHAWK 138 (X-53),1,($3.06)

I suspect the failure is occurring in row 3, column 3, which has a long text string:

BECK2 BECK2GPACKAR_1 A (LN/ONT/NYISO); BECK2 BECK_BNIAG_3_1 A (LN/ONT/NYISO); BECK2 BECK_ANIAG_3_1 A (LN/ONT/NYISO); STLAWRE1 SAUND_MOSES1_1 A (LN/ONT/NYISO); BECK2 BECK2GNIAG_3_1 A (LN/ONT/NYISO); STLAWRE1 SAUND_MOSES__1 A (LN/ONT/NYISO)

That said, this is why I’m using type nvarchar(max). In any case I appreciate the help.

Thank you.

FIX: 0xC02020A1, 0xC020902A, 0xC0202092, and 0xC0047038 errors may occur at the same time when you try to run an SSIS 2005 package if you use multi-character column delimiters in a Flat File source

Consider the following scenario:

You create a SQL Server 2005 Integration Services (SSIS) package in Business Intelligence Development Studio (BIDS).

You use a Flat File source to read data from a text file in a data flow task.

You use a multi-character column delimiter in the Flat File source. For example, the multi-character column delimiter is a character string of three tilde characters (

The text file contains a large amount of data. For example, the text file contains more than 20,000 records.

You run the SSIS package.

In this scenario, the SSIS package may fail. Additionally, you receive the following error messages:

Error: 0xC02020A1 at Data Flow Task, Flat File Source [1]: Data conversion failed. The data conversion for column « » returned status value 4 and status text «Text was truncated or one or more characters had no match in the target code page.».

Error: 0xC020902A at Data Flow Task, Flat File Source [1]: The «output column « » (199)» failed because truncation occurred, and the truncation row disposition on «output column « » (199)» specifies failure on truncation. A truncation error occurred on the specified object of the specified component.

Error: 0xC0202092 at Data Flow Task, Flat File Source [1]: An error occurred while processing file «

Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component «Flat File Source» (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Symptoms

This issue occurs because the input buffers for the flat file parser incorrectly divide the multi-character delimiter into two parts.

Cause

Service pack information

To resolve this issue, obtain the latest service pack for SQL Server 2005.

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

913089 How to obtain the latest service pack for SQL Server 2005

Resolution

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the «Applies to» section.

Источник

Error 0xc02020a1: Data Flow Task 1: Data conversion failed «Text was truncated or one or more characters had no match in the target code page.»

I’m trying to import a text file in my mssql database via SSMS import utility and it’s throwing below error:

Suggested solutions available on internet, I have changed the code page to 65001(UTF-8). However, after updating that,I’m getting this new error:

Also, ‘Edit Mappings’ section isn’t allowing me to increase column size as well.

any help will be appreciated in order to import my file

Here is the sample data which I want to import: EmployeeID,LastName,FirstName,BirthDate,Photo,Notes 1,Davolio,Nancy,1968-12-08,EmpID1.pic,Education includes a BA in psychology from Colorado State University. She also completed (The Art of the Cold Call). Nancy is a member of ‘Toastmasters International’.

1 Answer 1

To import to a new table enter the name of the destination table (the one that will be created) for the Destination field and make sure there isn’t already a table with this name in the database. Once a new name is entered, you can make modifications to the destination columns on the Column Mappings window that appears after the Edit Mappings button is pressed. In the following example, the name NewTableName was typed into this destination field and this will be the destination table. If you’re having trouble locating the table in the destination database make sure the correct database is selected on the Choose a Destination page of the Import and Export Wizard. This is equivalent to the Initial Catalog property of a connection string, and you’ll see the selected database there for the connection manager of the destination if you save the package and open it in SSDT.

Hot Network Questions

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

Site design / logo © 2023 Stack Exchange Inc; user contributions licensed under CC BY-SA . rev 2023.1.14.43159

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник

SQL Server : data import failed via flat file Error 0xc02020a1: Data Flow Task 1: Data conversion failed

I am trying to upload a CSV file (comma delimited) to a SQL Server 2012 (vs 11.0.2100.60) table. I have created a table with all columns equal to nvarchar(MAX) for test purposes as I just want to get the data into the database just to test. Unfortunately, I keep getting the following error:

Messages Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column «Column 2» returned status
value 4 and status text «Text was truncated or one or more characters had no match in the target code page.». (SQL Server Import and Export Wizard)

Error 0xc020902a: Data Flow Task 1: The «Source — Book2_txt.Outputs[Flat File Source Output].Columns[Column 2]» failed because truncation occurred, and the truncation row disposition on «Source — Book2_txt.Outputs[Flat File Source Output].Columns[Column 2]» specifies failure on truncation. A truncation error occurred on the specified object of the specified component. (SQL Server Import and Export Wizard)

Error 0xc0202092: Data Flow Task 1: An error occurred while processing file «C:UsersshalinpDesktopMISOjunkBook2.txt» on data row 3. (SQL Server Import and Export Wizard)

Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source — Book2_txt returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard)

My file is large but I created a new file that only has the first 4 rows of data to test. Unfortunately stackoverflow does not let you upload a file so I can’t provide it (correct me if I am mistaken?).

But here is a cut and paste of it:

I suspect the failure is occurring in row 3, column 3, which has a long text string:

That said, this is why I’m using type nvarchar(max) . In any case I appreciate the help.

Источник

Error 0xc02020a1 data flow task 1 data conversion failed

I have spent the last full two days on this.

All I am trying to do is import a csv into a new table.

Once I have this working, I’ll be import a 260 million row file and then smaller files each week thereafter.

I have 7 fields out of about 60, where my source csv data looks similar to this:

I have tried using: double quote («),and a pair of the double quotes («»), and nothing. I always get an:

— Executing (Error)
Messages
Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column «Lorem_Ipsum» returned status value 4 and status text «Text was truncated or one or more characters had no match in the target code page.».
(SQL Server Import and Export Wizard)

Error 0xc020902a: Data Flow Task 1: The «Source — Test export.csv.Outputs[Flat File Source Output].Columns[Lorem_Ipsum]» failed because truncation occurred, and the truncation row disposition on «Source — Test export.csv.Outputs[Flat File Source Output].Columns[Lorem_Ipsum]» specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)

I am using MS SQL Server management Studio and SQl Server 2016.

I am using the’ flat file’ data source for the source, and have tried both the:

‘Microsoft OLE DB provider’ for SQL Server and the ‘SQL Server native Client 11.0’ as the destination.

I did see a menu yesterday for ‘Convert’ and ‘On Error’ but today, I can’t get the Management Studio to provide those options.

I don’t think i want to ignore the truncation error, but it seems odd that I don’t have the same options today as i had yesterday. I’ve created new tables to see if it was a problem with using the same data file source and destination table, but that wasn’t it.

Asking the vendor to change their delimiter is not an options as it is COTS.

Any help guidance, whatever that will help me import this data sanely will be quite appreciated.

Источник

Errors in SQL Server while importing CSV file despite varchar(MAX) being used for each column

I’m trying to insert a large CSV file (several gigs) into SQL Server , but once I go through the Import Wizard and finally try to import the file I get the following error report:

Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column «»Title»» returned status value 4 and status text «Text was truncated or one or more characters had no match in the target code page.».

( SQL Server Import and Export Wizard )

Error 0xc020902a: Data Flow Task 1: The «Source — Train_csv.Outputs[Flat File Source Output].Columns[«Title»]» failed because truncation occurred, and the truncation row disposition on «Source — Train_csv.Outputs[Flat File Source Output].Columns[«Title»]» specifies failure on truncation. A truncation error occurred on the specified object of the specified component.

( SQL Server Import and Export Wizard )

Error 0xc0202092: Data Flow Task 1: An error occurred while processing file «C:Train.csv» on data row 2.

( SQL Server Import and Export Wizard )

Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source — Train_csv returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

( SQL Server Import and Export Wizard )

I created the table to insert the file into first, and I set each column to hold varchar(MAX), so I don’t understand how I can still have this truncation issue. What am I doing wrong?

Источник

I have spent the last full two days on this.

All I am trying to do is import a csv into a new table.

Once I have this working, I’ll be import a 260 million row file and then smaller files each week thereafter.

I have 7 fields out of about 60, where my source csv data looks similar to this:

«<LoremIpsum LOR=»»/All AllLorems/IpSum Lorems/Lorem Espilon/LOREM/1.23.4.5-5.43.2 (PICNIC)»» ID=»»M-kdfkgj8459jdfskgf==»»/>»

I have tried using: double quote («),and a pair of the double quotes («»), and nothing. I always get an:

I am using MS SQL Server management Studio and SQl Server 2016.

I am using the’ flat file’ data source for the source, and have tried both the:

‘Microsoft OLE DB provider’ for SQL Server and the ‘SQL Server native Client 11.0’ as the destination.

I did see a menu yesterday for ‘Convert’ and ‘On Error’ but today, I can’t get the Management Studio to provide those options.

I don’t think i want to ignore the truncation error, but it seems odd that I don’t have the same options today as i had yesterday. I’ve created new tables to see if it was a problem with using the same data file source and destination table, but that wasn’t
it.

Asking the vendor to change their delimiter is not an options as it is COTS.

Any help guidance, whatever that will help me import this data sanely will be quite appreciated.

Thank-You.

Hello guys,

The import from Flat File Source fails:

Error 0xc02020a1: Data Flow Task 1: Data conversion failed.

The data conversion for column «ArticleName» returned status value 4 and status text «Text was truncated or one or more characters had no match in the target code page.».

(SQL Server Import and Export Wizard)

I have changed the size of the column «ArticleName» (varchar) to max but the error comes up again.

The data i want to import came with multiple flat files. They all could import properly but this one is a problem.

Has someone a idea what i can try more?

I am trying to use the Import & Export Data Wizard to import the contents of a CSV file into a table in MSSQL.

I have no issues if I import all columns as strings however, I need one column to be a float. (In the CSV, column 4 is a currency amount with two decimals e.g. $200.30).

Whenever I set the value of column 4 to a float, I receive the following error during the import:

Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data
conversion for column «Column 4» returned status value 2 and status
text «The value could not be converted because of a potential loss of
data.». (SQL Server Import and Export Wizard)

Here is an example of the data which I am importing:

+----+------+----------+-----------+--------+
|  1 | 2014 | December | 400089323 | 8.03   |
|  2 | 2014 | December | 400319749 | 45.65  |
|  3 | 2014 | December | 400377067 | 38     |
|  4 | 2014 | December | 400524693 | 0      |
|  5 | 2014 | December | 400536070 | 125.31 |
|  6 | 2014 | December | 400663546 | 266.95 |
|  7 | 2014 | December | 400705907 | 218    |
|  8 | 2014 | December | 400763025 | 244.39 |
|  9 | 2014 | December | 400782510 | 12.89  |
| 10 | 2014 | December | 400794040 | 61.04  |
+----+------+----------+-----------+--------+

This is the datatype of column 4:

The rest of the columns are «numeric [DT_NUMERIC]» except column 2 which is «string [DT_STR]».

I have tried different datatypes for column 4 such as numeric & currency. This did not work.

FYI: I am using SQL Server 2012.