Error 3 accessing source directory

RoboCopy giving error in universal file path

I am conducting some Arduino HID research. I was trying to set my Leo to open powershell and make a back up of all the .pdfs in my Documents folders to a flash drive by volume name.

I want this to be portable to different machines. So a specified file path that includes a username can not be used.

The original script I found is this one.

The Problem I am having is that when I pass the path of C:users$env:usernameDocuments Powershell throws an error stating.

Next i tried removing the $srcDIR parameter and specifying the path in a variable with the new script looking like this:

That failed as well giving me the another path error apparently robocopy is imputing my username twice seen here:

So I edited the last line to include a direct path and no varible.

The output gave a different results that confuses me more than the rest of the issues. Have a look:

The reason why it is so confusing is because these directories that robocopy tried to copy do not exist within my documents folder nor flash drive. C:UsersmeDocuments

C:UsersmeDocumentsMy Music C:UsersmeDocumentsMy Pictures F:My Pictures

So i am completely stumped and came here to ask the pros for some assistance. I have also tried %USERNAME% and %USERPROFILE% in the file path using the same script variations i stated above but that didn’t work either due to robocopy assuming they was part of the actual path name. I.E. C:users%USERPROFILE%Documents

So to conclude I need to be able to plug a named volume flash drive into my pc. Insert my Arduino have it type out a command in CMD, POWERSHELL, or create a .ps1 in notepad but the issue i am having is with the source directory path not being recognized when not using a specific user name in the path which is not possible due to my need to have this portable across machines and users.

Источник

Error 3 accessing source directory

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Error 3 accessing source directory

Вопрос

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Error 3 accessing source directory

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Error 3 accessing source directory

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

PS H:> scoop install 7zip
Installing '7zip' (18.01) [64bit]
Loading 7z1801-x64.msi from cache
Checking hash of 7z1801-x64.msi... ok.
Extracting... Error moving directory:
 -------------------------------------------------------------------------------    ROBOCOPY     ::     Robust File Cop
y for Windows                               ---------------------------------------------------------------------------
----    Started : Thu Apr 26 19:58:03 2018     Source : C:Usersmyuserscoopapps7zip18.01_tmpFiles7-Zip      D
est : C:Usersmyuserscoopapps7zip18.01      Files : *.*            Options : *.* /S /E /COPY:DAT /MOVE /R:100000
0 /W:30   ------------------------------------------------------------------------------  2018/04/26 19:58:03 ERROR 3 (
0x00000003) Accessing Source Directory C:Usersmyuserscoopapps7zip18.01_tmpFiles7-Zip The system cannot find
the path specified.
At C:Usersmyuserscoopappsscoopcurrentlibcore.ps1:249 char:9
+         throw "Error moving directory: `n$out"
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OperationStopped: (Error moving di...ath specified. :String) [], RuntimeException
    + FullyQualifiedErrorId : Error moving directory:
     -------------------------------------------------------------------------------    ROBOCOPY     ::     Robust Fil
   e Copy for Windows                               -----------------------------------------------------------------
  --------------    Started : Thu Apr 26 19:58:03 2018     Source : C:Usersmyuserscoopapps7zip18.01_tmpFile
 s7-Zip      Dest : C:Usersmyuserscoopapps7zip18.01      Files : *.*            Options : *.* /S /E /COPY:DA
   T /MOVE /R:1000000 /W:30   ------------------------------------------------------------------------------  2018/04
  /26 19:58:03 ERROR 3 (0x00000003) Accessing Source Directory C:Usersmyuserscoopapps7zip18.01_tmpFiles7-Z
 ip The system cannot find the path specified.

Hi All,

Cleaning up after a ransomware event. Thankfully all caught early and good backups in place. To save me restoring a whole drive, I’ve been trying to get robocopy to copy files out of a shadow copy from 1 hour before the event to a new folder. Firstly I subst the shadowcopy folder as Z:. Then I run robocopy commands but it says: The system cannot find the path specified relating the z:. Any help would be greatly appreciated here as the script should take ten minutes to complete vs a nightmare scenario of restoring drives and pulling changed files from backups.

The commands I’ve been using are:

Powershell

subst z: \localhostB$TimestampFolder

# Note that z: drive only shows in explorer if this command is not run as administrator. Also it shows as disconnected in explorer but it be browsed as normal.

robocopy z: x:test *.xls *.xlsx *.doc *.docx /COPYALL /S MAXAGE:MMDDYYYY /R:2 /W:2

# The error is "ERROR 3 (0x00000003) Accessing Source Directory z: The system cannot find the path specified."

Any help is massively appreciated and if it helps my laptop colour is black.

Robocopy error 3 0x00000003

Профиль | Сайт | Отправить PM | Цитировать

Доброго времени суток, господа. Подскажите, мне нужно копировать все содержимое из папки А в папку Б. Копировать открытые файлы или системные и продолжать копирование при ошибке и так далее. Наткнулся на утилиту robocopy. Хотел создать батник и запихнуть его в службы, но вот незадача, при запуске батника пишет вот такую штуку :

Параметры: *.* /S /E /DCOPY:DA /COPY:DAT /PURGE /MIR /Z /R:1000000 /W:30

2020/09/25 12:37:36 ОШИБКА 3 (0x00000003) Доступ к исходной папке C:Users╨Т╨╕╤В╨░╨╗╨╕╨╣Desktop╨а╨░╨▒╨╛╤В╨░╨Ъ╨╛╨┐╨╕╤А╨╛╨▓╨░╨╜╨╕╨╡ ╨┐╨░╨▒╨░╨в╨╡╤Б╤В ╨╛╤В ╤Б╤О╨┤╨░
Системе не удается найти указанный путь.

Вывод, не может найти указанный путь. НО! Если я вставляю тот же код батника просто в CMD, там все прекрасно работает и копируется).

Вот исходный код батника:
robocopy «C:UsersВиталийDesktopРаботаКопирование пабаТест от сюда» «C:UsersВиталийDesktopРаботаКопирование пабаТест сюда» /MIR /Z

Подскажите, где ошибаюсь и почему из батника не работает, а если код вставить в командную строку, все работает.

» width=»100%» style=»BORDER-RIGHT: #719bd9 1px solid; BORDER-LEFT: #719bd9 1px solid; BORDER-BOTTOM: #719bd9 1px solid» cellpadding=»6″ cellspacing=»0″ border=»0″>

Сообщения: 191
Благодарности: 112

нужно копировать все содержимое из папки А в папку Б »

Сообщения: 2576
Благодарности: 1605

Вложения

——-
Даже самая сложная проблема обязательно имеет простое, лёгкое для понимания, неправильное решение. Каждое решение плодит новые проблемы.

Последний раз редактировалось megaloman, 25-09-2020 в 12:41 .

Это сообщение посчитали полезным следующие участники:

	Батник.txt
(880 байт, 13 просмотров)

» width=»100%» style=»BORDER-RIGHT: #719bd9 1px solid; BORDER-LEFT: #719bd9 1px solid; BORDER-BOTTOM: #719bd9 1px solid» cellpadding=»6″ cellspacing=»0″ border=»0″>

Сообщения: 2576
Благодарности: 1605

——-
Даже самая сложная проблема обязательно имеет простое, лёгкое для понимания, неправильное решение. Каждое решение плодит новые проблемы.

Это сообщение посчитали полезным следующие участники:

Как обойти проблему с удалением открытых файлов? »

» width=»100%» style=»BORDER-RIGHT: #719bd9 1px solid; BORDER-LEFT: #719bd9 1px solid; BORDER-BOTTOM: #719bd9 1px solid» cellpadding=»6″ cellspacing=»0″ border=»0″>

Сообщения: 793
Благодарности: 259

Источник

Techies Sphere

A platform for sharing technical knowledge.

Pages

Tuesday, 28 June 2016

ERROR 3 (0x00000003) Getting File System — Robocopy

Robocopy Error:
Started : Tuesday, June 28, 2016 10:15:37 AM
2016/06/28 10:15:37 ERROR 3 (0x00000003) Getting File System Type of Destination Z:MyFolder
The system cannot find the path specified.

Solution:
The Solution worked for me is, I have given full path of destination folder instead of giving mapped drive path of destination folder.

Examples (1):
ROBOCOPY E:MyFolder Z:MyFolder /E /ZB /SEC /R:3 /W:3 /TEE /LOG+:C:FileServerCopy.txt

Its failed with above error, because I was using destination shared path as a mapped drive (Z:).

Examples (2):
ROBOCOPY E:MyFolder \myipaddresssharedfolderMyFolder /E /ZB /SEC /R:3 /W:3 /TEE /LOG+:C:FileServerCopy.txt

It worked like charm, because I am using full path of my destination shared folder.

Update: 12/05/2017

IMP Notes: In most common scenario, we get encountered by errors in two conditions:

1. Not using CMD as (Run as Administrator).

What to do? Yes, you should use robocopy command on CMD prompts with «Run as Administrator».

2. The folder path we are using is having some space in folder name (like folder name Finance Department, Production Daily Report etc..).

What to do? If you are having folder path with some folders name having space, you should try to quote the source and destination path with commas.

Example:
ROBOCOPY «\myserverpublic foldershared folder name» «\myipaddresssharedfolderMy Folder»

Cheers, Please write me back if you have any query or feedback..

I keep getting no summary no matter what version of robocopy I used.

Just some untitled numbers:
1 0 0 0 17 17 0 0 0 0 4.21 m 4.21 m 0 0 0 0

When I google around, all I see is others have same issue go read the switches and output log. I already read word by word everywhere. Even I took just the default:

robocopy «from» «to»

Still no summary. What am I missing?

I try batch, if I have multiple start robocopy in my batch, some work, some doesn’t. Why?

Источник

Robocopy error 3 0x00000003

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Robocopy error 3 0x00000003

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Robocopy error 3 0x00000003

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

So I am really new to Powershell and just yesterday learned about Robocopy.

I have been trying to find a solution to this problem:

I wrote a script in Powershell that is to simulate a «Backup». It should copy files, using Robocopy, from user specified folders on a server to a user specified location elsewhere.

Right now, I have been testing it various ways.

1) One way I tried testing it was mapping the server’s location as a network drive. I currently have it as drive V:.
Whenever I run the script, I get this error:

Get-Item: Cannot find drive. A drive with the name ‘V’ does not exist.
ERROR 3 (0x00000003) Accessing Source Directory V:
The System cannot find the path specified.

I’m using Robocopy like this: robocopy $spath $newFolder /COPY:DAT /b

2) The first time I tried test my script, I was trying to access directly to the server. $spath = \###.###.##.###
Whenver I tried this, this is the error I got:

Get-Item : Cannot find path ‘\###.###.##.###’ because it does not exist.
ERROR 5 (0x00000005) Accessing Source Directory \###.###.##.##
Access is denied.

I am running Powershell as an administrator, on the administrator account on this computer (It’s just for testing, but it’s a Windows 7 desktop).
Any ideas?

Edit: The destination path is a hard drive that we have connected USB 2.0

Источник

Adblock
detector