Error unable to send filesystem payload

Error unable to send filesystem payload

Добрый день, дорогие коллеги и пользователи форума.
Прошу разобрать и поделиться опытом решения ошибки -1110, возникающей на 3uTools после процесса индексирования данных пользователя на устройстве. Данная проблема была обнаружена мной на iPhone 11 Pro и является не свойственной для него, так как данный телефон успешно восстанавливается с сохранением всех данных в принципе всегда (исключая случаи, когда пользователь повреждает данные, пытаясь обновить устройство через iTunes и рекавери мод).

Вводные данные:
3uTools 2.58 последняя версия.
2 разных ноутбука под управлением Windows 10 и Widnows 8.1
3 разных кабеля, два из них заведомо исправные с помощью которых было восстановлено данных примерно с 20 телефонов.
Разные порты.
Пользователь не пользовался iTunes перед обращением.
После неуспешной прошивки во всех случая устройство не сваливается на режим шнурка и продолжает пребывать с горящим яблоком и перезагрузкой раз в несколько минут.
Аккумулятор предварительно заряжен.
Скорее всего исключаю попадание влаги в устройство и в шлейф FaceID. Проблема возникла после того как перестали корректно работать ватцап и сбер из-за отсутстви свободного времени и пользователь принудительно перезагрузил телефон.
Прошивки использовались IOS 15.1 и IOS 15.2 (на разных ноутах, оба Lenovo)
Блок питания определяется корректно, ток — ок!

Материальной заинтересованности в решении данной проблемы нет, а вот её возникновение впервые за 2 месяца — беспокоит. Данные важны, очень важны, ситуация как всегда с переполненной памятью и всей жизнью в телефоне. Другой нижний шлейф не подкидывал ещё.
Случай интересный, участников его решения обязательно упомяну в статье на своём ресурсе и отблагодарю.
Прикладываю скриншот!

В коллекции error 1110 еще два аппарата: 11 Pro и 11 Pro Max. Также туда улетел 11 обычный, но после перезагрузки ожил с несколькими гигами места свободного.
Добавлю логов подробнее.
Жалуются на отсутствие места в логах..
log_11pro_1110_15.2rc.txt ( 172.49 КБ )

log_11promax_15.2beta5044b.txt ( 178.95 КБ )

Сообщение отредактировал rushouse34 — 17.12.21, 02:56

Источник

Error in restore.sh sending files interrupt in 7% #46

Sending filesystem now. [==== ] 7.0%ERROR: Unable to send data to ASR. Sent 0 of 1450 bytes.
ERROR: Unable to send filesystem payload
ERROR: Unable to send payload to ASR
ERROR: Unable to send filesystem
ERROR: Unable to successfully restore device
Got status message
Status: FailASR: __decompressChunk() error: 1000XSTA
ASR: fail
ASR: Could not restore — error 1000
ASR STATUS: fail
restore_apfs_image : failed to restore an APFS image, error = 14
[13:04:40.0806-GMT]<5>7> CHECKPOINT FAILURE:(FAILURE:14) APFS_RELOAD:[0x0C05] restore_invert [0]D(failed to restore APFS image)
restore-step-results = <0x11070C05:<0:14>>
restore-step-codes = <0x11070C05:<0:14>>
restore-step-domains = <0x11070C05:<0:»AMRestoreErrorDomain»>>
restore-step-error = <0x11070C05:»[0]D(failed to restore APFS image)»>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0810-GMT]<5>7> CHECKPOINT NOTICE: (NVRAM set) restore-step-user-progress=12 [sync=true] (first failure)
[13:04:40.0810-GMT]<5>7> CHECKPOINT FAILURE:(FAILURE:14) RESTORED:[0x064F] check_apfs_format [0]D(failed to restore APFS image)
restore-step-results = <0x1107064F:<0:14>;0x11070C05:<0:14>>
restore-step-codes = <0x1107064F:<0:14>;0x11070C05:<0:14>>
restore-step-domains = <0x1107064F:<0:»AMRestoreErrorDomain»>;0x11070C05:<0:»AMRestoreErrorDomain»>>
restore-step-error = <0x1107064F:»[0]D(failed to restore APFS image)»>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0814-GMT]<5>7> CHECKPOINT BEGIN: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = <0x1103064F:49;0x11030C05:54;0x11030647:55>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert;0x11030647:cleanup_check_result>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0817-GMT]<5>7> CHECKPOINT END: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = <0x1103064F:49;0x11030C05:54>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0819-GMT]<5>7> CHECKPOINT BEGIN: RESTORED:[0x0648] cleanup_send_final_status
restore-step-ids = <0x1103064F:49;0x11030C05:54;0x11030648:56>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert;0x11030648:cleanup_send_final_status>
restore-step-uptime = 139
restore-step-user-progress = 12

[Error] ERROR: Unable to restore device
Done: restoring failed.
Failed with errorcode=-11
[Log] Futurerestoring complete

**************** Downgrade complete! Enjoy 10.3.3 =) ****************
**************** Follow me on twitter @mosk_i for help/updates ******
leaders-Mac:1033-OTA-Downgrader-master leader$

The text was updated successfully, but these errors were encountered:

My device is iPad4,4

My ipad air has been downgraded successfully, ipad mini2 has the same problem as you.

@Leadereric Please try again with the latest version of the script

first i have tried the lasted version , but it seems to interrupt in command line16 or somthing，just keep showing waiting 10 seconds to put device in dfu mode,but actually my device has been in dfu even pwn mode，yet the command did not start the restore

I’ve never seen this issue before. Could you run everything again and send the full output?

© 2023 GitHub, Inc.

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

Welcome to 3uTools forum. Here you can find all information about iOS and 3uTools.

Iphone 7 — Unable to send data to ASR

Iphone 7 — Unable to send data to ASR

Post by smash59 » 29 Oct 2020 20:45

Re: Iphone 7 — Unable to send data to ASR

Post by claudioml » 05 Nov 2020 20:34

Re: Iphone 7 — Unable to send data to ASR

Post by tojaert » 07 Nov 2020 17:01

hello guys,
ASR (Apple System Restore) is a part of Ramdisk inside IPSW file (which you use to restore). This tool writings a root_fs files into actual system drive. Next step should be a Verify (checksum file approve).
Here are two examples: your is second one I guess. through mathematical combinatorics, I think the problem is with the coherence of the Nand device. To be sure, I would need to review your log entry for this operation.

keep safe, regards,
-tojaert

1. pass
[size=85]__text:00014204 LDR R3, =(off_235E8 — 0x1420A)
__text:00014206 ADD R3, PC
__text:00014208 LDR R3, [R3]
__text:0001420A LDR R3, [R3]
__text:0001420C CMP R3, #0
__text:0001420E BEQ loc_1427A
__text:00014210 LDR R0, =(aImagePassedSig — 0x14216)
__text:00014212 ADD R0, PC ; «Image passed signature verification»
__text:00014214 BLX _warnx
__text:00014218 B loc_1427A
[/size]
2. fail:
__text:0001421A
__text:0001421A loc_1421A ; CODE XREF: sub_13AB4+622�j
__text:0001421A ; sub_13AB4+628�j .
__text:0001421A LDR.W R0, =(aImageFailedSig — 0x14222)
__text:0001421E ADD R0, PC ; «Image failed signature verification»
__text:00014220 BLX _warnx
__text:00014224 MOVS R2, #0x50
__text:00014226 B loc_1426E

Источник

iPhone 8 will not «restore» or «Update»

I was trying to Update and back-up my iPhone 8 to my computer. Nothing unusual or fancy, just the simple procedure of connecting my perfectly good and functioning iPhone to the computer, starting iTunes and selecting «download and update». Everything was going fine and then it crashed part way though the iOS install! iTunes said some error message (error14 maybe?) and my iPhone has never started since. It just has the «support.apple.com/iphone/restore» words on top with a picture of a computer and a lightening cable pointing to it. I’ve tried EVERYTHING automated apple support recommends to fix this problem, watched MANY YouTube tutorial videos, I spent a long time with Apple support on the phone and I spent hours of research time looking online for answers. Nothing worked.

Is there any way to fix this or is my iPhone a brick for good? If its a hardware issue, what is most likely causing the problem? Is it a common thing for a simple update to cause hardware issues?

Errors I think I found in the log:

Received 234 bytes:

idevicerestore_common.c:printing 234 bytes plist:

Sending filesystem now.

### Asr Validating the filesystem. [20]

### Asr Validating the filesystem. [21]

### Asr Validating the filesystem. [21]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message.

### Asr Validating the filesystem. [22]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message.

ERROR: Unable to send data to ASR. Sent 0 of 20 bytes.

ERROR: Unable to send chunk checksum

ERROR: Unable to send payload to ASR

ERROR: Unable to send filesystem

ERROR: Unable to successfully restore device

ERROR: Unable to receive message from FDR 038FCBD0 (-4). 0/2 bytes

Источник

ERROR: Unable to restore device #65

I have a problem:

Sending filesystem now.
[========== ] 19.0%ERROR: Unable to send data to ASR. Sent 0 of 20 bytes.
ERROR: Unable to send chunk checksum
ERROR: Unable to send payload to ASR
ERROR: Unable to send filesystem
ERROR: Unable to successfully restore device
Got status message
Status: Fail
Log is available:
= 0x0
Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest _, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
AppleRGBOUT verify_swap failed
void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
AppleRGBOUT verify_swap failed
AppleS5L8920XBasebandSPIController::loadConfiguration: NCLK Frequency 48857142, Prescaler 3
BasebandSPIDevice::exitLowPower: Invalid state inactive
AppleSerialMultiplexer: adap::start: Frame size is 2048, Rx Buffer count is 16
AppleSerialMultiplexer: mux::start: created new mux (17) for spi-baseband with adapter BasebandSPIDevice
AppleSerialMultiplexer: debugparams::init: Parsed flags «» ( 0 )
AppleSerialMultiplexer: !! mux::setPowerStateGated: Skipping power state change
AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x82600000(0x8bf4e000)
AppleSamsungSerial: Identified Serial Port on ARM Device=uart2 at 0x82700000(0x8bf56000)
AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x82800000(0x8ca26000)
AppleSamsungSerial: Identified Serial Port on ARM Device=uart6 at 0x82b00000(0x8ca28000)
[HPark] AUD10::start: 0x800f6000, highland-park mIISNub: 0x91932080, sampleRate = 44100, ol=10, oi=12
AppleCS42L61Audio: could not allocate control 395
AppleARMBacklight::start: _minDACLevel=456 _maxDACLevel=1971
AppleMultitouchN1SPI: successfully started
AppleRGBOUT: TVOUT device is detected
ApplePinotLCD: _lcdPanelID: 0xa5970dc8 _lcdPanelClass: 2
IOReturn AppleMobileCLCD::set_ditherTable_state(bool), mIsCLCDDitherFor8Bits is true, no dynamic dither table.
[HPark] AUD10::start: 0x800f6000, highland-park mIICNub: 0x8fb5d540, mIISNub: 0x91932080, mSerialNub: 0x918fb400, sampleRate = 44100, ol=10, oi=12
AppleD1815PMUPowerSource: AppleUSBCableDetect 1
AppleD1815PMUPowerSource: AppleUSBCableType USBHost
[HPark] AUD10 ATSc values: [ mic1: 0x00000010, mic2: 0x000000f7, mic3: 0x00000000, recv: 0x00000000, spk: 0x00000000 ]
[HPark] AUD10::setPowerState() function called whereas Start() is not finished
AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don’t have device configuration yet
AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don’t have device configuration yet
AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0
IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)
IOSDIOIoCardDevice::parseFn0CISTuple(): Device manufacturer ID 0x2d0, Product ID 0x4329
IOSDIOIoCardDevice::parseFn0CISTuple(): Manufacturer: «»
IOSDIOIoCardDevice::parseFn0CISTuple(): Product: «»
IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo0: «s=B1»
IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo1: «P=N90 m=3.1 V=m»
AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-259 Jun 11 2014 20:13:01
AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:01
000060.775046 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: 5c:59:48:0f:50:44
IO80211Peer::addPhyStatistics Phy stats started for addr 00:be:ef:ff:ff:ff
IO80211Peer::addPhyStatistics Tx Completion stats started for addr 00:be:ef:ff:ff:ff
IO80211PeerManager::initWithInterface cant add monitoring timer
Started logging for intf
IO80211PeerManager::initWithInterface: inited peer manager
IO80211Interface::init peerManager=0x919db000
start:156
start:156
000060.778701 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x802fd000 (this 1, provider 0)
000060.778744 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don’t have device configuration yet
read new style signature 0x43313131 (line:389)
[FTL:MSG] VSVFL Register [OK]
[WMR:MSG] Metadata whitening is set in NAND signature
[FTL:MSG] VFL Init [OK]
display-scale = 2
display-rotation = 0
found applelogo at /usr/share/progressui/applelogo@2x.tga
[FTL:MSG] VFL_Open [OK]
[FTL:MSG] YAFTL Register [OK]
found display: primary
display: 640 x 960
found PTP interface
AppleSynopsysOTGDevice — Configuration: PTP
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice — Configuration: iPod USB Interface
AppleSynopsysOTGDevice Interface: USBAudioControl
AppleSynopsysOTGDevice Interface: USBAudioStreaming
AppleSynopsysOTGDevice Interface: IapOverUsbHid
AppleSynopsysOTGDevice — Configuration: PTP + Apple Mobile Device
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice — Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
AppleSynopsysOTGDevice Interface: PTP
AppleSynopsysOTGDevice Interface: AppleUSBMux
AppleSynopsysOTGDevice Interface: AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
IOAccessoryPortUSB::start
AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
init_waste
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
AppleSynopsysOTGDevice::startUSBStack Starting usb stack
IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[FTL:MSG] FTL_Open [OK]
[NAND] publishServices:642 FTL capabilities: 0x00000000
[nand_part_core:INF@ 157] published partition 0
[nand_part_core:INF@ 157] published partition 1
[nand_part_core:INF@ 157] published partition 2
[nand_part_core:INF@ 157] published partition 3
[nand_part_core:INF@ 157] published partition 5
[nand_part_core:INF@ 157] published partition 6
AppleSynopsysOTGDevice::stallBadSetupRequest request: a2 81 0100 0081 0003
AppleSynopsysOTGDevice::stallBadSetupRequest request: 21 0a 0000 0002 0000
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0101 0002 0006
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0102 0002 000a
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0103 0002 000e
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0104 0002 0012
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0105 0002 001a
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0106 0002 0032
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0107 0002 0060
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0108 0002 00c2
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0109 0002 0102
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010a 0002 0182
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010b 0002 0202
AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010c 0002 0300
[effaceable:INIT] found current generation, 49, in group 0
[effaceable:INIT] started
[effaceable:INIT] started
AppleUSBDeviceMux::handleConnectResult new session 0x93118630 established 62078 49152 62078 1
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x93118630
AppleARMBacklight::start: No AAP function
AppleUSBDeviceMux::handleConnectResult new session 0x93118630 established 62078 49153 62078 2
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
AppleUSBDeviceMux::handleConnectResult new session 0x93118580 established 62078 49155 62078 4
unrecognized request ‘GetValue’
AppleUSBDeviceMux::handleConnectResult new session 0x93118528 established 62078 49156 62078 5
unrecognized request ‘GetValue’
AppleUSBDeviceMux::handleConnectResult new session 0x931184d0 established 62078 49157 62078 6
unrecognized request ‘GetValue’
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
unrecognized request ‘GetValue’
AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x93118528 (62078 49156 62078 5)
AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x931184d0 (62078 49157 62078 6)
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 1082 failed: 61
client protocol version 13
** UUID 2628C4C3-EF38-166E-8676-9A3584C8313B ***
Restore options:
UUID =>
MinimumSystemPartition =>
SystemPartitionSize =>
PersonalizedDuringPreflight =>
SystemPartitionPadding => entries =>
2 : =
3 : =
4 : =
5 : =
8 : =
>

entering load_sep_os
device has no sep
entering partition_nand_device
device supports boot-from-NAND
nand device is already partitioned
entering wait_for_storage_device
Searching for NAND service
Found NAND service: IOFlashStoragePartition
NAND initialized. Waiting for devnode.
entering clear_remap_variable
executing /usr/sbin/nvram
entering format_effaceable_storage
effaceable storage is formatted, clearing it
effaceable storaged cleared
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
executing /sbin/fsck_hfs
volumeType is 0
0000: 0000 0000 0000 0000 0000 0000 0000 0000 |. |
. . .
01f0: 0000 0000 0000 0000 0000 0000 0000 0000 |. |
Offset 1024 length 512:
0000: 0000 0000 0000 0000 0000 0000 0000 0000 |. |
. . .
01f0: 0000 0000 0000 0000 0000 0000 0000 0000 |. |
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
fsck failed on /dev/disk0s1s1
skipping check for restore log due to old host software
entering clean_NAND
NAND format complete
entering ramrod_probe_media
find_filesystem_partitions: storage=/dev/disk0 system= data=
entering format_storage_for_LwVM
entering ramrod_probe_media
device partitioning scheme is GPT
unexpected partition ‘LwVM’ — skipping
find_filesystem_partitions: storage=/dev/disk0s1 system= data=
entering create_filesystem_partitions
User specified system partition size, skipping firmware extras size.
system partition padding size is: 167772160 bytes
unable to open : No such file or directory
creating 2 partitions
creating encrypted data partition
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
wipe entire partition: 1 (old = 0 new = 1691)
block size for /dev/disk0s1s1: 8192
/sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x93118580
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
block size for /dev/disk0s1s2: 8192
/sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
executing /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
AppleUSBDeviceMux::handleConnectResult new session 0x93118420 established 62078 49167 62078 16
unrecognized request ‘GetValue’
AppleUSBDeviceMux::handleConnectResult new session 0x931183c8 established 62078 49168 62078 17
unrecognized request ‘GetValue’
Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
executing /sbin/fsck_hfs
** /dev/rdisk0s1s2
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is Data
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s2 mounted on /mnt2
entering resize_system_partition_to_options
User specified system partition size, skipping firmware extras size.
Found SystemPartitionPadding value of 167772160 bytes
Erasing system partition prior to resize operation.
block size for /dev/disk0s1s1: 8192
/sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
executing /sbin/fsck_hfs
** /dev/rdisk0s1s1
Executing fsck_hfs (version hfs-277.10.5).
** Checking Journaled HFS Plus volume.
** Detected a case-sensitive volume.
The volume name is System
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** Trimming unused blocks.
** The volume System appears to be OK.
executing /sbin/mount_hfs
mount_hfs: Could not create property for re-key environment check: No such file or directory
/dev/disk0s1s1 mounted on /mnt1
Trying to resize system partition to 1773142016 bytes aka 1691 MB
entering adjust_partition_preflight
partition:0 requiredSize=216448
no change in size
Successfully resized the system partition
entering maximize_data_partition
entering adjust_partition_preflight
partition:1 requiredSize=2251799813685248
maximizing data partition to 14181990399 bytes
entering adjust_partition_preflight
partition:1 requiredSize=1731200
no change in size
Successfully resized data partition to consume free blocks
The system partition now has a total HFS+ capacity of 1691 MB
entering ramrod_probe_media
device partitioning scheme is GPT
find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
entering unmount_filesystems
entering ramrod_ticket_update
looking up root ticket hash
device tree ticket-hash:
ticket_hash: FB5459EEE0B6B50B60763F43325A6026C03AB71D
received valid ticket (2741 bytes)
entering restore_images
Successfully marked device node /dev/rdisk0s1s1 as static data
executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt —chunkchecksum —puppetstrings
void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
ASR: asr: Unable to disable idle sleep — -536870199
ASR STATUS: start 241.1 multicast-client
ASR: Waiting for connection attempt from server
AppleUSBDeviceMux::handleConnectResult new session 0x931180b0 established 12345 49170 12345 19
ASR STATUS: setup
ASR: Validating target. done
ASR STATUS: metadata
ASR: Validating source.
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x93118420
ASR: done
ASR: Retrieving scan information. done
ASR: Validating sizes. done
ASR STATUS: restore
unrecognized request ‘GetValue’
ASR RESTORE PROGRESS: 2%
ASR RESTORE PROGRESS: 4%
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x931183c8
ASR RESTORE PROGRESS: 6%
ASR RESTORE PROGRESS: 8%
ASR RESTORE PROGRESS: 10%
ASR RESTORE PROGRESS: 12%
ASR RESTORE PROGRESS: 14%
ASR RESTORE PROGRESS: 16%
ASR RESTORE PROGRESS: 18%
void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x931180b0
ASR: asr:
ASR: Socket unexpectedly closed while trying to read() offset 0xDBB466C
ASR: __decompressChunk: backing store read at offset 228366682 length 230024 failed with error 5
ASR: asr:
ASR: __decompressChunk() error: 5
ASR: Failed to read the stream
ASR: :
ASR: Input/output error
ASR: __decompressChunk: backing store read at offset 227641219 length 235574 failed with error 5
ASR: __decompressChunk: backing store read at offset 226029867 length 244217 failed with error 5
ASR: __decompressChunk: backing store read at offset 226727922 length 210638 failed with error 5
ASR: __decompressChunk() error: 5
ASR: __decompressChunk() error: 5
ASR: __decompressChunk() error: 5
ASR STATUS: fail
ASR: newfs_hfs: MarkExtentUsed::pread(9, 0x27d5a610, 8192, 4096): Invalid argument
ASR: /sbin/newfs_hfs failed with error 256
ASR: Could not restore — Input/output error
ASR STATUS: fail

ERROR: Unable to restore device

The text was updated successfully, but these errors were encountered:

Источник

Adblock
detector

I was trying to Update and back-up my iPhone 8 to my computer. Nothing unusual or fancy, just the simple procedure of connecting my perfectly good and functioning iPhone to the computer, starting iTunes and selecting «download and update». Everything was going fine and then it crashed part way though the iOS install! iTunes said some error message (error14 maybe?) and my iPhone has never started since. It just has the «support.apple.com/iphone/restore» words on top with a picture of a computer and a lightening cable pointing to it. I’ve tried EVERYTHING automated apple support recommends to fix this problem, watched MANY YouTube tutorial videos, I spent a long time with Apple support on the phone and I spent hours of research time looking online for answers. Nothing worked.

Is there any way to fix this or is my iPhone a brick for good? If its a hardware issue, what is most likely causing the problem? Is it a common thing for a simple update to cause hardware issues?

Errors I think I found in the log:

</dict>

</plist>

Received 234 bytes:

idevicerestore_common.c:printing 234 bytes plist:

<?xml version=»1.0″ encoding=»UTF-8″?>

<!DOCTYPE plist PUBLIC «-//Apple//DTD PLIST 1.0//EN» «http://www.apple.com/DTDs/PropertyList-1.0.dtd»>

<plist version=»1.0″>

<dict>

<key>Command</key>

<string>Payload</string>

</dict>

</plist>

Filesystem validated

Sending filesystem now…

### Asr Validating the filesystem…[20]

### Asr Validating the filesystem…[21]

### Asr Validating the filesystem…[21]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message…

### Asr Validating the filesystem…[22]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message…

ERROR: Unable to send data to ASR. Sent 0 of 20 bytes.

ERROR: Unable to send chunk checksum

ERROR: Unable to send payload to ASR

ERROR: Unable to send filesystem

ERROR: Unable to successfully restore device

ERROR: Unable to receive message from FDR 038FCBD0 (-4). 0/2 bytes

FDR 038FCBD0 terminating…

No data to read,err = -256,retry=1

ERROR: Unable to restore device

repair FAIL !err=-2

2014-01-01 16:35:30.595 [520:17bc]: restore library built Aug 8 2013 at 02:24:58
2014-01-01 16:35:30.595 [520:17bc]: iTunes: iTunes 11.1.3.8
2014-01-01 16:35:30.595 [520:17bc]: iTunes: Software payload version: 11B554a
2014-01-01 16:35:30.595 [520:17bc]: iTunes: Using MobileRestore state machine
[14:35:48,0435] Changing state from ‘Idle’ to ‘Restoring’
[14:35:48,0435] requested restore behavior: Erase
[14:35:48,0436] requested variant: Erase
[14:35:48,0438] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[14:35:48,0647] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[14:35:48,0648] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RestoreLogo» Digest = «<CFData 068CD3F8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0649] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RestoreDeviceTree» Digest = «<CFData 068CD248 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0649] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RestoreKernelCache» Digest = «<CFData 068CD320 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0650] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RestoreRamDisk» Digest = «<CFData 068CD560 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0651] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «iBEC» Digest = «<CFData 068CD3B0 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0652] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «iBSS» Digest = «<CFData 068CD290 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0652] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «KernelCache» Digest = «<CFData 068CD440 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0653] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «Diags» not part of manifest, skipping
[14:35:48,0653] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «CFELoader» not part of manifest, skipping
[14:35:48,0654] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «RBM» not part of manifest, skipping
[14:35:48,0655] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PHLEET» not part of manifest, skipping
[14:35:48,0655] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PERTOS» not part of manifest, skipping
[14:35:48,0656] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PEHammer» not part of manifest, skipping
[14:35:48,0656] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryLow1» Digest = «<CFData 068CD518 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0657] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryLow0» Digest = «<CFData 068CD5A8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0658] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «LLB» Digest = «<CFData 068CD2D8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0658] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «iBoot» Digest = «<CFData 068CD488 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0659] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «DeviceTree» Digest = «<CFData 05983240 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0660] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «SEP» Digest = «<CFData 05983288 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0661] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryCharging1» Digest = «<CFData 05983318 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0661] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RestoreSEP» Digest = «<CFData 05983360 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0662] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «AppleLogo» Digest = «<CFData 05983510 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0663] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryPlugin» Digest = «<CFData 059834C8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0664] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryFull» Digest = «<CFData 059833A8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0664] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «BatteryCharging0» Digest = «<CFData 059831B0 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0665] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing «RecoveryMode» Digest = «<CFData 059831F8 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}»
[14:35:48,0666] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 02AC98A0 [748B8078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[14:35:48,0667] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[14:35:48,0667] amai: AMAuthInstallDebugWriteObject: debug object written: C:UsersZAVAppDataLocalTempPer8CA6.tmpamaidebugtss-request.plist
[14:35:48,0945] amai: tss_submit_job: HttpQueryInfo returned 200
[14:35:49,0088] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[14:35:49,0088] amai: AMAuthInstallDebugWriteObject: debug object written: C:UsersZAVAppDataLocalTempPer8CA6.tmpamaidebugtss-response.plist
[14:35:49,0331] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «Diags»
[14:35:49,0332] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «CFELoader»
[14:35:49,0333] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «RBM»
[14:35:49,0334] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «PHLEET»
[14:35:49,0334] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «PERTOS»
[14:35:49,0335] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for «PEHammer»
[14:35:49,0446] iBoot build-version = iBoot-1940.3.5
[14:35:49,0447] iBoot build-style = RELEASE
[14:35:49,0447] requested restore behavior: Erase
[14:35:49,0449] requested restore behavior: Erase
[14:35:49,0451] unable to open device_map.txt: No such file or directory
[14:35:49,0452] found device map entry for 0x00008960 0x00000000. boardConfig=n51ap platform=s5l8960x
[14:35:49,0453] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[14:35:49,0453] AMDeviceIoControl: GetOverlappedResult failed
[14:35:49,0454] AMDeviceIoControl: pipe stall
[14:35:49,0454] USBControlTransfer: error 31, usbd status c0000004
[14:35:49,0455] command device request for ‘getenv radio-error’ failed: 2008
[14:35:49,0456] radio-error not set
[14:35:49,0456] unable to open device_map.txt: No such file or directory
[14:35:49,0457] <Recovery Mode Device 02ACDCB8>: production fused device
[14:35:49,0457] requested restore behavior: Erase
[14:35:49,0458] requested restore behavior: Erase
[14:35:49,0458] interface has 1 endpoints, file pipe = 1
[14:35:49,0458]
[14:35:49,0459] <Recovery Mode Device 02ACDCB8>: operation 4 progress -1
[14:35:49,0460] bootstrapping restore with iBEC
[14:35:49,0460] requested restore behavior: Erase
[14:35:49,0472] <Recovery Mode Device 02ACDCB8>: operation 31 progress -1
[14:35:50,0473] <Recovery Mode Device 02ACDCB8>: Recovery mode succeeded
[14:35:50,0477] Finished Recovery Restore Phase: Successful
[14:35:50,0540] Recovery mode device disconnected
[14:35:50,0541] Device removed when in state Restoring, moving device to transition state
[14:35:50,0541] Changing state from ‘Restoring’ to ‘Transitioning’
[14:35:50,0542] Creating timer to monitor transition
[14:35:52,0812] Recovery mode device connected
[14:35:52,0813] Transitioning device returned, continuing restore.
[14:35:52,0813] Canceling timer
[14:35:52,0814] Changing state from ‘Transitioning’ to ‘Restoring’
[14:35:52,0814] requested restore behavior: Erase
[14:35:52,0815] requested variant: Erase
[14:35:52,0815] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[14:35:53,0024] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[14:35:53,0024] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreLogo»
[14:35:53,0025] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreDeviceTree»
[14:35:53,0026] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreKernelCache»
[14:35:53,0026] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreRamDisk»
[14:35:53,0027] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBEC»
[14:35:53,0028] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBSS»
[14:35:53,0028] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «KernelCache»
[14:35:53,0029] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «Diags» not part of manifest, skipping
[14:35:53,0029] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «CFELoader» not part of manifest, skipping
[14:35:53,0030] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «RBM» not part of manifest, skipping
[14:35:53,0031] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PHLEET» not part of manifest, skipping
[14:35:53,0031] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PERTOS» not part of manifest, skipping
[14:35:53,0032] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PEHammer» not part of manifest, skipping
[14:35:53,0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryLow1»
[14:35:53,0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryLow0»
[14:35:53,0034] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «LLB»
[14:35:53,0035] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBoot»
[14:35:53,0035] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «DeviceTree»
[14:35:53,0036] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «SEP»
[14:35:53,0037] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryCharging1»
[14:35:53,0038] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreSEP»
[14:35:53,0038] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «AppleLogo»
[14:35:53,0039] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryPlugin»
[14:35:53,0039] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryFull»
[14:35:53,0040] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryCharging0»
[14:35:53,0041] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RecoveryMode»
[14:35:53,0041] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[14:35:53,0043] iBoot build-version = iBoot-1940.3.5
[14:35:53,0043] iBoot build-style = RELEASE
[14:35:53,0044] requested restore behavior: Erase
[14:35:53,0044] requested restore behavior: Erase
[14:35:53,0045] unable to open device_map.txt: No such file or directory
[14:35:53,0046] found device map entry for 0x00008960 0x00000000. boardConfig=n51ap platform=s5l8960x
[14:35:53,0046] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[14:35:53,0047] AMDeviceIoControl: GetOverlappedResult failed
[14:35:53,0047] AMDeviceIoControl: pipe stall
[14:35:53,0048] USBControlTransfer: error 31, usbd status c0000004
[14:35:53,0048] command device request for ‘getenv radio-error’ failed: 2008
[14:35:53,0049] radio-error not set
[14:35:53,0050] unable to open device_map.txt: No such file or directory
[14:35:53,0050] <Recovery Mode Device 05A20DA8>: production fused device
[14:35:53,0051] requested restore behavior: Erase
[14:35:53,0051] requested restore behavior: Erase
[14:35:53,0052] interface has 1 endpoints, file pipe = 1
[14:35:53,0052]
[14:35:53,0052] <Recovery Mode Device 05A20DA8>: operation 4 progress -1
[14:35:53,0053] unable to open device_map.txt: No such file or directory
[14:35:53,0054] found device map entry for 0x00008960 0x00000000. boardConfig=n51ap platform=s5l8960x
[14:35:53,0054] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[14:35:53,0055] requested restore behavior: Erase
[14:35:53,0056] requested restore behavior: Erase
[14:35:53,0056] <Recovery Mode Device 05A20DA8>: operation 42 progress -1
[14:35:53,0057] requested restore behavior: Erase
[14:35:54,0072] <Recovery Mode Device 05A20DA8>: operation 5 progress -1
[14:35:54,0312] unable to open device_map.txt: No such file or directory
[14:35:54,0313] found device map entry for 0x00008960 0x00000000. boardConfig=n51ap platform=s5l8960x
[14:35:54,0314] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[14:35:54,0314] AMDeviceIoControl: GetOverlappedResult failed
[14:35:54,0315] AMDeviceIoControl: pipe stall
[14:35:54,0315] USBControlTransfer: error 31, usbd status c0000004
[14:35:54,0316] command device request for ‘getenv ramdisk-delay’ failed: 2008
[14:35:55,0436] <Recovery Mode Device 05A20DA8>: operation 6 progress -1
[14:35:56,0459] <Recovery Mode Device 05A20DA8>: operation 7 progress -1
[14:35:56,0659] <Recovery Mode Device 05A20DA8>: operation 8 progress -1
[14:35:56,0660] unable to open device_map.txt: No such file or directory
[14:35:56,0660] found device map entry for 0x00008960 0x00000000. boardConfig=n51ap platform=s5l8960x
[14:35:56,0661] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[14:35:56,0661] <Recovery Mode Device 05A20DA8>: operation 9 progress -1
[14:35:56,0662] <Recovery Mode Device 05A20DA8>: Recovery mode succeeded
[14:35:56,0662] Finished Recovery Restore Phase: Successful
[14:35:57,0346] Recovery mode device disconnected
[14:35:57,0346] Device removed when in state Restoring, moving device to transition state
[14:35:57,0347] Changing state from ‘Restoring’ to ‘Transitioning’
[14:35:57,0349] Creating timer to monitor transition
[14:36:01,0788] RestoreOS mode device connected
[14:36:01,0788] Transitioning device returned, continuing restore.
[14:36:01,0789] Canceling timer
[14:36:01,0790] Changing state from ‘Transitioning’ to ‘Restoring’
[14:36:01,0794] <Restore Device 02AFFC08>: operation 44 progress -1
[14:36:01,0795] requested restore behavior: Erase
[14:36:01,0795] requested variant: Erase
[14:36:01,0797] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[14:36:02,0024] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[14:36:02,0025] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreLogo»
[14:36:02,0026] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreDeviceTree»
[14:36:02,0027] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreKernelCache»
[14:36:02,0027] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreRamDisk»
[14:36:02,0028] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBEC»
[14:36:02,0029] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBSS»
[14:36:02,0029] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «KernelCache»
[14:36:02,0030] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «Diags» not part of manifest, skipping
[14:36:02,0030] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «CFELoader» not part of manifest, skipping
[14:36:02,0031] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «RBM» not part of manifest, skipping
[14:36:02,0032] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PHLEET» not part of manifest, skipping
[14:36:02,0032] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PERTOS» not part of manifest, skipping
[14:36:02,0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry «PEHammer» not part of manifest, skipping
[14:36:02,0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryLow1»
[14:36:02,0034] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryLow0»
[14:36:02,0035] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «LLB»
[14:36:02,0035] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «iBoot»
[14:36:02,0036] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «DeviceTree»
[14:36:02,0036] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «SEP»
[14:36:02,0037] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryCharging1»
[14:36:02,0037] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RestoreSEP»
[14:36:02,0038] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «AppleLogo»
[14:36:02,0038] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryPlugin»
[14:36:02,0039] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryFull»
[14:36:02,0040] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «BatteryCharging0»
[14:36:02,0040] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing «RecoveryMode»
[14:36:02,0041] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[14:36:02,0041] requested restore behavior: Erase
[14:36:02,0042] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[14:36:02,0044] device did not return saved USB log
[14:36:02,0045] device had saved panic logs: panic(cpu 0 caller 0x<<<<<MEID>>>>>dc): «Timeout on ART_LOAD»

3. About to send filesystem…

4. usbmuxd_connect: Connect failed, Error code=3

5. Connected to ASR

6. Validating the filesystem

7. Filesystem validated

8. Sending filesystem now…

9. usbmuxd_send: Error -1 when sending: Connection reset by peer

10. ERROR: Unable to send data to ASR. Sent 0 of 1450 bytes.

11. ERROR: Unable to send filesystem payload

12. ERROR: Unable to send payload to ASR

13. ERROR: Unable to send filesystem

14. ERROR: Unable to successfully restore device

15. Got status message

16. Status: Fail

17. Log is available:

18. enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0

19. Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0

20. virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip

21. Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0

22. Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0

23. Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0

24. Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0

25. metadata-whitening was found and it’s set to 1

26. default-ftl-version was found and it’s set to 1

27. diag-bits is supplied by AppleNANDFTL

28. [FTL:MSG] Apple NAND Driver (AND) RW

29. [FTL:MSG] FIL_Init [OK]

30. [FTL:MSG] BUF_Init [OK]

31. [FTL:MSG] FPart Init [OK]

32. AppleH4CamIn::start — back camera expected

33. AppleH4CamIn::start — front camera expected

34. AppleH4CamIn::power_off_hardware

35. AppleH4CamIn::setPowerStateGated: 0

36. AppleRGBOUT: TVOUT device is detected

37. virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip

38. void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.

39. com.apple.AppleFSCompressionTypeZlib load succeeded

40. AppleMultitouchZ2SPI: successfully started

41. virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 1 pendingSwap: 0x0 fController: 0 -> 1

42. bool AppleRGBOUT::power_up_hardware()

43. L2TP domain init

44. L2TP domain init complete

45. virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 pendingSwap: 0x0 fController: 1 -> 0

46. bool AppleRGBOUT::power_down_hardware()

47. PPTP domain init

48. AppleCS42L63Audio: could not allocate control 395

49. bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT

50. virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 1 pendingSwap: 0x0 fController: 0 -> 1

51. bool AppleRGBOUT::power_up_hardware()

52. virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 pendingSwap: 0x0 fController: 1 -> 0

53. bool AppleRGBOUT::power_down_hardware()

54. bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT

55. AppleD1946PMUPowerSource: AppleUSBCableDetect 1

56. AppleD1946PMUPowerSource: AppleUSBCableType USBHost

57. AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don’t have device configuration yet

58. AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don’t have device configuration yet

59. AppleMultitouchZ2SPI: detected HBPP. driver will be kept alive

60. read new style signature 0x43313141 (line:389)

61. [FTL:MSG] VSVFL Register [OK]

62. [WMR:MSG] Metadata whitening is set in NAND signature

63. [FTL:MSG] VFL Init [OK]

64. [FTL:MSG] VFL_Open [OK]

65. [FTL:MSG] YAFTL Register [OK]

66. display-scale = 1

67. display-rotation = 90

68. found applelogo at /usr/share/progressui/applelogo~ipad.tga

69. [FTL:MSG] FTL_Open [OK]

70. [NAND] _publishServices:642 FTL capabilities: 0x00000000

71. found display: primary

72. display: 1024 x 768

73. found PTP interface

74. waiting for matching IOKit service: <CFBasicHash 0x14e34540 [0x300ae0]>{type = mutable dict, count = 2,

75. entries =>

76. 0 : <CFString 0xf3718 [0x300ae0]>{contents = «IOPropertyMatch»} = <CFBasicHash 0x14e33f90 [0x300ae0]>{type = mutable dict, count = 1,

77. entries =>

78. 0 : <CFString 0xf3a58 [0x300ae0]>{contents = «USBDeviceFunction»} = <CFString 0xf3a48 [0x300ae0]>{contents = «PTP»}

79. }

81. 2 : <CFString 0x458e60 [0x300ae0]>{contents = «IOProviderClass»} = <CFString 0x14e34ce0 [0x300ae0]>{contents = «IOUSBDeviceInterface»}

82. }

84. [nand_part_core:INF@ 157] published partition 0

85. [nand_part_core:INF@ 157] published partition 1

86. [nand_part_core:INF@ 157] published partition 2

87. [nand_part_core:INF@ 157] published partition 3

88. [nand_part_core:INF@ 157] published partition 5

89. [nand_part_core:INF@ 157] published partition 6

90. AppleSynopsysOTGDevice — Configuration: PTP

91. AppleSynopsysOTGDevice Interface: PTP

92. AppleSynopsysOTGDevice — Configuration: iPod USB Interface

93. AppleSynopsysOTGDevice Interface: USBAudioControl

94. AppleSynopsysOTGDevice Interface: USBAudioStreaming

95. AppleSynopsysOTGDevice Interface: IapOverUsbHid

96. AppleSynopsysOTGDevice — Configuration: PTP + Apple Mobile Device

97. AppleSynopsysOTGDevice Interface: PTP

98. AppleSynopsysOTGDevice Interface: AppleUSBMux

99. AppleSynopsysOTGDevice — Configuration: PTP + Apple Mobile Device + Apple USB Ethernet

100. AppleSynopsysOTGDevice Interface: PTP

101. AppleSynopsysOTGDevice Interface: AppleUSBMux

102. AppleSynopsysOTGDevice Interface: AppleUSBEthernet

103. AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl

104. AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming

105. IOAccessoryPortUSB::start

106. virtual bool AppleUSBDeviceMux::start(IOService *) build: Feb 28 2014 17:26:28

107. init_waste

108. AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet

109. AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid

110. AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux

111. IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0

112. IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)

113. IOSDIOIoCardDevice::parseFn0CISTuple(): Device manufacturer ID 0x2d0, Product ID 0x4329

114. IOSDIOIoCardDevice::parseFn0CISTuple(): Manufacturer: «»

115. IOSDIOIoCardDevice::parseFn0CISTuple(): Product: «»

116. IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo0: «s=C0»

117. IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo1: «P=K94 m=1.0 V=a»

118. AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-258 Feb 28 2014 17:28:01

119. AppleBCMWLANCore::init(): IO80211-46 Feb 28 2014 17:24:28

120. 000186.571983 wlan.A[0] AppleBCMWLANProvisioningManager::parseApplePrivateCIS(): 0 — Error! Serial number 0x0c needed 6 bytes, but got 17 byte.

121. 000186.575880 wlan.N[1] AppleBCMWLANCore::start(): Starting with MAC Address: b8:c7:5d:f3:e1:fc

122. 000186.576180 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0x80502000 (this 1, provider 0)

123. 000186.576210 wlan.N[3] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring

124. IO80211Peer::addPhyStatistics Phy stats started for addr 00:be:ef:ff:ff:ff

125. IO80211Peer::addPhyStatistics Tx Completion stats started for addr 00:be:ef:ff:ff:ff

126. IO80211PeerManager::initWithInterface cant add monitoring timer

127. Started logging for intf

128. IO80211PeerManager::initWithInterface: inited peer manager

129. IO80211Interface::init peerManager=0xa38d9800

130. start:156

131. start:156

132. AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but not all interface drivers have registered yet

133. [effaceable:INIT] found current generation, 101, in group 0

134. [effaceable:INIT] started

135. [effaceable:INIT] started

136. AppleARMBacklight::start: No AAP function

137. AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but not all interface drivers have registered yet

138. AppleSynopsysOTGDevice::gated_registerFunction Register function PTP

139. AppleSynopsysOTGDevice::startUSBStack Starting usb stack

140. IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7

141. AppleSynopsysOTGDevice::stallBadSetupRequest request: a2 81 0100 0081 0003

142. AppleSynopsysOTGDevice::stallBadSetupRequest request: 21 0a 0000 0002 0000

143. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0101 0002 0006

144. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0102 0002 000a

145. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0103 0002 000e

146. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0104 0002 0012

147. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0105 0002 001a

148. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0106 0002 0032

149. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0107 0002 0060

150. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0108 0002 00c2

151. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 0109 0002 0102

152. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010a 0002 0182

153. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010b 0002 0202

154. AppleSynopsysOTGDevice::stallBadSetupRequest request: a1 01 010c 0002 0300

155. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95e70 established 62078<-lo0->49152 62078<-usb->1

156. void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa3b95e70

157. recv(13, 4) failed: connection closed

158. unable to read message size: -1

159. could not receive message

160. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95e70 established 62078<-lo0->49153 62078<-usb->2

161. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95e18 established 62078<-lo0->49154 62078<-usb->3

162. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95dc0 established 62078<-lo0->49155 62078<-usb->4

163. unrecognized request ‘GetValue’

164. void AppleUSBDeviceMux::sendMuxSegment(struct BulkUSBMuxSession *) connection was closed (0xa3b95e18)

165. unrecognized request ‘ValidatePair’

166. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95e18 established 62078<-lo0->49156 62078<-usb->5

167. unrecognized request ‘ValidatePair’

168. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95d68 established 62078<-lo0->49157 62078<-usb->6

169. client protocol version 13

170. *** UUID DC60EFD2-F075-2056-968A-87D8D242CA8F ***

171. Restore options:

172. UUID => <CFString 0x14e36ee0 [0x300ae0]>{contents = «DC60EFD2-F075-2056-968A-87D8D242CA8F»}

173. MinimumSystemPartition => <CFNumber 0x14e36e30 [0x300ae0]>{value = +1419, type = kCFNumberSInt64Type}

174. SystemPartitionSize => <CFNumber 0x14e369c0 [0x300ae0]>{value = +1419, type = kCFNumberSInt64Type}

175. PersonalizedDuringPreflight => <CFBoolean 0x300e90 [0x300ae0]>{value = true}

176. SystemPartitionPadding => <CFBasicHash 0x14e36c20 [0x300ae0]>{type = mutable dict, count = 5,

177. entries =>

178. 2 : <CFString 0x14e36e60 [0x300ae0]>{contents = «128»} = <CFNumber 0x14e36e90 [0x300ae0]>{value = +1280, type = kCFNumberSInt64Type}

179. 3 : <CFString 0x14e36c50 [0x300ae0]>{contents = «16»} = <CFNumber 0x14e36610 [0x300ae0]>{value = +160, type = kCFNumberSInt64Type}

180. 4 : <CFString 0x14e36620 [0x300ae0]>{contents = «32»} = <CFNumber 0x14e36550 [0x300ae0]>{value = +320, type = kCFNumberSInt64Type}

181. 5 : <CFString 0x14e36450 [0x300ae0]>{contents = «8»} = <CFNumber 0x14e36b10 [0x300ae0]>{value = +80, type = kCFNumberSInt64Type}

182. 8 : <CFString 0x14e36500 [0x300ae0]>{contents = «64»} = <CFNumber 0x14e36440 [0x300ae0]>{value = +640, type = kCFNumberSInt64Type}

183. }

185. entering load_sep_os

186. device has no sep

187. entering partition_nand_device

188. device supports boot-from-NAND

189. nand device is already partitioned

190. entering wait_for_storage_device

191. Searching for NAND service

192. Found NAND service: IOFlashStoragePartition

193. NAND initialized. Waiting for devnode.

194. entering clear_remap_variable

195. executing /usr/sbin/nvram

196. entering format_effaceable_storage

197. effaceable storage is formatted, clearing it

198. effaceable storaged cleared

199. entering ramrod_probe_media

200. device partitioning scheme is GPT

201. find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2

202. executing /sbin/fsck_hfs

203. volumeType is 0

204. 0000: 0000 0000 0000 0000 0000 0000 0000 0000 |…………….|

205. . . .

206. 01f0: 0000 0000 0000 0000 0000 0000 0000 0000 |…………….|

207. Offset 1024 length 512:

208. 0000: 0000 0000 0000 0000 0000 0000 0000 0000 |…………….|

209. . . .

210. 01f0: 0000 0000 0000 0000 0000 0000 0000 0000 |…………….|

211. ** /dev/rdisk0s1s1

212. Executing fsck_hfs (version hfs-277.10.5).

213. fsck failed on /dev/disk0s1s1

214. skipping check for restore log due to old host software

215. entering clean_NAND

216. NAND format complete

217. entering ramrod_probe_media

218. find_filesystem_partitions: storage=/dev/disk0 system= data=

219. entering format_storage_for_LwVM

220. entering ramrod_probe_media

221. device partitioning scheme is GPT

222. unexpected partition ‘LwVM’ — skipping

223. find_filesystem_partitions: storage=/dev/disk0s1 system= data=

224. entering create_filesystem_partitions

225. User specified system partition size, skipping firmware extras size.

226. system partition padding size is: 167772160 bytes

227. unable to open : No such file or directory

228. creating 2 partitions

229. creating encrypted data partition

230. entering ramrod_probe_media

231. device partitioning scheme is GPT

232. find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2

233. wipe entire partition: 1 (old = 0 new = 1579)

234. block size for /dev/disk0s1s1: 8192

235. /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1

236. executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1

237. Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal

238. block size for /dev/disk0s1s2: 8192

239. /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2

240. executing /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2

241. Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal

242. entering ramrod_probe_media

243. device partitioning scheme is GPT

244. find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2

245. entering mount_filesystems

246. executing /sbin/fsck_hfs

247. ** /dev/rdisk0s1s1

248. Executing fsck_hfs (version hfs-277.10.5).

249. ** Checking Journaled HFS Plus volume.

250. ** Detected a case-sensitive volume.

251. The volume name is System

252. ** Checking extents overflow file.

253. ** Checking catalog file.

254. ** Checking multi-linked files.

255. ** Checking catalog hierarchy.

256. ** Checking extended attributes file.

257. ** Checking volume bitmap.

258. ** Checking volume information.

259. ** Trimming unused blocks.

260. ** The volume System appears to be OK.

261. executing /sbin/mount_hfs

262. mount_hfs: Could not create property for re-key environment check: No such file or directory

263. /dev/disk0s1s1 mounted on /mnt1

264. executing /sbin/fsck_hfs

265. ** /dev/rdisk0s1s2

266. Executing fsck_hfs (version hfs-277.10.5).

267. ** Checking Journaled HFS Plus volume.

268. ** Detected a case-sensitive volume.

269. The volume name is Data

270. ** Checking extents overflow file.

271. ** Checking catalog file.

272. ** Checking multi-linked files.

273. ** Checking catalog hierarchy.

274. ** Checking extended attributes file.

275. ** Checking volume bitmap.

276. ** Checking volume information.

277. ** Trimming unused blocks.

278. ** The volume Data appears to be OK.

279. executing /sbin/mount_hfs

280. mount_hfs: Could not create property for re-key environment check: No such file or directory

281. /dev/disk0s1s2 mounted on /mnt2

282. entering resize_system_partition_to_options

283. User specified system partition size, skipping firmware extras size.

284. Found SystemPartitionPadding value of 167772160 bytes

285. Erasing system partition prior to resize operation.

286. block size for /dev/disk0s1s1: 8192

287. /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1

288. executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1

289. unrecognized request ‘GetValue’

290. void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa3b95dc0

291. recv(14, 4) failed: connection closed

292. unable to read message size: -1

293. could not receive message

294. Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal

295. executing /sbin/fsck_hfs

296. void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa3b95e18

297. recv(13, 4) failed: connection closed

298. unable to read message size: -1

299. could not receive message

300. ** /dev/rdisk0s1s1

301. Executing fsck_hfs (version hfs-277.10.5).

302. ** Checking Journaled HFS Plus volume.

303. ** Detected a case-sensitive volume.

304. The volume name is System

305. ** Checking extents overflow file.

306. ** Checking catalog file.

307. ** Checking multi-linked files.

308. ** Checking catalog hierarchy.

309. ** Checking extended attributes file.

310. ** Checking volume bitmap.

311. ** Checking volume information.

312. ** Trimming unused blocks.

313. ** The volume System appears to be OK.

314. executing /sbin/mount_hfs

315. mount_hfs: Could not create property for re-key environment check: No such file or directory

316. /dev/disk0s1s1 mounted on /mnt1

317. Trying to resize system partition to 1655701504 bytes aka 1579 MB

318. entering adjust_partition_preflight

319. partition:0 requiredSize=202112

320. no change in size

321. Successfully resized the system partition

322. entering maximize_data_partition

323. entering adjust_partition_preflight

324. partition:1 requiredSize=2251799813685248

325. maximizing data partition to 14299430911 bytes

326. entering adjust_partition_preflight

327. partition:1 requiredSize=1745536

328. no change in size

329. Successfully resized data partition to consume free blocks

330. The system partition now has a total HFS+ capacity of 1579 MB

331. entering ramrod_probe_media

332. device partitioning scheme is GPT

333. find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2

334. entering unmount_filesystems

335. entering ramrod_ticket_update

336. looking up root ticket hash

337. device tree ticket-hash: <CFData 0x14d3d950 [0x300ae0]>{length = 20, capacity = 20, bytes = 0x315dd7a02a674766c994386ad62a59748f567c36}

338. ticket_hash: 315DD7A02A674766C994386AD62A59748F567C36

339. received valid ticket (2741 bytes)

340. entering restore_images

341. Successfully marked device node /dev/rdisk0s1s1 as static data

342. executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt —chunkchecksum —puppetstrings

343. void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61

344. ASR: asr: Unable to disable idle sleep — -536870199

345. ASR STATUS: start 241.1 multicast-client

346. ASR: Waiting for connection attempt from server

347. AppleUSBDeviceMux::handleConnectResult new session 0xa3b95dc0 established 12345<-lo0->49159 12345<-usb->8

348. ASR STATUS: setup

349. ASR: Validating target…

350. ASR: done

351. ASR STATUS: metadata

352. ASR: Validating source…

353. ASR: done

354. ASR: Retrieving scan information…

355. ASR: done

356. ASR: Validating sizes…

357. ASR: done

358. ASR STATUS: restore

359. void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0xa3b95dc0

360. ASR: asr:

361. ASR: Socket unexpectedly closed while trying to read() offset 0x239C30

362. ASR: asr: Failed to read the stream

363. ASR: :

364. ASR: Input/output error

365. ASR: __decompressChunk: backing store read at offset 511256 length 37002 failed with error 5

366. ASR: __decompressChunk() error: 5

367. ASR STATUS: fail

368. ASR: newfs_hfs:

369. ASR: MarkExtentUsed::pread(12, 0x27de8610, 8192, 4096):

370. ASR: Invalid argument

371. ASR: /sbin/newfs_hfs failed with error 256

372. ASR: Could not restore — Input/output error

373. ASR STATUS: fail

375. ERROR: Unable to restore device

Error unable to send filesystem payload

Добрый день, дорогие коллеги и пользователи форума.
Прошу разобрать и поделиться опытом решения ошибки -1110, возникающей на 3uTools после процесса индексирования данных пользователя на устройстве. Данная проблема была обнаружена мной на iPhone 11 Pro и является не свойственной для него, так как данный телефон успешно восстанавливается с сохранением всех данных в принципе всегда (исключая случаи, когда пользователь повреждает данные, пытаясь обновить устройство через iTunes и рекавери мод).

Вводные данные:
3uTools 2.58 последняя версия.
2 разных ноутбука под управлением Windows 10 и Widnows 8.1
3 разных кабеля, два из них заведомо исправные с помощью которых было восстановлено данных примерно с 20 телефонов.
Разные порты.
Пользователь не пользовался iTunes перед обращением.
После неуспешной прошивки во всех случая устройство не сваливается на режим шнурка и продолжает пребывать с горящим яблоком и перезагрузкой раз в несколько минут.
Аккумулятор предварительно заряжен.
Скорее всего исключаю попадание влаги в устройство и в шлейф FaceID. Проблема возникла после того как перестали корректно работать ватцап и сбер из-за отсутстви свободного времени и пользователь принудительно перезагрузил телефон.
Прошивки использовались IOS 15.1 и IOS 15.2 (на разных ноутах, оба Lenovo)
Блок питания определяется корректно, ток — ок!

Материальной заинтересованности в решении данной проблемы нет, а вот её возникновение впервые за 2 месяца — беспокоит. Данные важны, очень важны, ситуация как всегда с переполненной памятью и всей жизнью в телефоне. Другой нижний шлейф не подкидывал ещё.
Случай интересный, участников его решения обязательно упомяну в статье на своём ресурсе и отблагодарю.
Прикладываю скриншот!

В коллекции error 1110 еще два аппарата: 11 Pro и 11 Pro Max. Также туда улетел 11 обычный, но после перезагрузки ожил с несколькими гигами места свободного.
Добавлю логов подробнее.
Жалуются на отсутствие места в логах..
log_11pro_1110_15.2rc.txt ( 172.49 КБ )

log_11promax_15.2beta5044b.txt ( 178.95 КБ )

Сообщение отредактировал rushouse34 — 17.12.21, 02:56

Источник

iPhone 8 will not «restore» or «Update»

I was trying to Update and back-up my iPhone 8 to my computer. Nothing unusual or fancy, just the simple procedure of connecting my perfectly good and functioning iPhone to the computer, starting iTunes and selecting «download and update». Everything was going fine and then it crashed part way though the iOS install! iTunes said some error message (error14 maybe?) and my iPhone has never started since. It just has the «support.apple.com/iphone/restore» words on top with a picture of a computer and a lightening cable pointing to it. I’ve tried EVERYTHING automated apple support recommends to fix this problem, watched MANY YouTube tutorial videos, I spent a long time with Apple support on the phone and I spent hours of research time looking online for answers. Nothing worked.

Is there any way to fix this or is my iPhone a brick for good? If its a hardware issue, what is most likely causing the problem? Is it a common thing for a simple update to cause hardware issues?

Errors I think I found in the log:

Received 234 bytes:

idevicerestore_common.c:printing 234 bytes plist:

Sending filesystem now.

### Asr Validating the filesystem. [20]

### Asr Validating the filesystem. [21]

### Asr Validating the filesystem. [21]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message.

### Asr Validating the filesystem. [22]

FDR 038FCBD0 timeout waiting for command

FDR 038FCBD0 waiting for message.

ERROR: Unable to send data to ASR. Sent 0 of 20 bytes.

ERROR: Unable to send chunk checksum

ERROR: Unable to send payload to ASR

ERROR: Unable to send filesystem

ERROR: Unable to successfully restore device

ERROR: Unable to receive message from FDR 038FCBD0 (-4). 0/2 bytes

Источник

3uTools-Forum

Welcome to 3uTools forum. Here you can find all information about iOS and 3uTools.

Iphone 7 — Unable to send data to ASR

Iphone 7 — Unable to send data to ASR

Post by smash59 » 29 Oct 2020 20:45

Re: Iphone 7 — Unable to send data to ASR

Post by claudioml » 05 Nov 2020 20:34

Re: Iphone 7 — Unable to send data to ASR

Post by tojaert » 07 Nov 2020 17:01

hello guys,
ASR (Apple System Restore) is a part of Ramdisk inside IPSW file (which you use to restore). This tool writings a root_fs files into actual system drive. Next step should be a Verify (checksum file approve).
Here are two examples: your is second one I guess. through mathematical combinatorics, I think the problem is with the coherence of the Nand device. To be sure, I would need to review your log entry for this operation.

keep safe, regards,
-tojaert

1. pass
[size=85]__text:00014204 LDR R3, =(off_235E8 — 0x1420A)
__text:00014206 ADD R3, PC
__text:00014208 LDR R3, [R3]
__text:0001420A LDR R3, [R3]
__text:0001420C CMP R3, #0
__text:0001420E BEQ loc_1427A
__text:00014210 LDR R0, =(aImagePassedSig — 0x14216)
__text:00014212 ADD R0, PC ; «Image passed signature verification»
__text:00014214 BLX _warnx
__text:00014218 B loc_1427A
[/size]
2. fail:
__text:0001421A
__text:0001421A loc_1421A ; CODE XREF: sub_13AB4+622�j
__text:0001421A ; sub_13AB4+628�j .
__text:0001421A LDR.W R0, =(aImageFailedSig — 0x14222)
__text:0001421E ADD R0, PC ; «Image failed signature verification»
__text:00014220 BLX _warnx
__text:00014224 MOVS R2, #0x50
__text:00014226 B loc_1426E

Источник

Error in restore.sh sending files interrupt in 7% #46

Comments

Leadereric commented Oct 29, 2019

Sending filesystem now. [==== ] 7.0%ERROR: Unable to send data to ASR. Sent 0 of 1450 bytes.
ERROR: Unable to send filesystem payload
ERROR: Unable to send payload to ASR
ERROR: Unable to send filesystem
ERROR: Unable to successfully restore device
Got status message
Status: FailASR: __decompressChunk() error: 1000XSTA
ASR: fail
ASR: Could not restore — error 1000
ASR STATUS: fail
restore_apfs_image : failed to restore an APFS image, error = 14
[13:04:40.0806-GMT]<5>7> CHECKPOINT FAILURE:(FAILURE:14) APFS_RELOAD:[0x0C05] restore_invert [0]D(failed to restore APFS image)
restore-step-results = <0x11070C05:<0:14>>
restore-step-codes = <0x11070C05:<0:14>>
restore-step-domains = <0x11070C05:<0:»AMRestoreErrorDomain»>>
restore-step-error = <0x11070C05:»[0]D(failed to restore APFS image)»>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0810-GMT]<5>7> CHECKPOINT NOTICE: (NVRAM set) restore-step-user-progress=12 [sync=true] (first failure)
[13:04:40.0810-GMT]<5>7> CHECKPOINT FAILURE:(FAILURE:14) RESTORED:[0x064F] check_apfs_format [0]D(failed to restore APFS image)
restore-step-results = <0x1107064F:<0:14>;0x11070C05:<0:14>>
restore-step-codes = <0x1107064F:<0:14>;0x11070C05:<0:14>>
restore-step-domains = <0x1107064F:<0:»AMRestoreErrorDomain»>;0x11070C05:<0:»AMRestoreErrorDomain»>>
restore-step-error = <0x1107064F:»[0]D(failed to restore APFS image)»>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0814-GMT]<5>7> CHECKPOINT BEGIN: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = <0x1103064F:49;0x11030C05:54;0x11030647:55>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert;0x11030647:cleanup_check_result>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0817-GMT]<5>7> CHECKPOINT END: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = <0x1103064F:49;0x11030C05:54>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert>
restore-step-uptime = 139
restore-step-user-progress = 12
[13:04:40.0819-GMT]<5>7> CHECKPOINT BEGIN: RESTORED:[0x0648] cleanup_send_final_status
restore-step-ids = <0x1103064F:49;0x11030C05:54;0x11030648:56>
restore-step-names = <0x1103064F:check_apfs_format;0x11030C05:restore_invert;0x11030648:cleanup_send_final_status>
restore-step-uptime = 139
restore-step-user-progress = 12

[Error] ERROR: Unable to restore device
Done: restoring failed.
Failed with errorcode=-11
[Log] Futurerestoring complete

**************** Downgrade complete! Enjoy 10.3.3 =) ****************
**************** Follow me on twitter @mosk_i for help/updates ******
leaders-Mac:1033-OTA-Downgrader-master leader$

The text was updated successfully, but these errors were encountered:

Leadereric commented Oct 29, 2019

My device is iPad4,4

linkway321 commented Oct 29, 2019

My ipad air has been downgraded successfully, ipad mini2 has the same problem as you.

MatthewPierson commented Oct 29, 2019

@Leadereric Please try again with the latest version of the script

Leadereric commented Oct 30, 2019

first i have tried the lasted version , but it seems to interrupt in command line16 or somthing，just keep showing waiting 10 seconds to put device in dfu mode,but actually my device has been in dfu even pwn mode，yet the command did not start the restore

Merculous commented Nov 18, 2019

I’ve never seen this issue before. Could you run everything again and send the full output?

Footer

© 2023 GitHub, Inc.

You can’t perform that action at this time.

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.

Источник

Fail to DFU restore iOS 12.2 iPhone 8 Plus #255

Comments

ChrisCheney commented Mar 29, 2019 •

Using current git snapshot as of today for all components I get the following when trying to restore:

idevicerestore -e iPhone_5.5_P3_12.2_16E227_Restore.ipsw

Found device in DFU mode
Identified device as d21ap, iPhone10,2
Extracting BuildManifest from IPSW
Product Version: 12.2
Product Build: 16E227 Major: 16
Device supports Image4: true
Variant: Customer Erase Install (IPSW)
This restore will erase your device data.
Checking IPSW for required components.
All required components found in IPSW
Using cached filesystem from ‘iPhone_5.5_P3_12.2_16E227_Restore/048-23422-264.dmg’
Found ECID (redacted)
Getting ApNonce in dfu mode. (redacted)
Trying to fetch new SHSH blob
Getting SepNonce in dfu mode. (redacted)
WARNING: Unable to find BbSkeyId node
Request URL set to https://gs.apple.com/TSS/controller?action=2
Sending TSS request attempt 1. response successfully received
Received SHSH blobs
Extracting iBSS.d21.RELEASE.im4p.
Personalizing IMG4 component iBSS.
Sending iBSS (970153 bytes).
[==================================================] 100.0%
Nonce: (redacted)
Extracting iBEC.d21.RELEASE.im4p.
Personalizing IMG4 component iBEC.
Sending iBEC (970153 bytes).
[==================================================] 100.0%
INFO: device serial number is (redacted)
Recovery Mode Environment:
iBoot build-version=iBoot-4513.250.288
iBoot build-style=RELEASE
Sending RestoreLogo.
Extracting applelogo@3x iphone.im4p.
Personalizing IMG4 component RestoreLogo.
Sending RestoreLogo (19932 bytes).
Extracting 048-23877-271.dmg.trustcache.
Personalizing IMG4 component RestoreTrustCache.
Sending RestoreTrustCache (10561 bytes).
ramdisk-size=0x20000000
Extracting 048-23877-271.dmg.
Personalizing IMG4 component RestoreRamDisk.
Sending RestoreRamDisk (90977339 bytes).
Extracting DeviceTree.d21ap.im4p.
Personalizing IMG4 component RestoreDeviceTree.
Sending RestoreDeviceTree (178463 bytes).
Extracting kernelcache.release.iphone10.
Personalizing IMG4 component RestoreKernelCache.
Sending RestoreKernelCache (17744058 bytes).
About to restore device.
Waiting for device.
Device ffffffffffffffffffffffffffffffff00000001 is now connected in restore mode.
Connecting now.
Connected to com.apple.mobile.restored, version 15
Device ffffffffffffffffffffffffffffffff00000001 has successfully entered restore mode
Hardware Information:
BoardID: 4
ChipID: 32789
UniqueChipID: (redacted)
ProductionMode: true
Starting FDR listener thread
About to send NORData.
Found firmware path Firmware/all_flash
Getting firmware manifest from build identity
Extracting LLB.d21.RELEASE.im4p.
Personalizing IMG4 component LLB.
Extracting applelogo@3x iphone.im4p.
Personalizing IMG4 component AppleLogo.
Extracting batterycharging0@3x iphone.im4p.
Personalizing IMG4 component BatteryCharging0.
Extracting batterycharging1@3x iphone.im4p.
Personalizing IMG4 component BatteryCharging1.
Extracting batteryfull@3x iphone.im4p.
Personalizing IMG4 component BatteryFull.
Extracting batterylow0@3x iphone.im4p.
Personalizing IMG4 component BatteryLow0.
Extracting batterylow1@3x iphone.im4p.
Personalizing IMG4 component BatteryLow1.
Extracting glyphplugin@1920 iphone-lightning.im4p.
Personalizing IMG4 component BatteryPlugin.
Extracting DeviceTree.d21ap.im4p.
Personalizing IMG4 component DeviceTree.
Extracting liquiddetect@1920 iphone-lightning.im4p.
Personalizing IMG4 component Liquid.
Extracting recoverymode@1920 iphone-lightning.im4p.
Personalizing IMG4 component RecoveryMode.
Extracting iBoot.d21.RELEASE.im4p.
Personalizing IMG4 component iBoot.
Extracting sep-firmware.d21.RELEASE.im4p.
Personalizing IMG4 component RestoreSEP.
Extracting sep-firmware.d21.RELEASE.im4p.
Personalizing IMG4 component SEP.
Sending NORData now.
Done sending NORData
About to send RootTicket.
Sending RootTicket now.
Done sending RootTicket
Waiting for NAND (28)
Updating S3E Firmware (58)
Checking filesystems (15)

Sits for a few seconds the following shows up:

ERROR: Unable to receive message from FDR 0x558fa99fa540 (-4). 0/2 bytes

There it appears to hang forever, with the Apple on the screen with an empty gauge.

The text was updated successfully, but these errors were encountered:

Источник

Adblock
detector