Error cannot find any interfaces in mode monitor

@blmvxer
here :
[ 0.000000] Linux version 4.18.0-kali3-amd64 (devel@kali.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.20-2kali2 (2018-11-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali3-amd64 root=UUID=6dd998d9-9743-48ab-9a30-6a2953e0d2fa ro initrd=/install/initrd.gz quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR variable ranges disabled: [ 0.000000] Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [(____ptrval____)] [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.000000] BRK [0x16851000, 0x16851fff] PGTABLE [ 0.000000] BRK [0x16852000, 0x16852fff] PGTABLE [ 0.000000] BRK [0x16853000, 0x16853fff] PGTABLE [ 0.000000] BRK [0x16854000, 0x16854fff] PGTABLE [ 0.000000] BRK [0x16855000, 0x16855fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1d12a000-0x1f50afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX ) [ 0.000000] ACPI: XSDT 0x000000001FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 0.000000] ACPI: FACP 0x000000001FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 0.000000] ACPI: DSDT 0x000000001FFF0470 0021FF (v02 VBOX VBOXBIOS 00000002 INTL 20100528) [ 0.000000] ACPI: FACS 0x000000001FFF0200 000040 [ 0.000000] ACPI: FACS 0x000000001FFF0200 000040 [ 0.000000] ACPI: APIC 0x000000001FFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061) [ 0.000000] ACPI: SSDT 0x000000001FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffeffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1ffeb000-0x1ffeffff] [ 0.000000] kvm-clock: cpu 0, msr 0:1ffe2001, primary cpu clock [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 16442296852 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffeffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffeffff] [ 0.000000] Reserved but unavailable: 114 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff] [ 0.000000] On node 0 totalpages: 130958 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1984 pages used for memmap [ 0.000000] DMA32 zone: 126960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] [mem 0x20000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576 [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128889 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali3-amd64 root=UUID=6dd998d9-9743-48ab-9a30-6a2953e0d2fa ro initrd=/install/initrd.gz quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 455436K/523832K available (10252K kernel code, 1227K rwdata, 3256K rodata, 1568K init, 656K bss, 68396K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 31279 entries in 123 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.004000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to physical x2apic. [ 0.007834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.008007] tsc: Detected 2591.596 MHz processor [ 0.008018] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255b3928676, max_idle_ns: 440795202126 ns [ 0.008021] Calibrating delay loop (skipped) preset value.. 5183.19 BogoMIPS (lpj=10366384) [ 0.008026] pid_max: default: 32768 minimum: 301 [ 0.008094] Security Framework initialized [ 0.008096] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.008131] AppArmor: AppArmor initialized [ 0.008260] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.008318] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.008334] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.008338] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.012133] mce: CPU supports 0 MCE banks [ 0.012165] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.012167] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.012171] Spectre V2 : Mitigation: Full generic retpoline [ 0.012172] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.012174] Speculative Store Bypass: Vulnerable [ 0.012487] Freeing SMP alternatives memory: 24K [ 0.016000] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.016000] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.016000] Hierarchical SRCU implementation. [ 0.016000] NMI watchdog: Perf event create on CPU 0 failed with -2 [ 0.016000] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.016000] smp: Bringing up secondary CPUs ... [ 0.016000] x86: Booting SMP configuration: [ 0.016000] .... node #0, CPUs: #1 [ 0.004000] kvm-clock: cpu 1, msr 0:1ffe2041, secondary cpu clock [ 0.004000] mce: CPU supports 0 MCE banks [ 0.016053] smp: Brought up 1 node, 2 CPUs [ 0.016053] smpboot: Max logical packages: 1 [ 0.016053] smpboot: Total of 2 processors activated (10366.38 BogoMIPS) [ 0.016254] devtmpfs: initialized [ 0.016254] x86/mm: Memory block size: 128MB [ 0.016851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.016851] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.016851] pinctrl core: initialized pinctrl subsystem [ 0.017491] NET: Registered protocol family 16 [ 0.020037] audit: initializing netlink subsys (disabled) [ 0.020090] audit: type=2000 audit(1544181824.882:1): state=initialized audit_enabled=0 res=1 [ 0.020288] cpuidle: using governor ladder [ 0.020288] cpuidle: using governor menu [ 0.020288] ACPI: bus type PCI registered [ 0.020288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.020427] PCI: Using configuration type 1 for base access [ 0.024223] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.024223] ACPI: Added _OSI(Module Device) [ 0.024223] ACPI: Added _OSI(Processor Device) [ 0.024223] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.024223] ACPI: Added _OSI(Processor Aggregator Device) [ 0.024223] ACPI: Added _OSI(Linux-Dell-Video) [ 0.031337] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.035717] ACPI: Interpreter enabled [ 0.035750] ACPI: (supports S0 S5) [ 0.035752] ACPI: Using IOAPIC for interrupt routing [ 0.036451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.036833] ACPI: Enabled 2 GPEs in block 00 to 07 [ 0.052132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.052142] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.052188] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.052208] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.053014] PCI host bridge to bus 0000:00 [ 0.053020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.053025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.053030] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.053035] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfdffffff window] [ 0.053040] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.053138] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.054533] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.056476] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a [ 0.057504] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f] [ 0.057908] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.057912] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.057916] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.057920] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.058544] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000 [ 0.063669] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref] [ 0.093069] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.094197] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff] [ 0.096333] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017] [ 0.101819] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000 [ 0.103172] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f] [ 0.104426] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff] [ 0.105341] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref] [ 0.109959] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100 [ 0.110317] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff] [ 0.110507] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f] [ 0.112516] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310 [ 0.113529] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff] [ 0.121373] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000 [ 0.122628] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI [ 0.122655] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB [ 0.124122] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601 [ 0.125714] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247] [ 0.126692] pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b] [ 0.127745] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257] [ 0.128315] pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b] [ 0.129612] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f] [ 0.130721] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff] [ 0.137361] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11) [ 0.138124] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11) [ 0.138378] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11) [ 0.138625] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11) [ 0.139208] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.139208] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.140013] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.140015] vgaarb: loaded [ 0.140178] pps_core: LinuxPPS API ver. 1 registered [ 0.140180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.140187] PTP clock support registered [ 0.140214] EDAC MC: Ver: 3.0.0 [ 0.141149] PCI: Using ACPI for IRQ routing [ 0.141149] PCI: pci_cache_line_size set to 64 bytes [ 0.141149] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.141149] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff] [ 0.144871] clocksource: Switched to clocksource kvm-clock [ 0.182800] VFS: Disk quotas dquot_6.6.0 [ 0.182834] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.183108] AppArmor: AppArmor Filesystem Enabled [ 0.183152] pnp: PnP ACPI init [ 0.183294] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.183519] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active) [ 0.185353] pnp: PnP ACPI: found 2 devices [ 0.200748] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.200766] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.200769] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.200773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.200776] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfdffffff window] [ 0.200889] NET: Registered protocol family 2 [ 0.201280] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.201300] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.201326] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.201353] TCP: Hash tables configured (established 4096 bind 4096) [ 0.201390] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.201397] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.201448] NET: Registered protocol family 1 [ 0.201464] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.201518] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.201638] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.204300] PCI: CLS 0 bytes, default 64 [ 0.204382] Unpacking initramfs... [ 1.530367] Freeing initrd memory: 36740K [ 1.530486] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b3928676, max_idle_ns: 440795202126 ns [ 1.530540] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.531580] Initialise system trusted keyrings [ 1.531788] workingset: timestamp_bits=40 max_order=17 bucket_order=0 [ 1.536776] zbud: loaded [ 1.537479] pstore: using deflate compression [ 1.970634] Key type asymmetric registered [ 1.970637] Asymmetric key parser 'x509' registered [ 1.970716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.970841] io scheduler noop registered [ 1.970843] io scheduler deadline registered [ 1.970897] io scheduler cfq registered (default) [ 1.970900] io scheduler mq-deadline registered [ 1.971206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.971228] intel_idle: Please enable MWAIT in BIOS SETUP [ 1.971606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.972945] Linux agpgart interface v0.103 [ 1.973151] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.973152] AMD IOMMUv2 functionality not available on this system [ 1.973594] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.974367] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.974374] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.974725] mousedev: PS/2 mouse device common for all mice [ 1.975749] rtc_cmos rtc_cmos: registered as rtc0 [ 1.975864] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.976192] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 1.976312] ledtrig-cpu: registered to indicate activity on CPUs [ 1.976882] NET: Registered protocol family 10 [ 1.984874] Segment Routing with IPv6 [ 1.984923] mip6: Mobile IPv6 [ 1.984926] NET: Registered protocol family 17 [ 1.984932] mpls_gso: MPLS GSO support [ 1.985365] sched_clock: Marking stable (1985165894, 0)->(2799325902, -814160008) [ 1.986463] registered taskstats version 1 [ 1.986465] Loading compiled-in X.509 certificates [ 2.047504] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 2.047539] zswap: loaded using pool lzo/zbud [ 2.048048] AppArmor: AppArmor sha1 policy hashing enabled [ 2.048698] rtc_cmos rtc_cmos: setting system clock to 2018-12-07 11:23:28 UTC (1544181808) [ 2.056767] Freeing unused kernel image memory: 1568K [ 2.072676] Write protecting the kernel read-only data: 16384k [ 2.074131] Freeing unused kernel image memory: 2028K [ 2.074631] Freeing unused kernel image memory: 840K [ 2.106754] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.106756] x86/mm: Checking user space page tables [ 2.136367] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.489712] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.489714] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.499223] SCSI subsystem initialized [ 2.511261] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0 [ 2.515848] ACPI: bus type USB registered [ 2.515895] usbcore: registered new interface driver usbfs [ 2.515916] usbcore: registered new interface driver hub [ 2.515968] usbcore: registered new device driver usb [ 2.524106] libata version 3.00 loaded. [ 2.526871] ata_piix 0000:00:01.1: version 2.13 [ 2.549579] ahci 0000:00:0d.0: version 3.0 [ 2.549592] cryptd: max_cpu_qlen set to 1000 [ 2.551606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.552264] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled [ 2.552568] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 2.552574] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 2.553238] scsi host1: ahci [ 2.553660] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21 [ 2.553680] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.554860] ehci-pci: EHCI PCI platform driver [ 2.555711] ohci-pci: OHCI PCI platform driver [ 2.557160] ohci-pci 0000:00:06.0: OHCI PCI host controller [ 2.557171] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1 [ 2.557314] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000 [ 2.561638] scsi host0: ata_piix [ 2.567955] AVX version of gcm_enc/dec engaged. [ 2.567956] AES CTR mode by8 optimization enabled [ 2.574314] scsi host2: ata_piix [ 2.574455] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 2.574458] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 2.617098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.617103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.617107] usb usb1: Product: OHCI PCI host controller [ 2.617111] usb usb1: Manufacturer: Linux 4.18.0-kali3-amd64 ohci_hcd [ 2.617114] usb usb1: SerialNumber: 0000:00:06.0 [ 2.617584] hub 1-0:1.0: USB hub found [ 2.617746] hub 1-0:1.0: 12 ports detected [ 2.631310] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 2.747427] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.749010] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 2.880761] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.880957] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 2.880960] ata3.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 32) [ 2.881214] ata3.00: configured for UDMA/133 [ 2.884260] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 2.885206] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 2.900263] sd 1:0:0:0: [sda] 167772160 512-byte logical blocks: (85.9 GB/80.0 GiB) [ 2.900274] sd 1:0:0:0: [sda] Write Protect is off [ 2.900278] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.900293] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.928605] sda: sda1 sda2 < sda5 > [ 2.929120] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.981358] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray [ 2.981361] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.981684] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.016316] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:95:8c:5e [ 3.016325] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.034800] random: fast init done [ 3.084388] usb 1-1: new full-speed USB device number 2 using ohci-pci [ 3.352772] PM: Image not found (code -22) [ 3.411764] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00 [ 3.411769] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.411773] usb 1-1: Product: USB Tablet [ 3.411776] usb 1-1: Manufacturer: VirtualBox [ 3.437270] hidraw: raw HID events driver (C) Jiri Kosina [ 3.453002] usbcore: registered new interface driver usbhid [ 3.453003] usbhid: USB HID core driver [ 3.457074] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input3 [ 3.457847] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 4.214673] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.825333] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.825387] systemd[1]: Detected virtualization oracle. [ 7.825399] systemd[1]: Detected architecture x86-64. [ 7.838611] systemd[1]: Set hostname to <kali>. [ 9.699372] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699548] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.699610] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699783] systemd[1]: Listening on udev Control Socket. [ 9.699806] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699956] systemd[1]: Listening on Journal Socket. [ 9.704670] systemd[1]: Mounting POSIX Message Queue File System... [ 9.706497] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.706860] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.852948] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.059093] systemd-journald[279]: Received request to flush runtime journal from PID 1 [ 13.176992] random: crng init done [ 13.176994] random: 7 urandom warning(s) missed due to ratelimiting [ 13.794049] ACPI: AC Adapter [AC] (on-line) [ 13.806683] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.806837] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 13.925360] ACPI: Battery Slot [BAT0] (battery present) [ 13.940759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 13.940795] ACPI: Power Button [PWRF] [ 13.940983] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input6 [ 13.941005] ACPI: Sleep Button [SLPF] [ 14.107330] vboxguest: loading out-of-tree module taints kernel. [ 14.140823] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds [ 14.140986] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7 [ 14.141132] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000) [ 14.141134] vboxguest: Successfully loaded version 5.2.22_Debian (interface 0x00010004) [ 14.142299] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 14.252463] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 14.252610] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 14.315188] [drm] VRAM 08000000 [ 14.315431] [TTM] Zone kernel: Available graphics memory: 248318 kiB [ 14.315432] [TTM] Initializing pool allocator [ 14.315440] [TTM] Initializing DMA pool allocator [ 14.320618] fbcon: vboxdrmfb (fb0) is primary device [ 14.332343] Console: switching to colour frame buffer device 100x37 [ 14.357564] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device [ 14.381985] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0 [ 14.428308] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer [ 14.428310] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules [ 14.428312] RAPL PMU: hw unit of domain package 2^-0 Joules [ 14.428314] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules [ 15.677210] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000 [ 15.857391] Adding 2095100k swap on /dev/sda5. Priority:-2 extents:1 across:2095100k FS [ 22.192293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.197406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.200169] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 22.201032] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Interface   PHY   Driver              Chipset                                                   

1. wlan0 phy0 wl Broadcom Limited BCM4331 802.11a/b/g/n (rev 02)
2. wlan1 phy1 rtl8814au Realtek Semiconductor Corp.

[+] Select wireless interface (1-2): 2
[+] enabling monitor mode on wlan1… failed
failed

[!] Error: Cannot find any interfaces in Mode:Monitor

[!] Full stack trace below

[!] Traceback (most recent call last):
[!] File «/root/wifite2/wifite/main.py», line 93, in entry_point
[!] wifite.start()
[!] File «/root/wifite2/wifite/main.py», line 53, in start
[!] Configuration.get_monitor_mode_interface()
[!] File «/root/wifite2/wifite/config.py», line 130, in get_monitor_mode_interface
[!] cls.interface = Airmon.ask()
[!] File «/root/wifite2/wifite/tools/airmon.py», line 319, in ask
[!] iface.interface = Airmon.start(iface)
[!] File «/root/wifite2/wifite/tools/airmon.py», line 190, in start
[!] raise Exception(‘Cannot find any interfaces in Mode:Monitor’)
[!] Exception: Cannot find any interfaces in Mode:Monitor

[!] Exiting

not opening ( enabling monitor mode on wlan0. failed ) #286

root@kali:/home/redhat# wifite —wpa
. .
.´ · . . · . wifite 2.2.5 : : : (¯) : : : automated wireless auditor . · /¯ ´ · .´ https://github.com/derv82/wifite2 /¯¯¯ ´

[+] option: targeting WPA-encrypted networks
[!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki
[!] Conflicting processes: NetworkManager (PID 648), wpa_supplicant (PID 717)
[!] If you have problems: kill -9 PID or re-run wifite with —kill)

1. wlan0 phy0 wl Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n (rev 01)

[+] enabling monitor mode on wlan0. failed
failed

[!] Error: Cannot find any interfaces in Mode:Monitor

[!] Full stack trace below

[!] Traceback (most recent call last):
[!] File «/usr/local/lib/python2.7/dist-packages/wifite/main.py», line 93, in entry_point
[!] wifite.start()
[!] File «/usr/local/lib/python2.7/dist-packages/wifite/main.py», line 53, in start
[!] Configuration.get_monitor_mode_interface()
[!] File «/usr/local/lib/python2.7/dist-packages/wifite/config.py», line 132, in get_monitor_mode_interface
[!] cls.interface = Airmon.ask()
[!] File «/usr/local/lib/python2.7/dist-packages/wifite/tools/airmon.py», line 319, in ask
[!] iface.interface = Airmon.start(iface)
[!] File «/usr/local/lib/python2.7/dist-packages/wifite/tools/airmon.py», line 190, in start
[!] raise Exception(‘Cannot find any interfaces in Mode:Monitor’)
[!] Exception: Cannot find any interfaces in Mode:Monitor

The text was updated successfully, but these errors were encountered:

Источник

make & make install error kali 2020.3 #83

uname -a
Linux kali 5.7.0-kali1-amd64 #1 SMP Debian 5.7.6-1kali2 (2020-07-01) x86_64 GNU/Linux

/rtl8188eus$ make
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/5.7.0-kali1-amd64/build M=/home/kali/rtl8188eus modules
make[1]: *** /lib/modules/5.7.0-kali1-amd64/build: No such file or directory. Stop.
make: *** [Makefile:2059: modules] Error 2

Kali version 2020.3

when i run make command show me error.

that’s about kernel version problem ?

The text was updated successfully, but these errors were encountered:

hi @SamirMahmudzade
you have to install the linux headers:
sudo apt-get install linux-headers-$(uname -r)
then make

hi @SamirMahmudzade
you have to install the linux headers:
sudo apt-get install linux-headers-$(uname -r)
then make

i try. but same problem.
after upgrade fixed problem

do you know about wifite ?
because monitor mode work without problem but when i run wifite show this >

wifite

. .
.´ · . . · . wifite2 2.5.5 : : : (¯) : : : a wireless auditor by @derv82 . · /¯ ´ · .´ maintained by kimocoder /¯¯¯ ´ https://github.com/kimocoder/wifite2

[!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki
[!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool
[!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools

1. wlan0 phy4 8188eu TP-Link TL-WN722N v2/v3 [Realtek RTL8188EUS]

[+] enabling monitor mode on wlan0. failed
failed

[!] Error: Cannot find any interfaces in monitor mode

Источник

Major issue with VirtualBox and Alfa AWUS036ACH #259

I keep geting this output when starting wifite. I tried all different drivers for this card but no luck. iwconfig shows that this card is in monitor mode:

wlan1 IEEE 802.11b ESSID:»» Nickname:»WIFI@REALTEK»
Mode:Monitor Frequency:2.457 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/100 Signal level=-100 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

However, this is what I get when I start wifite:

1. wlan1 phy1 88XXau Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter

[+] enabling monitor mode on wlan1. failed
failed

[!] Error: Cannot find any interfaces in monitor mode

[!] Full stack trace below

[!] Traceback (most recent call last):
[!] File «/usr/lib/python3/dist-packages/wifite/main.py», line 98, in entry_point
[!] wifite.start()
[!] File «/usr/lib/python3/dist-packages/wifite/main.py», line 51, in start
[!] Configuration.get_monitor_mode_interface()
[!] File «/usr/lib/python3/dist-packages/wifite/config.py», line 152, in get_monitor_mode_interface
[!] cls.interface = Airmon.ask()
[!] File «/usr/lib/python3/dist-packages/wifite/tools/airmon.py», line 332, in ask
[!] iface.interface = Airmon.start(iface)
[!] File «/usr/lib/python3/dist-packages/wifite/tools/airmon.py», line 203, in start
[!] raise Exception(‘Cannot find any interfaces in monitor mode’)
[!] Exception: Cannot find any interfaces in monitor mode

The text was updated successfully, but these errors were encountered:

Источник

some problem (bug?) #211

win10 pro vbox kali for vbox 64bit
Linux kali 4.19.0-kali4-amd64 #1 SMP Debian 4.19.28-2kali1 (2019-03-18) x86_64 GNU/Linux

The text was updated successfully, but these errors were encountered:

You can’t run Wifite in Virtual box in Windows. Windows has wireless drivers security restrictions that prevent WiFi devices from entering monitor mode or injecting packets.

what should I do to make it run?? ^^»

Nothing. You just can’t run it under Windows kernel. You need a Linux kernel with compatible firmware and wireless adapters.

I’ve ran wifite successfully several times in a virtual machine on a Windows 10 laptop. But it doesn’t always work. Is this security thing the cause of my intermittent problems?

I’ve ran wifite successfully several times in a virtual machine on a Windows 10 laptop. But it doesn’t always work. Is this security thing the cause of my intermittent problems?

It’s very interesting, how did you do it, because for example in VirtualBox linux system doesn’t have direct access to wireless adapter (system «sees» only ethernet internet connection).

I’ve ran wifite successfully several times in a virtual machine on a Windows 10 laptop. But it doesn’t always work. Is this security thing the cause of my intermittent problems?

It’s very interesting, how did you do it, because for example in VirtualBox linux system doesn’t have direct access to wireless adapter (system «sees» only ethernet internet connection).

Maybe I got lucky. But I bought 3 different usb wifi adapters, all of which were suppose to support monitor mode according to an article. Only one of them actually did or at least could be put into monitor mode. Using a kali install in virtual box on a windows 10 host. I am very amateur so I didn’t do anything special.
It doesn’t always work though. I have to set the virtual machine back to a snapshot that I made.
After I start wifite, it seems like it is just hung up or not going to do anything; I just walk away and come back half an hour later and it will have all the available «targets».

Also my Mint virtual box does use the wireless, but I think that I bridged it somehow to the ethernet. Can’t tell you specifically what I did there cause I followed a bunch of google forum stuff and gave up after several different hour long attempts. Then one day a few weeks later I noticed that I had internet even though I had not plugged in my ethernet cable.

Ironically I cannot get my windows 7 virtual machine on the same computer to connect through wifi. My boss(also a github user but can’t find his account right now), our IT guy, and myself have spent hours and hours trying to get it to work over the last year with windows 7 and no success. I have to use an adapter for that one as well.

Источник

Error cannot find any interfaces in mode monitor

Wifite2 does not work on Raspberry Pi 3 Model B:

Created at 1 year ago

I had this issue, and used «airmon-ng check kill» before running wifite, and then it ran fine.

Created at 4 years ago

Please provide the output of these commands:

airodump-ng start wlan0

So I can dive deeper.

Created at 4 years ago

Here’s what comes up when first running wifite after a fresh boot:

[+] enabling monitor mode on wlan0. failed
failed

[!] Error: Cannot find any interfaces in Mode:Monitor

[!] Full stack trace below

[!] Traceback (most recent call last):
[!] File «/root/wifite2/wifite/wifite.py», line 236, in run
[!] w.main()
[!] File «/root/wifite2/wifite/wifite.py», line 46, in main
[!] Configuration.get_monitor_mode_interface()
[!] File «/root/wifite2/wifite/config.py», line 113, in get_monitor_mode_interface
[!] Configuration.interface = Airmon.ask()
[!] File «/root/wifite2/wifite/tools/airmon.py», line 311, in ask
[!] iface.interface = Airmon.start(iface)
[!] File «/root/wifite2/wifite/tools/airmon.py», line 183, in start
[!] raise Exception(«Cannot find any interfaces in Mode:Monitor»)
[!] Exception: Cannot find any interfaces in Mode:Monitor

And then ran airodump-ng start wlan0 and then iwconfig: https://cl.ly/rr6O
(for some reason i couldn’t copy over the text from vm easily)

Created at 4 years ago

airmon-ng is for putting wireless devices in/out of monitor mode.

airodump-ng is for scanning wireless networks using a device that is already in monitor mode.

What’s the output of this command:

airmon-ng start wlan0

Created at 4 years ago

@loskiq did u solve this issue?

Created at 4 years ago

Yeah can you give us the output of ifconfig and iwconfig

Created at 4 years ago

# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. wlan0 unassociated Nickname:» » Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0″>

Created at 4 years ago

Okay now what does it look like after
sudo airmon-ng start wlan0 && ifconfig

Created at 4 years ago

Excuse me. «sudo airmon-ng start wlan0 && iwconfig» instead

Created at 4 years ago

airmon-ng start wlan0 returns:

Same output for iwconfig

Created at 4 years ago

Your card rtl8814au needs a custom driver for monitor mode

Created at 4 years ago

@blmvxer aha! That made it work. I had https://github.com/zebulon2/rtl8814au drivers but they didn’t make monitor mode work

Created at 4 years ago

@blmvxer aha! That made it work. I had https://github.com/zebulon2/rtl8814au drivers but they didn’t make monitor mode work

anytime dude. If you need anymore help don’t hesitate to ask. 🙂

Created at 4 years ago

Pushing a collection of updates/fixes to the drivers inn a week.

Created at 4 years ago

Hey I have the same problem running kali in a VM with NAT network

this is the output of ‘ifconfig’

output of airmon-ng start wlan0

PHY Interface Driver Chipset

Created at 4 years ago

@amiralkizaru but do you have a USB wifi receiver?

Источник

   .               .   
 .´  ·  .     .  ·  `.  wifite 2.2.5
 :  :  :  (¯)  :  :  :  automated wireless auditor
 `.  ·  ` /¯ ´  ·  .´  https://github.com/derv82/wifite2
   `     /¯¯¯     ´   

 [!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki
 [!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool
 [!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools
 [!] Conflicting processes: NetworkManager (PID 524), wpa_supplicant (PID 646)
 [!] If you have problems: kill -9 PID or re-run wifite with --kill)                                                                                     

    Interface   PHY   Driver              Chipset                                                                                                         
-----------------------------------------------------------------------
 1. wlan0       null  r8188eu             Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter

 [+] enabling monitor mode on wlan0... failed
failed

 [!] Error: Cannot find any interfaces in Mode:Monitor
                                                                                                                                                          
 [!] Full stack trace below                                                                                                                               
                                                                                                                                                          
 [!]    Traceback (most recent call last):                                                                                                               
 [!]    File "/root/wifite2/wifite/__main__.py", line 93, in entry_point
 [!]        wifite.start()
 [!]    File "/root/wifite2/wifite/__main__.py", line 53, in start                                                                                       
 [!]        Configuration.get_monitor_mode_interface()
 [!]    File "/root/wifite2/wifite/config.py", line 132, in get_monitor_mode_interface                                                                   
 [!]        cls.interface = Airmon.ask()
 [!]    File "/root/wifite2/wifite/tools/airmon.py", line 319, in ask                                                                                     
 [!]        iface.interface = Airmon.start(iface)
 [!]    File "/root/wifite2/wifite/tools/airmon.py", line 190, in start                                                                                   
 [!]        raise Exception('Cannot find any interfaces in Mode:Monitor')
 [!]  Exception: Cannot find any interfaces in Mode:Monitor                                                                                               
                                                                                                                                                          
 [!] Exiting

So im getting this and idk what to do from here.

[!] Warning: Recommended app bully was not found. install @ https://github.com/aanarchyy/bully [!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki [!] Warning: Recommended app hashcat was not found. install @ https://hashcat.net/hashcat/ [!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool [!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools [!] Warning: Recommended app macchanger was not found. install @ apt-get install macchanger

Interface   PHY   Driver              Chipset 

1. wlan0 null ?????? non-mac80211 device? (report this!)

[+] enabling monitor mode on wlan0… failed failed

[!] Error: Cannot find any interfaces in Mode:Monitor

[!] Full stack trace below

[!] Traceback (most recent call last): [!] File «/usr/lib/python2.7/dist-packages/wifite/main.py», line 93, in entry_point [!] wifite.start() [!] File «/usr/lib/python2.7/dist-packages/wifite/main.py», line 53, in start [!] Configuration.get_monitor_mode_interface() [!] File «/usr/lib/python2.7/dist-packages/wifite/config.py», line 129, in get_monitor_mode_interface [!] cls.interface = Airmon.ask() [!] File «/usr/lib/python2.7/dist-packages/wifite/tools/airmon.py», line 319, in ask [!] iface.interface = Airmon.start(iface) [!] File «/usr/lib/python2.7/dist-packages/wifite/tools/airmon.py», line 190, in start [!] raise Exception(‘Cannot find any interfaces in Mode:Monitor’) [!] Exception: Cannot find any interfaces in Mode:Monitor

[!] Exiting

I try to start wifite on VMware (Kali) but doesnt work, is there a possibility to use the local network card (Intel(R) Dual Band Wireless-AC 3168) to let search the VM for available networks?

This is the error message i received:

root@kali:~# wifite
   .               .    
 .´  ·  .     .  ·  `.  wifite 2.2.5
 :  :  :  (¯)  :  :  :  automated wireless auditor
 `.  ·  ` /¯ ´  ·  .´  https://github.com/derv82/wifite2
   `     /¯¯¯     ´    
 [!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki
 [!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool
 [!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools
 [!] Conflicting processes: NetworkManager (PID 555), wpa_supplicant (PID 739), dhclient (PID 1454)
 [!] If you have problems: kill -9 PID or re-run wifite with --kill)
 [+] Checking airmon-ng...                                                                                                                                                               
 [!] airmon-ng did not find any wireless interfaces
 [!] Make sure your wireless device is connected
 [!] See http://www.aircrack-ng.org/doku.php?id=airmon-ng for more info
 [!] Error: airmon-ng did not find any wireless interfaces
 [!] Full stack trace below
 [!]    Traceback (most recent call last):
 [!]    File "/usr/lib/python2.7/dist-packages/wifite/__main__.py", line 93, in entry_point
 [!]        wifite.start()
 [!]    File "/usr/lib/python2.7/dist-packages/wifite/__main__.py", line 53, in start
 [!]        Configuration.get_monitor_mode_interface()
 [!]    File "/usr/lib/python2.7/dist-packages/wifite/config.py", line 129, in get_monitor_mode_interface
 [!]        cls.interface = Airmon.ask()
 [!]    File "/usr/lib/python2.7/dist-packages/wifite/tools/airmon.py", line 299, in ask
 [!]        raise Exception('airmon-ng did not find any wireless interfaces')
 [!]  Exception: airmon-ng did not find any wireless interfaces
 [!] Exiting*

@blmvxer
here :
[ 0.000000] Linux version 4.18.0-kali3-amd64 (devel@kali.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.20-2kali2 (2018-11-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali3-amd64 root=UUID=6dd998d9-9743-48ab-9a30-6a2953e0d2fa ro initrd=/install/initrd.gz quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR variable ranges disabled: [ 0.000000] Disabled [ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000000] CPU MTRRs all blank - virtualized system. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [(____ptrval____)] [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.000000] BRK [0x16851000, 0x16851fff] PGTABLE [ 0.000000] BRK [0x16852000, 0x16852fff] PGTABLE [ 0.000000] BRK [0x16853000, 0x16853fff] PGTABLE [ 0.000000] BRK [0x16854000, 0x16854fff] PGTABLE [ 0.000000] BRK [0x16855000, 0x16855fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1d12a000-0x1f50afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX ) [ 0.000000] ACPI: XSDT 0x000000001FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 0.000000] ACPI: FACP 0x000000001FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 0.000000] ACPI: DSDT 0x000000001FFF0470 0021FF (v02 VBOX VBOXBIOS 00000002 INTL 20100528) [ 0.000000] ACPI: FACS 0x000000001FFF0200 000040 [ 0.000000] ACPI: FACS 0x000000001FFF0200 000040 [ 0.000000] ACPI: APIC 0x000000001FFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061) [ 0.000000] ACPI: SSDT 0x000000001FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffeffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1ffeb000-0x1ffeffff] [ 0.000000] kvm-clock: cpu 0, msr 0:1ffe2001, primary cpu clock [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 16442296852 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffeffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffeffff] [ 0.000000] Reserved but unavailable: 114 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffeffff] [ 0.000000] On node 0 totalpages: 130958 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1984 pages used for memmap [ 0.000000] DMA32 zone: 126960 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] [mem 0x20000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576 [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128889 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-kali3-amd64 root=UUID=6dd998d9-9743-48ab-9a30-6a2953e0d2fa ro initrd=/install/initrd.gz quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 455436K/523832K available (10252K kernel code, 1227K rwdata, 3256K rodata, 1568K init, 656K bss, 68396K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 31279 entries in 123 pages [ 0.004000] Hierarchical RCU implementation. [ 0.004000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. [ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.004000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] ACPI: Core revision 20180531 [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] x2apic enabled [ 0.004000] Switched APIC routing to physical x2apic. [ 0.007834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.008007] tsc: Detected 2591.596 MHz processor [ 0.008018] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x255b3928676, max_idle_ns: 440795202126 ns [ 0.008021] Calibrating delay loop (skipped) preset value.. 5183.19 BogoMIPS (lpj=10366384) [ 0.008026] pid_max: default: 32768 minimum: 301 [ 0.008094] Security Framework initialized [ 0.008096] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.008131] AppArmor: AppArmor initialized [ 0.008260] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.008318] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.008334] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.008338] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.012133] mce: CPU supports 0 MCE banks [ 0.012165] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.012167] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.012171] Spectre V2 : Mitigation: Full generic retpoline [ 0.012172] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.012174] Speculative Store Bypass: Vulnerable [ 0.012487] Freeing SMP alternatives memory: 24K [ 0.016000] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.016000] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.016000] Hierarchical SRCU implementation. [ 0.016000] NMI watchdog: Perf event create on CPU 0 failed with -2 [ 0.016000] NMI watchdog: Perf NMI watchdog permanently disabled [ 0.016000] smp: Bringing up secondary CPUs ... [ 0.016000] x86: Booting SMP configuration: [ 0.016000] .... node #0, CPUs: #1 [ 0.004000] kvm-clock: cpu 1, msr 0:1ffe2041, secondary cpu clock [ 0.004000] mce: CPU supports 0 MCE banks [ 0.016053] smp: Brought up 1 node, 2 CPUs [ 0.016053] smpboot: Max logical packages: 1 [ 0.016053] smpboot: Total of 2 processors activated (10366.38 BogoMIPS) [ 0.016254] devtmpfs: initialized [ 0.016254] x86/mm: Memory block size: 128MB [ 0.016851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.016851] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.016851] pinctrl core: initialized pinctrl subsystem [ 0.017491] NET: Registered protocol family 16 [ 0.020037] audit: initializing netlink subsys (disabled) [ 0.020090] audit: type=2000 audit(1544181824.882:1): state=initialized audit_enabled=0 res=1 [ 0.020288] cpuidle: using governor ladder [ 0.020288] cpuidle: using governor menu [ 0.020288] ACPI: bus type PCI registered [ 0.020288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.020427] PCI: Using configuration type 1 for base access [ 0.024223] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.024223] ACPI: Added _OSI(Module Device) [ 0.024223] ACPI: Added _OSI(Processor Device) [ 0.024223] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.024223] ACPI: Added _OSI(Processor Aggregator Device) [ 0.024223] ACPI: Added _OSI(Linux-Dell-Video) [ 0.031337] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.035717] ACPI: Interpreter enabled [ 0.035750] ACPI: (supports S0 S5) [ 0.035752] ACPI: Using IOAPIC for interrupt routing [ 0.036451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.036833] ACPI: Enabled 2 GPEs in block 00 to 07 [ 0.052132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.052142] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.052188] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.052208] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.053014] PCI host bridge to bus 0000:00 [ 0.053020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.053025] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.053030] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.053035] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfdffffff window] [ 0.053040] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.053138] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.054533] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.056476] pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a [ 0.057504] pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f] [ 0.057908] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.057912] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.057916] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.057920] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.058544] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000 [ 0.063669] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref] [ 0.093069] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.094197] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff] [ 0.096333] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017] [ 0.101819] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000 [ 0.103172] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f] [ 0.104426] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff] [ 0.105341] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref] [ 0.109959] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100 [ 0.110317] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff] [ 0.110507] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f] [ 0.112516] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310 [ 0.113529] pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff] [ 0.121373] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000 [ 0.122628] pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI [ 0.122655] pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB [ 0.124122] pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601 [ 0.125714] pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247] [ 0.126692] pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b] [ 0.127745] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257] [ 0.128315] pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b] [ 0.129612] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f] [ 0.130721] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff] [ 0.137361] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11) [ 0.138124] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11) [ 0.138378] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11) [ 0.138625] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11) [ 0.139208] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.139208] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.140013] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.140015] vgaarb: loaded [ 0.140178] pps_core: LinuxPPS API ver. 1 registered [ 0.140180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.140187] PTP clock support registered [ 0.140214] EDAC MC: Ver: 3.0.0 [ 0.141149] PCI: Using ACPI for IRQ routing [ 0.141149] PCI: pci_cache_line_size set to 64 bytes [ 0.141149] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.141149] e820: reserve RAM buffer [mem 0x1fff0000-0x1fffffff] [ 0.144871] clocksource: Switched to clocksource kvm-clock [ 0.182800] VFS: Disk quotas dquot_6.6.0 [ 0.182834] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.183108] AppArmor: AppArmor Filesystem Enabled [ 0.183152] pnp: PnP ACPI init [ 0.183294] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.183519] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active) [ 0.185353] pnp: PnP ACPI: found 2 devices [ 0.200748] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.200766] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.200769] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.200773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.200776] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfdffffff window] [ 0.200889] NET: Registered protocol family 2 [ 0.201280] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes) [ 0.201300] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.201326] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.201353] TCP: Hash tables configured (established 4096 bind 4096) [ 0.201390] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.201397] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.201448] NET: Registered protocol family 1 [ 0.201464] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.201518] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.201638] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.204300] PCI: CLS 0 bytes, default 64 [ 0.204382] Unpacking initramfs... [ 1.530367] Freeing initrd memory: 36740K [ 1.530486] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b3928676, max_idle_ns: 440795202126 ns [ 1.530540] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.531580] Initialise system trusted keyrings [ 1.531788] workingset: timestamp_bits=40 max_order=17 bucket_order=0 [ 1.536776] zbud: loaded [ 1.537479] pstore: using deflate compression [ 1.970634] Key type asymmetric registered [ 1.970637] Asymmetric key parser 'x509' registered [ 1.970716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.970841] io scheduler noop registered [ 1.970843] io scheduler deadline registered [ 1.970897] io scheduler cfq registered (default) [ 1.970900] io scheduler mq-deadline registered [ 1.971206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.971228] intel_idle: Please enable MWAIT in BIOS SETUP [ 1.971606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.972945] Linux agpgart interface v0.103 [ 1.973151] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.973152] AMD IOMMUv2 functionality not available on this system [ 1.973594] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.974367] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.974374] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.974725] mousedev: PS/2 mouse device common for all mice [ 1.975749] rtc_cmos rtc_cmos: registered as rtc0 [ 1.975864] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.976192] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 1.976312] ledtrig-cpu: registered to indicate activity on CPUs [ 1.976882] NET: Registered protocol family 10 [ 1.984874] Segment Routing with IPv6 [ 1.984923] mip6: Mobile IPv6 [ 1.984926] NET: Registered protocol family 17 [ 1.984932] mpls_gso: MPLS GSO support [ 1.985365] sched_clock: Marking stable (1985165894, 0)->(2799325902, -814160008) [ 1.986463] registered taskstats version 1 [ 1.986465] Loading compiled-in X.509 certificates [ 2.047504] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 2.047539] zswap: loaded using pool lzo/zbud [ 2.048048] AppArmor: AppArmor sha1 policy hashing enabled [ 2.048698] rtc_cmos rtc_cmos: setting system clock to 2018-12-07 11:23:28 UTC (1544181808) [ 2.056767] Freeing unused kernel image memory: 1568K [ 2.072676] Write protecting the kernel read-only data: 16384k [ 2.074131] Freeing unused kernel image memory: 2028K [ 2.074631] Freeing unused kernel image memory: 840K [ 2.106754] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.106756] x86/mm: Checking user space page tables [ 2.136367] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.489712] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.489714] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.499223] SCSI subsystem initialized [ 2.511261] piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0 [ 2.515848] ACPI: bus type USB registered [ 2.515895] usbcore: registered new interface driver usbfs [ 2.515916] usbcore: registered new interface driver hub [ 2.515968] usbcore: registered new device driver usb [ 2.524106] libata version 3.00 loaded. [ 2.526871] ata_piix 0000:00:01.1: version 2.13 [ 2.549579] ahci 0000:00:0d.0: version 3.0 [ 2.549592] cryptd: max_cpu_qlen set to 1000 [ 2.551606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.552264] ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled [ 2.552568] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 2.552574] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc [ 2.553238] scsi host1: ahci [ 2.553660] ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21 [ 2.553680] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.554860] ehci-pci: EHCI PCI platform driver [ 2.555711] ohci-pci: OHCI PCI platform driver [ 2.557160] ohci-pci 0000:00:06.0: OHCI PCI host controller [ 2.557171] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1 [ 2.557314] ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000 [ 2.561638] scsi host0: ata_piix [ 2.567955] AVX version of gcm_enc/dec engaged. [ 2.567956] AES CTR mode by8 optimization enabled [ 2.574314] scsi host2: ata_piix [ 2.574455] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 [ 2.574458] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 [ 2.617098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 2.617103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.617107] usb usb1: Product: OHCI PCI host controller [ 2.617111] usb usb1: Manufacturer: Linux 4.18.0-kali3-amd64 ohci_hcd [ 2.617114] usb usb1: SerialNumber: 0000:00:06.0 [ 2.617584] hub 1-0:1.0: USB hub found [ 2.617746] hub 1-0:1.0: 12 ports detected [ 2.631310] alg: No test for pcbc(aes) (pcbc-aes-aesni) [ 2.747427] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.749010] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 [ 2.880761] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.880957] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 [ 2.880960] ata3.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 32) [ 2.881214] ata3.00: configured for UDMA/133 [ 2.884260] scsi 1:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 [ 2.885206] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 [ 2.900263] sd 1:0:0:0: [sda] 167772160 512-byte logical blocks: (85.9 GB/80.0 GiB) [ 2.900274] sd 1:0:0:0: [sda] Write Protect is off [ 2.900278] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.900293] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.928605] sda: sda1 sda2 < sda5 > [ 2.929120] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.981358] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray [ 2.981361] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.981684] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.016316] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:95:8c:5e [ 3.016325] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.034800] random: fast init done [ 3.084388] usb 1-1: new full-speed USB device number 2 using ohci-pci [ 3.352772] PM: Image not found (code -22) [ 3.411764] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021, bcdDevice= 1.00 [ 3.411769] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.411773] usb 1-1: Product: USB Tablet [ 3.411776] usb 1-1: Manufacturer: VirtualBox [ 3.437270] hidraw: raw HID events driver (C) Jiri Kosina [ 3.453002] usbcore: registered new interface driver usbhid [ 3.453003] usbhid: USB HID core driver [ 3.457074] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input3 [ 3.457847] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0 [ 4.214673] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.825333] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.825387] systemd[1]: Detected virtualization oracle. [ 7.825399] systemd[1]: Detected architecture x86-64. [ 7.838611] systemd[1]: Set hostname to <kali>. [ 9.699372] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699548] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.699610] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699783] systemd[1]: Listening on udev Control Socket. [ 9.699806] random: systemd: uninitialized urandom read (16 bytes read) [ 9.699956] systemd[1]: Listening on Journal Socket. [ 9.704670] systemd[1]: Mounting POSIX Message Queue File System... [ 9.706497] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.706860] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.852948] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.059093] systemd-journald[279]: Received request to flush runtime journal from PID 1 [ 13.176992] random: crng init done [ 13.176994] random: 7 urandom warning(s) missed due to ratelimiting [ 13.794049] ACPI: AC Adapter [AC] (on-line) [ 13.806683] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.806837] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 13.925360] ACPI: Battery Slot [BAT0] (battery present) [ 13.940759] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 13.940795] ACPI: Power Button [PWRF] [ 13.940983] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input6 [ 13.941005] ACPI: Sleep Button [SLPF] [ 14.107330] vboxguest: loading out-of-tree module taints kernel. [ 14.140823] vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds [ 14.140986] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input7 [ 14.141132] vboxguest: misc device minor 58, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000) [ 14.141134] vboxguest: Successfully loaded version 5.2.22_Debian (interface 0x00010004) [ 14.142299] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 14.252463] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 14.252610] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 14.315188] [drm] VRAM 08000000 [ 14.315431] [TTM] Zone kernel: Available graphics memory: 248318 kiB [ 14.315432] [TTM] Initializing pool allocator [ 14.315440] [TTM] Initializing DMA pool allocator [ 14.320618] fbcon: vboxdrmfb (fb0) is primary device [ 14.332343] Console: switching to colour frame buffer device 100x37 [ 14.357564] vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device [ 14.381985] [drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0 [ 14.428308] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 10737418240 ms ovfl timer [ 14.428310] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules [ 14.428312] RAPL PMU: hw unit of domain package 2^-0 Joules [ 14.428314] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules [ 15.677210] snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000 [ 15.857391] Adding 2095100k swap on /dev/sda5. Priority:-2 extents:1 across:2095100k FS [ 22.192293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.197406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.200169] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 22.201032] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Была ли эта страница полезной?

0 / 5 — 0 рейтинги