Error none mapped

This article describes an issue that occurs when you resolve SIDs on Windows Server 2012 R2 domain controllers. A hotfix is available to resolve this issue. This hotfix has a prerequisite.

Symptoms

This issue occurs when the following conditions are true:

• You migrate the object, such as a groups or a user, to another domain and then migrate them back to the original domain. For more information, see the detailed explanation of the issue.

• You use the PsGetSid tool to look up the security identifier (SID) against a Windows Server 2012 R2 DC.

Additionally, when you view file permissions on a computer that connects to a Windows Server 2012 R2 domain controller, the file permissions show SIDs instead of user or group names.

Note If you use the PsGetSid tool to look up the same SID against a Windows Server 2008 R2 DC, the SID is resolved successfully.

Cause

This issue occurs because Windows Server 2012 R2 DCs cannot resolve the SID from the SID history.

Resolution

To resolve this issue, install the hotfix on Windows Server 2012 R2 DCs.

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem.

If the hotfix is available for download, there is a «Hotfix Download Available» section at the top of this Knowledge Base article. If this section does not appear, submit a request to Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

Prerequisites

To apply this update, you must have update 2919355 installed in Windows Server 2012 R2.

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You may have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows Server 2012 R2 file information and notes

Important Windows 8.1 hotfixes and Windows Server 2012 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under «Windows 8.1/Windows Server 2012 R2» on the page. Always refer to the «Applies To» section in articles to determine the actual operating system that each hotfix applies to.

• The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

  Version	Product	Milestone	Service branch
  6.3.960 0.17 xxx	Windows Server 2012 R2	RTM	GDR

• GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.

• The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the «Additional file information» section. MUM, MANIFEST, and the associated security catalog (.cat) files, are very important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

For all supported x64-based versions of Windows Server 2012 R2

File name	File version	File size	Date	Time	Platform
Lsadb.dll	6.3.9600.17564	198,144	06-Jan-2015	05:23	x64

Additional file information

Additional file information for Windows Server 2012 R2

Additional files for all supported x64-based versions of Windows Server 2012 R2

File property	Value
File name	Amd64_e4945a4e0ffd3c6d2035f11f29d5fcee_31bf3856ad364e35_6.3.9600.17566_none_dfccd51a6738b404.manifest
File version	Not applicable
File size	715
Date (UTC)	08-Jan-2015
Time (UTC)	07:46
Platform	Not applicable
File name	Amd64_microsoft-windows-d..ctoryservices-lsadb_31bf3856ad364e35_6.3.9600.17566_none_8e0c2c42b1f2e3b5.manifest
File version	Not applicable
File size	8,666
Date (UTC)	08-Jan-2015
Time (UTC)	00:31
Platform	Not applicable

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the «Applies to» section.

More Information

Detailed explanation of the issueConsider the following scenario:

• You have Windows 2012 R2 domain controllers in the environment.

• You migrate an object, such as a group or a user that has an «X» object SID, from domain A to domain B. Therefore, the object obtains a new «Y» object SID, and the sIDHistory attribute of the object contains the «X» object SID from domain A.

• You migrate the object back to domain A. In this situation, the object obtains a new «Z» object SID. The sIDHistory attribute of the object contains the «X» object SID from domain A and the «Y» object SID from domain B.

• You have resources that are permitted by the original «X» object SID of the object in domain A.

In this scenario, the «X» object SID of the object is not resolved. Therefore, the file permissions show the SID.

Note Access to the resources that are permitted by the original «X» object SID still works and is not affected. However, you cannot read and determine permissions of the resources because the SIDs are not resolved to object names.

Hi All,

We are developing a Windows service application with VC++, and using «SetEntriesInAcl» API for changing the service properties. But this API is failing on some Windows 7 machines with Error code «ERROR_NONE_MAPPED (1332)». Kindly
help us to solve this case, below are the sample code which we are using:

The system was previously added to a domain and later migrated to workgroup to check this case. Still no luck. 

BOOL SetServicePrivilege(long lChkSum, long lUser, long lProtectService)
{
SECURITY_DESCRIPTOR
sd;
LPTSTR
lpszUser;
EXPLICIT_ACCESS
eaPowUser;
DWORD dwAccessPermissions
= 0,
dwError             = 0,
dwSize              = 0;
PACL pacl                = NULL,
pNewAcl             = NULL;
SC_HANDLE
schManager          = NULL,
schService          = NULL;
PSECURITY_DESCRIPTOR
psd = NULL;
BOOL bDaclPresent        = FALSE,
bDaclDefaulted      = FALSE,
bSuccess            = FALSE,
bRelease
= FALSE;
////////////////////////////////////////////////////
try
{
if(lChkSum != CHECKSUM)
return bSuccess;

psd = (PSECURITY_DESCRIPTOR)&psd;

if(lUser == 1)
{
lpszUser = «Power Users»;

if(lProtectService == 0)
dwAccessPermissions = SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | 
SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG | 
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP | 
SERVICE_USER_DEFINED_CONTROL | READ_CONTROL;
else
dwAccessPermissions = SERVICE_START | READ_CONTROL | DELETE;
}
else if(lUser == 2)
{
lpszUser = «Administrators»;

if(lProtectService == 0)
dwAccessPermissions = SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS | 
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | 
SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | 
SERVICE_STOP | SERVICE_USER_DEFINED_CONTROL | READ_CONTROL | 
WRITE_OWNER | WRITE_DAC | DELETE ;
else
dwAccessPermissions = SERVICE_START | READ_CONTROL | DELETE;
}
else
goto cleanup;

schManager = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);// Obtain a handle to the Service Controller.

if(schManager == NULL)
goto cleanup;

schService = OpenService(schManager, «cwClient», READ_CONTROL | WRITE_DAC);// Obtain a handle to the service.

if(schService == NULL)
goto cleanup;

if(!QueryServiceObjectSecurity(schService, DACL_SECURITY_INFORMATION, psd, 0, &dwSize))// Get the current security descriptor.
{
long lError = GetLastError();
if(lError == ERROR_INSUFFICIENT_BUFFER)
{
psd = (PSECURITY_DESCRIPTOR)HeapAlloc(GetProcessHeap(), HEAP_ZERO_MEMORY, dwSize);
if(psd == NULL)
goto cleanup;
else
bRelease = TRUE;
///////////////////
if(!QueryServiceObjectSecurity(schService, DACL_SECURITY_INFORMATION, psd, dwSize, &dwSize))
goto cleanup;

}
else
goto cleanup;
}

if(!GetSecurityDescriptorDacl(psd, &bDaclPresent, &pacl, &bDaclDefaulted))// Get the DACL.
goto cleanup;

BuildExplicitAccessWithName(&eaPowUser, TEXT(lpszUser), dwAccessPermissions, SET_ACCESS, NO_INHERITANCE);

dwError = SetEntriesInAcl(1, &eaPowUser, pacl, &pNewAcl);// Failed with ERROR_NONE_MAPPED

if(dwError != ERROR_SUCCESS)
goto cleanup;

if(!InitializeSecurityDescriptor(&sd, SECURITY_DESCRIPTOR_REVISION))// Initialize a NEW Security Descriptor.
goto cleanup;

if(!SetSecurityDescriptorDacl(&sd, TRUE, pNewAcl, FALSE))// Set the new DACL in the Security Descriptor.
goto cleanup;

if(!SetServiceObjectSecurity(schService, DACL_SECURITY_INFORMATION, &sd))// Set the new DACL for the service object.
goto cleanup;

bSuccess = TRUE;

cleanup:
if(pNewAcl)
LocalFree((HLOCAL)pNewAcl);
if(bRelease)
{
if(psd)
HeapFree(GetProcessHeap(), 0, (LPVOID)psd);

}
if(schService)
CloseServiceHandle(schService);
if(schManager)
CloseServiceHandle(schManager);
}
catch(…)
{
}
return bSuccess;
}

Thanks,

R-VR

Improve error messages for S3 HeadObject #227

While adding logging context to one of my projects, I noticed that both put_object and head_object only return a generic «Error» when lacking permissions (403). I would expect to see at least the string «forbidden» somewhere in the error message.

Here’s the complete anyhow error chain from CloudWatch:

Returning the error from Lambda currently results in:

The text was updated successfully, but these errors were encountered:

We could potentially generate an error message from the status code if no other message, but this is a bit risky because status codes aren’t always used correctly.

Unfortunately, in this particular case, S3 isn’t actually sending back anything other than a 403 anywhere in the response, so there’s nothing the SDK can do here from the data we have.

It would be great if the SDK could last least return AccessDenied for 403 and other common codes, see https://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html#ErrorCodeList

Looking at the output of aws s3 ls —no-sign-request some-existing-bucket —debug , you can see that the response payload definitely contains «AccessDenied»:

But I guess the string isn’t used by the Rust SDK right now?

Error output of the CLI:

I’m also pretty sure that the Go SDK returns «AccessDenied» too.

The problem seems to be exclusive to HeadObject : Since HeadObject can’t return a body, so there’s no error message in the body for us to parse and it isn’t present in a header either:

When I run put_object, I get a proper error with AccessDenied :

Can you verify you see that as well? If not, I wonder if the anyhow chain is dropping the error.

aws s3 ls is list_bucket I believe. The CLI is smart enough to turn 403 into Forbidden in the head object case and perhaps we should add that same logic as well.

note for maintainers:
Since S3 doesn’t actually model 403/Access denied (https://github.com/awslabs/aws-sdk-rust/blob/main/sdk/s3/src/error_meta.rs#L5-L13) we can’t use the same customization pattern we use for 404 responses.

You’re absolutely right! I just found it in the CLI docs as well:

A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes.

I also confirmed that it’s not a problem with other API calls like PutObject :

The CLI is smart enough to turn 403 into Forbidden in the head object case and perhaps we should add that same logic as well.

Источник

ConnectionTerminated error_code:ErrorCodes.NO_ERROR #45

With httpx using httpcore interface, started receiving the following error:

Don’t know h2 specifics to say, but could NO_ERROR be used for some indication like graceful connection closing rather than raising an error?

The text was updated successfully, but these errors were encountered:

Do you know what the traceback is on this? Really we need to be catching that case in the HTTP/2 connection class and mapping it to a NewConnectionRequired exception. (The server is indicating that it has served the maximum number of streams that it’ll allow on a connection, and that the client should reopen a new connection.)

I had in the past, will try to get a new one.

Looks like we deal with this correctly now, so I’m going to close it off, pending re-occurrence.

Hi @tomchristie , so. it happened again (tagging @yeraydiazdiaz and @florimondmanca also)!

Here is the traceback:

How did you solve this issue, I am facing the same problem.
Thank you

Hey @nathalie21005 ! I don’t have this issue on recent httpcore versions! Also, my assumption is that it was a host problem, not a client one!

hey @victoraugustolls , thank you for replying. Can I know which version are you using for httpcore? thanks

I’m using it through httpx version v0.21.3

I think I have run into the same issue. After issuing many requests on an http2 connection using httpx, all subsequent requests fail immediately with httpx.RemoteProtocolError: .

Package versions:
h2-4.1.0
httpcore-0.14.7
httpx-0.22.0

venvlibsite-packageshttpcore_asynchttp2.py», line 105, in handle_async_request await self._send_request_headers(request=request, stream_id=stream_id) File «

Источник

System Error Codes (1300-1699)

This information is intended for developers debugging system errors. For other errors, such as issues with Windows Update, there is a list of resources on the Error codes page.

The following list describes system error codes for errors 1300 to 1699. They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.

ERROR_NOT_ALL_ASSIGNED

Not all privileges or groups referenced are assigned to the caller.

ERROR_SOME_NOT_MAPPED

Some mapping between account names and security IDs was not done.

ERROR_NO_QUOTAS_FOR_ACCOUNT

No system quota limits are specifically set for this account.

ERROR_LOCAL_USER_SESSION_KEY

No encryption key is available. A well-known encryption key was returned.

ERROR_NULL_LM_PASSWORD

The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.

ERROR_UNKNOWN_REVISION

The revision level is unknown.

ERROR_REVISION_MISMATCH

Indicates two revision levels are incompatible.

ERROR_INVALID_OWNER

This security ID may not be assigned as the owner of this object.

ERROR_INVALID_PRIMARY_GROUP

This security ID may not be assigned as the primary group of an object.

ERROR_NO_IMPERSONATION_TOKEN

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

ERROR_CANT_DISABLE_MANDATORY

The group may not be disabled.

ERROR_NO_LOGON_SERVERS

There are currently no logon servers available to service the logon request.

ERROR_NO_SUCH_LOGON_SESSION

A specified logon session does not exist. It may already have been terminated.

ERROR_NO_SUCH_PRIVILEGE

A specified privilege does not exist.

ERROR_PRIVILEGE_NOT_HELD

A required privilege is not held by the client.

ERROR_INVALID_ACCOUNT_NAME

The name provided is not a properly formed account name.

ERROR_USER_EXISTS

The specified account already exists.

ERROR_NO_SUCH_USER

The specified account does not exist.

ERROR_GROUP_EXISTS

The specified group already exists.

ERROR_NO_SUCH_GROUP

The specified group does not exist.

ERROR_MEMBER_IN_GROUP

Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.

ERROR_MEMBER_NOT_IN_GROUP

The specified user account is not a member of the specified group account.

ERROR_LAST_ADMIN

This operation is disallowed as it could result in an administration account being disabled, deleted or unable to log on.

ERROR_WRONG_PASSWORD

Unable to update the password. The value provided as the current password is incorrect.

ERROR_ILL_FORMED_PASSWORD

Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

ERROR_PASSWORD_RESTRICTION

Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.

ERROR_LOGON_FAILURE

The user name or password is incorrect.

ERROR_ACCOUNT_RESTRICTION

Account restrictions are preventing this user from signing in. For example: blank passwords aren’t allowed, sign-in times are limited, or a policy restriction has been enforced.

ERROR_INVALID_LOGON_HOURS

Your account has time restrictions that keep you from signing in right now.

ERROR_INVALID_WORKSTATION

This user isn’t allowed to sign in to this computer.

ERROR_PASSWORD_EXPIRED

The password for this account has expired.

ERROR_ACCOUNT_DISABLED

This user can’t sign in because this account is currently disabled.

ERROR_NONE_MAPPED

No mapping between account names and security IDs was done.

ERROR_TOO_MANY_LUIDS_REQUESTED

Too many local user identifiers (LUIDs) were requested at one time.

ERROR_LUIDS_EXHAUSTED

No more local user identifiers (LUIDs) are available.

ERROR_INVALID_SUB_AUTHORITY

The subauthority part of a security ID is invalid for this particular use.

ERROR_INVALID_ACL

The access control list (ACL) structure is invalid.

ERROR_INVALID_SID

The security ID structure is invalid.

ERROR_INVALID_SECURITY_DESCR

The security descriptor structure is invalid.

ERROR_BAD_INHERITANCE_ACL

The inherited access control list (ACL) or access control entry (ACE) could not be built.

ERROR_SERVER_DISABLED

The server is currently disabled.

ERROR_SERVER_NOT_DISABLED

The server is currently enabled.

ERROR_INVALID_ID_AUTHORITY

The value provided was an invalid value for an identifier authority.

ERROR_ALLOTTED_SPACE_EXCEEDED

No more memory is available for security information updates.

ERROR_INVALID_GROUP_ATTRIBUTES

The specified attributes are invalid, or incompatible with the attributes for the group as a whole.

ERROR_BAD_IMPERSONATION_LEVEL

Either a required impersonation level was not provided, or the provided impersonation level is invalid.

ERROR_CANT_OPEN_ANONYMOUS

Cannot open an anonymous level security token.

ERROR_BAD_VALIDATION_CLASS

The validation information class requested was invalid.

ERROR_BAD_TOKEN_TYPE

The type of the token is inappropriate for its attempted use.

ERROR_NO_SECURITY_ON_OBJECT

Unable to perform a security operation on an object that has no associated security.

ERROR_CANT_ACCESS_DOMAIN_INFO

Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.

ERROR_INVALID_SERVER_STATE

The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

ERROR_INVALID_DOMAIN_STATE

The domain was in the wrong state to perform the security operation.

ERROR_INVALID_DOMAIN_ROLE

This operation is only allowed for the Primary Domain Controller of the domain.

ERROR_NO_SUCH_DOMAIN

The specified domain either does not exist or could not be contacted.

ERROR_DOMAIN_EXISTS

The specified domain already exists.

ERROR_DOMAIN_LIMIT_EXCEEDED

An attempt was made to exceed the limit on the number of domains per server.

ERROR_INTERNAL_DB_CORRUPTION

Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

ERROR_INTERNAL_ERROR

An internal error occurred.

ERROR_GENERIC_NOT_MAPPED

Generic access types were contained in an access mask which should already be mapped to nongeneric types.

ERROR_BAD_DESCRIPTOR_FORMAT

A security descriptor is not in the right format (absolute or self-relative).

ERROR_NOT_LOGON_PROCESS

The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.

ERROR_LOGON_SESSION_EXISTS

Cannot start a new logon session with an ID that is already in use.

ERROR_NO_SUCH_PACKAGE

A specified authentication package is unknown.

ERROR_BAD_LOGON_SESSION_STATE

The logon session is not in a state that is consistent with the requested operation.

ERROR_LOGON_SESSION_COLLISION

The logon session ID is already in use.

ERROR_INVALID_LOGON_TYPE

A logon request contained an invalid logon type value.

ERROR_CANNOT_IMPERSONATE

Unable to impersonate using a named pipe until data has been read from that pipe.

ERROR_RXACT_INVALID_STATE

The transaction state of a registry subtree is incompatible with the requested operation.

ERROR_RXACT_COMMIT_FAILURE

An internal security database corruption has been encountered.

ERROR_SPECIAL_ACCOUNT

Cannot perform this operation on built-in accounts.

ERROR_SPECIAL_GROUP

Cannot perform this operation on this built-in special group.

ERROR_SPECIAL_USER

Cannot perform this operation on this built-in special user.

ERROR_MEMBERS_PRIMARY_GROUP

The user cannot be removed from a group because the group is currently the user’s primary group.

ERROR_TOKEN_ALREADY_IN_USE

The token is already in use as a primary token.

ERROR_NO_SUCH_ALIAS

The specified local group does not exist.

ERROR_MEMBER_NOT_IN_ALIAS

The specified account name is not a member of the group.

ERROR_MEMBER_IN_ALIAS

The specified account name is already a member of the group.

ERROR_ALIAS_EXISTS

The specified local group already exists.

ERROR_LOGON_NOT_GRANTED

Logon failure: the user has not been granted the requested logon type at this computer.

ERROR_TOO_MANY_SECRETS

The maximum number of secrets that may be stored in a single system has been exceeded.

ERROR_SECRET_TOO_LONG

The length of a secret exceeds the maximum length allowed.

ERROR_INTERNAL_DB_ERROR

The local security authority database contains an internal inconsistency.

ERROR_TOO_MANY_CONTEXT_IDS

During a logon attempt, the user’s security context accumulated too many security IDs.

ERROR_LOGON_TYPE_NOT_GRANTED

Logon failure: the user has not been granted the requested logon type at this computer.

ERROR_NT_CROSS_ENCRYPTION_REQUIRED

A cross-encrypted password is necessary to change a user password.

ERROR_NO_SUCH_MEMBER

A member could not be added to or removed from the local group because the member does not exist.

ERROR_INVALID_MEMBER

A new member could not be added to a local group because the member has the wrong account type.

ERROR_TOO_MANY_SIDS

Too many security IDs have been specified.

ERROR_LM_CROSS_ENCRYPTION_REQUIRED

A cross-encrypted password is necessary to change this user password.

ERROR_NO_INHERITANCE

Indicates an ACL contains no inheritable components.

ERROR_FILE_CORRUPT

The file or directory is corrupted and unreadable.

ERROR_DISK_CORRUPT

The disk structure is corrupted and unreadable.

ERROR_NO_USER_SESSION_KEY

There is no user session key for the specified logon session.

ERROR_LICENSE_QUOTA_EXCEEDED

The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept.

ERROR_WRONG_TARGET_NAME

The target account name is incorrect.

ERROR_MUTUAL_AUTH_FAILED

Mutual Authentication failed. The server’s password is out of date at the domain controller.

ERROR_TIME_SKEW

There is a time and/or date difference between the client and server.

ERROR_CURRENT_DOMAIN_NOT_ALLOWED

This operation cannot be performed on the current domain.

ERROR_INVALID_WINDOW_HANDLE

Invalid window handle.

ERROR_INVALID_MENU_HANDLE

Invalid menu handle.

ERROR_INVALID_CURSOR_HANDLE

Invalid cursor handle.

ERROR_INVALID_ACCEL_HANDLE

Invalid accelerator table handle.

ERROR_INVALID_HOOK_HANDLE

Invalid hook handle.

ERROR_INVALID_DWP_HANDLE

Invalid handle to a multiple-window position structure.

ERROR_TLW_WITH_WSCHILD

Cannot create a top-level child window.

ERROR_CANNOT_FIND_WND_CLASS

Cannot find window class.

ERROR_WINDOW_OF_OTHER_THREAD

Invalid window; it belongs to other thread.

ERROR_HOTKEY_ALREADY_REGISTERED

Hot key is already registered.

ERROR_CLASS_ALREADY_EXISTS

Class already exists.

ERROR_CLASS_DOES_NOT_EXIST

Class does not exist.

ERROR_CLASS_HAS_WINDOWS

Class still has open windows.

ERROR_INVALID_INDEX

ERROR_INVALID_ICON_HANDLE

Invalid icon handle.

ERROR_PRIVATE_DIALOG_INDEX

Using private DIALOG window words.

ERROR_LISTBOX_ID_NOT_FOUND

The list box identifier was not found.

ERROR_NO_WILDCARD_CHARACTERS

No wildcards were found.

ERROR_CLIPBOARD_NOT_OPEN

Thread does not have a clipboard open.

ERROR_HOTKEY_NOT_REGISTERED

Hot key is not registered.

ERROR_WINDOW_NOT_DIALOG

The window is not a valid dialog window.

ERROR_CONTROL_ID_NOT_FOUND

Control ID not found.

ERROR_INVALID_COMBOBOX_MESSAGE

Invalid message for a combo box because it does not have an edit control.

ERROR_WINDOW_NOT_COMBOBOX

The window is not a combo box.

ERROR_INVALID_EDIT_HEIGHT

Height must be less than 256.

ERROR_DC_NOT_FOUND

Invalid device context (DC) handle.

ERROR_INVALID_HOOK_FILTER

Invalid hook procedure type.

ERROR_INVALID_FILTER_PROC

Invalid hook procedure.

ERROR_HOOK_NEEDS_HMOD

Cannot set nonlocal hook without a module handle.

ERROR_GLOBAL_ONLY_HOOK

This hook procedure can only be set globally.

ERROR_JOURNAL_HOOK_SET

The journal hook procedure is already installed.

ERROR_HOOK_NOT_INSTALLED

The hook procedure is not installed.

ERROR_INVALID_LB_MESSAGE

Invalid message for single-selection list box.

ERROR_SETCOUNT_ON_BAD_LB

LB_SETCOUNT sent to non-lazy list box.

ERROR_LB_WITHOUT_TABSTOPS

This list box does not support tab stops.

ERROR_DESTROY_OBJECT_OF_OTHER_THREAD

Cannot destroy object created by another thread.

ERROR_CHILD_WINDOW_MENU

Child windows cannot have menus.

ERROR_NO_SYSTEM_MENU

The window does not have a system menu.

ERROR_INVALID_MSGBOX_STYLE

Invalid message box style.

ERROR_INVALID_SPI_VALUE

Invalid system-wide (SPI_*) parameter.

ERROR_SCREEN_ALREADY_LOCKED

Screen already locked.

ERROR_HWNDS_HAVE_DIFF_PARENT

All handles to windows in a multiple-window position structure must have the same parent.

ERROR_NOT_CHILD_WINDOW

The window is not a child window.

ERROR_INVALID_GW_COMMAND

Invalid GW_* command.

ERROR_INVALID_THREAD_ID

Invalid thread identifier.

ERROR_NON_MDICHILD_WINDOW

Cannot process a message from a window that is not a multiple document interface (MDI) window.

ERROR_POPUP_ALREADY_ACTIVE

Popup menu already active.

ERROR_NO_SCROLLBARS

The window does not have scroll bars.

ERROR_INVALID_SCROLLBAR_RANGE

Scroll bar range cannot be greater than MAXLONG.

ERROR_INVALID_SHOWWIN_COMMAND

Cannot show or remove the window in the way specified.

ERROR_NO_SYSTEM_RESOURCES

Insufficient system resources exist to complete the requested service.

ERROR_NONPAGED_SYSTEM_RESOURCES

Insufficient system resources exist to complete the requested service.

ERROR_PAGED_SYSTEM_RESOURCES

Insufficient system resources exist to complete the requested service.

ERROR_WORKING_SET_QUOTA

Insufficient quota to complete the requested service.

ERROR_PAGEFILE_QUOTA

Insufficient quota to complete the requested service.

ERROR_COMMITMENT_LIMIT

The paging file is too small for this operation to complete.

ERROR_MENU_ITEM_NOT_FOUND

A menu item was not found.

ERROR_INVALID_KEYBOARD_HANDLE

Invalid keyboard layout handle.

ERROR_HOOK_TYPE_NOT_ALLOWED

Hook type not allowed.

ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION

This operation requires an interactive window station.

ERROR_TIMEOUT

This operation returned because the timeout period expired.

ERROR_INVALID_MONITOR_HANDLE

Invalid monitor handle.

ERROR_INCORRECT_SIZE

Incorrect size argument.

ERROR_SYMLINK_CLASS_DISABLED

The symbolic link cannot be followed because its type is disabled.

ERROR_SYMLINK_NOT_SUPPORTED

This application does not support the current operation on symbolic links.

ERROR_XML_PARSE_ERROR

Windows was unable to parse the requested XML data.

ERROR_XMLDSIG_ERROR

An error was encountered while processing an XML digital signature.

ERROR_RESTART_APPLICATION

This application must be restarted.

ERROR_WRONG_COMPARTMENT

The caller made the connection request in the wrong routing compartment.

ERROR_AUTHIP_FAILURE

There was an AuthIP failure when attempting to connect to the remote host.

ERROR_NO_NVRAM_RESOURCES

Insufficient NVRAM resources exist to complete the requested service. A reboot might be required.

ERROR_NOT_GUI_PROCESS

Unable to finish the requested operation because the specified process is not a GUI process.

ERROR_EVENTLOG_FILE_CORRUPT

The event log file is corrupted.

ERROR_EVENTLOG_CANT_START

No event log file could be opened, so the event logging service did not start.

ERROR_LOG_FILE_FULL

The event log file is full.

ERROR_EVENTLOG_FILE_CHANGED

The event log file has changed between read operations.

ERROR_INVALID_TASK_NAME

The specified task name is invalid.

ERROR_INVALID_TASK_INDEX

The specified task index is invalid.

ERROR_THREAD_ALREADY_IN_TASK

The specified thread is already joining a task.

ERROR_INSTALL_SERVICE_FAILURE

The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

ERROR_INSTALL_USEREXIT

User cancelled installation.

ERROR_INSTALL_FAILURE

Fatal error during installation.

ERROR_INSTALL_SUSPEND

Installation suspended, incomplete.

ERROR_UNKNOWN_PRODUCT

This action is only valid for products that are currently installed.

ERROR_UNKNOWN_FEATURE

Feature ID not registered.

ERROR_UNKNOWN_COMPONENT

Component ID not registered.

ERROR_UNKNOWN_PROPERTY

ERROR_INVALID_HANDLE_STATE

Handle is in an invalid state.

ERROR_BAD_CONFIGURATION

The configuration data for this product is corrupt. Contact your support personnel.

ERROR_INDEX_ABSENT

Component qualifier not present.

ERROR_INSTALL_SOURCE_ABSENT

The installation source for this product is not available. Verify that the source exists and that you can access it.

ERROR_INSTALL_PACKAGE_VERSION

This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

ERROR_PRODUCT_UNINSTALLED

Product is uninstalled.

ERROR_BAD_QUERY_SYNTAX

SQL query syntax invalid or unsupported.

ERROR_INVALID_FIELD

Record field does not exist.

ERROR_DEVICE_REMOVED

The device has been removed.

ERROR_INSTALL_ALREADY_RUNNING

Another installation is already in progress. Complete that installation before proceeding with this install.

ERROR_INSTALL_PACKAGE_OPEN_FAILED

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

ERROR_INSTALL_PACKAGE_INVALID

This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.

ERROR_INSTALL_UI_FAILURE

There was an error starting the Windows Installer service user interface. Contact your support personnel.

ERROR_INSTALL_LOG_FAILURE

Error opening installation log file. Verify that the specified log file location exists and that you can write to it.

ERROR_INSTALL_LANGUAGE_UNSUPPORTED

The language of this installation package is not supported by your system.

ERROR_INSTALL_TRANSFORM_FAILURE

Error applying transforms. Verify that the specified transform paths are valid.

ERROR_INSTALL_PACKAGE_REJECTED

This installation is forbidden by system policy. Contact your system administrator.

ERROR_FUNCTION_NOT_CALLED

Function could not be executed.

ERROR_FUNCTION_FAILED

Function failed during execution.

ERROR_INVALID_TABLE

Invalid or unknown table specified.

ERROR_DATATYPE_MISMATCH

Data supplied is of wrong type.

ERROR_UNSUPPORTED_TYPE

Data of this type is not supported.

ERROR_CREATE_FAILED

The Windows Installer service failed to start. Contact your support personnel.

ERROR_INSTALL_TEMP_UNWRITABLE

The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.

ERROR_INSTALL_PLATFORM_UNSUPPORTED

This installation package is not supported by this processor type. Contact your product vendor.

ERROR_INSTALL_NOTUSED

Component not used on this computer.

ERROR_PATCH_PACKAGE_OPEN_FAILED

This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.

ERROR_PATCH_PACKAGE_INVALID

This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.

ERROR_PATCH_PACKAGE_UNSUPPORTED

This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

ERROR_PRODUCT_VERSION

Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.

ERROR_INVALID_COMMAND_LINE

Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.

ERROR_INSTALL_REMOTE_DISALLOWED

Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.

ERROR_SUCCESS_REBOOT_INITIATED

The requested operation completed successfully. The system will be restarted so the changes can take effect.

ERROR_PATCH_TARGET_NOT_FOUND

The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.

ERROR_PATCH_PACKAGE_REJECTED

The update package is not permitted by software restriction policy.

ERROR_INSTALL_TRANSFORM_REJECTED

One or more customizations are not permitted by software restriction policy.

ERROR_INSTALL_REMOTE_PROHIBITED

The Windows Installer does not permit installation from a Remote Desktop Connection.

ERROR_PATCH_REMOVAL_UNSUPPORTED

Uninstallation of the update package is not supported.

ERROR_UNKNOWN_PATCH

The update is not applied to this product.

ERROR_PATCH_NO_SEQUENCE

No valid sequence could be found for the set of updates.

ERROR_PATCH_REMOVAL_DISALLOWED

Update removal was disallowed by policy.

ERROR_INVALID_PATCH_XML

The XML update data is invalid.

ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT

Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update.

ERROR_INSTALL_SERVICE_SAFEBOOT

The Windows Installer service is not accessible in Safe Mode. Please try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state.

ERROR_FAIL_FAST_EXCEPTION

A fail fast exception occurred. Exception handlers will not be invoked and the process will be terminated immediately.

ERROR_INSTALL_REJECTED

The app that you are trying to run is not supported on this version of Windows.

Источник