Cause of incident:
Error code 1252 can be triggered by a number of reasons, so it is very crucial that you troubleshoot each of the possible reasons to avert it from reappearing.
This error pops up and hangs or crashes the live program window. Your personal computer repeatedly crashes with Error code 1252 when executing the same program. Windows runs sluggishly and responds slowly to mouse clicks or keyboard strokes. Your personal computer occasionally freezes for a few seconds at a time. Error code 1252 messages can display during program installation, Windows start-up or shutdown, or even during the installation of Microsoft Windows operating system. Keeping note of when and where Error code 1252 occurred is a essential piece of evidence while troubleshooting the issue.
Our Technical Experts will quickly and effectively fix Error code 1252 over chat & remote take over session and also confirm to prevent future incidence.
To resolve Office error code 1252 please follow simple instructions in this document.
1. Disable Windows Firewall.
1. Go to Control Panel and click on Windows Firewall.
2. Click on Turn Windows Firewall on or off.
Note: You will need Admin privileges to enable or disable Windows Firewall.
3. Click on Turn off Windows Firewall (not recommended) under each active network connection.
2. Change Proxy server settings.
1. Go to Control Panel and click on Internet Options.
2. Select Connections Tab and click on LAN setting.
3. Uncheck Use a proxy server for your LAN.
How to resolve Office error code 1252.
3. Check system integrity.
1. Press Windows + R and type CMD.
Note: You will need select Run as administrator.
2. Type sfc /scannow and press enter.
4. Check System Files For Error
1. Press Windows + R and type cleanmgr.
2. Select the OS Drive (usually C:) and Press OK.
3. Click on Clean up system files.
Note: If the issue is still not fixed please initiate a CHAT SESSION with our Technical expert. Our Technical experts will be glad to assist you.
I am working on an application in Xamarin
for Visual Studio 2017
. I am attempting to test my application on Android
and iOS
live player devices.
When I try to run it, I get the following error on my device (Android
and iOS
):
Level=Error, Title=Visualization Error, Message=Encoding 1252 data
could not be found. Make sure you have correct international codeset
assembly installed and enabled. (NotSupportedException)
I have found similar issues through Google
searching, but after making the changes, it still will not run. I have checked all Internationalization options for both devices, and I have even saved directly as UTF-8
encoding, as I figured it may be an issue with encoding windows-1252
. I also referenced the I18N.dll
to the I18N.West.dll
for both.
Any help would be greatly appreciated. Thank you.
Update:
I have been able to narrow down the issue further.
using (SqlConnection sqlConn = new
SqlConnection(Configuration.ConnectionString))
{
//sqlConn.Open();
}
The .open
was causing the encoding error. After commenting it out, the app will run on the live device, however, I now get:
Level=Error, Title=Uncaught Exception, Message=Encoding 1252 data could not be found. Make sure you have correct international codeset assembly installed and enabled. (NotSupportedException)
And Visual Studio 2017
throws the following error
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at
using (SqlConnection sqlConn = new
SqlConnection(Configuration.ConnectionString))
It occurs the moment it tries to pull from the database at the using
statement above. I am using SQL Server 2008 R2
. All I can tell is that it is having an issue with sending to and receiving from the SQL Server with Android
and iOS
.
Update 2:
After using some Exception Handlers
, I boiled it down to this inner exception:
{System.NotSupportedException: Encoding 1252 data could not be found. Make sure you have correct international codeset assembly installed and enabled.
at System.Text.Encoding.GetEncoding (System.Int32 codepage) [0x0023f] in <896ad1d315ca4ba7b117efb8dacaedcf>:0
at Mono.Data.Tds.TdsCharset.GetEncodingFromSortOrder (System.Int32 sortId) [0x00022] in :0
at Mono.Data.Tds.TdsCharset.GetEncodingFromSortOrder (System.Byte[] collation) [0x00006] in :0
at Mono.Data.Tds.TdsCharset.GetEncoding (System.Byte[] collation) [0x00008] in :0
at Mono.Data.Tds.Protocol.Tds.ProcessEnvironmentChange () [0x00229] in :0
at Mono.Data.Tds.Protocol.Tds.ProcessSubPacket () [0x00129] in :0
at Mono.Data.Tds.Protocol.Tds.NextResult () [0x00039] in :0
at Mono.Data.Tds.Protocol.Tds.SkipToEnd () [0x00000] in :0
at Mono.Data.Tds.Protocol.Tds70.Connect (Mono.Data.Tds.Protocol.TdsConnectionParameters connectionParameters) [0x0058e] in :0
at Mono.Data.Tds.Protocol.Tds80.Connect (Mono.Data.Tds.Protocol.TdsConnectionParameters connectionParameters) [0x00000] in :0
at System.Data.SqlClient.SqlConnection.Open () [0x00245] in <868a6461786e4884ac572c5e90a6b7fd>:0
at System.Data.Common.DbDataAdapter.QuietOpen (System.Data.IDbConnection connection, System.Data.ConnectionState& originalState) [0x0000c] in <868a6461786e4884ac572c5e90a6b7fd>:0
at System.Data.Common.DbDataAdapter.FillInternal (System.Data.DataSet dataset, System.Data.DataTable[] datatables, System.Int32 startRecord, System.Int32 maxRecords, System.String srcTable, System.Data.IDbCommand command, System.Data.CommandBehavior behavior) [0x0002d] in <868a6461786e4884ac572c5e90a6b7fd>:0
at System.Data.Common.DbDataAdapter.Fill (System.Data.DataSet dataSet, System.Int32 startRecord, System.Int32 maxRecords, System.String srcTable, System.Data.IDbCommand command, System.Data.CommandBehavior behavior) [0x00069] in <868a6461786e4884ac572c5e90a6b7fd>:0
at System.Data.Common.DbDataAdapter.Fill (System.Data.DataSet dataSet) [0x00029] in <868a6461786e4884ac572c5e90a6b7fd>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (System.Reflection.MonoMethod,object,object[],System.Exception&)
at System.Reflection.MonoMethod.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00032] in <896ad1d315ca4ba7b117efb8dacaedcf>:0 }
Which occurs at:
DataSet ds = new DataSet();
SqlDataAdapter da = new SqlDataAdapter(cmd);
da.Fill(ds);
- Remove From My Forums
-
Question
-
User308166 posted
Hi,
I’m getting a «1252 encoding not found» error on an Android device in release mode (in debug mode everything is fine).
I’m using Visual Studio 2015.
I think the error occurs when trying to setup a connection to sql server.Googling for an answer, I found a solution : Android project properties, Android Options, Linker tab, check «West» at additional supported encodings. And it worked! However, then I published a newer version of the app (with the «West» checked), but now I get the «1252 encoding not found» again. No matter what I do, I can’t get rid of it.
Please help.
Answers
-
User308166 posted
Hi Guilherme,
Thanks for your answer. Unfortunately, it didn’t do the trick.
In the meantime, I have found a solution —> setting Linking to «SDK assemblies only» helped. Before, it was set to «SDK and User Assemblies». The reason I had set it to SDK + User, was to fix a previous problem —> «The «LinkAssemblies» task failed unexpectedly». I have now found a different solution to this previous problem —> remove reference Xamarin.iOS on the Android project (I’m wondering why it’s there at all).To be quite honest, this all seems a bit quirky and counter-intuitive to me. But then again, this is my first xamarin project.
-
Marked as answer by
Thursday, June 3, 2021 12:00 AM
-
Marked as answer by
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS
Contact US
Thanks. We have received your request and will respond promptly.
Log In
Come Join Us!
Are you a
Computer / IT professional?
Join Tek-Tips Forums!
- Talk With Other Members
- Be Notified Of Responses
To Your Posts - Keyword Search
- One-Click Access To Your
Favorite Forums - Automated Signatures
On Your Posts - Best Of All, It’s Free!
*Tek-Tips’s functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.
Posting Guidelines
Promoting, selling, recruiting, coursework and thesis posting is forbidden.
Students Click Here
Error code 1252 Compiled code too longError code 1252 Compiled code too long(OP) 2 Mar 03 08:50 Hi, Red Flag SubmittedThank you for helping keep Tek-Tips Forums free from inappropriate posts. |
Join Tek-Tips® Today!
Join your peers on the Internet’s largest technical computer professional community.
It’s easy to join and it’s free.
Here’s Why Members Love Tek-Tips Forums:
Talk To Other Members
- Notification Of Responses To Questions
- Favorite Forums One Click Access
- Keyword Search Of All Posts, And More…
Register now while it’s still free!
Already a member? Close this window and log in.
Join Us Close
Another day, another surprise on .NET Core. Tried to load a file with Windows-1252 encoding and got the following exception: NotSupportedException: No data is available for encoding 1252. For information on defining a custom encoding, see the documentation for the Encoding.RegisterProvider method. Here’s how to solve the problem.
Adding missing encodings
It turns out that some “exotic” encodings (including popular Windows-1252) are defined in separate NuGet package and these encodings are not available by default.
Solution is simple. Add System.Text.Encoding.CodePages NuGet package to solution and use the following piece of code in application startup class to registester new encodings.
public void ConfigureServices(IServiceCollection services)
{
Encoding.RegisterProvider(CodePagesEncodingProvider.Instance);// more code here
}
Changing encoding of text
Now let’s convert file in Windows-1252 encoding to UTF-8.
var path = "c:\temp\observations.txt";var estEncoding = Encoding.GetEncoding(1252);
var est= File.ReadAllText(path, estEncoding);
var utf = Encoding.UTF8;
est = utf.GetString(Encoding.Convert(estEncoding, utf, estEncoding.GetBytes(est)));
Important thing in the code above is using Windows-1252 encoding when reading contents of file. With out specifying encoding it is expected that file is in UTF-8 already.
Gunnar Peipman
Gunnar Peipman is ASP.NET, Azure and SharePoint fan, Estonian Microsoft user group leader, blogger, conference speaker, teacher, and tech maniac. Since 2008 he is Microsoft MVP specialized on ASP.NET.
If you are moving from the .Net framework to .Net core, you may come across many issues.
Especially if you are reading something from excel you may get below issue somewhere around the process.
«No data is available for encoding 1252. For information on defining a custom encoding, see the documentation for the Encoding.RegisterProvider method.»
This happens due to the encoding difference in .Net core.
This issue can be easily be fixed by adding the below line of code in your excel handling methods.
System.Text.Encoding.RegisterProvider(System.Text.CodePagesEncodingProvider.Instance);
Don’t forget to add the corresponding NuGet package also.
So while excel reading may look like this.
System.Text.Encoding.RegisterProvider(System.Text.CodePagesEncodingProvider.Instance); FileStream stream = File.Open(ExcelRepFile, FileMode.Open, FileAccess.Read); IExcelDataReader excelReader = null; try { if (ExcelRepFile.EndsWith(".xls")) { excelReader = ExcelReaderFactory.CreateBinaryReader(stream); } if (ExcelRepFile.EndsWith(".xlsx")) { excelReader = ExcelReaderFactory.CreateOpenXmlReader(stream); } } catch (Exception) { throw; }
Thanks for reading How to fix «No data is available for encoding 1252» error with ExcelReaderFactory in .Net Core