Скорее всего подцепили чужую .dll. Бывает, программы ставят свои модули в систему, а они имеют те же имена, что модули nanoCAD-а.
Понять, кто мешает, можно при помощи утилиты Depends www.dependencywalker.com. Запустить Depends, открыть NCad.exe, далее меню ProfileStart profiling.
Попробовал. Если честно, то ничего понятного для себя в логе не обнаружил. На что именно в нем надо обращать внимание?
Есть такие выделенные красным строки, но какой либо полезной информации я из них не могу извлечь:
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsAlloc") called from "NCAD.EXE" at address 0x0040725F and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsGetValue") called from "NCAD.EXE" at address 0x0040726C and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsSetValue") called from "NCAD.EXE" at address 0x00407279 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsFree") called from "NCAD.EXE" at address 0x00407286 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "InitializeSRWLock") called from "IERTUTIL.DLL" at address 0x401D2823 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "AcquireSRWLockExclusive") called from "IERTUTIL.DLL" at address 0x401D2830 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "AcquireSRWLockShared") called from "IERTUTIL.DLL" at address 0x401D283D and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "ReleaseSRWLockExclusive") called from "IERTUTIL.DLL" at address 0x401D284A and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "ReleaseSRWLockShared") called from "IERTUTIL.DLL" at address 0x401D2857 and returned NULL. Error: (127).
GetProcAddress(0x77DC0000 [ADVAPI32.DLL], "EventRegister") called from "WININET.DLL" at address 0x3F9ED3CB and returned NULL. Error: (127).
GetProcAddress(0x77DC0000 [ADVAPI32.DLL], "EventUnregister") called from "WININET.DLL" at address 0x3F9ED3DD and returned NULL. Error: (127).
GetProcAddress(0x77DC0000 [ADVAPI32.DLL], "EventEnabled") called from "WININET.DLL" at address 0x3F9ED3EF and returned NULL. Error: (127).
GetProcAddress(0x77DC0000 [ADVAPI32.DLL], "EventWrite") called from "WININET.DLL" at address 0x3F9ED401 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsAlloc") called from "MSVCR90.DLL" at address 0x78543ACC and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsGetValue") called from "MSVCR90.DLL" at address 0x78543AD9 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsSetValue") called from "MSVCR90.DLL" at address 0x78543AE6 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsFree") called from "MSVCR90.DLL" at address 0x78543AF3 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsAlloc") called from "NVIEW.DLL" at address 0x0108CBE3 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsGetValue") called from "NVIEW.DLL" at address 0x0108CBF0 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsSetValue") called from "NVIEW.DLL" at address 0x0108CBFD and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsFree") called from "NVIEW.DLL" at address 0x0108CC0A and returned NULL. Error: (127).
GetProcAddress(0x00920000 [CSICORE.DLL], "__CSAfxDllMain@8") called from "CSICORE.DLL" at address 0x0094E79D and returned NULL. Error: (127).
GetProcAddress(0x003E0000 [EVENTS5.DLL], "__CSAfxDllMain@8") called from "EVENTS5.DLL" at address 0x003E7AFD and returned NULL. Error: (127).
GetProcAddress(0x00B10000 [CSALGO.DLL], "__CSAfxDllMain@8") called from "CSALGO.DLL" at address 0x00B45CBD and returned NULL. Error: (127).
GetProcAddress(0x00AD0000 [EDC5.DLL], "__CSAfxDllMain@8") called from "EDC5.DLL" at address 0x00AE42DD and returned NULL. Error: (127).
GetProcAddress(0x00BC0000 [CSRULER.DLL], "__CSAfxDllMain@8") called from "CSRULER.DLL" at address 0x00BC527D and returned NULL. Error: (127).
GetProcAddress(0x5B260000 [uXTHEME.DLL], "DrawThemeTextEx") called from "MFC90U.DLL" at address 0x78B21B83 and returned NULL. Error: (127).
GetProcAddress(0x5B260000 [uXTHEME.DLL], "BeginBufferedPaint") called from "MFC90U.DLL" at address 0x78B21B96 and returned NULL. Error: (127).
GetProcAddress(0x5B260000 [uXTHEME.DLL], "EndBufferedPaint") called from "MFC90U.DLL" at address 0x78B21BA9 and returned NULL. Error: (127).
LoadLibraryW("C:WINDOWSsystem32dwmapi.dll") returned NULL. Error: (126).
GetProcAddress(0x00C50000 [iXVSTORAGE.DLL], "__CSAfxDllMain@8") called from "IXVSTORAGE.DLL" at address 0x00C56ECD and returned NULL. Error: (127).
GetProcAddress(0x00BE0000 [sTYLEMAN.DLL], "__CSAfxDllMain@8") called from "STYLEMAN.DLL" at address 0x00C1892D and returned NULL. Error: (127).
GetProcAddress(0x00A80000 [iOMAN5.DLL], "__CSAfxDllMain@8") called from "IOMAN5.DLL" at address 0x00A9A4AD and returned NULL. Error: (127).
GetProcAddress(0x01420000 [OEMINFO.DLL], "__CSAfxDllMain@8") called from "OEMINFO.DLL" at address 0x014265DD and returned NULL. Error: (127).
LoadLibraryW("c:program filesnanosoftnanocad 3.0NCAD.dll") returned NULL. Error: (127).
GetProcAddress(0x75310000 [MSCTFIME.IME], "ImeGetImeMenuItems") called from "IMM32.DLL" at address 0x76367354 and returned NULL. Error: (127).
LoadLibraryW("C:Program FilesNVIDIA CorporationnViewnvwddi.dll") returned NULL. Error: (126).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsAlloc") called from "NVWDDI.DLL" at address 0x01503D83 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsGetValue") called from "NVWDDI.DLL" at address 0x01503D90 and returned NULL. Error: (127).
GetProcAddress(0x7C800000 [KERNEL32.DLL], "FlsSetValue") called f
#1
-
- Members
-
- 2 posts
Newbie
Posted 28 June 2018 — 09:58 AM
Hello,
I installed Nano cad 5.0 on the Windows 7 64 bit. When I’m starting it the message appears — «Error: Some of application components are missing or corrupted. Reinstall aplication to fix this problem». I reinstall it and it doesn’t works. What do you suggest. I would be grateful for help.
- Back to top
#2
Hellen_V
Posted 28 June 2018 — 11:15 AM
Hello Simone,
try to uninstall nanoCAD, then download ftp://ftp.nanocad.co…NCE50(2006).zip , extract it to empty folder and start setup.exe
- Back to top
#3
simone1968
-
- Members
-
- 2 posts
Newbie
Posted 29 June 2018 — 03:52 AM
Hello,
I tried to follow your instructions, but the error remains.
- Back to top
#4
Ivan Dal Corso
-
- Members
-
- 1 posts
Newbie
Posted 16 April 2019 — 03:34 PM
Hi, I also found the same problem as simone1968
I installed nanocad (the free version) in two PCs, in a Sony vaio (x86) which is now 7/8 years old and it works very well but due to its limited hardware I wanted to install nanocad on a PC where I used autocad, an HP 15af005nl (x64) that has a higher performance processor and an 8Gb ram, despite this the program doesn’t want to work, I even formatted the PC to see if I could make it work but nothing ..
At the first start the loading window opens and you jug indicating the error corrupt or missing file … from the second attempt onwards the loading window does not even open .. what can I do to solve the problem?
Thanks
- Back to top
#5
andreash
-
- Members
-
- 1 posts
Newbie
Posted 23 April 2019 — 12:14 PM
Hello,
I have the same problem with Windows 8.1 64bit.
Quote
I installed Nano cad 5.0 on the Windows 7 64 bit. When I’m starting it the message appears — «Error: Some of application components are missing or corrupted. Reinstall aplication to fix this problem». I reinstall it and it doesn’t works. What do you suggest. I would be grateful for help.
Quote
At the first start the loading window opens and you jug indicating the error corrupt or missing file … from the second attempt onwards the loading window does not even open .. what can I do to solve the problem?
Thanks
- Back to top
-
#1
Есть программа для техников БТИ. Называется Plancad. Удобна тем, что имеются шаблоны дверей, окон, стен и т.д.
Сайт программы — http://www.csoft.ru/
Эти же специалисты разработали программу PlanTraccer, с помощью которой можно перевести TIFF -файлы в векторное отображение.
- Регистрация
- 26 Янв 2007
- Сообщения
- 20
- Реакции
- 3
- Баллы
- 39
-
#2
а лечение для этих программ есть или нет, или просто информация что есть такая программа и все???
-
#3
а лечение для этих программ есть или нет, или просто информация что есть такая программа и все???
Лечения не встречал, скорее действительно просто информация.:eh:
- Регистрация
- 22 Ноя 2007
- Сообщения
- 29
- Реакции
- 45
- Баллы
- 54
-
#5
Обычно БТИ «рисуют» схемы в ничтожно мелком формате, на А4. Естественно, возможны искажения. Векторизация соблюдает ортогональность стен?
- Регистрация
- 16 Окт 2010
- Сообщения
- 1,078
- Реакции
- 1,106
- Баллы
- 174
-
#6
ПланКад 2.5.1185.918 Portable.
Особенности версии:
* Портативная версия программы, не требующая установки.
* Лечение проведено.
ОС: Windows XP/Vista/7/8/8.1/10 (x86-x64)
Язык интерфейса: Русский
Размер файла: 151 Mb.
P.S. Добавлены библиотеки
- Регистрация
- 31 Янв 2007
- Сообщения
- 133
- Реакции
- 29
- Баллы
- 0
-
#7
Всё хорошо кроме того, что нет библиотеки объектов.
- Регистрация
- 16 Окт 2010
- Сообщения
- 1,078
- Реакции
- 1,106
- Баллы
- 174
-
#8
Vasil какая у Вас Winда? Нужно прописать путь до UserDataCachesamplesPC_libr
Для тех, у кого: «Error: Some of application components are missing or corrupted.
Reinstall application to fix this problem.»
Необходимо установить Microsoft Visual C++ 2005
-
#10
Более новая версия этой программы зовётся PlanTracer, в народе есть версия 7.0. Но все примитивы из этой программы при открытии dwg в другом софте станут proxy-объектами, имейте в виду.
-
#11
Vasil какая у Вас Winда? Нужно прописать путь до UserDataCachesamplesPC_libr
Для тех, у кого: «Error: Some of application components are missing or corrupted.
Reinstall application to fix this problem.»
Необходимо установить Microsoft Visual C++ 2005
dimston, Добрый вечер, а библиотека шаблонов есть??? Я имею ввиду шаблоны элементов (двери, окна, стены и тд) и как ее найти? Вы в сообщении указали прописать путь, а куда его прописывать? уточните пожалуйста.
remlin
Активный участник
Пользователь
- Регистрация
- 9 Сен 2020
- Сообщения
- 1
- Реакции
- 0
- Баллы
- 0
-
#12
Не работает Win10
А эта программа точно в WIn 10 работает?
выдает ошибку Error: Some of application components are missing or corrupted.
Reinstall application to fix this problem.
Issue
When you try to start Adobe Photoshop or Adobe Photoshop Elements on Mac OS, the application returns the following error:
«Some of the application components are missing from the Application directory. Reinstall the application.»
Solutions
Solution 1: Start Photoshop from the Applications folder.
If you moved the Photoshop application file from its default location, and you start Photoshop from that location, then do the following:
1. If the error window is still open, then click OK to close it.
2. In the Finder, move the Photoshop application file from its current location to the following location:
- Photoshop CS4: //Applications/Adobe Photoshop CS4
- Photoshop CS5: //Applications/Adobe Photoshop CS5
- Photoshop Elements 8: //Applications/Adobe Photoshop Elements 8
- Photoshop Elements 9: //Applications/Adobe Photoshop Elements 9
3. Double-click the Photoshop application icon in the Photoshop folder to start Photoshop.
4. (Optional) For more convenient access to Photoshop in the future, control-click the Photoshop icon in the Dock and select Keep In Dock.
Solution 2: Remove the Locales folder and repair the installation of Photoshop.
-
In the Finder, navigate to the Photoshop application folder.
- If the Locales folder is not listed within the application folder, then skip to Step 5.
- If the Locales folder is listed within the application folder, then drag the Locales folder to the Trash.
-
Choose Finder > Empty Trash.
-
Start the installer for Photoshop or your edition of the Adobe Creative Suite.
- If you purchased boxed software, then insert the installation DVD-ROM into your computer’s DVD drive.
- If you purchased downloadable software from the Adobe Online Store, then double-click the disk image (.dmg) file or files that you downloaded. (If you no longer have the downloaded disk image file or files, then log in to your account at www.adobe.com/membership to download the installer.)
-
Double-click the file named Setup on your installation DVD-ROM or disk image.
-
In the installer window, select Adobe Photoshop in the Installed Products list.
-
(Optional) Deselect Adobe AIR, Adobe Media Player, Adobe Device Central, Adobe Drive, Adobe Extension Manager, Adobe ExtendScript Toolkit, and Adobe Fonts All.
-
Click Install. Follow the onscreen instructions.
After the installation is complete, verify that the installer reported no errors. If the installer reported an error, see the following documents:
- Troubleshoot installation problems with Adobe Creative Suite 4 or Point Products on Mac OS X (kb403986)
- Troubleshoot CS5 installation (cpsid_82827)
- Troubleshoot installation problems | Adobe Premiere Elements 9 | Photoshop Elements 9 | Mac OS (cpsid_85844)
Note: Adobe also recommends that you install all available updates for your product. To download and install updates, start Photoshop, choose Help > Updates, and follow the onscreen instructions. Alternatively, go to http://www.adobe.com/downloads/updates/ to download and then manually run the update installer.