Exception dsi occurred как исправить wii

Exception dsi occurred как исправить wii Homebrew Channel — самообновляющееся хомбрю приложение-загрузчик от Team Twiizers, позволяющее пользователям загружать homebrew приложения без необходимости каждый раз запускать эксплойт. После установки канала, он становится доступен пользователю из меню Wii. Он может запускать homebrew c SD/SDHC карты, USB носителя или через TCP/USB Gecko, используя Wiiload. Описание Загрузчик homebrew […]

Homebrew Channel — самообновляющееся хомбрю приложение-загрузчик от Team Twiizers, позволяющее пользователям загружать homebrew приложения без необходимости каждый раз запускать эксплойт. После установки канала, он становится доступен пользователю из меню Wii. Он может запускать homebrew c SD/SDHC карты, USB носителя или через TCP/USB Gecko, используя Wiiload.

Описание Загрузчик homebrew приложений для Wii
Тип Загрузчики
Автор Team Twiizers
Версия 1.0.8
Скачать Hackmii installer
Исходники Закрытый код

Предполагается, что «Twilight Hack» или «Bannerbomb» уже установлены на вашей Wii;

Если у вас уже установлена предыдущая версия Homebrew Channel или иной канал, который может загружать неподписанный код, вы можете использовать их, чтобы установить последнюю версию.

usb:/apps/mplayer_ce/boot.dol (опционально meta.xml/icon.png)

Удаление

Удалить канал можно через менеджер каналов Wii или Hackmii installer.

Источник

Обновление прошивки до 4.2

Данная статья содержит инструкцию по безопасному обновлению Wii до версии прошивки 4.2. Именно 4.2 принесла множество изменений и доработок, а так же 4.2 является одной из самых дружественных прошивок для softmod’а.

Если у вас версия прошивки ниже 3.0, обновитесь по интернету или с лицензионного диска с игрой от Wii до 3.x! Данная инструкция работает только для прошивок версия которых выше 3!

Корейские Wii нельзя обновлять данным способом,ищем диски с играми для оф. обновления. Увы(

Если вы не знаете версию прошивки прочитайте — Как узнать версию прошивки.

Итак, что нам понадобиться:

2.SD карта (подойдет и та,что идет в комплекте)

3.Ноутбук/компьютер с Card-reader’ом

Прошивка Nintendo Wii

Этап I:Подготавливаем SD карту

1.Форматируем SD карту в файловой системе FAT32( для этого — мой компьютер ->>ПКМ* на карте памяти->> Форматировать..->>Выбираем файловую систему FAT 32)

2.Скачиваем нужный файл

3.Скидываем файлы в корень SD карты.

У вас на SD карте должны быть только эти файлы .

Этап II:Обновление прошивки

1.Отключаем Wii от интернета, отключаем все аксессуары! Подключенным остается только один remote и все!

2.Запускаем Wii и заходим в Wii Options

3.Заходим в Data Management->>Channels->> SD Card и нажимаем «YES» для запуска boot.dol/elf
Должен запуститься YAWM Multimod Batch, и начнется процесс прошивки. Дождитесь пока программа завершит установку всех файлов и перейдите с основное меню.

4.Удаляем все файлы с SD карты, чтобы случайно не запустить процесс прошивки еще раз и лечение за рубежом.

Wii уже обновилась, и записала все необходимое во внутреннюю память, а все, что осталось на SD — уже не нужно.

ПОЗДРАВЛЯЮ! МЫ ОБНОВИЛИСЬ ДО 4.2.

  • Ошибка [-1] означает, что SD карта имеет «битые» блоки. Обычно замена SD карты помогает решить данную проблему.
  • Если какие-либо программы не установились на Wii, то просто запустите YAWM Multimod Batch еще раз!
  • Если YAWM Multimod Batch автоматом не цепляет IOS и предлагает выбор — значит до этого вы или кто то еще ломали ее по «надежной» инструкции. Тут поможет только перебор IOS (для начала попробуйте IOS 61)[/spoiler]

*ПКМ — правая кнопка мыши

47 комментариев

А подскажите такую штуку. У меня стоит прошивка 3.1E, пробовал прошить по этой инструкции, но приставка пишет, что SD карта не читается. Может быть из-за того, что она 4Гб размером?

не то что может ли быть, а так оно и есть, у Вас SD-HC карта (все, что больше 2гб — SDHC) только с прошивки 4.2 Вы сможете спокойно пользоваться этими картами, обновитесь до 4.2 с простой карточки и можете пользоваться.

Черт! Так и думал. Спасибо большое.

День добрый! Прошивка 4.1Е Пробовал обновиться по вашему факу, в итоге все упирается в зависание с надписью exception dsi occurred
Подскажите как быть? Спасибо.

Для начала попробуйте отформатировать консоль, и проделать все заново, если не поможет — будем думать)

Спасибо за ответ.
форматнуть-обновить-прошить? Я правильно понял последовательность?
Вероятность, что после формата упрусь в ту же проблему существует?

Да, правильно, и да, существует, если буде тоже самое будем подключать NUS)

В общем все я это затеял ради COD BO, но сегодня чудесным образом удалось установить необходимые wad файлы (до этого консоль тоже выдавала сообщение) exception dsi occurred.
Теперь игра запускается, но при старте мультиплеера выдает следующее сообщение
REQUIRED UPDATE: An update to Call of Duty: Black Ops is available. To advance any further, exit the game and start the Wii Shop Channel. If necessary, add Wii Points there. Из игры обновление недоступно. В интенете вычитал, что вроде бы надо обновить Wii shop channel, не обновляя прошивки самой консоли. Скачал wad, обновил шоп, при заходе в шоп требует принять какие то лиц соглашения и тд.(до этого он вообще не работал) Дальше решил пока не лезть, а посоветоваться, насколько это безопасно, и нужнопоможет ли вообще?
Спасибо 🙂

Вот странно, теперь можно обновиться из игры, безопасно ли это делать? Ничего не слетит, не заблокируется?

Вы все правильно сделали, обновили просто WSC, если речь не идет об обновлении System menu то все безопасно

Обновлять прошивку пока не буду, ибо все что нужно и так работает, но рано или поздно все равно полезу дальше)

В принципе правильно, у меня 4,2. При прямых руках — все работает)

а вообще, есть смысл обновляться на 4.2 ? Что то измениться с новой прошивкой?

Если Вас все устраивает, то нет! Плюсы — программы уже на 4.2 и 4.3 и поддержка SD карт до 32 Гб, кстати сейчас буду писать статью об обновлении при таких ошибках как у Вас.

Привет. Нужна помощь. Предыстория — друг делал мне софтмод год назад, что-то не шло, я делал, скорее всего, поверх сам, не помню как и когда, но более-менее все работало. Затем в один прекрасный момент перестал работать USB Loader (не видел HDD). Версия прошивки 4.1Е (до софтмода не знаю), обновлятся не дает (ошибка). Возможно через Priloader была отключена возможность обновления через интернет, во избежание слета софтмода. Хотел отключить этот фикс, но при запуске Priloader-а джойстики отваливались, ничего не мог сделать. Соединение с интернетом нормальное. Недавно кое что нарыл. Сделал сброс Wii. Все установленные ранее каналы ушли, память отформатировалась (надеюсь 🙂 ). До сброса обновление прошивки заканчивалось неудачно. После сброса обновление запустилось, вроде как приставка обновилась.
Но вот незадача, в настройках пишет версию ПО 4.1е, т.е. как до сброса. Запускаю повторно обновление, пишет, что установлена последняя версия. Хотя на данный момент актуальна версия 4.3. Можете мне объяснить почему так происходит и как можно обновиться до последней версии прошивки, чтобы потом без проблем сделать софтмод с бомбой? И возможно ли вернуть заводскую прошивку?

обновляли через инет?

описывал выше, до форматирования Wii обновление прерывалось ошибкой, после форматирования обновление прошло удачно (насколько я понял), при повторном обновлении пишет, что стоит последняя актуальная версия, хотя в меню стоит все та же 4.1Е

а обновление с диска пробовали устанавливать? Можно обновиться через проги типа NUS. Если будет актуально — опишу)

есть 2-3 диска, МариоКарт, Спорт и Парти, но не знаю есть ли на них обновления. Про НУС где-то читал, но ничего конкретного. Если не затруднит, опиши как и что, можно ссылку на инструкцию. Любая помощь не помешает

http://n-wii.ru/softmod-lyuboj-konsoli-modmii-na-russkom-chastichno/ — вот это может помочь, использует нусовские файлы) просто пожмякайте, какая у вас wii, поставьте 4.1, а хотите получить 4.3, он все скачает, и установите эти вады

Ок, спасибо, попробую, отпишусь

Итак, все, что нужно скачал в папку (все скачалось без ошибок), затем на флешку под фат32, вставил в Wii и не знаю, что делать дальше (во всех пунктах меню смотрел), ничего не нашел

установите все вады через wiimod

Можете подробнее описать все шаги (поставил все галочки при создании папки с модами), не знаю, что делать и в какой очередности

Админ, проблема, как у Ярослава, Wii сбросил, дохожу до пункта 3, черный экран с первой строкой exception dsi occurred. Дальше набор цифр и консоль зависает. Пробовал через ModMii, сгенерированную папку закинул на флешку и дальше хз, что делать

Источник

Hacking [HELP] Exception Type DSI occurred!

usaboy

Active Member

I dont know why, but everything seems fine until I run a game on loadiine. It gives me «Exception Type DSI occurred» message.

I have a Wii U 8gb. 5.3.2.

Followed everystep along the way and downloaded Mario Kart 8 the Ready2Play Loadiine version.

SlateXD

Well-Known Member

I dont know why, but everything seems fine until I run a game on loadiine. It gives me «Exception Type DSI occurred» message.

I have a Wii U 8gb. 5.2.3.

Followed everystep along the way and downloaded Mario Kart 8 the Ready2Play Loadiine version.

Your structure is wrong. I did the same thing. It’s a derp move. Should be Wiiu/games/Game title/

Then in game title its the three folders. code, content, meta

usaboy

Active Member

Your structure is wrong. I did the same thing. It’s a derp move. Should be Wiiu/games/Game title/

Then in game title its the three folders. code, content, meta

gamer4lif3

Well-Known Member

are you using miimaker mode if so it wont work if it is a updated version of mk8 if ssb it should work.

Btw i assume you mean 5.3.2 not 5.2.3

usaboy

Active Member

are you using miimaker mode if so it wont work if it is a updated version of mk8 if ssb it should work.

Btw i assume you mean 5.3.2 not 5.2.3

Yes I meant 5.3.2. I just re-copied and pasted everything into the drive and now the loadiine doesnt have the «._Mario kart 8» that it used to have, just Mario Kart 8. Which is good. But when I run it, it goes into that Exception Type DSI occurred message.

Trying Mario 3D land with MiiMaker mode right now, just in case if the MK8 I had is the updated version.

Just tried with Mario 3D world with MiiMaker mode and it was doing the same thing >.

gamer4lif3

Well-Known Member

usaboy

Active Member

SlateXD

Well-Known Member

well i only have one name for each game show up on my loadiine screen

wiiu/games/zelda/three folders meta, code, etc

i’m not sure whats wrong though. I’m using U games on a 5.4.0 U and it works.

usaboy

Active Member

well i only have one name for each game show up on my loadiine screen

wiiu/games/zelda/three folders meta, code, etc

i’m not sure whats wrong though. I’m using U games on a 5.4.0 U and it works.

SlateXD

Well-Known Member

Just get the games for your version, easier. Make sure each game is supported on compatibility list for the loadiine version you are using.

Get UWizard, and reverse wuds to be loadiine ready. Use mega links Much faster.

usaboy

Active Member

Just get the games for your version, easier. Make sure each game is supported on compatibility list for the loadiine version you are using.

Get UWizard, and reverse wuds to be loadiine ready. Use mega links Much faster.

SlateXD

Well-Known Member

usaboy

Active Member

your sd is fat32 right? so it’s Sd:/wiiu/games/gametitle(zelda)/3 sub folders

then next game is sd:/wiiu/games/gametitle(mario)/3 sub folders

They aren’t joined together or anything right

MiMiCAX

Well-Known Member

Another cause of this error is if your code folder doesn’t have an app.xml and cos.xml, or those xmls have some incorrect information. Some loadiine-ready packages online were made for Loadiine v1/2/3, where the folder structure was different, and the rpx file was renamed to 4 letters.

Here are some things to try:
— make sure you have code/app.xml and code/cos.xml
— if not, check out the xml compilations at http://wiki.gbatemp.net/wiki/Loadiine_compatibility_list
— open code/app.xml, and confirm that ‘title_id’ entry matches your game’s title ID (see http://wiiubrew.org/wiki/Title_database; no need for dash ‘-‘ symbol in ID)
— open code/cos.xml, find the ‘argstr’ tag, take note of the .rpx filename, and confirm that your .rpx file has the same filename (also must be in code folder)

Sumea

Disco Ninja Frog

usaboy

Active Member

Another cause of this error is if your code folder doesn’t have an app.xml and cos.xml, or those xmls have some incorrect information. Some loadiine-ready packages online were made for Loadiine v1/2/3, where the folder structure was different, and the rpx file was renamed to 4 letters.

Here are some things to try:
— make sure you have code/app.xml and code/cos.xml
— if not, check out the xml compilations at http://wiki.gbatemp.net/wiki/Loadiine_compatibility_list
— open code/app.xml, and confirm that ‘title_id’ entry matches your game’s title ID (see http://wiiubrew.org/wiki/Title_database; no need for dash ‘-‘ symbol in ID)
— open code/cos.xml, find the ‘argstr’ tag, take note of the .rpx filename, and confirm that your .rpx file has the same filename (also must be in code folder)

Thank you so much. I tried that just now and it is still the same. With Mario Kart 8 this is what I find:

So they matches like you said but it just keep on crashes and give me that same error code.

Also, when I tried to download update_xml_compilation_19_11_15_eur-rar, it wouldnt let me unzip it. The USA one worked fine but since my games are all in EUR, it doesnt do me any good.

Источник

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

Hacking «Exception (DSI) Occurred!» USB Error when trying to run Wii games from hard drive. Help please!


  • Thread starter

    Logan Workman


  • Start date

    Jun 14, 2016


  • Views
    51,979

  • Replies
    6

Logan Workman

  • #1

sdis2k8gx

So, I’m trying to play Wii games from an external hard drive through the use of ‘USB Loader GX’, and whenever I try to run it with the hard drive plugged in, this pops up. What does it mean, and what am I doing wrong? I have gotten this to work in the past, but I accidentally formatted this same hard drive when backing up my computer, so everything was deleted, (I was reckless, no judging please.) It wasn’t until now, that I’ve started the process of this again, that this error has popped up. Any ideas? Thoughts?

  • #2

sdis2k8gx

So, I’m trying to play Wii games from an external hard drive through the use of ‘USB Loader GX’, and whenever I try to run it with the hard drive plugged in, this pops up. What does it mean, and what am I doing wrong? I have gotten this to work in the past, but I accidentally formatted this same hard drive when backing up my computer, so everything was deleted, (I was reckless, no judging please.) It wasn’t until now, that I’ve started the process of this again, that this error has popped up. Any ideas? Thought?

What is your USB Loader GX version/revision? If you’re not sure then you probably don’t have the latest version and you can find it here: http://www.mediafire.com/download/33llk7a17ucr25f/R1260.7z
How is your hard drive formatted?
What port is the HDD plugged into?
Are you using any unofficial Wii Remotes or Classic Controller/Nunchuck attachments? These tend to have problems with homebrew.
Are you using a Wii Remote Plus (motionplus included)? These tend to have problems with homebrew as well.
What IOS (and version) is HBC running under (if you’re running USBLGX from that), press home in HBC to see the IOS. If you’re running it from its own channel then that doesn’t matter.
Also post a sysCheck. https://gbatemp.net/threads/posting-a-system-check.300279/

Logan Workman

Logan Workman

  • #4

What is your USB Loader GX version/revision? If you’re not sure then you probably don’t have the latest version and you can find it here: http://www.mediafire.com/download/33llk7a17ucr25f/R1260.7z
How is your hard drive formatted?
What port is the HDD plugged into?
Are you using any unofficial Wii Remotes or Classic Controller/Nunchuck attachments? These tend to have problems with homebrew.
Are you using a Wii Remote Plus (motionplus included)? These tend to have problems with homebrew as well.
What IOS (and version) is HBC running under (if you’re running USBLGX from that), press home in HBC to see the IOS. If you’re running it from its own channel then that doesn’t matter.
Also post a sysCheck. https://gbatemp.net/threads/posting-a-system-check.300279/

I’m not sure of the version, I’ll check that out.
It’s formatted as WBFS.
It’s plugged into the second port, but I’ve checked both ports and the same result occurs.
Just a normal, white remote.
No Wii Motion.
«1.1.2 IOS58 v24.32»
I’ll get the sysCheck momentarily. I’m on a mac, so it’s different from the tutorial you sent.

  • #5

I’m not sure of the version, I’ll check that out.
It’s formatted as WBFS.
It’s plugged into the second port, but I’ve checked both ports and the same result occurs.
Just a normal, white remote.
No Wii Motion.
«1.1.2 IOS58 v24.32»
I’ll get the sysCheck momentarily. I’m on a mac, so it’s different from the tutorial you sent.

Which is the second port? The top (side without the small rubber feet if vertical) or bottom?

I would recommend using FAT32 or NTFS instead of WBFS, for several reasons. First, it’s more reliable, second, it makes it easier to copy games over, third, WBFS has a tendency to corrupt existing games when you add new ones, and fourth, you can use the disk for GameCube games and other files as well. Including homebrew as HBC is able to load from a FAT32 formatted HDD now.
FAT32 is required for GameCube games though (unless Nintendont added NTFS support now)
You can convert WBFS to FAT32 quickly using this tool: https://gbatemp.net/threads/wbfs2fat-py.291320/

Logan Workman

  • #6

Which is the second port? The top (side without the small rubber feet if vertical) or bottom?

I would recommend using FAT32 or NTFS instead of WBFS, for several reasons. First, it’s more reliable, second, it makes it easier to copy games over, third, WBFS has a tendency to corrupt existing games when you add new ones, and fourth, you can use the disk for GameCube games and other files as well. Including homebrew as HBC is able to load from a FAT32 formatted HDD now.
FAT32 is required for GameCube games though (unless Nintendont added NTFS support now)
You can convert WBFS to FAT32 quickly using this tool: https://gbatemp.net/threads/wbfs2fat-py.291320/

Hey! I got it working. Yeah, so I guess the files I had got corrupt or something??? I just deleted everything on the SD card and reinstalled USB Loader, and it worked. So yeah, haha, thanks for putting up with me! I appreciate the effort. I did use the program to reformat the hard drive to FAT32 as well, so that, most likely, made it work as well. Thanks!

  • #7

Hello, I have the same problem as you and I couldn’t solve it, can you help me?

Similar threads

You may also like…

captainbob321

@

captainbob321:

Eh, Oh Well. I Also Like Game Theory, Along with Film Theory and Food Theory

5 minutes ago

Данная статья содержит инструкцию по безопасному обновлению Wii до версии прошивки 4.2. Именно 4.2 принесла множество изменений и доработок, а так же 4.2 является одной из самых дружественных прошивок для softmod’а.

Если у вас версия прошивки ниже 3.0, обновитесь по интернету или с лицензионного диска с игрой от Wii до 3.x! Данная инструкция работает только для прошивок версия которых выше 3!

Корейские Wii нельзя обновлять данным способом,ищем диски с играми для оф. обновления. Увы(

Если вы не знаете версию прошивки прочитайте — Как узнать версию прошивки.

Итак, что нам понадобиться:

1.Nintendo Wii

2.SD карта (подойдет и та,что идет в комплекте)

3.Ноутбук/компьютер с Card-reader’ом

Прошивка Nintendo Wii

Этап I:Подготавливаем SD карту

1.Форматируем SD карту в файловой системе FAT32( для этого — мой компьютер ->>ПКМ* на карте памяти->> Форматировать..->>Выбираем файловую систему FAT 32)

2.Скачиваем нужный файл

Для европейского региона (буква E в конце версии прошивки)
Для америки (U в конце версии прошивки)
Для японского региона (J в конце версии прошивки)

3.Скидываем файлы в корень SD карты.

ё12

У вас на SD карте должны быть только эти файлы.

Этап II:Обновление прошивки

1.Отключаем Wii от интернета, отключаем все аксессуары! Подключенным остается только один remote и все!

2.Запускаем Wii и заходим в Wii Options

3.Заходим в Data Management->>Channels->> SD Card и нажимаем «YES» для запуска boot.dol/elf
Должен запуститься YAWM Multimod Batch, и начнется процесс прошивки. Дождитесь пока программа завершит установку всех файлов и перейдите с основное меню.

4.Удаляем все файлы с SD карты, чтобы случайно не запустить процесс прошивки еще раз и лечение за рубежом.

Wii уже обновилась, и записала все необходимое во внутреннюю память, а все, что осталось на SD — уже не нужно.

ПОЗДРАВЛЯЮ!  МЫ ОБНОВИЛИСЬ ДО 4.2!!!

Возможные ошибки:

  • Ошибка [-1] означает, что SD карта имеет «битые» блоки. Обычно замена SD карты помогает решить данную проблему.
  • Если какие-либо программы не установились на Wii, то просто запустите YAWM Multimod Batch еще раз!
  • Если YAWM Multimod Batch автоматом не цепляет IOS и предлагает выбор — значит до этого вы или кто то еще ломали ее по «надежной» инструкции. Тут поможет только перебор IOS (для начала попробуйте IOS 61)[/spoiler]

*ПКМ — правая кнопка мыши

Phorum

Alright, so with about half my homebrew apps such as Homebrew Browser, WiiSX, basically all Homebrew Games, I’m getting this message:

How do I fix it?

Wii System is 4.2.

EDIT: Oh and btw, holymotherwtf at the pirate flash thing. I found that funny. (Forgot to check the box thingy)

Edited 1 time(s). Last edit at 02/01/2010 07:54AM by BeWop.

Take out any external devices that you have plugged in. AKA, rockband controller, USB Device, GC Memory Card, etc.

Quote
BeWop
Oh and btw, holymotherwtf at the pirate flash thing. I found that funny. (Forgot to check the box thingy)

:)

So I can’t use a usb drive for my homebrew stuff?

Not everything will work with a USB drive. Some apps will, though.

Did you try my suggestion?

Yeah, the only thing plugged in is the usb drive used for the apps… So just use an sd card?

SEE?! I’m not the only one! I’m not crazy! I’m not crazy! Hahahaahaa! I knew it.

… But seriously, I have had similar problems. I shall try taking out the GC controller and memory card, as those are the only things plugged in.

What is interesting is that homebrew had worked before. Do you think this could be attributed (at least in part) to system 4.2? Fascinating stuff.

I don’t think it’s 4.2, as it worked great for a while. It just randomly started doing this when I started getting more apps. My emulators work fine though… it’s the homebrew browser and the app games that really have issues.

Edited 1 time(s). Last edit at 02/02/2010 04:04AM by BeWop.

Quote
BeWop
I don’t think it’s 4.2, as it worked great for a while. It just randomly started doing this when I started getting more apps. My emulators work fine though… it’s the homebrew browser and the app games that really have issues.

Have you always been using the same USB drive to load the Homebrew browser/your games?

Edited 1 time(s). Last edit at 02/02/2010 04:37AM by WaxyPumpkin72.

No… and it occurred on both thumb drives. Different brands even.

EDIT: HOKAY so I fixed it, apparantly usb drives are a nono.

Edited 1 time(s). Last edit at 02/04/2010 06:48AM by BeWop.

UPDATE:

Ok, so I just got this message today. I put everything on a SD card, and it worked until today. I was playing Megaman 64 on Wii64, and had been playing for well over an hour, but then it crashed… right as I was about to save it actually, it was annoying =P

So I’m thinking this was something else.

OK all maybe this well help.

I never plug usb drives into my wii nor have I ever. I have the old white wii 4.3u.

My homebrew runs off of SD and has never given me problems. This morning I hooked up wii to my new 60 inch screen for the first time, and also synced my new zelda controller for the first time. About 1 minute into playing Castlevania, I got this same error and had to unplug my Wii.

I went back to using my old controller that always worked and Im still getting the error. So either the zelda controller fkd up my homebrew for good, or my homebrew is having difficulty displaying on my tv. The only other thing I can do is try to hook it up to my old tv to see if it crashes. I it doesnt, then the zelda controller def fudged my homebrew installation.

Using a different controller will not cause any permanent difference, it is not that.
The Wii has no idea what screen it is connected to, or even if it is connected. It is not that.

Chances are the app just got corrupted (it happens sometimes). Delete it and download it again.

For somereason, any application that contains

in its meta.xml seems to crash after 10 seconds of use for me.

Solving the issue was to simply remove that line from all applications i had. Now everything worked fine.

EDIT: Didnt see the date of this thread, but I still think my info may have some use for others experiencing this issue.

Edited 1 time(s). Last edit at 03/13/2012 03:31AM by gamax92.

Quote
gamax92
For somereason, any application that contains <no_ios_reload> in its meta.xml seems to crash after 10 seconds of use for me.

Solving the issue was to simply remove that line from all applications i had. Now everything worked fine.

EDIT: Didnt see the date of this thread, but I still think my info may have some use for others experiencing this issue.

Not really, since that issue has been fixed with HBC 1.1.0.

10th January, 2013, 08:23 PM


#1

Muasau is offline


Newbie


Angry USBLoaderGX «Exception (DSI) occurred»

Hi guys

I have problem with USBLoaderGX «Exception (DSI) occurred». My installation procedure HBC:

— LetterBomb
— DOP-Mii v16
— IOS236_Installer_v6
— cIOSX_rev21-Installer
— USB LoaderGX (version 3.0 r1180) by «USBLoaderGX_Installer_v1.8.exe»

Installation was ok, but when I back up my games to HDD with USB LoaderGX, my Wii was running 2 seconds and error message came up «Exception (DSI) occurred»

After 20 seconds USBLoaderGX kick me back to their main page. I do not know what I’ve done wrong. And what to do. Please help me.

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
…runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)

Drive date: 2007.02.13
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Hollywood v0x11
Console ID: 115512241
Boot2 v4
Found 68 titles.
Found 45 IOS on this console. 12 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 256): Stub
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 2816): Stub
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 5120): Stub
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Stub
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 6912): Stub
IOS80 (rev 6944): No Patches
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS249[58] (rev 21, Info: rev 21): Trucha Bug, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2013/01/10.

Forgive the bad english.
I am very….


11th January, 2013, 02:57 PM


#2

Muasau is offline


Newbie


Default

Is there no one who can help me with this… ???


11th January, 2013, 07:09 PM


#3

Default

I’ve seen this talked about before have you Google it?

They say just remove the files of the SD card and download the new version and install it.

Looking at that sysCheck you haven’t install much.

Download d2x v8.0 final wad pack and install them with

Multi-Mod-Manager (MMM) v13.4

While you’re downloading download PriiLoader 0.7 and install that. You have talked about uninstalling PriiLoader in your other thread.

If you want to remove the other stubs shown in the sysCheck download my wad pack and add them to the wad folder on the SD card and install them with MMM.

Last edited by Keithuk; 27th July, 2013 at 11:49 PM.

Reason: MMM update

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


The Following 2 Users Say Thank You to Keithuk For This Useful Post:

coolmedo (5th October, 2013), dvnt568wii (8th February, 2014)


11th January, 2013, 08:22 PM


#4

Muasau is offline


Newbie


Default

Thanks Keithuk !
Yes, I have searched google for days, but I did not find it.

You said «remove the files of the SD card and download the new version.». If I’m not wrong so my Letter Bomb, DOP-Mii v16, IOS236_Installer_v6, cIOSX_rev21-Install, USB LoaderGX is new version, doesn’t it??. If not then what is old??

Do you think I should just install «D2X v8.0 final wad pack» without changing anything on my current softmod, right ??

Do you think I should remove all stubs or only some of them ??.

I’m totally new with softmod and in here, you know.


11th January, 2013, 09:51 PM


#5

Default

It should have put appsusbloader_gx folder and may be a config folder on the root thats were it stores all settings and game pictures. Delete them both and dowload the
USBLoader_GX_V3_0_AllinOnePackage_IOS249.zip and add it to the SD card.

usbloader-gui — USB Loader GX: GUI for Waninkoko?s USB Loader (based on libwiigui) — Google Project Hosting

You need to install D2X v8.0 final wad pack as that is needed for the new USB Loader GX.

Google USB Loader GX «Exception (DSI) occurred» you have to spell it correctly.

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


11th January, 2013, 11:54 PM


#6

Muasau is offline


Newbie


Default

Ok, I’ll try as you say and let you know later.

Thanks


12th January, 2013, 01:23 PM


#7

Muasau is offline


Newbie


Default

Hi Keithuk!
I found the Custom IOS Uninstaller v1.0. Is it good to use??


12th January, 2013, 01:31 PM


#8

Default

You shouldn’t need any uninstaller just install all 7 wads in D2X v8.0 final wad pack.

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


12th January, 2013, 02:46 PM


#9

Muasau is offline


Newbie


Default

Hi Keithuk!

I try to use «System Menu Hacks» but it says not found «hacks_hash.ini «. In priiloaderv0.7 plus hacks.rar, it has only hacks.ini. What can I do ??


12th January, 2013, 03:47 PM


#10

Default

Thats something that missing in the PriiLoader 0.7 download and it isn’t in priiloaderv0.7 plus hacks either as you say. I’ve added hacks_hash.ini in my PriiLoader_0.7_with_ini_files if you want to extract that ini file and you can add it to the SD card root and the priiloader folder then both options are covered.

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


12th January, 2013, 04:07 PM


#11

Muasau is offline


Newbie


Default

I did as you said. Installs «D2X v8.0 final wad pack» and «my wad pack». But, now USBLoaderGX not find my HDD. It counts down 20 seconds. And does not find HDD.

Then I try to backup a game. It reads disk but says 0.0Gb.

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
…runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Drive date: 2007.02.13
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Hollywood v0x11
Console ID: 115512241
Boot2 v4
Found 74 titles.
Found 50 IOS on this console. 4 of them are stub.

IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug, NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug, NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug, NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug, NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug, NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug, NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug, NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug, NAND Access
IOS80 (rev 16174): Trucha Bug, NAND Access
IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v10

Report generated on 2013/01/12.

What should I do ???


12th January, 2013, 04:23 PM


#12

Default

There are still a few things missing from the IOS’s. Download Full Cios wad pack that will install 202, 222, 223 and 224 don’t bother with the d2x v8.0 as you’ve already installed those.

As for the drive not being recognised what size drive are you using and is it a mains powered USB drive? There are threads on here http://www.digital-kaos.co.uk/forums…ind-hd-253429/ have a read.

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


The Following User Says Thank You to Keithuk For This Useful Post:

kkostas7244 (21st April, 2013)


12th January, 2013, 05:08 PM


#13

Muasau is offline


Newbie


Default

I got error:

Installing 1/1: cIOS202[60]-v5.1R.wad — Ticket (-2011)
Final status — 1 did not complete.

Installing 1/1: cIOS222[38]-v4.wad — Ticket (-2011)
Final status — 1 did not complete.

Installing 1/1: cIOS223[37-38]-v4.wad — Ticket (-2011)
Final status — 1 did not complete.

Installing 1/1: cIOS224[57]-v5.1R.wad — Ticket (-2011)
Final status — 1 did not complete.


12th January, 2013, 05:41 PM


#14

Default

Shut down the Wii and startup and try them again.

Keith

Wii 4.3E, USB Loader GX, CFG USB Loader, WiiFlow

2010 Golf GTD (170)


13th January, 2013, 01:23 AM


#15

Muasau is offline


Newbie



Recommend Projects

  • React photo

    React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo

    Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo

    Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo

    TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo

    Django

    The Web framework for perfectionists with deadlines.

  • Laravel photo

    Laravel

    A PHP framework for web artisans

  • D3 photo

    D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Visualization

    Some thing interesting about visualization, use data art

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo

    Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo

    Microsoft

    Open source projects and samples from Microsoft.

  • Google photo

    Google

    Google ❤️ Open Source for everyone.

  • Alibaba photo

    Alibaba

    Alibaba Open Source for everyone

  • D3 photo

    D3

    Data-Driven Documents codes.

  • Tencent photo

    Tencent

    China tencent open source team.

Понравилась статья? Поделить с друзьями:
  • Executor error during find command caused by operation exceeded time limit
  • Exception access violation как исправить ошибку
  • Executionengineexception string conversion error illegal byte sequence encounted in the input
  • Exception access violation властелин колец как исправить
  • Exception access violation r2 online как исправить