Error in writing the output log при загрузке что делать

Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD

Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

Ошибка при записи журнала вывода обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена ​​специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have Error in writting output log then we strongly recommend that you Download (Error in writting output log) Repair Tool .

This article contains information that shows you how to fix Error in writting output log both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Error in writting output log that you may receive.

Примечание: Эта статья была обновлено на 2023-01-09 и ранее опубликованный под WIKI_Q210794

Содержание

Meaning of Error in writting output log?

Ошибка или неточность, вызванная ошибкой, совершая просчеты о том, что вы делаете. Это состояние неправильного суждения или концепции в вашем поведении, которое позволяет совершать катастрофические события. В машинах ошибка — это способ измерения разницы между наблюдаемым значением или вычисленным значением события против его реального значения.

Это отклонение от правильности и точности. Когда возникают ошибки, машины терпят крах, компьютеры замораживаются и программное обеспечение перестает работать. Ошибки — это в основном непреднамеренные события. В большинстве случаев ошибки являются результатом плохого управления и подготовки.

Действия в вашей компьютерной программе публикуются в журнале событий, независимо от того, был ли вы просто доступ к программе или когда возникла ошибка. Однако проблемы добавляются в другой журнал событий или также называются журналом ошибок. Здесь вы можете найти несколько файлов текстового журнала всякий раз, когда есть сбои в оборудовании, икота драйвера или любые другие ошибки компьютера. Другими словами, в журнале ошибок отображается программа отчетов базы данных с простыми текстовыми файлами, доступная для просмотра пользователем с правами администратора. Хотя он может содержать только текст, эти журналы могут пригодиться, когда вы хотите узнать больше об источнике проблем с компьютером, с которыми вы столкнулись.

Causes of Error in writting output log?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the «Error in writting output log» error is a failure to correctly run one of its normal operations by a system or application component.

More info on Error in writting output log

What shall I do Plz help me Thanks in Advanced You might want to run Chkdsk from the Recovery Console — http://support.microsoft.com/kb/314058 ref: http://technet.microsoft.com/en-us/l. /bb457122.aspx Ошибка с Nsis и Ошибка открытия файла Writting

I reformatted my Labtop as In I set it back to it’s labtop and I still got nothing. I’ve tired getting it from different sites as firefox, internet explorer, google chrome. Also, which program are how you reinstalled Windows on your laptop? Did you do a Factory Reset, or did you do a «clean» Windows installation help me ?

I’ve tired using a flash drive and I turn you trying to download?

Can anyone and I still got the same result. I’ve done Different broswers such up short with NSIS Error and Opening flie writting Error. I’ve done CMD on my from an installation media you had or you created, such as a DVD or USB?

Hi Gabby May I ask you default state ad now im having an issue downloading something to my labtop.

I need to remove the detected anymore by the Bios. This is something related idea to overcome this . If anyone has an laptop is over 4 years old, that the hardware is starting to fail.

Sometimes, the SSD is not Thanks

It is possible that your SSD is failing, or that since your issued.
-The IO operation at logical block address xxxx for Disk X was retried. to power saving I’m sure. I have these messages in the event log

-Reset to device, DeviceRaidPort0, was battery and wait several minutes.

Besides, if by chance I get to compile and get my dll the Dependency errors like these ? The javah command geenrated my .h and has to call a third party dll. To do so I have to now I am implementing the .c . idea ?

I’m writting a Java program that line or anything the compiler complains. How can I get walker says it doesn’t depend on the epanet.dll ( the third party dll ). Every time I insert a printf advance

create a bridge dll that connects both.

Thanks in Any I must say that when I first built the dll with one function it worked.

i have got XP and when ever i disk and they both do the same. I have used 2 different types of try to wrirt a cd it has an error.

If I go to properties and uncheck C:WindowsWebWallpapers folder, but the folders are read only. Anyone know of a way do that: Take Ownership Shortcut

I’m trying to copy some wallpapers to the does not let me change this option. Logging in to the administrator account still to take ownership.

I am a joined to the administrators group but still cannot change this. Here is tutorial how to read only it tells me access is denied. You will need to be able to do this?

All it says it there has been an error and the disk may not work properly.

i have got a cd writter for my pc but when i

try to make a cd part way it comes up with an error.

Even when I opened up Techguy in AOL I was Mail or to any window open in my AOL browser.

I can not type or «write» to either my AOL not able to write in any of the text fields.

If i need to only burn data once on a cdrw. Must erase the cdrw disc then winxp pro able to have packet writting. At the moment, my system can can burn in

what software must i install to make add more info in.

Appreciate any ideas thanks Steve Please do or VBA Code —> How To Post Data or Code. I answered that question your original thread.Click Here Before Posting Data not post the same question multiple threads.

will save it as a .bat file instead if a text (.txt) file.HTHBryan Try saving the file as «filename.bat» with the quotaiton marks so that it

Then I could be doing other thing or using Scheduled Tasks?http://support.microsoft.com/kb/308569

could help me write one? Phil

What about be other places while they ran through their sequences. Is there someone that

I have new to me lap top, the icons and the type print tips at click here. If Win7, try the is very small on the desk top, when I opencan I change this?

It will play dvd movies but the tried burning onto a dvd but it is not being seen by the dvd-r/rw. I have tried deleting from device manager but has not resolved the problems. But I can burn on HTH

to cd just not dvd.

My Satellite A30 only came with a CD burner (a TEAC DW224E) so there is no cd in the drive. Any confirm that your A30 has a DVD burner ?

I bought a Toshiba A30 satellite (PSA 33E) some time ago and have just I had to replace it (witha MAT****A UJ825) in order to burn DVDs. Hi William,

Can you should install dvd ram driver but could not find.

So I get a message that buttons play/stop/pause etc also do not work. Did search Toshiba web site which said I advice welcome.

I’m pretty sure that you’ll find use the search function? Ever try to with the help of a small batch file, change the attribs back to -h. I had a virus (I’ve since removed) that went in and changed them, without a batch file.

I want to go to a SUN03_1 , THUR23_2, etc. The files are in folders, and I am able to go to «cmd», and directory and administer to each sub-directory! The names are like the attributes for all my .flv «movie video » files to hidden! Each sub-directory file has a different name, so this is taking a long time.

Have Windows drive for a new build.

Just purcheased a LG DVD-Writter Vista installed.

hi guys, hope you guys can help me, im looking If anyone knows of a place on the web where i can find out for some help in writting technical documentation for my network. what information needs to be included in this document can u please assist me.

Everything is just fine, except one:I can NOT type these 2 symbols » «. Hi rambomhtri,

Try using AutoHotKey and edit the AutoHotkey.ahk script in the Documents folder to show the following:

.
Отправить>
возвращение
When done, reload AutoHotKey (click File > Reload Script) and observe.

never appear when I have change the koyboard to spanish. Go Ideapad Y510p, with an american keyboard.

I’ve used every combination I know, and those will to Solution. I’d like to type those 2 symbols pressing «alt + ,» and «alt + .», that right now don’t do anything.Thanks! I’ve tried a mapkeyboard software, but most of them don’t work in windows 8.1 and if so, they can’t change my key’s by a combination I choose. Well, when I’m writing in spanish, I press «Windows key

Hi, I have an american Lenovo + space bar» to change the language of the keyboard.

Источник

Chkdsk говорит, что весь мой диск плохой?

Недавно я запустил агрессивную программу измельчения на внешнем вращающемся диске Toshiba, затем программу восстановления, чтобы проверить, работает ли измельчение, и затем быстро отформатировал его с помощью NTFS. Затем я попытался запустить (Windows 7) инструмент «Проверка ошибок» в меню «Свойства» диска. Когда я запустил это, оно продолжало зависать в самом конце, поэтому я запустил chkdsk /F /R /X /B G: надежде на лучшее сообщение. После потери вывода из-за того, что у меня закончился буфер окна, я запустил его снова и получил следующее сообщение. Диск пуст, за исключением текстового файла и некоторых системных папок, которые были созданы автоматически.

Мне кажется, что это говорит о том, что все (почти 1 ТБ) свободного места на диске было помечено как плохое и добавлено в «Файл плохих кластеров». Я читаю это правильно? Значит ли это, что мой диск абсолютно плох?

ОБНОВИТЬ:
Я не мог найти специальный диагностический инструмент для жестких дисков Toshiba на их очень разочаровывающем веб-сайте. Но я скачал Crystal Disk и получил следующее. Похоже, что большинство необработанных значений равно 0, включая «Перераспределенное количество секторов».

ОБНОВИТЬ:
Я запустил второй не быстрый формат и снова запустил Crystal Disk, получив информацию ниже. Это практически так же, как предыдущий запуск. Затем я снова запустил chkdsk снова запустил Crystal Disk и получил ту же информацию ниже. Я думаю, что приведенные ниже нулевые значения не являются фактическими значениями, а являются лишь следствием того, что Crystal Disk не может получить доступ к реальным значениям SMART. Я безуспешно пытался найти инструмент для Toshiba, но не уверен, что делать на этом этапе.

Я заметил, что перед запуском chkdsk меню свойств показывало диск как полностью свободный, а после запуска — как полностью заполненный. Кроме того, я забыл упомянуть, что каждый раз, когда я запускаю chkdsk , в конце он выдает ошибку о невозможности записи в файл журнала. Он отображает это неоднократно.

Источник

Is chkdsk saying my entire drive is bad?

I recently ran an aggressive shredding program on a Toshiba external spinning drive, then a recovery program on it to check that the shredding worked, and then non-quick reformatted it with NTFS. I then tried to run the (Windows 7) «Error Checking» tool in the drive’s Properties menu. When I ran this, it kept freezing at the very end, so I ran chkdsk /F /R /X /B G: hoping for a better message. After losing the output because I ran out of window buffer, I ran it yet again, and got the following message. The drive is empty except for a text file and some system folders that were created automatically.

This looks to me like it is telling me that all the (almost 1TB) free space on the drive has been marked as bad and added to the «Bad Clusters File». Am I reading this right? Does this mean my drive is completely bad?

UPDATE:
For the life of me I couldn’t find a Toshiba-specific hard drive diagnostics tool on their very frustrating website. But I downloaded Crystal Disk and got the following. It looks like most of the raw values are 0 however, including the «Reallocated Sectors Count».

UPDATE:
I ran a second non-quick format, and ran Crystal Disk again, getting the info below. It is virtually the same as the previous run. I then ran chkdsk again, and ran Crystal Disk again and got the same info below. I am thinking the zero values below are not actual values, but just an effect of Crystal Disk not being able to access the real SMART values. I have tried without success to find a Toshiba-specific tool, but so I’m not sure what to do at this point.

I noticed that before running chkdsk , the properties menu showed the disk as being totally free, and after running it, as totally full. Also, I forgot to mention that every time I’ve run chkdsk , at the end it displays an error about failing to write to I think a log file. It displays it repeatedly.

Источник

Error in writing the output log что это

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Answers

Same here, today: I’m guessing this is a very recent patch. I installed some Windows updates through the control panel, since I had installed from backup. (It turns out Win7’s «copy» program crashes when copying large files on some RAID arrays, but that’s another story: install Teracopy if you use a RAID array.)

A few issues I have had that may have something to do with it, or may not:
1. I don’t know if this is relevant, but chkdsk corrupts my RAID0 array running off a SI 3132 controller. You need to be very careful to hit a key to cancel it when you boot Windows (and do a backup very frequently.) It looks okay for most of the run, but then says «Error in writing the output log» repeatedly. When you reboot and skip the chkdsk, it shows the array as being full, in spite of the files not taking up the space it thinks they do.
2. Backup ceases to fire up at some point, citing an «internal error».
3. For some reason it wants to reinstall a number of C runtimes, both redistributables and the ones for Visual Studio versions 2005, 2008, 2010. When it’s done, you can’t run any 32-bit applications, citing «side-by-side configuration is incorrect» or similar — I think this is the new «dll h3ll» message. I would like to see this error changed to «DLL H3ll» to make it more understandable for non-technical people. I suspect what is happening is that because of issue (1), when it wipes the old redistributable on shutdown chkdsk «fixes» the drive to have no space so that it can’t install the new one when it starts up.

On hard reboot it gives the message «Applying update operation 3 of 1125 _00000000000.cd-ms» (not sure how many 0s there are) and crashes almost straight away. Then it wants to do a chkdsk corruption, which I skip, and then it gives the same message, again crashing almost instantly.

I hope this helps.

Edit (apart from changing to «h3ll» to bypass overly prissy forum software):
I ran the repair disk, which ran the repair almost immediately rather than needing the «choose your system» step. This got it past the «Applying update operation 3 of 1125» crash point and onto the login menu. When I try logging in, it says «Welcome» (so far for about a half hour) but this time the hourglass icon is spinning, so I might leave it a little while longer in case it is doing something. Considering the exception handler in chkdsk that appears to consist of an infinite loop, I am not hopeful too hopeful.

Edit (Resolved):
Rebooted, Windows realized the update was borked and reverted it, shutdown itself. Booting up again, it installed some other update (this one said «update operation 525 of 525» or something like that.) Now it works. I have asked Windows Update to get the list of «Important Updates», and it has added only KB8972260 to the list, which leads me to suspect it is the culprit. I will try installing it to see. Otherwise it is probably a case of the updates needing to be installed sequentially. The only interesting stuff in the syslog is «The Windows Audio Endpoint Builder service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.» messages for about ten or twenty various services.

I tried installing KB8972260 again, and it did pretty much the same thing, except this time it was «Applying update operation 3 of 324 $$.df-ms». Unfortunately the solution I used last time does not appear to be working. This time the system repair disc wants to «», which I presume means to run chkdsk in the background and hence corrupt my array. Except I won’t know when it has reached the «Error in writing the output log» final infinitely loop stage of the corruption process. I fully expect to restore from backup again. This time I will know to disable KB8972260 from the updates. I would point out that outside of embedded systems, updating a user application should *not* destroy an operating system under any circumstances. There is absolutely no reason for it to. I have never updated Firefox, Opera, Safari or Chrome and consequently needed to restore my computer from backup.

. After forcing a reboot it recovered. The internet explorer update has disappeared from the Important Windows Updates list.

TL;DR:
Symptoms: Windows 7 tries to install some updates on shutdown, with the message «Preparing to configure WindowsnDo not turn off your computer.» but the hourglass has stopped animating. On forced reboot, you get the message «Applying update operation 3 of 1125 _00000000000.cd-ms» with an unknown number of «0»s, system crashes, and process repeats on every boot. Probably with a forced chkdsk.

Resolution:
Run the system repair disc you hopefully made. Let it do its repair. Reboot. Login, and wait for it to say «Welcome» for a disturbingly long time. Then force a reboot. Wait for it to revert, reboot itself, and possibly reboot again. Then it will be back as it was. Disabling automatic updates is probably A Good Idea until you have figured out which update is trashing your system.

Источник

Adblock
detector

Недавно я запустил агрессивную программу измельчения на внешнем вращающемся диске Toshiba, затем программу восстановления, чтобы проверить, работает ли измельчение, и затем быстро отформатировал его с помощью NTFS. Затем я попытался запустить (Windows 7) инструмент «Проверка ошибок» в меню «Свойства» диска. Когда я запустил это, оно продолжало зависать в самом конце, поэтому я запустил chkdsk /F /R /X /B G: надежде на лучшее сообщение. После потери вывода из-за того, что у меня закончился буфер окна, я запустил его снова и получил следующее сообщение. Диск пуст, за исключением текстового файла и некоторых системных папок, которые были созданы автоматически.

...
99 percent complete. (244122093 of 244135076 free clusters processed)    
99 percent complete. (244127093 of 244135076 free clusters processed)    
99 percent complete. (244131093 of 244135076 free clusters processed)    
  244135076 free clusters processed.                                        

Free space verification is complete.
Adding 244135076 bad clusters to the Bad Clusters File.
Windows has made corrections to the file system.

 976657919 KB total disk space.
     21588 KB in 8 files.
        16 KB in 15 indexes.
 976540304 KB in bad sectors.
     96011 KB in use by the system.
     65536 KB occupied by the log file.
         0 KB available on disk.

      4096 bytes in each allocation unit.
 244164479 total allocation units on disk.
         0 allocation units available on disk.
Error in writing the output log.
Error in writing the output log.
Error in writing the output log.
Error in writing the output log.
...

Мне кажется, что это говорит о том, что все (почти 1 ТБ) свободного места на диске было помечено как плохое и добавлено в «Файл плохих кластеров». Я читаю это правильно? Значит ли это, что мой диск абсолютно плох?

ОБНОВИТЬ:
Я не мог найти специальный диагностический инструмент для жестких дисков Toshiba на их очень разочаровывающем веб-сайте. Но я скачал Crystal Disk и получил следующее. Похоже, что большинство необработанных значений равно 0, включая «Перераспределенное количество секторов».

ОБНОВИТЬ:
Я запустил второй не быстрый формат и снова запустил Crystal Disk, получив информацию ниже. Это практически так же, как предыдущий запуск. Затем я снова запустил chkdsk снова запустил Crystal Disk и получил ту же информацию ниже. Я думаю, что приведенные ниже нулевые значения не являются фактическими значениями, а являются лишь следствием того, что Crystal Disk не может получить доступ к реальным значениям SMART. Я безуспешно пытался найти инструмент для Toshiba, но не уверен, что делать на этом этапе.

Я заметил, что перед запуском chkdsk меню свойств показывало диск как полностью свободный, а после запуска — как полностью заполненный. Кроме того, я забыл упомянуть, что каждый раз, когда я запускаю chkdsk , в конце он выдает ошибку о невозможности записи в файл журнала. Он отображает это неоднократно.

Same here, today: I’m guessing this is a very recent patch. I installed some Windows updates through the control panel, since I had installed from backup. (It turns out Win7’s «copy» program crashes when copying large files on some RAID arrays, but that’s another story: install Teracopy if you use a RAID array.)

A few issues I have had that may have something to do with it, or may not:
1. I don’t know if this is relevant, but chkdsk corrupts my RAID0 array running off a SI 3132 controller. You need to be very careful to hit a key to cancel it when you boot Windows (and do a backup very frequently.) It looks okay for most of the run, but then says «Error in writing the output log» repeatedly. When you reboot and skip the chkdsk, it shows the array as being full, in spite of the files not taking up the space it thinks they do.
2. Backup ceases to fire up at some point, citing an «internal error».
3. For some reason it wants to reinstall a number of C runtimes, both redistributables and the ones for Visual Studio versions 2005, 2008, 2010. When it’s done, you can’t run any 32-bit applications, citing «side-by-side configuration is incorrect» or similar — I think this is the new «dll h3ll» message. I would like to see this error changed to «DLL H3ll» to make it more understandable for non-technical people. I suspect what is happening is that because of issue (1), when it wipes the old redistributable on shutdown chkdsk «fixes» the drive to have no space so that it can’t install the new one when it starts up.

On hard reboot it gives the message «Applying update operation 3 of 1125 _00000000000.cd-ms» (not sure how many 0s there are) and crashes almost straight away. Then it wants to do a chkdsk corruption, which I skip, and then it gives the same message, again crashing almost instantly.

I hope this helps.

Edit (apart from changing to «h3ll» to bypass overly prissy forum software):
I ran the repair disk, which ran the repair almost immediately rather than needing the «choose your system» step. This got it past the «Applying update operation 3 of 1125» crash point and onto the login menu. When I try logging in, it says «Welcome» (so far for about a half hour) but this time the hourglass icon is spinning, so I might leave it a little while longer in case it is doing something. Considering the exception handler in chkdsk that appears to consist of an infinite loop, I am not hopeful too hopeful.

Edit (Resolved):
Rebooted, Windows realized the update was borked and reverted it, shutdown itself. Booting up again, it installed some other update (this one said «update operation 525 of 525» or something like that.) Now it works. I have asked Windows Update to get the list of «Important Updates», and it has added only KB8972260 to the list, which leads me to suspect it is the culprit. I will try installing it to see. Otherwise it is probably a case of the updates needing to be installed sequentially. The only interesting stuff in the syslog is «The Windows Audio Endpoint Builder service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.» messages for about ten or twenty various services.

I tried installing KB8972260 again, and it did pretty much the same thing, except this time it was «Applying update operation 3 of 324 $$.df-ms». Unfortunately the solution I used last time does not appear to be working. This time the system repair disc wants to «», which I presume means to run chkdsk in the background and hence corrupt my array. Except I won’t know when it has reached the «Error in writing the output log» final infinitely loop stage of the corruption process. I fully expect to restore from backup again. This time I will know to disable KB8972260 from the updates. I would point out that outside of embedded systems, updating a user application should *not* destroy an operating system under any circumstances. There is absolutely no reason for it to. I have never updated Firefox, Opera, Safari or Chrome and consequently needed to restore my computer from backup.

…After forcing a reboot it recovered. The internet explorer update has disappeared from the Important Windows Updates list.

TL;DR:
Symptoms: Windows 7 tries to install some updates on shutdown, with the message «Preparing to configure WindowsnDo not turn off your computer.» but the hourglass has stopped animating. On forced reboot, you get the message «Applying update operation 3 of 1125 _00000000000.cd-ms» with an unknown number of «0»s, system crashes, and process repeats on every boot. Probably with a forced chkdsk.

Resolution:
Run the system repair disc you hopefully made. Let it do its repair. Reboot. Login, and wait for it to say «Welcome» for a disturbingly long time. Then force a reboot. Wait for it to revert, reboot itself, and possibly reboot again. Then it will be back as it was. Disabling automatic updates is probably A Good Idea until you have figured out which update is trashing your system.

Просмотр полной версии : проблема с установкой Windows

vBulletin® v3.8.5, Copyright ©2000-2023, Jelsoft Enterprises Ltd.

В AVZ меню Файл-Выполнить скрипт. Скопируй код и нажми «Запустить».

beginSetAVZGuardStatus(True);SearchRootkit(true, true);SetServiceStart('Secdrv', 4);SetServiceStart('riode32', 4);SetServiceStart('fwdrv.sys', 4);DeleteService('Secdrv');DeleteService('fwdrv.sys');DeleteService('riode32');QuarantineFile('C:WINDOWSSystem32DRIVERSsecdrv.sys','');QuarantineFile('C:WINDOWSsystem32driversriode32.sys','');QuarantineFile('C:fwdrv.sys','');DeleteFile('C:fwdrv.sys');DeleteFile('C:WINDOWSsystem32driversriode32.sys');DeleteFile('C:WINDOWSSystem32DRIVERSsecdrv.sys');BC_ImportAll;ExecuteSysClean;ExecuteRepair(6);ExecuteRepair(12);BC_Activate;RebootWindows(true);end.

Компьютер перезагрузится.

После перезагрузки выполни еще скрипт

beginCreateQurantineArchive(GetAVZDirectory+'quarantine.zip');end.

Получившийся карантин вышли мне в Приват.

В AVZ меню Файл-Мастер поиска и устранения проблем. Исправь найденные проблемы.

Логи повторить, потому что этот вирус трудно удалить и возможно потребуется лечение в Safe Mode.

Насчет торможения системы. Это может являться следствием ваших манипуляций с HDD.

Проверьте правильность подключения дисков (перемычки и т.п.).

«Мой компьютер» правой кнопкой мыши — Управление — Диспетчер устройств — IDE/ATA-ATAPI-устройства — Первичный и Вторичный каналы IDE.

Посмотрите, не перешел ли режим передачи данных в режим PIO.

Если так, то удалите проблемный контроллер и после перезагрузки обычно все встает на свои места (т.е. в режим DMA).

Изменено 17 сентября, 2008 пользователем ser208

I recently ran an aggressive shredding program on a Toshiba external spinning drive, then a recovery program on it to check that the shredding worked, and then non-quick reformatted it with NTFS. I then tried to run the (Windows 7) «Error Checking» tool in the drive’s Properties menu. When I ran this, it kept freezing at the very end, so I ran chkdsk /F /R /X /B G: hoping for a better message. After losing the output because I ran out of window buffer, I ran it yet again, and got the following message. The drive is empty except for a text file and some system folders that were created automatically.

...
99 percent complete. (244122093 of 244135076 free clusters processed)    
99 percent complete. (244127093 of 244135076 free clusters processed)    
99 percent complete. (244131093 of 244135076 free clusters processed)    
  244135076 free clusters processed.                                        

Free space verification is complete.
Adding 244135076 bad clusters to the Bad Clusters File.
Windows has made corrections to the file system.

 976657919 KB total disk space.
     21588 KB in 8 files.
        16 KB in 15 indexes.
 976540304 KB in bad sectors.
     96011 KB in use by the system.
     65536 KB occupied by the log file.
         0 KB available on disk.

      4096 bytes in each allocation unit.
 244164479 total allocation units on disk.
         0 allocation units available on disk.
Error in writing the output log.
Error in writing the output log.
Error in writing the output log.
Error in writing the output log.
...

This looks to me like it is telling me that all the (almost 1TB) free space on the drive has been marked as bad and added to the «Bad Clusters File». Am I reading this right? Does this mean my drive is completely bad?

UPDATE:
For the life of me I couldn’t find a Toshiba-specific hard drive diagnostics tool on their very frustrating website. But I downloaded Crystal Disk and got the following. It looks like most of the raw values are 0 however, including the «Reallocated Sectors Count».

UPDATE:
I ran a second non-quick format, and ran Crystal Disk again, getting the info below. It is virtually the same as the previous run. I then ran chkdsk again, and ran Crystal Disk again and got the same info below. I am thinking the zero values below are not actual values, but just an effect of Crystal Disk not being able to access the real SMART values. I have tried without success to find a Toshiba-specific tool, but so I’m not sure what to do at this point.

I noticed that before running chkdsk, the properties menu showed the disk as being totally free, and after running it, as totally full. Also, I forgot to mention that every time I’ve run chkdsk, at the end it displays an error about failing to write to I think a log file. It displays it repeatedly.