Error cannot load transport file

Ответы на вопрос «Cannot load transport file. Что делать?» на форуме MyDiv

+

0

-

1

27.08.2017, 13:23

Данная ошибка говорит о том, что вы, по какой-то причине, не можете загрузить файл на свой компьютер. Попробуйте отключить антивирус, брандмауэр или другое программное обеспечение, способное блокировать соединение.

+

0

-

1

04.01.2018, 07:40

А что делать, если никаких антивирусов нет? ТВ на Андроид. Установлен только плеер. День работает, а на следующий день cannot get transport file. На телефоне всё работает прекрасно. Проблема в чём то другом.

+

0

-

0

19.11.2020, 20:24

На радостях поделюсь со страдающими от этой хвори плеера-мне помогла установка Ace Stream той же версии 3.1.32 через InstallPack!Пробуйте, авоь и вам повезет!Исаак.

+

0

-

0

23.11.2020, 16:53

Я похвастался в прошлом комменте,что помогла уст-ка Асе через InstallPack но,увы,на пару сеансов,а потом-эта песня хороша…Но вопрос в том,что если порядок продержался сколько-то,а потом возврат к ошибке,то что-то ломается,а что-подскажите,пожалуйста,спецы и любители,коим что-то помогло как избавиться от ошибки,поклонюсь Вам в ножки за такую услугу.Исаак.

+

0

-

0

25.11.2020, 05:28

Здравствуйте

Источник

Hi This is update about :
[aperfeito@alarm HTTPAceProxy]$ sudo python2 acehttp.py
[sudo] password for aperfeito:

acehttp.py           [LINE:463 ]# DEBUG    [24.05 13:21:37]  Ace Stream HTTP Proxy server IP: 172.27.60.210 autodetected
acehttp.py           [LINE:469 ]# INFO     [24.05 13:21:37]  Ace Stream HTTP Proxy server starting .....
acehttp.py           [LINE:470 ]# DEBUG    [24.05 13:21:37]  Using python 2.7.15
acehttp.py           [LINE:471 ]# DEBUG    [24.05 13:21:37]  **Using gevent 1.3.1 ---> Look**
acehttp.py           [LINE:472 ]# DEBUG    [24.05 13:21:37]  Using psutil 5.4.5
acehttp.py           [LINE:473 ]# DEBUG    [24.05 13:21:37]  Using requests 2.18.4
acehttp.py           [LINE:474 ]# DEBUG    [24.05 13:21:37]  Using bencode 2.0
acehttp.py           [LINE:515 ]# INFO     [24.05 13:21:37]  Remote Ace Stream engine found on 127.0.0.1:6878
acehttp.py           [LINE:534 ]# INFO     [24.05 13:21:37]  Load Ace Stream HTTP Proxy plugins .....
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: Torrenttv
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: P2pproxy
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: Stat
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: Torrenttelik
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: Torrentfilms
acehttp.py           [LINE:542 ]# DEBUG    [24.05 13:21:37]  Plugin loaded: Allfon
acehttp.py           [LINE:548 ]# INFO     [24.05 13:21:37]  Server started at 172.27.60.210:8000 Use <Ctrl-C> to stop

Example using vlc as client and put your example look whats happend with Proxy:

Accepted connection from 172.27.60.210 path /content_id/5e9f075c9f6703b4dd355f649c424d715570e51b/stream.mp4
acehttp.py           [LINE:98  ]# DEBUG    [24.05 13:24:36]  Headers: {'host': '172.27.60.210:8000', 'accept-language': 'en_US', 'range': 'bytes=0-', 'accept': '*/*', 'user-agent': 'VLC/4.0.0-dev LibVLC/4.0.0-dev'}
aceclient.py         [LINE:80  ]# DEBUG    [24.05 13:24:36]  Successfully connected to AceStream on 127.0.0.1:62062
clientcounter.py     [LINE:24  ]# DEBUG    [24.05 13:24:36]  AceClient created
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:24:36]  >>> HELLOBG version=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:37]  <<< HELLOTS version=3.1.30 version_code=3013000 key=c38caa2f27 http_port=6878 bmode=0
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:24:37]  >>> READY key=n51LvQoTlJzNGaFxseRK-4d2a33d6d63c988164d2e42ff8ca5e786574330d
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:37]  <<< AUTH 0
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:24:37]  >>> USERDATA [{"gender": 1}, {"age": 5}]
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:24:37]  >>> SETOPTIONS use_stop_notifications=1
clientcounter.py     [LINE:26  ]# DEBUG    [24.05 13:24:37]  AceClient initialized
acehttp.py           [LINE:193 ]# WARNING  [24.05 13:24:37]  Create a broadcast "Eurosport HD"
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:24:37]  >>> START PID 5e9f075c9f6703b4dd355f649c424d715570e51b 0 output_format=http
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:37]  <<< STATE 1
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:37]  <<< STATUS main:starting
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:40]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:40]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:42]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:42]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:44]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:44]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:46]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:46]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:48]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:48]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:50]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:50]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:52]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:52]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:54]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:54]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:56]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:56]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:58]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:24:58]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:00]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:00]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:02]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:02]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:04]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:04]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:06]  <<< STATUS main:prebuf;0;0;0;0;0;0;0;0;0;0;0;0
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:06]  <<< EVENT livepos last=-1 live_first=-1 pos=-1 first_ts=0 last_ts=0 is_live=1 live_last=-1 buffer_pieces=3
**aceclient.py         [LINE:199 ]# ERROR    [24.05 13:25:07]  Engine response time exceeded. GetURL timeout!
acehttp.py           [LINE:79  ]# ERROR    [24.0**5 13:25:07]  AceClient exception: AceException('Engine response time exceeded. GetURL timeout!',)**
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:25:07]  >>> EVENT stop
aceclient.py         [LINE:116 ]# DEBUG    [24.05 13:25:07]  >>> STOP
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:07]  <<< STATE 0
acehttp.py           [LINE:216 ]# WARNING  [24.05 13:25:07]  Broadcast "Eurosport HD" stoped. Last client disconnected
aceclient.py         [LINE:299 ]# DEBUG    [24.05 13:25:07]  <<< STATUS main:idle

IN VLC SIDE WHAT HAPPENDS

vlc http://172.27.60.210:8000/content_id/5e9f075c9f6703b4dd355f649c424d715570e51b/stream.mp4
VLC media player 4.0.0-dev Otto Chriek (revision 4.0.0-dev-827-gcda6b57532)
shared memfd open() failed: Function not implemented
[b7db6b58] main libvlc: Running vlc with the default interface. Use ‘cvlc’ to use vlc without interface.
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast
No XVisualInfo for format QSurfaceFormat(version 2.0, options QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1, redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize -1, stencilBufferSize -1, samples -1, swapBehavior QSurfaceFormat::SwapBehavior(SingleBuffer), swapInterval 1, colorSpace QSurfaceFormat::ColorSpace(DefaultColorSpace), profile QSurfaceFormat::OpenGLContextProfile(NoProfile))
Falling back to using screens root_visual.
No XVisualInfo for format QSurfaceFormat(version 2.0, options QFlagsQSurfaceFormat::FormatOption(), depthBufferSize -1, redBufferSize 1, greenBufferSize 1, blueBufferSize 1, alphaBufferSize 0, stencilBufferSize -1, samples -1, swapBehavior QSurfaceFormat::SwapBehavior(SingleBuffer), swapInterval 1, colorSpace QSurfaceFormat::ColorSpace(DefaultColorSpace), profile QSurfaceFormat::OpenGLContextProfile(NoProfile))
Falling back to using screens root_visual.
[a4d00c00] access stream error: HTTP 500 error

Show anything the engine drop everytime by no response !!!

Источник

I want to build the efk logger system by docker compose.
Everything is setup, only fluentd has problem.

fluentd docker container logs

2022-02-15 02:06:11 +0000 [info]: parsing config file is succeeded path=»/fluentd/etc/fluent.conf»

2022-02-15 02:06:11 +0000 [info]: gem ‘fluent-plugin-elasticsearch’ version ‘5.0.3’

2022-02-15 02:06:11 +0000 [info]: gem ‘fluentd’ version ‘1.12.0’

/usr/local/lib/ruby/2.6.0/rubygems/core_ext/kernel_require.rb:54:in `require’: cannot load such file — elasticsearch/transport/transport/connections/selector (LoadError)

my directory:

 my project/
 ├─ fluentd/
 │  ├─ conf/
 │  │  └── fluent.conf
 │  └── Dockerfile
 └── docker-compose.yml

docker-compose.yml:

version: "3"
services:
  web:
    image: httpd
    ports:
      - "8010:80"
    depends_on:
      - fluentd
    logging:
      driver: "fluentd"
      options:
        fluentd-address: 127.0.0.1:24224
        fluentd-async: 'true'
        tag: httpd.access

  fluentd:
    build: ./fluentd
    volumes:
      - ./fluentd/conf:/fluentd/etc
    links:
      - "elasticsearch"
    ports:
      - "24224:24224"
      - "24224:24224/udp"

  elasticsearch:
    image: docker.elastic.co/elasticsearch/elasticsearch:7.13.1
    environment:
      - discovery.type=single-node
    expose:
      - 9200
    ports:
      - "9200:9200"

  kibana:
    image: docker.elastic.co/kibana/kibana:7.13.1
    links:
      - "elasticsearch"
    ports:
      - "5601:5601"

Dockerfile:

# fluentd/Dockerfile

FROM fluent/fluentd:v1.12.0-debian-1.0
USER root
RUN ["gem", "install", "fluent-plugin-elasticsearch", "--no-document", "--version", "5.0.3"]
USER fluent

fluent.conf:

<source>
  @type forward
  port 24224
  bind 0.0.0.0
</source>

<match *.**>
  @type copy

  <store>
    @type elasticsearch
    host elasticsearch
    port 9200
    logstash_format true
    logstash_prefix fluentd
    logstash_dateformat %Y%m%d
    include_tag_key true
    type_name access_log
    tag_key @log_name
    flush_interval 1s
  </store>

  <store>
    @type stdout
  </store>
</match>

Источник

Понравилась статья? Поделить с друзьями:

Читайте также:

  • Error alert is not defined no undef brackets
  • Error flashing partition device error
  • Error code 0x99256658 realme
  • Error access to radius
  • Error failed to add activate new connection not authorized to control networking

    • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии