|
01-08-2019, 05:12 PM
|
#1 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Bimmercode — Error while reading coding data Evening all, Anyone had issues reading ECU’s using the Bimmercode app (iOS) using the VGate BT OBD Adapter? I’ve managed to code the DKOMBI but when I try and read HU_NBT_EVO, I get a «Error while reading coding data» message, which is real bummer as it’s got most of the options I’d like to code. On the G series the supported ECU’s is very limited compared to the F series. I’m hoping this will change as the developer adds more support into later builds. Thanks. |
|
01-08-2019, 05:21 PM
|
#2 |
|
Banned
Drives: X3 M40d Join Date: May 2012 Location: The High Seas |
Did you do the “press start button 3 times in quick succession for diagnostic mode” that they state needs to be done on G series cars? I didn’t need to on my G01 X3 to code the NBT EVO, but maybe it’s worth a try on yours. |
|
01-08-2019, 05:28 PM
|
#3 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Quote:
Originally Posted by teaston Did you do the �press start button 3 times in quick succession for diagnostic mode� that they state needs to be done on G series cars? I didn�t need to on my G01 X3 to code the NBT EVO, but maybe it�s worth a try on yours. You have to do that otherwise the app won’t connect at all. Are you using the VGate BT or WiFi adapter? |
|
01-08-2019, 05:30 PM
|
#4 |
|
Banned
Drives: X3 M40d Join Date: May 2012 Location: The High Seas |
Quote:
Originally Posted by kitster Quote:
Originally Posted by teaston Did you do the “press start button 3 times in quick succession for diagnostic mode” that they state needs to be done on G series cars? I didn’t need to on my G01 X3 to code the NBT EVO, but maybe it’s worth a try on yours. You have to do that otherwise the app won’t connect at all. Are you using the VGate BT or WiFi adapter? The wifi one, but the instructions for both state the diag mode is required on G series. Definitely didn’t need to on mine though. |
|
01-08-2019, 05:35 PM
|
#5 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Quote:
Originally Posted by teaston The wifi one, but the instructions for both state the diag mode is required on G series. Definitely didn’t need to on mine though. I got the BT one because the instructions on the bimmercode site said the WiFi one is «The current version of the Vgate iCar Pro Wi-Fi may not function properly, so it is not recommended any longer.» Which one did you get? https://www.amazon.co.uk/Vgate-ELM32…vgate+icar+pro https://www.amazon.co.uk/Vgate-Scann…vgate+icar+pro |
|
01-08-2019, 05:37 PM
|
#6 |
|
Banned
Drives: X3 M40d Join Date: May 2012 Location: The High Seas |
|
|
01-09-2019, 07:45 AM
|
#7 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly. Trying to reach out to the supplier for a file to back it out……oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh. I might try the �1 for the 1 Month CarPlay trial, see if that does anything. |
|
07-22-2019, 10:16 AM
|
#8 |
|
Registered Drives: BMW X3 Join Date: Jul 2019 Location: Texas, USA |
Sorry to bring up an old post, but I am having the same problem as you mentioned. I also purchased a USB CarPlay unlock from Ebay. Now I can not get bimmercode to show me the headunit settings to code. Have you resolved your issue? If so, please tell me how you did it. Thanks! Quote:
Originally Posted by kitster I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly. Trying to reach out to the supplier for a file to back it out……oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh. I might try the �1 for the 1 Month CarPlay trial, see if that does anything. |
|
07-22-2019, 10:51 AM
|
#9 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Quote:
Originally Posted by JUNNEL20 Sorry to bring up an old post, but I am having the same problem as you mentioned. I also purchased a USB CarPlay unlock from Ebay. Now I can not get bimmercode to show me the headunit settings to code. Have you resolved your issue? If so, please tell me how you did it. Thanks! Quote:
Originally Posted by kitster I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly. Trying to reach out to the supplier for a file to back it out……oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh. I might try the £1 for the 1 Month CarPlay trial, see if that does anything. Developer told me to VO code NBT, make the changes via Bimmercode, then reapply Carplay. I never tried as I just couldn’t be bothered!!! Apple refund me for Bimmercode, told them it wasn’t working on my car. |
|
04-13-2020, 12:59 PM
|
#10 |
|
Major
Drives: 13′ F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List |
Quote:
Originally Posted by kitster Developer told me to VO code NBT, make the changes via Bimmercode, then reapply Carplay. I never tried as I just couldn’t be bothered!!! Apple refund me for Bimmercode, told them it wasn’t working on my car. Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module. Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix.. Any help would be greatly appreciated. __________________ ’13 F30 328i Sport 6MT | ’18 G01 X3 xDrive30i | ’95 E36 325i Vert 5MT |
|
04-13-2020, 07:24 PM
|
#11 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Quote:
Originally Posted by QUiKSR20 Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module. Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix.. Any help would be greatly appreciated. Basically you need to revert the NU_NBT_EVO back to default using esys. Once that is done you make the changes in BimmerCode then reapply CarPlay. |
|
04-13-2020, 07:43 PM
|
#12 |
|
Major
Drives: 13′ F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List |
Quote:
Originally Posted by kitster Quote:
Originally Posted by QUiKSR20 Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module. Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix.. Any help would be greatly appreciated. Basically you need to revert the NU_NBT_EVO back to default using esys. Once that is done you make the changes in BimmerCode then reapply CarPlay. Is there any guides to follow to do that? I connected with ESYS 3.27.1 but once in have no idea where to go or how to do it.. I really just want to set it back to default Any guides or help would be greatly apreciated or if anyone offers remote coding that your aware of id throw them a few bucks via paypal. __________________ ’13 F30 328i Sport 6MT | ’18 G01 X3 xDrive30i | ’95 E36 325i Vert 5MT
Last edited by QUiKSR20; 04-14-2020 at 01:29 AM..
|
|
04-14-2020, 01:31 AM
|
#13 |
|
Major
Drives: 13′ F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List |
Quote:
Originally Posted by QUiKSR20 Quote:
Originally Posted by kitster Quote:
Originally Posted by QUiKSR20 Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module. Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix.. Any help would be greatly appreciated. Basically you need to revert the NU_NBT_EVO back to default using esys. Once that is done you make the changes in BimmerCode then reapply CarPlay. Cool I’ll just have to see what that entails, once in esys is there just an option «return to default» on that module or a similar setting? If so I’ll figure it out I’m an IT guy… Can’t do anything unfortunately till I fix it… Attached Images
__________________ ’13 F30 328i Sport 6MT | ’18 G01 X3 xDrive30i | ’95 E36 325i Vert 5MT |
|
04-14-2020, 04:26 AM
|
#14 |
|
Lieutenant Colonel
Drives: G31 M Sport Join Date: Oct 2012 Location: London, UK |
Quote:
Originally Posted by QUiKSR20 Quote:
Originally Posted by kitster Quote:
Originally Posted by QUiKSR20 Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module. Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix.. Any help would be greatly appreciated. Basically you need to revert the NU_NBT_EVO back to default using esys. Once that is done you make the changes in BimmerCode then reapply CarPlay. Is there any guides to follow to do that? I connected with ESYS 3.27.1 but once in have no idea where to go or how to do it.. I really just want to set it back to default Any guides or help would be greatly apreciated or if anyone offers remote coding that your aware of id throw them a few bucks via paypal. There is a dummy’s guide (with steps), on the coding forum. I still have a printed out copy which I always kept when I was coding. VO Code the NBT ECU (resetting the NBT to default) Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (HU_NBT) => Select CODE. DO NOT CLICK ON THE CODE DEFAULT VALUES BUTTON. |
|
04-14-2020, 05:36 AM
|
#15 |
|
Lieutenant Colonel
Drives: 440i Gran Coupe with MPPSK Join Date: Apr 2012 Location: London |
the only time I got an error code was when I didn’t leave the engine running. I spent about 30 minutes completing the coding and when it came to updating the Vgate had lost connection. I had a «battery drain» warning after the dash cam had been running a few days, so I tried again with the engine running and it was ok __________________ 440i GC with MPPSK, AP intake, 20″ 624 M wheels, Wagner downpipe, Xhp stg 3, BM3 stg 2 |
|
04-14-2020, 09:48 AM
|
#16 |
|
Major
Drives: 13′ F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List |
Quote:
Originally Posted by kitster There is a dummy’s guide (with steps), on the coding forum. I still have a printed out copy which I always kept when I was coding. VO Code the NBT ECU (resetting the NBT to default) Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (HU_NBT) => Select CODE. DO NOT CLICK ON THE CODE DEFAULT VALUES BUTTON. Cool looks like im almost there, I can connect / read / activate FA but when I goto Read SVT I get this error ( have to research it ) Attached Images
__________________ ’13 F30 328i Sport 6MT | ’18 G01 X3 xDrive30i | ’95 E36 325i Vert 5MT |
|
06-11-2020, 10:15 PM
|
#17 |
|
First Lieutenant
Drives: 2017 M3 30 Jahre Join Date: Feb 2016 Location: California |
Tag for same issue |
|
06-13-2020, 07:24 AM
|
#18 |
|
Private First Class Drives: BMW M2 Join Date: Aug 2013 Location: Sweden |
Are you guys using Ebay Carplay? If yes and with the computer based install, you should have acess to a program that was used to install Carplay. With the same program you can uninstall it. Uninstalling it will �open up� your NBT for coding again. After you�re done you simply reinstall the Carplay. I had the same issues on my car with Ebay Carplay (computer method) and trying to code with BimmerCode. However the steps above solved my issues. Just to keep in mind that you have to uninstall Carplay when you want to code NBT and then reinstalling it. |
|
07-30-2020, 05:04 AM
|
#19 |
|
MICATECH
Drives: 330i F30 Join Date: Mar 2009 Location: Melbourne Australia |
Quote:
Originally Posted by kitster There is a dummy’s guide (with steps), on the coding forum. I still have a printed out copy which I always kept when I was coding. VO Code the NBT ECU (resetting the NBT to default) Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (HU_NBT) => Select CODE. DO NOT CLICK ON THE CODE DEFAULT VALUES BUTTON.
Hi, |
|
01-05-2021, 01:16 PM
|
#20 |
|
ENGIN33R
Drives: 2017 X3 xDrive28i Join Date: May 2020 Location: NJ — USA |
Quote:
Originally Posted by perzonal Are you guys using Ebay Carplay? If yes and with the computer based install, you should have acess to a program that was used to install Carplay. With the same program you can uninstall it. Uninstalling it will �open up� your NBT for coding again. After you�re done you simply reinstall the Carplay. I had the same issues on my car with Ebay Carplay (computer method) and trying to code with BimmerCode. However the steps above solved my issues. Just to keep in mind that you have to uninstall Carplay when you want to code NBT and then reinstalling it. Thanks, I am having the same issue. I installed CarPlay using computer method and having an issue with HU module. I will try to uninstall and reinstall after I finished coding with BimmerCode. |
|
01-06-2021, 08:57 AM
|
#21 |
|
Coding ECU’s remotely
Drives: M3LR Join Date: May 2012 Location: UK |
You can code with esys but esys 3.27.1 is too old now for EVO, you need 3.33 or above but then you run into issues with the launcher. If you revert to factory settings either using USB restore file (if your activation came with it) or Feature installer )make sure you have the latest version: HERE Or you VO code with esys then use bimmer code and then re-apply carplay. |
|
01-09-2021, 03:41 AM
|
#22 |
|
Second Lieutenant
Drives: 2016 F36 440i Join Date: Feb 2017 Location: Lancashire, UK |
Quote:
Originally Posted by Wibbles You can code with esys but esys 3.27.1 is too old now for EVO, you need 3.33 or above but then you run into issues with the launcher. If you revert to factory settings either using USB restore file (if your activation came with it) or Feature installer )make sure you have the latest version: HERE Or you VO code with esys then use bimmer code and then re-apply carplay. Hi Wibbles, I have CarPlay activated with feature installer and would like to remove for dealer software updates. Do I remove CarPlay with original feature installer or use the newer version you have linked? __________________ 2016 F36 440i — Estoril Blue | Auto | M Sport Plus | Adaptive Suspension | Adaptive Headlights | EBT-Wireless Charging |
Содержание
- Error while reading coding data
- Error while reading coding data
- Error while reading coding data
- Error while reading coding data
- Error while reading coding data
Error while reading coding data
Краткое описание:
кодирование BMW
Описание:
Кодирование вашего BMW или Mini стало проще.
Для использования BimmerCode требуется один из поддерживаемых адаптеров OBD: https://bimmercode.app/adapters
BimmerCode allows you to code the control units in your BMW or Mini to unlock hidden features and customize your car to your liking.
Activate the digital speed display in the instrument cluster or allow your passengers to watch videos while driving in the iDrive system. Do you want to disable the Auto Start/Stop function or the Active Sound Design? You will be able to code this and much more by yourself with the BimmerCode app.
SUPPORTED CARS
— 1 Series (2004+)
— 2 Series, M2 (2013+)
— 2 Series Active Tourer (2014+)
— 2 Series Gran Tourer (2015+)
— 3 Series, M3 (2005+)
— 4 Series, M4 (2013+)
— 5 Series, M5 (2003+)
— 6 Series, M6 (2003+)
— 7 Series (2008+)
— 8 Series (2018+)
— X1 (2009+)
— X2 (2018+)
— X3, X3 M (2010+)
— X4, X4 M (2014+)
— X5, X5 M (2006+)
— X6, X6 M (2008+)
— X7 (2019+)
— Z4 (2009+)
— i3 (2013+)
— i8 (2013+)
— Mini (2006+)
— Toyota Supra (2019+)
You can find a detailed list of the supported cars and options on https://bimmercode.app/cars
Требуется Android: 4.0 и выше
Русский интерфейс: Нет
(Number one’)
Версия: 4.0.3-9283 Premium by vedserega (Valikovrepikov)
Версия: 3.13.3-7658 Premium (Valikovrepikov)
Версия: 3.13.2-7657 Premium (Number one’)
Версия: 3.13.1-7586 Premium (Valikovrepikov)
Версия: 3.11.1-7565 Premium (Valikovrepikov)
Версия: 3.7.0-7367 Premium (Valikovrepikov)
Версия: 3.5.0-7341 mod (Booka79)
Версия: 3.5.0-7341 Обновление от 12 января 2021 с Google Play (Cимба)
Версия: 3.4.1-7256 
BimmerCode_3.4.1-7256_Mod.apk ( 5.6 МБ )
Источник
Error while reading coding data
For the G series is it advisable to acquire a copy of launcher Pro from TM?
I’ve got a copy of that VM with premium 2.8, but I’m a little worried that the mappings for the G series are outdated.
You dont need esys for that.
What is happening there is that Bimmerlink saves backups for the current VIN numbers and applicable modules in your vehicle. If certificates were changed via the USB, this is triggering the error.
The same error would happen if you plugged in your Bimmerlink into another F3xx car and you would get the same error, untill you reboot the app.
The solution to that is that you need to reset your Bimmerlink, possibly save your old backups to your laptop if you really need them, and then it should work again.
It will ask you again to select the model and it should start normally again.
If you sometime kill the app a few times and restart it, this might also help, but the ultimate solution is to reset the app.
Option 2, What you can do is, if you have an ipad, you can download the bimmerlink using your itunes account and see of that works, which it should.
You dont need esys for that.
What is happening there is that Bimmerlink saves backups for the current VIN numbers and applicable modules in your vehicle. If certificates were changed via the USB, this is triggering the error.
The same error would happen if you plugged in your Bimmerlink into another F3xx car and you would get the same error, untill you reboot the app.
The solution to that is that you need to reset your Bimmerlink, possibly save your old backups to your laptop if you really need them, and then it should work again.
It will ask you again to select the model and it should start normally again.
If you sometime kill the app a few times and restart it, this might also help, but the ultimate solution is to reset the app.
Option 2, What you can do is, if you have an ipad, you can download the bimmerlink using your itunes account and see of that works, which it should.
Источник
Error while reading coding data
Just used this app on my iPhone to make the following changes:
-Auto-Fold Mirrors on comfort touch lock/unlock
-Windows/Mirrors/Sunroof open/close with FOB
-Legal disclaimer removal
-Ambient lighting 100%
-DRL 100% at all times
-Digital Speedometer
-Show current gear in dash
-M Performance iDrive Startup
-M Performance BC startup
-Door handle lights on during reverse
I would highly recommend this app to anyone. It was super easy to utilize and backs up your settings in case you need to revert your changes.
Probably the best $30 (App) and $12 (OBDII Adapter) spent!
Just used this app on my iPhone to make the following changes:
.
-Show current gear in dash
I have low power BT which I prefer for torque pro and leave it in the car all the time. I can confirm it does NOT work for this. Just get the recommended wifi one I think it was like $20. No sense in f*cking around and trying to save $5 or something, since 1. you know the recommended one works and 2. the LAST thing you need is the connection to crap out in the middle of coding.
You make your changes then hit «code» and during that time I have no idea what would happen if you lose connectivity but I cannot imagine it being good.
I have low power BT which I prefer for torque pro and leave it in the car all the time. I can confirm it does NOT work for this. Just get the recommended wifi one I think it was like $20. No sense in f*cking around and trying to save $5 or something, since 1. you know the recommended one works and 2. the LAST thing you need is the connection to crap out in the middle of coding.
You make your changes then hit «code» and during that time I have no idea what would happen if you lose connectivity but I cannot imagine it being good.
Источник
Error while reading coding data
Did you do the “press start button 3 times in quick succession for diagnostic mode” that they state needs to be done on G series cars?
I didn’t need to on my G01 X3 to code the NBT EVO, but maybe it’s worth a try on yours.
You have to do that otherwise the app won’t connect at all.
Are you using the VGate BT or WiFi adapter?
Did you do the “press start button 3 times in quick succession for diagnostic mode” that they state needs to be done on G series cars?
I didn’t need to on my G01 X3 to code the NBT EVO, but maybe it’s worth a try on yours.
You have to do that otherwise the app won’t connect at all.
Are you using the VGate BT or WiFi adapter?
I got the BT one because the instructions on the bimmercode site said the WiFi one is «The current version of the Vgate iCar Pro Wi-Fi may not function properly, so it is not recommended any longer.»
Which one did you get?
I got the BT one because the instructions on the bimmercode site said the WiFi one is «The current version of the Vgate iCar Pro Wi-Fi may not function properly, so it is not recommended any longer.»
Which one did you get?
I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly.
Trying to reach out to the supplier for a file to back it out. oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh.
I might try the Ј1 for the 1 Month CarPlay trial, see if that does anything.
Sorry to bring up an old post, but I am having the same problem as you mentioned. I also purchased a USB CarPlay unlock from Ebay. Now I can not get bimmercode to show me the headunit settings to code. Have you resolved your issue? If so, please tell me how you did it.
I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly.
Trying to reach out to the supplier for a file to back it out. oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh.
I might try the Ј1 for the 1 Month CarPlay trial, see if that does anything.
Sorry to bring up an old post, but I am having the same problem as you mentioned. I also purchased a USB CarPlay unlock from Ebay. Now I can not get bimmercode to show me the headunit settings to code. Have you resolved your issue? If so, please tell me how you did it.
I got a reply from the developer of Bimmercode. It seems like the USB CarPlay unlock has altered the coding data signature for HU_NBT_EVO, that’s why it can’t read the ECU correctly.
Trying to reach out to the supplier for a file to back it out. oh man, I should have just paid for CarPlay or reached out to experts the forum. Doh.
I might try the £1 for the 1 Month CarPlay trial, see if that does anything.
Developer told me to VO code NBT, make the changes via Bimmercode, then reapply Carplay.
I never tried as I just couldn’t be bothered. Apple refund me for Bimmercode, told them it wasn’t working on my car.
Developer told me to VO code NBT, make the changes via Bimmercode, then reapply Carplay.
I never tried as I just couldn’t be bothered. Apple refund me for Bimmercode, told them it wasn’t working on my car.
Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module.
Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix..
Any help would be greatly appreciated.
Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module.
Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix..
Any help would be greatly appreciated.
Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module.
Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix..
Any help would be greatly appreciated.
Is there any guides to follow to do that? I connected with ESYS 3.27.1 but once in have no idea where to go or how to do it.. I really just want to set it back to default
so I can code with the Bimmercode app and then reinstall my carplay when done.
Any guides or help would be greatly apreciated or if anyone offers remote coding that your aware of id throw them a few bucks via paypal.
Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module.
Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix..
Any help would be greatly appreciated.
Sorry to revive an old thread but im facing the same issue, Added Carplay to my G01 x3 and now I cannot code HU_NBT_EVO and all the coding I was looking fwd to doing is in this module.
Were you guys able to resolve this? Im not sure what ( VO code NBT ) means off hand to fix..
Any help would be greatly appreciated.
Is there any guides to follow to do that? I connected with ESYS 3.27.1 but once in have no idea where to go or how to do it.. I really just want to set it back to default
so I can code with the Bimmercode app and then reinstall my carplay when done.
Any guides or help would be greatly apreciated or if anyone offers remote coding that your aware of id throw them a few bucks via paypal.
There is a dummy’s guide (with steps), on the coding forum. I still have a printed out copy which I always kept when I was coding.
VO Code the NBT ECU (resetting the NBT to default)
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Right-Click on ECU (HU_NBT) => Select CODE.
DO NOT CLICK ON THE CODE DEFAULT VALUES BUTTON.
Источник
Error while reading coding data
I’m just getting started with coding, and I received an error while reading all coding data for the SVT today. I don’t know enough to know if this is a big deal, or if it’s something minor and I can proceed with coding.
The very first thing I wanted to do was to backup all the factory-fresh files, so I connected to the car, read the FA, read the SVT, and then right clicked the root SVT node and selected «Read Coding Data».
The dialog that came up had all but one CAFD files created successfully. The single error was:
CAFD_00000F9B_001_026_000 Fehler:
CPS read from ECU «ECUId:ASD_0x3F» failed! [C070]
negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_CPS has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; ECU: ASD_3F_ETHERNET
severity: ERROR
[2130765072]
If I’m reading that correctly, this is for the ASD ECU. I’m not planning on coding that ECU, so can I just ignore this error and code the rest of the ECUs, or is this something I should fix before proceeding? If I did want to code this ECU, how do I fix this error?
A few details on my setup, if it matters:
Windows 7 Professional running on a MacBook Pro in Bootcamp
Windows firewall & anti-virus both off
E-Sys 3.27.1
E-Sys Launcher Premium 2.5.3
PSdZData Lite 59.4
No coding done — first connection ever
Car running the whole time
I figured I’m just a paranoid first time coder and I can ignore it, but better to ask now and avoid any issues.
Источник
- bimmercode
- carly for bmw
- кодирование bmw
- кодирование через смартфон
-
Попробовал. Всё таки работает переключение по тому-же списку, только не нужно нажимать на колесо для подтверждения.
Может у вас другое Г/У и работает как вы описали…Я пробовал на BMW 15 NBT NEXT 2015.
При прокрутке колёсика следующая песня будет согласно списку на дисплее. То есть, он не прыгает на песню которая начинается с любого другого слова.
-
Может зависит от устройства. У меня не NBT, но в настройках проигрывания стоит рандом и при прокручивании треки вылезают в случайном порядке.
pioneeerrav нравится это.
-
Сейчас проверил у себя еще раз. Если в настройках стоит случайное воспроизведение, то список музыки рандомится и колесом выбирается случайная композиция. Если выключить случайное воспроизведение, то список сортируется в алфавитном порядке и точно так же (по алфавиту) проигрывается.
pioneeerrav нравится это.
-
У меня список не меняется от изменений в меню…
-
Может именно в этом дело?
Вот у меня как выглядит:
Случайное воспроизведение включено:
И выключено:
pioneeerrav нравится это.
-
Да, получается проблема с NBT NEXT…
У вас похоже NBT EVO… -
У меня вот такое устройство, самое простое наверное:
В Вашем случае возможно есть какой-то дополнительный параметр, который надо закодировать, чтобы включить перемешивание списка.
-
- Регистрация:
- 20 ноя 2006
- Сообщения:
- 3,691
- Пол:
- Мужской
- Регион:
- Чукотский АО
Кто то пробовал активировать функцию автозапуска на Ф моделях?
Вчера видел в биммеркоде -
Есть ли кодировка, позволяющая отключать фары (габариты) при заведенном двигателе ?
-
Зачем кодировать, нужно просто выключить
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
Как закодировать включение мигания стопсигналов при резком торможении?
-
Оно уже есть , не помню после 120 что ли срабатывает.
глянул на Ф22 стоит кодировка от 50 кмч срабатывает
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
О чём вообще речь идёт? Стояночные или ДХО , что вам мешает
Stop hovering to collapse…
Click to collapse…
Hover to expand…
Нажмите, чтобы раскрыть…
-
Хотелось бы иметь возможность отключать стояночные огни.
-
Стоит ли всегда устанавливать последнюю версию с 4pda или пока установленная работает не трогать ?
-
- Регистрация:
- 12 янв 2017
- Сообщения:
- 230
- Пол:
- Мужской
- Регион:
- Республика Крым
Если серия автомобиля G . То стоит
-
alexander3679
Участник тусовки- Регистрация:
- 27 апр 2021
- Сообщения:
- 47
- Пол:
- Мужской
Друзья, меняю на F48 entrynav 2 на entrynav 2 с wi-fi и активированным carplay. Правда по ошибке когда не на машине активировали карплей, прошили голову под маленький монитор. У меня же экран 8.8. В следствии чего, когда подключаю новую голову дисплей не кажет. Идет звук, магнитола жужжит, картинки нет. Думается прописать дисплей 8.8. Но, когда захожу в подраздел Headunit через Bimmercode (купил, денег не пожалел) сначала идет Exporting activation codes…. А потом Error Error while reading coding data. И чего делать?
-
Не очень понял из сообщения — а новую голову в машине прописали или нет? Если она не прописана, то кодировать ее не получится.
-
Если первый владелец за это не оплатил — то нету))
-
- Регистрация:
- 13 сен 2021
- Сообщения:
- 15
- Пол:
- Мужской
- Регион:
- Украина
-
На ручке переключения ближний/дальний буква «А» и кнопка с торца.
-
- Регистрация:
- 13 сен 2021
- Сообщения:
- 15
- Пол:
- Мужской
- Регион:
- Украина
У меня там «BC» :/, при нажатии переключает показания на приборке, где расход средний, расход мгновенный и тд.
-
- Регистрация:
- 13 сен 2021
- Сообщения:
- 15
- Пол:
- Мужской
- Регион:
- Украина
-
Вот здесь будет две кнопочки
Поделиться этой страницей
|
06-05-2017, 03:19 AM
|
#155 |
|
Private Drives: M2 Join Date: Apr 2017 Location: Las Vegas |
Quote:
Originally Posted by shark715 Bimmercode can’t seem to read my Advanced Crash Safety Module. I get a message that says «Error While Reading Coding Data». I wanted to change some of the seatbelt reminder settings. Any ideas how to work around this? Thanks. Go to the app settings and change the communication protocol to «slow». That should get you passed the comm error message and allow for seat belt chime coding. |
|
06-05-2017, 06:21 AM
|
#156 |
|
Captain Drives: ’11 X5 50i, ’16 M235xi vert Join Date: Nov 2011 Location: New Jersey |
Quote:
Originally Posted by dj2020 Go to the app settings and change the communication protocol to «slow». That should get you passed the comm error message and allow for seat belt chime coding. Thanks! |
|
06-06-2017, 09:40 PM
|
#157 |
|
Brigadier General
Drives: 2023 X1 and 2020 X3MC Join Date: Apr 2010 Location: Toronto |
Is the speed limit info codeable with bimmercode (expert mode)? I have the KAFAS camera set up. __________________ ’11 Z4 30i (retired);’11 X3 28i (retired); ’15 M235i Stage 1 Dinan (recalled & crushed); ’16 M235i Stage 3 Dinan (retired); ’15 X3 28i (retired); ’14 328i (retired), 2019 X3M40i (retired); Loaded ’18 X1 (retired); Loaded ’20 X3MC DG, Black/Tan Merino; Loaded ’23 X1 Cape York green and Red/Black interior |
|
06-07-2017, 09:48 AM
|
#158 |
|
Second Lieutenant
Drives: 2014 228i M-Sport Join Date: May 2017 Location: NJ/MD |
Quote:
Originally Posted by shark715 Late last night I was actually able to get Bimmercode connected to the car twice by pulling the Vgate out of the OBD plug, letting the car go to sleep, reinstalling the VGate, turning the ignition on, pressing the power button on the Vgate, and then starting Bimmercode on my iPad. But after a couple minutes I received a «connection timed out» message. I had a similiar issue, «host is down» and «connection timed out» error messages. Emailed Bimmercode support and was told it could be due to a faulty VGate unit. I have since returned it and purchased another one arriving Thursday. |
|
06-07-2017, 10:27 AM
|
#159 |
|
Captain Drives: ’11 X5 50i, ’16 M235xi vert Join Date: Nov 2011 Location: New Jersey |
Quote:
Originally Posted by lateapex’er I had a similiar issue, «host is down» and «connection timed out» error messages. Emailed Bimmercode support and was told it could be due to a faulty VGate unit. I have since returned it and purchased another one arriving Thursday. Yes, obtaining a replacement worked for me (see my posts above). |
|
06-08-2017, 08:36 AM
|
#160 |
|
Second Lieutenant
Drives: ’14 EBII M235i Join Date: May 2017 Location: MidWest |
On a lease turn-in, would BMW update the software before selling? I picked my ’14 2er through CarMax (first ever experience with them, I’m neither for or against going that route again), so it wasn’t a CPO. Reason I ask is…reading through this thread I noticed some things that peeps have enabled were existing selections for me in iDrive, like Office and the digital speedometer. Sorry if this is a dumb question, but my last experience with iDrive was the version that came with a 2005 530i. So, I’m trying to decide if I wanna endure the headache of buying a Vgate (or similar) and installing the app on my iPad and/or iPhone6. I *REALLY* wanna turn of that [/insert insulting expletives here] ASD!!! |
|
06-08-2017, 03:06 PM
|
#161 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by MadOzodi On a lease turn-in, would BMW update the software before selling? I picked my ’14 2er through CarMax (first ever experience with them, I’m neither for or against going that route again), so it wasn’t a CPO. Not likely, unless inspection warrants. I know plenty of cars sold to new owners with previous owner’s details (eg, home address, bluetooth pairing, etc) as well as customized coding. |
|
06-08-2017, 03:11 PM
|
#162 |
|
Captain Drives: ’11 X5 50i, ’16 M235xi vert Join Date: Nov 2011 Location: New Jersey |
Quote:
Originally Posted by Almaretto Not likely, unless inspection warrants. I know plenty of cars sold to new owners with previous owner’s details (eg, home address, bluetooth pairing, etc) as well as customized coding. Yep, good point |
|
06-08-2017, 07:41 PM
|
#163 |
|
Second Lieutenant
Drives: 2014 228i M-Sport Join Date: May 2017 Location: NJ/MD |
Got a replacement VGate after the first one was giving me issues. Worked like a charm. Items Coded: After coding the Auto-Fold Mirrors on comfort touch lock/unlock, the car automatically shut off on its own which was weird. Anyone ever experience that? Started right up however and nothing seemed out of the oridnary. Can videos be played from your iPhone via Bluetooth or USB? or is it strictly DVD’s? Lastly, after activating Video in Motion I was presented with two choices on the screen both saying n.t.a if I recall correctly. At this point the app said to follow the directions to unlock VIM after a certain speed however there were no directions on how to proceed. I ended up choosing the second n.t.a as the first was already selected. This brought me to a second screen with the options of either Yes or No, I choose yes and the screen reverted back to its normal view. Can anyone comment if they went through a similar scenario. Thanks |
|
06-08-2017, 07:46 PM
|
#164 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by lateapex’er After coding the Auto-Fold Mirrors on comfort touch lock/unlock, the car automatically shut off on its own which was weird. Anyone ever experience that? Started right up however and nothing seemed out of the oridnary. Can videos be played from your iPhone via Bluetooth or USB? or is it strictly DVD’s? If you are not running engine, car is programmed to auto-shutdown after certain time period in order to preserve battery. You can corrupt ECU’s if it shuts down during coding. Videos can be played from all those sources. |
|
06-08-2017, 08:40 PM
|
#165 |
|
Second Lieutenant
Drives: 2014 228i M-Sport Join Date: May 2017 Location: NJ/MD |
Quote:
Originally Posted by Almaretto If you are not running engine, car is programmed to auto-shutdown after certain time period in order to preserve battery. You can corrupt ECU’s if it shuts down during coding. Videos can be played from all those sources. Car was running at the time. Luckily I had received a message stating the coding was complete, then the car randomly shut off. Thanks for the Video In Motion info! |
|
06-08-2017, 09:39 PM
|
#166 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by lateapex’er Car was running at the time. Luckily I had received a message stating the coding was complete, then the car randomly shut off. Thanks for the Video In Motion info! Associated functions will power cycle, but I have never seen vehicle shutdown completely with ignition + engine on. |
|
06-08-2017, 09:56 PM
|
#167 |
|
Second Lieutenant
Drives: 2014 228i M-Sport Join Date: May 2017 Location: NJ/MD |
Quote:
Originally Posted by Almaretto Associated functions will power cycle, but I have never seen vehicle shutdown completely with ignition + engine on. Interesting, if it makes a difference the car had been idling for around 10-15min with drivers side door open the entire time. Weird, but everything seems to be in working order. |
|
06-08-2017, 10:19 PM
|
#168 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by lateapex’er Interesting, if it makes a difference the car had been idling for around 10-15min with drivers side door open the entire time. Weird, but everything seems to be in working order. As long as coding finished before shutting down, things should be fine. You can also scan car for errors with Bimmerlink. |
|
06-08-2017, 11:04 PM
|
#169 |
|
Major General
Drives: M235i (F22 Red angel) Join Date: Jul 2011 Location: undisclosed |
Quote:
Originally Posted by lateapex’er Interesting, if it makes a difference the car had been idling for around 10-15min with drivers side door open the entire time. Weird, but everything seems to be in working order. Maybe you coded the DME by mistake ? |
|
06-09-2017, 06:58 AM
|
#170 |
|
Private First Class
Drives: 2016 M235i MT Join Date: Mar 2017 Location: PA |
Quote:
Originally Posted by Almaretto Videos can be played from all those sources. Maybe I missed how to do this somewhere along the line or can it only be done via mirroring on ’17s? |
|
06-09-2017, 08:43 AM
|
#171 |
|
Second Lieutenant
Drives: 2014 228i M-Sport Join Date: May 2017 Location: NJ/MD |
Quote:
Originally Posted by pikcachu Maybe you coded the DME by mistake ? DME? At the time, the only items I selected to code were for Auto Folding Mirrors on Lock/Unlock. |
|
06-09-2017, 08:56 AM
|
#172 |
|
Captain Drives: ’11 X5 50i, ’16 M235xi vert Join Date: Nov 2011 Location: New Jersey |
Quote:
Originally Posted by lateapex’er After coding the Auto-Fold Mirrors on comfort touch lock/unlock, the car automatically shut off on its own which was weird. Anyone ever experience that? Started right up however and nothing seemed out of the oridnary. Yes, seems to happen any time the FEM is coded. |
|
06-09-2017, 09:03 AM
|
#173 |
|
Private First Class
Drives: 2016 m235 xdrive Join Date: Sep 2015 Location: Mars,PA |
lateapex’er , I coded my car with the Bimmercode app while the engine is running and the same happened to me multiple times. The engine shuts off after the coding is complete. Not sure what I was coding at the time though and no issues afterwards. I have also coded with E-Sys and that never happened that I can recall. |
|
06-09-2017, 02:49 PM
|
#174 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by Nyorky2428 Maybe I missed how to do this somewhere along the line or can it only be done via mirroring on ’17s? Any vehicle with HU_NBT(2) can play videos and not just through mirroring. All you must do is enable video playback with additional codecs. |
|
06-09-2017, 05:44 PM
|
#175 |
|
Private First Class
Drives: 2016 M235i MT Join Date: Mar 2017 Location: PA |
Quote:
Originally Posted by Almaretto Quote:
Originally Posted by Nyorky2428 Maybe I missed how to do this somewhere along the line or can it only be done via mirroring on ’17s? Any vehicle with HU_NBT(2) can play videos and not just through mirroring. All you must do is enable video playback with additional codecs. That explains it, only have HU_NBT_EVO, not the (2) |
|
06-09-2017, 06:06 PM
|
#176 |
|
Major General
Drives: Test Vehicles Join Date: Dec 2015 Location: Mountain View and Los Angeles, CA |
Quote:
Originally Posted by Nyorky2428 That explains it, only have HU_NBT_EVO, not the (2) HU_NBT2 = HU_NBT_EVO = H-H2. Parentheses in grammar are an optional add-on. Therefore, HU_NBT(2) could mean HU_NBT or HU_NBT2. If we are talking mirroring, you require ID5/ ID6 system. If we are talking playing video, you can do with any 609 Pro Nav HU_NBT(2) system. |