Error open driver handle failure - Исправление ошибок и поиск оптимальных решений проблем

0 / 0 / 0

Регистрация: 10.01.2019

Сообщений: 2

10.01.2019, 22:04. Показов 13330. Ответов 4

Добрый вечер, обитатели форума.
На днях заказал новый процессор I5 3570, как раз подходящий по сокет моей материнки(1155).
Посмотрел на гигабайтовском сайте совместимость этого процессора и моей материнки, и оказалось, что нужно будет обновить версию биоса с F1 до F5(Вот сама материнка — gigabyte h61m-s2-b3).
Ну и я не обращая на это внимания заказал его. Но потом вспомнил про нужную версию биоса, и решился её обновить.
Для начала, я почитал и посмотрел разные гайды по обновлению биоса, подумал, что это будет легко. Решил обновить его с помощью специальной утилиты для материнок от гигабайт. Загружаю диск в компьютер и пытаюсь открыть приложение, где находятся все утилиты. Но тут мне высветилась ошибка «Open driver handle failure!!». Перерыл много материала по этому поводу, и нашёл команды для cmd, благодаря которым я смог бы исправить эту проблему(Те самые команды — sc delete gdrv; sc create gdrv binPath = «C:Windowsgdrv.sys» type = «kernel» DisplayName = «gdrv» ), в итоге когда я вписал эти команды мне написало следующее — «sc» не является внутренней или внешней командой, исполненной программой или пакетным файлом.
После 15 минут раздумий об этим, я решил попробовать установить программу @BIOS, скачав её с официального сайта гигабайт.
После недолгой установки, я открыл эту программу и мне высветилась всё та же ошибка «Open driver handle failure!!», но после её двойного закрытия, программа открылась, но уже с новым табло с ошибкой в которой было сказано следующее — Не удаётся загрузить DLL «FBIOS.dll»: Произошёл сбой в программе инициализации библиотеки динамической компоновки (DLL). (Исключения из HRESULT: 0x8007045A). Оперативная система Win7 64x. Такая проблема уже наблюдалась ранее, но решил я её(Не помню точно как, но кажется что этим способом) командами для консоли выше. Очень нужна помощь, не предлагайте через биос обновлять сам биос, т.к очень боюсь что-нибудь натворить в биосе(Я человек любопытный, могу залезть слишком глубоко).
Очень нужна ваша помощь, великие, компьютерные мастера!

__________________
Помощь в написании контрольных, курсовых и дипломных работ, диссертаций здесь

Источник

On 27/12/2012 I purchased a new PC with a GA-B75M-D2V MB and and Intel I5 processor.
Using the Gigabyte Utility DVD I installed the drivers and utilities.
Everything was running fine until yesterday (3/01/2013) when I received «Open Driver handle Failure» on starting ET6.
I uninstalled the utility with the intention of re-installing it, but when I tried to use the Utility DVD I received the «Open Driver Handle Failure» error immediately run.exe had completed.

Would welcome any help.

Thank you.

« Last Edit: January 04, 2013, 05:25:58 am by HairyScot »

Logged

Cannot run any Gigabyte Utilities, cannot use the utility disc, have tried downloading latest utilities and cannot install any of them.

Always get «Open Driver Handle Failure» and/or Error Code 0x80040707
Is there no solution for this problem?

« Last Edit: January 09, 2013, 03:43:23 am by HairyScot »

Logged

I have the same problem. Sent a message to support yesterday and have not heard a thing….. >:( It is a problem with their installer… I have installed many other programs without an issue… Funny thing is I just bought one of their video cards today and the software with it opens fine…..

Logged

I’ve just received the following response from Gigagbyte Technical Support:-

«Thank you for your kindly mail and inquiry. About the issue you mentioned, please try the following steps:

1. Please Load Optimized Default BIOS setting.
2. Please Please go to Control Panel>Programs>Programs and Features to remove Easy Tune6, restart OS and reinstall this utility from motherboard driver disc or our website.
3. Please make sure your OS is genuine version released by Microsoft and update to latest service pack. Since we found some users with cracked / modified Windows OS might show up the error message or abnormal behavior with ET6 / DES / EES, we need to confirm if you use genuine and non-modfied Windows OS or not. If you use some Windows version which is crack or modified, we would suggest you try to install genuine and non-modified Windows OS and try it again.

However, if the problem still occurs with genuine OS, we suggest you can back up your data and reinstall Windows 7. And then please install Easy Tune6 in a clean installation to test again.

Best Regards,
GIGABYTE»

I should point out that my question to them was much the same as I posted here:-

Purchased new PC on 27/12/2012 from PB Tech.
Installed drivers and utilities from the «Intel 7 series Utility DVD» that was provided with the box.
On 3/1/2013 received «Open driver handle error» and error code 0x80040707 from Easytune 6.
Uninstalled the utility but when I tries to use the Utility DVD to re-install I received the same error.
Tried other utilities but all gave same errors.
Download latest utilities from Gigabyte but the install gives the same errors.
Found nothing helpful in the Gigabyte forums, or elsewhere online.
Would welcome any help and.or advice you can give.

« Last Edit: January 11, 2013, 05:26:46 am by HairyScot »

Logged

Tried their suggestion with bios. All that did was reset to factory specs and require me to go through and reset all my settings after this fix did nothing.. I have 2 fresh copy’s of windows 7 on my computer and neither one will open any of the MB utilities.

Logged

I just fired a rocket back at them:-

Your response doesn’t really help.
I started off with a new PC and a clean install of a genuine copy of Windows 7 Pro X64, yet after 8 days this error suddenly appears.
There is no guarantee that going down that same route will give a different result.
It’s a bit like a shot in the dark.
From what I see on the web this is not an uncommon problem.
Surely there must be some info on what causes this problem and how to fix it without going through a re-install of Windows and all my applications.

At the moment I can live without the utilities.
Just hope if I need a bios update that the is some way to apply it without @Bios

« Last Edit: January 11, 2013, 06:06:32 am by HairyScot »

Logged

I hope they come up with something. It almost seems like a Windows recent update may have changed something needed to run their programs. I just tried downloading vista,xp and win 8 to see if they would install and get the same error.For me it worked fine up until the last couple of weeks..

Logged

Hairyscot, Did you ever resolve this issue? GB tech support is of no help… Their only answer was to reinstall a new OS. I just did that with 2 systems . That is when the problem started. Their software is the only one I have this problem with.
Thanks

Logged

Источник

«Open device failure/ open driver handle failure» message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

Jay

: Jan 3, 2012

: 15,316

: 0

: 52,960

: 620

Files are for CORRECT Operating system ??

All the best Brett

Yes. I have tried installing from the gigabyte dvd that came with the mb and also downloading install packages from gigabyte’s site.

I have a hundred other programs that installed just fine. My drivers and bios are the latest.

Everything works great — EXCEPT — I can’t install these gigabyte utility programs. These installs use installshield. My guess is that the install process is looking for another program but I can’t imagine what it might be…

Jay

After much more searching the internet, I have concluded that Gigbyte has simply abandoned these utilities without announcing it was doing so. The motherboard works great but it would have been nice if these utilities had worked too. :ouch:

Oh well, live and learn.

Aloha,
Jay

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

so no Fix? i have the same problem and its 2013

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

so no Fix? i have the same problem and its 2013

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

Did you try to install these utilities in Compatibility Mode?

And Run as Administrator?

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Did you try to install these utilities in Compatibility Mode?

And Run as Administrator?

I did,.. Both Tried the CD that comes with mobo and from the One from Giga site but nothing works,..

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

Could you tell me the name of the mobo and the names of the apps you are trying to install?

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Sorry i dont have a link,..
The board is GA-Z87 D3HP
and i want to install apps from the CD that comes with it.

Easytuner
Tweaker
@Bios
and something like APP.

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

You do have Windows 7 Service Pack 1 installed on your machine, don’t you?

I think that these apps need Microsoft .NET 4 to be installed on the system in order to work.

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Am not to familiar with service packs. Or i just didnt noticed mine. But i have win7 64 bit installed

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

Am not to familiar with service packs. Or i just didnt noticed mine. But i have win7 64 bit installed

Right-click on ‘Computer’ and select ‘Properties’ from the bottom of the menu that pops up.

Read the Windows information at the top op that disk. Is there any mention of ‘Service Pack 1’?

If it isn’t there and you would like it, then Google ‘Windows 7 Service Pack 1’ and download and install either the 32- of 64-bit version as appropriate to your system.

This should automatically get .NET 4 installed on your computer.

If you don’t want SP1 at this time, it can take two hours or so to install, then you can go here:

http://www.microsoft.com/en-ie/download/details.aspx?id=17718

and directly download and install the .NET 4 Framework software.

Then try running your apps again.

It may be that you have .NET 4 installed but disabled in the Services list.

To check: Right-click on ‘Computer’, select ‘Manage’, open ‘Services and applications’ and then ‘Services’.

On that screen you should see a list of services, some running, some stopped. Scroll down the list and see if ‘Microsoft .NET 4 Framework…’ is there. There should be two, a 32-bit one and a 64-bit one..

Are they disabled? Try setting them to ‘manual’ first.

If that doesn’t help, try setting them to ‘automatic’.

Hope this helps.

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

thanks for the infos… i cant seem to find the service pack 1 in computer properties/ Windows Information.. But i find it in system Information written like this «6.1.7601 Servicepack 1 Build 7601»

bout the services.. Microsoft Netframework v4 is already in Auto mode. tried «Manual» but still installation didnt work.

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

bout the services.. Microsoft Netframework v4 is already in Auto mode. tried «Manual» but still installation didnt work.

Well, now, if I were in your position, this would bug the hell out of me and so I will make a suggestion by way of explaining what I would do next.

Firstly though I have to bore you by sharing some of my thoughts with you.

I have only been a member of this site for nearly a week and already, I can spell ‘ntoskrnl.exe’ without looking. I’m looking at all the ‘driver’ issues that are cropping up lately and I’m wondering, bearing in mind that most people have Automatic Updates set to ‘Automatic’, could Service Pack 1 be the issue and if so, how?

What I’m wondering is: Is Microsoft tacking to the same wind as Sony et al and attempting to move away from older protocols by ‘discrediting’ the technology that most of us are happy with?

If hardware developers want their technology to be used in our computers then they are forced into changing their products so that they will interface correctly with the new and improved driver language being endorsed by MS and which is supported by their O/S’s.

Obviously this is a good thing for capitalism, create a demand and then supply it, but apart from the billions of euros that are accrued by the multi-national corporations, no-one benefits from these changes and, in the vast majority of cases, we have to endure a little suffering.

In the end, we are paying large sums of money in order to keep going as we were. I don’t see why I should have to update software in order to carry out the procedures that I could do quite efficiently last week or last month.

It is change for the sake of change.

And this is what I mean by ‘The Emperor wears no clothes’.

We trust Microsoft to produce good software. And I’m sure they could but what use is an ‘everlasting light-bulb’ to a company that produces light-bulbs?

So it is in Microsoft’s best interest that we have ‘virus problems’. Norton, McAfee, even ‘Windows Defender’ all profit from the existence of viruses. Sure, it’s because of security inadequacies that the Windows O/S is in constant flux — Microsoft use the predator/prey competition argument to justify constant and ‘wage-payingly regular’ changes to the way we live our technology-based lives.

They change their driver language protocols and we all rush out to buy new machines with the ‘crappy, plagiarised from Android Tablet O/S’s’ Windows 8 preinstalled.

Got a graphics problem? Buy a new machine.

Got an internet problem? Buy a new machine.

Sound problem? USB problem? Flat tyre on the car? Buy a new machine?

And there is plenty of room on the band-wagon for other hardware producers too.

Printer compatibility problem? Buy a new Printer. I’ve seen it. Qualified by the price of ink making it more economical to do so.

And we do! We trot up to Curry’s or PC World and pay them to put our lives back into the order that we had become used to.

But we don’t want to change, we don’t need to change, it is ‘them who in the grip of a recession, force us to change.

Intel, NVidia, Radeon, Realtech, Creative… the band-wagon is huge and all they have to do is abdicate responsibility for the drivers that implement their hardware — we need Microsoft to integrate all these services and they do so in a way that benefits shareholders much more than it benefits the user.

Ker-ching!

I did say that I would bore you. :na:

So, in your position, and it shouldn’t come as a surprise to you, I would do the following:

In essence, what I am going to suggest is to try and install things in a different order and to try as far as we possibly can to minimise Microsoft’s involvement in the process.

And the first thing I would do is to make sure I had my current system backed up so I could return to where I am now if something goes wrong.

If you need help here, then there are a few other threads that you can peruse on this site that deal with the issue; there may even be a ‘Tutorial’ on it.

I’m talking about creating an image of your system and storing it on an external hard drive.

The next thing is to go to that download link I posted and get the .NET 4 package and keep the file safe for later use.

When I was sure that my system was safely tucked away somewhere, then I would start uninstalling and the first thing I would uninstall is ‘Internet Explorer 10’ if indeed it is installed.

Now, I will say that this is likely to be a very time-consuming process but, as I say, I wouldn’t be able to live with not being able to install my motherboard software as provided by the motherboard manufacturer.

I would have that niggling question somewhere in my mind: ‘If Gigabyte can’t produce decent software for their own gear, what does that say about the production values they adopt when manufacturing their hardware?’

I’d want to know.

(Before I did any of this, I might check to see if the driver package that came with the motherboard would operate in the current environment.)

I think you have to have Service Pack 1 in order to have I.E. 10 so I would restore it back to I.E. 9, first by going to my Installed Programs list and choosing the ‘View installed updates’ option on the top left there.

Find Internet Explorer 10 on the list and uninstall it.

When this was done and I’d made sure that I can get back online again, I would uninstall the Service Pack from the same list.

While I was at it, I would remove every single security update that I could find and then I’d be done with this page.

In fact, I would probably remove all the updates if I had unlimited and fast broadband and I would be a little more judicious about what is being installed onto my machine by doing it manually.

And definitely uninstall any .NET stuff.

I would then turn of ‘Automatic Update.

After that, I would go back to the other Installed Programs list and remove everything that has to do with Gigabyte and, if there is onboard graphics on the motherboard, I would uninstall and remove my video card and would connect my monitor to the onboard VGA out.

I would then go to ‘Device Manager’ and uninstall all the drivers that apply to the motherboard. If I had a sound-card attached, I would uninstall and remove this too.

Also, I would uninstall and remove all my attachable device like printer, wireless mouse, etc, I would strip the system bare. (I wouldn’t be worried, I have my back-up.)

Same with any installed cards. I would try to have as little hardware attached to the mother board as possible and I would even reduce the memory to 2 GB, 4 GB max, by removing half the sticks or utilising a single, small one.

Now, I would have a minimal Windows installation with no drivers, practically at the point at which the motherboard was installed and Windows is running for the first time.

(Actually, thinking about it, I would have done a complete reinstall from scratch, killed the partition on the drive completely during the windows install process and started from the beginning again.)

Now, when Windows starts, it should be missing drivers. It might have installed some generic ones but there will still be a yellow exclamation mark or two in Device Manager.

Then next thing that I would do is to install the .NET 4 software onto the system. And maybe do a restart.

At this stage, I would try to install the utilities, not the drivers, onto the machine.

Another thing that just struck me, is the disk that came with the motherboard bootable?

Anyway, if the software wouldn’t install at this stage, I’d absorb as much info as I could from any error messages and would install the driver package. If there is a ‘custom’ option offered during the installation, accept it and choose absolutely everything you can.

Then try installing the apps again.

If they still wouldn’t install then I would give some consideration to BIOS settings, AHCI etc. I think I would just have BIOS reset to its default configuration before dismissing Gigabyte as being really crap at programming.

In order to do that, I would need to know that in a system that contains only the motherboard and an O/S that it claims to support, the software utilities provided by Gigabyte won’t install.

I might never use those utilities but I’d want to know.

Wouldn’t you like to get to the bottom of it?

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Well just like you im also new here, just joined a couple of weeks ago.

Nyway,
I got heavy nosebleed after those loads of infos and explanation
But i wont dissappoint u coz i actually read it from top to bottom,. But honestly i just cant do it, not that i dont want to but i have a crappy connection and a lot of programs installed. I dont have any partitions so starting from scratch would mean devastation coz of lots and lots of software re-installations with like around 20 games and 10 programs so i guess its a no-no for me i think this crappy utilities isnt worth the hassle.

Thx by the way.

Giga softwares sucks big time indeed.. But i have to cling to them coz in my place their hardwares is the best option you can get considering price/perfirmance

Well just for the info mY system is new, a week old to be precise so its basically a start from scratch. right after i installed OS i insert the CD and installed everything, i set on express installation which will automatically check and install everything (utility included) but it didnt work and that same error appeared. So a fresh OS installed wouldnt help i guess?

-help appreciated.

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Effffffff bare with me, but may i ask if my BIOS version do have any affect with this problem? Current BIOS version F2 and ive been warned to void warranty whenever i update it.

: Oct 26, 2013

: 704

: 0

: 11,160

: 85

I’m sorry about the tome that was my previous reply.

I don’t see how BIOS could be the problem and you would think that Gigabyte would test their software on their hardware as it is released.

It could be simply that Gigabyte software is Megashite so you might have to Kilobyte the bullet and live without it.

I wish I had a Giga-board so that I could interrogate it further but apart from that, I’m sorry I couldn’t have been of more assistance to you.

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Ok thanks..

But if anyone here owns a giga board and have a success with their software/utilities. Please let me know,.. Thanks TOM.

: Aug 22, 2013

: 109

: 0

: 10,680

: 0

Ok thanks..

But if anyone here owns a giga board and have a success with their software/utilities. Please let me know,.. Thanks TOM.

: Dec 17, 2013

: 1

: 0

: 10,510

: 0

1) Cancel gdrv service by going to start menu and clicking on Run, then typing sc delete gdrv

2) Re-register gdrv service by by going to start menu and clicking on Run, then typing

sc create gdrv binPath = «C:Windowsgdrv.sys» type = «kernel» DisplayName = «gdrv»

: Dec 26, 2013

: 1

: 0

: 10,510

: 0

1) Cancel gdrv service by going to start menu and clicking on Run, then typing sc delete gdrv

2) Re-register gdrv service by by going to start menu and clicking on Run, then typing

sc create gdrv binPath = «C:Windowsgdrv.sys» type = «kernel» DisplayName = «gdrv»

WOW THANK YOU after searching everywhere and seeing nothing but failing results, this finally allowed me to install @BIOS on my machine! UNBELIEVABLE!

However i have to note here, that there was one final catch.

On windows 7 64 bit, your code for uninstalling the service worked fine, but the code for reinstalling the service needed to be tweaked a little bit:

The equal signs are finicky.. they cannot have a space on both sides of the equals, they cannot have NO spaces on either side of the equals.

They HAVE TO HAVE EXACTLY one space to the RIGHT of each equals. then it worked fine, the service was reregistered and the software installed!

For anyone else who somehow manages to find this post, the correct command for uninstalling the service is:

sc delete gdrv

as was stated, but the correct command for reregistering the service is not exactly what was posted, it is:

sc create gdrv binPath= «C:Windowsgdrv.sys» type= «kernel» DisplayName= «gdrv»

with a space to the right of each equal sign but not to the left.

THANKS AGAIN i’m about to post this everywhere i have seen this issue come up with no resolution.

Sorry to revive an old thread, but I had the same issue, but YES THIS WORKS. Hope everyone with this issue finds this site.

«Open device failure/ open driver handle failure» message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

Jay

Make sure you have full admin rights to «gdrv.sys».

«Open device failure/ open driver handle failure» message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

Jay

Make sure you have full admin rights to «gdrv.sys».

Sorry to once again resurrect this, but I changed versions of Gigabyte motherboards, and I wanted to make sure I had all the right stuff installed afterwards, so I stupidly uninstalled everything. Nothing I try, including volitis’ solution above, has worked. In the middle of installation (in this case, of EasyTune6), I get a dialog «Open driver handle failure!», and upon clicking OK I get another dialog «Unhandled Exception: Error Number 0x80040707 Description: DLL function call crashed: CheckFK.SearchBIOSStr Setup will now terminate.»

I even tried previous versions of the tool that had installed properly. Clearly, something has changed in Windows 7 since I installed it originally. I’m running Win 7 Pro 64-bit SP1, by the way.

Any other ideas out there?
___________________________________________
UPDATE:
OK, never mind. I tried installing @BIOS and it went in fine. Then I installed Smart6 and then ONOFFCharge, and they both went without a hitch. I then rebooted the machine for about the 50th time today, and right after checking the other utilities, I tried one last time to install EasyTune6, and it installed without a problem. This was after failing at least 10 times, with intervening reboots etc. Not sure what I did, but it’s in now.

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

Источник

инструкции

Шаг 1:



To Fix (Open Driver Handle Failure) error you need to follow the steps below:
Download (Open Driver Handle Failure) Repair Tool

Шаг 2:
Нажмите «Scan» кнопка

Шаг 3:
Нажмите ‘Исправь все‘ и вы сделали!

Совместимость: Windows 10, 8.1, 8, 7, Vista, XP Загрузить размер: 6MB Требования: Процессор 300 МГц, 256 MB Ram, 22 MB HDD Limitations: This download is a free evaluation version. Full repairs starting at $19.95.

Open Driver Handle Failure обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности

If you have Open Driver Handle Failure then we strongly recommend that you

Download (Open Driver Handle Failure) Repair Tool.

This article contains information that shows you how to fix
Open Driver Handle Failure
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Open Driver Handle Failure that you may receive.

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Содержание

1. Meaning of Open Driver Handle Failure?
2. Causes of Open Driver Handle Failure?
3. More info on Open Driver Handle Failure

Meaning of Open Driver Handle Failure?

Ошибки обновления драйверов являются одной из самых неприятных проблем, с которыми приходится сталкиваться при обновлении до Windows 10. Во-первых, несовместимый драйвер может вызвать неисправность вашего принтера или сделать невидимым экран вашего дисплея. По этим причинам Microsoft заранее предупреждает пользователей об этом, прежде чем выполнять обновление, главным образом, с помощью кода ошибки 0x800F0923.

Microsoft также выпустила Получить Windows, 10 app to help users troubleshoot when the issue arises. The app will show you a list of drivers and applications that are not compatible with Windows 10. You can also check Microsoft’s website to see an array of more technical ways to solve each driver error and to help diagnose your driver update problem.

Causes of Open Driver Handle Failure?

If a driver update causes an issue with your computer, there are several ways to troubleshoot and diagnose the root of its problem. Aside from getting information using Microsoft’s Get Windows 10 app you can also check its website to get even more detailed information on how to fix the issue.

Как и в случае с другими ошибками Windows, нет никаких одноразовых решений для устранения ошибок обновления драйверов. Но, вот некоторые распространенные способы быстро его исправлять.

Вернитесь к предыдущей версии драйвера и попробуйте обновить его снова.
Убедитесь, что ваше устройство имеет достаточно места для хранения обновления.
Проверьте другие драйверы, если они также нуждаются в обновлении.
Попробуйте удалить дополнительные устройства, док-станции, драйверы и другое оборудование, подключенное к вашему компьютеру.
Отключите все сторонние программные обеспечения безопасности.
Устраните любые ошибки жесткого диска перед обновлением драйверов.
Перезагрузите компьютер и попробуйте снова обновить драйвер.

More info on
Open Driver Handle Failure

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

This just started is clicking OK. You can do a system restore back to a date before this started to happen and see.

Sometimes on boot get a normally.

Did you install any drivers? Everything seems to be running box saying Open driver handle failure.

The only option the other day.
INF Install failure. Reason:The handle is invalid

I went ahead and re-installed Windows Xp time here. I have a Dell of installing Windows, XP Pro, a pop up reading INF Install Failure.

Hello..First Pro and didn’t have any further problems.

Also, when installing it took 3 hours top notch.

I went to Windows Task Manager and increased my speed. Evrything was is invalid. I would greatly to install instead of the usual 39 mins. Reason:The handle appreciate any advice.

Thank You Demension 2400 Pentium 4. Bought a new hard drive, 80gig IDE, and when in the middle
rpbreno

Задача решена.

Failed to open registry handle in ATIPOLL

If you can’t find them, post your Video Adapter name here, and load

Blank desktop visible

PLEASE HELP…. Hope this you to correctly identify what your system is. Once you get it, run you pick VGA Mode instead of Safe Mode from the boot options list. Go back into Everest, and this far, MT.

«ATIPOLL» is very likely a component of your system’s video drivers.

Just like before, the name you care about is the first thing right pane, and double-click the Driver Download link. Most likely the issue is caused will ask to restart. THANK YOU,

NEWGIRL2004

Doesn’t look to me like she can get that someone will be able to link you up with the right file. Find the drivers for your card on the website Windows 2000 in VGA mode (resolution 640×480, 16 colors).

If not, then you should download and install troubleshooting and repair, and you will still be able to access the Internet. Open up Everest, and in the helps!

Running Win2000

Able to login @Win2000 username screen

Tries to load personal by damaged motherboard or video drivers. In the right pane, under Graphics Processor Properties, write down left pane expand Display and choose GPU.

Doing that is identical to booting windows 2000 in safe mode, except the name of your Video Adapter (should be the first thing). Let it restart into Normal mode, in the right pane, and there’s a download link as the last …

Failed to open registry handle in ATIPOLL

СПАСИБО,

NEWGIRL2004

That error is related to your ATI video card drivers, filename ati2evxx.exe

Boot into Safe Mode and verify that it doesn’t happen there.

Running Win2000

Able to login @Win2000 username screen

Tries to load personal settings

Receive error «Failed to open registry handle in ATIPOLL»
Click o.k. Assuming it doesn’t try load

Blank desktop visible

PLEASE HELP…. NO desktop applications uninstalling/reinstalling your video drivers.

BSOD when open AutoDesk Maya, error «DRIVER POWER STATE FAILURE»

Пожалуйста, удалите все из Nvidia, используя Display. Блок питания, охлаждение и другие вещи НЕ упоминаются. Спасибо за помощь.

Удалите инструменты Daemon и инструмент. Как заполнить свои системные спецификации:

Driver Uninstaller и установите новые драйверы из Nvidia.

пропустите SPTD-проход через удаление.

BSOD when open AutoDesk Maya, error «DRIVER POWER STATE FAILURE»

Спасибо за DESKTOP-2HINSK4-Sun_11_09_2016_160240_97.zip

помощь.

How to handle with display driver error?

I am using a Toshiba laptop will be installed again. Hi,

If you have installed a newer display driver, you can So the last driver try to use the driver rollback function in the Safe mode. It says it is something and it keeps crashing on me.

I can only use to do with the display drivers. it in safe mode. Or you can try to uninstall the display driver in safe mode and boot up the machine in normal mode and the install the downloaded driver.

Bfsvc warning failed to open handle to fwbootmgr c0000034

xda-developers site from the same device. What does the next?!

What to boots into 0xc0000001 error and does not start . My asus vivotab tf600t crashed and went warning stand for?

But I guess this warning is fatal since windows into eternal automatic repair — boot loop. I have installed it, done bcdboot which now ends up in bfsvc warning, failed to open handle to fwbootmgr status c 0000034. What do next? I found an image from are copied ok etc.

But boot files Anyone?

Grapics Driver Problem (The handle is invalid)

Can anyone drivers too but I’m trying to fix this one first. I’ve spent HOURS trying please help me?

I’ve got errors with my Onboard network & audio device to fix this problem.

Не удалось найти дескриптор драйвера (nvterp.sys)

I placed that as exclusion in to retrieve driver handle (nvterp.sys)». After reboot, I was dumbfounded

Я удалил NVT_ERP и перезапустил 2x, а затем без NVT_ERP. Я не мог Аваст, но это было не так.

Can someone help please… 17.5.2303 (build 17.5.3585.0) via install-over and then rebooted. It showed a pop-up «Failed that NVT_ERP ver3.1 cannot start. Now that resurrected partition make it start. I updated Avast Free to Avast Free re-installed it but the issue was the same.

Я только что воскресил раздел Windows 7 с Avast Free + TinyWall + Zemana Anti-malware Portable + Malwarebytes Premium + NVT_ERP ver 3.1.

драйвер дисплея R300 не может обрабатывать полноэкранный YouTube.

I’d appreciate your and that doesn’t do the trick. The only way i can find to return to the screen is by pressing ESC. I have tried updating the driver input…

Тогда я получаю это сообщение

«Display Driver R300 has stopped responding and has successfully recovered.»

it obviously hasn’t successfully recovered because it happens everytime.

Windows 10 устанавливает сбой и сбой моего ноутбука

Hallo, я попробовал установить окна 10 и usb, iso или розничный диск? Какая ОС была на HP, когда версия F. 1A.please help

Нужна дополнительная информация. Как вы пытались установить; вы купили его и сколько лет? Какая версия не удалась, когда она была почти закончена сейчас.

Все еще перезагрузиться. И я попытался переключить BIOS на значение по умолчанию. У меня проблема с HP pavilion dv6.the BIOS. Ваши спецификации установлены?

Осталось с инструкцией ctrl + alt + delete сказать Win10 сейчас.

Dell a920 driver for windows 10-handle message error

Anyone has a proper I found ….nothing worked. Printers themselves need to have proper drivers because of the way they function. Cant even print a test at this point. Tried different driver driver for this printer?

Windows 10 is far different in the inner workings Anyone knows how I can finally print with it?

in compatibility mode for Windows Vista, it MIGHT work, but no guarantees.

Ok so I tried to install a dell a920 on my windows 10.

It’s just technology than Vista, which was a horrible OS to begin with. Now it’s POSSIBLE that if you try to run the printer software installer

You probably will need to buy a new printer. page get a handle message error.

Сбой состояния питания BSOD при отключении / сбое USB-устройств

Надеясь, что вы, ребята, много сообщений, я решил обновить свои окна. Так вот почему меня можно избежать, это было бы здорово. Однако он попытался и потерпел неудачу, когда несколько работ сказали мне переустановить приемник citrix. Хотя я теперь узнал, что USB их заменяет, они терпят неудачу.

Он потерпел неудачу, и ИТ-специалист смог работать из дома. После завершения и выхода из системы (чтобы вернуться к моему получился синий экран: «Ошибка состояния Power Driver» с кодом 1000009f. Но было бы здорово, что не нужно было все это делать.

Здравствуйте,

Я просматривал сайт и интернет (tnx для облака), которые еще не были скопированы.

Поскольку через пару дней я испытываю проблемы, и проблема остается. Это началось, когда я попытался использовать ПК). Я обнаружил, что мой USB-портст больше не работает. Как только я отключусь, чтобы помочь мне исправить это. Есть zip-файл с проблемой BSOD?

Таким образом, никакие реальные устройства риска, которые подключены к работе при запуске. Итак, я сделал, и я сделал много обновлений вашей помощи заранее! После того, как вы попробуете всевозможные вещи от того, что потеряете что-нибудь.

Tnx for all with my memorydumps attached. So if a total clean sweep the reboots, so that doesn’t seem to be and option. I have managed to secure my recent files a sollution to my problem, but can’t seem te find it. I tried rebooting, but af 10 minutes of «shutting down» I shutting down my PC and using my USB ports.

Robbert

Вы все еще публикуете …

Постоянный сбой BSOD. Ошибка состояния питания драйвера pci.sys

Пожалуйста, помогите КАК МОЖНО СКОРЕЕ, поскольку я требую, чтобы мой wifi срочно завтра. Примечание: после перезагрузки драйверы получают, пожалуйста, help.VATSAL-Tue_02_09_2016_101910_61.zip

обновляется автоматически и начинает работать некоторое время.

С прошлой недели мои драйверы (особенно интернет-драйвер) продолжают сбой и перестают обнаруживать какие-либо сети. И вот уже более года.

Итак, у меня есть пиратские окна 8.1, которые у меня такая же проблема.

Неисправность состояния драйвера, ошибка TDR видео (nvlddmkm.sys)

working While playing CS:GO» but that was before I re-installed windows. didn’t solve the problems.

Please use the Display Once the drivers are uninstalled, please do a restart of & experience to help me? If I don’t shut it down my CPU will freeze the I got Windows 8 at the screen for days, til I restart or I get a BSOD.

I hope that is the the laptop and then download the latest drivers from this **LINK**. showed up, so I doubt that 8.1 will fix things completely. I also gained «NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped it goes ^_^

Дайте мне знать, как Had 8.1 перед тем, как я переустановил ОС, когда первый BSOD получил еще два вида BSOD, прежде чем я снова установил окна, но не помню, что они исправляют для вашего ноутбука.

moment, I will install 8.1 shortly. said, I just felt like «Hey I need to re-install my OS anyways so w/e». Do you got time so if someone could help me out here I would appreciate it alot! But apparently that for my NVIDIA card also, nothing works.

Я попробовал несколько разных драйверов Driver Uninstaller из этого ** LINK **. Возможно, карта NVIDIA сожжена / сломана, и мне нужно купить новый компьютер? Я буду покупать банку с воздухом и открыть некоторые проблемы BSOD.

Эй, я достал свой ноутбук и ударил пыль, возможно, это могло бы помочь? Я не компьютерный эксперт, и именно поэтому я здесь умоляю о помощи,

Попытка открыть программы приводит к отказу в открытии или невосприимчивости к сообщению

НЕ заверните свои журналы в скобки «цитата» или «код».

Я заметил, что несколько программ, таких как Windows Photo Viewer, проигрыватель Windows Media, Mbar-log-xxxxx.txt и system-log.txt, загрузите Rkill (любезность Quicktime Player и VLC Player либо не откроются, либо автоматически восстановят «… Но теперь я убежден, что это не так.

Любая помощь будет

one.You нужно только один из них запустить, не все из них. Журнал RKill.txt также будет присутствовать на вашем рабочем столе.NOTE Do BleepingComputer.com) на ваш рабочий стол. Существуют версии 2. оценили.

Загрузите Security Check отсюда или здесь и сохраните его на рабочем столе.

Просто выйдите из программы. Когда закончите, отправьте два созданных журнала, они будут находиться в папке MBAR ….. Документ Notepad должен автоматически открываться под именем checkup.txt; инструкции внутри черного ящика.

Если один из них не будет запущен, загрузите и попробуйте запустить другой. Дважды щелкните SecurityCheck.exe. Следуйте по экрану, пожалуйста, разместите содержимое этого документа. ПРИМЕЧАНИЕ 1.

WLM — Ручка не тровато / Ручка не найдена

Allego il report relativo al mio pc, после установки все в порядке, программа не запускается.
Dopo aver preso un virus impestato tramite Запустите сканирование, включите

Information on A/V control HEREPlease, the internet and disable all antivirus protection. Any idea on how message «HANDLE NON TROVATO (HANDLE NOT FOUND). I tried to reinstall WLM, even older versions, but Windows Live Messenger, ho cercato di rimuovere tutto.

После загрузки инструмента отсоединение от темы не было умышленно упущено. Сохраните его на рабочем столе. DDS.comDDS.scrDDS.pifDouble щелкните по значку DDS, разрешите его A / V и подключитесь к Интернету. sUBs из одной из следующих ссылок. Твой английский

Единственное, что у меня есть, это ошибка для решения этой проблемы? Проделайте следующее сканирование. Загрузите DDS, чтобы просмотреть текущее состояние вашего устройства. Spero in capire se c’e ‘ancora crche virus o anomalia presente. Il risultato e ‘semper lo stesso ora: il programma non

Если нет, пожалуйста, выполните следующие шаги ниже, поэтому мы расстанемся с ошибкой HANDLE NON VALIDO. Grazie.R, K

отлично. qualche aiuto. Позволяет больше помощников работать с вами.

Обратите внимание, что мы и мы стараемся не отставать. для запуска. Открывается небольшая коробка с объяснением об инструменте. Большое спасибо, Маурицио

Приветствуем, что мы являемся сайтом на английском языке. Здесь на Bleeping Computer …

T430s — BSOD (сбой состояния питания драйвера). Пожалуйста, помогите определить водителя

загрузите и установите все необходимое, прежде чем приступать к дальнейшим действиям. Вы выполнили все обновления Windows и размер ~ 500 МБ) или файл minidump (из / Windows / Minidump / folder, ~ 700 KB в размере)? Привет, Добро пожаловать на форум!

Minidump будет достаточно, выгрузите его на любой свободный ноутбук) поможет нам и вам помочь!

сообщение — driver_power_state_failure.

Вентилятор Go пользуется своим рабочим инструментом

Решено!

I’m experiencing regular BSODs on my T430s almost every day. Your full Machine Type (sticker at the botom cover of also had it with an older T500, but not on T420). Drives me nuts! I know this is quite a common issue (I you have the latest drivers for your hardware?

Or both? Please help a fellow ThinkPad Which file is needed for that — the complete memory dump (from /Windows/ folder, to Solution. This happens Install and run Thinkvantage System Update and let it / Win7 when going into sleep mode (Fn-F4).

Служба ошибок и отправьте ссылку здесь.

Также странно, что вы не можете установить пакеты .Net.

BSOD — отказ состояния питания драйвера / драйвер IRQL не менее или равно

Алесь

заставить ПК спать.

Здравствуйте,

Я был бы признателен за любую помощь со следующей проблемой: ПК иногда кажется, что проблема не будет, если питание компьютера будет подаваться от адаптера, говорящего об отключении, в то время как ПК уже перестает работать. Другими важными симптомами являются: Может случайно отображать BSOD с ошибками, названными в названии, я также прикрепляю соответствующие скриншоты.

Спасибо, что не выключите ноутбук. Будет бесконечный синий экран И на экране будет некоторое содержимое (видео в VLC f.ex.). Я также не могу много помочь. Если я иду в спящий режим, дисплей становится черным, ПК все еще работает и дальше, и я больше не могу вернуться на рабочий стол.

Ошибка обновления драйверов драйверов и драйверов Intel Rapid Storage

это тоже не работает. Все, что я должен сделать, чтобы установить это. Я понятия не имею, почему, но есть и другой драйвер

он продолжает сканирование, загрузку, установку: отказ.

Источник

Обновлено: 08.02.2023

Есть материнка gigabyte Ga-x58 Ud3r Rev 2.0
Стояла старая версия (2009 года). Решил обновить на последнюю версию 12 года через qflash,и выдаёт ошибку “file size incorrect”. Решил обновиться на версию 11 года, получилось. С нее пытаюсь обновиться на более новые-та же ошибка. В одной из версий указано запустить flashspi.exe,но windows пишет, что невозможно открыть. Кст, когда пытался обновить было видно, что текущая версия весит 1 мб, а та, которую пытаюсь установить, -2 мб. Что делать?

Всм. С официального сайта скачиваю версию для моей модели

flashspi.exe работает из-под DOSa. И там архив в архиве. Надо все распаковывать и кидать на флэху последние 3 файла. И флэху сделать с ДОС строкой или типа с Нортон коммнандером, но тогда, просто вкорне диска С: сделай папку с названием прошивки типа F5. Дальше когда с Нортона загрузишься иди в эту папку и запусти flashspi.exe

Закинь в папку F5 последние 3 файла и перегрузись с флешки и шейся.

Не особо понял. Мне нужно открыть этот exe с помощью, например Dosbox?

48v44bf5d0 Ученик (121) Аскар Булаев, нет. Надо делать загрузочную флэху с ДОС-ом или Нортоном и грузиться с флехи и уже оттуда из Нортона или ДОСа указать что flashspi.exe лежит в диске С: Папкатакаято

Если все нормально работает тогда, лучше вообще ниче не шить.

Я завтра покупаю rx 570.До этого брал 560, и были артефакты при загрузке биос. Оказалось, что эта проблема 500 серии на всех старых мат платах. В моем случае стояла старая версия.

С помощью программы @BIOS попробуйте, распакуйте сначала файл FN.
Нажмите Update from File, нужен файл x58aud3r (2мб) (один из трёх получившихся).

Вы же про официальную утилиту от гигабит. Я пытаюсь установить программу, пишет: open driver handle failure

@BIOS с сайта Gigabite скачайте. У меня тоже самое было один в один, что у Вас. С помощью @BIOS из-под Windows 10 19042.804 20H2 64bit получилось обновить Bios до FD.

Ошибка жесткого диска после замены материнки

Привет. Поменял сегодня материнскую плату и процессор.
После запуска первого выставил диск с какого загружаться.
Перезагрузившись комп выдал надпись :
WARNING: Please back-up your data and replace your hard disk drive.
A failure may be imminent and cause unpredictable fail.
Press F1 to Run SETUP

Собственно, теперь он загружается так постоянно.
Поставив все в старую мать — работает нормально и без ошибок.

Убрал подтверждение F1 в биосе и теперь только оповещение спикера, которое дико напрягает.
Поискав по форумам — ничего толкого не нашел. Совет один — заменить жесткий диск, так как он скоро умрет.
Но у людей с этой ошибкой все работает и год и два. На старой матери все нормально работает, без ошибок.

Старая мать — msi h110 pc mate
старый проц — i5 7500

новая мать — asus strix B250G gaming
новый — i7 7700

Система и все важные файлы на ssdшке. Всякий хлам, тяжелые приложения на hdd.

Ошибка, постоянный перезапуск после замены жесткого диска и установки Windows 7
Здравствуйте, господа! Очень прошу помощи. Ситуация такова. Старый жесткий диск (Seagate).

Не включается компьютер после замены жёсткого диска
Здравствуйте. Ситуация такая: в конце февраля сгорел родной жёсткий диск моего относительно нового.

Ошибка ЖД после замены материнки
У меня такая же проблема как здесь, но у меня разделе PCH Configuration нету Smart Self Test.

Ошибка 0x0000007B после переразметки жесткого диска
Здравствуйте, у меня при загрзке компьтера вылезает ошибка 0x0000007B. После чего она появилась.

Open device failure/ open driver handle failure gigabyte

«Open device failure/ open driver handle failure» message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

Brett928S2

Champion

Files are for CORRECT Operating system ??

All the best Brett

JayInHawaii

Honorable

Yes. I have tried installing from the gigabyte dvd that came with the mb and also downloading install packages from gigabyte’s site.

I have a hundred other programs that installed just fine. My drivers and bios are the latest.

JayInHawaii

Honorable

Oh well, live and learn.

vegas311

Honorable

vegas311

Honorable

himnextdoor

Honorable

Did you try to install these utilities in Compatibility Mode?

And Run as Administrator?

vegas311

Honorable

Did you try to install these utilities in Compatibility Mode?

And Run as Administrator?

I did. Both Tried the CD that comes with mobo and from the One from Giga site but nothing works.

himnextdoor

Honorable

Could you tell me the name of the mobo and the names of the apps you are trying to install?

vegas311

Honorable

Sorry i dont have a link.
The board is GA-Z87 D3HP
and i want to install apps from the CD that comes with it.

Easytuner
Tweaker
@Bios
and something like APP.

himnextdoor

Honorable

You do have Windows 7 Service Pack 1 installed on your machine, don’t you?

vegas311

Honorable

Am not to familiar with service packs. Or i just didnt noticed mine. But i have win7 64 bit installed

himnextdoor

Honorable

Am not to familiar with service packs. Or i just didnt noticed mine. But i have win7 64 bit installed

Right-click on ‘Computer’ and select ‘Properties’ from the bottom of the menu that pops up.

Read the Windows information at the top op that disk. Is there any mention of ‘Service Pack 1’?

If it isn’t there and you would like it, then Google ‘Windows 7 Service Pack 1’ and download and install either the 32- of 64-bit version as appropriate to your system.

Then try running your apps again.

To check: Right-click on ‘Computer’, select ‘Manage’, open ‘Services and applications’ and then ‘Services’.

Are they disabled? Try setting them to ‘manual’ first.

If that doesn’t help, try setting them to ‘automatic’.

Hope this helps.

vegas311

Honorable

thanks for the infos. i cant seem to find the service pack 1 in computer properties/ Windows Information.. But i find it in system Information written like this «6.1.7601 Servicepack 1 Build 7601»

bout the services.. Microsoft Netframework v4 is already in Auto mode. tried «Manual» but still installation didnt work.

himnextdoor

Honorable

thanks for the infos. i cant seem to find the service pack 1 in computer properties/ Windows Information.. But i find it in system Information written like this «6.1.7601 Servicepack 1 Build 7601»

bout the services.. Microsoft Netframework v4 is already in Auto mode. tried «Manual» but still installation didnt work.

Well, now, if I were in your position, this would bug the hell out of me and so I will make a suggestion by way of explaining what I would do next.

Firstly though I have to bore you by sharing some of my thoughts with you.

What I’m wondering is: Is Microsoft tacking to the same wind as Sony et al and attempting to move away from older protocols by ‘discrediting’ the technology that most of us are happy with?

It is change for the sake of change.

And this is what I mean by ‘The Emperor wears no clothes’.

We trust Microsoft to produce good software. And I’m sure they could but what use is an ‘everlasting light-bulb’ to a company that produces light-bulbs?

They change their driver language protocols and we all rush out to buy new machines with the ‘crappy, plagiarised from Android Tablet O/S’s’ Windows 8 preinstalled.

Got a graphics problem? Buy a new machine.

Got an internet problem? Buy a new machine.

Sound problem? USB problem? Flat tyre on the car? Buy a new machine?

And there is plenty of room on the band-wagon for other hardware producers too.

Printer compatibility problem? Buy a new Printer. I’ve seen it. Qualified by the price of ink making it more economical to do so.

And we do! We trot up to Curry’s or PC World and pay them to put our lives back into the order that we had become used to.

But we don’t want to change, we don’t need to change, it is ‘them who in the grip of a recession, force us to change.

Intel, NVidia, Radeon, Realtech, Creative. the band-wagon is huge and all they have to do is abdicate responsibility for the drivers that implement their hardware — we need Microsoft to integrate all these services and they do so in a way that benefits shareholders much more than it benefits the user.

I did say that I would bore you.

So, in your position, and it shouldn’t come as a surprise to you, I would do the following:

In essence, what I am going to suggest is to try and install things in a different order and to try as far as we possibly can to minimise Microsoft’s involvement in the process.

And the first thing I would do is to make sure I had my current system backed up so I could return to where I am now if something goes wrong.

If you need help here, then there are a few other threads that you can peruse on this site that deal with the issue; there may even be a ‘Tutorial’ on it.

I’m talking about creating an image of your system and storing it on an external hard drive.

When I was sure that my system was safely tucked away somewhere, then I would start uninstalling and the first thing I would uninstall is ‘Internet Explorer 10’ if indeed it is installed.

I’d want to know.

(Before I did any of this, I might check to see if the driver package that came with the motherboard would operate in the current environment.)

Find Internet Explorer 10 on the list and uninstall it.

When this was done and I’d made sure that I can get back online again, I would uninstall the Service Pack from the same list.

While I was at it, I would remove every single security update that I could find and then I’d be done with this page.

In fact, I would probably remove all the updates if I had unlimited and fast broadband and I would be a little more judicious about what is being installed onto my machine by doing it manually.

I would then turn of ‘Automatic Update.

I would then go to ‘Device Manager’ and uninstall all the drivers that apply to the motherboard. If I had a sound-card attached, I would uninstall and remove this too.

Also, I would uninstall and remove all my attachable device like printer, wireless mouse, etc, I would strip the system bare. (I wouldn’t be worried, I have my back-up.)

Now, I would have a minimal Windows installation with no drivers, practically at the point at which the motherboard was installed and Windows is running for the first time.

Now, when Windows starts, it should be missing drivers. It might have installed some generic ones but there will still be a yellow exclamation mark or two in Device Manager.

At this stage, I would try to install the utilities, not the drivers, onto the machine.

Another thing that just struck me, is the disk that came with the motherboard bootable?

Then try installing the apps again.

In order to do that, I would need to know that in a system that contains only the motherboard and an O/S that it claims to support, the software utilities provided by Gigabyte won’t install.

Значит нету программы (.exe) которая может выполнять данную функцию, когда ты пишешь допустим ipconfig, то выполняется программа которая выписывает данные, и все.

Я вписывал эту команду для решения проблемы с утилитами Gigabyte с диска, как мне «Добыть» эту exe программу, если эти программы вообще не устанавливаются?

Chelovek Lopatka Гуру (3940) Она по идеи должна быть в Windows, если у вас не сборка конечно.

Chelovek Lopatka Гуру (3940) Заметил что у тебя на рабочем столе Reg Organizer, не удивился что у тебя не работают все пакеты.

Читайте также:

Как выдать автомат в майнкрафт

Как найти хаммонда в ведьмаке 3

Истории пьяницы genshin impact где найти

Advanced vector extensions 2 как проверить

Что такое last day on earth

Источник

Содержание

Meaning of Open Driver Handle Failure?

Causes of Open Driver Handle Failure?

More info on Open Driver Handle Failure

Ошибка жесткого диска после замены материнки

Open device failure/ open driver handle failure gigabyte

Brett928S2

Champion

JayInHawaii

Honorable

JayInHawaii

Honorable

vegas311

Honorable

vegas311

Honorable

himnextdoor

Honorable

vegas311

Honorable

himnextdoor

Honorable

vegas311

Honorable

himnextdoor

Honorable

vegas311

Honorable

himnextdoor

Honorable

vegas311

Honorable

himnextdoor

Honorable

More info on
Open Driver Handle Failure