Error unable to read askpass response from

[Solved] error: unable to read askpass response

I am trying to clone my project from GitHub But unfortunately, it is failing every time with the following error: unable to read askpass response in android studio. We are going to Learn about All Possible Solutions So Lets Get Start with This Article.

How error: unable to read askpass response Occurs?

I am trying to clone my project from GitHub But unfortunately, it is failing every time with the following error.

error: unable to read askpass response from ‘C:UserssscAppDataLocalGoogleAndroidStudio2021.1tmpintellij-git-askpass-local.sh’ bash: /dev/tty: No such device or address error: failed to execute prompt script (exit code 1) fatal: could not read Username

So here I am writing all the possible solutions that I have tried to resolve this error.

How To Solve error: unable to read askpass response?

1. How To Solve error: unable to read askpass response?

To Solve error: unable to read askpass response In my case, I just enable my Use Credential Helper from setting And My error was solved successfully. Here is a step-by-step guide to Use Credential Helper. First of all, open the Click File Menu of Android Studio. Select Settings ( Ctrl + Alt + S ). Now, In Setting, You can See Version Control. In Version Control You can See Git. Select Git. Bottom Of Version Control > Git You can see There is a Check Mark Box Use Credential Helper. Check Use Credential Helper. Appy setting OK and Now, Retry to Clone Your Project. Now, Your error must be solved. Thank You.
error: unable to read askpass response

To Solve error: unable to read askpass response In my case, I just enable my Use Credential Helper from setting And My error was solved successfully. Here is a step-by-step guide to Use Credential Helper. First of all, open the Click File Menu of Android Studio. Select Settings ( Ctrl + Alt + S ). Now, In Setting, You can See Version Control. In Version Control You can See Git. Select Git. Bottom Of Version Control > Git You can see There is a Check Mark Box Use Credential Helper. Check Use Credential Helper. Appy setting OK and Now, Retry to Clone Your Project. Now, Your error must be solved. Thank You.

Solution 1: enable Use Credential Helper

In my case, I just enable my Use Credential Helper from setting And My error was solved successfully. Here is a step-by-step guide to Use Credential Helper.

1. First of all, open the Click File Menu of Android Studio.
2. Select Settings ( Ctrl + Alt + S ).
3. Now, In Setting, You can See Version Control.
4. In Version Control You can See Git.
5. Select Git.
6. Bottom Of Version Control> Git You can see There is a Check Mark Box Use Credential Helper.
7. Check Use Credential Helper.
8. Appy setting OK and Now, Retry to Clone Your Project.
9. Now, Your error must be solved. Thank You.

Here is Guide Image For This Setting.

Summary

It’s all About this error. Hope We solved Your error. Comment below Your thoughts and your queries. Also, Comment below which solution worked for you?

Источник

Macos: Can’t assign requested address error: unable to read askpass response #12890

Describe the bug

I’m getting this error when I’m trying to fetch origin or push commits.

I have to reboot my mac, and it will get fixed. But suddenly after few days, I would again get this.

Version & OS

I’m on MacOS, Version 11.4 (20F71)
Github desktop version: Version 2.9.3 (x64)

Expected behavior

Should be able to fetch/push.

2021-09-02T06:28:32.593Z — info: [ui] [AppStore] loading 12 repositories from store
2021-09-02T06:28:32.594Z — info: [ui] [AppStore] found account: pkgodara (Pradeep Kumar)
2021-09-02T06:28:32.646Z — info: [ui] [BranchPruner] Last prune took place in an hour — skipping
2021-09-02T06:28:33.983Z — info: [ui] Executing getStatus: git —no-optional-locks status —untracked-files=all —branch —porcelain=2 -z (took 1.350s)
2021-09-02T06:28:34.732Z — info: [ui] launching: 2.9.3 (Mac OS 11.4.0)
2021-09-02T06:28:34.732Z — info: [ui] execPath: ‘/Applications/GitHub Desktop.app/Contents/Frameworks/GitHub Desktop Helper (Renderer).app/Contents/MacOS/GitHub Desktop Helper (Renderer)’
2021-09-02T06:28:39.034Z — info: [ui] [AppStore.withAuthenticatingUser] account found for repository: hidden-repo-name — pkgodara (has token)
2021-09-02T06:28:40.407Z — info: [ui] Executing push: git -c credential.helper= -c protocol.version=2 push origin UIC-486:UIC-486 —progress (took 1.319s)
2021-09-02T06:28:40.410Z — error: [ui] git -c credential.helper= -c protocol.version=2 push origin UIC-486:UIC-486 —progress exited with an unexpected code: 128.

The text was updated successfully, but these errors were encountered:

Источник

askpass, github errors on brew update #95

Few weeks ago I started seeing this message when running brew update :

Updates are still being fetched and I can run brew upgrade .

The text was updated successfully, but these errors were encountered:

What’s your shell? Are you running Homebrew inside a script or tmux or over SSH or anything? Thanks!

https://github.com/nviennot/homebrew-tmate does not seem to exist so there’s nothing to download.

I untapped the tmate repo and error stopped 😳

@diversario I’d still be interested in the answers to those questions. I’d like to investigate this further even if it’s not affecting you. Thanks!

Oh, sorry. I was about to answer that but then I deleted the tap and was, like, ¯_(ツ)_/¯

I was manually running brew update in a zsh under tmux . No SSH.

@diversario Thanks, that’ll hopefully help my reproduction; that error is not pleasant.

I’ve tried to reproduce this and failed unfortunately but will keep an eye out for more stuff like this; could be it’s already been fixed accidentally.

Based on the format of the error message, I suspect this is a problem with OP’s local git configuration.

The thing in the ‘. ‘ quotes there is the name of the program that git is calling to get a password. It’s set by credential.helper in git configs or by (I think) the environment variable GIT_ASKPASS . Looks like it was configured as if it were a boolean variable controlling whether a password is asked for. But since it’s actually a string value identifying a program, git is running the command false , which produces no output and exits nonzero.

I have been unable to reproduce this myself, but I haven’t spent too long fiddling with the config files.

If deleting that tap fixed it, I’ll bet it was either a local config setting in your cloned repo for that tap, or a GIT_ASKPASS env var that got set in one session and disappeared when you logged out.

Don’t think this is a Homebrew problem per se.

If this happens again, look at your git config settings (both global and for the repo it happened on) and your GIT_* environment variables.

Don’t think this is a Homebrew problem per se.

Have you seen this piece of code in update.sh ? 😉 It’s supposed to prevent that interactive password prompts appear during parallel fetch, which would make things very annoying when fetching a bigger number of taps … See also Homebrew/legacy-homebrew#48267.

I can reproduce the issue by simply doing the following:

This assumes that the GitHub HTTPS credentials are not in your keychain. As GitHub cannot answer whether a repository doesn’t exist or is just private, it asks for credentials. If I try to update that repository manually, I’m greeted with the usual prompt:

Have you seen this piece of code in update.sh?

Ha! I was grep -r ing through Library/Homebrew and failed to give it a -i` I guess. Sorry about that.

Okay, that makes sense now.

I wonder if there’s a way to serialize password prompting across the parallel git fetches using the credential helper so we can still prompt but not spew a bunch of warnings. I think I’ve run in to this before and simply not known what it was — though I use the osxkeychain helper, so I’d get spammed with dialogs instead of see spew in the terminal window.

Or maybe we could do a simple check to see if there are any (possibly) non-public repos (maybe with parallel HTTPS HEAD fetches, or just based on the standard official-repo regex pattern but allowing git/SSH transport), and then fall back to a serialized update like you suggested, of only the not-known-public ones?

Or maybe we could do a simple check to see if there are any (possibly) non-public repos (maybe with parallel HTTPS HEAD fetches, or just based on the standard official-repo regex pattern but allowing git/SSH transport), and then fall back to a serialized update like you suggested, of only the not-known-public ones?

I think that would create more damage than good. We nowadays keep a cache of whether a repository is private or not (see #67), but that’s not useful at all in finding out whether a prompt will be needed or not. And thanks to Git’s insteadOf URL rewriting support we can’t really rely on inspecting the URLs in the .git/config files to make a decent decision.

Have you seen this piece of code in update.sh? It’s supposed to prevent that interactive password prompts appear during parallel fetch, which would make things very annoying when fetching a bigger number of taps

I suspect this may either be Git-version dependent, just doesn’t work or I didn’t set it correctly.

I suspect this may either be Git-version dependent, just doesn’t work or I didn’t set it correctly.

My testing is based on the Apple-provided Git client (the one bundled with Xcode 7.3) as most users are likely to be using that (or the one from the CLTs, but that’s the same version). Quite possible its integration with the Keychain and other parts of the system differs subtly from the git Homebrew formula I suspect you are using by default.

I suspect this may either be Git-version dependent, just doesn’t work or I didn’t set it correctly.

I think it’s being slightly misused, or at least used in a nonintuitive way, since that variable takes a command name instead of a boolean value. But false is a command, and it causes this behavior. If this is intentional, might be worth putting an explanatory comment where it’s being set.

From my reading of the git doco, this isn’t version-dependent. I think we’ll need to set something else if you want to avoid printing out this warning. I don’t know what it is, but maybe something related to credential.helper instead of askpass-specific stuff. I suspect a lot of brew users (including myself) won’t see this because they’re using the osxkeychain credential helper instead of the askpass one.

But I think having a warning here, or at least some «skipped updating non-accessible tap repo foocorp/foo» progress message, is a good thing. Because it lets you know that part of the brew update command failed (or at least did something a user might not expect).

Источник

rstudio: error when pushing to github #104

When pushing commits within RStudio to github, getting this error:

The text was updated successfully, but these errors were encountered:

If you’re using the latest version of RStudio (eg version 0.98.501) on Mac or Linux, you’re probably getting this error when pushing commits within RStudio to github:

In the GUI, this looks like this:

There’s a problem with the latest https authentication using RStudio. This is not actually a problem with git or storing your username password, since the following works from Terminal:

So the solution to get RStudio to play nicely again is to switch the repository URL from https to ssh by editing the repository’s config. Since it’s in a hidden folder (prefixed with . ) and you may want to edit from terminal after ssh user@neptune.nceas.ucsb.edu , I recommend editing the file like so:

Then you’ll want to comment out the https and use the alternative ssh address that begins with git to look like:

Note that in the above example you’ll want to switch to out: bbest = [user] and ohicore = [repo] .

Apologies for the hassle, but it’s actually quick to fix. Then you’re back to being smooth operators (cue Sade 🎶 ).

PS I’ve logged this in the ohiprep/wiki/Using GitHub page, where I’ve also updated help on Resolving Conflicts .

Источник

rstudio: error when pushing to github #104

When pushing commits within RStudio to github, getting this error:

The text was updated successfully, but these errors were encountered:

If you’re using the latest version of RStudio (eg version 0.98.501) on Mac or Linux, you’re probably getting this error when pushing commits within RStudio to github:

In the GUI, this looks like this:

There’s a problem with the latest https authentication using RStudio. This is not actually a problem with git or storing your username password, since the following works from Terminal:

So the solution to get RStudio to play nicely again is to switch the repository URL from https to ssh by editing the repository’s config. Since it’s in a hidden folder (prefixed with . ) and you may want to edit from terminal after ssh user@neptune.nceas.ucsb.edu , I recommend editing the file like so:

Then you’ll want to comment out the https and use the alternative ssh address that begins with git to look like:

Note that in the above example you’ll want to switch to out: bbest = [user] and ohicore = [repo] .

Apologies for the hassle, but it’s actually quick to fix. Then you’re back to being smooth operators (cue Sade 🎶 ).

PS I’ve logged this in the ohiprep/wiki/Using GitHub page, where I’ve also updated help on Resolving Conflicts .

Источник

Об аутентификации

Чтобы обеспечить безопасность учетной записи, необходимо пройти проверку подлинности, прежде чем использовать GitHub Desktop для доступа к ресурсам в GitHub.

Перед проверкой подлинности выполните У вас уже должна быть учетная запись в GitHub.com.

• Дополнительные сведения о создании учетной записи в учетной записи GitHub.com см. в разделе Регистрация новой учетной записи GitHub.
• По вопросам, связанным с учетной записью GitHub Enterprise, обращайтесь к администратору сайта GitHub Enterprise.

Диагностика проблем с проверкой подлинности

Если GitHub Desktop столкнется с ошибкой проверки подлинности, для устранения неполадок можно использовать сообщения об ошибках.

При возникновении ошибки проверки подлинности сначала попробуйте выйти из учетной записи и снова войти в нее в GitHub Desktop.

Для некоторых ошибок GitHub Desktop отображает сообщение об ошибке. Если такого сообщения нет или вам нужны дополнительные сведения об ошибке, проверьте файлы журнала GitHub Desktop, выполнив следующие действия.

Просмотрите описанные ниже сведения об устранении неполадок в том сообщении об ошибке, которое вы найдете.

Недопустимые учетные данные

Error: Bad credentials

Эта ошибка означает, что возникла проблема с сохраненными учетными данными для учетной записи.

Чтобы устранить неполадки, выйдите из учетной записи в GitHub Desktop, а затем снова войдите в нее.

Пустой маркер

info: [ui] [AppStore.withAuthenticatingUser] account found for repository: node - USERNAME (empty token)

Эта ошибка означает, что GitHub Desktop не может найти маркер доступа, созданный в системной цепочке ключей.

Чтобы устранить неполадки, выйдите из учетной записи в GitHub Desktop, а затем снова войдите в нее.

Репозиторий не найден

fatal: repository 'https://github.com//.git' not found

(The error was parsed as 8: The repository does not seem to exist anymore. You may not have access, or it may have been deleted or renamed.)

Эта ошибка означает, что у вас нет разрешений на доступ к репозиторию, который вы пытаетесь клонировать.

Чтобы устранить неполадки, обратитесь к сотруднику организации, который управляет разрешениями.

Не удалось выполнить чтение из удаленного репозитория

git@github.com: Permission denied (publickey).
fatal: Could not read from remote repository.

Please make sure you have the correct access rights and the repository exists.

Эта ошибка означает, что у вас не настроен допустимый ключ SSH.

Сведения об устранении неполадок см. в статье Создание нового ключа SSH и его добавление в агент SSH.

Не удалось клонировать

fatal: clone of 'git@github.com:/' into submodule path '' failed
Failed to clone 'src/github.com//'. Retry scheduled
Cloning into ''...
git@github.com: Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.

Эта ошибка означает, что репозиторий, который вы пытаетесь клонировать, имеет вложенные модули, к которым у вас нет доступа, или у вас не настроен допустимый ключ SSH.

Если у вас нет доступа к вложенным модулям, для устранения неполадок свяжитесь с ответственным за управления разрешениями для репозитория.

Если у вас не настроен допустимый ключ SSH, воспользуйтесь статьей Создание нового ключа SSH и его добавление в агент SSH.

error: unable to read askpass response from '/Users//GitHub Desktop.app/Contents/Resources/app/static/ask-pass-trampoline.sh'
fatal: could not read Username for 'https://github.com': terminal prompts disabled

Дополнительные материалы

• Сведения о проверке подлинности в GitHub