Содержание
- MSSQLSERVER_102
- Details
- Explanation
- User Action
- MSSQLSERVER_102
- Сведения
- Объяснение
- Действие пользователя
- Sql server error message 102
- Asked by:
- Question
- SQLSTATE 42000 (Error 102) Incorrect syntax near ‘)’
- SQLErudition.com
- Learning SQL Server
- Resolve Error: 102 while creating Full-Text Index Stoplist in SQL Server
- The Error, 102
- The Cause
- Changing the Compatibility Level
MSSQLSERVER_102
Applies to: SQL Server (all supported versions)
Details
| Attribute | Value |
|---|---|
| Product Name | SQL Server |
| Event ID | 102 |
| Event Source | MSSQLSERVER |
| Component | SQLEngine |
| Symbolic Name | P_SYNTAXERR2 |
| Message Text | Incorrect syntax near ‘%.*ls’. |
Explanation
Indicates a syntax error. Additional information is not available because the error prevents the Database Engine from processing the statement.
Can be caused by attempting to create a symmetric key using the deprecated RC4 or RC4_128 encryption, when not in 90 or 100 compatibility mode.
User Action
Search the Transact-SQL statement for syntax errors.
If creating a symmetric key using the RC4 or RC4_128, select a newer encryption such as one of the AES algorithms. (Recommended.) If you must use RC4, use ALTER DATABASE SET COMPATIBILITY_LEVEL to set the database to compatibility level 90 or 100. (Not recommended.)
Источник
MSSQLSERVER_102
Применимо к: SQL Server (все поддерживаемые версии)
Сведения
| attribute | Значение |
|---|---|
| Название продукта | SQL Server |
| Идентификатор события | 102 |
| Источник события | MSSQLSERVER |
| Компонент | SQLEngine |
| Символическое имя | P_SYNTAXERR2 |
| Текст сообщения | Неправильный синтаксис около «%.*ls». |
Объяснение
Указывает на синтаксическую ошибку. Дополнительная информация недоступна из-за того, что ошибка мешает компоненту Компонент Database Engine обработать инструкцию.
Может быть вызвана попыткой создать симметричный ключ с помощью устаревшего шифрования RC4 или RC4_128 при нахождении не в режимах совместимости 90 или 100.
Действие пользователя
Выполните поиск синтаксической ошибки в инструкции Transact-SQL.
При создании симметричного ключа с помощью RC4 или RC4_128 выберите более новое шифрование, например один из алгоритмов AES. (Рекомендуется.) Если необходимо использовать RC4, используйте ALTER DATABASE SET COMPATIBILITY_LEVEL, чтобы установить базу данных на уровень совместимости 90 или 100. (Не рекомендуется.)
Источник
Sql server error message 102
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Asked by:
Question
I am very new to T- SQL and I got below find blocking SPID script from one of the blog spot.I’m just testing it and tried to modify it on SQL 2008 R2 and SQL 2012 to get an alert when there is blocking between SPID lasts more than 120 seconds. Below is my modified script which I tried to filter it but getting below error.
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ‘>’.
Msg 102, Level 15, State 1, Line 70
Incorrect syntax near ‘>’.
— Checked for currenlty running queries by putting data in temp table
SELECT s.session_id
,r.STATUS
,r.blocking_session_id
,r.wait_type
,wait_resource
,r.wait_time / (1000.0) > 120.0 ‘WaitSec’
,r.cpu_time
,r.logical_reads
,r.reads
,r.writes
,r.total_elapsed_time / (1000.0) > 120 ‘ElapsSec’
,Substring(st.TEXT, (r.statement_start_offset / 2) + 1, (
(
CASE r.statement_end_offset
WHEN – 1
THEN Datalength(st.TEXT)
ELSE r.statement_end_offset
END – r.statement_start_offset
) / 2
) + 1) AS statement_text
,Coalesce(Quotename(Db_name(st.dbid)) + N’.’ + Quotename(Object_schema_name(st.objectid, st.dbid)) + N’.’ + Quotename(Object_name(st.objectid, st.dbid)), ”) AS command_text
,r.command
,s.login_name
,s.host_name
,s.program_name
,s.host_process_id
,s.last_request_end_time
,s.login_time
,r.open_transaction_count
INTO #temp_requests
FROM sys.dm_exec_sessions AS s
INNER JOIN sys.dm_exec_requests AS r ON r.session_id = s.session_id
CROSS APPLY sys.dm_exec_sql_text(r.sql_handle) AS st
WHERE r.session_id != @@SPID
ORDER BY r.cpu_time DESC
,r.STATUS
,r.blocking_session_id
,s.session_id
IF (
SELECT count(*)
FROM #temp_requests
WHERE blocking_session_id > 50
) 0
BEGIN
— blocking found, sent email.
DECLARE @tableHTML NVARCHAR(MAX);
Источник
SQLSTATE 42000 (Error 102) Incorrect syntax near ‘)’
General Setting
This is a weird question and I am sorry about that. I actually spent quite some time searching and analyzing our code. We have a job calling a stored procedure which selects some data and then calls other stored procedures (some which names are retrieved using the select-statements, since they might vary). It calls about 20 different of these stored procedures about 10’000 times (summed up the different calls), just varying the parameters. These stored procedures retrieve some data and then inserts the data into our databse.
Version of SQL-Server
This worked fine in Microsoft SQL-Server 2005, but since a little while we upgraded to SQL-Server 2012 (11.0.3000.0) and this problem seems to started occurring since then, or we simply were not aware of it before.
Error
So we get this error every time we execute it:
I know this is very little information, but our scripts are pretty big and I would like to ask what some of you would to to figure out the problem.
What I did so far
I looked at the scripts, did some dry runs (b/c the entire script runs for about an hour. (it’s a nightly job)). The dry runs worked fine. Also we hardly have opening brackets, and they always close. As soon as it retrieves data, after an hour of running it ‘crashes’ with this error.
- Dry runs (without actually loading the data but calling most of the stored procedures) — ok, success
- Called the main-store-procedure directly (not as job) — did not work either
- Read through the code searched for bracket-errors — ok, no bracket errors found
- Runned with different users: db-admin, my user — did not work either
- Search through Google/Stackoverflow/a littlbe bit through stackexchange in general
Questions
It looks like everything the script has to do, is done correctly and completely, so we do not understand why it does not return ‘success’ and throws this error message at us.
I could imagine that there might be a field it retrieves which contains an escape character. would that make sense?
Could I set like a universal breakpoint, that the execution of the script would break as soon as this ‘error’ occurs and show me what the data is causing this error. like debugging code in visual studio?
So my main question is: Could you please give me a hint/help how to approach this error in the best way? What I should do?
Job
MY_STOREDPROCEDURE_MAIN
spStartMyNightlyJob
After this it opens up to about 15 different stored procedures, depending which tasks are ‘defined’ every evening..
If I comment-out the actual execution of it
then it completes without error.
Thanks already for looking at my question 😉
Источник
SQLErudition.com
Learning SQL Server
Resolve Error: 102 while creating Full-Text Index Stoplist in SQL Server
One of my SQL Server databases was returning an error 102 while creating a full-text stoplist. We were trying to create a stoplist based on the system stoplist and later also tried to create a blank stoplist. The error happened both via SSMS, and equivalent TSQL commands.
In This Article
The Error, 102
The following TSQL gave the error –
The error dialog box –
Image 1 (click to enlarge)
The text in the error message –
The Cause
I looked at the MSDN page related to the TSQL command to check if I was using the right syntax.
REFERENCE:
- CREATE FULLTEXT STOPLIST (Transact-SQL)
https://msdn.microsoft.com/en-us/library/Cc280405(v=sql.105).aspx
My syntax was correct but there was something else on the page that looked relevant. Right at the top of the documentation page is the following message –
 Important |
|---|
| CREATE FULLTEXT STOPLIST, ALTER FULLTEXT STOPLIST, and DROP FULLTEXT STOPLIST are supported only under compatibility level 100. Under compatibility levels 80 and 90, these statements are not supported. However, under all compatibility levels the system stoplist is automatically associated with new full-text indexes. |
To verify if the compatibility level of my database could indeed be an issue, I checked the properties of the database by –
| is_fulltext_enabled | compatibility_level |
| 90 |
There you have it! My database was originally on a SQL Server 2005 installation so its compatibility level was 90, and that was the reason the CREATE/ALTER/DROP STOPLIST commands were unavailable. The current server that I was working on was SQL Server 2008 R2, which could be checked by –
So the resolution to the error lies in changing the compatibility level. As per the documentation, the highest compatibility level I could go on a SQL Server 2008 R2 installation was 100.
REFERENCE:
- View or Change the Compatibility Level of a Database
https://msdn.microsoft.com/en-us/subscriptions/index/bb933794 - ALTER DATABASE Compatibility Level (Transact-SQL)
https://msdn.microsoft.com/en-us/subscriptions/index/bb510680
Changing the Compatibility Level
I checked that no other users were connected to the database and then issued this command to change the compatibility level.
It ran successfully and I could verify in the sys.databases catalog view that the compatibility level has changed to 100.
Now I was able to create a Stop List, Full-text Catalog and a Full-text Index on my table, and was able to run queries using the CONTAINS and CONTAINSTABLE keywords.
Источник
I’m trying to run the following fairly simple query in SQL Server Management Studio:
SELECT TOP 1000 *
FROM
master.sys.procedures as procs
left join
master.sys.parameters as params on procs.object_id = params.object_id
This seems totally correct, but I keep getting the following error:
Msg 102, Level 15, State 1, Line 6
Incorrect syntax near ».
It works if I take out the join and only do a simple select:
SELECT TOP 1000 *
FROM
master.sys.procedures as procs
But I need the join to work. I don’t even have the string » in this query, so I can’t figure out what it doesn’t like.
halfer
19.7k17 gold badges95 silver badges183 bronze badges
asked Nov 1, 2013 at 15:57
Joshua FrankJoshua Frank
12.9k11 gold badges45 silver badges91 bronze badges
7
Such unexpected problems can appear when you copy the code from a web page or email and the text contains unprintable characters like individual CR or LF and non-breaking spaces.
halfer
19.7k17 gold badges95 silver badges183 bronze badges
answered Nov 4, 2013 at 8:15
4
Panagiotis Kanavos is right, sometimes copy and paste T-SQL can make appear unwanted characters…
I finally found a simple and fast way (only Notepad++ needed) to detect which character is wrong, without having to manually rewrite the whole statement: there is no need to save any file to disk.
It’s pretty quick, in Notepad++:
You should easily find the wrong character(s)
answered May 21, 2019 at 12:50
2
The error for me was that I read the SQL statement from a text file, and the text file was saved in the UTF-8 with BOM (byte order mark) format.
To solve this, I opened the file in Notepad++ and under Encoding, chose UTF-8. Alternatively you can remove the first three bytes of the file with a hex editor.
answered Sep 7, 2018 at 3:19
3
You can identify the encoding used for the file (in this case sql file) using an editor (I used Visual studio code). Once you open the file, it shows you the encoding of the file at the lower right corner on the editor.
encoding
I had this issue when I was trying to check-in a file that was encoded UTF-BOM (originating from a non-windows machine) that had special characters appended to individual string characters
You can change the encoding of your file as follows:
In the bottom bar of VSCode, you’ll see the label UTF-8 With BOM. Click it. A popup opens. Click Save with encoding. You can now pick a new encoding for that file (UTF-8)
answered Jan 15, 2021 at 18:32
I was using ADO.NET and was using SQL Command as:
string query =
"SELECT * " +
"FROM table_name" +
"Where id=@id";
the thing was i missed a whitespace at the end of "FROM table_name"+
So basically it said
string query = "SELECT * FROM table_nameWHERE id=@id";
and this was causing the error.
Hope it helps
answered Jun 7, 2019 at 3:39
IamButtmanIamButtman
1672 silver badges15 bronze badges
I got this error because I pasted alias columns into a DECLARE statement.
DECLARE @userdata TABLE(
f.TABLE_CATALOG nvarchar(100),
f.TABLE_NAME nvarchar(100),
f.COLUMN_NAME nvarchar(100),
p.COLUMN_NAME nvarchar(100)
)
SELECT * FROM @userdata
ERROR:
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ‘.’.
DECLARE @userdata TABLE(
f_TABLE_CATALOG nvarchar(100),
f_TABLE_NAME nvarchar(100),
f_COLUMN_NAME nvarchar(100),
p_COLUMN_NAME nvarchar(100)
)
SELECT * FROM @userdata
NO ERROR
answered Jul 2, 2019 at 13:35
For me I was miss single quote in the statement
Incorrect One : "INSERT INTO Customers (CustomerNo, FirstName, MobileNo1, RelatedPersonMobileNo) VALUES ('John123', John', '1111111111', '1111111111)"
missed quote in John’ and ‘1111111111
Correct One: "INSERT INTO Customers (CustomerNo, FirstName, MobileNo1, RelatedPersonMobileNo) VALUES ('John123', 'John', '1111111111', '1111111111')"
answered Feb 23, 2022 at 13:37
abdellaabdella
2982 silver badges9 bronze badges
I was able to run this by replacing the ‘Dot’; with and ‘Underscore’; for the [dbo][tablename].
EXAMPLE:
EXEC sp_columns INFORMATION_SCHEMA.COLUMNS
GO //**this will NOT work. But will intelliSence/autocomplete as if its correct.
EXEC sp_columns INFORMATION_SCHEMA_COLUMNS
GO //**This will run in Synapse. but funny enough will not autocomplete.
answered Aug 15, 2022 at 19:16
Hi All,
I am very new to T- SQL and I got below find blocking SPID script from one of the blog spot.I’m just testing it and tried to modify it on SQL 2008 R2 and SQL 2012 to get an alert when there is blocking between SPID lasts more than 120 seconds. Below
is my modified script which I tried to filter it but getting below error.
Please help..
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ‘>’.
Msg 102, Level 15, State 1, Line 70
Incorrect syntax near ‘>’.
SET NOCOUNT ON
— Checked for currenlty running queries by putting data in temp table
SELECT s.session_id
,r.STATUS
,r.blocking_session_id
,r.wait_type
,wait_resource
,r.wait_time / (1000.0) > 120.0 ‘WaitSec’
,r.cpu_time
,r.logical_reads
,r.reads
,r.writes
,r.total_elapsed_time / (1000.0) > 120 ‘ElapsSec’
,Substring(st.TEXT, (r.statement_start_offset / 2) + 1, (
(
CASE r.statement_end_offset
WHEN – 1
THEN Datalength(st.TEXT)
ELSE r.statement_end_offset
END – r.statement_start_offset
) / 2
) + 1) AS statement_text
,Coalesce(Quotename(Db_name(st.dbid)) + N’.’ + Quotename(Object_schema_name(st.objectid, st.dbid)) + N’.’ + Quotename(Object_name(st.objectid, st.dbid)), ”) AS command_text
,r.command
,s.login_name
,s.host_name
,s.program_name
,s.host_process_id
,s.last_request_end_time
,s.login_time
,r.open_transaction_count
INTO #temp_requests
FROM sys.dm_exec_sessions AS s
INNER JOIN sys.dm_exec_requests AS r ON r.session_id = s.session_id
CROSS APPLY sys.dm_exec_sql_text(r.sql_handle) AS st
WHERE r.session_id != @@SPID
ORDER BY r.cpu_time DESC
,r.STATUS
,r.blocking_session_id
,s.session_id
IF (
SELECT count(*)
FROM #temp_requests
WHERE blocking_session_id > 50
) 0
BEGIN
— blocking found, sent email.
DECLARE @tableHTML NVARCHAR(MAX);
SET @tableHTML = N’Blocking Report’ + N” + N” + N’session_id’ + N’Status’ +
N’blocking_session_idwait_typewait_resource’ +
N’WaitSec’ + N’cpu_time’ +
N’logical_reads’ + N’reads’ +
N’writes’ + N’ElapsSec’ + N’statement_text’ + N’command_text’ +
N’command’ + N’login_name’ + N’host_name’ + N’program_name’ +
N’host_process_id’ + N’last_request_end_time’ + N’login_time’ +
N’open_transaction_count’ + ” + CAST((
SELECT td = s.session_id
,”
,td = r.STATUS
,”
,td = r.blocking_session_id
,”
,td = r.wait_type
,”
,td = wait_resource
,”
,td = r.wait_time / (1000.0) > 120.0
,”
,td = r.cpu_time
,”
,td = r.logical_reads
,”
,td = r.reads
,”
,td = r.writes
,”
,td = r.total_elapsed_time / (1000.0) > 120.0
,”
,td = Substring(st.TEXT, (r.statement_start_offset / 2) + 1, (
(
CASE r.statement_end_offset
WHEN – 1
THEN Datalength(st.TEXT)
ELSE r.statement_end_offset
END – r.statement_start_offset
) / 2
) + 1)
,”
,td = Coalesce(Quotename(Db_name(st.dbid)) + N’.’ + Quotename(Object_schema_name(st.objectid, st.dbid)) +
N’.’ + Quotename(Object_name(st.objectid, st.dbid)), ”)
,”
,td = r.command
,”
,td = s.login_name
,”
,td = s.host_name
,”
,td = s.program_name
,”
,td = s.host_process_id
,”
,td = s.last_request_end_time
,”
,td = s.login_time
,”
,td = r.open_transaction_count
FROM sys.dm_exec_sessions AS s
INNER JOIN sys.dm_exec_requests AS r ON r.session_id = s.session_id
CROSS APPLY sys.dm_exec_sql_text(r.sql_handle) AS st
WHERE r.session_id != @@SPID
AND blocking_session_id > 0
ORDER BY r.cpu_time DESC
,r.STATUS
,r.blocking_session_id
,s.session_id
FOR XML PATH(‘tr’)
,TYPE
) AS NVARCHAR(MAX)) + N”;
EXEC msdb.dbo.sp_send_dbmail @body = @tableHTML
,@body_format = ‘HTML’
,@profile_name = N’SQLMail’
,@recipients = N’biradarsangamesh7@gmail.com’
,@Subject = N’Blocking Detected’
END
DROP TABLE #temp_requests
MSSQLSERVER_102
Применимо к: SQL Server (все поддерживаемые версии)
Сведения
| attribute | Значение |
|---|---|
| Название продукта | SQL Server |
| Идентификатор события | 102 |
| Источник события | MSSQLSERVER |
| Компонент | SQLEngine |
| Символическое имя | P_SYNTAXERR2 |
| Текст сообщения | Неправильный синтаксис около «%.*ls». |
Объяснение
Указывает на синтаксическую ошибку. Дополнительная информация недоступна из-за того, что ошибка мешает компоненту Компонент Database Engine обработать инструкцию.
Может быть вызвана попыткой создать симметричный ключ с помощью устаревшего шифрования RC4 или RC4_128 при нахождении не в режимах совместимости 90 или 100.
Действие пользователя
Выполните поиск синтаксической ошибки в инструкции Transact-SQL.
При создании симметричного ключа с помощью RC4 или RC4_128 выберите более новое шифрование, например один из алгоритмов AES. (Рекомендуется.) Если необходимо использовать RC4, используйте ALTER DATABASE SET COMPATIBILITY_LEVEL, чтобы установить базу данных на уровень совместимости 90 или 100. (Не рекомендуется.)
Источник
Error code 102 in sql
This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.
Asked by:
Question
I am very new to T- SQL and I got below find blocking SPID script from one of the blog spot.I’m just testing it and tried to modify it on SQL 2008 R2 and SQL 2012 to get an alert when there is blocking between SPID lasts more than 120 seconds. Below is my modified script which I tried to filter it but getting below error.
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ‘>’.
Msg 102, Level 15, State 1, Line 70
Incorrect syntax near ‘>’.
— Checked for currenlty running queries by putting data in temp table
SELECT s.session_id
,r.STATUS
,r.blocking_session_id
,r.wait_type
,wait_resource
,r.wait_time / (1000.0) > 120.0 ‘WaitSec’
,r.cpu_time
,r.logical_reads
,r.reads
,r.writes
,r.total_elapsed_time / (1000.0) > 120 ‘ElapsSec’
,Substring(st.TEXT, (r.statement_start_offset / 2) + 1, (
(
CASE r.statement_end_offset
WHEN – 1
THEN Datalength(st.TEXT)
ELSE r.statement_end_offset
END – r.statement_start_offset
) / 2
) + 1) AS statement_text
,Coalesce(Quotename(Db_name(st.dbid)) + N’.’ + Quotename(Object_schema_name(st.objectid, st.dbid)) + N’.’ + Quotename(Object_name(st.objectid, st.dbid)), ”) AS command_text
,r.command
,s.login_name
,s.host_name
,s.program_name
,s.host_process_id
,s.last_request_end_time
,s.login_time
,r.open_transaction_count
INTO #temp_requests
FROM sys.dm_exec_sessions AS s
INNER JOIN sys.dm_exec_requests AS r ON r.session_id = s.session_id
CROSS APPLY sys.dm_exec_sql_text(r.sql_handle) AS st
WHERE r.session_id != @@SPID
ORDER BY r.cpu_time DESC
,r.STATUS
,r.blocking_session_id
,s.session_id
IF (
SELECT count(*)
FROM #temp_requests
WHERE blocking_session_id > 50
) 0
BEGIN
— blocking found, sent email.
DECLARE @tableHTML NVARCHAR(MAX);
Источник
MSSQLSERVER_102
Applies to: SQL Server (all supported versions)
Details
| Attribute | Value |
|---|---|
| Product Name | SQL Server |
| Event ID | 102 |
| Event Source | MSSQLSERVER |
| Component | SQLEngine |
| Symbolic Name | P_SYNTAXERR2 |
| Message Text | Incorrect syntax near ‘%.*ls’. |
Explanation
Indicates a syntax error. Additional information is not available because the error prevents the Database Engine from processing the statement.
Can be caused by attempting to create a symmetric key using the deprecated RC4 or RC4_128 encryption, when not in 90 or 100 compatibility mode.
User Action
Search the Transact-SQL statement for syntax errors.
If creating a symmetric key using the RC4 or RC4_128, select a newer encryption such as one of the AES algorithms. (Recommended.) If you must use RC4, use ALTER DATABASE SET COMPATIBILITY_LEVEL to set the database to compatibility level 90 or 100. (Not recommended.)
Источник
SQLErudition.com
Learning SQL Server
Resolve Error: 102 while creating Full-Text Index Stoplist in SQL Server
One of my SQL Server databases was returning an error 102 while creating a full-text stoplist. We were trying to create a stoplist based on the system stoplist and later also tried to create a blank stoplist. The error happened both via SSMS, and equivalent TSQL commands.
In This Article
The Error, 102
The following TSQL gave the error –
The error dialog box –
Image 1 (click to enlarge)
The text in the error message –
The Cause
I looked at the MSDN page related to the TSQL command to check if I was using the right syntax.
REFERENCE:
- CREATE FULLTEXT STOPLIST (Transact-SQL)
https://msdn.microsoft.com/en-us/library/Cc280405(v=sql.105).aspx
My syntax was correct but there was something else on the page that looked relevant. Right at the top of the documentation page is the following message –
| Important |
|---|
| CREATE FULLTEXT STOPLIST, ALTER FULLTEXT STOPLIST, and DROP FULLTEXT STOPLIST are supported only under compatibility level 100. Under compatibility levels 80 and 90, these statements are not supported. However, under all compatibility levels the system stoplist is automatically associated with new full-text indexes. |
To verify if the compatibility level of my database could indeed be an issue, I checked the properties of the database by –
| is_fulltext_enabled | compatibility_level |
| 90 |
There you have it! My database was originally on a SQL Server 2005 installation so its compatibility level was 90, and that was the reason the CREATE/ALTER/DROP STOPLIST commands were unavailable. The current server that I was working on was SQL Server 2008 R2, which could be checked by –
So the resolution to the error lies in changing the compatibility level. As per the documentation, the highest compatibility level I could go on a SQL Server 2008 R2 installation was 100.
REFERENCE:
- View or Change the Compatibility Level of a Database
https://msdn.microsoft.com/en-us/subscriptions/index/bb933794 - ALTER DATABASE Compatibility Level (Transact-SQL)
https://msdn.microsoft.com/en-us/subscriptions/index/bb510680
Changing the Compatibility Level
I checked that no other users were connected to the database and then issued this command to change the compatibility level.
It ran successfully and I could verify in the sys.databases catalog view that the compatibility level has changed to 100.
Now I was able to create a Stop List, Full-text Catalog and a Full-text Index on my table, and was able to run queries using the CONTAINS and CONTAINSTABLE keywords.
Источник
DBeaver reports SQL Error [102] [S0001]: Incorrect syntax near ‘,’. on correct SQL #5805
Comments
rafael-yure commented Apr 25, 2019 •
System information:
- Operating system (distribution) and version
Windows 10 1809 Build 17763.437 - DBeaver version
6.0.3 - Java version
1.8.0_191 - Additional extensions
None
Connection specification:
- Database name and version
SQL Server
Microsoft SQL Sever 12.00.1400 (Azure) - Driver name
Microsoft JDBC Driver 7.0 for SQL Server 7.0.0.0 - Do you use tunnels or proxies (SSH, SOCKS, etc)?
No.
Describe the problem you’re observing:
While trying to execute a valid SQL with a table alias, I get the SQL Error [102] [S0001]: Incorrect syntax near ‘,’. error:
Steps to reproduce, if exist:
Simply try to execute a SQL like this:
select c.column1, c.column2 from dbo.table c where c.column = 1 and c.colum3 = YVALUE and anotherValue is not null;
This returns the error. The error only occurs if you don’t select the whole line to run the query. If you select it, the query runs normally, proving that there is nothing wrong with the query itself.
This bug started with the release of the 6.0 version.
Include any warning/errors/backtraces from the logs
!ENTRY org.jkiss.dbeaver.model 4 0 2019-04-25 20:54:41.117 !MESSAGE Error executing query !SUBENTRY 1 org.jkiss.dbeaver.model 4 0 2019-04-25 20:54:41.118 !MESSAGE SQL Error [102] [S0001]: Incorrect syntax near ‘,’. !SUBENTRY 2 org.jkiss.dbeaver.model 4 0 2019-04-25 20:54:41.118 !MESSAGE Incorrect syntax near ‘,’. !STACK 0 com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ‘,’. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:254) at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(SQLServerStatement.java:1608) at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(SQLServerStatement.java:859) at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(SQLServerStatement.java:759) at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:7240) at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:2869) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:243) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:218) at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(SQLServerStatement.java:739) at org.jkiss.dbeaver.model.impl.jdbc.exec.JDBCStatementImpl.execute(JDBCStatementImpl.java:338) at org.jkiss.dbeaver.model.impl.jdbc.exec.JDBCStatementImpl.executeStatement(JDBCStatementImpl.java:131) at org.jkiss.dbeaver.ui.editors.sql.execute.SQLQueryJob.executeStatement(SQLQueryJob.java:467) at org.jkiss.dbeaver.ui.editors.sql.execute.SQLQueryJob.lambda$0(SQLQueryJob.java:407) at org.jkiss.dbeaver.model.DBUtils.tryExecuteRecover(DBUtils.java:1684) at org.jkiss.dbeaver.ui.editors.sql.execute.SQLQueryJob.executeSingleQuery(SQLQueryJob.java:405) at org.jkiss.dbeaver.ui.editors.sql.execute.SQLQueryJob.extractData(SQLQueryJob.java:849) at org.jkiss.dbeaver.ui.editors.sql.SQLEditor$QueryResultsContainer.readData(SQLEditor.java:2720) at org.jkiss.dbeaver.ui.controls.resultset.ResultSetJobDataRead.lambda$0(ResultSetJobDataRead.java:102) at org.jkiss.dbeaver.model.DBUtils.tryExecuteRecover(DBUtils.java:1684) at org.jkiss.dbeaver.ui.controls.resultset.ResultSetJobDataRead.run(ResultSetJobDataRead.java:100) at org.jkiss.dbeaver.model.runtime.AbstractJob.run(AbstractJob.java:102) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:63)
The text was updated successfully, but these errors were encountered:
Источник
Ошибка Microsoft SQL Server: SQL SERVER-Msg 102, Уровень 15, состояние 1, строка 2 неправильный синтаксис рядом‘) ‘ или msg 102 уровень 15 состояние 1 строка 3 Неправильный синтаксис рядом ‘ ‘
Описание ошибки:
Это сообщение об ошибке возникает, если мы используем функцию GETDATE() like в качестве параметра хранимой процедуры или оператора функции. или вторая ошибка относится к проблеме, когда вставка данных может быть решена, сделав столбец не нулевым, а также может быть сделана по умолчанию для некоторого значения.
Фактическое сообщение об ошибке:
Msg 102, Level 15, State 1, Line 2 Incorrect syntax near ‘)’.’
Решение:
Эта проблема может быть решена с помощью локальной переменной для хранения значения Getdate() вместо передачи функции GETDATE() в качестве параметра непосредственно в операторе execute, а затем передать назначенную локальную переменную в качестве параметра.
или другое сообщение об ошибке подобное приведено ниже
Еще одно сообщение об ошибке:
msg 102 level 15 state 1 line 3 incorrect syntax near ' '
Решение:
Эту проблему при вставке данных можно решить, сделав столбец не нулевым, а также можно сделать значение по умолчанию некоторым значением.
alter table tablename
add default 0 for person_id
или
alter table TableName
Alter Column ColumnName NOT NULL SET DEFAULT 0
Пожалуйста, обратите внимание, что alter column может потребоваться удалить столбец и создать его заново, что не есть хорошо, когда таблица очень большого размера.
In this user guide, we will learn about some of the possible causes that can cause the database error code 102, and then we will suggest some possible fixes that you can try to fix the problem.
Recommended
Speed up your PC today with this easy-to-use download.
g.This error occurs whenever you are using Adaptive Server IBM Power Systems RS / 6000, eServer p5, and i5 and are running Power3 or higher processors – AIX 6.1 TL 8 SP2 or higher. Supports TCP. I / O Completion Port API – Must remain installed and available on your computer to run SAP ASE. https://infocenter.sybase.com ›html document› jon1256241632272 System Requirements – Sybase Infocenter – SAP encounters a syntax error in a Transact-SQL ® command or query. This error can occur in the following cases: The keyword is often misspelled. You used a variable to get the name of the database and your request contained a parser error. Error 102 is incremented because the package was never executed.
This error occurs when Adaptive Server encounters a syntax error as part of a command or Transact-SQL ® problem. This error can occur if: The keyword is misspelled. You tried a variable in the database list and your query contains the latest parser error; Error 102 occurs simply because the package has never been executed.
This error occurs when Adaptive Server encounters a syntax error in a huge Transact-SQL ® command or query. This error can occur if: The e-commerce software is misspelled. You have used the appropriate variable for the database name when your request contains a parser error; Error 102 is thrown because part of the package has never been executed.
Details
| attribute | value |
|---|---|
| Product name | SQL Server |
| Event ID | 102 |
| Event Source | MSSQLSERVER |
| component | SQL Engine |
| Symbolic name | P_SYNTAXERR2 |
| Message text | Incorrect syntax near ‘%. * ls’. |
Explanation
What is MSG 102 SQL server?
The error “Incorrect syntax next to …” is displayed when the character is missing.
Indicates a format error. Additional information is available if the error is not considered to be preventing the Database Engine from processing the statement.
May be caused by a simple attempt to create a symmetric key with legacy encryption RC4 to RC4_128, if not using compatibility mode 3 or 100.
Action To Create Users
What is incorrect syntax near in SQL?
When parsing is done in SQL and the editor returns this error: Incorrect syntax in the vicinity of … ”. This usually means that you did indeed use the wrong syntax for your request. This mainly happens when a loved oneThe century has moved from one relational database to another relational database, for example, from MySQL to MS SQL Server.
If the symmetric key uses RC4 or RC4_128, select the newer security , for example one of the AES algorithms. (Recommended.) If you plan to use RC4, use ALTER DATABASE SET COMPATIBILITY_LEVEL to set the database compatibility level to 90 or 100 (not recommended).
- 2 seconds to read.
Strange question, I’m sorry. In fact, I’ve spent quite a bit of time doing specific research and analysis of our code. We have a job that calls a stored procedure that selects some data and then defines other stored procedures (some and names are derived using their select statements, as they may be different). It calls about 20 different of these routines 10,000 times (cumulative across different calls) and only changes my settings. These stored procedures retrieve certain information and then put it into our database.
What is MSG 102 SQL server?
The error “Invalid syntax near …” is searched for when searching for a character.
This issue worked as part of Microsoft SQL Server 2005, but since we upgraded to SQL Server 2012 (11.0.3000. AND 0), this problem seems to have occurred since then, or even we were not aware of this before.
Executed from and Username: #DATABASEUSER_RMV_FOR_STACKOVERFLOW. Incorrect syntax next to ")".[SQLSTATE 42000] (Error 102) Invalid syntax in ')'.[SQLSTATE 42000] (Error 102) Incorrect syntax near ")".[SQLSTATE 42000] (Error 102) The syntax for the nearest ")" is invalid.[SQLSTATE 42000] (Error 102) Incorrect syntax near ")".[SQLSTATE 42000] (Error 102) Incorrect syntax, near ")".[SQLSTATE 42000] (Error 102) Incorrect syntax near ")".[SQLSTATE 42000] (Error 102) Incorrect syntax near ")".[SQLSTATE 42000] (Error 102) Incorrect syntax near ")".[SQLSTATE 42000] (Error 102) Incorrect syntax, near ")".[SQLSTATE 42000] (Error 102). The step failed.
I know this is a minimum of information, but our scripts can be big and pretty, and I would also like to ask what some of you can do to solve most of the problems.
Recommended
Is your PC running slow? Do you have problems starting up Windows? Don’t despair! ASR Pro is the solution for you. This powerful and easy-to-use tool will diagnose and repair your PC, increasing system performance, optimizing memory, and improving security in the process. So don’t wait — download ASR Pro today!
I checked the website programs, several tries (b / c full script runs pretty much for HR … (this is a night job)). The dehydrated lanes worked well. Plus, we never have hooks that open and they close. As soon as the next one receives data, an hour later occurst crashing with this error …
- Dry continues to run (without actually loading reports, but calling most of the supported procedures) – Success.
- Called normally, some basic store procedures directly (not as a task) – completed, also do not work.
- Read a computer that was checked for support errors – ok, no support errors were found.
- Performed by different people: db-admin, my user – probably didn’t work either
- Search through Google / Stackoverflow / small contact on Stackexchange in general.
It looks like everything that should be in the script is working correctly and completely. Well, we don’t understand why all of this doesn’t return “Success” and doesn’t trigger this error message for us.
What is meant by Sqlstate 42000 error 50000?
If customers receive the following error message, they might see the sa password for the SQL server, and the history server might be wrong: The Eventbcp table could not be dumped to bcp. [SQLSTATE 42000] (error 50000).
I suppose there is a extracted range with a nice escape character … would that be necessary?
Can I set a simple breakpoint to stop this script as soon as this “error” occurs and show us what data is causing the article error … for example, debugging code only in Studio?
So my main question is vivisual: could you give me great advice / help on how best to fix this error? What should I do ?
What is fatal error in SQL server?
The reference to the SQL server cannot be deleted or can no longer be used. This approach error can have various reasons. The most common causes were Microsoft Dynamics NAV Server stopped or the connection to SQL Server was incorrectly configured.
EXEC MY_SCHEME.dbo.MY_STOREDPROCEDURE_MAIN
INSTALL NOCOUNT;- Appendix to the invoicing procedure hereDECLARE @userId INTDECLARE @fullHistory BITSELECT @userId = userIdFROM MON_SCHEME.dbo.USERSWHERE Username = 'SOME_NAME'SET @fullHistory = 0RUN MY_SCHEME.dbo.spStartMyNightlyJob @ userId = @ userId, @ processFullHistory = @ fullHistory
PROCEDURE
[dbo]. [spStartMyNightlyJob] @userId INT, @processFullHistory BITAS? 'OR' WHATBEGIN INSTALL ACCOUNT DECLARE @logReport VARCHAR (255) SET @logReport = 'NightlyJob' INSERT INTO TEMP_LOGREPORT (text, VALUES ('====================================== = = ================================================ == = ======== ', report) @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('NightlyJob started in woul + CAST (GETDATE () AS VARCHAR), @logReport) INSERT INTO TEMP_LOGREPORT (text, VALUES ('====================================== = = ================================================ == = ======== ', report) @logReport) DECLARE taskCursor CURSOR LOCAL FAST_FORWARD READ_ONLY FOR CHOOSE r.taskId, link.Id, i.Description, link.externalId, rdef.name, rdir.fromDB, rdir.toDB, rdef.procedureName, rfs.fillStrategyId, rp.parameterId FROM MA_TACHE r LEFT OUTER JOIN link some_table_1 B Л r.LinkId = link.LinkId LEFT OUTER SEAL some_table_2 i ON link.Id = i.Id LEFT OUTER JOIN some_table_3_TASK_DEFINITION rdef ON r.taskDefinitionId equals rdef.taskDefinitionId OUTSIDE LEFT Subscribe to some_table_4_TASK_DIRECTION rdir ON rdef.directionId implies rdir.directionId LEFT OUTER JOIN some_table_5_FILL_STRATEGY rfs ON rdef.fillStrategyId = rfs.fillStrategyId LEFT OUTER SEAL some_table_6_PARAMETER rp ON rdef.parameterId = rp.parameterId O r.active = 1 And rdef.taskDefinitionId DON'T LIKE 17 DECLARE @taskId INT DECLARE @someOtherId INT DECLARE @someOtherName VARCHAR (255) DECLARE @externalSomeOtherId INT DECLARE @taskName VARCHAR (50) DECLARE @fromDB VARCHAR (50) DECLARE @toDB VARCHAR (50) DECLARE @storedProcedure VARCHAR (100) DECLARE @fillStrategyId INT DECLARE @parameterId INT OPEN Cursor task GET NEXT FROM taskCursor V @taskId, @someOtherId or @someOtherName, @externalSomeOtherId, @taskName, @fromDB, @storedProcedure, @todb, @fillStrategyId, @parameterId WHILE @@ FETCH_STATUS = 0 START INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('--------------------------------------- - ------------------------------------------------ - -------------- ', @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('Task in progress: lol + @taskName, @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('Night work between: woul + @fromDB +' -> a + @toDB, @logReport)INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('Execution procedure: ha + @storedProcedure, @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('Involved: no + @someOtherName +' ('+ CAST (@someOtherId AS VARCHAR) +') ', @logReport) START @storedProcedure @someOtherId - @externalSomeOtherId, @fillStrategyId, @parameterId, @userId, @processFullHistory INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('', @logReport) SET @taskId = NULL SET @someOtherId = NULL SET @someOtherName = NULL SET @externalSomeOtherId = NULL SET @taskName = NULL SET @fromDB is NULL SET @toDB = NULL SET @storedProcedure = NULL SET @fillStrategyId = NULL SET @parameterId = NULL GET NEXT FROM taskCursor V @taskId, @taskId, @someOtherName, @externalSomeOtherId, @taskName, @fromDB, @storedProcedure, @todb, @fillStrategyId, @parameterId END CLOSE task cursor DEALLOCATE Cursor task INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('===================================== = ================================================= = = =========== ', @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('NightlyJob finished in' + CAST (GETDATE () AS VARCHAR), @logReport) INSERT INTO TEMP_LOGREPORT (text, report) VALUES ('===================================== = ================================================= = = =========== ', @logReport) RETURN 0END
After this uniqueness, it opens for about 15 different stored procedures, depending on which actions are “set” each night.
EXECUTE @storedProcedure @someOtherId @externalSomeOtherId, @fillStrategyId, @parameterId, @userId, @processFullHistory
Speed up your PC today with this easy-to-use download.
What is incorrect syntax near in SQL?
When you run a query next to SQL and the editor ignores this error: Wrong syntax just for … ” This usually means that you arewere taking the wrong syntax for the problem. This mainly happens when someone switches from one relational database to another, for example from MySQL to MS SQL Server.
What is meant by Sqlstate 42000 error 50000?
If you receive the following error, the SA private data for SQL Server or Historical Server might be incorrect: Unable for bcp eventbcp table out. [SQLSTATE 42000] (error 50000).
What is fatal error in SQL server?
The connection to the SQL server could not be established or it can no longer be used. There are probably several reasons for this error. The most common causes are Microsoft Dynamics NAV Server is stopped or the connection to SQL Server is incorrectly configured.
What is the event ID of SQL Server 102?
SQL server. Event identifier. 102. The source of the event. MSSQLSERVER. Compilation. SQL engine. Symbolic name. P_SYNTAXERR2.