Error msg bcu return value real 10 translated 10

Содержание

SCCM,enable TPM w/HP Bios Configurator:Password is set,no password file provided
Error msg bcu return value real 10 translated 10
Error msg bcu return value real 10 translated 10
MDT Bios update with password
3 answers
Error msg bcu return value real 10 translated 10

SCCM,enable TPM w/HP Bios Configurator:Password is set,no password file provided

Original Bios v1.05
Upgrade Bios v1.08
Bios Configurator v.4.0.15.1
Windows 10 v1607
Laptop: EliteBook 1040 G3

I’m trying to setup SCCM to automate configuring a BIOS password, enabling the TPM and storing the details in AD. I’m worndering if anyone has this setup as I’m running in some issues.

Setup.
1. Created a BiosPassword.bin file from the password configurator — works
2. Created a package in SCCM with the required files
3. Created TS step to set password — BIOSConfigUtility64.exe /npwdfile:BiosPassword.bin — works
4. Created step to Enable TPM — BiosConfigUtility64.exe /SetConfig:EnTPM1040G3.REPSET /cpwdfile:BiosPassword.bin — fails

Failure message:

Failed to run the action: Enable TPM for HP EliteBook 1040 G3. The environment is incorrect. (Error: 0000000A; Source: Windows)

Testing: The TS complains about the password file yet it’s the same bin file used to set the password.
1. Created a joint step to set password and enable TPM but fails with the same error
— BiosConfigUtility64.exe /SetConfig:EnableTPM1040G3.REPSET /nspwdfile:BiosPassword.bin

2. Ran the file directly from a PC — file runs and the password is accepted but cannot change TPM activation policy so prompted for F1 on a manual reboot
TPM Activation Policy,
F1 to Boot
Allow user to reject
*No prompts

3. Upgraded the Bios but I get the same two failures.

4. Placed a restart computer step into the TS after the Enable of TPM but makes no difference as initial file fails to run.

Any thoughts would be appreciated. Don’t know why I getting failed password response since the same bin file is being used. Also don’t want users to be prompted to enable TPM as this removes the zero touch deployment.

Источник

‎09-15-2015 03:02 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

I’m using the HP BIOS Configuration Utility (BCU v. 4.0.13.1) to change BIOS configuration.

So I set up a new BIOS password with the HPQPswd tool.

Everything worked fine. Password is activated.

After that I tried to do some changes relating to the boot order.

But everytime, wether with a config file nor with the command «/setvalue:»», the following error message appears:

So I have to provide the password file, but how? Or is there any other mistake?

Thanks for your response!

‎09-15-2015 05:50 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Well, I think I found the problem:

BiosConfigUtility64.exe /set:»Filename.txt» /cspwdfile:»Filename.bin»

But now i receive a new error message:

So I hope somebody can explain me this message or help me with that.

BCU version is v. 4.0.13.1

Thanks for your response!

‎12-07-2015 08:54 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Error Code 10:
Valid password not provided. BCU was unable to find a valid password on the command line in the following cases:

When attempting to change the password, the correct password was not provided.
When attempting to change the password, the new password did not satisfy password requirements for the platform.
When attempting to change setting values, the correct password was not provided.

You are probably using the wrong password-file. Its probably not the file originally created to set the password.

Find the original file or log into the bios and set the password to blank.

Then use the new password file to set the password. (And dont lose it this time and make sure its backed up)

Now run the command again. At least you can verify you are using the wrong file this way. And if you are, i hope you dont have thousands of computers you need to do this on.

Also if the passwords were originally set with the old tools that used clear text passwords, you might be able to use the old versions of BCU to unlock the BIOS.

Источник

Error msg bcu return value real 10 translated 10

‎08-16-2016 11:13 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

trying to change BIOS language using HP Bios Configuration Utility but get Error code 6 — Access Denied (failed due to BIOS permissions).

BIOS version is THI vA0.08.

I can read (get) successfully but cannot change any setting. tried to change other settings unsuccessfully.

What am I missing? Do I need to set a password first?

‎08-19-2016 08:38 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Welcome to the HP Support Forums! I understand that you wish to change the BIOS language on your system to English from the current Dutch. I am happy to assist you with this.

Was Dutch the language that the BIOS was set to out of the box or was it later changed to Dutch?

If the systems’ original default was English, you could try looking at the motherboard guide for your system. HP and Compaq Desktop PCs — motherboard specifications, Thimphu. At the bottom of the page is an indicator for the Jumpers for the CMOS and BIOS password. If your default language was English you could use the jumper to clear the current CMOS settings, including the language.

Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

‎08-16-2016 11:20 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

I should have mentioned.

language is currently Dutch and I would like to set it to English. I removed the * and placed in front of English. essentially following instructions in the manual so that is not the issue.

thanks in advance for your help

‎08-19-2016 08:38 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Welcome to the HP Support Forums! I understand that you wish to change the BIOS language on your system to English from the current Dutch. I am happy to assist you with this.

Was Dutch the language that the BIOS was set to out of the box or was it later changed to Dutch?

Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

‎08-22-2016 09:37 PM — edited ‎08-25-2016 07:22 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Firstly, thank you very much for your support.

The language was Dutch out of the box. I think the problem is that I can’t set the password.

I’ve tried the following:

I set the password in the BIOS to «dd».

HPQPswd64.exe /s /p»dd» /f»dd.bin»

. but that didn’t work.

‎08-23-2016 07:17 AM — edited ‎08-25-2016 07:25 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Sorry . I should provided the error I get .

I’ve tried an easy password like «dd». I’ve also tried «abcd1234» as password but with same results.

I also cleared CMOS and password using jumpers on motherboard and tried all the above again.

I can access the BIOS at bootup with ESC without using a password.

‎08-26-2016 08:10 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Flashing BIOS may reset the language to English, The link below will explain how to Update/Flash BIOS:

You can download the latest BIOS update for your desktop PC from the link below:

Let me know how it goes

I am an HP Employee

‎08-28-2016 09:27 PM — edited ‎08-28-2016 09:31 PM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Thank you for response.

I already did that but the language remained Dutch. BIOS version is latest A0.14 Rev.A.

I think the problem is that I can’t set the password. I am hoping that once I can set the password using BCU I will be able to use BCU to change the language.

I’ve tried the following:

I set the password in the BIOS to «dd».

HPQPswd64.exe /s /p»dd» /f»pwd.bin»

I got the following error:

Besides the easy password «dd» I also tried «abcd1234» as password but with same results.

I also cleared CMOS and password using jumpers on motherboard and tried all the above again.

I can access the BIOS at bootup — it currrently doesn’t have a password.

Is it possible that I am not using a valid passowrd format i.e. must have uppercase and lower case characters as well as numbers etc?

Could it be TPM 2.0 . not sure what this security device is but could that be blocking me from setting a password?

‎08-29-2016 09:59 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Found another way to change the BIOS language. Let’s try that.

Open the installation directory of “BIOS configuration utility”. Path: C:Program Files (x86)Hewlett-PackardSSM
Press Shift key+right mouse button and select “Open command window here”
Type “BIOSConfigutility.exe/getconfig:config.txt” and hit “Enter”, this will create a dump file in the same directory.
Open “config.txt”, scroll down till you find the Language option.
The language with the “*” in front of it is the one that is enabled. In your case, remove the * from before Deutsch and add the * before English and save the file.
Again Press Shift key+right mouse button and select “Open command window here”
Type “BIOSConfigutility.exe/setconfig:config.txt” and hit “Enter”.

Restart the computer, access BIOS and see if the language has been changed.

Let me know how it goes

Senan6806 — HP Support Agent

**Click on the KUDOS Star on the left to say «thanks» for helping!**

**Please Mark a Reply «Accept As Solution» if this has resolved your issue.**

Источник

MDT Bios update with password

I’m trying to make a sequence to update the bios for our HP laptops. I have the needed bios update files etc, but the bios is protected with a password.
Is there a way to use the password in de sequence? Can I add it in a command line or script?
In this topic the anwser is to use command line and HP procedures, but I can’t find those.

Anyone who has experience with this?

3 answers

In your sequence, can you run the hp software that update with a command line ? It would be the way to do it.

See there for a command line; HP BIOS Configuration Utility (BCU); https://ftp.ext.hp.com/pub/caps-softpaq/cmit/HP_BCU.html

HPBiosUpdRec [-s] [-pPasswordFile] [-fROMBINFile] [-a] [-h] [-?]

-s: Silent mode.
-p: Specify encrypted password file created with the HpqPswd utility.
-f: Specify ROM BIN file. Default is BIN file in same folder as exe.
-a: (Silent mode only) Always flash, ignore version comparison.
-h: Create HP_TOOLS partition if not present.
-?: Display usage.
-b: Suspend BitLocker if needed.
-r: Prevent autoreboot after the BIOS update.

And you need to run HPQPswd.exe to create the password file.

HpqPswd.exe /s /p»password123″ /f»password.bin»

I used the software to create a password file but the .bin file is not being used. Can I provide a log file for you?

Источник

Error msg bcu return value real 10 translated 10

‎12-08-2020 02:35 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

I fight wth the following problem.

I bought a used Probook 650G1. When I tried to reinstall Windows, it can not boot from USB. I think it was disabled, but I can not check, because BIOS request PW to enter but I can’t get it from the seller. What I tried before:

1) Disconnect BIOS battery (mian battery and power cord also disconnected)

2) Running HP BCU biosconfigutility.exe /newsetuppassword:»12345″

I got error message:

3)Use HP Bios Reset Utlty. USB drive created, but still not boot from it.

T hanks for your help.

‎12-08-2020 08:04 AM

Mark as New
Bookmark
Subscribe
Permalink
Print
Flag Post

Hi there! Thank you for visiting the HP Support Community!

According to the Community’s Rules of Participation:

4d. No posts shall include instructions or directions intended to bypass or subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc., or to bypass any safety measures.

Therefore, this topic is being locked. If you would like help resetting the password on your product, please Contact HP support in your region.

Источник

Original Bios v1.05
Upgrade Bios v1.08
Bios Configurator v.4.0.15.1
Windows 10 v1607
Laptop: EliteBook 1040 G3

I’m trying to setup SCCM to automate configuring a BIOS password, enabling the TPM and storing the details in AD. I’m worndering if anyone has this setup as I’m running in some issues.

Failure message:
<ERROR msg=»Unable to process command. Password is set, but no password file is provided» />
<ERROR msg=»BCU return value» real=»10″ translated=»10″ />
Failed to run the action: Enable TPM for HP EliteBook 1040 G3. The environment is incorrect. (Error: 0000000A; Source: Windows)

3. Upgraded the Bios but I get the same two failures.

4. Placed a restart computer step into the TS after the Enable of TPM but makes no difference as initial file fails to run.

Источник

Текущее время: 09 фев 2023, 18:40

Сообщения без ответов | Активные темы

Страница 1 из 1 [ Сообщений: 3 ]

Автор

Сообщение

[ТС]

Заголовок сообщения: HP 15-n072sr (Quanta U82) не залочить Manufacture Mode на F.72

Добавлено: 26 окт 2018, 16:29

Модератор

Зарегистрирован: 29 окт 2010, 00:27
Наличности на руках:
4,086.02

Сообщения: 7446
Откуда: Сан-Питер

Приветствую всех!
Прошил Bios версией F.72, а залочить Manufacture Mode не получается.
Пробовал wndmifit из 2.07 и 2.13 (хотя версии BiosConfigUtility.exe и в обоих наборах одинаковые).
Командная строка (из под UEFI W10 x64) в режиме администратора:

Код: Выделить всё

BiosConfigUtility64.exe /SetConfig:lockmpm.txt

Выдаёт ошибку:

Код: Выделить всё

<ERROR msg="Could not change settings. Password is set, but no valid current admin password provded." /> <Warning msg="BCU return value" real="10" translated="10" />

lockmpm.txt:

Код: Выделить всё

English Manufacturing Programming Mode *Lock Unlock

Как заблокировать этот Manufacture Mode?

MSF113

Заголовок сообщения: Re: HP 15-n072sr (Quanta U82) не залочить Manufacture Mode

Добавлено: 26 окт 2018, 16:38

Модератор

Участник АСЦ

Зарегистрирован: 05 фев 2011, 14:51
Наличности на руках:
8,303.26

Сообщения: 15209
Откуда: Екатеринбург

При включении не пишет предупреждение что то вроде:
Manufacture Mode <число>

Это кол-во включений, после которого залочится сам.
Тоже на каком то просто повключал — нужное кол-во раз.

_________________
Ремонт ноутбуков в Екатеринбурге. Даже после «мастеров».
booknot.ru тел (343)237-37-37
A probis probari, ab improbis improbari aequa laus est.

Ciber SLasH
[ТС]

Заголовок сообщения: Re: HP 15-n072sr (Quanta U82) не залочить Manufacture Mode

Добавлено: 26 окт 2018, 17:24

Модератор

Зарегистрирован: 29 окт 2010, 00:27
Наличности на руках:
4,086.02

Сообщения: 7446
Откуда: Сан-Питер

MSF113 писал(а):

При включении не пишет предупреждение что то вроде:
Manufacture Mode <число>

Нет.
Зашил старый Bios — он оказался рабочий. Проблема была не в Bios.

PS: F.70 уже шил и Manufacture Mode лочился. А с новым F.72 — не лочится. Т.ч. F.72 — в помойку.

Показать сообщения за: Поле сортировки

Страница 1 из 1 [ Сообщений: 3 ]

Похожие темы	Автор	Ответы	Просмотры	Последнее сообщение
HP 2000 (2000-2b44dx) Не могу убрать manufacture programming mode is in unlock в форуме HP Compaq	RavD	4	4310	10 июл 2015, 00:45 Evstafiev
HP proone 400 G2 non-touch (6050A2716601.a01) BIOS и manufacture programming mode в форуме HP Compaq	FC1989	9	2692	24 май 2018, 10:49 FC1989
Ищу дамп биоса dell vosto 3681 с manufacture mode . в форуме Поиск BIOS	ttikoo	1	1085	12 ноя 2021, 13:31 Абитуриент
HP 15-n014 (Quanta U82) HP 15-n014 (U82) Нет инициализации в форуме HP Compaq	miros84	14	4152	14 сен 2015, 22:11 morik59
24-g000ur (DAN91CMB6D0 ) Не могу выключить Manufactured Programing Mode in is Unlock Mode в форуме HP Compaq	vmur	6	3029	18 дек 2018, 12:47 vmur

Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Источник

dshumov, самый простой способ для вас — найти того сотрудника и узнать у него пароль.
Либо позвоните в сервис центр и уточните у них, смогут ли они снять пароль.

Джампер сброса биоса на материнке ноута отсутствует.
Снятие CMOS батарейки на некотрое время (по инфе из инета) — не помогает.
Программно этот пароль не сбрасывается.
Бэкдор (инженерный) пароль для данного биоса в инете не найден.

Вот, например, чел перепробовал все, что нашел в инете:

Прошу помощи у тех кто понимает. Аппарат ProBook 4515s, установлен пароль на биос, перепробовал множество методов, начиная от извлечения батарейки CRM на сутки (настройки сбрасывает, пароль остается), заканчивая recovery bios, и командами в SSM, ничего не помогло. При рековери, нажимаю Win+B, caps lock мигает но обрашения к флешке нет. Флешку готовил по этому методу — http://forums.mydigitallife.info/threads/870-Bios-Re…Procedures/page80, также пробовал кинуть файлы в корень флешки. Перепробовал все порты. Пробовал утилиту в составе SSM (biosconfigutility.exe) после команды /NewSetupPassword:»pas» выдает <Warning msg=»BCU return value» real=0 translate=0>. Также перепробовал кучу програм по извлечению, взлому пароля Bios, и все стандартные пароли для разных версий микросхем биоса что нашел в интернете — все до лампочки! Ума не приложу что еще можно сделать?

Источник

Original Bios v1.05
Upgrade Bios v1.08
Bios Configurator v.4.0.15.1
Windows 10 v1607
Laptop: EliteBook 1040 G3

I’m trying to setup SCCM to automate configuring a BIOS password, enabling the TPM and storing the details in AD. I’m worndering if anyone has this setup as I’m running in some issues.

2. Ran the file directly from a PC — file runs and the password is accepted but I cannot change TPM activation policy so prompted for F1 on a manual reboot
TPM Activation Policy,
F1 to Boot
Allow user to reject
*No prompts

3. Upgraded the Bios but I get the same two failures.

4. Placed a restart computer step into the TS after the Enable of TPM but makes no difference as initial file fails to run.

Источник

Hi,

i have this line code:

psexec.exe -c -h \computer C:TempBiosConfigUtility.EXE /c spwd:"" /nspwd:""

Open in new window

this command line check the bios of remote computer and perform a password change with from empty to empty, i use it to verify if computer have password or not.

if the password is not empty, i get this message:

<BIOSCONFIG Version="2.14.0.8" Computername="computer" Date="2013/07/25" Time=
"14:56:39" UTC="2" >
<WARNING msg="Attempt to change the password, but correct password not provided.
" />
<Warning msg="BCU return value" real="10" translated="10" />
</BIOSCONFIG>
BiosConfigUtility.EXE exited on computer with error code 10.

Open in new window

if the password is allready empty, the command line will work and change password and get this message:

<BIOSCONFIG Version="2.14.0.8" Computername="computer" Date="2013/07/25" Time=
"15:06:38" UTC="2" >
<Warning msg="BCU return value" real="0" translated="0" />
</BIOSCONFIG>
BiosConfigUtility.EXE exited on computer with error code 0.

Open in new window

i need the script to get from txt file with 100 computer and check for every one.

and exeport a result in csv file in this form:

computer,result
computer1,Attempt to change the password, but correct password not provided
computer2,BCU return value» real=»0″ translated=»0″
computer3,Attempt to change the password, but correct password not provided
…….

in result, i need to filter the result and display only one of this 2 result:

Attempt to change the password, but correct password not provided

BCU return value» real=»0″ translated=»0″

thanks for help

Источник