| description |
|---|
|
Common |
Error Codes
SteamCMD
SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.
SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202.
Codes
Error 0x10E
Seems to affect HLDS based servers. Running again often fixes the issue
Error! App '90' state is 0x10E after update job.
| Reason | Error! App ’90’ state is 0x10E after update job. | |
|---|---|---|
| Hex | 0x10E | Reason |
| Decimal/StateFlags | 270 | Hex |
{% file src=»../.gitbook/assets/content_log_0x10E (1).txt» %}
Error 0x202
Not enough disk space.
Error! App '<appid_number>' state is 0x202 after update job.
| Reason | Not enough disk quota |
|---|---|
| Hex | 0x202 |
| Decimal/StateFlags | 514 |
{% file src=»../.gitbook/assets/content_log.txt» %}
Error 0x206
{% hint style=»info» %}
Unknown error, if you have any details please let us know
{% endhint %}
Error! App '<appid_number>' state is 0x206 after update job.
| Reason | |
| Hex | 0x206 |
| Decimal/StateFlags | 518 |
{% hint style=»warning» %}
Missing content_log.txt if you have experienced this error and have a log please let us know.
{% endhint %}
Error 0x212
Not enough disk space.
Error! App '<appid_number>' state is 0x212 after update job.
| Title | Title |
|---|---|
| Reason | Not enough disk space |
| Hex | 0x212 |
| Decimal/StateFlags | 530 |
{% file src=»../.gitbook/assets/content_log_0x212.txt» %}
Error 0x402
Connection issue with steam, you will need to wait for the steam servers to recover.
Error! State is 0x402 after update job.
| Reason | Connection issue |
|---|---|
| Hex | 0x402 |
| Decimal/StateFlags | 1026 |
{% hint style=»warning» %}
Missing content_log.txt if you have experienced this error and have a log please let us know.
{% endhint %}
Error 0x602
{% hint style=»info» %}
Unknown error, if you have any details please let us know
{% endhint %}
Error! State is 0x602 after update job.
| Reason | |
| Hex | 0x602 |
| Decimal/StateFlags | 1538 |
{% hint style=»warning» %}
Missing content_log.txt if you have experienced this error and have a log please let us know.
{% endhint %}
Error 0x606
SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.
Error! App '<appid_number>' state is 0x606 after update job.
| Reason | Disk write failure |
| Hex | 0x606 |
| Decimal/StateFlags | 1542 |
{% file src=»../.gitbook/assets/content_log (2).txt» %}
Error 0x2
Error! App '<appid_number>' state is is 0x2 after update job.
| Reason | |
|---|---|
| Hex | 0x2 |
| Decimal/StateFlags | 2 |
{% hint style=»warning» %}
Missing content_log.txt if you have it please let us know.
{% endhint %}
Error 0x6
No connection to content servers.
Error! App '<appid_number>' state is 0x6 after update job.
| Reason | No connection to content servers |
|---|---|
| Reason 2 | Received 401 (Unauthorized) HTTP response for depot 11 |
| Hex | 0x6 |
| Decimal/StateFlags | 6 |
{% file src=»../.gitbook/assets/content_log (1).txt» %}
{% file src=»../.gitbook/assets/content_log_0x6-2 (2).txt» %}
0x3
Update state (0x3) reconfiguring, progress: 0.00 (0 / 0)
0x5
Update state (0x5) validating, progress: 13.48 (1554089956 / 11530459441)
0x11
Update state (0x11) preallocating, progress: 8.53 (983870089 / 11530459441)
0x61
Update state (0x61) downloading, progress: 1.11 (127644881 / 11530459441)
0x101
Update state (0x101) committing, progress: 3.43 (395043827 / 11530459441)
SteamCMD Logs
To get more info and output see the SteamCMD logs in ~/.local/share/Steam/logsor ~/.steam/logs. The most useful log is content_log.txt that will provide more information on errors.
{% hint style=»success» %}
If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.
{% endhint %}
SteamCMD Hex Codes
SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514. You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error
514-512-2=0
512 StateUpdateRunning , 2 StateUpdateRequired
| StateInvalid | 0 |
|---|---|
| StateUninstalled | 1 |
| StateUpdateRequired | 2 |
| StateFullyInstalled | 4 |
| StateEncrypted | 8 |
| StateLocked | 16 |
| StateFilesMissing | 32 |
| StateAppRunning | 64 |
| StateFilesCorrupt | 128 |
| StateUpdateRunning | 256 |
| StateUpdateRunning | 512 |
| StateUpdateStarted | 1024 |
| StateUninstalling | 2048 |
| StateBackupRunning | 4096 |
| StateReconfiguring | 65536 |
| StateValidating | 131072 |
| StateAddingFiles | 262144 |
| StatePreallocating | 524288 |
| StateDownloading | 1048576 |
| StateStaging | 2097152 |
| StateCommitting | 4194304 |
| StateUpdateStopping | 8388608 |
This table is from 2015 and is probably outdated now but it’s the best we currently have.
{% embed url=»https://github.com/lutris/lutris/blob/master/docs/steam.rst» %}
ulimit SteamCMD startup error
./steamcmd.sh: line 17: ulimit: open files: cannot modify limit: Operation not permitted
Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:
ERROR! Failed to install app ‘<appid_number>’ (No subscription)
The Steam account being used does not have a license for the required game.
ERROR! Password check for AppId <appid_number> returned error Failure.
The password for the branch is incorrect.
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.
Loading Steam API…Failed to init SDL priority manager: SDL not found
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
CWorkThreadPool::~CWorkThreadPool: work processing queue not empty: 2 items discarded.
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Failed to set thread priority: per-thread setup failed
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.
SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202.
Seems to affect HLDS based servers. Running again often fixes the issue
Error! App ’90’ state is 0x10E after update job.
|
Error! App ’90’ state is 0x10E after update job. |
|
Error! App ‘<appid_number>’ state is 0x202 after update job.
Unknown error, if you have any details please let us know
Error! App ‘<appid_number>’ state is 0x206 after update job.
Missing content_log.txt if you have experienced this error and have a log please let us know.
Error! App ‘<appid_number>’ state is 0x212 after update job.
Connection issue with steam, you will need to wait for the steam servers to recover.
Error! State is 0x402 after update job.
Missing content_log.txt if you have experienced this error and have a log please let us know.
Unknown error, if you have any details please let us know
Error! State is 0x602 after update job.
Missing content_log.txt if you have experienced this error and have a log please let us know.
SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.
Error! App ‘<appid_number>’ state is 0x606 after update job.
Error! App ‘<appid_number>’ state is is 0x2 after update job.
Missing content_log.txt if you have it please let us know.
No connection to content servers.
Error! App ‘<appid_number>’ state is 0x6 after update job.
|
No connection to content servers |
|
|
Received 401 (Unauthorized) HTTP response for depot 11 |
|
content_log_0x6-2.txt
52KB
Update state (0x3) reconfiguring, progress: 0.00 (0 / 0)
Update state (0x5) validating, progress: 13.48 (1554089956 / 11530459441)
Update state (0x11) preallocating, progress: 8.53 (983870089 / 11530459441)
Update state (0x61) downloading, progress: 1.11 (127644881 / 11530459441)
Update state (0x101) committing, progress: 3.43 (395043827 / 11530459441)
To get more info and output see the SteamCMD logs in ~/.local/share/Steam/logsor ~/.steam/logs. The most useful log is content_log.txt that will provide more information on errors.
If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.
SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514. You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error
512 StateUpdateRunning , 2 StateUpdateRequired
|
StateInvalid |
0 |
|
StateUninstalled |
1 |
|
StateUpdateRequired |
2 |
|
StateFullyInstalled |
4 |
|
StateEncrypted |
8 |
|
StateLocked |
16 |
|
StateFilesMissing |
32 |
|
StateAppRunning |
64 |
|
StateFilesCorrupt |
128 |
|
StateUpdateRunning |
256 |
|
StateUpdateRunning |
512 |
|
StateUpdateStarted |
1024 |
|
StateUninstalling |
2048 |
|
StateBackupRunning |
4096 |
|
StateReconfiguring |
65536 |
|
StateValidating |
131072 |
|
StateAddingFiles |
262144 |
|
StatePreallocating |
524288 |
|
StateDownloading |
1048576 |
|
StateStaging |
2097152 |
|
StateCommitting |
4194304 |
|
StateUpdateStopping |
8388608 |
This table is from 2015 and is probably outdated now but it’s the best we currently have.
ulimit SteamCMD startup error
ulimit SteamCMD startup error
./steamcmd.sh: line 17: ulimit: open files: cannot modify limit: Operation not permitted
Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:
ERROR! Failed to install app ‘<appid_number>’ (No subscription)
ERROR! Failed to install app ‘<appid_number>’ (No subscription)
The Steam account being used does not have a license for the required game.
ERROR! Password check for AppId <appid_number> returned error Failure.
ERROR! Password check for AppId <appid_number> returned error Failure.
The password for the branch is incorrect.
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.
Loading Steam API…Failed to init SDL priority manager: SDL not found
Loading Steam API…Failed to init SDL priority manager: SDL not found
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
CWorkThreadPool::~CWorkThreadPool: work processing queue not empty: 2 items discarded.
CWorkThreadPool::~CWorkThreadPool: work processing queue not empty: 2 items discarded.
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Failed to set thread priority: per-thread setup failed
Failed to set thread priority: per-thread setup failed
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Содержание
- Error failed to install app 240 no subscription
- Error failed to install app 240 no subscription
- Error failed to install app 240 no subscription
- ERROR! Failed to install app ‘232250’
- TrojanCS
- KorDen
- TrojanCS
- The Night Fury
- Николай Головин
- Name already in use
- LinuxGSM-Docs / steamcmd / errors.md
Error failed to install app 240 no subscription
So after the new steampipe updates It’s led me to ‘steamCMD’ to install/update my server. Problem is if I type «240» I get the actual counter-strike source GAME rather than the SERVER.
So what’s the appID for the actual server?
I am having a similar issue updating my CSS server, but the error is different. The following happens;
Initial App state (0x2) update required
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
Error! App ‘232330’ state is 0x1 after update job.
My update script is as follows;
«c:srcdssteamcmd.exe» +login anonymous +app_update 232330 +quit
What am I missing?
For those still having issues installing, try this:
app_update 232330 validate
It worked for me atleast it got rid of all the problems I had.
C:UsersAdministratorDesktopSteam>steamcmd.exe +login anonymous
Redirecting stderr to ‘C:UsersAdministratorDesktopSteamlogsstderr.txt’
Looks like steam didn’t shutdown cleanly, scheduling immediate update check
[] Checking for available updates.
[—-] Verifying installation.
Steam_: BugslayerUtil.DLL not found
Steam Console Client (c) Valve Corporation
— type ‘quit’ to exit —
Loading Steam3. OK.
Loading Steam2. OK.
Connecting anonymously to Steam Public. Success.
Steam>app_update 232330 validate
Initial App state (0x2) update required
App state (0x10102) reconfiguring, progress: 0.00 (0 / 0)
App state (0x80102) preallocating, progress: 33.40 (755053468 / 2260486941)
And it did finish before someones asks, I didn’t want to post an extremely long log.
Источник
Error failed to install app 240 no subscription
When I try to install a server for garry’s mod i get this error in the SteamCMD
Login as anonymous instead.
Login as anonymous instead.
Tried that, still does not work. what should i do now?
Tried that, still does not work. what should i do now?
Can you explain how it doesn’t work?
Can you explain how it doesn’t work?
it shows the same error
Doesn’t make sense, because I just tested it myself and it’s working fine.
it shows the same error
Doesn’t make sense, because I just tested it myself and it’s working fine.
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂
Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK
Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.
mine dosent work
Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK
Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂
Источник
Error failed to install app 240 no subscription
1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.
Все очень просто не правда ли?
Ну да .
Только вот сейчас около 1к серверов
что то подсказывает что есть ешё один способ
Видно ешё оди тк вчера видел как школьник бегал по серверу и рекламил свой сервер с 5 0 слотами
1. Заработать много денег
2. Организовать свою крупную хостинговую фирму.
3. Выслать письмо с планом хостинга и соглашением на имя Garry Newman или на адресс Facepunch Studios
4. Дождаться ответа
5. В ответе узнать код доступа для скачивания Dedicated сервера
6. Установить SteamCMD на сервер
7. Ввести код доступа для скачивания и скачать сервер.
8. Запустить сервер.
Все очень просто не правда ли?
Ооочень остроумно. Если не считать что он доступен для каждого, по заявлению самого Гарри. И если не тренировать сарказм, то можно ответить человеку, что ошибка ERROR! Failed to install app 258550 (No subscription) появляется когда логинишься в CMD под собственным логпасом. Так что все проще.
1. Открываешь SteamCMD
2. login anonymous
3. app_update 258550 -beta experimental validate
4. Success! App ‘258550’ fully installed.
Источник
ERROR! Failed to install app ‘232250’
TrojanCS
Участник
KorDen
Atra esterní ono thelduin!
TrojanCS
Участник
The Night Fury
Участник
Буквально только что обновил. Без проблем запустилось.
Сюда логи скинь, раз на то пошло.
fuck society
TrojanCS, так же
Добавлено через 47 минут
Николай Головин
Участник
Охххохохо! Спасибо, мужики, под действующим логином качать не хотело(речь о ТФе), а вот под анонимусом(ты велик и могуч чувак, жаль не встретимся, пива бы поставил) начало качать! 🙂
Для простоты сделал себе батники с параметрами и запускал их; КСГО под активным акком скачался нормально, а вот ТФ так не смог — ошибка отсутствия описания — «(No subscription)». Второй батник написал от имени великого и могучего — сразу зацепилось и приступило качать.
До этого находил(для Win-базированных систем) настройки эксплорера поправить, не помогало.
Почему батником в итоге? Потому как если все те действия, которые я записал в него, вводил руками — меня отправляли лесом с ошибками об отсутствии логина или интернет-соединения.
В итоге мои действия, чтобы всё установить(быть может кому поможет, сразу пишу без ошибок):
-создал папку на D: , скажем Dserver и закинул в неё steamcmd.exe
-запустил его, после чего он начал выкачивать себе установочные файлы, скачал и запустился с видом как командная строка, единственное отличие был написан не путь профиля, как при запуске cmd, а просто — «Steam>» — вбиваем в него quit для правильного завершения.
-создаём батник(просто текстовый файл с расширением *.bat и желательно имя латиницей дать ему или цифрами) и в него корячим следующий текст(без кавычек):
«.steamcmd.exe +login anonymous +force_install_dir d:dserverПАПКА_СЕРВЕРА +app_update ИД_НАШЕЙ_ИГРЫ validate«
ПАПКА_СЕРВЕРА — на ваше усмотрение 😉
ИД_НАШЕЙ_ИГРЫ — на страничке вики Вэлв
Источник
Name already in use
LinuxGSM-Docs / steamcmd / errors.md
- Go to file T
- Go to line L
- Copy path
- Copy permalink
Copy raw contents
Copy raw contents
SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.
SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202 .
Seems to affect HLDS based servers. Running again often fixes the issue
| Reason | Error! App ’90’ state is 0x10E after update job. | |
|---|---|---|
| Hex | 0x10E | Reason |
| Decimal/StateFlags | 270 | Hex |
Not enough disk space.
| Reason | Not enough disk quota |
|---|---|
| Hex | 0x202 |
| Decimal/StateFlags | 514 |
<% hint style=»info» %>Unknown error, if you have any details please let us know
| Reason | |
| Hex | 0x206 |
| Decimal/StateFlags | 518 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
Not enough disk space.
| Title | Title |
|---|---|
| Reason | Not enough disk space |
| Hex | 0x212 |
| Decimal/StateFlags | 530 |
Connection issue with steam, you will need to wait for the steam servers to recover.
| Reason | Connection issue |
|---|---|
| Hex | 0x402 |
| Decimal/StateFlags | 1026 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
<% hint style=»info» %>Unknown error, if you have any details please let us know
| Reason | |
| Hex | 0x602 |
| Decimal/StateFlags | 1538 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.
| Reason | Disk write failure |
| Hex | 0x606 |
| Decimal/StateFlags | 1542 |
| Reason | |
|---|---|
| Hex | 0x2 |
| Decimal/StateFlags | 2 |
<% hint style=»warning» %>Missing content_log.txt if you have it please let us know.
No connection to content servers.
| Reason | No connection to content servers |
|---|---|
| Reason 2 | Received 401 (Unauthorized) HTTP response for depot 11 |
| Hex | 0x6 |
| Decimal/StateFlags | 6 |
To get more info and output see the SteamCMD logs in
/.steam/logs . The most useful log is content_log.txt that will provide more information on errors.
<% hint style=»success» %>If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.
SteamCMD Hex Codes
SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514 . You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error
512 StateUpdateRunning , 2 StateUpdateRequired
| StateInvalid | |
|---|---|
| StateUninstalled | 1 |
| StateUpdateRequired | 2 |
| StateFullyInstalled | 4 |
| StateEncrypted | 8 |
| StateLocked | 16 |
| StateFilesMissing | 32 |
| StateAppRunning | 64 |
| StateFilesCorrupt | 128 |
| StateUpdateRunning | 256 |
| StateUpdateRunning | 512 |
| StateUpdateStarted | 1024 |
| StateUninstalling | 2048 |
| StateBackupRunning | 4096 |
| StateReconfiguring | 65536 |
| StateValidating | 131072 |
| StateAddingFiles | 262144 |
| StatePreallocating | 524288 |
| StateDownloading | 1048576 |
| StateStaging | 2097152 |
| StateCommitting | 4194304 |
| StateUpdateStopping | 8388608 |
This table is from 2015 and is probably outdated now but it’s the best we currently have.
ulimit SteamCMD startup error
Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:
ERROR! Failed to install app » (No subscription)
The Steam account being used does not have a license for the required game.
ERROR! Password check for AppId returned error Failure.
The password for the branch is incorrect.
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.
Loading Steam API. Failed to init SDL priority manager: SDL not found
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
CWorkThreadPool: work processing queue not empty: 2 items discarded.
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Failed to set thread priority: per-thread setup failed
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Источник
Alrighty, well it seems I’ve pinpointed the cause of the issue. I randomly tried running the «steam.sh» file via «./steam.sh», and this is what it printed in my PuTTY window:
Code:
./steam.sh: line 64: echo: write error: No space left on device
According to the site where I purchased my dedicated server from (www.ovh.com, I purchased the dedicated server for $39.99/month), my server comes with a 2x 1TB SATA2 hard drive set up, which means I should have 2TB of space.
So I googled around to find a disk usage command, and found «du -sh». So I tried that in PuTTY, and it replied with «18GB».
I’ve since submitted a customer support ticket to find out what is going on and why/how I’ve apparently used all my disk space thus far, when all I’ve got installed and running are 3 Team Fortress 2 servers.
Also, I’m currently got my TF2 servers set up in the «root» directory, like so: «/root/gameservers/tf2/server1». It prints a warning when I start a server up advising me not to run servers as Root, but I just ignored that. Not sure if there’s no disk space because the «root» directory has a size limit. That could be the issue…
#1
theSHENDER
-
- Пользователь
-
- 9 сообщений
Новичок
Отправлено 03 Май 2018 — 10:37
При загрузки CS:GO, выдает ошибку:
Error! App '740' state is 0x2 after update job.
Как бороться с этим ?
Сообщение отредактировал theSHENDER: 03 Май 2018 — 11:56
- Наверх
#2
ykpon
Отправлено 03 Май 2018 — 15:09
А если «app_update 740 validate»?
- Наверх
#3
theSHENDER
theSHENDER
-
- Пользователь
-
- 9 сообщений
Новичок
Отправлено 04 Май 2018 — 14:26
А если «app_update 740 validate»?
А разница? validate — это проверка целостности приложения.
Проблема решена. 
Решение:
Нужно отключить брандмауэр
service iptables stop && chkconfig iptables off
Сообщение отредактировал theSHENDER: 04 Май 2018 — 14:27
- Наверх
#4
ykpon
Отправлено 04 Май 2018 — 16:37
А может правила не нужно добавлять какие попало? Потому что с фаерволом никогда таких проблем не было.
- Наверх
#5
Santiago
Отправлено 04 Май 2018 — 17:11
А разница? validate — это проверка целостности приложения.
Проблема решена.
Решение:
Нужно отключить брандмауэр
service iptables stop && chkconfig iptables off
Это не решение. Это уборка костылей обратно на полку
- Наверх
#6
JustFun
Отправлено 01 Июнь 2018 — 10:43
Это не решение. Это уборка костылей обратно на полку
А какого будет решение ?
Также столкнулся с этой бедой и в интернете не нашел ответа в чеМ причина 
- Наверх
#7
Santiago
Отправлено 01 Июнь 2018 — 16:55
А какого будет решение ?
Также столкнулся с этой бедой и в интернете не нашел ответа в чеМ причина
причина в том, что не нужно делать того, чего не знаешь и правил всяких писать если не знаешь для чего они
- Наверх
#8
JustFun
Отправлено 02 Июнь 2018 — 9:07
причина в том, что не нужно делать того, чего не знаешь и правил всяких писать если не знаешь для чего они
Согласен.
Вообщем проблема связана с загруженностью серверов стим.
Попробовал рано утром и всё как по маслу встало. Ничего с файрволом делать не нужно и правил (тем более когда не знаешь, что они делают) никаких писать не нужно.
- Наверх
#9
Милена1488
Милена1488
-
- Пользователь
-
- 1 сообщений
Новичок
Отправлено 01 Август 2018 — 15:22
Согласен.
Вообщем проблема связана с загруженностью серверов стим.
Попробовал рано утром и всё как по маслу встало. Ничего с файрволом делать не нужно и правил (тем более когда не знаешь, что они делают) никаких писать не нужно.
Та же проблема , но уже с установкой css
Никаких правил и запретов iptables нет . Всё с 0
Установила нужные библиотеки и всё.
Ставила сервер css на других хостингах много раз и всегда это занимало считанные минуты, решила поставить сервер на myarena , долбаюсь второй день .
Вот что ответила тех.поддержка через 5 часов
Введите:
wget https://steamcdn-a.a…md_linux.tar.gz —no-check-certificate
вместо:
wget https://steamcdn-a.a…md_linux.tar.gz
Но даже после того как скачала и запустила steam cmd войти не удалось ни под anonymous , ни под своим логином -паролем .Пишет :
opensslconnection.cpp (1490) : Assertion Failed : unableto load trusted SSL root certificate
Кто то сталкивался с таким вот на vds myarena ?
PS.Решение нашла. Может кому то пригодится :
apt-get install —reinstall ca-certificates
Сообщение отредактировал Милена1488: 01 Август 2018 — 16:20
- Наверх
#10
Nekro
Отправлено 01 Август 2018 — 21:09
Как по мне так проще пу установить, и с нее ставить.
- Наверх
Содержание
- 0x202 after update job
- 0x202 after update job
- 0x202 after update job
- Name already in use
- LinuxGSM-Docs / steamcmd / errors.md
0x202 after update job
When I try to install a server for garry’s mod i get this error in the SteamCMD
Login as anonymous instead.
Login as anonymous instead.
Tried that, still does not work. what should i do now?
Tried that, still does not work. what should i do now?
Can you explain how it doesn’t work?
Can you explain how it doesn’t work?
it shows the same error
Doesn’t make sense, because I just tested it myself and it’s working fine.
it shows the same error
Doesn’t make sense, because I just tested it myself and it’s working fine.
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂
Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK
Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.
mine dosent work
Connecting anonymously to Steam Public. Logged in OK
Waiting for user info. OK
Steam>app_update 4020
Update state (0x5) validating, progress: 0.66 (25683068 / 3881893441)
Error! App ‘4020’ state is 0x202 after update job.
Mine says ERROR! Failed to install app ‘4020’ (Disk write failure)
Make sure you have access to where you are trying to install your server. Try running SteamCMD as administrator (right click and select run as administrator) or try installing some where differnt that you are sure you have access to, like your desktop. I cant remember the problem i had but i hope this helps 🙂
Источник
0x202 after update job
I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:
Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»
I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?
Edit:
Maybe this can help?
applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk
Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:
Источник
0x202 after update job
I have two very similar servers running on different VPS, one stopped working out of nowhere and I’m unable to validate or update. This is what it looks like:
Update state (0x5) validating, progress: 71.76 (9970874103 / 13894659087)
Update state (0x5) validating, progress: 73.02 (10146019508 / 13894659087)
Update state (0x5) validating, progress: 74.34 (10329975632 / 13894659087)
Update state (0x5) validating, progress: 76.54 (10634480976 / 13894659087)
Update state (0x5) validating, progress: 77.73 (10799672719 / 13894659087)
Update state (0x5) validating, progress: 78.94 (10968286289 / 13894659087)
Update state (0x5) validating, progress: 80.14 (11135051356 / 13894659087)
Update state (0x5) validating, progress: 81.23 (11285937125 / 13894659087)
Update state (0x5) validating, progress: 82.26 (11429820353 / 13894659087)
Error! App ‘740’ state is 0x202 after update job.»
I’ve never had a server stop working like that without an update or anything so I was curious if anyone had something similar. I suspect maybe there’s an HDD issue on the host’s side?
Edit:
Maybe this can help?
applicationmanager.cpp (1106) : Assertion Failed: Failed to write app state file /home/steam/servers/2/steamapps/appmanifest_740.acf
applicationmanager.cpp (861) : Assertion Failed: m_bStateChangesSavedToDisk
Edit2:
After deleting the steamapps folder there is no more error and it now downloading, something was probably corrupted but I am now getting:
Steam>app_update 740 validate
Update state (0x1) running, progress: 100.00 (6540282208 / 6540282208)
Error! App ‘740’ state is 0x602 after update job.
Источник
Name already in use
LinuxGSM-Docs / steamcmd / errors.md
- Go to file T
- Go to line L
- Copy path
- Copy permalink
Copy raw contents
Copy raw contents
SteamCMD can sometimes output errors when something goes wrong. Sadly Valve has never released an official list of what the error messages mean. Because of this, a lot of guesswork has been needed to figure it out. This page will highlight what we already know and info on researching what the error might mean in the hope that you can contribute to understanding SteamCMD errors.
SteamCMD uses hexadecimal numbers to give its current «state». Every time SteamCMD does something it changes its state. When SteamCMD fails it will output its has hexadecimal state, for example 0x202 .
Seems to affect HLDS based servers. Running again often fixes the issue
| Reason | Error! App ’90’ state is 0x10E after update job. | |
|---|---|---|
| Hex | 0x10E | Reason |
| Decimal/StateFlags | 270 | Hex |
Not enough disk space.
| Reason | Not enough disk quota |
|---|---|
| Hex | 0x202 |
| Decimal/StateFlags | 514 |
<% hint style=»info» %>Unknown error, if you have any details please let us know
| Reason | |
| Hex | 0x206 |
| Decimal/StateFlags | 518 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
Not enough disk space.
| Title | Title |
|---|---|
| Reason | Not enough disk space |
| Hex | 0x212 |
| Decimal/StateFlags | 530 |
Connection issue with steam, you will need to wait for the steam servers to recover.
| Reason | Connection issue |
|---|---|
| Hex | 0x402 |
| Decimal/StateFlags | 1026 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
<% hint style=»info» %>Unknown error, if you have any details please let us know
| Reason | |
| Hex | 0x602 |
| Decimal/StateFlags | 1538 |
<% hint style=»warning» %>Missing content_log.txt if you have experienced this error and have a log please let us know.
SteamCMD is unable to write to the disk. Normally caused by permissions issues. This issue was discovered when a directory that was linked using symlink did not have the correct permissions to allow SteamCMD to write to it.
| Reason | Disk write failure |
| Hex | 0x606 |
| Decimal/StateFlags | 1542 |
| Reason | |
|---|---|
| Hex | 0x2 |
| Decimal/StateFlags | 2 |
<% hint style=»warning» %>Missing content_log.txt if you have it please let us know.
No connection to content servers.
| Reason | No connection to content servers |
|---|---|
| Reason 2 | Received 401 (Unauthorized) HTTP response for depot 11 |
| Hex | 0x6 |
| Decimal/StateFlags | 6 |
To get more info and output see the SteamCMD logs in
/.steam/logs . The most useful log is content_log.txt that will provide more information on errors.
<% hint style=»success» %>If you have experienced an error we don’t have logs for please provide them to us to assist in diagnosing the issue.
SteamCMD Hex Codes
SteamCMD uses hex error codes such as 0x202 which can be converted into decimal 514 . You can use a hex-to-decimal converter to do this. Using the table below you can work out the status messages. By doing a calculation. Find the highest number below the state 512 which is the first error. Then take the number away from the total 514-512=2 which gives you the last error. This can be done for any error
512 StateUpdateRunning , 2 StateUpdateRequired
| StateInvalid | |
|---|---|
| StateUninstalled | 1 |
| StateUpdateRequired | 2 |
| StateFullyInstalled | 4 |
| StateEncrypted | 8 |
| StateLocked | 16 |
| StateFilesMissing | 32 |
| StateAppRunning | 64 |
| StateFilesCorrupt | 128 |
| StateUpdateRunning | 256 |
| StateUpdateRunning | 512 |
| StateUpdateStarted | 1024 |
| StateUninstalling | 2048 |
| StateBackupRunning | 4096 |
| StateReconfiguring | 65536 |
| StateValidating | 131072 |
| StateAddingFiles | 262144 |
| StatePreallocating | 524288 |
| StateDownloading | 1048576 |
| StateStaging | 2097152 |
| StateCommitting | 4194304 |
| StateUpdateStopping | 8388608 |
This table is from 2015 and is probably outdated now but it’s the best we currently have.
ulimit SteamCMD startup error
Some users may get a ulimit error (no permission/cannot open file) while SteamCMD is starting up. This error caused by a low setting of the -n parameter (number of file descriptors) of ulimit. Some servers forbid increasing ulimit values after startup (or beyond a limit set by root). This can be fixed by changing the file descriptor number ulimit:
ERROR! Failed to install app » (No subscription)
The Steam account being used does not have a license for the required game.
ERROR! Password check for AppId returned error Failure.
The password for the branch is incorrect.
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
Ignore the error, do not do anything to attempt to fix it. It is a known error that has appeared ever since SteamPipe was introduced. It does not cause any issues and can be ignored.
Loading Steam API. Failed to init SDL priority manager: SDL not found
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
CWorkThreadPool: work processing queue not empty: 2 items discarded.
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Failed to set thread priority: per-thread setup failed
Ignore the error, do not do anything to attempt to fix it. It does not cause any issues and can be ignored.
Источник
Консольный клиент Steam или SteamCMD — новая утилита для установки и обновления выделенных серверов через интерфейс командной строки. Он работает только с играми, которые переведены на контентную систему SteamPipe.
Данная утилита поддерживает следующие системы:
- Windows
- Linux
- OS X
Windows
Загрузка
1. Создайте папку для SteamCMD.
C:SteamCMD
2. Загрузите SteamCMD для Windows: https://steamcdn-a.akamaihd.net/client/installer/steamcmd.zip
3. Извлеките содержимое zip-архива в созданную папку.
Запуск SteamCMD
Запустить утилиту можно только через консольный терминал windows
1. Открываем командную строку Win+R
переходим в папку, куда извлекли steamcmd
cd C:SteamCMD
Если вы создали папку на другом диске, то перейти туда можно командной
cd /D F:/SteamCMD
Запускаем утилиту
steamcmd
Вначале она сама себя обновит и по окончанию выведет приглашение для дальнейшей работы (Steam>)
Linux
Сначала нам потребуется поставить нужные зависимости
Ubuntu/Debian 64-бит
sudo apt-get install lib32gcc1
RedHat/CentOS
yum install glibc libstdc++
RedHat/CentOS 64-бит
yum install glibc.i686 libstdc++.i686
Создадим нужную нам директорию
mkdir ~/steamcmd
cd ~/steamcmd
Загрузим архив с утилитой
wget https://steamcdn-a.akamaihd.net/client/installer/steamcmd_linux.tar.gz
И распакуем архив
tar -xvzf steamcmd_linux.tar.gz
Запускаем утилиту
cd ~/steamcmd
./steamcmd.sh
OS X
Откроем Terminal.app и создадим директорию для SteamCMD
mkdir ~/steamcmd
cd ~/steamcmd
Загружаем архив
curl -O [URL]https://steamcdn-a.akamaihd.net/client/installer/steamcmd_osx.tar.gz[/URL]
Распаковываем содержимое
tar -xvzf steamcmd_osx.tar.gz
Запускаем утилиту
cd ~/steamcmd
./steamcmd.sh
Загрузка игрового сервера
Давайте представимся системе — вводим логин анонима, чтобы выкачивать ресурсы
login anonymous
Для некоторых игр анонимность не подходит и придется войти под своим аккаунтом Steam
Примечание: По соображениям безопасности рекомендуется создать новый аккаунт Steam предназначенный для загрузки и обновления ваших серверов.
Примечание: Вам нужно выйти из обычного клиента Steam чтобы корректно войти в SteamCMD.
Вводим логин нашего аккаунта
login ваш_логин
Дальше вас попросят ввести пароль от вашего аккаунта (ввод пароля никак не отображается)
password:
Если Steam Guard активирован, то потребуется ввести код подтверждения, который был отправлен вам на почту
Enter the current code from your Steam Guard Mobile Authenticator app
Two-factor code: 13GGW
Дождись подтверждения удачного входа
Logged in OK
Waiting for license info…OK
Steam>
Задаем директорию, куда будут закачаны файлы сервера
force_install_dir ./cs1.6/
В нашей директории, где находится steamcmd, появится поддиректория cs1.6
Выкачиваем наш сервер counter-strike 1.6 [Список всех поддерживаемых серверов]
app_update 90 -beta beta validate
*HLDS (APPID 90) в настоящее время требуется несколько прогонов app_update, прежде чем все необходимые файлы будут успешно установлены. Просто запустите app_update 90 validate несколько раз, пока приложение не будет больше обновляться.
Выходим — quit
Загрузка игрового сервера завершена.
Кросс-платформенная загрузка
Разработчики добавили в SteamCMD новый параметр ( @sSteamCmdForcePlatformType ), который позволяет выбрать платформу для которой необходимо скачать файлы, даже если это не та платформа на которой вы сейчас работаете.
Для загрузки Windows сервер CS: 1.6 из под Linux:
Код:
./steamcmd.sh [email protected] windows +login anonymous +force_install_dir ../hlds +app_update 90 validate +quitДля загрузки сервера под Linux из Windows:
Код:
steamcmd.sh [email protected] linux +login anonymous +force_install_dir ../hlds +app_update 90 validate +quitДля загрузки сервера для Mac OS X из Windows:
Код:
steamcmd.sh [email protected] macos +login anonymous +force_install_dir ../hlds +app_update 90 validate +quitИсправление неудачной загрузки сервера (папки cstrike)
В свете последних событий, некоторые люди испытывают проблему с загрузкой сервера, в частности у них просто не выкачивается папка cstrike. Ниже будет описан способ исправить данную проблему, а в архиве прикреплены нужные файлы.
- Выполняем инструкцию запуска steamcmd
- После выполнения команды app_update 90 -beta beta validate, переходим в директорию, которую указали в force_install_dir
- Находим там директорию steamapps и удаляем все ее содержимое
- Помещаем в данную директорию наши файлы (appmanifest_10.acf, appmanifest_70.acf, appmanifest_90.acf) из архива
- Выполняем еще раз команду app_update 90 -beta beta validate
- Теперь директория cstrike должна нормально скачаться
За решение благодарим voed и dgibbs64
Вариант 2
Вариант 3 с использование Depotdownloader
Официальная страница Steam CMD