Error app 258550 state is 0x202 after update job

Error failed to install app 258550 no subscription

ENGLISH:
When i try to create a dedicated server for rust experimental, this error appears «Failed to install app ‘258550’ «
And when i write force_install_dir C:SteamCMDrust_server this directory isn’t created in local disk.
What is the solution for this??

ESPAÑOL:
Cuando trato de crar un servidor decicado para el rust experimental, me aparece este error «Failed to install app ‘258550’ «.
Y cuando escribo force_install_dir C:SteamCMDrust_server el directorio no se crea en el disco local C ni en ningun lado.
¿Cuál es la solucion para este problema?

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Thank you, kind sir.:goldsmile:

I WAS TRYING TO DO THE SAME. and i logged as anonymouse.. but when i entered app_update 258550 -beta legacy. i saw a message: Error! App 258550 state is 0x202 after update job. what can i do? 🙁

it means you dont have enough storage

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

How did you determine the number was 258550?

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Источник

Error failed to install app 258550 no subscription

Hello, I was experimenting with SteamCMD last night and this morning to get it to install my rust server into my SteamCMDsteamappscommon, and i have now come up with a fix!

1. Download steamCMD
2. Make a folder on your desktop named SteamCMD
3. Extract the steamcmd application to the SteamCMD folder you just made
4. Run SteamCMD
5. close SteamCMD
6. Look at the path of getting to the common folder in your SteamCMD folder, this should be: C:Users(Your Computer Username here)DesktopSteamCMDsteamappscommon (e.g. C:UsersJordanDesktopSteamCMDsteamappscommon
7. Run SteamCMD again
8. type into SteamCMD: login anonymous
9. type into SteamCMD: force_install_dir C:Users(computer username here)DesktopSteamCMDsteamappscommonrust_server

The extra bit on the end named «rust_server» creates the folder where all the server files will be installed in the «common» directory.

10. type into SteamCMD: app_update 258550 -beta experimental validate
11. This will now install all the server files inside the rust_server directory you just created with the SteamCMD command
12. This is optional: When it has finished installing create a shortcut to your desktop or another folder, right click on the shortcut, click properties, then go to target line, and type in it (after EVERYTHING in the target line, make a space too after everything) -batchmode

Now you have your own server, just double click the application on your desktop or in the folder, and it will start in the windows CMD application

I will make another guide to make yourself owner and to make other moderators on your server!

Thank you for reading, i hope this fixes the problem!

Источник

Error failed to install app 258550 no subscription

ENGLISH:
When i try to create a dedicated server for rust experimental, this error appears «Failed to install app ‘258550’ «
And when i write force_install_dir C:SteamCMDrust_server this directory isn’t created in local disk.
What is the solution for this??

ESPAÑOL:
Cuando trato de crar un servidor decicado para el rust experimental, me aparece este error «Failed to install app ‘258550’ «.
Y cuando escribo force_install_dir C:SteamCMDrust_server el directorio no se crea en el disco local C ni en ningun lado.
¿Cuál es la solucion para este problema?

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Thank you, kind sir.:goldsmile:

I WAS TRYING TO DO THE SAME. and i logged as anonymouse.. but when i entered app_update 258550 -beta legacy. i saw a message: Error! App 258550 state is 0x202 after update job. what can i do? 🙁

it means you dont have enough storage

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

How did you determine the number was 258550?

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Years later, but this is the solution (commands below):
1. login anonymous
2. app_update 258550 validate

Источник

Error failed to install app 258550 no subscription

1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.

Все очень просто не правда ли?

Ну да .
Только вот сейчас около 1к серверов
что то подсказывает что есть ешё один способ

Видно ешё оди тк вчера видел как школьник бегал по серверу и рекламил свой сервер с 5 0 слотами

1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.

Все очень просто не правда ли?

Ооочень остроумно. Если не считать что он доступен для каждого, по заявлению самого Гарри. И если не тренировать сарказм, то можно ответить человеку, что ошибка ERROR! Failed to install app 258550 (No subscription) появляется когда логинишься в CMD под собственным логпасом. Так что все проще.

1. Открываешь SteamCMD
2. login anonymous
3. app_update 258550 -beta experimental validate
4. Success! App ‘258550’ fully installed.

Источник

Talk:SteamCMD

Contents

steamCMD cannot connect to internet

I get in my CMD the error the steamCMD cannot connect to internet. I have connection to the internet but I am not able to login into the SteamCMD. I am in centOS and I am not logged in into the normal steam client or site
uname -a Linux vpstyasvrb 2.6.32-220.el6.x86_64 #1 SMP x86_64 x86_64 x86_64 GNU/Linux

) to sign your username.

steamcmd appupdate glitch

When I try to download a new server it does not put the files in the specified directory, I am not even sure it is installing them at all. How do I fix this? I do:

• login anonymous
• force_install_dir C:UsersAdministratorDesktopAwesome land updatedgarrysmod
• app_update 4020 validate

What am I doing wrong? —Unsigned comment added by XXthatNAVYguyXx (talk • contribs). Please use four tildes (

) to sign your username.

Using steam and steamcmd simultaneous

When it’s time to update a server where i need to log in , i need a logout of steam (cannont play a game)

Anything is possible for fix that (starbound) —Unsigned comment added by Thesweetiger (talk • contribs). Please use four tildes (

) to sign your username.

Exit codes

Is there a list of exit codes & means for steamcmd?

For some reason, if a game is up2date it exits with exit code6

Liv3d @ 08:14, 12 November 2012 (PST)

ia32-libs

On Ubuntu, the Package Group ia32-libs-gtk is now called ia32-libs .

Tomcek November 27, 2012, 21:14 (GMT+1)

Invalid Platform

I seem to be getting: ERROR! Failed to install app ‘220070’ (Invalid Platform)

I’m using Fedora 17. uname -a returns: Linux localhost.localdomain 3.6.10-2.fc17.i686 #1 SMP Tue Dec 11 18:27:35 UTC 2012 i686 i686 i386 GNU/Linux

Other people seem to be getting this error as well, though I’m not too sure what distro they’re using. I’ll try it again in the morning with Ubuntu.

—Bheesham 00:39, 2 January 2013 (PST)

Poor Documentation Doesn’t Help Linux

The documentation here takes some tinkering with to get things working.

And some doesn’t even work.

First, to clarify, app ID is the valve app ID for the game. There should be a link to the app ID list somewhere (although they list CSGO in the example.

Second, to automate SteamCMD do xxx.

SteamCMD is not really a command. You can’t just run SteamCMD although it makes it look like you should. I guess you have to run steam.sh every time although I’m still vague on this step.

I’ll set an update script however, I don’t know what command to kick it off with. These instructions should take nothing for granted.

I never thought I’d say this but I miss the hlds tool. —Unsigned comment added by Sideslope (talk • contribs). Please use four tildes (

) to sign your username.

You’re absolutely right! I added a link to the Steam AppID list and I clarified the steamcmd / ./steam.sh step in Automating SteamCMD. Lonaowna 06:12, 6 January 2013 (PST)

Supported Games for Anonymous Login

Hesitant to link on the page since it’s not an official link (even though pointing to official data), but an always updated list of games that support the new anonymous login can be found at http://cdr.thebronasium.com/sub/apps/17906 (or at any of the other various cdr listing sites)

Problem

Im not sure. im putting on a new server to Steam and No Steam, i uploaded the «app_update 90 -beta beta validate» (the steamCMD.exe is in a folder in desk, not in Valve) is that correct? should i run the HDLS in the folder that steamCMD downloaded? What i need to do for run the server, please somebody i need really help.

thanks —Unsigned comment added by Andor28 (talk • contribs). Please use four tildes (

) to sign your username.

BugslayerUtil.dll not found!

Hello, before I begin I would just like to point out that I’m new with how Discussion pages work, and so I ask for your patience if I do anything erroneous.

When I attempt to run SteamCMD.exe to update it, I notice that I get the following:

[ 0%] Checking for available updates.

Steam_: BugslayerUtil.DLL not found

Steam Console Client (c) Valve Corporation

— type ‘quit’ to exit —

Loading Steam3. OK.

Loading Steam2. OK.

I would like to know if there is some way to fix this, or if I have done something wrong, or if this is even a problem at all!

—Kytosai 15:58, 16 June 2013 (PDT)

Windows requires Internet settings set to automatic

While doing some fiddling with srcds on Windows 8 I found I had to enable «Automatically detect settings» settings under Internet Properties -=> Connections -> LAN settings, otherwise steamcmd would gripe about not being able to connect (http error 0). Don’t have the actual errors off hand.

—Foobar 19:56, 1 July 2013 (PDT)

Warning in steamcmd.sh

I got this with the steamcmd in the package : steamcmd.sh: 16: [: unexpected operator steamcmd.sh: 16: [: unexpected operator

All work correctly but I want to have clear log —Unsigned comment added by Maxaille (talk • contribs). Please use four tildes (

) to sign your username.

Linux example code

Any questions related to the example code of linux, can be directed to me on the Steam community. —Roelof 14:50, 26 July 2013 (PDT)

Validate doesn’t work

Since there are no documentation, it’s impossible to bug track it, if you use the validate option the game will be downloaded again. The function/routine that check/verify the consistency of every file is unknown, how it generates the hashes? SteamCMD requires an specific filesystem to use its ‘validate’ function?

—HellMind 11:43, 30 August 2013 (PDT)

ERROR! Failed to install app ‘xxxxxx’ (No subscription)

i enter my login and passwor it say success but when i enter app_update 258550 i get error —Unsigned comment added by Mr.BorisBritva (talk • contribs). Please use four tildes (

) to sign your username.

Steamcmd does not update — sits on 0.00 of 0.00 etc.

I have a network server (runs off 1st router), my and other pc’s then of that using 2nd router.

Steamcmd was working on server and now does not load updates for games (pretty much since ARK was released). Updating games got really slow and now will not update at all.

I have search forums, set automatic detect settings, reloaded steam, reloaded steamcmd, redone firewalls, routers, main box and to NO change.

My pc I have been able to get one game to update (took about an hour to tick through). I have put another server on 1st router and set that up and same thing. NO UPDATING.

WHAT IS WRONG WITH STEAMCMD? Downloading works ok as program itself updates and loads when 1st setup. Steam downloads ok. BUT NOT BLOODY STEAMCMD!!

Even thou I have set IE auto detect setting I do not use IE as a browser. (The server side also has TCADMIN on it.)

This is driving me mad. Any solutions? —Unsigned comment added by JungleNZ (talk • contribs). Please use four tildes (

) to sign your username.

Support Raspbery Pi

I think that there is a need to port SteamCmd on ARM-platform, «Raspberian» in particular OSes.

Advantages: Raspberry Pi — a computer of low power consumption (a few watts). It is advantageous to make download games for linux / windows on such a computer, as opposed to personal computers, consuming much more energy.

I also have a NAS (on the x86 platform, the power consumption of about 22 watts), and I can not download anything.

The problem is in the SSL work. SteamCMD presupposes the existence of an installed package «ca-certificates», but I can not install it. NAS have own linux-system, nothing similar to the Debian / Ubuntu. I do not know how to put the package «ca-certificates» on an generic Linux system. —Unsigned comment added by Yaroslav (talk • contribs). Please use four tildes (

) to sign your username.

Default App Directory

Recent versions (since around 3/20/2016, give or take) of steamcmd (on CentOS 7) seem to have changed their default app_update behavior and may cause confusion. Has anyone else experienced the following behavior when NOT specifying force_install_dir?

I previously had SteamCMD installed as

/steamcmd/steamcmd.sh, and apps would install/update to

/Steam/. I ran app_update yesterday, and it downloaded a whole new copy of an installed app to

/steamapps/. I created a fresh SteamCMD install as

/steam-cmd/steamcmd.sh, and apps installed/updated to

/Steam/. I renamed

/steamcmd/, and apps began to install/update to

/steamcmd/. I now have SteamCMD installed to

/steam-cmd/ to force the old behavior, because I consider it to be a standalone tool — not part of a Steam installation.

If this can be confirmed, I would like to volunteer (or ask for a seasoned editor) to add a brief section covering default app_update behavior.

(I’m sure this would be better off on an issue tracker somewhere, but there doesn’t seem to be one and people on Github get upset when someone talks about SteamCMD on other Valve project trackers. If someone knows of an appropriate channel to report this quirky behavior, I would appreciate a pointer.)

Zyxw (talk) 18:08, 26 March 2016 (UTC)

Network Problems in JailChroot linux

I have problems for initial update run in jailchroot installation under linux (ubuntu 16.04).

«SteamUpdater: Error: Steam needs to be online to update. Please confirm your network connection and try again.»

As you can see, the jail has no problems to accessing at internet, since you can execute commands like ping, host, whois, wget, etc. But steamcmd has problems for downloading the initial update that allows to run the TF2 server.

steamcmd issue [not able to download all files]

what to do i am not able to download all files through steamcmd

i have tried by manually putting appmanifest file but still same

Thanks —Unsigned comment added by Indra26 (talk • contribs). Please use four tildes (

) to sign your username.

running the app_run command for SteamCMD gives ERROR

Im currently trying to use the commands provided by SteamCMD on a windows machine.

These are the commands I did:

downloaded the steamcmd zip. unzipped it.

opened the steamcmd by running: steamcmd

logged into steam using: login

did this to install the game I wanted: app_update

then finally, after it finished installing I ran: app_run

I keep getting the error: ERROR! AppId launch failed (Dependency failure)

Can someone please help me get this to work? What other dependency/steps am I missing?

Источник

I am still having this issue. I just pulled your image to today, ran it, and got the above error on Windows 10 with 5.5GB of RAM for Docker. Docker runs fine and volume appears to be mounted properly. Is this fix not yet released?
CPU usage gets a little high but ram gets no where near the max as I watch the container stats.

╔═════════════════════════════════════════════════╗
║    _____  _     _     _              _          ║
║   |  __ (_)   | |   | |            (_)         ║
║   | |  | |_  __| |___| |_ ___  _ __  _  __ _    ║
║   | |  | | |/ _| / __| __/ _ | |_ | |/ _| |   ║
║   | |__| | | (_| __  || (_) | |_) | | (_| |   ║
║   |_____/|_|__|_|___/_____/| |__/|_|__|_|   ║
║                               | |               ║
║                               |_|               ║
╠═════════════════════════════════════════════════╣
║ You are using an image that is based on         ║
║ a base image maintained by Didstopia.           ║
║                                                 ║
║ For more information:                           ║
║ https://github.com/Didstopia/docker-base-images ║
╚═════════════════════════════════════════════════╝


Running as user: docker
Installing/updating steamcmd..
x linux32/
x linux32/libstdc++.so.6
x linux32/steamcmd
x steamcmd.sh
x steam.sh
Installing or updating Rust.. (this might take a while, be patient)
Redirecting stderr to '/app/Steam/logs/stderr.txt'
[  0%] Checking for available updates...
[  0%] Downloading update (0 of 76,818 KB)...
[  0%] Downloading update (882 of 76,818 KB)...
[  1%] Downloading update (2,677 of 76,818 KB)...
[  3%] Downloading update (4,867 of 76,818 KB)...
[  6%] Downloading update (7,688 of 76,818 KB)...
[ 10%] Downloading update (10,075 of 76,818 KB)...
[ 13%] Downloading update (12,463 of 76,818 KB)...
[ 16%] Downloading update (15,093 of 76,818 KB)...
[ 19%] Downloading update (17,505 of 76,818 KB)...
[ 22%] Downloading update (19,918 of 76,818 KB)...
[ 25%] Downloading update (22,054 of 76,818 KB)...
[ 28%] Downloading update (24,546 of 76,818 KB)...
[ 31%] Downloading update (26,973 of 76,818 KB)...
[ 35%] Downloading update (29,395 of 76,818 KB)...
[ 38%] Downloading update (31,622 of 76,818 KB)...
[ 41%] Downloading update (33,695 of 76,818 KB)...
[ 43%] Downloading update (35,531 of 76,818 KB)...
[ 46%] Downloading update (37,133 of 76,818 KB)...
[ 48%] Downloading update (39,309 of 76,818 KB)...
[ 51%] Downloading update (41,739 of 76,818 KB)...
[ 54%] Downloading update (43,038 of 76,818 KB)...
[ 56%] Downloading update (44,400 of 76,818 KB)...
[ 57%] Downloading update (45,770 of 76,818 KB)...
[ 59%] Downloading update (47,023 of 76,818 KB)...
[ 61%] Downloading update (48,275 of 76,818 KB)...
[ 62%] Downloading update (49,528 of 76,818 KB)...
[ 64%] Downloading update (50,914 of 76,818 KB)...
[ 66%] Downloading update (52,181 of 76,818 KB)...
[ 67%] Downloading update (53,448 of 76,818 KB)...
[ 69%] Downloading update (54,842 of 76,818 KB)...
[ 71%] Downloading update (56,115 of 76,818 KB)...
[ 73%] Downloading update (57,397 of 76,818 KB)...
[ 74%] Downloading update (58,678 of 76,818 KB)...
[ 76%] Downloading update (60,088 of 76,818 KB)...
[ 78%] Downloading update (61,370 of 76,818 KB)...
[ 79%] Downloading update (62,664 of 76,818 KB)...
[ 81%] Downloading update (63,960 of 76,818 KB)...
[ 83%] Downloading update (65,386 of 76,818 KB)...
[ 85%] Downloading update (66,682 of 76,818 KB)...
[ 86%] Downloading update (67,986 of 76,818 KB)...
[ 88%] Downloading update (69,428 of 76,818 KB)...
[ 90%] Downloading update (70,738 of 76,818 KB)...
[ 92%] Downloading update (72,049 of 76,818 KB)...
[ 93%] Downloading update (73,360 of 76,818 KB)...
[ 95%] Downloading update (74,818 of 76,818 KB)...
[ 97%] Downloading update (76,143 of 76,818 KB)...
[ 99%] Downloading update (76,818 of 76,818 KB)...
[100%] Download complete.
[----] Installing update...
[----] Extracting package...
[----] Extracting package...
[----] Extracting package...
[----] Extracting package...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Cleaning up...
[----] Update complete, launching %appname%...
Redirecting stderr to '/app/Steam/logs/stderr.txt'
[  0%] Checking for available updates...
[----] Downloading update (28 of 51,208 KB)...
[  0%] Downloading update (1,139 of 51,208 KB)...
[  2%] Downloading update (2,611 of 51,208 KB)...
[  5%] Downloading update (4,549 of 51,208 KB)...
[  8%] Downloading update (6,573 of 51,208 KB)...
[ 12%] Downloading update (9,102 of 51,208 KB)...
[ 17%] Downloading update (11,434 of 51,208 KB)...
[ 22%] Downloading update (14,000 of 51,208 KB)...
[ 27%] Downloading update (16,352 of 51,208 KB)...
[ 31%] Downloading update (18,713 of 51,208 KB)...
[ 36%] Downloading update (21,074 of 51,208 KB)...
[ 41%] Downloading update (23,435 of 51,208 KB)...
[ 45%] Downloading update (25,810 of 51,208 KB)...
[ 50%] Downloading update (28,437 of 51,208 KB)...
[ 55%] Downloading update (30,831 of 51,208 KB)...
[ 60%] Downloading update (32,025 of 51,208 KB)...
[ 62%] Downloading update (33,349 of 51,208 KB)...
[ 65%] Downloading update (34,558 of 51,208 KB)...
[ 67%] Downloading update (35,767 of 51,208 KB)...
[ 69%] Downloading update (36,976 of 51,208 KB)...
[ 72%] Downloading update (38,311 of 51,208 KB)...
[ 74%] Downloading update (39,535 of 51,208 KB)...
[ 77%] Downloading update (40,758 of 51,208 KB)...
[ 79%] Downloading update (41,981 of 51,208 KB)...
[ 81%] Downloading update (43,330 of 51,208 KB)...
[ 84%] Downloading update (44,565 of 51,208 KB)...
[ 87%] Downloading update (45,802 of 51,208 KB)...
[ 89%] Downloading update (47,039 of 51,208 KB)...
[ 91%] Downloading update (48,402 of 51,208 KB)...
[ 94%] Downloading update (49,654 of 51,208 KB)...
[ 96%] Downloading update (50,905 of 51,208 KB)...
[ 99%] Downloading update (51,208 of 51,208 KB)...
[100%] Download complete.
[----] Installing update...
[----] Extracting package...
[----] Extracting package...
[----] Extracting package...
[----] Extracting package...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Installing update...
[----] Cleaning up...
[----] Update complete, launching Steamcmd...
Redirecting stderr to '/app/Steam/logs/stderr.txt'
[  0%] Checking for available updates...
[----] Verifying installation...
Steam Console Client (c) Valve Corporation
-- type 'quit' to exit --
Loading Steam API...Warning: failed to init SDL thread priority manager: SDL not found
OK.
@sSteamCmdForcePlatformType linux
"@sSteamCmdForcePlatformType" = "linux"

Connecting anonymously to Steam Public...Logged in OK
Waiting for user info...OK
force_install_dir /steamcmd/rust
app_info_update 1
app_update 258550 validate
 Update state (0x5) verifying install, progress: 0.00 (23041 / 5419992681)
 Update state (0x5) verifying install, progress: 2.74 (148330205 / 5419992681)
 Update state (0x5) verifying install, progress: 9.31 (504846045 / 5419992681)
 Update state (0x5) verifying install, progress: 16.36 (886527709 / 5419992681)
 Update state (0x5) verifying install, progress: 22.29 (1208346557 / 5419992681)
 Update state (0x5) verifying install, progress: 29.41 (1594222525 / 5419992681)
 Update state (0x5) verifying install, progress: 35.99 (1950738365 / 5419992681)
 Update state (0x5) verifying install, progress: 42.72 (2315642813 / 5419992681)
 Update state (0x5) verifying install, progress: 49.44 (2679907638 / 5419992681)
 Update state (0x5) verifying install, progress: 56.18 (3044812086 / 5419992681)
 Update state (0x5) verifying install, progress: 63.10 (3420202294 / 5419992681)
 Update state (0x5) verifying install, progress: 69.63 (3773717122 / 5419992681)
 Update state (0x5) verifying install, progress: 76.16 (4128135810 / 5419992681)
 Update state (0x5) verifying install, progress: 83.17 (4507720322 / 5419992681)
 Update state (0x5) verifying install, progress: 90.06 (4881013378 / 5419992681)
 Update state (0x5) verifying install, progress: 94.80 (5138020803 / 5419992681)
 Update state (0x5) verifying install, progress: 98.85 (5357448177 / 5419992681)
 Update state (0x61) downloading, progress: 0.00 (0 / 6476288)
 Update state (0x61) downloading, progress: 0.00 (0 / 6476288)
 Update state (0x61) downloading, progress: 0.00 (0 / 6476288)
 Update state (0x101) committing, progress: 0.00 (0 / 6476288)
Success! App '258550' fully installed.
quit
CWorkThreadPool::~CWorkThreadPool: work processing queue not empty: 1 items discarded.
Downloading and installing latest Oxide..
x RustDedicated_Data/
x RustDedicated_Data/Managed/
x RustDedicated_Data/Managed/Assembly-CSharp.dll
x RustDedicated_Data/Managed/Facepunch.Console.dll
x RustDedicated_Data/Managed/Facepunch.Network.dll
x RustDedicated_Data/Managed/Facepunch.Rcon.dll
x RustDedicated_Data/Managed/Mono.Data.Tds.dll
x RustDedicated_Data/Managed/MySql.Data.dll
x RustDedicated_Data/Managed/NewAssembly.dll
x RustDedicated_Data/Managed/Oxide.Core.dll
x RustDedicated_Data/Managed/Oxide.CSharp.dll
x RustDedicated_Data/Managed/Oxide.MySql.dll
x RustDedicated_Data/Managed/Oxide.References.dll
x RustDedicated_Data/Managed/Oxide.Rust.dll
x RustDedicated_Data/Managed/Oxide.SQLite.dll
x RustDedicated_Data/Managed/Oxide.Unity.dll
x RustDedicated_Data/Managed/System.Configuration.Install.dll
x RustDedicated_Data/Managed/System.Data.dll
x RustDedicated_Data/Managed/System.Data.SQLite.dll
x RustDedicated_Data/Managed/System.Drawing.dll
x RustDedicated_Data/Managed/System.Runtime.Serialization.dll
x RustDedicated_Data/Managed/System.Transactions.dll
x RustDedicated_Data/Managed/x64/
x RustDedicated_Data/Managed/x64/libmonoboehm-2.0.so.1
x RustDedicated_Data/Managed/x64/libMonoPosixHelper.so
x RustDedicated_Data/Managed/x64/libsqlite3
x RustDedicated_Data/Managed/x64/libsqlite3.so
x RustDedicated_Data/Managed/x64/sqlite3.dll
x RustDedicated_Data/Managed/x86/
x RustDedicated_Data/Managed/x86/libmonoboehm-2.0.so.1
x RustDedicated_Data/Managed/x86/libMonoPosixHelper.so
x RustDedicated_Data/Managed/x86/libsqlite3
x RustDedicated_Data/Managed/x86/libsqlite3.so
x RustDedicated_Data/Managed/x86/mono-2.0.dll
x RustDedicated_Data/Managed/x86/msvcp140.dll
x RustDedicated_Data/Managed/x86/msvcr120.dll
x RustDedicated_Data/Managed/x86/sqlite3.dll
Starting web server..
Log rotation disabled!
Disabling internal stdout/stderr logging!
Starting Rust..
Found path: /steamcmd/rust/RustDedicated
Unable to open log file, exiting.
Exiting..

0x202 after update job

When I try to install a server for garry’s mod i get this error in the SteamCMD

Login as anonymous instead.

Login as anonymous instead.

Tried that, still does not work. what should i do now?

Tried that, still does not work. what should i do now?

Can you explain how it doesn’t work?

Can you explain how it doesn’t work?

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

it shows the same error

Doesn’t make sense, because I just tested it myself and it’s working fine.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

mine dosent work

Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK

Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.

Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)

Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂

Источник

0x202 after update job

I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:

Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»

I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?

Edit:
Maybe this can help?

applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk

Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:

Источник

0x202 after update job

I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:

Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»
I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?

Edit:
Maybe this can help?

applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk

Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:

Steam>app_update 740 validate
Update state (0x1) running, progress: 100.00 (6540282208 / 6540282208)
Error! App ‘740’ state is 0x602 after update job.

Источник

Name already in use

LinuxGSM-Docs / steamcmd / errors.md

• Go to file T
• Go to line L
• Copy path
• Copy permalink

Copy raw contents

Copy raw contents

SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.

SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202 .

Seems to affect HLDS based servers. Running again often fixes the issue

Not enough disk space.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

Not enough disk space.

Connection issue with steam, you will need to wait for the steam servers to recover.

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

<% hint style=»info» %>Unknown error, if you have any details please let us know

<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.

SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.

<% hint style=»warning» %>Missing content_log.txt if you have it please let us know.

No connection to content servers.

To get more info and output see the SteamCMD logs in

/.steam/logs . The most useful log is content_log.txt that will provide more information on errors.

<% hint style=»success» %>If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.

SteamCMD Hex Codes

SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514 . You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error

512 StateUpdateRunning , 2 StateUpdateRequired

This table is from 2015 and is probably outdated now but it’s the best we currently have.

ulimit SteamCMD startup error

Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:

ERROR! Failed to install app » (No subscription)

The Steam account being used does not have a license for the required game.

ERROR! Password check for AppId returned error Failure.

The password for the branch is incorrect.

[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.

Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.

Loading Steam API. Failed to init SDL priority manager: SDL not found

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

CWorkThreadPool: work processing queue not empty: 2 items discarded.

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Failed to set thread priority: per-thread setup failed

Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.

Источник