Error 1168 element not found

  • Remove From My Forums

locked

SOLVED: Writing RPi2 image to SD Card: dism Error: 1168 — cannot find element

  • Question

  • Hello all,

    I have installed Windows 10 build 10074 (Dutch language) on a PC, no VM.

    I have downloaded and extracted Windows_IoT_Core_RPI2_BUILD.zip

    One of the files extracted is Flash.ffu

    I have established that my SD card is a class 10 and 16 GB

    I open an Administrator command prompt.

    I have established the SD card is seen as «Disk 1» 14 GB size

    I change directory to the directory containing Flash.ffu

    I execute the command:  «dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\.PhysicalDrive1 /SkipPlatformCheck»

    I receive follwing error:

    Deployment Image Servicing and Management tool
    Version: 10.0.10074.0

    Kan element niet vinden.

    The DISM log file can be found at C:WindowsLogsDISMdism.log

    > «Kan element niet vinden» translates as : «Cannot find element»

    I notice a difference in filename between the extracted «Flash.ffu» and the «flash.ffu» (capital F) so I retry the command as:

    «dism.exe /Apply-Image /ImageFile:Flash.ffu /ApplyDrive:\.PhysicalDrive1 /SkipPlatformCheck»

    but with same error 1168

    The DISM log entry follows below.

    Anyone encountering the same issue, and better still, have found a solution?

    Many thanks!

    Ralph

    DISM log file entry:

    2015-05-02 13:36:06, Info                  DISM   PID=4348 TID=4092 Scratch directory set to ‘C:UsersralphAppDataLocalTemp’. — CDISMManager::put_ScratchDir
    2015-05-02 13:36:06, Info                  DISM   PID=4348 TID=4092 DismCore.dll version: 10.0.10074.0 — CDISMManager::FinalConstruct
    2015-05-02 13:36:06, Info                  DISM   PID=4348 TID=4092 Successfully loaded the ImageSession at «C:WindowsSystem32Dism» — CDISMManager::LoadLocalImageSession
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Found and Initialized the DISM Logger. — CDISMProviderStore::Internal_InitializeLogger
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Failed to get and initialize the PE Provider.  Continuing by assuming
    that it is not a WinPE image. — CDISMProviderStore::Final_OnConnect
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Finished initializing the Provider Map. — CDISMProviderStore::Final_OnConnect
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger — CDISMProviderStore::GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized.  Returning the existing instance.
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger — CDISMProviderStore::GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized.  Returning the existing instance.
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Manager: PID=4348 TID=4092 Successfully created the local image session and provider store. — CDISMManager::CreateLocalImageSession
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger — CDISMProviderStore::GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized.  Returning the existing instance.
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE:

    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: <—— Starting Dism.exe session ——>
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE:

    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Host machine information: OS Version=10.0.10074, Running architecture=amd64, Number of processors=2
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Dism.exe version: 10.0.10074.0
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Executing command line: dism.exe  /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\.PhysicalDrive1
    /SkipPlatformCheck
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting the collection of providers from a local provider store type. — CDISMProviderStore::GetProviderCollection
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismFolderProvider.dll
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismFolderProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismWimProvider.dll —
    CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismWimProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismVHDProvider.dll —
    CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismVHDProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismImagingProvider.dll
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismImagingProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismCompatProvider.dll
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismCompatProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered.  Attempting to initialize
    the provider. — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:WindowsSystem32DismFfuProvider.dll —
    CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:WindowsSystem32DismFfuProvider.dll.
    — CDISMProviderStore::Internal_LoadProvider
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: WimManager.
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: VHDManager
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FfuManager
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting Provider GenericImagingManager — CDISMProviderStore::GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized.  Returning the existing instance.
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Getting Provider FfuManager — CDISMProviderStore::GetProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized.  Returning the existing instance.
    — CDISMProviderStore::Internal_GetProvider
    2015-05-02 13:36:06, Error                 DISM   DISM Imaging Provider: PID=4348 TID=4092 basentsetupopktoolsdismprovidersimagingproviderdllgenericimagingmanager.cpp:2546
    — CGenericImagingManager::InternalCmdFFUApply(hr:0x80070490)
    2015-05-02 13:36:06, Error                 DISM   DISM Imaging Provider: PID=4348 TID=4092 basentsetupopktoolsdismprovidersimagingproviderdllgenericimagingmanager.cpp:535
    — CGenericImagingManager::ExecuteCmdLine(hr:0x80070490)
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE:

    2015-05-02 13:36:06, Info                  DISM   DISM.EXE: <—— Ending Dism.exe session ——>
    2015-05-02 13:36:06, Info                  DISM   DISM.EXE:

    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Found the OSServices.  Waiting to finalize it until all other providers
    are unloaded. — CDISMProviderStore::Final_OnDisconnect
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: FolderManager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: WimManager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: VHDManager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: GenericImagingManager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: Compatibility Manager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: FfuManager — CDISMProviderStore::Internal_DisconnectProvider
    2015-05-02 13:36:06, Info                  DISM   DISM Provider Store: PID=4348 TID=4092 Releasing the local reference to DISMLogger.  Stop logging. — CDISMProviderStore::Internal_DisconnectProvider

    • Edited by

      Thursday, May 14, 2015 6:16 PM

Answers

  • According to my research FfuProvider.dll checks this values and fails if one of them is empty.
    This is the only reason why dism fails with 1168 error on a Hyper-V virtual machine.

    You can patch x86 version of FfuProvider.dll with HEX editor.
    File offset 0x7312, replace B8 90 04 07 80 with B8 00 00 00 00 (valid for 10074 and 10075)

    Be sure you are patch and use an appropriate version of x86 dism:

    10074
    C:windowsSysWOW64Dism.exe
    C:windowsSysWOW64dismFfuProvider.dll
    To replace this file you have to become his owner and modify access rights.

    10075
    C:Program Files (x86)Windows Kits10Assessment and Deployment KitDeployment Toolsx86DISMdism.exe
    C:Program Files (x86)Windows Kits10Assessment and Deployment KitDeployment Toolsx86DISMffuprovider.dll

    Paths is for x64 windows system.

    Be careful: dism can rewrite any drive, including the system drive of running system if you specify its number in \.PhysicalDriveN

    • Edited by
      komarov.biz
      Thursday, May 14, 2015 9:20 AM
    • Marked as answer by
      PA1RB
      Thursday, May 14, 2015 6:14 PM

  • I’m very sorry to hear that you are still experiencing this issue.  Please know that we are looking into it and hope to have a solution or work-around available for you soon.

    The only other suggestion I can think of at the moment is if you could borrow a friends laptop that has a SD card reader built in you might get better results that way.

    Jonathan Tanner | Microsoft | Windows 10 IoT Core Insider Preview Support | This posting is provided ‘as is’ with no warranties and confers no rights.

    • Marked as answer by
      PA1RB
      Saturday, May 9, 2015 9:04 AM

  • OK, today I copied the Flash.ffu file to a Surface PRO 3 running Windows 10 build 10074.

    I have succesfully flashed two SD cards (SanDisk Ultra microSDHC UHS-1 cards with 8 GB, class 10) with the dism.exe on that Surface (dism version 10.0.10074.0).

    The first card I flashed using the build-in micro SD-card reader of the Surface. The second card I flashed using the exact same USB cardreader that does not work on my other computer (recognized by wmic as ChipBank SD/MM Reader USB Device).

    So the USB reader works on the Surface, but does not work on my other computer.

    The Windows 10 builds are both 10074, but the Surface runs the English language, the other computer runs the Dutch language.

    The computer on which the USB stick does not work is based on an ASUS P5LD2-VM motherboard (using the build in USB ports).

    So I will be off playing with the RPI-2 this weekend, but I will keep an eye out for the solution to the issue in this forum.

    Happy to provide more details if required by the engineers!

    • Proposed as answer by
      Jonathan TannerMicrosoft employee
      Friday, May 8, 2015 11:54 PM
    • Edited by
      PA1RB
      Saturday, May 9, 2015 9:02 AM
    • Marked as answer by
      PA1RB
      Saturday, May 9, 2015 9:04 AM

  • Hi,

    I had a similar problem with the above mentioned error. I tested all recomended methods/solutions with two USB card readers and three SD cards (class 10) but with no success. Now I installed Windows on the laptop that has SD card reader built
    in, as recomended above, and it works fine. Thanks for the tip!

    • Marked as answer by
      PA1RB
      Saturday, May 9, 2015 9:04 AM

  • Hello MiPiGamer,

    The page with instructions is here: http://ms-iot.github.io/content/win10/SetupRPI.htm

    The package including the image can be downloaded in step 3:
    Download the package «Windows 10 IoT Core Insider Preview Image for Raspberry Pi 2» from Microsoft Connect (you must be signed in to Microsoft Connect).

    Aside from the issue above writing the image, all went according to the description, and «Blinky» made the LED blink!

    • Marked as answer by
      PA1RB
      Sunday, May 10, 2015 8:49 PM

  • Wow — that did the trick allright:

    Deployment Image Servicing and Management tool
    Version: 10.0.10074.0

    Applying image
    [==========================100.0%==========================]
    The operation completed successfully.

    I confirm this patch absolutely fixed the issue, well done and many thanks indeed !!!

    Hope this finds its way into the next release of Windows 10.

    Ralph

    • Marked as answer by
      PA1RB
      Thursday, May 14, 2015 6:14 PM

Источник

Have you ever tried to use your VPN app only to be slapped by an error message saying error 1168 element not found? It is not only annoying but frustrating.

As an avid VPN user, it is normal to encounter one of these errors because VPNs are not as fail-proof as one might think.

But you are in the right place if you have experienced this error, so read till the end to know how to clear VPN error 1168 element not found for good.

What is the element not found error?

The element not found error is usually a network connection problem that appears on Windows versions 7 and 8.

Oftentimes, this error message pops up when launching your VPN app.

However, it can also happen with apps like File Explorer, Microsoft Edge, Command Prompt, or even the Settings app in Windows.

It usually appears either as a result of a bad Windows update, corrupt drivers, or interference from third-party applications.

Below are some fixes you can try:

  1. Install pending Windows updates
  2. Reload Explorer.exe
  3. Uninstall any recently installed apps
  4. Run the DSM tool
  5. Reset your PC
  6. Use a modern VPN

1. Install pending updates

This error may occur if one of your computer’s software components is outdated.

Therefore, ensure that you update your software to the latest version. Follow the steps below to achieve this:

  1. Open Windows settings.
  2. Click Update and Security.

vpn error 1168 element not found

  1. Click Check for updates.

windows updates

Your PC will search the internet for any relevant updates. Click the Update button to download and install any available updates.

2. Reload Explorer.exe

If you get the element not found error whenever you start up your VPN, you may need to reload your File Explorer. Here is how to do that:

  1. Press the Ctrl + Shift + Esc keys on your keyboard to launch the Task Manager.
  2. Click on the Details tab.
  3. Right-click Explorer.exe and select End Task. This will close all Windows Explorer processes so you can reload it.

task manager

  1. Click on File and select Create new task.

run new task

  1. Type explorer.exe into the text box.

refresh windows explorer

  1. Tick the Create this task with administrative privileges box and click OK.

Doing this refreshes your computer so that the Windows Explorer process can start afresh.

3. Uninstall any recently installed apps

If you started getting the error message after installing an app, then it’s only logical to uninstall it and check if it fixes the issue.

This is because the new app may have installed a driver that doesn’t support the VPN application. This has worked in many cases, so you should try it if you have any recently installed apps.

To uninstall apps on your computer, follow these steps:

  1. Press the Windows + R keys on your keyboard.
  2. Type Control Panel and press Enter to launch the Control Panel.

run dontrol panel

  1. Click on Programs.

programs

  1. Click on Uninstall a program.

uninstall

  1. Search for the recently installed app, right-click on it, and click Uninstall.

uninstall adobe air

Now check to see if your VPN works properly.

Alternatively, some windows updates can cause this error to happen. Therefore, you may need to uninstall recent updates. The process is similar to the one above. However, instead of clicking on Uninstall a program,

  1. Click on View installed updates.

view installed updates

  1. Then right-click on the affected updates and click Uninstall.

uninstall updates

Check back to see if the error message is now clear.

4. Run the DISM tool

Running the Deployment Image Servicing and Management tool is another fix for the element not found error.

The purpose of the tool is to scan your PC for problems that can lead to errors and repair them for you.

To run this tool:

  1. Search for Command Prompt from your Start Menu.
  2. Right-click on its icon and select Run as administrator. After this, a black rectangular window will pop up, asking for a command.

    command prompt

  3. Type in the following command: DISM.exe /Online /Cleanup-image /Scanhealth and press the Enter key.

    cmd

  4. After the scan is complete, type this second command: DISM.exe /Online /Cleanup-image /Restorehealth and press Enter to run it.

    cmd

This fix requires a little bit of patience if there are serious or multiple issues with your configuration.

The good news is that it can get rid of a lot of errors and there’s not a lot of work on your end, you just have to make sure you enter the correct commands.

5. Reset Your PC

Resetting your PC should be the last fix to try if you have tried fixes 1- 4 and none worked. Although intense, performing a full reset on your PC is definitely going to clear this error from your computer.

Follow these steps to reset your PC:

  1. Open Computer Settings and click Update and Security.
  2. Click Recovery.
  3. Then click on Get Started below the Reset PC menu.

  1. Select an option from the menu that appears and follow the instructions to reset your PC.

Resetting your PC returns the Windows OS to its original condition – as it was when you first installed it without all the installed programs so it is important to back up your personal files.

6. Use a modern VPN

This element not found error is most pronounced on VPNs with old tunneling protocols, especially L2TP and PPTP.

Therefore, switching to a provider with modern protocols such as OpenVPN and Wireguard is a sure way to fix the issue permanently.

If you want an error-free experience and very fast connections, consider ExpressVPN.

The tool is frequently updated to avoid errors. On top of that, as you can see in the screenshot, it gives you the possibility to pick from multiple VPN protocols.

We must also mention that the VPN has a large network of 3000+ servers located in 94 countries. This is great for anyone who uses VPNs for a better connection or to bypass geo-blocking.

ExpressVPN

ExpressVPN

Use this up-to-date VPN to prevent any errors and enjoy all the benefits of private browsing!

Conclusion

We tested all the fixes in this article. Therefore, we hope that one of them works for you and helps you get rid of the VPN error 1168 element not found on your PC.

Источник

by Teodor Nechita

Eager to help those in need, Teodor writes articles daily on subjects regarding Windows, Xbox, and all things tech-related. When not working, you may usually find him either… read more


Updated on December 14, 2021

XINSTALL BY CLICKING THE DOWNLOAD FILE

To fix various PC problems, we recommend DriverFix:
This software will keep your drivers up and running, thus keeping you safe from common computer errors and hardware failure. Check all your drivers now in 3 easy steps:

  1. Download DriverFix (verified download file).
  2. Click Start Scan to find all problematic drivers.
  3. Click Update Drivers to get new versions and avoid system malfunctionings.
  • DriverFix has been downloaded by 0 readers this month.

Several users have been reporting on the official Microsoft forums that they are having issues with the XPS printer:

I was unable to print from software using the XPS writer.  I attempted to reinstall the printer but the installation fails reporting “printer driver not installed.  Element not found”

Apparently, they are getting an error 1168: Element not found can have a wide variety of causes.

This article will guide you step-by-step on how to fix this error with the XPS printer.

How do you fix a generic error 1168?

1. Update your drivers

  1. Click on the Start button, then go to Settings
  2. Select Update & Security
  3. Click on Check for updates
  4. Allow Windows Update to download and install the updated driver

Follow these steps to install the latest printer drivers using Windows Update.

Alternatively, you can use a professional third-party tool that performs this process automatically and aims to keep your printer drivers updated and healthy.

More so, by choosing this automated method of managing drivers you also stay secure from potential damages caused by devices incompatibility.

Thus if you need reliable support to install or update any driver, the following software will accomplish this mission with no exception.

⇒ Get DriverFix

2. Try reinstalling the Windows XPS feature

  1. Press Windows
  2. Click on Settings (the cogwheel-shaped button)
  3. Select Apps
  4. Go to Apps & features
  5. Click Optional features
  6. Look for XPS feature if it is present
  7. If it is, right-click it and select uninstall
  8. Restart your PC
  9. After the restart or if your PC didn’t have the feature, go to the Manage optional features screen, and select Add a new feature
  10. When on the Add a new feature screen, select the XPS Viewer
  11. Restart your PC

Add a new feature XPS

3. Manually search for the location of your XPS Writer

Depending on which version of Windows 10 you have installed, the location of the XPS Writer may vary.

As such, if the solution listed above didn’t work, try this:

  1. Press Windows + R
  2. Type in control.exe
  3. Click Programs
  4. Select Programs and Features
  5. Click Turn Windows features on or off
  6. See if XPS Services and XPS Viewer are listed
    • If the services are marked in their checkbox, unmark them and restart the PC
    • If the services are unmarked in their checkbox, mark them and restart the PC
  7. Press Windows + R
  8. Type in control.exe
  9. Go to Hardware and Sound 
  10. Click Devices and Printers
  11. See if Microsoft XPS Document Writer is installed as a printer.
  12. If it is, right-click it and choose Remove device
  13. Restart your PC
  14. Go back to Devices and Printers and select Add a printer
  15. Select The printer that I want isn’t listed
  16. Click Add a local printer or network printer with manual setting
  17. In the Choose a printer port screen, select Use an existing port and PORTPROMPT: (Local Port)
  18. In the Install a printer driver screen, select Microsoft on the left pane and Microsoft XPS Document Writer on the right
  19. When asked Which version of the driver do you want to use? select Use the driver that is currently installed (recommended)

XPS printer remove device

If these particular steps didn’t help, you could also try to:

  • Uninstall Recent Windows Updates
  • Reset Your PC

newsletter icon

Newsletter

Источник

Как исправить ошибку принтера XPS 1168: элемент не найден

На официальных форумах Microsoft несколько пользователей сообщали о проблемах с принтером XPS:

Мне не удалось распечатать из программного обеспечения с помощью XPS Writer. Я попытался переустановить принтер, но при установке произошел сбой с сообщением «драйвер принтера не установлен. Элемент не найден »

Видимо, они получают ошибку 1168: элемент не найден может иметь самые разные причины.

В этой статье вы узнаете, как исправить эту ошибку с помощью принтера XPS.

Как исправить общую ошибку 1168?

1. Попробуйте переустановить функцию Windows XPS

  1. Нажмите Windows
  2. Нажмите на настройки (кнопка в форме зубчатого колеса)
  3. Выберите приложения
  4. Перейти к приложениям и функциям
  5. Нажмите Дополнительные функции
  6. Ищите функцию XPS, если она присутствует
  7. Если это так, щелкните его правой кнопкой мыши и выберите «Удалить».
  8. Перезагрузите компьютер
  9. После перезагрузки или, если на вашем компьютере не было этой функции, перейдите на экран « Управление дополнительными функциями» и выберите « Добавить новую функцию».
  10. На экране « Добавить новую функцию» выберите « Средство просмотра XPS».
  11. Перезагрузите компьютер

Добавить новую функцию XPS

2. Вручную найдите местоположение вашего XPS Writer

В зависимости от установленной версии Windows 10 расположение XPS Writer может отличаться.

Таким образом, если решение, указанное выше, не работает, попробуйте это:

  1. Нажмите Windows + R
  2. Введите control.exe
  3. Нажмите Программы
  4. Выберите программы и функции
  5. Нажмите Включить или отключить функции Windows.
  6. Посмотрите, есть ли в списке службы XPS и программа просмотра XPS
    • Если службы отмечены в их флажке, снимите их и перезагрузите компьютер
    • Если сервисы не помечены галочками, отметьте их и перезагрузите компьютер
  7. Нажмите Windows + R
  8. Введите control.exe
  9. Перейти к оборудованию и звуку
  10. Нажмите Устройства и принтеры
  11. Посмотрите, установлен ли Microsoft XPS Document Writer в качестве принтера.
  12. Если это так, щелкните правой кнопкой мыши и выберите « Удалить устройство».
  13. Перезагрузите компьютер
  14. Вернитесь в раздел «Устройства и принтеры» и выберите « Добавить принтер».
  15. Выберите нужный принтер, которого нет в списке
  16. Нажмите Добавить локальный принтер или сетевой принтер с ручной настройкой.
  17. На экране выбора порта принтера выберите Использовать существующий порт и PORTPROMPT: (Локальный порт)
  18. На экране установки драйвера принтера выберите Microsoft на левой панели и Microsoft XPS Document Writer на правой
  19. На вопрос, какую версию драйвера вы хотите использовать? выберите Использовать драйвер, который установлен в данный момент (рекомендуется)

Принтер XPS удалить устройство

Если эти конкретные шаги не помогли, вы также можете попробовать:

  • Обновите свои драйверы
  • Удалить последние обновления Windows
  • Перезагрузить компьютер

Источник
  • Remove From My Forums

  • Question

  • I am trying to install printer drivers on two Windows 2012R2 servers and I am getting  the error: Printer driver was not installed  ‘Element not found’.  In the setupapi.dev.log file it shows ‘

    Class installer: failed(0x00000490)!

    Error 1168: Element not found

    I have tried using the pnputil to add the driver, but nothing has worked.

Answers

  • This sounds like the print drivers are not package aware print drivers.

    I assume other printer drivers install without any issue, just some drivers that you have not mentioned where they were obtained.

    If the print driver does install on one 2012R2 machine, use the print backup utility c:windowssystem32spooltoolsprintbrm.exe to backup the driver and then restore the driver to the machine with the issue adding the driver to the driverstore.

    printbrm -b -f backup.printerexport

    printbrm -r -s printserver -f backup.printerexport

    Alan Morris formerly with Windows Printing Team

    • Proposed as answer by

      Wednesday, June 17, 2015 9:36 AM

    • Marked as answer by
      Vivian_Wang
      Monday, June 22, 2015 5:19 AM

Источник

SUPPORT COMMUNICATION- CUSTOMER ADVISORY

Document ID: c06417547

Version: 1

Notice: The information in this document, including products and software versions, is current as of the release date.The document is subject to change without notice.

Release date : 22-Jul-2019

Last updated : 22-Jul-2019

DESCRIPTION

When using Microsoft System Center Configuration Manager (SCCM) to configure systems in the SCOPE, the following DISM error occurs:

Error: 1168.

Element Not Found.

This occurs when the Microsoft Deployment Image Servicing and Management (DISM) command tool executes commands to configure the Realtek HD Audio driver (SoftPaq SP95193). The issue occurs because the driver includes a Universal Windows Platform (UWP) component that is not being handled properly.

SCOPE

Information in this document applies to the following:

Computers:

HP EliteBook 830 G5 Notebook PC

Operating Systems:

Microsoft Windows 10 RS5 (Version 1809)

RESOLUTION

Below are the steps necessary to install this component with SCCM.

  1. Extract SoftPaq .

  2. Add a batch file to install the UWP component with DISM. Here is the DISM command to insert into the batch file:

    @echo ON dism.exe /image:%OSD_System% /add-Driver /Driver:%~dp0HSAcb68d18decd44cd44c94bec5cd2a2c354180.appxbundle /Region=»all» /LicensePath:%~dp0HSAcb68d18decd44cd44c94bec5cd2a2c354180_License1.xml /DependencyPackagePath:%~dp0HSA Micrsooft.VCLibs.140.00_14.0.26706.0_x64_8wekyb3d8bbwe.appx

    note:

    The variable
    %OSD_System%, used in the command above, is set by the partitioning step previous in the task sequence.

  3. Create a package and add a command line step to execute the batch file right after windows image, and before Apply Windows Settings.

  4. Deploy the task sequence and use Device Manager to verify that the Realtek Audio driver is installed.

Hardware platforms affected :

HP EliteBook 830 G5 Notebook PC

Operating systems affected : Not applicable

Software affected : Not applicable

Support Communication Cross Reference ID : IA06417547

© Copyright 2023 HP Development Company, L.P.

HP Inc. shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided «as is» without warranty of any kind. To the extent permitted by law, neither HP or its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages including downtime cost; lost profits; damages relating to the procurement of substitute products or services; or damages for loss of data, or software restoration. The information in this document is subject to change without notice. HP Inc. and the names of HP products referenced herein are trademarks of HP Inc. in the United States and other countries. Other product and company names mentioned herein may be trademarks of their respective owners.

Источник

Понравилась статья? Поделить с друзьями:
  • Error 1155 installshield
  • Error 1146 42s02 table mysql user doesn t exist
  • Error 1054 unknown column price in having clause
  • Error 1054 unknown column author in field list
  • Error 1054 42s22 unknown column root in where clause