Skip to content
Как исправить ошибку «Focus error» на фотокамере Fujifilm
Как исправить ошибку «Focus error»
Сообщения с ошибками могут появляться на вашем фотоаппарате по разным причинам – неисправность карты памяти, объектива или самой фотокамеры.
В случае возникновения на экране фотоаппарата Focus error», используйте один из предложенных способов её устранения. Инструкция поможет вам исправить ошибки с объективом, памятью фотоаппарата, электропитанием или системным сбоем.
Программа для восстановления данных
Удаление фотографий на фотокамере Fujifilm
Шаг 1: Используйте программу для восстановления данных
В результате неправильного использования фотоаппарата или карты памяти, а также других непреднамеренных действий, фотографии на карте памяти могут быть повреждены или утеряны.
Восстановите утерянные или повреждённые файлы с помощью программ для восстановления файлов. Просканируйте карту памяти с помощью Hetman Partition Recovery и восстановите обнаруженные файлы (фото или видео) в том виде, в котором они будут отображены в предварительном просмотре.
Вы можете бесплатно загрузить программу, что бы убедиться в возможности восстановления файлов. Для знакомства с программой читайте руководство.
Программа для восстановления данных
Ошибка карты памяти
Если сообщение «Focus error» связано с ошибкой карты памяти фотоаппарата Fujifilm, выполните следующее:
Шаг 1: Подключите карту памяти
В цифровых и зеркальных фотоаппаратах фото и видео файлы сохраняются преимущественно на карту памяти. В случае, если карта памяти не подключена к фотоаппарату он может выдавать ошибку.
В таком случае подключите карту памяти к фотоаппарату или, в случае если она подключена, убедитесь в правильности её подключения.
Шаг 2: Отключите и снова подключите карту памяти
В случае определения неисправности карты памяти, отключите её от фотоаппарата. Перед этим не забудьте выключить фотоаппарат. После того, как карта памяти будет изъята из слота убедитесь, что её контакты не повреждены и не загрязнены.
Повторно вставьте карту памяти в соответствующий слот фотоаппарата.
Шаг 3: Разблокируйте карту памяти
Убедитесь в том, что карта памяти не заблокирована. Рычажок блокировки карты памяти (для SD карт) должен находиться в положении «Разблокировано».
В противном случае, если карта разблокирована и имеет место ошибка, сигнализирующая о её блокировке – отформатируйте карту памяти.
Шаг 4: Отформатируйте карту памяти
Если отключение и повторное подключение карты памяти не дало результата – отформатируйте её. Перед форматированием карты памяти убедитесь, что все файлы из неё скопированы на другой носитель, так как форматирование удалит все файлы с карты памяти.
Если форматирование осуществить невозможно, значит карта памяти вышла из строя и её необходимо заменить.
Шаг 5: Снимайте фото или видео в меньшем разрешении
Если во время съёмки камера останавливает процесс записи или сохранения и выдаёт сообщение об ошибке, то это может сигнализировать о недостаточной скорости чтения/записи карты памяти. Скорость чтения/записи карты памяти может быть невысокой как в результате перегрева фотоаппарата, так и невысокой скоростью работы установленной производителем.
В таком случае, рекомендуется уменьшить разрешение снимаемых фотографий или видеороликов.
Шаг 6: Очистите или замените карту памяти
Фотоаппарат может выдать ошибку в случае заполнения внутренней памяти фотоаппарата или карты памяти. Настройте в меню фотоаппарата сохранение файлов на карту памяти, если установлено сохранение во внутреннюю память фотоаппарата. Перенесите файлы с карты памяти на компьютер или очистите её для дальнейшей работы.
Шаг 7: Протестируйте карту памяти с другим устройством
Если карта памяти не определяется фотокамерой, подключите её к другому фотоаппарату или устройству, чтобы убедиться в её работоспособности.
Шаг 8: Используйте совместимую с фотоаппаратом карту памяти
Фотоаппарат может выдать ошибку в случае установки несовместимой с фотокамерой карты памяти. Замените карту памяти на совместимую с данной камерой, в соответствии с рекомендациями производителя.
Ошибка объектива
Если сообщение «Focus error» связано с ошибкой объектива фотоаппарата Fujifilm, выполните следующее:
Шаг 1: Отключите и снова подключите объектив
Отключите объектив от фотоаппарата и убедитесь в целостности и чистоте его металлических контактов, а также контактов объектива на фотоаппарате.
В случае если повторное подключение объектива и чистка контактов не сняли ошибку то, возможно камера нуждается в ремонте.
Шаг 2: Убедитесь в совместимости объектива и фотоаппарата
Ошибка объектива может быть результатом подключения модели объектива, несовместимой с фотоаппаратом. Убедитесь в совместимости модели фотоаппарата с моделью объектива в соответствии с рекомендациями производителя.
Шаг 3: Выключите и включите фотоаппарат снова
Фотоаппарат может давать ошибку в связи с блокировкой или заклиниванием объектива во время его транспортировки. По какой-то из причин блокировка может не отключиться.
Если фотоаппарат сообщает о наличии ошибки объектива, отключите его и повторно включите.
Шаг 4: Обновите прошивку фотоаппарата
Ошибка объектива фотоаппарата может возникнуть в связи с необходимостью обновления прошивки. Проверьте на сайте производителя камеры наличие обновлений прошивки и обновите её в случае наличия.
Повреждение или ошибка файлов
Если сообщение «Focus error» связано с ошибкой повреждения целосности файлов на фотокамере Fujifilm, выполните следующее:
Шаг 1: Скопируйте файлы на компьютер и отформатируйте карту памяти
Если фотоаппарат не может прочесть файлы, скопируйте их на компьютер и попробуйте прочесть или восстановить с его помощью. После этого отформатируйте карту памяти.
Возможно фотографии или видео отсняты другим фотоаппаратом и не могут быть прочтены на этой камере.
Шаг 2: Подключите к фотоаппарату другую карту памяти
В случае если камера сообщает об ошибке в связи с повреждением файлов, и форматирование карты памяти не приносит нужного результата, подключите к фотоаппарату другую рабочую карту памяти.
Если ошибка больше не будет отображаться, то имеет место выход из строя или повреждение карты памяти. Если ошибка повторится – это признак более серьёзных проблем, для решения которых лучше обратиться в сервисный центр.
Шаг 3: Попробуйте сделать снимок ещё раз
В случае если фотокамера не может закончить процесс сохранения или компрессии снимка, выдавая при этом ошибку, попробуйте сделать снимок ещё раз. Возможно необходимо изменить формат файлов фотографий или имеет место сбой одной из функций обработки.
Шаг 4: Разблокируйте файл, который отмечен как «Только для чтения»
Если с помощью фотоаппарата не получается удалить фото или видео файл, он может быть отмечен как «Только для чтения». Зайдите в свойства файла и уберите галочку с атрибута «Только для чтения» с помощью компьютера или меню фотоаппарата (если это предусмотрено производителем).
Ошибка питания
Если сообщение «Focus error» связано с ошибкой питания фотоаппарата Fujifilm, выполните следующее:
Шаг 1: Отключите и снова подключите батарею
В случае ошибки связанной с питанием фотоаппарата, отключите и вытащите батарею (или аккумулятор). Убедитесь, что батарея была подключена к камере правильно. Убедитесь, что модель батареи соответствует модели фотоаппарата. Убедитесь, что контакты батареи не повреждены и не загрязнены. Если предыдущие действия не принесли результата, может иметь место выход батареи из строя.
Шаг 2: Зарядите батарею
Некоторые действия с фотоаппаратом осуществляются с высоким потреблением ресурса батареи. В случае необходимости, например, очистки сенсора цифрового фотоаппарата потребуется полная зарядка батареи. Если камера определит недостаточность заряда батареи для данного действия, камера сообщит об ошибке, связанной с недостаточным зарядом батареи. В таком случае необходимо зарядить батарею.
Шаг 3: Охладите батарею
В случае перегрева батареи фотоаппарата, она может прекратить заряжаться, сигнализируя об этом миганием лампочки зарядки аккумулятора. В таком случае дайте возможность батарее охладиться до нормальной температуры и убедитесь в том, что её контакты не загрязнены.
Общая или Системная ошибка
Если сообщение «Focus error» связано с общей системной ошибкой фотоаппарата Fujifilm, выполните следующее:
Шаг 1: Выключите и повторно включите фотоаппарат
Если фотоаппарат сообщает о наличии общей или системной ошибки, отключите его и повторно включите.
В случае интенсивной работы фотоаппарат может перегреваться. Подождите пока он остынет до нормальной температуры, после чего включите его.
Шаг 2: Перезагрузите фотоаппарат
Для перезагрузки фотоаппарата выключите его, вытащите карту памяти и отключите батарею. Подождите в течении 15 минут и соберите фотоаппарат в обратном порядке. Если ошибка не исчезла, то возможно камера нуждается в ремонте.
Шаг 3: Замените или зарядите внутренний источник питания
Общая или системная ошибка может быть результатом разряда внутренней батареи фотоаппарата (отвечающая в том числе за установку времени и даты камеры).
В таком случае требуется произвести замену или зарядку внутреннего источника питания (в зависимости от формата данного источника питания).
Шаг 4: Перенесите фотографии на компьютер
В случае если фотографии на карте памяти были сделаны другим фотоаппаратом, их просмотр может сопровождаться ошибками. Это связано с тем, что данный фотоаппарат не может отобразить такие фотографии в полном размере и отображает только их эскиз.
Перенесите фотографии на компьютер для просмотра их в полном размере.
Шаг 5: Подключите кабель фотоаппарата к компьютеру или принтеру
Во время переноса фотографий с камеры на компьютер или печати их с фотоаппарата на принтере, может возникать ошибка подключения.
Убедитесь в правильности подключения фотоаппарата к компьютеру или принтеру. Проверьте плотность соединения штекера кабеля фотоаппарата и гнезда устройства. После этого выключите и повторно включите камеру.
Contents
- Deleted Pictures In a Fujifilm Camera
- Memory Card Errors
- Lens Error
- File Damage Or File Error
- Power Error
- Common Or System Error
Error messages may appear on the camera for various reasons — memory card, lens or camera malfunction.
Deleted Pictures In a Fujifilm Camera
-
Use a Data Recovery Program:
Incorrect use of a camera or a memory card or other unintended actions can make pictures in the memory card to become damaged or lost.
Recover lost or damaged files with the help of data recovery software. Scan your memory card with Hetman Partition Recovery and restore the files you have found (pictures or videos) in the form they appear in the preview window.
The tool recovers data from any devices, regardless of the cause of data loss.
You can download the software for free to make sure that your files can be recovered. To find your way with the program read the manual.
Go to view
How to Recover Files from the Memory Card of Your Camera, Phone, Video or Dashboard Cam
Memory Card Errors
If the «Focus error» message is related to a memory card error in a Fujifilm camera, do the following:
-
Connect The Memory Card:
In digital and reflex cameras, photo and video files are mostly saved to a memory card. If the memory card is not connected to the camera, it can show an error message.
In this case connect the memory card to the camera or, if it is already connected, make sure such connection is proper.
-
Disconnect And Reconnect The Memory Card Again:
If a memory card error has occured, disconnect it from the camera. Before doing that, don’t forget to switch the camera off. After you have taken the memory card out of its slot, make sure its contacts are not damaged or dirty.
Insert the memory card into the proper slot of your camera again.
-
Unlock The Memory Card:
Make sure the memory card is not locked. The memory card lock switch (for SD cards) should be in the unlocked (upper) position.
Otherwise, if the memory card is unlocked and there is an error saying it is still locked, you’ll have to format the memory card.
Go to view
How to Unlock a Write Protected USB Drive, a SD or Micro SD Memory Card or a Hard Drive -
Format The Memory Card:
If disconnecting and reconnecting the memory card did not yield any result, format it. Before formatting the car, make sure all files from there are copied to another media, because formatting will delete all the files from your memory card.
If formatting cannot be performed, it means the memory card is out of order and it has to be replaced.
Go to view
How to Fix a Flash Drive for a Computer, TV or Car Audio -
Take Pictures or Make Films In Lower Resolution:
If while shooting a film your camera stops the process of recording/saving and flashes an error message, it may indicate insufficient read/write speed of the memory card. This speed can be low both because of the camera overheating and because of the speed restrictions set by the manufacturer.
In this case, we recommend reducing the resolution of the pictures you are taking or videos you are making.
-
Clean Or Replace The Memory Card:
The camera can flash an error if its internal memory/memory card is full. In the camera’s menu, change the settings so that files are saved to the memory card instead of the camera’s internal memory. Transfer files from the memory card to the computer or clean it to continue your work.
-
Try Testing The Memory Card With Another Device:
If a memory card is not recognized by the camera, connect it to another camera or device to make sure it works properly with them.
-
Use a Memory Card Compatible With Your Camera:
A camera can flash an error if an incompatible memory card is inserted. Replace such memory card with the one compatible with this camera according to the manufacturer’s recommendations.
Lens Error
If the «Focus error» message is related to a lens error in a Fujifilm camera, do the following:
-
Disconnect And Reconnect The Lens Again:
Disconnect the lens from the camera and make sure that its metal contacts are clean and intact as well as the lens contacts on the camera body.
If reconnecting the lens and cleaning its contacts haven’t fixed the problem, the camera may need repairing.
-
Make Sure The Camera And The Lens Are Compatible With Each Other:
A lens error may result from trying to connect a lens model which is incompatible with your camera. Make sure your camera model is compatible with the lense model according to the manufacturer’s recommendations.
-
Switch The Camera «Off» And Then Switch It «On» Again:
A camera can show an error because of its lense jammed or blocked during the transportation. For some reason, the blocking may not be disabled.
If the camera reports a lense error, switch it off and then switch it on again.
-
Update The Camera’s Firmware:
A camera’s lens error may occur because the device needs updating its firmware. Go to the camera manufacturer’s website to check for latest firmware and update it if a newer version is available.
File Damage Or File Error
If the «Focus error» message is related to a file integrity error in a Fujifilm camera, do the following:
-
Copy Files To The Computer And Format The Memory Card:
If the camera fails to read files, copy them to the computer and try opening them on the computer. Then format the memory card.
The pictures or videos may have been taken with another camera model and therefore cannot be read by your particular device.
-
Insert Another Memory Card Into Your Camera:
If your camera reports a damaged file error, and formatting the memory card did not help, connect another memory card (which works properly) to your camera.
If the error does not appear again, then your memory card must have been damaged or broken. If the error occurs again and again, it indicates more serious problems, and you’d better go to a service center to fix them.
-
Try Taking A Picture Once More:
If the camera cannot complete the process of saving or compressing a picture and flashes an error message, try taking a picture again. Picture file format may need to be changed, or there may be a processing function failure.
-
Unlock The File Which Is Marked “Read Only”:
If you cannot delete a photo or video file with the help of your camera, it may be marked “read only.” Go to the file properties tab and uncheck the box “read only” using your computer or camera menu (if such function is provided by the manufacturer).
Power Error
If the «Focus error» message is related to a power error in a Fujifilm camera, do the following:
-
Disconnect And Reconnect The Battery Again:
If there is an error related to your camera’s power supply, disconnect and take out the battery (accumulator cell). Make sure the battery was connected to the camera properly. Make sure the battery model corresponds to the camera model. Make sure the battery contacts are not damaged or dirty. If all the previous actions yielded no result, you battery may be out of order.
-
Charge The Battery:
Some activities of the camera consume much power from the battery. For example, if you need to clean a digital camera sensor, the battery has to be fully charged. If the camera detects that the battery level is insuficient for a certain action, it will report a battery low error. In this case, you need to charge the battery.
-
Cool The Battery:
If the camera’s battery is overheated, it may stop charging and indicate this problem by flashing the accumulator charge light. In this case, let the battery cool down to normal temperature and make sure its contacts are not dirty.
Common Or System Error
If the «Focus error» message is related to a common system error in a Fujifilm camera, do the following:
-
Switch The Camera «Off» And Then Switch It «On» Again:
If your camera reports a common or system error, switch it off and then switch it on again.
A camera may become overheated when used intensively. Wait for the device to cool down to normal temperature and then switch it on.
-
Reload The Camera:
To reload the camera switch it off, take out the memory card and disconnect the battery. Wait 15 minutes and put the camera together in the reverse sequence. If the error is still there, your camera may need repairing.
-
Charge Or Rreplace The Internal Power Supply:
A common or system error may result from discharge of the camera’s internal battery (which also controls the camera’s time and date settings).
In this case, you will have to replace or charge the internal power supply (depending on the format of such power supply).
-
Transfer Your Pictures To The Computer:
If pictures in the memory card are taken with another camera, viewing them can produce errors. It happens because the camera cannot show such pictures in full size and only displays their icons.
Transfer your pictures to the computer to vie them in full size.
-
Connect The Camera’s Cable To a Computer Or a Printer:
When transferring pictures from the camera to the computer or printing them from the camera you may encounter a connection error.
Make sure that the camera’s cable is connected properly to a computer or a printer. Check if the cable fits firmly into the connection socket. After that, switch the camera off and then switch it on again.
- 20 Апр 2011
Здравствуйте, принесли полупроф. фотоаппарат fujifilm finepix s9500 с неисправостью: выключается при переходе в режим камеры. Перебрал объектив, все механизмы исправны (затвор,диофрагма,фокус), собрал, ничего не изменилось. От 6 Вольт питания аппарат перестал отрубаться при переходе в режим камеры, пишет focus error. Заметил, что при отпаяном шлейфе ZEN линза фокуса становится в рабочее положение, и при выключении уходит в начальное положение(при этом всё равно пишет focus error). При припаяном zen линза лишь слегка дёргается при включении. На микросхеме фокуса присутствуют напряжения питания 3,5 и 2х5Вольт. Подскажите, в чём может быть причина?
Что проделано:
Проверены механизмы объектива
Прозвонил шлейфы объектива
двигатель AF исправен
пропаял драйвер двигателя AF
Питание на драйвере есть
- 20 Апр 2011
А что за шлейф ZEN? Функционально, я имею ввиду.
- 20 Апр 2011
Определяет положение зума, я такое вижу впервые, поэтому назвал как на схеме он назван. Выглядит как широкая полоса с пятью дорожками, по которым скользят контакты, в зависимости от положения зума(ручной зум) замыкаются группы дорожек. Расположена внутри объектива вдоль его оси.
Добавлено 20-04-2011 13:37
Вот о чём я:
- 21 Апр 2011
Товарищи профессионалы, нет никаких вариантов с чем такое поведение может быть связано?
- 21 Апр 2011
Только догадки. Выходит дефект именно в определении положения зума, этим самым ZEN механизмом. Предполагаю подломаный шлейф/неконтакт в ползунке.
- 21 Апр 2011
Проверил уже, шлейф идеальный, ползунки контачат. Вопрос: если переключатель режимов фокусировки отключен от платы, это может быть причиной ошибки?
- 26 Апр 2011
Причина была в повреждённом шлейфе от переключателя режимов фокусировки. Если он отключен/оборван и припаян шлейф zen, сразу после включения выдаётся focus error. Проблема решена, спасибо всем за участие.
- 2 Дек 2012
bvd сказал(а):
Причина была в повреждённом шлейфе от переключателя режимов фокусировки. Если он отключен/оборван и припаян шлейф zen, сразу после включения выдаётся focus error. Проблема решена, спасибо всем за участие.
Не верю!
Fujifilm FinePix S9600 тот же 9500. полностью отключен шлейф и никаких ошибок нет.
Скажу даже больше, пользовался фотиком месяцев пять с поврежденным и отключенным шлейфом, пока не нашел замену. И фронт/бэк фокус устранял никогда не подключал этот шлейф.
А этот шлейф больная тема этих моделей. как впрочем и шлейф управления
-
Reply to this topic
-
Start new topic
- Prev
- 1
- 2
- Next
- Page 1 of 2
Recommended Posts
-
- Share
My X100F has locked up, with Focus Error! on the LCD. Time to send it to Fuji for repair. Anyone else experienced this? If so, an estimate of the cost would be appreciated.
-
SpaghettiPaparazzi
-
1
- Quote
Link to post
Share on other sites
Hi Waldo Pepper,
Take a look here Focus Error!. I’m sure you’ll find what you were looking for!
-
- Share
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
Edited December 29, 2018 by SpaghettiPaparazzi
typo
- Quote
Link to post
Share on other sites
-
- Share
I hope someone has more ideas. First thing I would do would be remove battery, then re-install. But I imagine you already tried that. There may be a more powerful reset but I have never heard of one.
- Quote
Link to post
Share on other sites
- Author
-
- Share
Focus Error! is quite common with my X100F!! Normally it’s fixed with a turn off/on. But not this time. Also battery removal did nothing. So it’s off to Fuji, where it can meet its friend (my XPro2) which is also sick. I’m anticipating an eye-widening repair bill …
- Quote
Link to post
Share on other sites
- Author
-
- Share
On 12/29/2018 at 2:31 PM, SpaghettiPaparazzi said:
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
Marry me! Yes, I do use a UV filter. Plus I have an adapter attached to it to use a hood. Just taken all of them off. And … we are go again. Screwed UV on in reverse. Still OK. Added adapter & hood. Still OK.
HUGE THANKS (especially as I have $100 repair bill for an XPro2 and I also live in Thailand, where communications with Fuji Thailand in Bangkok are ‘problematic’ and drink-inducing.)
Thanks for kicking off 2019 on a high note.
- Quote
Link to post
Share on other sites
-
- Share
On 12/28/2018 at 10:31 PM, SpaghettiPaparazzi said:
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
This is the #1 cause of lens error ever since the original x100 came out. I’m glad everything worked out.
-
Colin SD
-
1
- Quote
Link to post
Share on other sites
- Author
-
- Share
7 hours ago, plaidshirts said:
This is the #1 cause of lens error ever since the original x100 came out. I’m glad everything worked out.
Pity Fuji hasn’t issued an advisory note about this (as far as I’m aware).
- Quote
Link to post
Share on other sites
- 2 months later…
-
- Share
Currently having this error with no hood, filter or adapter. Powering on and off doesn’t help, either does removing the battery. When not using filters or hoods — has a solve been found?
- Quote
Link to post
Share on other sites
-
- Share
A solution? What solution. The problem is that any filter stops lens focus movement,
- Quote
Link to post
Share on other sites
- Author
-
- Share
What about the adapter ring I use to attach my JJC lens hood? Does this affect lens movement too? Presumably the official Fuji lens hood also requires an adapter ring. If so Fuji are (knowingly?) contributing to the problem.
i used to have a u/v filter + hood adapter ring’sttached. I had further Focus Error! problems so I’ve removed the filter. Let’s see what happens now.
As mentioned before, it’s a pity Fuji haven’t put out an advisory note on this. I did ask for clarification on several Fuji Twitter sites. Still waiting.
- Quote
Link to post
Share on other sites
-
- Share
The solution is using a threaded spacing ring that just puts a space between a too thick filter mount or lens hood. I have been successfully doing this with an extra thin B&W filter on a 60mm macro which displayed a focus error when used on infinite (or thereabouts).
This is an example of a spacing ring which has the same thread back/front and thin mount in between (you need to find the right thickness)
Edited March 31, 2019 by milandro
- Quote
Link to post
Share on other sites
- Author
-
- Share
I currently have only an adapter ring on to which the lens hood screws (JJC kit). (Previously I had a u/v filter + adapter ring.)
Are you suggesting I get a thin adapter ring to fit between lens & lens-hood adapter?
- Quote
Link to post
Share on other sites
-
- Share
yes, a spacer, not an adapter, there are special spacers, this serves the purpose to allow focusing without impeding the movement of the lens (which is causing the error) of course the spacer has to be thin.
I had this problem when I used my 60mm with a different lens hood than the gigantic original one. I used UV filter by B&W which was thin enough not to jam the focusing movement when focusing at infinity or longer distances.
- Quote
Link to post
Share on other sites
- Author
-
- Share
Just one more query: if I use a thin spacer, can I return to using a u/v filter? So I would have: spacer + u/v + adapter ring for hood.
Thanks for your helpful replies.
By any chance, do u also own an XT20?
- Quote
Link to post
Share on other sites
-
- Share
It al depends from the thickness of the system. I don’t see why not. I have an X-T1 and I am still using it. I am no longer using the 60mm macro.
- Quote
Link to post
Share on other sites
-
- Share
On 3/31/2019 at 5:44 AM, Waldo Pepper said:
What about the adapter ring I use to attach my JJC lens hood? Does this affect lens movement too? Presumably the official Fuji lens hood also requires an adapter ring. If so Fuji are (knowingly?) contributing to the problem.
i used to have a u/v filter + hood adapter ring’sttached. I had further Focus Error! problems so I’ve removed the filter. Let’s see what happens now.
As mentioned before, it’s a pity Fuji haven’t put out an advisory note on this. I did ask for clarification on several Fuji Twitter sites. Still waiting.
I have an adapter, UV filter, and hood combo on my X100F and have never had the error come up. I’ve used the trio on my X100S and X100T also with no problems. The key is to use filters that are thin enough not to block the path of the lens movement. FYI, I’ve always used B+W filters on my X100’s.
- Quote
Link to post
Share on other sites
- Author
-
- Share
plaidshirts: Thanks. I’ll look for a B+W UV filter
- Quote
Link to post
Share on other sites
- 1 month later…
-
- Share
I would suggest you purchase the least expensive 49mm filter available, remove the cheap ‘glass’ and use that in reversed form to mount the quality filter to your camera. Or do as I did, and purchase a complete adapter ring/lens hood from Amazon.
- Quote
Link to post
Share on other sites
- 1 year later…
-
- Share
If you are using the JCC lens hood adapter, thread that on first… then the filter onto the adapter. This provides the needed room for the lens to move.
- Quote
Link to post
Share on other sites
- Author
-
- Share
Hello StephenPG
Thanks for the advice. I was doing that: JJC adapter ring + u/v filter + JJC hood. Focus issues disappeared after I removed the filter!
I traded in the X100F for a 100V. A YouTuber recommended using a B+W filter to sandwich between the JJC adapter and lens hood, which I’ve done. No focus issues to date. So same system as before, just different filter. I’m not sure if the B+W is thicker or thinner than the previous one (just cheap, off the shelf). The lens on the 100V has been tweaked, so maybe it doesn’t travel out as far as the one on the 100F. Excuse my lack of technical geekery.
If I meet an 100V owner who has ‘weather sealed’ the lens using Fuji’s pricey official adapter, it may be worth doing a thickness comparison.
- Quote
Link to post
Share on other sites
- 1 month later…
-
- Share
Wow. Just experienced this lens lock with the UV filter on, but just added the hood spacer and then the UV and I’m ready to go. Super helpful! Thanks.
Edited July 8, 2020 by Iain
- Quote
Link to post
Share on other sites
- Author
-
- Share
Glad to have been of help, Iain. FYI: no focus issues on the X100V with the set-up mentioned in my post …
- Quote
Link to post
Share on other sites
- 11 months later…
-
- Share
Have the “focus error” on an x100f. Using an fpro uv filter. How do you screw it in backwards. I have the adapter ring and a hood. Ready to return the filter.
- Quote
Link to post
Share on other sites
- Author
-
- Share
Sorry: can’t remember what I did with the 100F. With 100V: removed the lens adapter ring (that came with the camera); replaced it with the JJC ring (came with hood); screwed B+W filter into it; attached hood to it.
With the 100F, I may have added a spacer ring before adding the JJC ring. Instead of screwing this in clockwise, it was turned around (ie backwards) and the inner ring screwed in anti-clockwise. Try a Google search for better help.
- Quote
Link to post
Share on other sites
-
- Share
Thanks Waldo, I used the ring that came with the hood and it works. I would have rather screwed it directly to the lens to keep it more compact, but that’s life. Thanks for your response. 📷
- Quote
Link to post
Share on other sites
- Prev
- 1
- 2
- Next
- Page 1 of 2
Join the conversation
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
-
Similar Content
-
-
-
0
By
abjallen
Started Tuesday at 12:37 AM -
5
By
ajurjans
Started Monday at 08:01 AM -
-
-
Posts
-
By
tokyo.photo · Posted 15 hours ago
Hi All! New to the X System here, but have been a photographer for most of my life. Just picked up the GFX 50S ii and am really excited to have a digital medium format. This completely divorces me from film and being locked into Bronica Zenza, which has been very good. I also use full format Nikon z6ii, z7ii, D5, D3, and F3 for assignments when I am not shooting portrait, landscape, or architecture…
Glad to be here and sure a bunch of questions will come up and look forward to participating in this forum.
-
-
-
By
Bertfuji · Posted 21 hours ago
Hi,
I think I have a similar issue.
I own an xpro 3 since December. Before that I had an x100s
Most of the Time the shutter is reacting as expected. Sometimes, often multiple times in a row, the shutter just does not seem to react properly when full pressing. It takes 2 sec to fire for example, after fully pressing down. Or just a half a second longer than normal. I often thought my finger was a bit off the shutter but over time I am really convinced it is the camera. It is as if a full press does not register for a short moment.
mis this what you are describing as well?
I am shooting a manual lens and have tried multiple settings. I first thought the boost mode solved it, but now it returned. I am not shooting with clarity. I also ruled out an almost empty battery as I had it just after a full charge.
Often I thought it returned each time I connected the camera to the computer but this as well does not seam the origin.I still believe it is somehow a software issue easily resolved but fail to find it.
have you send it in to check with Fuji?
thank you for keeping us updated.
greetings
bert
-
-
Enter a search term and click 
.
The following warnings appear in the display.
| Warning | Description |
|---|---|
| i (red) | Low battery. Charge the battery or insert a fully-charged spare battery. |
| j (blinks red) | Battery exhausted. Charge the battery or insert a fully-charged spare battery. |
| s (displayed in red with red focus frame) | The camera cannot focus. Use focus lock to focus on another subject at the same distance, then recompose the picture. |
| Aperture or shutter speed displayed in red | The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subject. |
| [FOCUS ERROR] | Camera malfunction. Turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. |
| [LENS CONTROL ERROR] | |
| [TURN OFF THE CAMERA AND TURN ON AGAIN] | |
| [NO CARD] | The shutter can only be released when a memory card is inserted. Insert a memory card. |
| [CARD NOT INITIALIZED] |
|
| [CARD ERROR] |
|
| [PROTECTED CARD] | The memory card is locked. Unlock the card. |
| [BUSY] | The memory card is incorrectly formatted. Use the camera to format the card. |
| b[MEMORY FULL] | The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space. |
| [WRITE ERROR] |
|
| [FRAME NO. FULL] | The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select [RENEW] for D[SAVE DATA SET-UP] > [FRAME NO.]. Take a picture to reset frame numbering to 100-0001, then select [CONTINUOUS] for [FRAME NO.]. |
| [READ ERROR] |
|
| [PROTECTED FRAME] | An attempt was made to delete or rotate to a protected picture. Remove protection and try again. |
| [CAN NOT CROP] | The picture is damaged or was not created with the camera. |
| [DPOF FILE ERROR] | Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memory card and create a second print order. |
| [CAN NOT SET DPOF] | The picture cannot be printed using DPOF. |
| F[CAN NOT SET DPOF] | Movies cannot be printed using DPOF. |
| [CAN NOT ROTATE] | The selected picture cannot be rotated. |
| F[CAN NOT ROTATE] | Movies cannot be rotated. |
| F[CANNOT EXECUTE] | Red-eye removal cannot be applied to movies. |
| m[CANNOT EXECUTE] | Red-eye removal cannot be applied to pictures created with other devices. |
| [MISMATCH: 4K MODE AND EXTERNAL MONITOR CHANGE MOVIE MODE] | The movie mode selected with the camera is not compatible with the device to which the camera is connected via HDMI. Try selecting a different movie mode (a[MOVIE MODE]). |
| p (yellow) [CAMERA IS APPROACHING STANDARD] [TEMPERATURE LIMIT] |
The camera is approaching the maximum temperature allowed when [STANDARD] is selected for [AUTO POWER OFF TEMP.] and will shortly turn off automatically. Turn the camera off and wait for it to cool. |
| p (yellow) [HIGH TEMPERATURE LIMIT REACHED] [SHUTTING DOWN] |
The camera has reached the maximum temperature allowed when [STANDARD] is selected for [AUTO POWER OFF TEMP.] and is about to turn off automatically. Turn the camera off and wait for it to cool. |
| p (yellow) [CAMERA IS APPROACHING HIGH TEMPER-] [ATURE LIMIT.DO NOT HOLD CAMERA FOR] [LONG PERIODS OF TIME] |
The camera is approaching the maximum temperature allowed when [HIGH] is selected for [AUTO POWER OFF TEMP.] and will shortly turn off automatically. Remaining in contact with the camera could result in low-temperature burns; mount the camera on a tripod or take other steps to avoid prolonged contact with the camera. The camera will shortly turn off automatically. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed. |
| p (red) [HIGH TEMPERATURE LIMIT REACHED] [SHUTTING DOWN] |
The camera has reached the maximum temperature allowed when [HIGH] is selected for [AUTO POWER OFF TEMP.] and is about to turn off automatically to prevent low-temperature burns. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed. |
Fuji X10 — Focus Error! Is This Really The End?
Jun 12, 2016
On turning the X10 on yesterday I got a screen warning I have not seen before — «Focus Error» — complete with a yellow exclamation point at the beginning.
It had last been used a week ago on a ramble around the city with my dog. At home I had taken the card out of the camera and uploaded it to the iMac. The camera sat on the computer table until I picked it up yesterday.
I took the battery out and put it back in. No change. I recharged the battery. Still no luck. I visited the Fuji website to see if there were any FAQs which would deal with my issue. Nothing there.
While being an owner of the X10 has not been without drama, I would miss the little guy if I could no longer reach for it on the way out the door. I did more recently pick up a sony NEX 3N and the 16-50 lens for $150. but the X10 was still a favourite.
What little I found surfing the net does not sound promising.
Perhaps you can fill me in on the Focus Error issue? Is the a sign that my camera is dead? Is there a simple fix that can bring it back to life?
Also — and it may be related — when I turn off the camera the lens makes a funny stuttering noise that I have never noticed before.
http://albinger.me
Fujifilm X10
Fujifilm X20
Sony SLT-A77
Sony SLT-A57
Sony a6000
+6 more
chaznsc
•
Regular Member
•
Posts: 385
Re: Fuji X10 — Focus Error! Is This Really The End?
I am positively the last guy in the universe that should respond…..but:
1 — noises are never good. Perhaps a macro motor dying.
2 — did you try a firmware update?
3 — the camera knows you bought a new one and is simply pouting.
I do hope this gets fixed!
chaz
(unknown member)
•
Veteran Member
•
Posts: 5,400
Re: Fuji X10 — Focus Error! Is This Really The End?
This is a fix I read on someone else’s thread about focus error warnings. Turn on the camera. Put it face down on a flat surface and give the body a bit of a firm and level push down. You might hear a click. Turn it off, then back on. See if the problem has disappeared.
Re: Fuji X10 — Focus Error! Is This Really The End?
LP48 — I think I may have somewhat applied your solution without knowing it! After failing a number of times during the weekend to get anything other than the Focus Error message when I turned the camera on, I put it in my bike bag and cycled over to Vistek, a local camera shop.
When I pulled the camera out turned it on the Focus Error message was gone! I was shocked to see it actually working — and I decided that I wouldn’t send it in after all. Maybe the bumpy bike ride jarred something?
Off I went — stopping at a Thai restaurant for lunch. Out came the camera. I just had to confirm my good luck. I turned it on — the Focus Error message was back!
So — back to Vistek to hand the camera in to the service department. Unbelievably, when I got to the service desk, I turned it on — and it worked!
The camera is being sent to Fuji service and I’ll find out next week what they can do. A technician mentioned the likelihood of the main board — perhaps he was referring to the camera’s processor? — needing replacing. He estimated about $100 to $130 CDN. to do the job. Hopefully he was not being overly optimistic.
http://albinger.me
Fujifilm X10
Fujifilm X20
Sony SLT-A77
Sony SLT-A57
Sony a6000
+6 more
(unknown member)
•
Veteran Member
•
Posts: 5,400
Best wishes, Peter
I loved my X10 cameras. I hope you get it back working as good as new!
MOD
kwa_photo
•
Veteran Member
•
Posts: 3,607
Re: Best wishes, Peter
I hope is keeps working once it’s back. It’s a fun camera. If it’s unreliable down the road or just plain dead, time for a replacement then X30? Or even a used X20 would still get you the OVF and the same body style at least.
— hide signature —
Ken
FujiFilm FinePix Moderator (Please PM vs. a public post if you have concerns or questions about the forum)
Panasonic Lumix DC-S5
Panasonic Lumix S 20-60mm F3.5-5.6
Panasonic Lumix S 70-300 F4.5-5.6 Macro OIS
Panasonic Lumix S 50mm F1.8
+1 more
Folks, thanks for the «get well soon» wishes!
I still like my X10, as quirky a camera as it has proven to be! In spite of a mostly Sony line-up, I still reach for it in certain situations. I did a couple of weeks ago to build up a photo collection of neo-classical archtiecture in Toronto for a future post.
Here is the last time my X10 shots resulted in a post at my blog site — it was just after our first major snowfall in mid-January.
January 12, 2016 – Viggo In The Snow As It Blankets Riverdale
I am just hoping the Fuji repair department does not conclude it is working okay — as I did both times I stood at the service counter and turned it on!
Fujifilm X10
Fujifilm X20
Sony SLT-A77
Sony SLT-A57
Sony a6000
+6 more
chaznsc
•
Regular Member
•
Posts: 385
Re: Best wishes, Peter
I’m on pins and needles over here!
audavid
•
New Member
•
Posts: 1
Re: Best wishes, Peter
In reply to chaznsc
•
Jul 17, 2017
Hi, I know this is a old thread but did you guys get it fix? I have the camera since new and the problem is still here. I tried the push down method but didn’t work.
Re: Best wishes, Peter
In reply to audavid
•
Jul 18, 2017
audavid wrote:
Hi, I know this is a old thread but did you guys get it fix? I have the camera since new and the problem is still here. I tried the push down method but didn’t work.
audavid, the camera did go to Fuji Canada in Toronto for repair. They quoted $340. CDN to have the lens replaced. I told them to just send the camera back! In the meanwhile I spotted an incredible deal on a X20 for $250. and decided to buy it as a replacement for the X10.
Now here is the weird part — when the X10 came back it was working! I have not had any issues with it since. While I usually grab the X20 now — it is just a better camera — I still occasionally shoot with the X10 — it reminds me of the hours I spent on this forum reading threads about EXR and how it works! I certainly would not take the X10 on a trip since I could not be sure if the problem will come back or not!
I realize this is not a very helpful answer to your question! Good luck with your X10.
Here are a few X10 shots taken yesterday while walking the dog — I am always surprised when the camera works when I twist that lens!
Fujifilm X10
Fujifilm X20
Sony SLT-A77
Sony SLT-A57
Sony a6000
+6 more
I had this issue after honeymoon in 2015. I have periodically tried to start it again but could not get it to work. Out of the blue I thought I would try and google it again today and found this post. I tried it a few times and it worked!!! I have a Canon 7D and various lenses so use this mostly but to have this little camera working again is a dream! Thank you everyone.
Peter Albinger wrote:
audavid wrote:
Hi, I know this is a old thread but did you guys get it fix? I have the camera since new and the problem is still here. I tried the push down method but didn’t work.
audavid, the camera did go to Fuji Canada in Toronto for repair. They quoted $340. CDN to have the lens replaced. I told them to just send the camera back! In the meanwhile I spotted an incredible deal on a X20 for $250. and decided to buy it as a replacement for the X10.
Now here is the weird part — when the X10 came back it was working! I have not had any issues with it since. While I usually grab the X20 now — it is just a better camera — I still occasionally shoot with the X10 — it reminds me of the hours I spent on this forum reading threads about EXR and how it works! I certainly would not take the X10 on a trip since I could not be sure if the problem will come back or not!
I realize this is not a very helpful answer to your question! Good luck with your X10.
Here are a few X10 shots taken yesterday while walking the dog — I am always surprised when the camera works when I twist that lens!
Keyboard shortcuts:
FForum
MMy threads
Latest sample galleries
Latest in-depth reviews
The OM System M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is finally here! Chris has opinions.
The Canon EOS R8 is the company’s latest mid-level full-frame mirrorless camera. It brings the sensor and autofocus from the EOS R6 II and combines them in a smaller, more affordable body.
The Canon EOS R50 is an entry-level, compact APS-C mirrorless camera. A 24MP RF-mount camera aiming to attract smartphone users and, perhaps, vloggers.
See what Chris and Jordan think of the Canon EOS R8 after shooting in Charleston, South Carolina.
The Canon EOS R50 is inexpensive. It’s tiny. Is it good? Jordan and Chris dodged alligators in South Carolina to find out.
Latest buying guides
Above $2500 cameras tend to become increasingly specialized, making it difficult to select a ‘best’ option. We case our eye over the options costing more than $2500 but less than $4000, to find the best all-rounder.
There are a lot of photo/video cameras that have found a role as B-cameras on professional film productions or even A-cameras for amateur and independent productions. We’ve combed through the options and selected our two favorite cameras in this class.
What’s the best camera for around $2000? These capable cameras should be solid and well-built, have both the speed and focus to capture fast action and offer professional-level image quality. In this buying guide we’ve rounded up all the current interchangeable lens cameras costing around $2000 and recommended the best.
Family moments are precious and sometimes you want to capture that time spent with loved ones or friends in better quality than your phone can manage. We’ve selected a group of cameras that are easy to keep with you, and that can adapt to take photos wherever and whenever something memorable happens.
What’s the best camera for shooting sports and action? Fast continuous shooting, reliable autofocus and great battery life are just three of the most important factors. In this buying guide we’ve rounded-up several great cameras for shooting sports and action, and recommended the best.
Potential Solutions to the Lens Control Error First, reset the camera to factory default settings. On most Fuji cameras like the X100T, XT1, and XT10, you’ll press MENU > Go to setup 1 (the wrench with a “1” next to it) > and then click RESET > OK. Wait 30 seconds after the reset has finished.
Full
Answer
What should I do if my Fujifilm camera won’t turn on?
Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer. Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a FUJIFILM dealer.
This is a fix I read on someone else’s thread about focus error warnings. Turn on the camera. Put it face down on a flat surface and give the body a bit of a firm and level push down. You might hear a click. Turn it off, then back on. See if the problem has disappeared.
Why won’t my camera focus on my lens?
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
What’s the number one cause of lens errors on X100?
This might be interesting too: Fuji X Lenses This is the #1 cause of lens error ever since the original x100 came out. I’m glad everything worked out. Pity Fuji hasn’t issued an advisory note about this (as far as I’m aware). More sharing options… 2 months later… What about the adapter ring I use to attach my JJC lens hood?
How do I fix focus error on Fujifilm?
Potential Solutions to the Lens Control ErrorFirst, reset the camera to factory default settings. … Turn the camera off.Next, take the battery out of the camera and leave the battery out for a FULL 2 minutes.Take the lens off and then replace it 3 times.Turn the camera back on and cross your fingers!
What is focus error?
Focus error. In photography , a focus error is an aberration of the autofocus (thus, the camera focuses a subject but the lens is not aligned correctly, causing a blurry image).
How do you fix read error on Fujifilm camera?
Part 2: How to fix Fujifilm card errorCheck whether the memory card is compatible or not. Before anything else, make sure that your SD card is compatible with the Fujifilm camera you own. … Test the card in another device. … Wipe memory card contacts with a soft cloth. … Format SD memory in the camera or computer.
How do I get my Fujifilm camera to focus?
Follow the steps below to focus the camera manually.Slide the focus mode selector to M. will appear in the display.Focus manually using the focus ring. Rotate the ring left to reduce the focus distance, right to increase. … Take pictures.
What is the function of focusing error signal?
Reading the digital data from the disc requires three signals to be extracted from the reflected laser beam by the reading head: the focusing error signal to keep the laser beam focused on the data pits; the tracking error signal to keep the beam radially centred on the track; and the intensity signal from which the …
What is card error on FUJIFILM camera?
CARD ERROR. The memory card is not formatted for use in the camera: Format the card. The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card.
How do I format my FUJIFILM SD card?
FORMATSelect USER SETTING > FORMAT in the (SET UP) tab.Highlight the slot containing the card you wish to format and press MENU/OK.A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK.
What does write error mean digital camera?
The contacts between the camera and the memory card could be bad or dirty. Take out the card and make sure the area where the metal contacts on the card touch the contacts the camera are clean and free of debris. Also, make sure the card is in properly.
What is Fujifilm focus check?
3:265:54Fujifilm Focus Check — YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply press and hold down the disp. Back button on the back of the camera. Simply find the buttonMoreSimply press and hold down the disp. Back button on the back of the camera. Simply find the button right here go into the settings. And look for. Focus check boom.
How does Fujifilm autofocus work?
3:4816:28The Fujifilm X-Series Autofocus System Explained — YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition and size in the frame. So if they’re moving straight towards the camera or away they’re notMorePosition and size in the frame. So if they’re moving straight towards the camera or away they’re not moving side to side then single auto focus will get the job done.
How do you change the focus on a Fujifilm?
STEP 1 Press MENU OK and scroll down to AF/MF SETTING. STEP 2 Choose AF MODE and select SINGLE POINT. You can also change focusing point mode from the Q Menu, or via the default function (Fn) button.
Why is my SD card not working in my camera?
Check the Lock tab of the memory card: This problem may be caused by the Lock tab of the memory card. Take the memory card out of the camera and temporarily move the Lock tab to the Lock position, then move it back to the Unlock position. Check if there is anything wrong with the memory card.
How do I format an SD card?
How to format an SD card on an Android deviceWith the SD card inserted into your Android device, open «Settings.»Tap on «Device care.»Tap on «Storage,» then tap on «Advanced.»Look for your SD card underneath the «Portable storage» header. … Tap on «Format.» In the pop-up that appears, tap on «Format SD card.»
How do I initialize my SD card?
Solutions to Fix “SD Card Not Initialized” ErrorSwitch off the device, remove the SD card, and reinsert. Turn on the device and see if it worked. If it didn’t, then proceed to the next step.Get soft and clean cotton to clean the memory card pins (i.e. the electrical contacts). Once done, repeat the step above.
How do I reformat an SD card on a Mac?
How to Format SD Cards on Mac: The Quick VersionConnect your SD card to your Mac using a SD memory card reader.Open Disk Utility app.Select your SD card.Choose Erase function.Enter SD card name (optional)Choose filesystem format. If 64GB or larger, choose exFAT. If 32GB or smaller, choose FAT32.Erase.
Waldo Pepper
My X100F has locked up, with Focus Error! on the LCD. Time to send it to Fuji for repair. Anyone else experienced this? If so, an estimate of the cost would be appreciated.
SpaghettiPaparazzi
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
Waldo Pepper
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
plaidshirts
Are you using a UV filter with an adapter? If so, putting this on backward will restrict the lens from breathing in and out thus it was unable to focus freely, causing this error. message. This happened to me and I had to keep powering off/on the camera until I figured it out. Good Luck!
Waldo Pepper
This is the #1 cause of lens error ever since the original x100 came out. I’m glad everything worked out.
Waldo Pepper
What about the adapter ring I use to attach my JJC lens hood? Does this affect lens movement too? Presumably the official Fuji lens hood also requires an adapter ring. If so Fuji are (knowingly?) contributing to the problem.
milandro
The solution is using a threaded spacing ring that just puts a space between a too thick filter mount or lens hood. I have been successfully doing this with an extra thin B&W filter on a 60mm macro which displayed a focus error when used on infinite (or thereabouts).
How to fix a Fujifilm camera?
Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a FUJIFILM dealer.
How to clean memory card contacts?
The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card.
Can you focus on a camera with a red frame?
Charge the battery or insert a fully-charged spare battery. (displayed in red with red focus frame) The camera can not focus. Use focus lock to focus on another subject at the same distance, then recompose the picture. Aperture or shutter speed displayed in red.
What Was The Fuji X100F Manual Focus Problem?
All previous versions of the X100 series have maintained the focus distance when the camera was powered off or entered sleep mode. This let street photographers (like myself) use the camera as a hyperfocal shooter. Set the focus point to the hyperfocal distance of the lens at a given aperture and shoot with the confidence that just about everything will be in focus all the time.
What happens when you focus on a Fuji X100?
The front element of the 23mm f/2 lens moves forward and back when you focus. Previous models of the Fuji X100 would remember your focus position after a power down making it possible for the lens to collide with the lens cap when the camera is powered on. When this happened, the camera would throw an error and you’d have to remove the lens cap and restart the camera.
How far does the Fuji X100F focus?
For some reason Fuji decided to protect the AF motor and force the Fuji X100F to reset the focus distance to 2 meters (or around 7 feet) whenever the camera powers down or enters sleep mode. This means every time the camera powers up your focus point is in the wrong spot. WHAT THE H??
What is the Fuji X100F?
The Fuji X100 series of cameras have been a favorite of street photographers since day one. And the latest Fuji X100F is a stellar little shooter but whenever the camera powered down the manual focus distance reset to 2 meters which made manual focus shooters (like me) a little crazy.
Where can I buy a Fuji X100F?
You can buy the Fuji X100F online at your favorite online retailer: Fuji X100F (Black) at B&H. Fuji X100F (Silver) at B&H. Fuji X100F (Black) on Amazon. Fuji X100F (Silver) on Amazon. Fuji X100F (Black) at Adorama. Fuji X100F (Silver) at Adorama.
Popular Posts:
123
Предупреждающие индикаторы
В таблице ниже приведены предупрежде-
ния, которые отображаются на экране.
Отображаемое
предупреждение
Описание
Батареи питания камеры близки к раз-
ряду или разряжены полностью.
Сильное влияние перемещения камеры
из-за низкой скорости затвора.
Не может быть эффективно выполнена
автофокусировка.
Выход за пределы диапазона автома-
тической регулировки экспозиции.
Способ устранения
Замените/перезарядите батареи питания.
Используйте режим съемки со вспышкой.
Однако, для некоторых сцен и режимов
необходимо использовать штатив.
— Если изображение слишком темное, вы-
берите объект, находящийся на расстоя-
нии около 2 метров от объекта съемки.
— Используйте режим фикс-фокуса.
Съемка может быть выполнена, но экспо-
зиция будет установлена неправильно.
Светится красным
Мигает красным
FOCUS ERROR
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
CARD ERROR
CARD FULL
WRITE ERROR
BUSY
FRAME NO. FULL
READ ERROR
TOO MANY FRAMES
Сбой или неисправность камеры.
Не установлена карта памяти.
— Карта памяти не отформатирована.
— Загрязнены контакты карты xD-Picture
Card.
— Сбой камеры.
— Загрязнены контакты карты xD-Picture
Card.
— Карта памяти повреждена.
— Карта памяти неправильно отформа-
тирована.
— Сбой камеры.
Карта памяти записана полностью.
— Информация не может быть записана
из-за ошибки карты памяти или сбоя
связи между картой памяти и камерой.
— Отснятое изображение не может быть
записано, т.к. его размер превышает
величину свободного места на карте
памяти.
Время для записи было определено
неправильно, т.к. карта была отформа-
тирована на компьютере.
Номер кадра достиг 999-9999.
— Файл, который Вы хотите воспроизве-
сти, был записан неправильно.
— Загрязнены контакты карты памяти
xD-Picture Card.
— Сбой камеры.
— Вы пытаетесь воспроизвести видео-
клип, записанный на другой камере.
В режиме сортировки по дате Вы хотите
отобразить более 5000 изображений.
— Вновь включите камеру, не прикасаясь к
объективу.
— Выключите/включите камеру несколько
раз. Если вновь будет отображено сооб-
щение об ошибке, обратитесь к дилеру
FUJIFILM.
— Установите карту памяти.
— Отформатируйте карту памяти.
— Протрите область контактов карты xD-
Picture Card при помощи сухой, мягкой
ткани. Иногда бывает необходимо отфор-
матировать карту xD-Picture Card. Если
сообщение об ошибке появится вновь,
замените карту xD-Picture Card.
— Обратитесь к дилеру FUJIFILM.
— Протрите область контактов карты памя-
ти xD-Picture Card при помощи сухой, мяг-
кой ткани. Иногда бывает необходимо от-
форматировать карту памяти xD-Picture
Card. Если сообщение появится вновь,
замените карту памяти xD-Picture Card.
— Обратитесь к дилеру FUJIFILM.
Сотрите некоторые изображения или ис-
пользуйте карту памяти, на которой дос-
таточно свободного места.
— Переустановите карту памяти или вык-
лючите и вновь включите камеру.
— Используйте новую карту памяти.
Используйте карту памяти, отформатиро-
ванную на камере.
(1) Установите в камеру отформатиро-
ванную карту.
(2) В меню SET-UP установите параметр
FRAME NO. в положение RENEW.
(3) Начните съемку. (Нумерация будет
начата с 100-0001).
(4) В меню SET-UP установите параметр
FRAME NO. в положение CONT.
— Изображения не могут быть воспроизве-
дены.
— Протрите область контактов карты памя-
ти xD-Picture Card при помощи сухой, мяг-
кой ткани. Иногда бывает необходимо от-
форматировать карту памяти.
— Обратитесь к дилеру FUJIFILM.
— Видеоклипы и изображения не могут быть
воспроизведены.
В режиме сортировки по дате могут быть
отображены не более 4999 изображений.
|
Дисплей диафрагмы/выдержки
(Светится красным)
Русские инструкции www.rusmanual.ru