Error sub process usr bin dpkg returned error code 1 как исправить

Если вы столкнулись с ошибкой  с «sub process usr bin dpkg returned an error code 1» при установке программного обеспечения на Ubuntu Linux, вот как вы можете это исправить.

Если вы столкнулись с ошибкой  с «sub process usr bin dpkg returned an error code 1» при установке программного обеспечения на Ubuntu Linux, вот как вы можете это исправить.

Одной из распространенных проблем в Ubuntu и других дистрибутивах на основе Debian являются ломанные пакеты.

Вы пытаетесь обновить систему или установить новый пакет, и столкиваеиесь с такой ошибкой, как «Sub-process /usr/bin/dpkg returned an error code 1.

Вот что случилось на днях.

Я пытался установить радио приложение на Ubuntu, и система вернула мне эту ошибку:

Unpacking python-gst-1.0 (1.6.2-1build1) ...
Selecting previously unselected package radiotray.
Preparing to unpack .../radiotray_0.7.3-5ubuntu1_all.deb ...
Unpacking radiotray (0.7.3-5ubuntu1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5.2) ...
Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20180209-0ubuntu1) ...
Rebuilding /usr/share/applications/bamf-2.index...
Processing triggers for gnome-menus (3.13.3-6ubuntu3.1) ...
Processing triggers for mime-support (3.59ubuntu1) ...
Setting up polar-bookshelf (1.0.0-beta56) ...
ln: failed to create symbolic link '/usr/local/bin/polar-bookshelf': No such file or directory
dpkg: error processing package polar-bookshelf (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up python-appindicator (12.10.1+16.04.20170215-0ubuntu1) ...
Setting up python-gst-1.0 (1.6.2-1build1) ...
Setting up radiotray (0.7.3-5ubuntu1) ...
Errors were encountered while processing:
polar-bookshelf
E: Sub-process /usr/bin/dpkg returned an error code (1)

Здесь важны последние три строки:

Errors were encountered while processing:
polar-bookshelf
E: Sub-process /usr/bin/dpkg returned an error code (1)

Это говорит мне, что пакет полярнаяpolar-bookshelf является причиной. Это может иметь решающее значение для устранения этой ошибки.

Решение проблемы Sub-process /usr/bin/dpkg returned an error code (1)

Попробуем исправить этот сломанный пакет.

Я покажу вам несколько методов, которые вы можете попробовать по одному.

Они простые в использовании и просто без проблем осуществимы.

Вы должны попытаться запустить sudo apt update, а затем попытаться установить новый пакет или обновиться после каждого из описанных здесь методов.

Способ 1: переконфигурировать базу данных пакетов

Первый метод, который вы можете попробовать, – перенастроить базу данных пакетов.

Вероятно, база данных повреждена при установке пакета.

Реконфигурация часто устраняет проблему.

sudo dpkg --configure -a

Способ 2: Использовать принудительную установку

Если установка ранее прервалась, вы можете попробовать установить пакет принудительно:

sudo apt-get install -f

Способ 3. Попробуйте удалить проблемный пакет.

sudo apt remove 

Способ 4. Удалите информационные файлы с информацией о проблемном пакете

Это должно быть вашим последним прибежищем.

Вы можете попробовать удалить файлы, связанные с пакетом, из /var/lib/dpkg/info.

Вам нужно немного узнать о базовых командах Linux, чтобы выяснить, что происходит, и как использовать их с вашей проблемой.

В моем случае у меня была проблема с polar-bookhelof.

Поэтому я искал файлы, связанные с ним:

ls -l /var/lib/dpkg/info | grep -i polar-bookshelf
-rw-r--r-- 1 root root 2324811 Aug 14 19:29 polar-bookshelf.list
-rw-r--r-- 1 root root 2822824 Aug 10 04:28 polar-bookshelf.md5sums
-rwxr-xr-x 1 root root     113 Aug 10 04:28 polar-bookshelf.postinst
-rwxr-xr-x 1 root root      84 Aug 10 04:28 polar-bookshelf.postrm

Теперь мне нужно удалить эти файлы:

sudo mv /var/lib/dpkg/info/polar-bookshelf.* /tmp

Содержание

  1. Как решить ошибку “sub process usr bin dpkg returned an error code 1″ в Ubuntu
  2. Решение проблемы Sub-process /usr/bin/dpkg returned an error code (1)
  3. Способ 1: переконфигурировать базу данных пакетов
  4. Способ 2: Использовать принудительную установку
  5. Способ 3. Попробуйте удалить проблемный пакет.
  6. Способ 4. Удалите информационные файлы с информацией о проблемном пакете
  7. How to Solve “Sub-process /usr/bin/dpkg returned an error code (1)” In Ubuntu
  8. Solution 1: Reconfiguring the dpkg Package
  9. Solution 2: Force Install the Troublesome Package
  10. Solution 3: Purge the Bad or Corrupted Software Package
  11. Solution 4: Remove all the Files Associated with the Package
  12. If You Appreciate What We Do Here On TecMint, You Should Consider:
  13. Fix “Sub-process /usr/bin/dpkg returned an error code (1)” In Ubuntu
  14. Fix «Sub-process /usr/bin/dpkg returned an error code (1)» In Ubuntu
  15. Solution 1 — Reconfigure dpkg database
  16. Solution 2 — Force install the application
  17. Solution 3 — Remove the problematic application .deb file from the local cache folder and reinstall it
  18. Solution 4 — Remove the problematic application
  19. How to Fix sub-process /usr/bin/dpkg returned an error code (1) in Ubuntu
  20. Options to Fix sub-process /usr/bin/dpkg returned an error code (1)
  21. Method 1: Reconfigure dpkg Database
  22. Method 2: Force-Install the Software
  23. Method 3: Remove Bad Software Package
  24. Method 4: Clean Out Unused Software Packages
  25. Method 5: Remove Post Files
  26. Method 6: Overwrite Package File
  27. Please help! Sub-process /usr/bin/dpkg returned an error code (1) Installing MySQL on Ubuntu
  28. 2 Answers 2
  29. There can be Multiple Solutions for the Above
  30. 1. Reconfiguring the dpkg Package
  31. 2. Force Install the Troublesome Package
  32. 3. Purge the Bad or Corrupted Software Package
  33. 4. Remove all the Files Associated with the Package
  34. The Error You are getting is Mysql is unable to install coz port 3306 is already in use.

Как решить ошибку “sub process usr bin dpkg returned an error code 1″ в Ubuntu

Если вы столкнулись с ошибкой с «sub process usr bin dpkg returned an error code 1» при установке программного обеспечения на Ubuntu Linux, вот как вы можете это исправить.

Одной из распространенных проблем в Ubuntu и других дистрибутивах на основе Debian являются ломанные пакеты.

Вы пытаетесь обновить систему или установить новый пакет, и столкиваеиесь с такой ошибкой, как «Sub-process /usr/bin/dpkg returned an error code 1.

Вот что случилось на днях.

Я пытался установить радио приложение на Ubuntu, и система вернула мне эту ошибку:

Здесь важны последние три строки:

Это говорит мне, что пакет полярная polar-bookshelf является причиной . Это может иметь решающее значение для устранения этой ошибки.

Решение проблемы Sub-process /usr/bin/dpkg returned an error code (1)

Попробуем исправить этот сломанный пакет.

Я покажу вам несколько методов, которые вы можете попробовать по одному.

Они простые в использовании и просто без проблем осуществимы.

Вы должны попытаться запустить sudo apt update, а затем попытаться установить новый пакет или обновиться после каждого из описанных здесь методов.

Способ 1: переконфигурировать базу данных пакетов

Первый метод, который вы можете попробовать, – перенастроить базу данных пакетов.

Вероятно, база данных повреждена при установке пакета.

Реконфигурация часто устраняет проблему.

Способ 2: Использовать принудительную установку

Если установка ранее прервалась, вы можете попробовать установить пакет принудительно:

Способ 3. Попробуйте удалить проблемный пакет.

Способ 4. Удалите информационные файлы с информацией о проблемном пакете

Это должно быть вашим последним прибежищем.

Вы можете попробовать удалить файлы, связанные с пакетом, из /var/lib/dpkg/info.

Вам нужно немного узнать о базовых командах Linux, чтобы выяснить, что происходит, и как использовать их с вашей проблемой.

В моем случае у меня была проблема с polar-bookhelof.

Источник

How to Solve “Sub-process /usr/bin/dpkg returned an error code (1)” In Ubuntu

It’s not uncommon to run into an issue of broken packages in Ubuntu and other Debian-based distributions. Sometimes, when you upgrade the system or install a software package, you may encounter the ‘Sub-process /usr/bin/dpkg returned an error code’ error.

For example, a while back, I tried to upgrade Ubuntu 18.04 and I bumped into the dpkg error as shown below.

This indicates that the google-chrome-stable package is either broken or corrupt. There are a few workarounds to this problem, so don’t throw in the towel yet or discard your system.

Solution 1: Reconfiguring the dpkg Package

One of the triggers of this error is a corrupted dpkg database. This can be caused by the sudden interruption of the installation of a software package. Reconfiguring the database is one way to resolve this issue.

To do this, simply execute the command:

This reconfigures the unpacked packages that were not installed during the installation process.

Solution 2: Force Install the Troublesome Package

Sometimes, errors can occur during the installation of software packages. When such happens, you can force install the package using the -f option as shown.

The -f option & —fix-broken can be interchangeably used to fix broken dependencies resulting from an interrupted package or cached package download.

Solution 3: Purge the Bad or Corrupted Software Package

If the first two solutions did not fix the problem, you can remove or purge the problematic software package as shown.

For example, in my case, purging the Google chrome package fixed the issue.

Then invoke the commands below to remove all the old, unused, and unnecessary packages which also frees up space on your hard drive.

Solution 4: Remove all the Files Associated with the Package

Lastly, you can manually remove all the associated with the troublesome package. First, you need to find these files which are located in the /var/lib/dpkg/info directory as shown.

After listing the files, you can move them to the /tmp directory as shown

Alternatively, you can use the rm command to manually remove the files.

Finally, update the package lists as shown:

You can thereafter give it another shot in reinstalling the software package.

Conclusion

This type of dpkg error points to an issue with the package installer usually caused by the interruption of an installation process or a corrupt dpkg database.

Any of the above-mentioned solutions should fix this error. If you have come this far, then it’s our hope that the issue has been successfully resolved and that you were able to reinstall your software package.

Tutorial Feedback.

If You Appreciate What We Do Here On TecMint, You Should Consider:

TecMint is the fastest growing and most trusted community site for any kind of Linux Articles, Guides and Books on the web. Millions of people visit TecMint! to search or browse the thousands of published articles available FREELY to all.

If you like what you are reading, please consider buying us a coffee ( or 2 ) as a token of appreciation.

We are thankful for your never ending support.

Источник

Fix “Sub-process /usr/bin/dpkg returned an error code (1)” In Ubuntu

Today I tried to upgrade my Ubuntu 20.04 LTS desktop and I encountered with this error — «Sub-process /usr/bin/dpkg returned an error code (1)». It is one of the common issue in Ubuntu and other DEB-based systems.

This error usually happens due to a failed application installation, or if the dpkg package installer becomes corrupted or interrupted in mid-way while installing a package.

Here are the commands that I tried to upgrade my Ubuntu desktop:

And. here is the error message:

Fix «Sub-process /usr/bin/dpkg returned an error code (1)» In Ubuntu

If you encountered with an error like above, worry not! Here, I have given a few workarounds to solve «Sub-process /usr/bin/dpkg returned an error code (1)» issue in Ubuntu and its variants such as Linux Mint, Pop OS.

Solution 1 — Reconfigure dpkg database

If the package installation process is stopped or interrupted in mid-way, the dpkg database might be corrupted. Reconfiguring dpkg database may solve this issue.

To reconfigure dpkg database, simply run:

This command will try to fix the corrupted dpkg database and then reconfigure all broken packages. This command usually fixes the dpkg returned an error code (1) problem. If it didn’t solve the issue for any reason, follow the subsequent solutions.

Solution 2 — Force install the application

If the first method didn’t work, run the following command to perform force install:

Here, -f (or —fix-broken ) option will attempt to correct the Ubuntu system with broken dependencies.

If these two solutions didn’t help and the issue still persists, try the next solution.

Solution 3 — Remove the problematic application .deb file from the local cache folder and reinstall it

As you see in the error message (the last two lines), the eog package is causing this error.

For those wondering, eog (short for Eye of GNOME) is the official and default image viewer for the GNOME desktop environment. So this package is problematic and doesn’t let me to upgrade my Ubuntu.

When you install a package, it will be downloaded and saved in the cache folder /var/cache/apt/archives/ .

To fix this error, remove the cached package using command:

Replace eog_3.36.2-0ubuntu1_amd64.deb with your package.

Clean the package cache folder:

Update the source lists:

Upgrade your system:

Finally, get the fresh package from official repositories and reinstall it like below:

This solution worked for me.

Solution 4 — Remove the problematic application

This should be your last resort. If none of the above methods help, remove the problematic package from your system like below:

This command will remove eog with all its configuration files from the system.

And also find and remove all files associated with the broken package.

To find all files related to a package, run:

Sample output:

Remove them manually.

That’s it. At this stage, any one of the these four solutions should have helped you to fix «Sub-process /usr/bin/dpkg returned an error code (1)» in Ubuntu and other DEB-based systems.

Solutions to other common problems in Ubuntu:

Источник

How to Fix sub-process /usr/bin/dpkg returned an error code (1) in Ubuntu

Home » SysAdmin » How to Fix sub-process /usr/bin/dpkg returned an error code (1) in Ubuntu

The error message “Sub-process /usr/bin/dpkg returned an error code (1)” indicates a problem with the package installer. This can happen in Ubuntu after a failed software installation, or if the installer becomes corrupted.

The key phrase in this error is /usr/bin/dpkg. This refers to the dpkg package installer for Linux. A package installer is an application that tracks software, updates, and dependencies. If it is damaged, any new software installation will cause this error message.

We cover several possible solutions, from easily-solved and straightforward solutions to more complex processes. This guide will help you resolve the dpkg returned an error code 1 on an Ubuntu operating system.

  • A user account with sudo privileges
  • A terminal window/command-line (CtrlAltT)

Options to Fix sub-process /usr/bin/dpkg returned an error code (1)

Method 1: Reconfigure dpkg Database

If your package database has become corrupted, reconfiguring it can repair it.

Enter the following command:

This command reconfigures packages that have been unpacked but not necessarily installed. An interruption at the wrong time can cause this database to become corrupt. This is especially helpful if you were running installation and the process was interrupted.

Method 2: Force-Install the Software

If Method 1 does not work, you can attempt to fix the dependencies in the package installer.

Enter the following:

The -f option means fix-broken. It repairs any broken dependencies in your package manager. Broken dependencies occur when a download is interrupted, or there is a problem with the cached download.

Note: Dependencies are other software packages that are required by the software you are installing. A package manager helps keep track of dependencies for you.

Method 3: Remove Bad Software Package

If you know which software caused the errors on your system, you can remove it.

Enter the command and package_name with the name of the software that is causing the problem:

The —purge option directs the system to remove config files in addition to uninstalling. This helps get rid of all traces of the offending software.

Method 4: Clean Out Unused Software Packages

If an old, outdated, or unused package is causing the problem, you can solve the problem by removing unused software packages.

Enter the following command in the terminal:

Note: Avoid the next 2 options unless all other methods have failed.

Method 5: Remove Post Files

If you know the name of the package that is causing problems, you can delete the files manually. The installation files are usually located in the /var/lib/dpkg/info file.

Type in the following command and replace package_name with the name of the broken software.:

This will generate a list of all references to the software you installed.

You can then remove them by entering:

This command moves the files to the /tmp directory, where they cannot affect your package manager.

Next, update the package manager:

After which you can re-install the broken software again.

Method 6: Overwrite Package File

If you know the name of the package that is causing a problem, you can force an overwrite.

Use the following command and replace full_name_of_package with the actual package name:

Note: If you do not know the actual name of the package, you can search for it with the following command:

Replace package_name with the name of your software. This should return any instances of that package name. Note the exact filename, and type it into the previous command.

The dpkg error message indicates that there is a problem with the package installer, which is commonly caused by an interrupted installation process or a corrupted database.

By following these steps, you should now have several methods to fix the dpkg error message and attain a working package installer.

Источник

Please help! Sub-process /usr/bin/dpkg returned an error code (1) Installing MySQL on Ubuntu

I’m trying to install mysql with Ubuntu and I’ve spent the last 3 days purging MySQL and redownloading to no avail. Most of the solutions I found didn’t work for me, and they are all some variation of deleting MySQL and redownloading. Ive tried manually going into the files and manually deleting all MySQL related files too. Any help would be appreciated!

I’ve also tried reinstalling some dpkg files but as you can tell I’m pretty new to this.

This is my error log

Here is the result of mount | grep proc

$ sudo mount | grep proc proc on /proc type proc (rw,nosuid,nodev,noexec,noatime) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)

2 Answers 2

There can be Multiple Solutions for the Above

1. Reconfiguring the dpkg Package

One of the triggers of this error is a corrupted dpkg database. Can be fixed by sudo dpkg —configure -a

2. Force Install the Troublesome Package

Sometimes, errors can occur during the installation of software packages. When such happens, you can force install the package using the -f option as shown.

3. Purge the Bad or Corrupted Software Package

sudo apt remove —purge package_name

4. Remove all the Files Associated with the Package

Lastly, you can manually remove all the associated with the troublesome package. First, you need to find these files which are located in the /var/lib/dpkg/info directory.

sudo ls -l /var/lib/dpkg/info | grep -i package_name

After listing the files, you can move them to the /tmp directory.

sudo mv /var/lib/dpkg/info/package-name.* /tmp

Finally, update the package lists.

sudo apt update

And then try to reinstall your Package.

The Error You are getting is Mysql is unable to install coz port 3306 is already in use.

You could use netstat -lp | grep 3306 to find out what program is already listening on port 3306 (you should see PID/Program name in last column) and stop that (maybe mysql is already running?).

Источник

Today I tried to upgrade my Ubuntu 20.04 LTS desktop and I encountered with this error — «Sub-process /usr/bin/dpkg returned an error code (1)». It is one of the common issue in Ubuntu and other DEB-based systems.

This error usually happens due to a failed application installation, or if the dpkg package installer becomes corrupted or interrupted in mid-way while installing a package.

Here are the commands that I tried to upgrade my Ubuntu desktop:

$ sudo apt update
$ sudo apt upgrade

And… here is the error message:

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
  eog
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
21 not fully installed or removed.
Need to get 0 B/421 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] 
(Reading database ... 230012 files and directories currently installed.)
Preparing to unpack .../eog_3.36.2-0ubuntu1_amd64.deb ...
Unpacking eog (3.36.2-0ubuntu1) over (3.36.1-1) ...
dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt
dpkg-deb: error: <decompress> subprocess returned error exit status 2
dpkg: error processing archive /var/cache/apt/archives/eog_3.36.2-0ubuntu1_amd64.deb (--unpack):
 cannot copy extracted data for './usr/lib/x86_64-linux-gnu/eog/libeog.so' to '/usr/lib/x86_64-linux-gnu/eog/libeog.so.dpkg-new': unexpected end of file or stream
Errors were encountered while processing:
 /var/cache/apt/archives/eog_3.36.2-0ubuntu1_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Sub-process usr bin dpkg returned an error code 1
Sub-process usr bin dpkg returned an error code 1

Fix «Sub-process /usr/bin/dpkg returned an error code (1)» In Ubuntu

If you encountered with an error like above, worry not! Here, I have given a few workarounds to solve "Sub-process /usr/bin/dpkg returned an error code (1)" issue in Ubuntu and its variants such as Linux Mint, Pop OS.

Solution 1 — Reconfigure dpkg database

If the package installation process is stopped or interrupted in mid-way, the dpkg database might be corrupted. Reconfiguring dpkg database may solve this issue.

To reconfigure dpkg database, simply run:

$ sudo dpkg --configure -a

This command will try to fix the corrupted dpkg database and then reconfigure all broken packages. This command usually fixes the dpkg returned an error code (1) problem. If it didn’t solve the issue for any reason, follow the subsequent solutions.

Solution 2 — Force install the application

If the first method didn’t work, run the following command to perform force install:

$ sudo apt-get install -f

Or,

$ sudo apt-get install --fix-broken

Here, -f (or --fix-broken) option will attempt to correct the Ubuntu system with broken dependencies.

If these two solutions didn’t help and the issue still persists, try the next solution.

Solution 3 — Remove the problematic application .deb file from the local cache folder and reinstall it

As you see in the error message (the last two lines), the eog package is causing this error.

[...]
/var/cache/apt/archives/eog_3.36.2-0ubuntu1_amd64.deb 
E: Sub-process /usr/bin/dpkg returned an error code (1)

For those wondering, eog (short for Eye of GNOME) is the official and default image viewer for the GNOME desktop environment. So this package is problematic and doesn’t let me to upgrade my Ubuntu.

When you install a package, it will be downloaded and saved in the cache folder /var/cache/apt/archives/.

To fix this error, remove the cached package using command:

$ sudo rm /var/cache/apt/archives/eog_3.36.2-0ubuntu1_amd64.deb

Replace eog_3.36.2-0ubuntu1_amd64.deb with your package.

Clean the package cache folder:

$ sudo apt-get clean
$ sudo apt-get autoremove

Update the source lists:

$ sudo apt-get update

Upgrade your system:

$ sudo apt-get upgrade

Finally, get the fresh package from official repositories and reinstall it like below:

$ sudo apt-get install eog

This solution worked for me.

Solution 4 — Remove the problematic application

This should be your last resort. If none of the above methods help, remove the problematic package from your system like below:

$ sudo apt-get remove --purge eog
$ sudo apt-get clean && sudo apt-get autoremove

This command will remove eog with all its configuration files from the system.

And also find and remove all files associated with the broken package.

To find all files related to a package, run:

$ sudo ls -l /var/lib/dpkg/info | grep -i eog

Sample output:

-rw-r--r-- 1 root root 61926 Apr 24 13:42 eog.list
-rw-r--r-- 1 root root 5889 Mar 29 08:01 eog.md5sums

Remove them manually.

That’s it. At this stage, any one of the these four solutions should have helped you to fix «Sub-process /usr/bin/dpkg returned an error code (1)» in Ubuntu and other DEB-based systems.

In this MongoDB tutorial, I will explain how I managed to resolve the error “E: Sub-process /usr/bin/dpkg returned an error code (1)”.

  • Sub-process /usr/bin/dpkg returned an error code (1)
  • Reason: Sub-process /usr/bin/dpkg returned an error code (1)
  • Solution: Sub-process /usr/bin/dpkg returned an error code (1)
  • Conclusion

Recently, when I was trying to install the MongoDB database in the ubuntu operating system (20.04), I faced the error “Sub-process /usr/bin/dpkg returned an error code (1)“. You can see the error below:

Sub process dpkg returned an error code (1)
Sub-process /usr/bin/dpkg returned an error code (1)

I properly followed the correct command, but still faced this error.

Don’t worry if you don’t know how to resolve these issues. In the below steps, we will discuss the reason for getting the error and also resolve the error.

Reason: Sub-process /usr/bin/dpkg returned an error code (1)

When I searched it on the web, I found many posts and blogs on this error. Most of the blogs stated that this error was triggered because of a failed software installation or the installer becomes corrupted.

So if it is damaged and you are trying any new software installation will cause this error message.

Solution: Sub-process /usr/bin/dpkg returned an error code (1)

When I was trying to troubleshoot this error in the Ubuntu operating system. I found the solution for this.

The installer becomes corrupted that is the only reason we are getting errors. The key phrase in the error is /usr/bin/dpkg. Here, the dpkg is the package installer for Linux and it tracks software updates and dependencies.

Now, follow the below steps to fix the error dpkg returned an error code 1:

  • Open the terminal
  • Use the below code to move the dpkg info file into another file
sudo mv /var/lib/dpkg/info /var/lib/dpkg/info_silent

Here, we moved the info file into the info_silent file on the same path “/var/lib/dpkg/info_silent”. You can take any name for the new file (info_silent).

  • Now create a new directory info in dpkg folder, use the below command
sudo mkdir /var/lib/dpkg/info
  • Excute the update command to download package information from all configured sources
sudo apt-get update
dpkg returned an error code
Move directory and update packages
  • Excute the below command to check the dependencies of the packages you want and install any that are needed.
sudo apt-get -f install

Here, this command will install the MongoDB database and also check the dependencies that are needed to install.

Solution dpkg returned an error code (1)
Install MongoDB database
  • After installing all the dependencies move all the file of the info directory into info_silent directory.
sudo mv /var/lib/dpkg/info/* /var/lib/dpkg/info_silent
  • Remove the info directory, use the below command
sudo rm -rf /var/lib/dpkg/info
  • Now, again move all the file of the info_silent directory into the info directory.
sudo mv /var/lib/dpkg/info_silent /var/lib/dpkg/info
  • Use the below code to updates the list of available packages and their versions
sudo apt-get update
  • After updating the lists, the package manager knows about available updates for the software you have installed.
  • Use the upgrade command to installs newer versions of the packages you have.
sudo apt-get upgrade
Solution Sub-process dpkg returned an error code (1)
Some required changes in the dpkg directory
also, update and upgrade
  • Now we resolved the error and successfully installed the MongoDB without any error fall.
  • Check the version of MongoDB, use the below command
mongod --version
MongoDB dpkg returned an error code (1)
Installed MongoDB version v5.0.3

Conclusion

The “sub-process /usr/bin/dpkg returned an error code (1)” indicates that there is a problem with the package installer, which is generally caused by an interrupted installation process or a corrupted database.

You may also like to read the following MongoDB tutorials.

  • MongoDB shutting down with code 48
  • MongoDB two-phase commit
  • MongoDB Update Documents
  • Export MongoDB to CSV
  • MongoDB join two collections
  • Missing before statement MongoDB
  • MongoDB is not recognized as an internal or external command
  • Unable to locate package mongodb-org

Thus, you might have learned the cause and the solution of the error Sub-process /usr/bin/dpkg returned an error code (1).

  • Sub-process /usr/bin/dpkg returned an error code (1)
  • Reason: Sub-process /usr/bin/dpkg returned an error code (1)
  • Solution: Sub-process /usr/bin/dpkg returned an error code (1)
  • Conclusion

Bijay

I am Bijay having more than 15 years of experience in the Software Industry. During this time, I have worked on MariaDB and used it in a lot of projects. Most of our readers are from the United States, Canada, United Kingdom, Australia, New Zealand, etc.

Want to learn MariaDB? Check out all the articles and tutorials that I wrote on MariaDB. Also, I am a Microsoft MVP.

Понравилась статья? Поделить с друзьями:
  • Error strlen was not declared in this scope
  • Error strings dat file not found
  • Error string or binary data would be truncated the statement has been terminated
  • Error string index out of range java
  • Error string in namespace std does not name a type