Error required files are missing

Error required files are missing

Hi all. I’ve seen this topic posted a few times in different places, but never a solid resolution. I’m running RetroPie 2.2 (updated to 2.3 though), and I have a full 0.37b5 romset, verified by clrmamepro with no missing/errors. I’ve tried a few different roms (nbajam and kof94) with no luck, same error on both. I’ve tried keeping my roms in /home/pi/RetroPie/roms/mame and I’ve tried putting them in /opt/retropie/emulators/mame4all-pi/roms (and changing the es_systems.cfg file to reflect that) and gotten the same thing.

Whether I launch a game from EmulationStation or from “./mame ”, I get the screen resolution change and then a list of files and the error “ERROR: required files are missing, the game cannot be run.” It flashes pretty fast, but some that I’m seeing are (these files were from KOF94.. the question marks represent letters that were off my screen and I’m sure there were more missing above what I was able to see):

I tried extracting the zip file, since I see all of those files in there, but no luck there either. Am I missing something simple? Appreciate any help.

Try copying es_systems.cfg to /home/pi/.emulationstation/ and edit rom location in there to /opt/retropie/emulators/mame4all-pi/roms

Thanks for the reply, gave that a shot (didn’t have to modify the es_systems.cfg file since I already have ROMs pointing at that dir) and restarted ES and still got the same errors.

I don’t know what to suggest apart from double checking the path in es_systems.

Thanks anyway, appreciate the attempt. I would think the paths would have to be good because otherwise they wouldn’t show up in ES at all, right?

Yes good point! Try this:

sudo chown -R pi:pi /opt/retropie/emulators/

Did the permissions change and still get the same “not found” errors. 🙁

I’ve been trying to reproduce the errors loading roms, when roms are placed in the home/RetroPie/roms/mame/ they won’t load. But if you place the roms in the mame4all-pi/roms/ directory and edit es_systems.cfg accordingly they load fine. I would say the actual roms could be the problem, can you try one from another source?

I have same problem. Some of the roms works but many them says that Required Files are missing error.

Ok I’ve gotten some resolution on this, but I’m still not 100% where I want it to be. There’s also a mame.cfg file located at /opt/retropie/emulators/mame4all-pi/ that has a line marked “rompath”. By default it’s looking in /home/pi/RetroPie/roms/mame so I think that’s why it’s showing “missing files” when I try to launch a game from ES.

If I put a game in the /home path it doesn’t show up in ES (even if I change es_systems.cfg to look in the /home path like every other emulator). If I put a game in the /opt path, i get the file not found errors. If I put the game in BOTH paths, it works fine. Anyone know of yet another config file I might be missing that’s conflicting with one of these and causing this? Really would rather keep all my games in the /home path since I have a higher capacity USB stick mounted there.

I have the same problem with retropie.
Resolution changes and says..
“Error: Required files are missing”

Mame is the only reason I started this project ;-(

Did you follow the steps I did in my last post to at least get the games to run?

Yes, I put the Mame roms in both directories;
/home/pi/RetroPie/roms/mame
/opt/retropie/emulators/mame4all-pi/roms

NOTE: I put them in the roms directory for opt path.

inside mame.cfg file;
rompath=/home/pi/RetroPie/roms/mame
samplepath=samples

And you still don’t get the roms to work even when they’re in both directories? That’s new to me.. worked right away when I did it. 🙁

Was that the correct directories?

You shouldn’t need the ROMs in both locations. I just loaded RetroPie 2.3 from a fresh image download and mame4all-pi works perfectly. I did NOT need to modify any files (i.e. – es_systems.cfg and mame.cfg are now configured correctly to dump ROMs into /home/pi/RetroPie/roms/mame/ and just go!

What has been missing from mame4all-pi directory in the RetroPie builds is several folders. I just download mame4all-pi from the original website and move the missing folders into /opt/retropie/emulators/mame4all-pi/. I don’t think that is the problem though. It’s nice to do as they don’t even have the artwork or samples folders (samples are nice for games like Donkey Kong, etc.) Maybe they will correct all the missing directories in a future build.

When you used ClrMamePro to verify your sets did you use split-merge, non-merged or merged? From the list of ROMs in your original post you’re still missing kof94_p1.rom in the zip. I still don’t think that’s your problem as it’s not finding ANY of the ROMs in that list and it is almost the complete list of ROMs needed for that game. They all show missing. It’s also a parent/master game so no additional files would be required to run it.

Here’s the list with file size, CRC and ROMset name:

kof94_c1.rom | 2097152 | b96ef460 | kof94 |
| kof94_c2.rom | 2097152 | 15e096a7 | kof94 |
| kof94_c3.rom | 2097152 | 54f66254 | kof94 |
| kof94_c4.rom | 2097152 | 0b01765f | kof94 |
| kof94_c5.rom | 2097152 | ee759363 | kof94 |
| kof94_c6.rom | 2097152 | 498da52c | kof94 |
| kof94_c7.rom | 2097152 | 62f66888 | kof94 |
| kof94_c8.rom | 2097152 | fe0a235d | kof94 |
| kof94_m1.rom | 131072 | f6e77cf5 | kof94 |
| kof94_p1.rom | 2097152 | f10a2042 | kof94 |
| kof94_s1.rom | 131072 | 825976c1 | kof94 |
| kof94_v1.rom | 2097152 | 8889596d | kof94 |
| kof94_v2.rom | 2097152 | 25022b27 | kof94 |
| kof94_v3.rom | 2097152 | 83cf32c0 | kof94 |

Источник

FIX: Windows Cannot Install Required Files on Windows 10/11

Attaching your hard drive to a different SATA port might solve this issue

• Windows always had a rather easy installation process. However, during the installation, errors can occur and interrupt the process, stopping you from ever completing it.
• Reset your computer to default values, and check your HDD, SSD, and RAM. Double-check the physical DVD used or make sure the iso file is undamaged.

Installing Windows can be a tedious process, and sometimes errors such as Windows cannot install required files can appear and interrupt your installation. This is a big problem, and today we’ll show you how to fix it.

Windows cannot install required files error while installing Windows, how to fix it?

1. Make sure that your DVD drive is clean

If you’re installing Windows from a DVD or a CD, you might encounter Windows cannot install required files message if your lens is dirty. To fix this problem, it’s advised that you clean your DVD drive lens and check if that solves the problem.

There are several methods to do this, and you can a disc with a brush to clean your drive. Alternatively, you can open your DVD drive and clean it, however this may void your warranty. If you’re not careful you can even damage your DVD drive, so if you don’t know what you’re doing, we advise you to stay away from this method.

After cleaning your drive check if the problem is resolved. If you don’t have the necessary tools to clean your drive, make sure that your DVD disc doesn’t have any scratches on it. If your disc is scratched, we advise you to create a new installation disc and try using it instead.

2. Remove overclock settings

Many users tend to overclock their hardware in order to achieve enhanced performance. By overclocking your hardware you put extra stress on it, and sometimes overclock settings can prevent you from installing Windows.

Several users reported Windows cannot install required files message while trying to install Windows on overclocked PC. According to them, the only way to fix this problem was to enter BIOS and remove overclock settings. After disabling overclock settings, try to install Windows again and check if the problem is still there.

3. Attach your hard drive to a different SATA port

If you keep getting Windows cannot install required files message, the problem might be your SATA port. It seems that certain glitches can occur, but several users claim that they fixed the problem simply by connecting their hard drive to a different SATA port.

To do that, you’ll need to power down your PC, disconnect it from the power outlet, open the case, and connect the SATA cable that goes to your hard drive to a different SATA port on your motherboard. If you’re installing Windows from an optical media, you can also connect your DVD drive to a different SATA port and check if that helps.

Bear in mind that opening your computer case will void your warranty if you purchased a prebuilt PC.

4. Make sure that you’re installing the correct version of Windows

As you may know, there are two types of Windows available, 32-bit and 64-bit. While 32-bit is almost completely replaced by a 64-bit version, but some users might still use 32-bit hardware. Bear in mind that you can’t install a 64-bit version of Windows on 32-bit hardware, and if you try to do so, you might get Windows cannot install required files.

Therefore, before you try to install Windows 10, check what type of motherboard and CPU are you using. Almost all new hardware is using 64-bit architecture, so if you purchased a new PC, it’s rather likely that you have a 64-bit CPU. However, you can always visit the manufacturer’s website and double-check it just in case.

Read more about this topic

5. Disable Execute Disable Bit option in BIOS

Expert tip:

SPONSORED

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken.
We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

According to users, sometimes Windows cannot install required files message can appear due to certain settings in BIOS. According to users, it seems that Execute Disable Bit setting was causing this issue in BIOS.

To fix the problem, enter BIOS, locate this setting and disable it. To see how to access BIOS and disable this setting on your PC, be sure to check the motherboard manual for detailed instructions. Once you disable this feature, check if the problem is still there.

6. Make sure that you’re not installing Windows on a large partition

Windows cannot install required files message can sometimes appear if you’re trying to install Windows 10 on a large SSD. Few users reported this issue while trying to install Windows 10 on an SSD drive that had a single large partition.

According to users, they had to create two partitions on their SSD drive, and after doing that, the problem was resolved and Windows was installed without any issues. We’re not certain how and why this problem occurs, but if you’re trying to install Windows 10 on a single partition SSD, be sure to try this solution.

7. Change the hard drive type to IDE

If you’re getting Windows cannot install required files while trying to install Windows 10, perhaps the issue is your BIOS configuration. According to users, sometimes this problem can occur if your hard drive is set to work as an AHCI device.

To fix the problem, simply enter BIOS and change the hard drive type to IDE. Once you do that, you should be able to install Windows without any issues. After you install Windows, you can switch back to AHCI mode and everything should work without any problems.

8. Check your hardware

In certain instances, your hardware can lead to this and many other problems. If you keep getting Windows cannot install required files message, it’s advised that you inspect your hardware and ensure that it’s working properly.

The most common cause for this problem is your RAM, and in order to test your RAM, we advise you to try removing additional RAM modules and try installing Windows with only one RAM module in your computer.

If you want to be sure that your RAM is the problem, we advise you to use the MemTest86+ tool and use it to test your RAM. Simply start this application from a flash drive and let it run for a couple of hours. If it gives you any errors, it’s certain that one of your modules is damaged.

To find out which module is the problem, you can test them individually with MemTest86+, but that might take a while. If your RAM isn’t the problem, perhaps you should inspect other components and check if they are working properly.

Windows cannot install required files message can prevent you from installing Windows, but you should be able to fix this problem by using one of our solutions.

Here are some similar problems that users reported:

• Windows cannot install required filesWindows 10 0x80070570, 0x8007045d, 0x80070003, 0x80070002, 0x8007025d – This issue can occur if your installation media is damaged. Be sure that your DVD disc isn’t damaged or create an installation media on USB flash drive and try to install Windows again.
• Windows cannot install required files network problems may be preventing, the file may be corrupt, the file does not exist, may be corrupt or missing – These are various problems that can appear, but you should be able to fix most of them using the solutions from this article.
• Windows cannot install required files. make sure all files required for installation are available – This error message usually occurs when there is a problem with the installation disk or flash drive.
• Windows 10 setup cannot continue due to a corrupted installation file – This usually happens with files downloaded over the Internet, and one of the solutions from this article should help.
• 0x80070022 windows cannot install required files Windows 10 – If using the official Media Creation Tool gives this error, switching to Rufus to burn the ISO to the flash drive should fix the issue.
• Windows encountered a problem installing the driver the system cannot find the file specified – Use chkdsk first and then manually download the appropriate driver to fix this issue.

Still having issues? Fix them with this tool:

Источник

Click here follow the steps to fix Mame32 Error Required Files Are Missing and related errors.

Instructions

Note:
This article was updated on 2023-02-03 and previously published under WIKI_Q210794

What is Mame32 Error Required Files Are Missing error?

The Mame32 Error Required Files Are Missing error is the Hexadecimal format of the error caused. This is common error code format used by windows and other windows compatible software and driver vendors.

This code is used by the vendor to identify the error caused. This Mame32 Error Required Files Are Missing error code has a numeric error number and a technical description. In some cases the error may have more parameters in Mame32 Error Required Files Are Missing format .This additional hexadecimal code are the address of the memory locations where the instruction(s) was loaded at the time of the error.

What causes Mame32 Error Required Files Are Missing error?

The Mame32 Error Required Files Are Missing error may be caused by windows system files damage. The corrupted system files entries can be a real threat to the well being of your computer.

There can be many events which may have resulted in the system files errors. An incomplete installation, an incomplete uninstall, improper deletion of applications or hardware. It can also be caused if your computer is recovered from a virus or adware/spyware
attack or by an improper shutdown of the computer. All the above actives
may result in the deletion or corruption of the entries in the windows
system files. This corrupted system file will lead to the missing and wrongly
linked information and files needed for the proper working of the
application.

How to easily fix Mame32 Error Required Files Are Missing error?

There are two (2) ways to fix Mame32 Error Required Files Are Missing Error:

Advanced Computer User Solution (manual update):

1) Start your computer and log on as an administrator.

2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.

3) In the new window, select «Restore my computer to an earlier time» option and then click Next.

4) Select the most recent system restore point from the «On this list, click a restore point» list, and then click Next.

5) Click Next on the confirmation window.

6) Restarts the computer when the restoration is finished.

Novice Computer User Solution (completely automated):

1) Download (Mame32 Error Required Files Are Missing) repair utility.

2) Install program and click Scan button.

3) Click the Fix Errors button when scan is completed.

4) Restart your computer.

How does it work?

This tool will scan and diagnose, then repairs, your PC with patent
pending technology that fix your windows operating system registry
structure.
basic features: (repairs system freezing and rebooting issues , start-up customization , browser helper object management , program removal management , live updates , windows structure repair.)

инструкции

Примечание:
Эта статья была обновлено на 2023-02-03 и ранее опубликованный под WIKI_Q210794

Meaning of required files missing?

Ошибки, связанные с диском, часто являются основной причиной ошибок файловой системы в операционной системе Windows. Это в основном можно объяснить такими проблемами, как плохие сектора, коррупция в целостности диска или другие связанные с этим проблемы. С огромной программной системой, такой как Microsoft Windows, которая предназначена для выполнения чрезвычайно большого числа задач, в какой-то момент следует ожидать ошибок, связанных с файловой системой.

Некоторые из этих ошибок также могут быть вызваны сторонними программами, особенно теми, которые зависят от ядра Windows для запуска. Обычные пользователи могут также запускать такие ошибки файлов при интенсивном использовании.

Causes of required files missing?

Большинство этих ошибок файлов можно легко устранить, применив последние обновления программного обеспечения от Microsoft. Однако иногда некоторые типы ошибок могут быть тяжелыми для ремонта.

Для более сложных проблем с файловой системой общие решения включают следующее:

• Сброс окон
• Выполнение ремонта системных файлов
• Очистка кэша хранилища Windows
• Ремонт компонентов
• Переустановка приложений Windows

Вы также можете использовать утилиту Средство проверки системных файлов инструмент для исправления поврежденных и отсутствующих системных файлов. В то же время, Проверить диск chkdsk также можно использовать для проверки целостности файловой системы и определения местоположения поврежденных секторов на жестком диске.

More info on
required files missing

РЕКОМЕНДУЕМЫЕ: Нажмите здесь, чтобы исправить ошибки Windows и оптимизировать производительность системы.

Необходимые файлы .DLL отсутствуют.

I recently purchased a digital camera and since I don’t have to my problem with installing the driver? able to install the driver. Also, I’m told that Windows 2000, a USB driver must be installed (on an accompanying disc). Notepad cannot be located.

Может ли сообщение об ошибке быть подключено? Я не был

Itunes не может работать, потому что некоторые из его необходимых файлов отсутствуют.

Well I’ve reinstalled it a number of its and it kept giving me the same error message. It worked but once the program was closed it wouldn’t

получить 98 недостающие файлы

поиск, они, вероятно, там, — просто скрытые
Хотя вы не можете видеть файлы в

URGENT HELP REQUIRED PLS&THX!!! re: missing files on HD partition

Надеюсь, вы, ребята, поняли, что файлы все еще находятся в исходном месте. Как обновить большую вещь здесь. Вы пытались увидеть, случайно ли я переместил папки, но ничего не вышло! Кроме того, вы не изменили ни одного или xp?

Разве что раздел 1gb на первичном является физически отдельным диском, а не только логическим или расширенным.

Я знаю, что файлы и папки все еще находятся в том, что может быть причиной и возможным решением. от одного жесткого диска к другому через динамический? Это все режимы жесткого диска?

Поместить файл подкачки на другой диск идеально, но он имеет, но мне действительно нужна помощь. Большое спасибо за то, что нашли время, чтобы прочитать длинное объяснение, и я надеюсь скоро получить ответы! Является ли объем любого из них, казалось бы, хорошим местом, чтобы начать спрашивать. Поэтому я не знаю, что делать, и оригинальной папки, но я просто не могу получить к ним доступ по какой-то причине.

Драйвер Nvidia vga, необходимые файлы отсутствуют

Обновление до ssd, отсутствие диска восстановления / требуемых файлов

Я проверил hdd, и, похоже, я заказал новый ram и ssd, чтобы не было здоровых разделов восстановления на диске. но я не уверен в всех компонентах этого ноутбука.

If it were a computer I had built that would be one usb, and it says that there are required files missing. I went to go create recovery media on a upgrade the computer to make it more usable for my needs. I am looking for any advice that

вы можете дать на мою ситуацию. Спасибо заранее.

Необходимые файлы, отсутствующие, не могут сделать диск восстановления

Я хотел создать восстановительный диск, который, надеюсь, обновился до 7, потому что мой университет предложил обновления для $ 7. Это не вирус для загрузки Windows 8.1 ISO с ключом Windows 8. Также на моем ПК в настоящее время нет диска, и я удалил его. Что делать

Вы, ребята, предлагаете? Затем я обновился до 8, когда я убедился в этом. эти сообщения для получения дополнительной информации. Взгляните на проблемы с 8.1.

Can’t create a Windows 10 recovery usb drive. Some required files are missing

Он получил немного дальше и начал писать, чтобы диск был D :. Каждая из трех папок имеет несколько файлов, которые могут иметь какое-то отношение к ней, не имея возможности найти winre.wim. Reagentc / info
Поскольку вы, похоже, изменили свои разделы, это USB-накопитель, но застрял, возможно, в 15%. Может быть, поэтому некоторые файлы отсутствуют.

Любая помощь будет оснащена ноутбуком 7559 с жесткими дисками 2. Данные 118 GB — Windows C: и 450 mb — Windows RE Tools partiton. Он провалился и сказал административную команду и введите:
ПФС / SCANNOW
Сообщите об ошибках. Может ли проблема быть оценкой, спасибо.

creating the usb fails? I have a Dell Inspiron 15 7000 the bcd file winre reference. You might run a System file check on your install.  Open command below and copy and paste the results.

в них для bcd или для сценариев Dell в источниках. Когда он терпит неудачу, usb имеет следующие папки:

Не удается создать диск восстановления Windows 10; требуемые файлы отсутствуют …

любая информация. Вы можете создать Clone Image вашего компьютера и иметь раздел EFI в начале моего системного диска. Почувствовав это, я должен сказать, что неудивительно, что теперь для меня это harddisk0 и partition2, потому что я диск и номер раздела системы.

требуемый параметр отсутствует

отсутствующий драйвер CD / DVD

Ни одна конфигурация не работала, и я не могу найти драйверы для CD / DVD-привода. Вторая конфигурация была IDE CD / DVD-мастером, 80GB IDE HD slave.

missing api-ms-win-crt runtime L1-1-0.dll which is required…

Необходимый драйвер CD DVD отсутствует

требуемый файл dll отсутствует

Необходимый драйвер CD / DVD отсутствует

для изменения порядка загрузки. Предположим, что вы правильно обновили драйвер перед попыткой обновления. Недостаточно попробовать вернуться в Windows Vista или XP. Я был бы признателен за любую подготовленную флешку USB для загрузки.

Запустите Windows Update и установите «Если у вас есть дискета с драйверами, CD, справка, спасибо заранее. Обратитесь к руководству вашего компьютера или попробуйте
Enter your system’s BIOS mode. I downloaded Windows 7 via the MSDN Academic Alliance and keys until you find the right one.

Однако, когда я нажимаю кнопку Install, он говорит, что он начал установку, а затем скопировал все файлы на недавно переформатированный USB-накопитель 4Gb. Найдите экран или все. Кроме того, я предполагаю, что DVD-привод — это пустые устройства, отличные от kybd и mouse. ТАКЖЕ — отключите всю USB-загрузку с USB-накопителя, и он загрузится, а затем запустится.

Привет DVD или USB-накопитель, пожалуйста, вставьте его сейчас. Обновление драйвера ITE ATA
В противном случае, и USB-устройство действительно является единственным загрузочным носителем.

Необходимые драйверы CD / DVD отсутствуют.

Я в порядке с установкой Windows XP, но, пожалуйста, идеи или трюки?

Отсутствует обязательный .DLL (Win98SE)

Необходимый раздел диска отсутствует

Обязательный драйвер устройства CD / DVD отсутствует

«A Require CD/DVD Device BIOS. I have researched the topic fairly and i Success.

3. Обновляя CD, DVD или USB, вставьте его сейчас. Ниже приведены методы безопасной загрузки, приоритета загрузки и т. Д., Где это применимо.

Переключение настроек BIOS для поддержки CSM, отключение Success. Нет Dell и перейдите к нему с помощью искателя драйверов при появлении ошибки. быть исправленным или работать вокруг?

Отсутствует требуемый драйвер устройства CD / DVD