Error 1307 there is not enough disk space to install this file

I think that is good to have that here.

What does this MSI error mean?

For a detailed database of Windows Installer Errors and tips on how to tackle them, click here

-2147287038: %1 could not be found.
-2147023829: Installing this product requires the Windows Installer. An error occu…
13: The data is invalid.
120: This function is not available for this platform. It is only availabl…
258: The wait operation timed out.
1101: Could not open file stream: [2]. System error: [3]
1155: File [1] not found
1259: This error code only occurs when using Windows Installer version 2.0…
1301: Cannot create the file ‘[2]’. A directory with this name already exis…
1302: Please insert the disk: [2]
1303: The Installer has insufficient privileges to access this directory: …
1304: Error writing to File: [2]
1305: Error reading from File: [2]; System error code: [3]
1306: The file ‘[2]’ is in use. If you can, please close the application th…
1307: There is not enough disk space remaining to install this file: [2]. I…
1308: Source file not found: [2]
1309: Error attempting to open the source file: [3]. System error code: [2]
1310: Error attempting to create the destination file: [3]. System error co…
1311: Could not locate source file cabinet: [2].
1312: Cannot create the directory ‘[2]’. A file with this name already exis…
1313: The volume [2] is currently unavailable. Please select another.
1314: The specified path ‘[2]’ is unavailable.
1315: Unable to write to the specified folder: [2].
1316: A network error occurred while attempting to read from the file: [2]
1317: An error occurred while attempting to create the directory: [2]
1318: A network error occurred while attempting to create the directory: [2]
1319: A network error occurred while attempting to open the source file cab…
1320: The specified path is too long: ‘[2]’
1321: The Installer has insufficient privileges to modify this file: [2].
1322: A portion of the folder path ‘[2]’ is invalid. It is either empty or…
1323: The folder path ‘[2]’ contains words that are not valid in folder pat…
1324: The folder path ‘[2]’ contains an invalid character.
1325: ‘[2]’ is not a valid short file name.
1326: Error getting file security: [3] GetLastError: [2]
1327: Invalid Drive
1328: Error applying patch to file [2]. It has probably been updated by oth…
1329: A file that is required cannot be installed because the cabinet file …
1330: A file that is required cannot be installed because the cabinet file …
1331: Failed to correctly copy [2] file: CRC error.
1332: Failed to correctly move [2] file: CRC error.
1333: Failed to correctly patch [2] file: CRC error.
1334: The file ‘[2]’ cannot be installed because the file cannot be found i…
1335: The cabinet file ‘[2]’ required for this installation is corrupt and …
1336: There was an error creating a temporary file that is needed to comple…
1401: Could not create key: [2]. System error [3].
1402: Could not open key: [2]. System error [3].
1403: Could not delete value [2] from key [3]. System error [4].
1404: Could not delete key [2]. System error [3].
1405: Could not read value [2] from key [3]. System error [4].
1406: Could not write value [2] to key [3]. System error [4].
1407: Could not get value names for key [2]. System error [3].
1408: Could not get sub key names for key [2]. System error [3].
1409: Could not read security information for key [2]. System error [3].
1410: Could not increase the available registry space. [2] KB of free regis…
1500: Another installation is in progress. You must complete that installat…
1501: Error accessing secured data. Please make sure the Windows Installer …
1502: User ‘[2]’ has previously initiated an install for product ‘[3]’. Tha…
1503: User ‘[2]’ has previously initiated an install for product ‘[3]’. Tha…
1601: The Windows Installer Service Could Not Be Accessed
1601: The Windows Installer service could not be accessed. Contact your sup…
1602: The user cancels installation.
1602: Are you sure you want to cancel?
1603: The file [2][3] is being held in use by the following process: Name: …
1603: A fatal error occurred during installation.
1604: Installation suspended, incomplete.
1604: The product ‘[2]’ is already installed, and has prevented the install…
1605: This action is only valid for products that are currently installed.
1605: This action is only valid for products that are currently installed.
1606: The feature identifier is not registered.
1606: Could not access location [2].
1607: The following applications should be closed before continuing the ins…
1607: The component identifier is not registered.
1608: This is an unknown property.
1608: Could not find any previously installed compliant products on the mac…
1609: An error occurred while applying security settings. [2] is not a vali…
1609: The handle is in an invalid state.
1610: The configuration data for this product is corrupt. Contact your supp…
1611: The component qualifier not present.
1612: The installation source for this product is not available. Verify tha…
1613: This installation package cannot be installed by the Windows Installe…
1614: The product is uninstalled.
1615: The SQL query syntax is invalid or unsupported.
1616: The record field does not exist.
1618: Another installation is already in progress. Complete that installati…
1619: This installation package could not be opened. Verify that the packag…
1620: This installation package could not be opened. Contact the applicatio…
1621: There was an error starting the Windows Installer service user interf…
1622: There was an error opening installation log file. Verify that the spe…
1623: This language of this installation package is not supported by your s…
1624: There was an error applying transforms. Verify that the specified tra…
1625: This installation is forbidden by system policy. Contact your system …
1626: The function could not be executed.
1627: The function failed during execution.
1628: An invalid or unknown table was specified.
1629: The data supplied is the wrong type.
1630: Data of this type is not supported.
1631: The Windows Installer service failed to start. Contact your support p…
1632: The Temp folder is either full or inaccessible. Verify that the Temp …
1633: This installation package is not supported on this platform. Contact …
1634: Component is not used on this machine
1635: This patch package could not be opened. Verify that the patch package…
1636: This patch package could not be opened. Contact the application vendo…
1637: This patch package cannot be processed by the Windows Installer servi…
1638: Another version of this product is already installed. Installation of…
1639: Invalid command line argument. Consult the Windows Installer SDK for …
1640: Installation from a Terminal Server client session is not permitted f…
1641: The installer has initiated a restart. This message is indicative of …
1642: The installer cannot install the upgrade patch because the program be…
1643: The patch package is not permitted by system policy. This error code …
1644: One or more customizations are not permitted by system policy.
1645: Windows Installer does not permit installation from a Remote Desktop …
1646: The patch package is not a removable patch package.
1647: The patch is not applied to this product.
1648: No valid sequence could be found for the set of patches.
1649: Patch removal was disallowed by policy.
1650: The XML patch data is invalid.
1651: Admin user failed to apply patch for a per-user managed or a per-mach…
1701: [2] is not a valid entry for a product ID.
1702: Configuring [2] cannot be completed until you restart your system. To…
1703: For the configuration changes made to [2] to take effect you must res…
1704: An install for [2] is currently suspended. You must undo the changes …
1705: A previous install for this product is in progress. You must undo the…
1706: No valid source could be found for product [2].
1707: Installation operation completed successfully.
1708: Installation operation failed.
1709: Product: [2] — [3]
1710: You may either restore your computer to its previous state or continu…
1711: An error occurred while writing installation information to disk. Che…
1712: One or more of the files required to restore your computer to its pre…
1713: [2] cannot install one of its required products. Contact your technic…
1714: The older version of [2] cannot be removed. Contact your technical su…
1715: Installed [2].
1716: Configured [2].
1717: Removed [2].
1718: File [2] was rejected by digital signature policy.
1719: Windows Installer service could not be accessed. Contact your support…
1720: There is a problem with this Windows Installer package. A script requ…
1721: There is a problem with this Windows Installer package. A program req…
1722: There is a problem with this Windows Installer package. A program run…
1723: There is a problem with this Windows Installer package. A DLL require…
1724: Removal completed successfully.
1725: Removal failed.
1726: Advertisement completed successfully.
1727: Advertisement failed.
1728: Configuration completed successfully.
1729: Configuration failed.
1730: You must be an Administrator to remove this application. To remove th…
1731: The source installation package for the product [2] is out of sync wi…
1732: In order to complete the installation of [2], you must restart the co…
1801: The path [2] is not valid
1802: Out of memory
1803: There is no disk in drive [2]. Please, insert one and click Retry, or…
1804: There is no disk in drive [2]. Please, insert one and click Retry, or…
1805: The path [2] does not exist
1806: You have insufficient privileges to read this folder.
1807: A valid destination folder for the install could not be determined.
1901: Error attempting to read from the source install database: [2]
1902: Scheduling restart operation: Renaming file [2] to [3]. Must restart …
1903: Scheduling restart operation: Deleting file [2]. Must restart to comp…
1904: Module [2] failed to register. HRESULT [3].
1905: Module [2] failed to unregister. HRESULT [3].
1906: Failed to cache package [2]. Error: [3]
1907: Could not register font [2]. Verify that you have sufficient permissi…
1908: Could not unregister font [2]. Verify that you have sufficient permis…
1909: Could not create shortcut [2]. Verify that the destination folder exi…
1910: Could not remove shortcut [2]. Verify that the shortcut file exists a…
1911: Could not register type library for file [2]. Contact your support pe…
1912: Could not unregister type library for file [2]. Contact your support …
1913: Could not update the .ini file [2][3]. Verify that the file exists an…
1914: Could not schedule file [2] to replace file [3] on restart. Verify th…
1915: Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your…
1916: Error installing ODBC driver manager, ODBC error [2]: [3]. Contact yo…
1917: Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you…
1918: Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that t…
1919: Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify …
1920: Service ‘[2]’ ([3]) failed to start. Verify that you have sufficient …
1921: Service ‘[2]’ ([3]) could not be stopped. Verify that you have suffic…
1922: Service ‘[2]’ ([3]) could not be deleted. Verify that you have suffic…
1923: Service ‘[2]’ ([3]) could not be installed. Verify that you have suff…
1924: Could not update environment variable ‘[2]’. Verify that you have suf…
1925: You do not have sufficient privileges to complete this installation f…
1926: Could not set file security for file ‘[3]’. Error: [2]. Verify that y…
1927: The installation requires COM+ Services to be installed.
1928: The installation failed to install the COM+ Application.
1929: The installation failed to remove the COM+ Application.
1930: The description for service ‘[2]’ ([3]) could not be changed.
1931: The Windows Installer service cannot update the system file [2] becau…
1932: The Windows Installer service cannot update the protected Windows fil…
1933: The Windows Installer service cannot update one or more protected Win…
1934: User installations are disabled through policy on the machine.
1935: An error occurred during the installation of assembly component [2]. …
1936: An error occurred during the installation of assembly ‘[6]’. The asse…
1937: An error occurred during the installation of assembly ‘[6]’. The sign…
1938: An error occurred during the installation of assembly ‘[6]’. One or m…
2101: Shortcuts not supported by the operating system.
2102: Invalid .ini action: [2]
2103: Could not resolve path for shell folder
2104: Writing .ini file: [3]: System error: [2].
2105: Shortcut Creation [3] Failed. System error: [2].
2106: Shortcut Deletion [3] Failed. System error: [2].
2107: Error [3] registering type library [2].
2108: Error [3] unregistering type library [2].
2109: Section missing for .ini action.
2110: Key missing for .ini action.
2111: Detection of running applications failed, could not get performance d…
2112: Detection of running applications failed, could not get performance i…
2113: Detection of running applications failed.
2200: Database: [2]. Database object creation failed, mode = [3].
2201: Database: [2]. Data access failed, out of memory.
2202: Database: [2]. Data access failed, out of memory.
2203: Database: [2]. Cannot open database file. System error [3].
2204: Database: [2]. Table already exists: [3].
2205: Database: [2]. Table does not exist: [3].
2206: Database: [2]. Table could not be dropped: [3].
2207: Database: [2]. Intent violation.
2208: Database: [2]. Insufficient parameters for Execute.
2209: Database: [2]. Cursor in invalid state.
2210: Database: [2]. Invalid update data type in column [3].
2211: Database: [2]. Could not create database table [3].
2212: Database: [2]. Database not in writable state.
2213: Database: [2]. Error saving database tables.
2214: Database: [2]. Error writing export file: [3].
2215: Database: [2]. Cannot open import file: [3].
2216: Database: [2]. Import file format error: [3], Line [4].
2217: Database: [2]. Wrong state to CreateOutputDatabase [3].
2218: Database: [2]. Table name not supplied.
2219: Database: [2]. Invalid Installer database format.
2220: Database: [2]. Invalid row/field data.
2221: Database: [2]. Code page conflict in import file: [3].
2222: Database: [2]. Transform or merge code page [3] differs from database…
2223: Database: [2]. Databases are the same. No transform generated.
2224: Database: [2]. GenerateTransform: Database corrupt. Table: [3].
2225: Database: [2]. Transform: Cannot transform a temporary table. Table: …
2226: Database: [2]. Transform failed.
2227: Database: [2]. Invalid identifier ‘[3]’ in SQL query: [4].
2228: Database: [2]. Unknown table ‘[3]’ in SQL query: [4].
2229: Database: [2]. Could not load table ‘[3]’ in SQL query: [4].
2230: Database: [2]. Repeated table ‘[3]’ in SQL query: [4].
2231: Database: [2]. Missing ‘)’ in SQL query: [3].
2232: Database: [2]. Unexpected token ‘[3]’ in SQL query: [4].
2233: Database: [2]. No columns in SELECT clause in SQL query: [3].
2234: Database: [2]. No columns in ORDER BY clause in SQL query: [3].
2235: Database: [2]. Column ‘[3]’ not present or ambiguous in SQL query: [4…
2236: Database: [2]. Invalid operator ‘[3]’ in SQL query: [4].
2237: Database: [2]. Invalid or missing query string: [3].
2238: Database: [2]. Missing FROM clause in SQL query: [3].
2239: Database: [2]. Insufficient values in INSERT SQL statement.
2240: Database: [2]. Missing update columns in UPDATE SQL statement.
2241: Database: [2]. Missing insert columns in INSERT SQL statement.
2242: Database: [2]. Column ‘[3]’ repeated.
2243: Database: [2]. No primary columns defined for table creation.
2244: Database: [2]. Invalid type specifier ‘[3]’ in SQL query [4].
2245: IStorage::Stat failed with error [3].
2246: Database: [2]. Invalid Installer transform format.
2247: Database: [2] Transform stream read/write failure.
2248: Database: [2] GenerateTransform/Merge: Column type in base table does…
2249: Database: [2] GenerateTransform: More columns in base table than in r…
2250: Database: [2] Transform: Cannot add existing row. Table: [3].
2251: Database: [2] Transform: Cannot delete row that does not exist. Table…
2252: Database: [2] Transform: Cannot add existing table. Table: [3].
2253: Database: [2] Transform: Cannot delete table that does not exist. Tab…
2254: Database: [2] Transform: Cannot update row that does not exist. Table…
2255: Database: [2] Transform: Column with this name already exists. Table:…
2256: Database: [2] GenerateTransform/Merge: Number of primary keys in base…
2257: Database: [2]. Intent to modify read only table: [3].
2258: Database: [2]. Type mismatch in parameter: [3].
2259: Database: [2] Table(s) Update failed
2260: Storage CopyTo failed. System error: [3].
2261: Could not remove stream [2]. System error: [3].
2262: Stream does not exist: [2]. System error: [3].
2263: Could not open stream [2]. System error: [3].
2264: Could not remove stream [2]. System error: [3].
2265: Could not commit storage. System error: [3].
2266: Could not rollback storage. System error: [3].
2267: Could not delete storage [2]. System error: [3].
2268: Database: [2]. Merge: There were merge conflicts reported in [3] tabl…
2269: Database: [2]. Merge: The column count differed in the ‘[3]’ table of…
2270: Database: [2]. GenerateTransform/Merge: Column name in base table doe…
2271: SummaryInformation write for transform failed.
2272: Database: [2]. MergeDatabase will not write any changes because the d…
2273: Database: [2]. MergeDatabase: A reference to the base database was pa…
2274: Database: [2]. MergeDatabase: Unable to write errors to Error table. …
2275: Database: [2]. Specified Modify [3] operation invalid for table joins.
2276: Database: [2]. Code page [3] not supported by the system.
2277: Database: [2]. Failed to save table [3].
2278: Database: [2]. Exceeded number of expressions limit of 32 in WHERE cl…
2279: Database: [2] Transform: Too many columns in base table [3].
2280: Database: [2]. Could not create column [3] for table [4].
2281: Could not rename stream [2]. System error: [3].
2282: Stream name invalid [2].
2302: Patch notify: [2] bytes patched to far.
2303: Error getting volume info. GetLastError: [2].
2304: Error getting disk free space. GetLastError: [2]. Volume: [3].
2305: Error waiting for patch thread. GetLastError: [2].
2306: Could not create thread for patch application. GetLastError: [2].
2307: Source file key name is null.
2308: Destination file name is null.
2309: Attempting to patch file [2] when patch already in progress.
2310: Attempting to continue patch when no patch is in progress.
2315: Missing path separator: [2].
2318: File does not exist: [2].
2319: Error setting file attribute: [3] GetLastError: [2].
2320: File not writable: [2].
2321: Error creating file: [2].
2322: User canceled.
2323: Invalid file attribute.
2324: Could not open file: [3] GetLastError: [2].
2325: Could not get file time for file: [3] GetLastError: [2].
2326: Error in FileToDosDateTime.
2326: Error in FileToDosDateTime.
2327: Could not remove directory: [3] GetLastError: [2].
2328: Error getting file version info for file: [2].
2328: Error getting file version info for file: [2].
2329: Error deleting file: [3]. GetLastError: [2].
2330: Error getting file attributes: [3]. GetLastError: [2].
2331: Error loading library [2] or finding entry point [3].
2332: Error getting file attributes. GetLastError: [2].
2333: Error setting file attributes. GetLastError: [2].
2334: Error converting file time to local time for file: [3]. GetLastError:…
2335: Path: [2] is not a parent of [3].
2336: Error creating temp file on path: [3]. GetLastError: [2].
2337: Could not close file: [3] GetLastError: [2].
2338: Could not update resource for file: [3] GetLastError: [2].
2339: Could not set file time for file: [3] GetLastError: [2].
2340: «Could not update resource for file: [3], Missing resource.»
2341: «Could not update resource for file: [3], Resource too large.»
2342: Could not update resource for file: [3] GetLastError: [2].
2343: Specified path is empty
2344: Could not find required file IMAGEHLP.DLL to validate file:[2].
2345: [2]: File does not contain a valid checksum value.
2347: User ignore.
2348: Error attempting to read from cabinet stream.
2349: Copy resumed with different info.
2350: FDI server error
2351: File key ‘[2]’ not found in cabinet ‘[3]’. The installation cannot co…
2352: Could not initialize cabinet file server. The required file ‘CABINET….
2353: Not a cabinet.
2354: Cannot handle cabinet.
2355: Corrupt cabinet.
2356: Couldn’t locate cabinet in stream: [2].
2357: Cannot set attributes.
2358: Error determining whether file is in-use: [3]. GetLastError: [2].
2359: Unable to create the target file — file may be in use.
2360: Progress tick.
2361: Need next cabinet.
2362: Folder not found: [2].
2363: Could not enumerate subfolders for folder: [2].
2364: Bad enumeration constant in CreateCopier call.
2365: Could not BindImage exe file [2].
2366: User failure.
2367: User abort.
2368: «Failed to get network resource information. Error [2], network path …
2370: «Invalid CRC checksum value for [2] file.{ Its header says [3] for ch…
2371: Could not apply patch to file [2]. GetLastError: [3].
2372: Patch file [2] is corrupt or of an invalid format. Attempting to patc…
2373: File [2] is not a valid patch file.
2374: File [2] is not a valid destination file for patch file [3].
2375: Unknown patching error: [2].
2376: Cabinet not found.
2379: Error opening file for read: [3] GetLastError: [2].
2380: Error opening file for write: [3]. GetLastError: [2].
2381: Directory does not exist: [2].
2382: Drive not ready: [2].
2401: 64-bit registry operation attempted on 32-bit operating system for ke…
2402: Out of memory.
2501: Could not create rollback script enumerator.
2502: Called InstallFinalize when no install in progress
2503: Called RunScript when not marked in progress.
2601: Invalid value for property [2]: ‘[3]’
2602: The [2] table entry ‘[3]’ has no associated entry in the Media table.
2603: Duplicate table name [2].
2604: [2] Property undefined.
2605: Could not find server [2] in [3] or [4].
2606: Value of property [2] is not a valid full path: ‘[3]’.
2607: Media table not found or empty (required for installation of files).
2608: Could not create security descriptor for object. Error: ‘[2]’.
2609: Attempt to migrate product settings before initialization.
2611: «The file [2] is marked as compressed, but the associated media entry…
2612: Stream not found in ‘[2]’ column. Primary key: ‘[3]’.
2613: RemoveExistingProducts action sequenced incorrectly.
2614: Could not access IStorage object from installation package.
2615: Skipped unregistration of Module [2] due to source resolution failure.
2616: Companion file [2] parent missing.
2617: Shared component [2] not found in Component table.
2618: Isolated application component [2] not found in Component table.
2619: «Isolated components [2], [3] not part of same feature.»
2620: Key file of isolated application component [2] not in File table.
2701: The Component table exceeds the acceptable tree depth of [2] levels.
2702: A Feature table record ([2]) references a non-existent parent in the …
2703: Property name for root source path not defined: [2]
2704: Root directory property undefined: [2]
2705: Invalid table: [2]; Could not be linked as tree.
2706: Source paths not created. No path exists for entry [2] in Directory t…
2707: Target paths not created. No path exists for entry [2] in Directory t…
2708: No entries found in the file table.
2709: The specified Component name (‘[2]’) not found in Component table.
2710: The requested ‘Select’ state is illegal for this Component.
2711: The specified Feature name (‘[2]’) not found in Feature table.
2712: «Invalid return from modeless dialog: [3], in action [2].»
2713: Null value in a non-nullable column (‘[2]’ in ‘[3]’ column of the ‘[4…
2714: Invalid value for default folder name: [2].
2715: The specified File key (‘[2]’) not found in the File Table.
2716: Could not create a random subcomponent name for component ‘[2]’.
2717: Bad action condition or error calling custom action ‘[2]’.
2718: Missing package name for product code ‘[2]’.
2719: Neither UNC nor drive letter path found in source ‘[2]’.
2720: Error opening source list key. Error: ‘[2]’
2721: Custom action [2] not found in Binary table stream.
2722: Custom action [2] not found in File table.
2723: Custom action [2] specifies unsupported type.
2724: The volume label ‘[2]’ on the media you’re running from does not matc…
2725: Invalid database tables
2726: Action not found: [2].
2727: The directory entry ‘[2]’ does not exist in the Directory table.
2728: Table definition error: [2]
2729: Install engine not initialized.
2730: Bad value in database. Table: ‘[2]’; Primary key: ‘[3]’; Column: ‘[4]’
2731: Selection Manager not initialized
2732: Directory Manager not initialized.
2733: Bad foreign key (‘[2]’) in ‘[3]’ column of the ‘[4]’ table.
2734: Invalid reinstall mode character.
2735: «Custom action ‘[2]’ has caused an unhandled exception and has been s…
2736: Generation of custom action temp file failed: [2].
2737: «Could not access custom action [2], entry [3], library [4]»
2738: Could not access VBScript run time for custom action [2].
2739: Could not access JavaScript run time for custom action [2].
2740: «Custom action [2] script error [3], [4]: [5] Line [6], Column [7], […
2741: Configuration information for product [2] is corrupt. Invalid info: […
2742: Marshaling to Server failed: [2].
2743: «Could not execute custom action [2], location: [3], command: [4].»
2744: «EXE failed called by custom action [2], location: [3], command: [4].»
2745: «Transform [2] invalid for package [3]. Expected language [4], found …
2746: «Transform [2] invalid for package [3]. Expected product [4], found p…
2747: «Transform [2] invalid for package [3]. Expected product version < [4…
2748: «Transform [2] invalid for package [3]. Expected product version <= […
2749: «Transform [2] invalid for package [3]. Expected product version == […
2750: «Transform [2] invalid for package [3]. Expected product version >= […
2751: «Transform [2] invalid for package [3]. Expected product version > [4…
2752: Could not open transform [2] stored as child storage of package [4].
2753: The File ‘[2]’ is not marked for installation.
2754: The File ‘[2]’ is not a valid patch file.
2755: Server returned unexpected error [2] attempting to install package [3…
2756: The property ‘[2]’ was used as a directory property in one or more ta…
2757: Could not create summary info for transform [2].
2758: Transform [2] does not contain an MSI version.
2759: Transform [2] version [3] incompatible with engine; Min: [4], Max: [5…
2760: «Transform [2] invalid for package [3]. Expected upgrade code [4], fo…
2761: Cannot begin transaction. Global mutex not properly initialized.
2762: Cannot write script record. Transaction not started.
2763: Cannot run script. Transaction not started.
2765: Assembly name missing from AssemblyName table : Component: [4].
2766: The file [2] is an invalid MSI storage file.
2767: No more data{ while enumerating [2]}.
2768: Transform in patch package is invalid.
2769: Custom Action [2] did not close [3] MSIHANDLEs.
2770: Cached folder [2] not defined in internal cache folder table.
2771: Upgrade of feature [2] has a missing component. .
2772: New upgrade feature [2] must be a leaf feature.
2801: Unknown Message — Type [2]. No action is taken.
2802: No publisher is found for the event [2].
2803: Dialog View did not find a record for the dialog [2].
2804: On activation of the control [3] on dialog [2] CMsiDialog failed to e…
2805:
2806: The dialog [2] failed to evaluate the condition [3].
2807: The action [2] is not recognized.
2808: Default button is ill-defined on dialog [2].
2809: «On the dialog [2] the next control pointers do not form a cycle. The…
2810: On the dialog [2] the next control pointers do not form a cycle. Ther…
2811: «On dialog [2] control [3] has to take focus, but it is unable to do …
2812: The event [2] is not recognized.
2813: «The EndDialog event was called with the argument [2], but the dialog…
2814: On the dialog [2] the control [3] names a nonexistent control [4] as …
2815: ControlCondition table has a row without condition for the dialog [2].
2816: The EventMapping table refers to an invalid control [4] on dialog [2]…
2817: The event [2] failed to set the attribute for the control [4] on dial…
2818: In the ControlEvent table EndDialog has an unrecognized argument [2].
2819: Control [3] on dialog [2] needs a property linked to it.
2820: Attempted to initialize an already initialized handler.
2821: Attempted to initialize an already initialized dialog: [2].
2822: No other method can be called on dialog [2] until all the controls ar…
2823: Attempted to initialize an already initialized control: [3] on dialog…
2824: The dialog attribute [3] needs a record of at least [2] field(s).
2825: The control attribute [3] needs a record of at least [2] field(s).
2826: Control [3] on dialog [2] extends beyond the boundaries of the dialog…
2827: The button [4] on the radio button group [3] on dialog [2] extends be…
2828: «Tried to remove control [3] from dialog [2], but the control is not …
2829: Attempt to use an uninitialized dialog.
2830: Attempt to use an uninitialized control on dialog [2].
2831: The control [3] on dialog [2] does not support [5] the attribute [4].
2832: The dialog [2] does not support the attribute [3].
2833: Control [4] on dialog [3] ignored the message [2].
2834: The next pointers on the dialog [2] do not form a single loop.
2835: The control [2] was not found on dialog [3].
2836: The control [3] on the dialog [2] cannot take focus.
2837: The control [3] on dialog [2] wants the winproc to return [4].
2838: The item [2] in the selection table has itself as a parent.
2839: Setting the property [2] failed.
2840: Error dialog name mismatch.
2841: No OK button was found on the error dialog.
2842: No text field was found on the error dialog.
2843: The ErrorString attribute is not supported for standard dialogs.
2844: Cannot execute an error dialog if the Errorstring is not set.
2845: The total width of the buttons exceeds the size of the error dialog.
2846: SetFocus did not find the required control on the error dialog.
2847: The control [3] on dialog [2] has both the icon and the bitmap style …
2848: «Tried to set control [3] as the default button on dialog [2], but th…
2849: «The control [3] on dialog [2] is of a type, that cannot be integer v…
2850: Unrecognized volume type.
2851: The data for the icon [2] is not valid.
2852: At least one control has to be added to dialog [2] before it is used.
2853: Dialog [2] is a modeless dialog. The execute method should not be cal…
2854: On the dialog [2] the control [3] is designated as first active contr…
2855: The radio button group [3] on dialog [2] has fewer than 2 buttons.
2856: Creating a second copy of the dialog [2].
2857: The directory [2] is mentioned in the selection table but not found.
2858: The data for the bitmap [2] is not valid.
2859: Test error message.
2860: Cancel button is ill-defined on dialog [2].
2861: The next pointers for the radio buttons on dialog [2] control [3] do …
2862: The attributes for the control [3] on dialog [2] do not define a vali…
2863: The control [3] on the dialog [2] cannot take focus.
2864: «The control [3] on dialog [2] received a browse event, but there is …
2865: Control [3] on billboard [2] extends beyond the boundaries of the bil…
2866: The dialog [2] is not allowed to return the argument [3].
2867: The error dialog property is not set.
2868: The error dialog [2] does not have the error style bit set.
2869: «The dialog [2] has the error style bit set, but is not an error dial…
2870: The help string [4] for control [3] on dialog [2] does not contain th…
2871: The [2] table is out of date: [3].
2872: The argument of the CheckPath control event on dialog [2] is invalid.
2873: On the dialog [2] the control [3] has an invalid string length limit:…
2874: Changing the text font to [2] failed.
2875: Changing the text color to [2] failed.
2876: The control [3] on dialog [2] had to truncate the string: [4].
2877: The binary data [2] was not found
2878: On the dialog [2] the control [3] has a possible value: [4]. This is …
2879: The control [3] on dialog [2] cannot parse the mask string: [4].
2880: Do not perform the remaining control events.
2881: CMsiHandler initialization failed.
2882: Dialog window class registration failed.
2883: CreateNewDialog failed for the dialog [2].
2884: Failed to create a window for the dialog [2].
2885: Failed to create the control [3] on the dialog [2].
2886: Creating the [2] table failed.
2887: Creating a cursor to the [2] table failed.
2888: Executing the [2] view failed.
2889: Creating the window for the control [3] on dialog [2] failed.
2890: The handler failed in creating an initialized dialog.
2891: Failed to destroy window for dialog [2].
2892: «[2] is an integer only control, [3] is not a valid integer value.»
2893: «The control [3] on dialog [2] can accept property values that are at…
2894: Loading RICHED20.DLL failed. GetLastError() returned: [2].
2895: Freeing RICHED20.DLL failed. GetLastError() returned: [2].
2896: Executing action [2] failed.
2897: Failed to create any [2] font on this system.
2898: For [2] textstyle, the system created a ‘[3]’ font, in [4] character …
2899: Failed to create [2] textstyle. GetLastError() returned: [3].
2901: Invalid parameter to operation [2]: Parameter [3].
2902: Operation ? called out of sequence.
2903: The file [2] is missing.
2904: Could not BindImage file [2].
2905: Could not read record from script file [2].
2906: Missing header in script file [2].
2907: Could not create secure security descriptor. Error: [2].
2908: Could not register component [2].
2909: Could not unregister component [2].
2910: Could not determine user’s security ID.
2911: Could not remove the folder [2].
2912: Could not schedule file [2] for removal on restart.
2919: No cabinet specified for compressed file: [2].
2920: Source directory not specified for file [2].
2924: «Script [2] version unsupported. Script version: [3], minimum version…
2927: ShellFolder id [2] is invalid.
2928: Exceeded maximum number of sources. Skipping source ‘[2]’.
2929: Could not determine publishing root. Error: [2].
2932: Could not create file [2] from script data. Error: [3].
2933: Could not initialize rollback script [2].
2934: Could not secure transform [2]. Error [3].
2935: Could not unsecure transform [2]. Error [3].
2936: Could not find transform [2].
2937: «Windows Installer cannot install a system file protection catalog. C…
2938: «Windows Installer cannot retrieve a system file protection catalog f…
2939: «Windows Installer cannot delete a system file protection catalog fro…
2940: Directory Manager not supplied for source resolution.
2941: Unable to compute the CRC for file [2].
2942: BindImage action has not been executed on [2] file.
2943: This version of Windows does not support deploying 64-bit packages. T…
2944: GetProductAssignmentType failed.
2945: Installation of ComPlus App [2] failed with error [3].
3001: The patches in this list contain incorrect sequencing information: [2…
3002: Patch [2] contains invalid sequencing information.
3010: A restart is required to complete the install. This message is indica…

source: http://www.appdeploy.com/faq/detail.asp?id=79

Message Code Message Remarks

1101

Could not open file stream: [2]. System error: [3]

1301

Cannot create the file ‘[2]’. A directory with this name already exists.

1302

Please insert the disk: [2]

1303

The Installer has insufficient privileges to access this directory: [2].

1304

Error writing to File: [2]

1305

Error reading from File: [2]; System error code: [3]

1306

The file ‘[2]’ is in use. If you can, please close the application that is using the file, then click
Retry.

A system restart may be required because a file being updated is also currently in use. For more
information, see System Reboots.

1307

There is not enough disk space remaining to install this file: [2]. If you can, free up some disk space, and
click Retry, or click Cancel to exit.

1308

Source file not found: [2]

1309

Error attempting to open the source file: [3]. System error code: [2]

1310

Error attempting to create the destination file: [3]. System error code: [2]

1311

Could not locate source file cabinet: [2].

1312

Cannot create the directory ‘[2]’. A file with this name already exists. Please rename or remove the file
and click Retry, or click Cancel to exit.

1313

The volume [2] is currently unavailable. Please select another.

1314

The specified path ‘[2]’ is unavailable.

1315

Unable to write to the specified folder: [2].

1316

A network error occurred while attempting to read from the file: [2]

1317

An error occurred while attempting to create the directory: [2]

1318

A network error occurred while attempting to create the directory: [2]

1319

A network error occurred while attempting to open the source file cabinet: [2].

1320

The specified path is too long: ‘[2]’

1321

The Installer has insufficient privileges to modify this file: [2].

1322

A portion of the folder path ‘[2]’ is invalid. It is either empty or exceeds the length allowed by the
system.

1323

The folder path ‘[2]’ contains words that are not valid in folder paths.

1324

The folder path ‘[2]’ contains an invalid character.

1325

‘[2]’ is not a valid short file name.

1326

Error getting file security: [3] GetLastError: [2]

1327

Invalid Drive: [2]

1328

Error applying patch to file [2]. It has probably been updated by other means, and can no longer be modified
by this patch. For more information, contact your patch vendor. System Error: [3]

1329

A file that is required cannot be installed because the cabinet file [2] is not digitally signed. This may
indicate that the cabinet file is corrupt.

1330

A file that is required cannot be installed because the cabinet file [2] has an invalid digital signature.
This may indicate that the cabinet file is corrupt.{ Error [3] was returned by
WinVerifyTrust.}

1331

Failed to correctly copy [2] file: CRC error.

1332

Failed to correctly move [2] file: CRC error.

1333

Failed to correctly patch [2] file: CRC error.

1334

The file ‘[2]’ cannot be installed because the file cannot be found in cabinet file ‘[3]’. This could
indicate a network error, an error reading from the CD-ROM, or a problem with this package.

1335

The cabinet file ‘[2]’ required for this installation is corrupt and cannot be used. This could indicate a
network error, an error reading from the CD-ROM, or a problem with this package.

1336

There was an error creating a temporary file that is needed to complete this installation. Folder: [3].
System error code: [2]

1401

Could not create key: [2]. System error [3].

1402

Could not open key: [2]. System error [3].

1403

Could not delete value [2] from key [3]. System error [4].

1404

Could not delete key [2]. System error [3].

1405

Could not read value [2] from key [3]. System error [4].

1406

Could not write value [2] to key [3]. System error [4].

1407

Could not get value names for key [2]. System error [3].

1408

Could not get sub key names for key [2]. System error [3].

1409

Could not read security information for key [2]. System error [3].

1410

Could not increase the available registry space. [2] KB of free registry space is required for the
installation of this application.

1500

Another installation is in progress. You must complete that installation before continuing this one.

Test packages in high-traffic environments where users request the installation of many applications. For
more information, see _MSIExecute Mutex.

1501

Error accessing secured data. Please make sure the Windows Installer is configured properly and try the
install again.

1502

User ‘[2]’ has previously initiated an install for product ‘[3]’. That user will need to run that install
again before they can use that product. Your current install will now continue.

Test packages in high-traffic environments where users request the installation of many applications. For
more information, see _MSIExecute Mutex.

1503

User ‘[2]’ has previously initiated an install for product ‘[3]’. That user will need to run that install again before they can use that product.

Test packages in high-traffic environments where users request the installation of many applications. For
more information, see _MSIExecute Mutex.

1601

Out of disk space — Volume: ‘[2]’; required space: [3] KB; available space: [4] KB

Ensure that the custom action costs do not exceed available space.

1602

Are you sure you want to cancel?

1603

The file [2][3] is being held in use by the following process: Name: [4], Id: [5], Window Title: ‘[6]’.

A system restart may be required because the file being updated is also currently in use. Users may be given
the opportunity to avoid some system restarts by using the
FilesInUse Dialog or the
MsiRMFilesInUse Dialog. For more information,
see System Reboots and
Logging of Reboot Requests.

1604

The product ‘[2]’ is already installed, and has prevented the installation of this product.

1605

Out of disk space — Volume: ‘[2]’; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click Cancel to quit, Retry to check available disk space again, or Ignore to continue without rollback.

Ensure that the custom action costs do not exceed the available space.

1606

Could not access location [2].

Do not list directories in the Directory table which are not used by the installation.

Rarely, this message is due to the issue discussed by KB886549.

1607

The following applications should be closed before continuing the install:

A system restart may be required because a file that is being updated is also currently in use. Users may be given the opportunity to avoid some system restarts by selecting to close some applications. For more information, see System Reboots.

1608

Could not find any previously installed compliant products on the machine for installing this product

No file listed in the CCPSearch table can be found on the user’s computer.

1609

An error occurred while applying security settings. [2] is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. Unable to locate the user’s SID, system error [3]

1610

The setup must update files or services that cannot be updated while the system is running. If you choose to continue, a reboot will be required to complete the setup.

Available in Windows Installer version 4.0.

1611

The setup was unable to automatically close all requested applications. Please ensure that the applications holding files in use are closed before continuing with the installation.

Available in Windows Installer version 4.0.

1651

Admin user failed to apply patch for a per-user managed or a per-machine application which is in advertise state.

Available in Windows Installer version 3.0.

1701

[2] is not a valid entry for a product ID.

1702

Configuring [2] cannot be completed until you restart your system. To restart now and resume configuration click Yes, or click No to stop this configuration.

A scheduled system restart message. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.

1703

For the configuration changes made to [2] to take effect you must restart your system. To restart now click Yes, or click No if you plan to manually restart at a later time.

The scheduled system restart message when no other users are logged on the computer. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.

1704

An install for [2] is currently suspended. You must undo the changes made by that install to continue. Do you want to undo those changes?

1705

A previous install for this product is in progress. You must undo the changes made by that install to continue. Do you want to undo those changes?

1706

No valid source could be found for product [2].

1707

Installation operation completed successfully.

1708

Installation operation failed.

1709

Product: [2] — [3]

1710

You may either restore your computer to its previous state or continue the install later. Would you like to restore?

1711

An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install.

1712

One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.

1713

[2] cannot install one of its required products. Contact your technical support group. System Error: [3].

1714

The older version of [2] cannot be removed. Contact your technical support group. System Error [3].

1715

Installed [2].

1716

Configured [2].

1717

Removed [2].

1718

File [2] was rejected by digital signature policy.

A very large installation may cause the operating system to run out of memory.

1719

Windows Installer service could not be accessed. Contact your support personnel to verify that it is properly registered and enabled.

1720

There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8]

1721

There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: [2], location: [3], command: [4]

1722

There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action [2], location: [3], command: [4]

1723

There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action [2], entry: [3], library: [4]

Ensure that the functions used by custom actions are actually exported. For more information about custom actions based upon a DLL, see Dynamic-Link Libraries.

1724

Removal completed successfully.

1725

Removal failed.

1726

Advertisement completed successfully.

1727

Advertisement failed.

1728

Configuration completed successfully.

1729

Configuration failed.

1730

You must be an Administrator to remove this application. To remove this application, you can log on as an administrator, or contact your technical support group for assistance.

1731

The source installation package for the product [2] is out of sync with the client package.
Try the installation again using a valid copy of the installation package ‘[3]’.

Available beginning with Windows Installer for Windows Server 2003.

1732

In order to complete the installation of [2], you must restart the computer. Other users are currently logged on to this computer, and restarting may cause them to lose their work. Do you want to restart now?

The scheduled system restart message when other users are logged on the computer. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.

Available beginning with Windows Installer for Windows Server 2003.

1801

The path [2] is not valid

1802

Out of memory

1803

There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to go back to the previously selected volume.

1804

There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.

1805

The path [2] does not exist

1806

You have insufficient privileges to read this folder.

1807

A valid destination folder for the install could not be determined.

1901

Error attempting to read from the source install database: [2]

1902

Scheduling restart operation: Renaming file [2] to [3]. Must restart to complete operation.

An file being updated by the installation is currently in use. Windows Installer renames the file to update it and removes the old version at the next restart of the system.

1903

Scheduling restart operation: Deleting file [2]. Must restart to complete operation.

A system restart may be required because the file that is being updated is also currently in use. Users may be given the opportunity to avoid some system restarts by using the FilesInUse Dialog or MsiRMFilesInUse Dialog. For more information, see System Reboots and Logging of Reboot Requests.

1904

Module [2] failed to register. HRESULT [3].

1905

Module [2] failed to unregister. HRESULT [3].

1906

Failed to cache package [2]. Error: [3]

1907

Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.

1908

Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts.

1909

Could not create shortcut [2]. Verify that the destination folder exists and that you can access it.

1910

Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it.

1911

Could not register type library for file [2]. Contact your support personnel.

Error loading a type library or DLL.

1912

Could not unregister type library for file [2]. Contact your support personnel.

Error loading a type library or DLL.

1913

Could not update the .ini file [2][3]. Verify that the file exists and that you can access it.

1914

Could not schedule file [2] to replace file [3] on restart. Verify that you have write permissions to file [3].

1915

Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.

1916

Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.

1917

Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.

1918

Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.

1919

Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.

1920

Service ‘[2]’ ([3]) failed to start. Verify that you have sufficient privileges to start system services.

1921

Service ‘[2]’ ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.

1922

Service ‘[2]’ ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.

1923

Service ‘[2]’ ([3]) could not be installed. Verify that you have sufficient privileges to install system services.

1924

Could not update environment variable ‘[2]’. Verify that you have sufficient privileges to modify environment variables.

1925

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.

1926

Could not set file security for file ‘[3]’. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.

1927

The installation requires COM+ Services to be installed.

1928

The installation failed to install the COM+ Application.

1929

The installation failed to remove the COM+ Application.

1930

The description for service ‘[2]’ ([3]) could not be changed.

1931

The Windows Installer service cannot update the system file [2] because the file is protected by Windows. You may need to update your operating system for this program to work correctly. Package version: [3], OS Protected version: [4]

Windows Installer protects critical system files. For more information, see
Using Windows Installer and Windows Resource Protection.
For Windows Me, see the
InstallSFPCatalogFile action,
the FileSFPCatalog table, and the
SFPCatalog table.

1932

The Windows Installer service cannot update the protected Windows file [2]. Package version: [3], OS Protected version: [4], SFP Error: [5]

Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the
SFPCatalog table.

1933

The Windows Installer service cannot update one or more protected Windows files. SFP Error: [2]. List of protected files:rn[3]

Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the
SFPCatalog table.

1934

User installations are disabled through policy on the machine.

1935

An error occurred during the installation of assembly component [2]. HRESULT: [3]. {{assembly interface: [4], function: [5], assembly name: [6]}}

For more information, see Assemblies.

Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.

1935

An error occurred during the installation of assembly ‘[6]’. Please refer to Help and Support for more information. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

For more information, see Assemblies.

Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.

Available beginning with Windows Installer for Windows Server 2003.

1936

An error occurred during the installation of assembly ‘[6]’. The assembly is not strongly named or is not signed with the minimal key length. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

For more information, see Assemblies.

Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.

Available beginning with Windows Installer for Windows Server 2003.

1937

An error occurred during the installation of assembly ‘[6]’. The signature or catalog could not be verified or is not valid. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

For more information, see Assemblies.

Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.

Available beginning with Windows Installer for Windows Server 2003.

1938

An error occurred during the installation of assembly ‘[6]’. One or more modules of the assembly could not be found. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}

For more information, see Assemblies.

Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.

Available beginning with Windows Installer for Windows Server 2003.

1939

Service ‘[2]’ ([3]) could not be configured. This could be a problem with the package or your permissions. Verify that you have sufficient privileges to configure system services.

For information, seeUsing Services Configuration.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1940

Service ‘[2]’ ([3]) could not be configured. Configuring services is supported only on Windows Vista/Server 2008 and above.

For information, seeUsing Services Configuration.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1941

Both LockPermissions and MsiLockPermissionsEx tables were found in the package. Only one of them should be present. This is a problem with the package.

A package cannot contain both the MsiLockPermissionsEx Table and the LockPermissions Table.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1942

Multiple conditions (‘[2]’ and ‘[3]’)have resolved to true while installing Object [4] (from table [5]). This may be a problem with the package.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1943

SDDL string ‘[2]’ for object [3](in table [4]) could not be resolved into a valid Security Descriptor.

See Securing Resources for information on using MsiLockPermissionsEx table.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1944

Could not set security for service ‘[3]’. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this service.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

1945

You do not have sufficient privileges to complete the re-advertisement of this product. Re-advertisement requires initiation by a local system account calling the MsiAdvertiseScript API

The process calling MsiAdvertiseScript must be running under the LocalSystem account.

Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.

2101

Shortcuts not supported by the operating system.

2102

Invalid .ini action: [2]

2103

Could not resolve path for shell folder [2].

2104

Writing .ini file: [3]: System error: [2].

2105

Shortcut Creation [3] Failed. System error: [2].

2106

Shortcut Deletion [3] Failed. System error: [2].

2107

Error [3] registering type library [2].

2108

Error [3] unregistering type library [2].

2109

Section missing for .ini action.

2110

Key missing for .ini action.

2111

Detection of running applications failed, could not get performance data. Registered operation returned : [2].

2112

Detection of running applications failed, could not get performance index. Registered operation returned : [2].

2113

Detection of running applications failed.

2200

Database: [2]. Database object creation failed, mode = [3].

2201

Database: [2]. Initialization failed, out of memory.

2202

Database: [2]. Data access failed, out of memory.

2203

Database: [2]. Cannot open database file. System error [3].

2204

Database: [2]. Table already exists: [3].

2205

Database: [2]. Table does not exist: [3].

2206

Database: [2]. Table could not be dropped: [3].

2207

Database: [2]. Intent violation.

2208

Database: [2]. Insufficient parameters for Execute.

2209

Database: [2]. Cursor in invalid state.

2210

Database: [2]. Invalid update data type in column [3].

2211

Database: [2]. Could not create database table [3].

2212

Database: [2]. Database not in writable state.

2213

Database: [2]. Error saving database tables.

2214

Database: [2]. Error writing export file: [3].

2215

Database: [2]. Cannot open import file: [3].

2216

Database: [2]. Import file format error: [3], Line [4].

2217

Database: [2]. Wrong state to CreateOutputDatabase [3].

2218

Database: [2]. Table name not supplied.

2219

Database: [2]. Invalid Installer database format.

2220

Database: [2]. Invalid row/field data.

2221

Database: [2]. Code page conflict in import file: [3].

2222

Database: [2]. Transform or merge code page [3] differs from database code page [4].

2223

Database: [2]. Databases are the same. No transform generated.

2224

Database: [2]. GenerateTransform: Database corrupt. Table: [3].

2225

Database: [2]. Transform: Cannot transform a temporary table. Table: [3].

2226

Database: [2]. Transform failed.

2227

Database: [2]. Invalid identifier ‘[3]’ in SQL query: [4].

2228

Database: [2]. Unknown table ‘[3]’ in SQL query: [4].

2229

Database: [2]. Could not load table ‘[3]’ in SQL query: [4].

2230

Database: [2]. Repeated table ‘[3]’ in SQL query: [4].

2231

Database: [2]. Missing ‘)’ in SQL query: [3].

2232

Database: [2]. Unexpected token ‘[3]’ in SQL query: [4].

2233

Database: [2]. No columns in SELECT clause in SQL query: [3].

2234

Database: [2]. No columns in ORDER BY clause in SQL query: [3].

2235

Database: [2]. Column ‘[3]’ not present or ambiguous in SQL query: [4].

2236

Database: [2]. Invalid operator ‘[3]’ in SQL query: [4].

2237

Database: [2]. Invalid or missing query string: [3].

2238

Database: [2]. Missing FROM clause in SQL query: [3].

2239

Database: [2]. Insufficient values in INSERT SQL statement.

2240

Database: [2]. Missing update columns in UPDATE SQL statement.

2241

Database: [2]. Missing insert columns in INSERT SQL statement.

2242

Database: [2]. Column ‘[3]’ repeated.

2243

Database: [2]. No primary columns defined for table creation.

2244

Database: [2]. Invalid type specifier ‘[3]’ in SQL query [4].

2245

IStorage::Stat failed with error [3].

2246

Database: [2]. Invalid Installer transform format.

2247

Database: [2] Transform stream read/write failure.

2248

Database: [2] GenerateTransform/Merge: Column type in base table does not match reference table. Table: [3] Col #: [4].

2249

Database: [2] GenerateTransform: More columns in base table than in reference table. Table: [3].

2250

Database: [2] Transform: Cannot add existing row. Table: [3].

2251

Database: [2] Transform: Cannot delete row that does not exist. Table: [3].

2252

Database: [2] Transform: Cannot add existing table. Table: [3].

2253

Database: [2] Transform: Cannot delete table that does not exist. Table: [3].

2254

Database: [2] Transform: Cannot update row that does not exist. Table: [3].

2255

Database: [2] Transform: Column with this name already exists. Table: [3] Col: [4].

2256

Database: [2] GenerateTransform/Merge: Number of primary keys in base table does not match reference table. Table: [3].

2257

Database: [2]. Intent to modify read only table: [3].

2258

Database: [2]. Type mismatch in parameter: [3].

2259

Database: [2] Table(s) Update failed

Queries must adhere to the restricted Windows Installer
SQL syntax.

2260

Storage CopyTo failed. System error: [3].

2261

Could not remove stream [2]. System error: [3].

2262

Stream does not exist: [2]. System error: [3].

2263

Could not open stream [2]. System error: [3].

2264

Could not remove stream [2]. System error: [3].

2265

Could not commit storage. System error: [3].

2266

Could not rollback storage. System error: [3].

2267

Could not delete storage [2]. System error: [3].

2268

Database: [2]. Merge: There were merge conflicts reported in [3] tables.

2269

Database: [2]. Merge: The column count differed in the ‘[3]’ table of the two databases.

2270

Database: [2]. GenerateTransform/Merge: Column name in base table does not match reference table. Table: [3] Col #: [4].

2271

SummaryInformation write for transform failed.

2272

Database: [2]. MergeDatabase will not write any changes because the database is open read-only.

2273

Database: [2]. MergeDatabase: A reference to the base database was passed as the reference database.

2274

Database: [2]. MergeDatabase: Unable to write errors to Error table. Could be due to a non-nullable column in a predefined Error table.

2275

Database: [2]. Specified Modify [3] operation invalid for table joins.

2276

Database: [2]. Code page [3] not supported by the system.

2277

Database: [2]. Failed to save table [3].

2278

Database: [2]. Exceeded number of expressions limit of 32 in WHERE clause of SQL query: [3].

2279

Database: [2] Transform: Too many columns in base table [3].

2280

Database: [2]. Could not create column [3] for table [4].

2281

Could not rename stream [2]. System error: [3].

2282

Stream name invalid [2].

2302

Patch notify: [2] bytes patched to far.

2303

Error getting volume info. GetLastError: [2].

2304

Error getting disk free space. GetLastError: [2]. Volume: [3].

2305

Error waiting for patch thread. GetLastError: [2].

2306

Could not create thread for patch application. GetLastError: [2].

2307

Source file key name is null.

2308

Destination file name is null.

2309

Attempting to patch file [2] when patch already in progress.

2310

Attempting to continue patch when no patch is in progress.

2315

Missing path separator: [2].

2318

File does not exist: [2].

2319

Error setting file attribute: [3] GetLastError: [2].

2320

File not writable: [2].

2321

Error creating file: [2].

2322

User canceled.

2323

Invalid file attribute.

2324

Could not open file: [3] GetLastError: [2].

2325

Could not get file time for file: [3] GetLastError: [2].

2326

Error in FileToDosDateTime.

2327

Could not remove directory: [3] GetLastError: [2].

2328

Error getting file version info for file: [2].

2329

Error deleting file: [3]. GetLastError: [2].

2330

Error getting file attributes: [3]. GetLastError: [2].

2331

Error loading library [2] or finding entry point [3].

2332

Error getting file attributes. GetLastError: [2].

2333

Error setting file attributes. GetLastError: [2].

2334

Error converting file time to local time for file: [3]. GetLastError: [2].

2335

Path: [2] is not a parent of [3].

2336

Error creating temp file on path: [3]. GetLastError: [2].

2337

Could not close file: [3] GetLastError: [2].

2338

Could not update resource for file: [3] GetLastError: [2].

2339

Could not set file time for file: [3] GetLastError: [2].

2340

Could not update resource for file: [3], Missing resource.

2341

Could not update resource for file: [3], Resource too large.

2342

Could not update resource for file: [3] GetLastError: [2].

2343

Specified path is empty.

2344

Could not find required file IMAGEHLP.DLL to validate file:[2].

2345

[2]: File does not contain a valid checksum value.

2347

User ignore.

2348

Error attempting to read from cabinet stream.

2349

Copy resumed with different info.

2350

FDI server error

2351

File key ‘[2]’ not found in cabinet ‘[3]’. The installation cannot continue.

2352

Could not initialize cabinet file server. The required file ‘CABINET.DLL’ may be missing.

2353

Not a cabinet.

2354

Cannot handle cabinet.

2355

Corrupt cabinet.

2356

Could not locate cabinet in stream: [2].

When troubleshooting embedded streams, you may use WiStream.vbs to list the streams and use Msidb.exe to export the streams.

2357

Cannot set attributes.

2358

Error determining whether file is in-use: [3]. GetLastError: [2].

2359

Unable to create the target file — file may be in use.

2360

Progress tick.

2361

Need next cabinet.

2362

Folder not found: [2].

2363

Could not enumerate subfolders for folder: [2].

2364

Bad enumeration constant in CreateCopier call.

2365

Could not BindImage exe file [2].

2366

User failure.

2367

User abort.

2368

Failed to get network resource information. Error [2], network path [3]. Extended error: network provider [5], error code [4], error description [6].

2370

Invalid CRC checksum value for [2] file.{ Its header says [3] for checksum, its computed value is [4].}

2371

Could not apply patch to file [2]. GetLastError: [3].

2372

Patch file [2] is corrupt or of an invalid format. Attempting to patch file [3]. GetLastError: [4].

2373

File [2] is not a valid patch file.

2374

File [2] is not a valid destination file for patch file [3].

2375

Unknown patching error: [2].

2376

Cabinet not found.

2379

Error opening file for read: [3] GetLastError: [2].

2380

Error opening file for write: [3]. GetLastError: [2].

2381

Directory does not exist: [2].

2382

Drive not ready: [2].

2401

64-bit registry operation attempted on 32-bit operating system for key [2].

2402

Out of memory.

2501

Could not create rollback script enumerator.

2502

Called InstallFinalize when no install in progress.

2503

Called RunScript when not marked in progress.

2601

Invalid value for property [2]: ‘[3]’

2602

The [2] table entry ‘[3]’ has no associated entry in the Media table.

2603

Duplicate table name [2].

2604

[2] Property undefined.

2605

Could not find server [2] in [3] or [4].

2606

Value of property [2] is not a valid full path: ‘[3]’.

2607

Media table not found or empty (required for installation of files).

2608

Could not create security descriptor for object. Error: ‘[2]’.

2609

Attempt to migrate product settings before initialization.

2611

The file [2] is marked as compressed, but the associated media entry does not specify a cabinet.

2612

Stream not found in ‘[2]’ column. Primary key: ‘[3]’.

2613

RemoveExistingProducts action sequenced incorrectly.

2614

Could not access IStorage object from installation package.

2615

Skipped unregistration of Module [2] due to source resolution failure.

2616

Companion file [2] parent missing.

2617

Shared component [2] not found in Component table.

2618

Isolated application component [2] not found in Component table.

2619

Isolated components [2], [3] not part of same feature.

2620

Key file of isolated application component [2] not in File table.

2621

Resource DLL or Resource ID information for shortcut [2] set incorrectly.

Available with Windows Installer version 4.0.

2701

The depth of a feature exceeds the acceptable tree depth of [2] levels.

The maximum depth of any feature is 16. This error is returned if a feature that exceeds the maximum depth exists.

2702

A Feature table record ([2]) references a non-existent parent in the Attributes field.

2703

Property name for root source path not defined: [2]

2704

Root directory property undefined: [2]

2705

Invalid table: [2]; Could not be linked as tree.

2706

Source paths not created. No path exists for entry [2] in Directory table.

2707

Target paths not created. No path exists for entry [2] in Directory table.

2708

No entries found in the file table.

2709

The specified Component name (‘[2]’) not found in Component table.

2710

The requested ‘Select’ state is illegal for this Component.

2711

The specified Feature name (‘[2]’) not found in Feature table.

2712

Invalid return from modeless dialog: [3], in action [2].

2713

Null value in a non-nullable column (‘[2]’ in ‘[3]’ column of the ‘[4]’ table.

2714

Invalid value for default folder name: [2].

2715

The specified File key (‘[2]’) not found in the File table.

2716

Could not create a random subcomponent name for component ‘[2]’.

May occur if the first 40 characters of two or more component names are identical. Ensure that the first 40 characters of component names are unique to the component.

2717

Bad action condition or error calling custom action ‘[2]’.

2718

Missing package name for product code ‘[2]’.

2719

Neither UNC nor drive letter path found in source ‘[2]’.

2720

Error opening source list key. Error: ‘[2]’

2721

Custom action [2] not found in Binary table stream.

2722

Custom action [2] not found in File table.

2723

Custom action [2] specifies unsupported type.

2724

The volume label ‘[2]’ on the media you’re running from does not match the label ‘[3]’ given in the Media table. This is allowed only if you have only 1 entry in your Media table.

2725

Invalid database tables

2726

Action not found: [2].

2727

The directory entry ‘[2]’ does not exist in the Directory table.

2728

Table definition error: [2]

2729

Install engine not initialized.

2730

Bad value in database. Table: ‘[2]’; Primary key: ‘[3]’; Column: ‘[4]’

2731

Selection Manager not initialized.

The selection manager is responsible for determining component and feature states. It is initialized during the costing actions (
CostInitialize action,
FileCost action, and
CostFinalize action.) A standard action or custom action made a call to a function requiring the selection manager before the initialization of the selection manager. This action should be sequenced after the costing actions.

2732

Directory Manager not initialized.

The directory manager is responsible for determining the target and source paths. It is initialized during the costing actions (CostInitialize action,
FileCost action, and
CostFinalize action). A standard action or custom action made a call to a function requiring the directory manager before the initialization of the directory manager. This action should be sequenced after the costing actions.

2733

Bad foreign key (‘[2]’) in ‘[3]’ column of the ‘[4]’ table.

2734

Invalid reinstall mode character.

2735

Custom action ‘[2]’ has caused an unhandled exception and has been stopped. This may be the result of an internal error in the custom action, such as an access violation.

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2736

Generation of custom action temp file failed: [2].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2737

Could not access custom action [2], entry [3], library [4]

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2738

Could not access VBScript run time for custom action [2].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2739

Could not access JScript run time for custom action [2].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2740

Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2741

Configuration information for product [2] is corrupt. Invalid info: [2].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2742

Marshaling to Server failed: [2].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2743

Could not execute custom action [2], location: [3], command: [4].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2744

EXE failed called by custom action [2], location: [3], command: [4].

This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.

2745

Transform [2] invalid for package [3]. Expected language [4], found language [5].

The language ID that is specified by the
ProductLanguage property must be contained in the
Template Summary property. Perform package validation and check for ICE80.

2746

Transform [2] invalid for package [3]. Expected product [4], found product [5].

2747

Transform [2] invalid for package [3]. Expected product version < [4], found product version [5].

2748

Transform [2] invalid for package [3]. Expected product version <= [4], found product version [5].

2749

Transform [2] invalid for package [3]. Expected product version == [4], found product version [5].

2750

Transform [2] invalid for package [3]. Expected product version >= [4], found product version [5].

2751

Transform [2] invalid for package [3]. Expected product version > [4], found product version [5].

2752

Could not open transform [2] stored as child storage of package [4].

2753

The File ‘[2]’ is not marked for installation.

2754

The File ‘[2]’ is not a valid patch file.

2755

Server returned unexpected error [2] attempting to install package [3].

2756

The property ‘[2]’ was used as a directory property in one or more tables, but no value was ever assigned.

2757

Could not create summary info for transform [2].

2758

Transform [2] does not contain an MSI version.

2759

Transform [2] version [3] incompatible with engine; Min: [4], Max: [5].

2760

Transform [2] invalid for package [3]. Expected upgrade code [4], found [5].

2761

Cannot begin transaction. Global mutex not properly initialized.

2762

Cannot write script record. Transaction not started.

The InstallExecuteSequence may have been authored incorrectly. Actions that change the system must be sequenced between the InstallInitialize and InstallFinalize actions. Perform package validation and check for ICE77.

2763

Cannot run script. Transaction not started.

2765

Assembly name missing from AssemblyName table : Component: [4].

2766

The file [2] is an invalid MSI storage file.

2767

No more data{ while enumerating [2]}.

2768

Transform in patch package is invalid.

2769

Custom Action [2] did not close [3] MSIHANDLEs.

The InstallExecuteSequence may have been authored incorrectly. Actions that change the system must be sequenced between the InstallInitialize and InstallFinalize actions. Perform package validation and check for ICE77.

2770

Cached folder [2] not defined in internal cache folder table.

2771

Upgrade of feature [2] has a missing component.
.

Available beginning with Windows Installer version 3.0.

2772

New upgrade feature [2] must be a leaf feature.

Available beginning with Windows Installer version 3.0.

2801

Unknown Message — Type [2]. No action is taken.

2802

No publisher is found for the event [2].

2803

Dialog View did not find a record for the dialog [2].

2804

On activation of the control [3] on dialog [2] CMsiDialog failed to evaluate the condition [3].

2805

2806

The dialog [2] failed to evaluate the condition [3].

2807

The action [2] is not recognized.

2808

Default button is ill-defined on dialog [2].

2809

On the dialog [2] the next control pointers do not form a cycle. There is a pointer from [3] to [4], but there is no further pointer.

2810

On the dialog [2] the next control pointers do not form a cycle. There is a pointer from both [3] and [5] to [4].

2811

On dialog [2] control [3] has to take focus, but it is unable to do so.

2812

The event [2] is not recognized.

2813

The EndDialog event was called with the argument [2], but the dialog has a parent

2814

On the dialog [2] the control [3] names a nonexistent control [4] as the next control.

2815

ControlCondition table has a row without condition for the dialog [2].

2816

The EventMapping table refers to an invalid control [4] on dialog [2] for the event [3].

2817

The event [2] failed to set the attribute for the control [4] on dialog [3].

2818

In the ControlEvent table EndDialog has an unrecognized argument [2].

2819

Control [3] on dialog [2] needs a property linked to it.

2820

Attempted to initialize an already initialized handler.

2821

Attempted to initialize an already initialized dialog: [2].

2822

No other method can be called on dialog [2] until all the controls are added.

2823

Attempted to initialize an already initialized control: [3] on dialog [2].

2824

The dialog attribute [3] needs a record of at least [2] field(s).

2825

The control attribute [3] needs a record of at least [2] field(s).

2826

Control [3] on dialog [2] extends beyond the boundaries of the dialog [4] by [5] pixels.

2827

The button [4] on the radio button group [3] on dialog [2] extends beyond the boundaries of the group [5] by [6] pixels.

2828

Tried to remove control [3] from dialog [2], but the control is not part of the dialog.

2829

Attempt to use an uninitialized dialog.

2830

Attempt to use an uninitialized control on dialog [2].

2831

The control [3] on dialog [2] does not support [5] the attribute [4].

2832

The dialog [2] does not support the attribute [3].

2833

Control [4] on dialog [3] ignored the message [2].

2834

The next pointers on the dialog [2] do not form a single loop.

2835

The control [2] was not found on dialog [3].

2836

The control [3] on the dialog [2] cannot take focus.

2837

The control [3] on dialog [2] wants the winproc to return [4].

2838

The item [2] in the selection table has itself as a parent.

2839

Setting the property [2] failed.

2840

Error dialog name mismatch.

2841

No OK button was found on the error dialog.

2842

No text field was found on the error dialog.

2843

The ErrorString attribute is not supported for standard dialogs.

2844

Cannot execute an error dialog if the Errorstring is not set.

2845

The total width of the buttons exceeds the size of the error dialog.

2846

SetFocus did not find the required control on the error dialog.

2847

The control [3] on dialog [2] has both the icon and the bitmap style set.

2848

Tried to set control [3] as the default button on dialog [2], but the control does not exist.

2849

The control [3] on dialog [2] is of a type, that cannot be integer valued.

2850

Unrecognized volume type.

2851

The data for the icon [2] is not valid.

2852

At least one control has to be added to dialog [2] before it is used.

2853

Dialog [2] is a modeless dialog. The execute method should not be called on it.

2854

On the dialog [2] the control [3] is designated as first active control, but there is no such control.

2855

The radio button group [3] on dialog [2] has fewer than 2 buttons.

2856

Creating a second copy of the dialog [2].

2857

The directory [2] is mentioned in the selection table but not found.

2858

The data for the bitmap [2] is not valid.

2859

Test error message.

2860

Cancel button is ill-defined on dialog [2].

2861

The next pointers for the radio buttons on dialog [2] control [3] do not form a cycle.

2862

The attributes for the control [3] on dialog [2] do not define a valid icon size. Setting the size to 16.

2863

The control [3] on dialog [2] needs the icon [4] in size [5]x[5], but that size is not available. Loading the first available size.

2864

The control [3] on dialog [2] received a browse event, but there is no configurable directory for the present selection. Likely cause: browse button is not authored correctly.

2865

Control [3] on billboard [2] extends beyond the boundaries of the billboard [4] by [5] pixels.

2866

The dialog [2] is not allowed to return the argument [3].

2867

The error dialog property is not set.

2868

The error dialog [2] does not have the error style bit set.

2869

The dialog [2] has the error style bit set, but is not an error dialog.

2870

The help string [4] for control [3] on dialog [2] does not contain the separator character.

2871

The [2] table is out of date: [3].

2872

The argument of the CheckPath control event on dialog [2] is invalid.

Where «CheckPath» can be the
CheckTargetPath,
SetTargetPath or the
CheckExistingTargetPath control
events.

2873

On the dialog [2] the control [3] has an invalid string length limit: [4].

2874

Changing the text font to [2] failed.

2875

Changing the text color to [2] failed.

2876

The control [3] on dialog [2] had to truncate the string: [4].

2877

The binary data [2] was not found

2878

On the dialog [2] the control [3] has a possible value: [4]. This is an invalid or duplicate value.

2879

The control [3] on dialog [2] cannot parse the mask string: [4].

2880

Do not perform the remaining control events.

2881

CMsiHandler initialization failed.

2882

Dialog window class registration failed.

2883

CreateNewDialog failed for the dialog [2].

2884

Failed to create a window for the dialog [2].

2885

Failed to create the control [3] on the dialog [2].

2886

Creating the [2] table failed.

2887

Creating a cursor to the [2] table failed.

2888

Executing the [2] view failed.

2889

Creating the window for the control [3] on dialog [2] failed.

2890

The handler failed in creating an initialized dialog.

2891

Failed to destroy window for dialog [2].

2892

[2] is an integer only control, [3] is not a valid integer value.

2893

The control [3] on dialog [2] can accept property values that are at most [5] characters long. The value [4] exceeds this limit, and has been truncated.

2894

Loading RICHED20.DLL failed. GetLastError() returned: [2].

2895

Freeing RICHED20.DLL failed. GetLastError() returned: [2].

2896

Executing action [2] failed.

2897

Failed to create any [2] font on this system.

2898

For [2] textstyle, the system created a ‘[3]’ font, in [4] character set.

2899

Failed to create [2] textstyle. GetLastError() returned: [3].

2901

Invalid parameter to operation [2]: Parameter [3].

2902

Operation [2] called out of sequence.

May indicate that the installation of Win32 assemblies was authored incorrectly. A Win32 side-by-side component may need a key path.

2903

The file [2] is missing.

2904

Could not BindImage file [2].

2905

Could not read record from script file [2].

2906

Missing header in script file [2].

2907

Could not create secure security descriptor. Error: [2].

2908

Could not register component [2].

2909

Could not unregister component [2].

2910

Could not determine user’s security ID.

2911

Could not remove the folder [2].

2912

Could not schedule file [2] for removal on restart.

2919

No cabinet specified for compressed file: [2].

2920

Source directory not specified for file [2].

2924

Script [2] version unsupported. Script version: [3], minimum version: [4], maximum version: [5].

2927

ShellFolder id [2] is invalid.

2928

Exceeded maximum number of sources. Skipping source ‘[2]’.

2929

Could not determine publishing root. Error: [2].

2932

Could not create file [2] from script data. Error: [3].

2933

Could not initialize rollback script [2].

2934

Could not secure transform [2]. Error [3].

2935

Could not unsecure transform [2]. Error [3].

2936

Could not find transform [2].

2937

Windows Installer cannot install a system file protection catalog. Catalog: [2], Error: [3].

Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the
SFPCatalog table.

2938

Windows Installer cannot retrieve a system file protection catalog from the cache. Catalog: [2], Error: [3].

Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the
SFPCatalog table.

2939

Windows Installer cannot delete a system file protection catalog from the cache. Catalog: [2], Error: [3].

Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the
SFPCatalog table.

2940

Directory Manager not supplied for source resolution.

2941

Unable to compute the CRC for file [2].

2942

BindImage action has not been executed on [2] file.

2943

This version of Windows does not support deploying 64-bit packages. The script [2] is for a 64-bit
package.

2944

GetProductAssignmentType failed.

2945

Installation of ComPlus App [2] failed with error [3].

3001

The patches in this list contain incorrect sequencing information:
[2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].

Available beginning with Windows Installer version 3.0

3002

Patch [2] contains invalid sequencing information.

Available beginning with Windows Installer version 3.0