Geany ошибка 9009

Thank you, you are correct. I actually deleted Python and reinstalled, making sure to tick the checkbox to add it to path during the installation.

All fixed now, thank you.

I had added python to the path and it’s still giving me that 9009 error

I also added it to the path and I am still getting the 9009 error

I had the same problem (Python installed and in PATH). I was able to fix this by following the instructions in this Reddit comment:

Open Webui-user.bat in notepad

You’ll see Python=

Find your python.exe install directory and add it after the equals

Example

Python=C:/python310/python.exe

I gave it the same file path as in PATH, so I’m truly clueless what the problem was. But this worked for me!

I had the same problem (Python installed and in PATH). I was able to fix this by following the instructions in this Reddit comment:

Open Webui-user.bat in notepad
You’ll see Python=
Find your python.exe install directory and add it after the equals
Example
Python=C:/python310/python.exe

I gave it the same file path as in PATH, so I’m truly clueless what the problem was. But this worked for me!

I had same problem, also use this worked for me, thanks!

When I open the webui-user.bat I got this error

‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command,
operable program or batch file.
Creating venv in directory venv using python
Unable to create venv in directory venv

exit code: 9009

stderr:
‘-m’ is not recognized as an internal or external command,
operable program or batch file.

Launch unsuccessful. Exiting.
Press any key to continue . . .

Is there anything wrong when I install python or anything else?

@XuanRTS

When I open the webui-user.bat I got this error

‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv

exit code: 9009

stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.

Launch unsuccessful. Exiting. Press any key to continue . . .

Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this:
Here’s an example:

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

This was the solution to error 9009 in my case

I did enter the path and it shows like:
venv «C:UsersUSERDownloadsstable-diffusion-webui-masterstable-diffusion-webui-mastervenvScriptsPython.exe»
No Python at ‘»C:UsersUSERAppDataLocalProgramsPythonPython311python.exe’
anyone have the idea??

I did enter the path and it shows like: venv «C:UsersUSERDownloadsstable-diffusion-webui-masterstable-diffusion-webui-mastervenvScriptsPython.exe» No Python at ‘»C:UsersUSERAppDataLocalProgramsPythonPython311python.exe’ anyone have the idea??

Okay, I figured it out. I was having the same issue. Two things: make sure that you actually added Python.exe at the end of the directory and make sure the directory is next to PYTHON=. I forgot to do the former: ID10T error. lol Thats what solved my problem anyway.

in fact,your windows have 2 path
one,at yourusername ‘s environment variables
two,at system environment variables
the bat will check 2nd
remember reboot your PC,have fun

If someone is still having problems after trying the comments above, I tried uninstalling python, and in the re-installation I choose the custom install, checked the «install for all users» checkbox and finished the rest with default configuration. It worked for me because the path changed to C:/ProgramFiles instead of C:/Users/XXX/AppData/Local/Programs. I don’t know if this is the recomended way but I can use it now.

In my case, the issue ended up being solved by not having the SD webui cloned to my GitHub folder. It runs fine from a folder in the root directory of my drive, but will not run from the cloned folder.
The really strange thing is, running it from a cloned version in my GitHub folder on my home computer works fine. It’s just an issue on my work computer.

I had the same problem, and I found out that any SPACE in the path made it unable to read (like in «/program files/») so i made a python folder on C:/ and it works now

For me nothing solved this issue so far. One time i installed python to C:/ without folders, and i got an error saying there was no pip module. Still can’t figure out how to fix it.

I tried loading python via the windows terminal. It couldn’t execute the programme.

I noticed the «py» command worked so I did «where py»

My py.exe was in C:/Windows

I’d already installed python and added it to the PATH so I copied the python.exe from my installation folder to the C:/Windows folder

Then ran webui-user.bat and everything is now working perfectly.

That did not work dor me, sadly

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

This was the solution to error 9009 in my case

Doesn’t work for me

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct.
Edited webui-user.bat — PYTHON=C:Python310python.exe
Always reinstalling after unninstalling previous one.

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set»
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up.
I’m especially interested in your graphics card

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up. I’m especially interested in your graphics card

Got enough ram as well as GpuCpu
Gigabyte Nvidia 2060 super gaming oc 8gb, 16gb ram, cpu 4 core 3.7

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up. I’m especially interested in your graphics card

Got enough ram as well as GpuCpu Gigabyte Nvidia 2060 super gaming oc 8gb, 16gb ram, cpu 4 core 3.7

Change COMMANDLINE_ARGS= to COMMANDLINE_ARGS=—medvram
and then
Launch webui-user.bat, Open it as normal user, not as administrator.

If that doesn’t work, I’ll give you an alternative solution

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up. I’m especially interested in your graphics card

Got enough ram as well as GpuCpu Gigabyte Nvidia 2060 super gaming oc 8gb, 16gb ram, cpu 4 core 3.7

Change COMMANDLINE_ARGS= to COMMANDLINE_ARGS=—medvram and then Launch webui-user.bat, Open it as normal user, not as administrator.

If that doesn’t work, I’ll give you an alternative solution

Same

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up. I’m especially interested in your graphics card

Got enough ram as well as GpuCpu Gigabyte Nvidia 2060 super gaming oc 8gb, 16gb ram, cpu 4 core 3.7

Change COMMANDLINE_ARGS= to COMMANDLINE_ARGS=—medvram and then Launch webui-user.bat, Open it as normal user, not as administrator.
If that doesn’t work, I’ll give you an alternative solution

Same

Step 1: Install Git (page)
-When installing, make sure to check the box for ‘Windows Explorer integration -> Git Bash’

Step 2: Clone the WebUI repo to your desired location:
-Right-click anywhere and select ‘Git Bash here’
-Enter git clone https://github.com/AUTOMATIC1111/stable-diffusion-webui
(Note: to update, all you need to do is is type git pull within the newly made webui folder)

Step 3: Download your preferred model(s):

Step 4: Rename your .ckpt file to «model.ckpt», and place it in the /models/Stable-diffusionfolder
-You can have as many models as you want in the folder, «model.ckpt» is just the one it will load by default

Step 5: Download Miniconda HERE. Download Miniconda 3

Step 6: Install Miniconda in the default location. Install for all users.
Uncheck «Register Miniconda as the system Python 3.9» unless you want to

Step 7: Open Anaconda Prompt (miniconda3)

Step 8: In Miniconda, navigate to the /stable-diffusion-webui folder wherever you downloaded using «cd» to jump folders.
(Or just type «cd» followed by a space, and then drag the folder into the Anaconda prompt.)

Step 9: Type the following commands to make an environment and install the necessary dependencies:
conda create --name qwe
(You can name it whatever you want instead of qwe)

conda activate qwe
conda install python
conda install git
webui-user.bat

(Note: it may seem like it’s stuck on «Installing torch» in the beginning. This is normal and should take 10-15 minutes)
It should now be ready to use

Usage:

Navigate to /stable-diffusion-webui in Miniconda

Type conda activate qwe
(You will need to type ‘conda activate qwe’ every time you wish to run webui)

Type webui-user.bat

After loading the model it should give you a LAN address such as ‘127.0.0.1:7860’
Enter the address into your browser to enter the GUI environment

@XuanRTS

When I open the webui-user.bat I got this error
‘CALL C:pythonpython.exe -c «import sys; print(sys.executable)»‘ is not recognized as an internal or external command, operable program or batch file. Creating venv in directory venv using python Unable to create venv in directory venv
exit code: 9009
stderr: ‘-m’ is not recognized as an internal or external command, operable program or batch file.
Launch unsuccessful. Exiting. Press any key to continue . . .
Is there anything wrong when I install python or anything else?

Uninstall Python, install it again, don’t forget to check the «PATH» box when installing, then when editing the .bat, write this: Here’s an example:
set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
This was the solution to error 9009 in my case

Doesn’t work for me

It depends on where you installed Python, change the path according to where it is installed

I’ve reinstalled Python many times in different directories, manually edited Path when it was needed, tried rebooting, still nothing works.

Tell me step by step how-you run the file and what you write inside. Also, when reinstalling it is better not to install the program over the old one, but to uninstall the previous one.

Run Python installer as admin, checked path, checked ‘for all users’, custom directory C: (tried default as well ofc), after installation is complete I checked in env.variables if Path is correct. Edited webui-user.bat — PYTHON=C:Python310python.exe Always reinstalling after unninstalling previous one.

When you edit a file, you should write «set» set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe

There is set, I’ve copy pasted here without Set by mistake…

@echo off

set PYTHON=C:UsersYouAppDataLocalProgramsPythonPython310python.exe
set GIT=
set VENV_DIR=
set COMMANDLINE_ARGS=--precision full --no-half --medvram

call webui.bat

All right, try it with this code and tell me if it works for you, I think I already figured out what your problem is.

Alas, same error

Tell me your computer’s set-up. I’m especially interested in your graphics card

Got enough ram as well as GpuCpu Gigabyte Nvidia 2060 super gaming oc 8gb, 16gb ram, cpu 4 core 3.7

Change COMMANDLINE_ARGS= to COMMANDLINE_ARGS=—medvram and then Launch webui-user.bat, Open it as normal user, not as administrator.
If that doesn’t work, I’ll give you an alternative solution

Same

Step 1: Install Git (page) -When installing, make sure to check the box for ‘Windows Explorer integration -> Git Bash’

Step 2: Clone the WebUI repo to your desired location: -Right-click anywhere and select ‘Git Bash here’ -Enter git clone https://github.com/AUTOMATIC1111/stable-diffusion-webui (Note: to update, all you need to do is is type git pull within the newly made webui folder)

Step 3: Download your preferred model(s):

Step 4: Rename your .ckpt file to «model.ckpt», and place it in the /models/Stable-diffusionfolder -You can have as many models as you want in the folder, «model.ckpt» is just the one it will load by default

Step 5: Download Miniconda HERE. Download Miniconda 3

Step 6: Install Miniconda in the default location. Install for all users. Uncheck «Register Miniconda as the system Python 3.9» unless you want to

Step 7: Open Anaconda Prompt (miniconda3)

Step 8: In Miniconda, navigate to the /stable-diffusion-webui folder wherever you downloaded using «cd» to jump folders. (Or just type «cd» followed by a space, and then drag the folder into the Anaconda prompt.)

Step 9: Type the following commands to make an environment and install the necessary dependencies: conda create --name qwe (You can name it whatever you want instead of qwe)

conda activate qwe
conda install python
conda install git
webui-user.bat

(Note: it may seem like it’s stuck on «Installing torch» in the beginning. This is normal and should take 10-15 minutes) It should now be ready to use

Usage:

Navigate to /stable-diffusion-webui in Miniconda

Type conda activate qwe (You will need to type ‘conda activate qwe’ every time you wish to run webui)

Type webui-user.bat

After loading the model it should give you a LAN address such as ‘127.0.0.1:7860’ Enter the address into your browser to enter the GUI environment

Nice, I’ll try it once I’ve got some free time, thank you very much