Error iomanip h no such file or directory - Исправление ошибок и поиск оптимальных решений проблем

Remove From My Forums

Question
Using Visual C++ 2010 Express Edition

I am getting the following error from this line of code:

cout << setw(3) << 10;

error C3861: ‘setw’: identifier not found

The cout works fine without the setw()

all the other iomanip functions are also not found

I have the following includes:

#include <iostream>
#include <fstream>
#include <string>
#include <time.h>
#include <windows.h>
#include <stdlib.h>
using namespace std;

if I add

#include <iomanip.h>

I get

fatal error C1083: Cannot open include file: ‘iomanip.h’: No such file or directory

What can be the problem?

Thanks for any help

Answers

Use this form instead:

#include <fstream>
#include <iomanip>

Note the missing .h

Tom
- Marked as answer by
  
  Tuesday, June 15, 2010 2:05 AM

Источник

hakerok115

0 / 0 / 0

Регистрация: 08.03.2010

Сообщений: 57

18.11.2010, 15:10. Показов 15927. Ответов 20

Метки нет (Все метки)

Само задание: Услуги телефонной сети оплачиваются по следующему правилу: за разговоры до A минут в месяц-C руб. а разговоры сверх установленный нормы оплачиваются из расчётов С руб. за минуту. Написать программу,высчитывающую плату за использование телефона для введенного времени разговоров за месяц.
Вот код программы:

C++

#include<iomanip.h>
#include<conio.h>
main()
{
clrscr();
int s,a,b,c,y;
cout<<"введите месячный лимит"; cin>>a;
cout<<"ВВедите время разговоров за минуту"; cin>>y;
cout<<"введите сверхурочную стоимость за мин"; cin>>c;
cout<<"введите абонентскую плату за месяц"; cin>>b;
if(y>b) s=b+(y-a)*c;
else s=b;
cout>>"стоймость за месяц">>s;
getch();
}

Проблема показывает что не может найти #include<iomanip.h> и так же не может найти #include<conio.h>

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь

В астрале

8048 / 4805 / 655

Регистрация: 24.06.2010

Сообщений: 10,562

18.11.2010, 15:18

hakerok115, Пробуем просто iomanip без h.
+ конио убираем. clrscr убираем. getch() заменяем на system(«pause»);

899 / 793 / 186

Регистрация: 21.02.2009

Сообщений: 1,722

18.11.2010, 15:26

clrscr можно заменить на system(«cls»)

0 / 0 / 0

Регистрация: 08.03.2010

Сообщений: 57

18.11.2010, 16:22

[ТС]

Сообщение от MILAN

clrscr можно заменить на system(«cls»)

Воттано

MILAN

899 / 793 / 186

Регистрация: 21.02.2009

Сообщений: 1,722

18.11.2010, 16:28

C++

#include<iostream.h>
#include<stdio.h>
#include<conio.h>
main()
{
clrscr();
int s,a,b,c,y;
cout<<"введите месячный лимит"; cin>>a;
cout<<"ВВедите время разговоров за минуту"; cin>>y;
cout<<"введите сверхурочную стоимость за мин"; cin>>c;
cout<<"введите абонентскую плату за месяц"; cin>>b;
if(y>b) s=b+(y-a)*c;
else s=b;
cout<<"стоймость за месяц"<<s;
getch();
}

5 / 5 / 0

Регистрация: 02.05.2010

Сообщений: 40

18.11.2010, 16:29

может нужно в «Options->Directories» путь прописать?

0 / 0 / 0

Регистрация: 08.03.2010

Сообщений: 57

18.11.2010, 16:36

[ТС]

Сообщение от SimaLiveEvil

может нужно в «Options->Directories» путь прописать?

Там всё указал правильно! Но выдаёт ошибку уже проверял!

Kastaneda

5225 / 3197 / 362

Регистрация: 12.12.2009

Сообщений: 8,101

Записей в блоге: 2

18.11.2010, 18:23

hakerok115, а ForEveR для кого написал?
Да, и совсем не обязательно очищать экран при запуске программы))

Добавлено через 2 минуты
пишем

C++

1	#include<iostream>

остальные хедеры не нужны. Вместо getch() пишем system(«pause»);

3645 / 1377 / 243

Регистрация: 16.04.2009

Сообщений: 4,526

18.11.2010, 18:47

hakerok115, у тебя проблемы с компилятор, а не с кодом
твой код у меня запустился без проблем (точнее проблем с подключением библиотек нет)
MILAN, а твой код запустился полностью

899 / 793 / 186

Регистрация: 21.02.2009

Сообщений: 1,722

18.11.2010, 18:48

Сообщение от go

полномтью

что ето значит?
Разве код может запустится не полностью?

strag 93

1 / 1 / 2

Регистрация: 14.11.2010

Сообщений: 57

18.11.2010, 18:53

C++

#include<iostream.h>
#include<stdio.h>
#include<conio.h>
int main()
{
clrscr();
int s,a,b,c,y;
cout<<"введите месячный лимит"<<endl;
cin>>a;
cout<<"ВВедите время разговоров за минуту"<<endl;
cin>>y;
cout<<"введите сверхурочную стоимость за мин"<<endl;
 cin>>c;
cout<<"введите абонентскую плату за месяц"<<endl;
 cin>>b;
if(y>b) s=b+(y-a)*c;
else s=b;
cout<<"стоимость за месяц"<<s;
getch();
return 0;
}

Вот и проверь , свой компилятор , или переустанови прогу , у меня всё норм работает

3645 / 1377 / 243

Регистрация: 16.04.2009

Сообщений: 4,526

18.11.2010, 18:54

Сообщение от MILAN

что ето значит?

читай внимательно

481 / 119 / 17

Регистрация: 30.09.2010

Сообщений: 473

18.11.2010, 19:30

Сообщение от MILAN

что ето значит?
Разве код может запустится не полностью?

У ТС там еще ошибки есть, но пока заголовочный файл не найден, до них дело не доходит. Но потом, если с подключением iomanip.h все в порядке, они проявляются.

Добавлено через 2 минуты
hakerok115, скормил твой опус Борману 3.1 — все в порядке (в смысле с открытием заголовочных файлов), так что или разбирайся с директориями, или просто переустанови Бормана из дистрибутива.

Kastaneda

5225 / 3197 / 362

Регистрация: 12.12.2009

Сообщений: 8,101

Записей в блоге: 2

18.11.2010, 19:35

Сообщение от Напильнег

Но потом, если с подключением iomanip.h все в порядке

Если кто-нибудь объяснит зачем в этом коде iomanip.h, тому поставлю много много «спасибов»

Добавлено через 1 минуту

Сообщение от Kastaneda

пишем

C++

1	#include<iostream>

остальные хедеры не нужны.

вы ответы читаете?

3645 / 1377 / 243

Регистрация: 16.04.2009

Сообщений: 4,526

18.11.2010, 20:45

Сообщение от MILAN

Разве код может запустится не полностью?

я имел ввиду, что программа отработала корректно, и не нужно вносить никаких изменений в код
ты не правильно меня понял, а может и хотел так понять

481 / 119 / 17

Регистрация: 30.09.2010

Сообщений: 473

18.11.2010, 22:20

Сообщение от Kastaneda

Если кто-нибудь объяснит зачем в этом коде iomanip.h…

iomanip.h тут [пока] не нужен, но неприятностей его присутствие вызывать не должно.

0 / 0 / 0

Регистрация: 10.03.2020

Сообщений: 4

10.03.2020, 15:29

Сообщение от Kastaneda: Если кто-нибудь объяснит зачем в этом коде iomanip.h, тому поставлю много много «спасибов»

Правильно нужно указывать: #include <iomanip>, т.е. без .h и тогда всё заработает!!!

#include <iomanip> — в этом файле описаны манипуляторы при работе с потоками ввода/вывода.

Don’t worry, be happy

17781 / 10545 / 2036

Регистрация: 27.09.2012

Сообщений: 26,516

Записей в блоге: 1

10.03.2020, 15:32

svetik_svetik, где подпись «Ваш КО»?

P.S. Тема чуть-чуть до своего десятилетия не дотянула.

0 / 0 / 0

Регистрация: 10.03.2020

Сообщений: 4

10.03.2020, 15:33

Правильно нужно указывать: #include <iomanip>, т.е. без .h и тогда всё заработает!!!

#include <iomanip> — в этом файле описаны манипуляторы при работе с потоками ввода/вывода.

Don’t worry, be happy

17781 / 10545 / 2036

Регистрация: 27.09.2012

Сообщений: 26,516

Записей в блоге: 1

10.03.2020, 15:33

Сообщение от svetik_svetik

Правильно нужно указывать: #include <iomanip>, т.е. без .h и тогда всё заработает!

А если компилятор оооочень старый, то как правильно?

Источник

iostream.h is deprecated, in a minute I will provide you with a nice link that talks about standard C++ header notation. Visual C++ is old enough to not be very standard.

iostream.h is present, its just in a subdirectory called «backwards» (didn’t you do a windows search in the dev directory to find it?)

Now, there have only been about 1000 posts dealing with this issue in the last month and a half, but because you asked the question so nicely, I will point out that you made find it useful to make certain…additions to you C++ includes path — go to tolls:compiler:directories:c++ includes and add, in this order:

C:<dev path>include
C:<dev path>includecpp
C:<dev path>includec++
C:<dev path>includec++backward
C:<dev path>includec++bits
C:<dev path>includec++mingw32bits
C:<dev path>includec++ext
C:<dev path>includec++mingw32

where c:<dev path> is where you let dev install, in my case it would be

c:dev-cpp

Now, one last note. It is always useful to include in a question such as this what version (exactly, like 4.9.7.0, not newest) and what version of gcc (the compiler) went with it. (You had a choice when you installed, 2.95 or 3.2).

Note the current release is 4.9.7.6

Wayne

Источник

Forum
Beginners
Compiling error

Compiling error

During the past week i’ve been trying to learn c++. Yesterday I tried using somebodies guide on youtube but when I try to compile and run the script I get the errors :

Iostream : No such file or directory
Iomanip: No such file or directory
error: syntax error before «namespace»
warning: data definition has no type or storage class

In function ‘main’
error: cout undeclared, first use in this function
warning return type of ‘main’ is not ‘int’

my code is

//Programmer: Nazmus
//Program: Temperature Table Display

#include<iostream>
#include<iomanip>

using namespace std;

void main()
{
float celsius, fahrenheit, kelvin;

cout << setw(15) << "Celsius" << setw(18) << "Fahrenheit" << setw(15)<< "Kelvin" <<endl;

for(celsius=0;celsius<=100;celsius=celsius+10){

fahrenheit = (9/5.) * celsius + 32;
kelvin = celsius + 273.;

cout << setw(15) << celsius << setw(18) << fahrenheit << setw(15)<< kelvin << endl;
}

system("pause");

}

Nazmus sent me the code and it works for him, i dont know why it doesnt for me. Can anyone tell me if anything is wrong im using Code::Blocks 10.05. Thanks everyone

Did you install the compiler and the standard library?

Don’t you need a space between include and <iostream> etc

Bazzy, i just downloaded codeblocks how do i install the standard and other libraries

Did you install codeblocks + compiler or only codeblocks? what OS are you on?

I have coeeblocks and compiler since the hello world code works, and im using windows vista 64

If you delete all the code above and compile the hello world, does it work?

Yes if i do the hello world it still works it must be a problem with this code

I mean if you replace the code above with the hello world in the very same file

Topic archived. No new replies allowed.

Источник

Error compliling/running C++ program

Dear/s,

I am trying to run the following C++ program in Ubuntu 8.10,

#include <iostream.h>
#include <iomanip.h>
#include <stdlib.h>
using namespace std;
void c_to_f(void);
void f_to_c(void);

void
main(void)
{
int choice;
char again;
do
{
system(«CLS»);

  cout<<setw(10)<<» «<< «What conversion would you like to make?n»;// menu
  cout<<setw(20)<<» «<< «1. Celsius to Fahrenheinn»;
// make a choice which functions to use.
  cout<<setw(20)<<» «<< «2. Fahrenheit to Celsiusnn»;
  cin>>choice;

   switch(choice)
// go to chosen function
   {
    case 1:
     {
      c_to_f();
      break;
     }
    case 2:
     {
      f_to_c();
      break;
   }
  default:
  {
   cout<<setw(10)<<» «<< «Enter 1 ot 2 «<< endl;
// validate and correct input of function choice.

}

cout<<setw(10)<<» «<< «Do you wish to do another conversion? y for yes, n for no «; // return loop on y for yes.
cin>> again;
}while (again=’Y’||again=’y’;

}

void c_to_f(void)
{

system(«CLS»); //clean screen for function data.
int temp,fahrenheit;

cout<< «nnn «;
cout<<setw(10)<<» «<< «Enter the temperature in whole degress Celsius. a»;
cin>>temp;

fahrenheit=((temp*9)/5)+32;
cout<<endl<<setw(10)<<» «<<temp<<» degrees celsius is » <<fahrenheitannn «;
}

void f_to_c(void)
{
system(«CLS»); // clear screen for function data.
int temp, celsius;

cout<< «nnn «;
cout<<setw(10)<<» «<< «Enter the temperature in whole degrees fahrenheit. a»;
cin>>temp;
celsius=((temp-32)*5)/9;

cout<<endl<<setw(10)<<» «temp<<» degrees fahrenheit is «<<celsius<<» degrees celsius a\nnn»;
}

But when I try to compile/run I get the following errors;

bharat@Bharat-desktop:~/C++Examples$ g++ Temp.cpp -o Temp
Temp.cpp:1:22: error: iostream.h: No such file or directory
Temp.cpp:2:21: error: iomanip.h: No such file or directory
Temp.cpp:64: error: stray ‘’ in program
Temp.cpp:64: error: stray ‘’ in program
Temp.cpp:64: error: stray ‘’ in program
Temp.cpp:64: error: stray ‘’ in program
Temp.cpp:64:79: warning: missing terminating » character
Temp.cpp:64: error: missing terminating » character
Temp.cpp:9: error: ‘::main’ must return ‘int’
Temp.cpp: In function ‘int main()’:
Temp.cpp:17: error: ‘cout’ was not declared in this scope
Temp.cpp:17: error: ‘setw’ was not declared in this scope
Temp.cpp:21: error: ‘cin’ was not declared in this scope
Temp.cpp:38: error: ‘endl’ was not declared in this scope
Temp.cpp:48: error: lvalue required as left operand of assignment
Temp.cpp:48: error: expected `)’ before ‘;’ token
Temp.cpp: In function ‘void c_to_f()’:
Temp.cpp:58: error: ‘cout’ was not declared in this scope
Temp.cpp:59: error: ‘setw’ was not declared in this scope
Temp.cpp:60: error: ‘cin’ was not declared in this scope
Temp.cpp:64: error: ‘endl’ was not declared in this scope
Temp.cpp:64: error: expected `;’ before ‘a’
Temp.cpp: In function ‘void f_to_c()’:
Temp.cpp:72: error: ‘cout’ was not declared in this scope
Temp.cpp:73: error: ‘setw’ was not declared in this scope
Temp.cpp:74: error: ‘cin’ was not declared in this scope
Temp.cpp:77: error: ‘endl’ was not declared in this scope
Temp.cpp:77: error: expected `;’ before ‘temp’
bharat@Bharat-desktop:~/C++Examples$

Please guide how to resolve/compile/run this program,

Thanking you,

Bharat

To post a message you must log in.

Источник

Last Updated: 06/30/2022
[Average Read Time: 4.5 minutes]

The development of C-Free 5.0 Pro by Program Arts prompted the latest creation of iomanip.h. It is also known as a C/C++/Objective-C Header file (file extension H), which is classified as a type of Developer (C/C++/Objective-C Header) file.

Iomanip.h was initially released with MATLAB R2009a on 03/14/2009 for the Windows 10 Operating System.

On 01/04/2010, version 5.0 Pro was released for C-Free 5.0 Pro.

Iomanip.h is packaged with C-Free 5.0 Pro and MATLAB R2009a.

Below, you find comprehensive file information, instructions for simple H file troubleshooting, and list of free iomanip.h downloads for each available file version.

What are iomanip.h Error Messages?

General iomanip.h Runtime Errors

Iomanip.h file errors often occur during the startup phase of C-Free, but can also occur while the program is running.
These types H errors are also known as “runtime errors” because they occur while C-Free is running. Here are some of the most common iomanip.h runtime errors:

iomanip.h could not be found.
iomanip.h error.
iomanip.h failed to load.
Error loading iomanip.h.
Failed to register iomanip.h / Cannot register iomanip.h.
Runtime Error — iomanip.h.
The file iomanip.h is missing or corrupt.

Microsoft Visual C++ Runtime Library

Runtime Error!

Program: C:Program Files (x86)C-Free 5mingwincludec++3.4.5backwardiomanip.h

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.

Most H errors are due to missing or corrupt files. Your iomanip.h file could be missing due to accidental deletion, uninstalled as a shared file of another program (shared with C-Free), or deleted by a malware infection. Furthermore, iomanip.h file corruption could be caused from a power outage when loading C-Free, system crash while loading or saving iomanip.h, bad sectors on your storage media (usually your primary hard drive), or malware infection. Thus, it’s critical to make sure your anti-virus is kept up-to-date and scanning regularly.

How to Fix iomanip.h Errors in 3 Steps (Time to complete: ~5-15 minutes)

If you’re encountering one of the error messages above, follow these troubleshooting steps to resolve your iomanip.h issue. These troubleshooting steps are listed in the recommended order of execution.

Step 1: Restore your PC back to the latest restore point, «snapshot», or backup image before error occurred.

To begin System Restore (Windows XP, Vista, 7, 8, and 10):

Hit the Windows Start button
When you see the search box, type «System Restore» and press «ENTER«.
In the search results, find and click System Restore.
Please enter the administrator password (if applicable / prompted).
Follow the steps in the System Restore Wizard to choose a relevant restore point.
Restore your computer to that backup image.

If the Step 1 fails to resolve the iomanip.h error, please proceed to the Step 2 below.

Step 2: If recently installed C-Free (or related software), uninstall then try reinstalling C-Free software.

You can uninstall C-Free software by following these instructions (Windows XP, Vista, 7, 8, and 10):

Hit the Windows Start button
In the search box, type «Uninstall» and press «ENTER«.
In the search results, find and click «Add or Remove Programs«
Find the entry for C-Free 5.0 Pro and click «Uninstall«
Follow the prompts for uninstallation.

After the software has been fully uninstalled, restart your PC and reinstall C-Free software.

If this Step 2 fails as well, please proceed to the Step 3 below.

C-Free 5.0 Pro

Program Arts

Step 3: Perform a Windows Update.

When the first two steps haven’t solved your issue, it might be a good idea to run Windows Update. Many iomanip.h error messages that are encountered can be contributed to an outdated Windows Operating System. To run Windows Update, please follow these easy steps:

Hit the Windows Start button
In the search box, type «Update» and press «ENTER«.
In the Windows Update dialog box, click «Check for Updates» (or similar button depending on your Windows version)
If updates are available for download, click «Install Updates«.
After the update is completed, restart your PC.

If Windows Update failed to resolve the iomanip.h error message, please proceed to next step. Please note that this final step is recommended for advanced PC users only.

If Those Steps Fail: Download and Replace Your iomanip.h File (Caution: Advanced)

If none of the previous three troubleshooting steps have resolved your issue, you can try a more aggressive approach (Note: Not recommended for amateur PC users) by downloading and replacing your appropriate iomanip.h file version. We maintain a comprehensive database of 100% malware-free iomanip.h files for every applicable version of C-Free. Please follow the steps below to download and properly replace you file:

Locate your Windows operating system version in the list of below «Download iomanip.h Files».
Click the appropriate «Download Now» button and download your Windows file version.
Copy this file to the appropriate C-Free folder location:
Windows 10: C:Program FilesMATLABR2019bpolyspaceverifiercxxincludeinclude-stl
Windows 10: C:Program Files (x86)C-Free 5mingwincludec++3.4.5backward
Restart your computer.

If this final step has failed and you’re still encountering the error, you’re only remaining option is to do a clean installation of Windows 10.

GEEK TIP : We must emphasize that reinstalling Windows will be a very time-consuming and advanced task to resolve iomanip.h problems. To avoid data loss, you must be sure that you have backed-up all of your important documents, pictures, software installers, and other personal data before beginning the process. If you are not currently backing up your data, you need to do so immediately.

Download iomanip.h Files (Malware-Tested 100% Clean)

CAUTION : We strongly advise against downloading and copying iomanip.h to your appropriate Windows system directory. Program Arts typically does not release C-Free H files for download because they are bundled together inside of a software installer. The installer’s task is to ensure that all correct verifications have been made before installing and placing iomanip.h and all other H files for C-Free. An incorrectly installed H file may create system instability and could cause your program or operating system to stop functioning altogether. Proceed with caution.

Other Files Related to iomanip.h

File Name	Description	Software Program (Version)	File Size (bytes)	File Location
CBS.log	Log	C-Free 5.0 Pro	946513	C:WindowsLogsCBS
WmiApRpl.ini	Windows Initialization	C-Free 5.0 Pro	29736	C:WindowsinfWmiApRpl009
diagwrn.xml	Extensible Markup Language	C-Free 5.0 Pro	44683	C:WindowsPantherUnattendGC
api-ms-win-core-rtlsup…	ApiSet Stub DLL	Microsoft® Windows® Operating System (10.0.17134.12)	10600	C:UsersTesterAppDataLocalMicrosoftOneDriv…
api-ms-win-core-debug-…	ApiSet Stub DLL	Microsoft® Windows® Operating System (10.0.17134.12)	11112	C:UsersTesterAppDataLocalMicrosoftOneDriv…

You are downloading trial software. The purchase of a one-year software subscription at the price of $39.95 USD is required to unlock all software features. Subscription auto-renews at the end of the term (Learn more). By clicking the «Start Download» button above and installing «Software», I acknowledge I have read and agree to the Solvusoft End User License Agreement and Privacy Policy.

Источник


///main.h
#include <windows.h>
#include "CALENDAR.h"
#define DLG_MAIN 101
#define BTN_TEST 1001
#define BTN_QUIT 1002
///main.cpp
#include "main.h"
//#include "CALENDAR.h"
DATECLASS dt;
BOOL CALLBACK DialogProc(HWND hwndDlg, UINT uMsg, WPARAM wParam, LPARAM lParam)
{
    switch(uMsg)
    {
        case WM_INITDIALOG:
            return TRUE;
        case WM_CLOSE:
            EndDialog(hwndDlg, 0);
            return TRUE;
        case WM_COMMAND:
            switch(LOWORD(wParam))
            {
                case BTN_QUIT:
                    EndDialog(hwndDlg, 0);
                    return TRUE;
                case BTN_TEST:
                    std::string s = dt.toString();
                    MessageBox(hwndDlg, s.c_str(), "Information", MB_ICONINFORMATION);
                    return TRUE;
            }
    }
    return FALSE;
}
int APIENTRY WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nShowCmd)
{
    SYSTEMTIME st;
    GetLocalTime(&st);
    dt = st;
    return DialogBox(hInstance, MAKEINTRESOURCE(DLG_MAIN), NULL, DialogProc);
}
///CALENDAR.h
#ifndef CALENDAR_H_INCLUDED
#define CALENDAR_H_INCLUDED
#include <string>
#include <sstream>
#include <iomanip>
#include <windows.h>
class DATECLASS
{
public:
    DATECLASS():Day(0),Month(0),Year(0){};
    DATECLASS(const SYSTEMTIME& DATE):
        Day(DATE.wDay),
        Month(DATE.wMonth),
        Year(DATE.wYear)
        {};
    short int NextDay();
    short int NextMonth();
    short int NextYear();
    friend std::ostream& operator<<(std::ostream&,const DATECLASS&);
    std::string toString()const
    {
        std::ostringstream os;
        os << (*this);
        return os.str();
    };
private:
    short int Day;
    short int Month;
    short int Year;
};
#endif // CALENDAR_H_INCLUDED
///CALENDAR.cpp
#include "CALENDAR.h"
short int DATECLASS::NextDay()
{
    return ++Day;
}
short int DATECLASS::NextMonth()
{
    return ++Month;
}
short int DATECLASS::NextYear()
{
    return ++Year;
}
std::ostream& operator<<(std::ostream& os,const DATECLASS& D)
{
    os << std::setw(2) << std::setfill('0') << D.Day << '.';
    os << std::setw(2) << std::setfill('0') << D.Month << '.';
    os << std::setw(4) << std::setfill('0') << D.Year;
    return os;
}
///resource.rc
#include "main.h"
DLG_MAIN DIALOGEX 6, 5, 194, 106
CAPTION "Dialog"
FONT 8, "MS Sans Serif", 0, 0, 1
STYLE 0x10CE0804
BEGIN
  CONTROL "&Test", BTN_TEST, "Button", 0x10010000, 138,  5, 46, 15
  CONTROL "&Quit", BTN_QUIT, "Button", 0x10010000, 138, 29, 46, 15
END

Источник

Can not compile irstlm. Log:

In file included from /usr/include/c++/6.3.1/ext/string_conversions.h:41:0,
from /usr/include/c++/6.3.1/bits/basic_string.h:5417,
from /usr/include/c++/6.3.1/string:52,
from /usr/include/c++/6.3.1/bits/locale_classes.h:40,
from /usr/include/c++/6.3.1/bits/ios_base.h:41,
from /usr/include/c++/6.3.1/iomanip:40,
from dictionary.cpp:25:
/usr/include/c++/6.3.1/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
make[2]: *** [Makefile:741: dictionary.lo] Error 1
make[2]: Leaving directory ‘xxx/kaldi/tools/extras/irstlm/src’
make[1]: *** [Makefile:406: all-recursive] Error 1
make[1]: Leaving directory ‘xxx/SpeechLab/kaldi/tools/extras/irstlm’
make: *** [Makefile:338: all] Error 2
Making install in src
make[1]: Entering directory ‘xxx/SpeechLab/kaldi/tools/extras/irstlm/src’
/bin/sh ../libtool —tag=CXX —mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -DTRACE_LEVEL=1 -DMY_ASSERT_FLAG -DHAVE_CXX0 -std=c++0x -static -isystem/usr/include -W -Wall -ffor-scope -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DMYCODESIZE=3 -g -O2 -MT dictionary.lo -MD -MP -MF .deps/dictionary.Tpo -c -o dictionary.lo dictionary.cpp
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -DTRACE_LEVEL=1 -DMY_ASSERT_FLAG -DHAVE_CXX0 -std=c++0x -isystem/usr/include -W -Wall -ffor-scope -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES -DMYCODESIZE=3 -g -O2 -MT dictionary.lo -MD -MP -MF .deps/dictionary.Tpo -c dictionary.cpp -o dictionary.o
In file included from /usr/include/c++/6.3.1/ext/string_conversions.h:41:0,
from /usr/include/c++/6.3.1/bits/basic_string.h:5417,
from /usr/include/c++/6.3.1/string:52,
from /usr/include/c++/6.3.1/bits/locale_classes.h:40,
from /usr/include/c++/6.3.1/bits/ios_base.h:41,
from /usr/include/c++/6.3.1/iomanip:40,
from dictionary.cpp:25:
/usr/include/c++/6.3.1/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
make[1]: *** [Makefile:741: dictionary.lo] Error 1
make[1]: Leaving directory ‘xxx/SpeechLab/kaldi/tools/extras/irstlm/src’
make: *** [Makefile:406: install-recursive] Error 1

Источник

Question

Answers

Compiling error

Error compliling/running C++ program

What are iomanip.h Error Messages?

General iomanip.h Runtime Errors

How to Fix iomanip.h Errors in 3 Steps (Time to complete: ~5-15 minutes)

Step 1: Restore your PC back to the latest restore point, «snapshot», or backup image before error occurred.

Step 2: If recently installed C-Free (or related software), uninstall then try reinstalling C-Free software.

Step 3: Perform a Windows Update.

If Those Steps Fail: Download and Replace Your iomanip.h File (Caution: Advanced)

Download iomanip.h Files (Malware-Tested 100% Clean)

Other Files Related to iomanip.h