Error 8000 reading sector - Исправление ошибок и поиск оптимальных решений проблем

Forum
The Ubuntu Forum Community
Ubuntu Official Flavours Support
Installation & Upgrades
[ubuntu] EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive found

EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive found

Hello,
I am try to install ubuntu 12.04 i386 server.
but am running into some problems.
first
i am try to install on a SuperMicro SuperServer6022P-6.
it has 3 hard drives in it (2 and 3 are the same kind)
1. HITACHI 36 gb
2. IBM 18.4 gb
3.IBM 18.4 gb
it also has Adaptec Raid Controller (asr — 2000s /48 mb).
If you need more info just let me know.
next
i am try to install ubuntu 12.04 i386 from a live boot cd.
i downloaded ubuntu from their web site and burn the iso image to the disc i want to use.
then i place it in the supermicro compact disc slot.
i then boot up the supermicro and it just go to a black screen with the flashing curser and then it give me an ERROR (EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive found!)
and then it sits on a black screen with the word boot: and a flashing curser after it.
not sure on what to do here.
any help would be great.
Thanks Every One!
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

The EDD-error only appears for CD drives. Have you tried booting from USB?

Bringing old hardware back to life. About problems due to upgrading.
Please visit Quick Links -> Unanswered Posts.
Don’t use this space for a list of your hardware. It only creates false hits in the search engines.
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Ya i have try to but it cant find it on boot. kinda like it does not have the abilities to.

Last edited by Metrik; June 15th, 2013 at 09:07 PM.
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Can you install using the minimal ISO?

Bringing old hardware back to life. About problems due to upgrading.
Please visit Quick Links -> Unanswered Posts.
Don’t use this space for a list of your hardware. It only creates false hits in the search engines.
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

What exactly did you try to install?

Bringing old hardware back to life. About problems due to upgrading.
Please visit Quick Links -> Unanswered Posts.
Don’t use this space for a list of your hardware. It only creates false hits in the search engines.
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Have you checked the checksum? Have you tried a different CD reader?
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

12.04 Precise Pangolin 32 bit non PAE.

Thanks for the Reply m�rg�s

Last edited by Metrik; June 24th, 2013 at 10:14 PM.
Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

How do You use checksum? and no but i will try a different cd reader.
Thanks for the Reply gordintoronto

Tags for this Thread

Bookmarks

Posting Permissions

Источник

Debian User Forums

won’t boot install disc

#1 Post by redbaron62 » 2011-07-03 01:41

I am trying to install debian on a compaq presario 6000. When I try to boot off of the first dvd it just won’t do anyting most of the time; one flat line keeps blinking. The first time that I booted it, there was that line that starts with isolinux, but that was only there the first time. now nothing shows up. That first time, I got several error messages:

EDD: error 8000 reading sector 1360652

and the same thing 5 times over with different numbers at the end. Do these mean that the disc is corrupt in some way, or that the dvd reader is broken or something else?

Re: won’t boot install disc

#2 Post by jheaton5 » 2011-07-03 02:06

Re: won’t boot install disc

#3 Post by redbaron62 » 2011-07-03 15:36

here is what I got for the file. (I’ve never used this tool before; I couldn’t figure out how to check the disk)

unfortunately I cannot find any way to confirm this (the ones online are for 6.0.2.1)

Re: won’t boot install disc

#4 Post by jheaton5 » 2011-07-03 19:00

There is a md5sum file at the location where you downloaded the .iso. The number in the file and result of the md5sum on the .iso should match.

Edit: If they match, make sure your BIOS is set to boot from the dvd drive.

Re: won’t boot install disc

#5 Post by redbaron62 » 2011-07-03 19:15

I looked online for them before where I downloaded them (http://cdimage.debian.org/debian-cd/6.0 . 86/bt-dvd/) and they were not the same files that I downloaded. The ones that I downloaded were like: debian-6.0.1a-i386-DVD-1.iso.torrent and the ones that were on the site were like: debian-6.0.2.1-i386-DVD-1.iso.torrent. I would not be surprised if it is not set to boot off the dvd, but that would make me curious as to why it won’t boot windows (which is still on there); that is what it does if there is no disk.

Another thing I did is try booting off the disk on the computer that I made the dvd on, and it worked fine.

Re: won’t boot install disc

#6 Post by jheaton5 » 2011-07-03 19:19

redbaron62 wrote: I looked online for them before where I downloaded them (http://cdimage.debian.org/debian-cd/6.0 . 86/bt-dvd/) and they were not the same files that I downloaded. The ones that I downloaded were like: debian-6.0.1a-i386-DVD-1.iso.torrent and the ones that were on the site were like: debian-6.0.2.1-i386-DVD-1.iso.torrent. I would not be surprised if it is not set to boot off the dvd, but that would make me curious as to why it won’t boot windows (which is still on there); that is what it does if there is no disk.

Another thing I did is try booting off the disk on the computer that I made the dvd on, and it worked fine.

I agree with you. Try to set the boot order in the BIOS to boot the DVD drive first.

I don’t understand the issue with Windows not booting.

Re: won’t boot install disc

#7 Post by redbaron62 » 2011-07-03 20:20

Re: won’t boot install disc

#8 Post by jheaton5 » 2011-07-03 21:33

Re: won’t boot install disc

#9 Post by redbaron62 » 2011-07-03 22:55

Re: won’t boot install disc

#10 Post by kiyop » 2011-07-03 23:17

Maybe bad DVD reader (drive)?

Re: won’t boot install disc

#11 Post by jheaton5 » 2011-07-04 02:41

Re: won’t boot install disc

#12 Post by redbaron62 » 2011-07-04 15:50

I cannot tell if the md5sums are correct; but I am assuming that they are given that I downloaded it twice and got the same md5sum.

Basically that is correct.

Re: won’t boot install disc

#13 Post by jheaton5 » 2011-07-04 16:59

Re: won’t boot install disc

#14 Post by redbaron62 » 2011-07-04 23:27

Re: won’t boot install disc

#15 Post by kiyop » 2011-07-05 04:18

Re: won’t boot install disc

#16 Post by snover » 2011-07-16 23:05

I have a similar problem. I’m trying to install Debian squeeze on my desktop computer. DVD disc burned with disk utility on macintel won’t boot just like USB stick created with UNetbootin.
I can’t check the DVD, because I have a DVD drive only on my desktop computer (the one I’m trying to install Debian to).
USB flash drive is ok, because it boots on my friend’s eeePC, BIOS config is fine too, because it boots ubuntu from USB stick and from a DVD.

So the problem seems to be on the Debian side.

Re: won’t boot install disc

#17 Post by kiyop » 2011-07-17 05:53

snover wrote: I have a similar problem. I’m trying to install Debian squeeze on my desktop computer. DVD disc burned with disk utility on macintel won’t boot just like USB stick created with UNetbootin.
I can’t check the DVD, because I have a DVD drive only on my desktop computer (the one I’m trying to install Debian to).
USB flash drive is ok, because it boots on my friend’s eeePC, BIOS config is fine too, because it boots ubuntu from USB stick and from a DVD.

So the problem seems to be on the Debian side.

If you need some help to solve your problem, you should write most information on your computer and on what you did (where you downloaded DVD image, and so forth).

Источник

Error 8000 — Installing Ubuntu on an old PC with bootable DVD

Is there an ISO file with less than 700 MB?
I cannot put the ISO file ‘ubuntu-12.04.3-desktop-i386’ with 707 MB on CD having only 700 MB. I tried to make a bootable DVD but when booting PC says:

EDD: Error 8000 reading sector 50

(and then 51,52,53 etc) and then boot failed ...

2 Answers 2

Try to burn with another CD but do not use CD-RW (it might be a faulty burned disc).

You can find CD releases for 12.04 here: http://releases.ubuntu.com/precise/ But you do need an 80 minutes CD (those are a bit over 700M).

Do you have an USB port on the machine? If so see: «How to create a bootable USBstick on Windows» as an alternative.
Another method: download the server and manually add the desktop. Server is 665M so will fit.

Oh and as of 12.10 a CD is no longer an option.

You can try to install the 11.10 an older version of Ubuntu (695MB), and then update & upgrade & dist-upgrade the system.

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник

Troubleshooting Linux Mint Install: Error 8000 reading sector .

Chris679

Reputable

Scenario:
Windows XP took a plunge & don’t have original CD to reinstall. So decided to install a new OS to replace the broken windows XP. I downloaded the ISO image for Linux Mint Qiana and tried a USB boot using the Universal USB Installer to no avail.

Current Situation:
Burned Linux ISO image to DVD and trying to boot from CD however I get a «error 8000 reading sector . No default UI or configuration found»

Questions:
Is it the DVD disk?
Do I need to use a proper burn ISO software? If so, any suggestions?
Do i need to try sth like this? (Click here for link)
Is it a compatibility issue?
What else can I do?

__________________________________________________________

Machine Specs:
— HP Compaq dc7600 Small Form Factor
— Pentuim 4 with 512MB RAM and 40GB HDD
___________________________________________________________

Many Thanks!
New User.

pacific27

Distinguished

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Not sure what the problem may be but Linux mint comes in both 64-bit and 32-bit iso images. Obviously your P4 system would use the 32-bit iso image. May want to verify you downloaded the correct image.

That being said with your system and the amount of RAM it has you may want to explore lighter weight Linux Distros. Don’t get me wrong Mint is a great distro but with your system specs it may be sluggish or may not never tried it on my P4 system.

http://lubuntu.net/
You may want to check out Lubuntu which is made with a much lighter weight desktop UI and may have better performance on your system. Lubuntu should be be a pretty automatic install.

http://www.slitaz.org/en/about/
I still have my old P4 system and used to run SliTaz Linux. Very minimal distro but it ran really well on that older hardware. I was surprised how fast it ran. My system has 2.5gb RAM but don’t think it would make much of a difference with SliTaz as it’s made to run on minimal hardware. SliTaz will take a little bit of knowledge to get running as you will have to partition your HDD for your swap/root/home directories but i believe most of the information you would need is on their website. SliTaz only comes in 32-bit

pacific27

Distinguished

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Chris679

Reputable

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Much thanks for responding to this thread. The problem was with the DVD burner program I used, I’ve used your suggestion but by that time Id already figured an install via USB. but PowerISO did work.

yea, I downloaded a 32-bit ofcourse and its running the installation now..I’ll try it out and if it doesnt work for this machine then I’ll check Lubuntu

Источник

I downloaded the ISO Centos 6.5 i386 and burned it onto a disk. When I try to install it on my computer, I get the following with

install or upgrade an existing system

.loading vmlinuz..EDD: Error 8000 reading sector 16929
.EDD: Error 8000 reading sector 17176
.EDD: Error 8000 reading sector 17746
.
Loading initrd.img.......................

Then I allowed it to boot from the local drive. The same thing happened again. It doesn;t seem to be getting anywhere.

asked Mar 23, 2014 at 19:07

This is provoked by errors in the disk. Should verify the downloaded ISO and burn the CD again, maybe reduce the speed. If disks doesn’t work, maybe you should try USB instead.

answered Mar 23, 2014 at 19:46

BraiamBraiam

34.8k25 gold badges107 silver badges165 bronze badges

Insert the non-working DVD and run md5sum /dev/sr0. It’ll report the md5sum and if it matches with the ISO md5sum, the DVD was burned correctly. If it does not match, there was some problem with the burn process. If you get any input/output errors while running md5sum, it’s a proof that some parts of the DVD were unreadable.

answered Mar 25, 2014 at 9:42

pravin09pravin09

2923 silver badges13 bronze badges

Источник

Troubleshooting Linux Mint Install: Error 8000 reading sector ….

Thread starter

Chris679
Start date

Aug 13, 2014

: May 20, 2014

: 33

: 0

: 4,540

: 4

Current Situation:
Burned Linux ISO image to DVD and trying to boot from CD however I get a «error 8000 reading sector ….. No default UI or configuration found»

Questions:
Is it the DVD disk?
Do I need to use a proper burn ISO software? If so, any suggestions?
Do i need to try sth like this? (Click here for link)
Is it a compatibility issue?
What else can I do?

Many Thanks!
New User.

: Sep 7, 2009

: 111

: 0

: 18,690

: 4

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Good Luck

: Sep 7, 2009

: 111

: 0

: 18,690

: 4

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Good Luck

: May 20, 2014

: 33

: 0

: 4,540

: 4

I personally use PowerISO and its free. I’ve never had any problems after burning an iso image.

Good Luck

yea, I downloaded a 32-bit ofcourse and its running the installation now..I’ll try it out and if it doesnt work for this machine then I’ll check Lubuntu

Thanx!

Thread starter	Similar threads	Forum	Replies	Date
	Question Second monitor making my pc crash??	Systems	2	Yesterday at 8:38 AM
	Question Troubleshooting my PC does not turn on	Systems	2	Feb 1, 2023
	Question i9 13900kf Z690 Boot Issues	Systems	6	Jan 31, 2023
P	Question Troubleshooting my PC build: crashing browsers, distorted images and chirping audio ?	Systems	0	Jan 20, 2023
X	Question PC has no display/usb after reinstalling CPU	Systems	3	Jan 15, 2023
X	Question Troubleshooting a new PC build	Systems	5	Jan 14, 2023
	Question Troubleshooting issues when it won’t send anything to the monitor	Systems	2	Jan 12, 2023
	[SOLVED] PC suddenly shuts off after 15 minutes of gameplay — NOT overheating	Systems	22	Jan 9, 2023
R	Question Motherboard LEDs turn on but system won’t boot ?	Systems	3	Jan 7, 2023
R	Question Nearly every game crashes within seconds of launching ?	Systems	1	Jan 3, 2023

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

Источник

Is there an ISO file with less than 700 MB?
I cannot put the ISO file ‘ubuntu-12.04.3-desktop-i386’ with 707 MB on CD having only 700 MB.
I tried to make a bootable DVD but when booting PC says:

EDD: Error 8000 reading sector 50

(and then 51,52,53 etc) and then boot failed ...

Filbuntu

11.5k34 gold badges84 silver badges108 bronze badges

asked Jan 6, 2014 at 11:21

Try to burn with another CD but do not use CD-RW (it might be a faulty burned disc).

You can find CD releases for 12.04 here: http://releases.ubuntu.com/precise/ But you do need an 80 minutes CD (those are a bit over 700M).

Do you have an USB port on the machine? If so see: «How to create a bootable USBstick on Windows» as an alternative.
Another method: download the server and manually add the desktop. Server is 665M so will fit.

Oh and as of 12.10 a CD is no longer an option.

answered Jan 6, 2014 at 11:34

RinzwindRinzwind

288k39 gold badges561 silver badges701 bronze badges

You can try to install the 11.10 an older version of Ubuntu (695MB), and then update & upgrade & dist-upgrade the system.

answered Jan 6, 2014 at 11:37

Источник

Forum rules
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.

Adriansky

Problem with installation Linux Mint

Hi, I have a problem, I wanted to install Linux Mint 15 Cinnamon 32-bit. Linux Mint automatic boot appears, and after this 10 seconds it freezes. I thought, it is something loading, so I left this like it was. After 10-20 minutes screen went black and this appeared:

EDD: Error 8000 reading sector 472149

Invalid or corrupt kernel image.
boot:
EDD: Error 8000 reading sector 2098

Disc is well burned, I think. I’ve installed Linux Mint 15 from it on another computer and after this 10 seconds installation started and system works perfect.. Please help

Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.

Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.

nerdtron

Re: Problem with installation Linux Mint

Post

by nerdtron » Tue Aug 13, 2013 10:44 pm

Preflight Checklist just to make sure that your media is good.
Are you sure the downloaded Mint ISO is complete?
Have you tried to use other DVD?
Have you tried it to other computer?
You can try «burning» the Mint ISO in a flash drive and use it as the installer. http://unetbootin.sourceforge.net/
Also what is the specs of your computer? Does it have UEFI?

Adriansky

Re: Problem with installation Linux Mint

Post

by Adriansky » Wed Aug 14, 2013 4:43 am

Oh I’ve solved it. My cd-dvd drive was broken, computer is very old, so it can’t boot from usb by the way :/ Thanks for help.

Источник

This bug report was converted into a question:
question #209043:
EDD: Error 8000 reading sector 355425.

This bug affects 1 person

Affects	Status	Importance	Assigned to	Milestone
	ubiquity (Ubuntu)	Invalid	Undecided	Unassigned

Affects

Status

Importance

Assigned to

Milestone

ubiquity (Ubuntu)

Invalid

Undecided

Unassigned

Bug Description

Dia boot ubuntu khi toi cai thi xuat hien loi nhu the nay EDD: Error 8000 reading sector 355425

affects:	installation-guide (Ubuntu) → ubiquity (Ubuntu)
Changed in ubiquity (Ubuntu):
status:	New → Invalid

To post a comment you must log in.

Report a bug

This report contains
Public
information

Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.

Источник

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="https://ubuntuforums.org/images/icons/icon5.png" alt="Question" /> EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive found

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Re: EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive fou

Tags for this Thread

Bookmarks

Bookmarks

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" src="https://ubuntuforums.org/images/ubuntu-VB4/buttons/collapse_40b.png" alt /> Posting Permissions

Debian User Forums

won’t boot install disc

won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Re: won’t boot install disc

Error 8000 — Installing Ubuntu on an old PC with bootable DVD

2 Answers 2

Related

Hot Network Questions

Subscribe to RSS

Troubleshooting Linux Mint Install: Error 8000 reading sector .

Chris679

Reputable

pacific27

Distinguished

pacific27

Distinguished

Chris679

Reputable

Troubleshooting Linux Mint Install: Error 8000 reading sector ….

Problem with installation Linux Mint

Re: Problem with installation Linux Mint

Re: Problem with installation Linux Mint

Bug Description

Other bug subscribers

Remote bug watches

Читайте также:

EDD:Error 8000 reading sector 330958 No DEFAULT or UI configuration directive found

Posting Permissions