Error invalid path specified

Как исправить ошибку Microsoft Access 2630

Основы «The specified path is invalid»

Как правило, практикующие ПК и сотрудники службы поддержки знают «The specified path is invalid» как форму «ошибки во время выполнения». Разработчики тратят много времени и усилий на написание кода, чтобы убедиться, что Microsoft Access стабилен до продажи продукта. К сожалению, иногда ошибки, такие как ошибка 2630, могут быть пропущены во время этого процесса.

После установки программного обеспечения может появиться сообщение об ошибке «The specified path is invalid.@@@1@@@1.». Сообщение об этой ошибке 2630 позволит разработчикам обновить свое приложение и исправить любые ошибки, которые могут вызвать его. Разработчик сможет исправить свой исходный код и выпустить обновление на рынке. Эта ситуация происходит из-за обновления программного обеспечения Microsoft Access является одним из решений ошибок 2630 ошибок и других проблем.

Что вызывает ошибку времени выполнения 2630?

У вас будет сбой во время выполнения Microsoft Access, если вы столкнетесь с «The specified path is invalid» во время выполнения. Рассмотрим распространенные причины ошибок ошибки 2630 во время выполнения:

Ошибка 2630 Crash — Ошибка 2630 может привести к полному замораживанию программы, что не позволяет вам что-либо делать. Это возникает, когда Microsoft Access не реагирует на ввод должным образом или не знает, какой вывод требуется взамен.

Утечка памяти «The specified path is invalid» — при утечке памяти Microsoft Access это может привести к медленной работе устройства из-за нехватки системных ресурсов. Возможные искры включают сбой освобождения, который произошел в программе, отличной от C ++, когда поврежденный код сборки неправильно выполняет бесконечный цикл.

Ошибка 2630 Logic Error — логическая ошибка Microsoft Access возникает, когда она производит неправильный вывод, несмотря на то, что пользователь предоставляет правильный ввод. Неисправный исходный код Microsoft Corporation может привести к этим проблемам с обработкой ввода.

В большинстве случаев проблемы с файлами The specified path is invalid связаны с отсутствием или повреждением файла связанного Microsoft Access вредоносным ПО или вирусом. Как правило, любую проблему, связанную с файлом Microsoft Corporation, можно решить посредством замены файла на новую копию. В некоторых случаях реестр Windows пытается загрузить файл The specified path is invalid, который больше не существует; в таких ситуациях рекомендуется запустить сканирование реестра, чтобы исправить любые недопустимые ссылки на пути к файлам.

Распространенные проблемы The specified path is invalid

Усложнения Microsoft Access с The specified path is invalid состоят из:

• «Ошибка программного обеспечения The specified path is invalid. «
• «Недопустимый файл The specified path is invalid. «
• «Извините за неудобства — The specified path is invalid имеет проблему. «
• «К сожалению, мы не можем найти The specified path is invalid. «
• «The specified path is invalid не может быть найден. «
• «Проблема при запуске приложения: The specified path is invalid. «
• «Не удается запустить The specified path is invalid. «
• «The specified path is invalid остановлен. «
• «Неверный путь к приложению: The specified path is invalid.»

Проблемы The specified path is invalid с участием Microsoft Accesss возникают во время установки, при запуске или завершении работы программного обеспечения, связанного с The specified path is invalid, или во время процесса установки Windows. Выделение при возникновении ошибок The specified path is invalid имеет первостепенное значение для поиска причины проблем Microsoft Access и сообщения о них вMicrosoft Corporation за помощью.

Источник ошибок The specified path is invalid

Проблемы The specified path is invalid вызваны поврежденным или отсутствующим The specified path is invalid, недопустимыми ключами реестра, связанными с Microsoft Access, или вредоносным ПО.

В основном, осложнения The specified path is invalid связаны с:

• Недопустимая (поврежденная) запись реестра The specified path is invalid.
• Вирус или вредоносное ПО, повреждающее The specified path is invalid.
• The specified path is invalid злонамеренно или ошибочно удален другим программным обеспечением (кроме Microsoft Access).
• Другое программное приложение, конфликтующее с The specified path is invalid.
• Microsoft Access (The specified path is invalid) поврежден во время загрузки или установки.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Источник

Error invalid path specified

Общие обсуждения

I’m having the following problem. Our backups are failing with the following error:

In the backup logs, I find:

In the event viewer, I find:

The backup operation that started at ‘?2010?-?05?-?24T21:51:56.331072200Z’ has failed with following error code ‘2155347997’ (The operation ended before completion.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

And on the command line, wbadmin returns:

This is very frustrating. The more I use Windows built-in backup the more fragile it seems to be. The D drive is a local drive and the path is valid. Running check disk finds no problems. The drive is mostly empty. I tried with and without the anti-virus software, same problem. There are no other server errors to indicate a problem with the drive or the path. I ran vssadmin list writers, and none of them returned any errors. Why would the backup return an invalid path error, for a path that is valid? Any help would be greatly appreciated.

Thanks much,
James.

• Изменен тип SriramB[MSFT] Microsoft employee 3 октября 2010 г. 11:28 customer did not respond

Все ответы

Apologies for the delay. Can you pl. collect the inbox backup traces under %windir%LogsWindowsServerBackup*.etl and send them across to:

(pl. remove -nospam phrase to get the mail ID).

Thanks for getting back to me!

I’ll try to mail them to you before the end of the week.

A quick question: if the backup failed to find and copy a single file or directory (for whatever reason), why does it abort the whole process? The file in question was not critical, so having it missing from the backup would only have been a minor inconvenience.

Obviously, you want to log such an event very clearly, but it does not make sense to me for it to kill the whole process. Will this be improved in future versions? I have to admit, I’ve not seen much backup software stop because of such a trivial error, except maybe «copy» from the command prompt.

I think the built-in Window Server 2008 R2 backup software is very promising, and overall, I like it better than the old NT Backup crud. However, f rom my limited use, it still seems rough around the edges; too many glitches and problems, something you don’t want to see from your backup software.

Источник

Error invalid path specified

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

I’m having the following problem. Our backups are failing with the following error:

In the backup logs, I find:

In the event viewer, I find:

The backup operation that started at ‘?2010?-?05?-?24T21:51:56.331072200Z’ has failed with following error code ‘2155347997’ (The operation ended before completion.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

And on the command line, wbadmin returns:

This is very frustrating. The more I use Windows built-in backup the more fragile it seems to be. The D drive is a local drive and the path is valid. Running check disk finds no problems. The drive is mostly empty. I tried with and without the anti-virus software, same problem. There are no other server errors to indicate a problem with the drive or the path. I ran vssadmin list writers, and none of them returned any errors. Why would the backup return an invalid path error, for a path that is valid? Any help would be greatly appreciated.

Thanks much,
James.

• Changed type SriramB[MSFT] Microsoft employee Sunday, October 3, 2010 11:28 AM customer did not respond

Apologies for the delay. Can you pl. collect the inbox backup traces under %windir%LogsWindowsServerBackup*.etl and send them across to:

(pl. remove -nospam phrase to get the mail ID).

Thanks for getting back to me!

I’ll try to mail them to you before the end of the week.

A quick question: if the backup failed to find and copy a single file or directory (for whatever reason), why does it abort the whole process? The file in question was not critical, so having it missing from the backup would only have been a minor inconvenience.

Obviously, you want to log such an event very clearly, but it does not make sense to me for it to kill the whole process. Will this be improved in future versions? I have to admit, I’ve not seen much backup software stop because of such a trivial error, except maybe «copy» from the command prompt.

I think the built-in Window Server 2008 R2 backup software is very promising, and overall, I like it better than the old NT Backup crud. However, f rom my limited use, it still seems rough around the edges; too many glitches and problems, something you don’t want to see from your backup software.

Источник

Error invalid path specified

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Asked by:

General discussion

I’m having the following problem. Our backups are failing with the following error:

In the backup logs, I find:

In the event viewer, I find:

The backup operation that started at ‘?2010?-?05?-?24T21:51:56.331072200Z’ has failed with following error code ‘2155347997’ (The operation ended before completion.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.

And on the command line, wbadmin returns:

This is very frustrating. The more I use Windows built-in backup the more fragile it seems to be. The D drive is a local drive and the path is valid. Running check disk finds no problems. The drive is mostly empty. I tried with and without the anti-virus software, same problem. There are no other server errors to indicate a problem with the drive or the path. I ran vssadmin list writers, and none of them returned any errors. Why would the backup return an invalid path error, for a path that is valid? Any help would be greatly appreciated.

Thanks much,
James.

• Changed type SriramB[MSFT] Microsoft employee Sunday, October 3, 2010 11:28 AM customer did not respond

Apologies for the delay. Can you pl. collect the inbox backup traces under %windir%LogsWindowsServerBackup*.etl and send them across to:

(pl. remove -nospam phrase to get the mail ID).

Thanks for getting back to me!

I’ll try to mail them to you before the end of the week.

A quick question: if the backup failed to find and copy a single file or directory (for whatever reason), why does it abort the whole process? The file in question was not critical, so having it missing from the backup would only have been a minor inconvenience.

Obviously, you want to log such an event very clearly, but it does not make sense to me for it to kill the whole process. Will this be improved in future versions? I have to admit, I’ve not seen much backup software stop because of such a trivial error, except maybe «copy» from the command prompt.

I think the built-in Window Server 2008 R2 backup software is very promising, and overall, I like it better than the old NT Backup crud. However, f rom my limited use, it still seems rough around the edges; too many glitches and problems, something you don’t want to see from your backup software.

Источник

Addendum — git version 2.34.1.windows.1 & others(?)

Regrettably, git config core.protectNTFS false turned out not to be enough; the contents of the colon-carrying filenames are lost (filesize = 0).

Solution

TL;DR

git diff ec28c8ddd5f8c83d11604bcae69afb46d79b1029 > p.patch
patch -R -f -i p.patch
git add *
git commit 

Elaboration

Turns out git config core.protectNTFS false does work, insofar as to not produce fatal errors on git checkout anymore.

However, git now will produce filenames clipped to the colon and with zero content.

E.g. Writing-Bops:-The-Bebop-Schema-Language.md (~9KB) —> Writing-Bops (0 KB)

To fix this, we need to get a copy of the original offending file(s)’ content another way, so we can restore it.

Conditions / Assumptions

• This assumes you cannot or will not use a sparse clone for some reason.
• Ditto on git apply-filter and other techniques to ‘permanently rewrite’ git history, f.e. when you are tracking a third-party git repo.
• You’re running Windows, using NTFS storage, git-for-windows with bash as your shell and have a patch.exe available (patch --version should report something like «GNU patch 2.7.6»)

(In our case, we were messing about with a github wiki clone and ran into this issue of filenames containing colons. Of course, we wanted to fix this in place, without going the extra ‘sparse clone’ or WSL mile.)

Turns out we can get the missing content after we did

git config core.protectNTFS false
git checkout <hash>

by running patch. (BTW: TortoiseGit would hang forever if you tried to diff/compare these commits!)

Use this next command to get a patch file with all the missing changes. If you have multiple files with colons or other trouble, all the missing content will be listed in the patchfile: one patchfile to catch it all!

git diff ec28c8ddd5f8c83d11604bcae69afb46d79b1029 > p.patch
# ^^^^ reference the git hash with the offending original file(s)

Now that you have a patchfile, you can apply it to the current working directory: it must be applied in reverse (-R):

patch -R -f -i p.patch

If you forget -R, patch will ask (answer [y]es); if you do specify -R patch will yak even more, so -f (force) is in order to shut up patch and just do the job.

This should list one or more files being patched as a result, e.g.

$ patch -R -f -i p.patch
patching file Writing-Bops:-The-Bebop-Schema-Language.md

Note the colon in that filename: turns out GNU patch on windows (at least v2.7.6) uses a Unicode homoglyph to simulate a colon in a filename. See also further below.

You now have the original content of the colon-ed files in your working directory and you’re now ready to add these files to the git index and commit them as usual:

Warning: you’ll probably need to cleanup (delete) the empty clipped filenames produced by your earlier git checkout before proceeding!

Note: if you don’t like the homoglyphed filename patch -i assigned to the missing content, you can change it to anything you like before committing the result.

git add *
git commit 

Verifying results

When you did everything right, that last commit should list the colon-ed file as renamed as you did not change the content and git commit should thus have detected the «file rename action» as-is.

Extra: replacing colon with a homoglyph

I found several Unicode homoglyphs that look more or less like a colon, but are considered legal in NTFS filenames.

After a bit of experimentation, I decided on using ꞉ as I wanted to keep the github wiki page I was fiddling with intact as much as possible.

Generally, I would discard the colon entirely, or replace it with one or more hyphens, but in the case of wiki MarkDown pages, that decision can go the other way.

	Номер ошибки:	Ошибка 2630
Название ошибки:	The specified path is invalid
Описание ошибки:	The specified path is invalid.@@@1@@@1.
Разработчик:	Microsoft Corporation
Программное обеспечение:	Microsoft Access
Относится к:	Windows XP, Vista, 7, 8, 10, 11

Основы «The specified path is invalid»

Как правило, практикующие ПК и сотрудники службы поддержки знают «The specified path is invalid» как форму «ошибки во время выполнения». Разработчики тратят много времени и усилий на написание кода, чтобы убедиться, что Microsoft Access стабилен до продажи продукта. К сожалению, иногда ошибки, такие как ошибка 2630, могут быть пропущены во время этого процесса.

После установки программного обеспечения может появиться сообщение об ошибке «The specified path is invalid.@@@1@@@1.». Сообщение об этой ошибке 2630 позволит разработчикам обновить свое приложение и исправить любые ошибки, которые могут вызвать его. Разработчик сможет исправить свой исходный код и выпустить обновление на рынке. Эта ситуация происходит из-за обновления программного обеспечения Microsoft Access является одним из решений ошибок 2630 ошибок и других проблем.

Что вызывает ошибку времени выполнения 2630?

У вас будет сбой во время выполнения Microsoft Access, если вы столкнетесь с «The specified path is invalid» во время выполнения. Рассмотрим распространенные причины ошибок ошибки 2630 во время выполнения:

Ошибка 2630 Crash — Ошибка 2630 может привести к полному замораживанию программы, что не позволяет вам что-либо делать. Это возникает, когда Microsoft Access не реагирует на ввод должным образом или не знает, какой вывод требуется взамен.

Утечка памяти «The specified path is invalid» — при утечке памяти Microsoft Access это может привести к медленной работе устройства из-за нехватки системных ресурсов. Возможные искры включают сбой освобождения, который произошел в программе, отличной от C ++, когда поврежденный код сборки неправильно выполняет бесконечный цикл.

Ошибка 2630 Logic Error — логическая ошибка Microsoft Access возникает, когда она производит неправильный вывод, несмотря на то, что пользователь предоставляет правильный ввод. Неисправный исходный код Microsoft Corporation может привести к этим проблемам с обработкой ввода.

В большинстве случаев проблемы с файлами The specified path is invalid связаны с отсутствием или повреждением файла связанного Microsoft Access вредоносным ПО или вирусом. Как правило, любую проблему, связанную с файлом Microsoft Corporation, можно решить посредством замены файла на новую копию. В некоторых случаях реестр Windows пытается загрузить файл The specified path is invalid, который больше не существует; в таких ситуациях рекомендуется запустить сканирование реестра, чтобы исправить любые недопустимые ссылки на пути к файлам.

Распространенные проблемы The specified path is invalid

Усложнения Microsoft Access с The specified path is invalid состоят из:

• «Ошибка программного обеспечения The specified path is invalid. «
• «Недопустимый файл The specified path is invalid. «
• «Извините за неудобства — The specified path is invalid имеет проблему. «
• «К сожалению, мы не можем найти The specified path is invalid. «
• «The specified path is invalid не может быть найден. «
• «Проблема при запуске приложения: The specified path is invalid. «
• «Не удается запустить The specified path is invalid. «
• «The specified path is invalid остановлен. «
• «Неверный путь к приложению: The specified path is invalid.»

Проблемы The specified path is invalid с участием Microsoft Accesss возникают во время установки, при запуске или завершении работы программного обеспечения, связанного с The specified path is invalid, или во время процесса установки Windows. Выделение при возникновении ошибок The specified path is invalid имеет первостепенное значение для поиска причины проблем Microsoft Access и сообщения о них вMicrosoft Corporation за помощью.

Источник ошибок The specified path is invalid

Проблемы The specified path is invalid вызваны поврежденным или отсутствующим The specified path is invalid, недопустимыми ключами реестра, связанными с Microsoft Access, или вредоносным ПО.

В основном, осложнения The specified path is invalid связаны с:

• Недопустимая (поврежденная) запись реестра The specified path is invalid.
• Вирус или вредоносное ПО, повреждающее The specified path is invalid.
• The specified path is invalid злонамеренно или ошибочно удален другим программным обеспечением (кроме Microsoft Access).
• Другое программное приложение, конфликтующее с The specified path is invalid.
• Microsoft Access (The specified path is invalid) поврежден во время загрузки или установки.

Продукт Solvusoft

Загрузка
WinThruster 2022 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление

Recently I was trying to run the Apache Tomcat server from the command prompt to test my Java web application on localhost, only to find the «The system cannot find the path specified» error in command prompt. I haven’t seen this error before so I was wondering whether tomcat is throwing or something is wrong with my system’s PATH environment variable.  In order to start the tomcat server, I was running the catalina.bat file as tomcat/bin/catalina.bat start and it wasn’t starting the Tomcat at all, instead, it was keep throwing «The system cannot find the path specified.» error as shown below:

C:apache-tomcat-7.0.73bin>catalina.bat start
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.

This actually gives me hint that it’s not the Tomcat but something is really wrong with the PATH environment variable, but what could be wrong? What does this error mean? and most importantly how to solve this error?

Cause of «The system cannot find the path specified.» Error

It seems this error occurs when you have invalid paths in your PATH environment variable e.g. directories which don’t exist anymore. To find out if that’s the case just run following command in your DOS command prompt:

C:apache-tomcat-7.0.73bin>echo %PATH%
C:Windowssystem32;C:Windows;C:WindowsSystem32WindowsPowerShellv1.0;
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.

You can see that after printing some paths, the command prompt is throwing «The system cannot find the path specified.» error again, which means it has nothing to do with Tomcat or Catalina but just with the PATH environment variable. There are some directories in the PATH which system is not able to resolve or find, hence it is throwing «The system cannot find the path specified.» error.

To be honest, the error message makes sense if you read it, but we are so used to panic when we see the error, we don’t try to understand the error message in first place. Now that, we have tried printing the value of PATH environment variable and seeing the message after few valid PATH, it suddenly starts making more sense.

This error is nothing to do with Tomcat, it can come while running any program/application from command prompt or even when a program trying to use the PATH environment variable.

The solution of «The system cannot find the path specified.» Error

Now that you know the cause of this error is invalid directories and path in the PATH environment variable, you can easily solve this problem by finding and removing those invalid path entries which system is not able to found.

Btw, finding invalid path can be a problem too if you have several directories listed in PATH environment variable. In order to check every path is correct, you need to split the whole PATH String by semicolon and check if they are correct by copying and opening a directory in command prompt. This could be troublesome but it is the sure short way to find all invalid path in your PATH environment variable.

Can we do better? is there a way to omit some of the valid paths? Well, if you have paid close attention to the output of echo %PATH% command, you see it printed a couple of directories before throwing the «The system cannot find the path specified.» error, which means they are valid, so we should start the search from the point point you see the error.

For example, in our case, the last valid path in the output above was «C:WindowsSystem32WindowsPowerShellv1.0;», so next path must be invalid. We can confirm that by copying that path and opening from the command prompt by just copy pasting it on run window and hitting enter.

If it opens a directory then it’s a valid path, otherwise, run window will tell it’s an invalid path. The next step is to correct or remove that path and run the echo %PATH% again. At this point, you will see the error when the system will hit the next invalid PATH, just repeat the process i.e. copy the invalid path by copying path after last valid path printed by echo %PATH% command and open that directory by using run command window or file explorer. If it’s valid then it will open a directory otherwise you see the error, something like path doesn’t exist.

Repeat the steps until the error completely goes aways, at this time, all the paths in your PATH environment variable is valid and you are ready to run your program from command prompt again e.g. Java, Tomcat, NetBeans or anything else.

Btw, if you are wondering how to see the value of PATH environment variable in Windows 8 or Windows 10, you can follow these steps to copy the PATH String and edit it to correct or remove invalid entries in PATH environment variables.

1. From your desktop, rick-click «My Computer» and click «Properties»
2. In the System Properties window, click on the Advanced tab.
3. In the Advanced section, click the Environment Variables button.
4. In the Environment Variables window, highlight the Path variable in the Systems Variable section and click the Edit button.

Here you can copy the value of PATH environment variable then you can search for last valid path e.g. «C:WindowsSystem32WindowsPowerShellv1.0;», then next path is your invalid PATH. Verify that by opening the directory using run command window or file explorer, if it’s valid either correct it or remove it and then save and open a new command prompt to try again by running echo %PATH%.

If it throws «The system cannot find the path specified.» error again means you have some more invalid paths in PATH environment variable. Just keep correcting or removing them until your PATH is printed completely by echo %PATH%. At this point, your PATH has only valid entries and you can tomcat or Java from the command line.

In my case, though the root cause was still invalid path in PATH environment variable, the reason of being invalid was quite interesting. My system PATH environment variable has sub-directories with an ampersand (&) character on it e.g. C:Program Files (x86)A & Bbin. When I copy pasted and open the directory from the file explorer or run window it was managed to open the directory but when I put the same path in PATH environment variable it was throwing the «The system cannot find the path specified.» error.

I tried to escape & with backslash it didn’t work then I tried to put single quote around A & B e.g. ‘A & B’, that didn’t work too, finally I removed the directory from PATH because it wasn’t really needed and boom the error «The system cannot find the path specified.» was gone. Now the full path is printed when I type the path or echo %PATH% in command prompt. So, that resolved my problem.

Just remember that every time you make a change on PATH or Path environment variable under System Properties section, you must open a new command prompt window, don’t run the PATH or echo %PATH% on old command prompt window because it will have old value of system properties. The new, updated value of PATH will only be available on new command prompt window.

Important points

1. The root cause of «The system cannot find the path specified.» is an invalid path in PATH environment variable.

2. The name of the PATH environment variable can be Path or path as well.

3. You should use the value of the PATH environment variable from System Properties Window in Advanced Settings, Environment Variables.

4. Watch out for & character in PATH, it’s invalid and cause «The system cannot find the path specified.», remove them from PATH.

5. To find the invalid path, just type the path or echo %PATH% in the command prompt and see where it is failing to display the directory path. That’s your invalid entry. Find out what is wrong and then correct it or remove it from PATH.

That’s all about how to solve «The system cannot find the path specified.» error while running the program from the command prompt. The root cause of this error is invalid directories, sub-directories in the PATH environment variable, just remove them and the error will be solved. When searching for invalid directories, look where the path is failing to display directory name, when you type the path or echo %PATH% in command prompt. Watch out for special characters like & in PATH, even though run window can open such path, it seems they are not valid for the PATH environment variable.

Other Java troubleshooting guides you may like to explore:

Symptoms of Code 2630 — The specified path is invalid

Runtime errors happen without warning. The error message can come up the screen anytime Microsoft Access is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

(For illustrative purposes only)

Causes of The specified path is invalid — Code 2630

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither ErrorVault.com nor it’s writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page — you complete these steps at your own risk.